| Age | Commit message (Collapse) | Author |
|---|
|
Pass mount flags to sget() so that it can use them in initialising a new
superblock before the set function is called. They could also be passed to the
compare function.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
New field of struct super_block - ->s_max_links. Maximal allowed
value of ->i_nlink or 0; in the latter case all checks still need
to be done in ->link/->mkdir/->rename instances. Note that this
limit applies both to directoris and to non-directories.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Or hit an assertion in map_invalidatepage() instead.
Signed-off-by: Joern Engel <joern@logfs.org>
|
|
While unmounting the file system LogFS calls generic_shutdown_super.
The function does file system independent superblock shutdown.
However, it might result in call file system specific inode eviction.
LogFS marks FS shutting down by setting bit LOGFS_SB_FLAG_SHUTDOWN in
super->s_flags. Since, inode eviction might call truncate on inode,
following BUG is observed when file system is unmounted:
------------[ cut here ]------------
kernel BUG at /home/prasad/logfs/segment.c:362!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU 3
Modules linked in: logfs binfmt_misc ppdev virtio_blk parport_pc lp
parport psmouse floppy virtio_pci serio_raw virtio_ring virtio
Pid: 1933, comm: umount Not tainted 3.0.0+ #4 Bochs Bochs
RIP: 0010:[<ffffffffa008c841>] [<ffffffffa008c841>]
logfs_segment_write+0x211/0x230 [logfs]
RSP: 0018:ffff880062d7b9e8 EFLAGS: 00010202
RAX: 000000000000000e RBX: ffff88006eca9000 RCX: 0000000000000000
RDX: ffff88006fd87c40 RSI: ffffea00014ff468 RDI: ffff88007b68e000
RBP: ffff880062d7ba48 R08: 8000000020451430 R09: 0000000000000000
R10: dead000000100100 R11: 0000000000000000 R12: ffff88006fd87c40
R13: ffffea00014ff468 R14: ffff88005ad0a460 R15: 0000000000000000
FS: 00007f25d50ea760(0000) GS:ffff88007fd80000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000d05e48 CR3: 0000000062c72000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process umount (pid: 1933, threadinfo ffff880062d7a000,
task ffff880070b44500)
Stack:
ffff880062d7ba38 ffff88005ad0a508 0000000000001000 0000000000000000
8000000020451430 ffffea00014ff468 ffff880062d7ba48 ffff88005ad0a460
ffff880062d7bad8 ffffea00014ff468 ffff88006fd87c40 0000000000000000
Call Trace:
[<ffffffffa0088fee>] logfs_write_i0+0x12e/0x190 [logfs]
[<ffffffffa0089360>] __logfs_write_rec+0x140/0x220 [logfs]
[<ffffffffa0089312>] __logfs_write_rec+0xf2/0x220 [logfs]
[<ffffffffa00894a4>] logfs_write_rec+0x64/0xd0 [logfs]
[<ffffffffa0089616>] __logfs_write_buf+0x106/0x110 [logfs]
[<ffffffffa008a19e>] logfs_write_buf+0x4e/0x80 [logfs]
[<ffffffffa008a6b8>] __logfs_write_inode+0x98/0x110 [logfs]
[<ffffffffa008a7c4>] logfs_truncate+0x54/0x290 [logfs]
[<ffffffffa008abfc>] logfs_evict_inode+0xdc/0x190 [logfs]
[<ffffffff8115eef5>] evict+0x85/0x170
[<ffffffff8115f126>] iput+0xe6/0x1b0
[<ffffffff8115b4a8>] shrink_dcache_for_umount_subtree+0x218/0x280
[<ffffffff8115ce91>] shrink_dcache_for_umount+0x51/0x90
[<ffffffff8114796c>] generic_shutdown_super+0x2c/0x100
[<ffffffffa008cc47>] logfs_kill_sb+0x57/0xf0 [logfs]
[<ffffffff81147de5>] deactivate_locked_super+0x45/0x70
[<ffffffff811487ea>] deactivate_super+0x4a/0x70
[<ffffffff81163934>] mntput_no_expire+0xa4/0xf0
[<ffffffff8116469f>] sys_umount+0x6f/0x380
[<ffffffff814dd46b>] system_call_fastpath+0x16/0x1b
Code: 55 c8 49 8d b6 a8 00 00 00 45 89 f9 45 89 e8 4c 89 e1 4c 89 55
b8 c7 04 24 00 00 00 00 e8 68 fc ff ff 4c 8b 55 b8 e9 3c ff ff ff <0f>
0b 0f 0b c7 45 c0 00 00 00 00 e9 44 fe ff ff 66 66 66 66 66
RIP [<ffffffffa008c841>] logfs_segment_write+0x211/0x230 [logfs]
RSP <ffff880062d7b9e8>
---[ end trace fe6b040cea952290 ]---
Therefore, move super->s_flags setting after the fs-indenpendent work
has been finished.
Reviewed-by: Joern Engel <joern@logfs.org>
Signed-off-by: Prasad Joshi <prasadjoshi.linux@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux
* 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits)
Revert "tracing: Include module.h in define_trace.h"
irq: don't put module.h into irq.h for tracking irqgen modules.
bluetooth: macroize two small inlines to avoid module.h
ip_vs.h: fix implicit use of module_get/module_put from module.h
nf_conntrack.h: fix up fallout from implicit moduleparam.h presence
include: replace linux/module.h with "struct module" wherever possible
include: convert various register fcns to macros to avoid include chaining
crypto.h: remove unused crypto_tfm_alg_modname() inline
uwb.h: fix implicit use of asm/page.h for PAGE_SIZE
pm_runtime.h: explicitly requires notifier.h
linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h
miscdevice.h: fix up implicit use of lists and types
stop_machine.h: fix implicit use of smp.h for smp_processor_id
of: fix implicit use of errno.h in include/linux/of.h
of_platform.h: delete needless include <linux/module.h>
acpi: remove module.h include from platform/aclinux.h
miscdevice.h: delete unnecessary inclusion of module.h
device_cgroup.h: delete needless include <linux/module.h>
net: sch_generic remove redundant use of <linux/module.h>
net: inet_timewait_sock doesnt need <linux/module.h>
...
Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in
- drivers/media/dvb/frontends/dibx000_common.c
- drivers/media/video/{mt9m111.c,ov6650.c}
- drivers/mfd/ab3550-core.c
- include/linux/dmaengine.h
|
|
memchr_inv() is mainly used to check whether the whole buffer is filled
with just a specified byte.
The function name and prototype are stolen from logfs and the
implementation is from SLUB.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Christoph Lameter <cl@linux-foundation.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Matt Mackall <mpm@selenic.com>
Acked-by: Joern Engel <joern@logfs.org>
Cc: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Some files were using the complete module.h infrastructure without
actually including the header at all. Fix them up in advance so
once the implicit presence is removed, we won't get failures like this:
CC [M] fs/nfsd/nfssvc.o
fs/nfsd/nfssvc.c: In function 'nfsd_create_serv':
fs/nfsd/nfssvc.c:335: error: 'THIS_MODULE' undeclared (first use in this function)
fs/nfsd/nfssvc.c:335: error: (Each undeclared identifier is reported only once
fs/nfsd/nfssvc.c:335: error: for each function it appears in.)
fs/nfsd/nfssvc.c: In function 'nfsd':
fs/nfsd/nfssvc.c:555: error: implicit declaration of function 'module_put_and_exit'
make[3]: *** [fs/nfsd/nfssvc.o] Error 1
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
In particular, s_freeing_list needs to be initialized early, since it is
used on some of the error paths when mounts fail. The mapping inode,
for example, would be initialized and then free'd on an error path
before s_freeing_list was initialized, but the inode drop operation
needs the s_freeing_list to be set up.
Normally you'd never see this, because not only is logfs fairly rare,
but a successful mount will never have any issues.
Reported-by: werner <w.landgraf@ru.ru>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
a) switch ->put_device() to logfs_super *
b) actually call it on early failures in logfs_get_sb_device()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
take logfs_get_sb_device() calls to logfs_get_sb() itself
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
take setting s_bdev/s_mtd/s_devops to callers of logfs_get_sb_device(),
don't bother passing them separately
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
move allocation of logfs_super to logfs_get_sb, pass it to
logfs_get_sb_...().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
ordering problems at ->kill_sb() time are solved by doing iput()
of these suckers in ->put_super()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/joern/logfs:
logfs: handle powerfail on NAND flash
logfs: handle errors from get_mtd_device()
logfs: remove unused variable
logfs: fix sync
logfs: fix compile failure
logfs: initialize li->li_refcount
logfs: commit reservations under space pressure
logfs: survive logfs_buf_recover read errors
logfs: Close i_ino reuse race
logfs: fix logfs_seek_hole()
logfs: Return -EINVAL if filesystem image doesn't match
LogFS: Fix typo in b6349ac8
logfs: testing the wrong variable
|
|
iput() is needed *until* we'd done successful d_alloc_root()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
When CONFIG_BLOCK is not enabled:
fs/logfs/super.c:142: error: implicit declaration of function 'bdev_get_queue'
fs/logfs/super.c:142: error: invalid type argument of '->' (have 'int')
Found by Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Joern Engel <joern@logfs.org>
|
|
Signed-off-by: Joern Engel <joern@logfs.org>
|
|
There is a typo here. We should test "last" instead of "first".
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Joern Engel <joern@logfs.org>
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/joern/logfs:
[LogFS] Split large truncated into smaller chunks
[LogFS] Set s_bdi
[LogFS] Prevent mempool_destroy NULL pointer dereference
[LogFS] Move assertion
[LogFS] Plug 8 byte information leak
[LogFS] Prevent memory corruption on large deletes
[LogFS] Remove unused method
Fix trivial conflict with added header includes in fs/logfs/super.c
|
|
Since 32a88aa1 sync() was turned into a NOP for logfs. Worse, sync()
would not return an error, giving the illusion that writeout had
actually happened.
Afaics jffs2 was broken as well.
Signed-off-by: Joern Engel <joern@logfs.org>
|
|
It would probably be better to just accept NULL pointers in
mempool_destroy(). But for the current -rc series let's keep things
simple.
This patch was lost in the cracks for a while.
Kevin Cernekee <cernekee@gmail.com> had to rediscover the problem and
send a similar patch because of it. :(
Signed-off-by: Joern Engel <joern@logfs.org>
|
|
Removing sufficiently large files would create aliases for a large
number of segments. This in turn results in a large number of journal
entries and an overflow of s_je_array.
Cheap fix is to add a BUG_ON, turning memory corruption into something
annoying, but less dangerous. Real fix is to count the number of
affected segments and prevent the problem completely.
Signed-off-by: Joern Engel <joern@logfs.org>
|
|
|
|
implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
|
|
Found by Al Viro.
Signed-off-by: Joern Engel <joern@logfs.org>
|
|
rootdir was already allocated, so we must iput it again.
Found by Al Viro.
Signed-off-by: Joern Engel <joern@logfs.org>
|
|
If the first superblock is wrong and the second gets written, there
will still be a mismatch on next mount. Write both to make sure they
match.
Signed-off-by: Joern Engel <joern@logfs.org>
|
|
logfs_recover_sb() needs it open.
Signed-off-by: Joern Engel <joern@logfs.org>
|
|
|
|
This prevents unnecessary journal writes. More importantly it prevents
an oops due to a journal write on failed mount.
|
|
Erases for block devices were always just emulated by writing 0xff.
Some time back the write was removed and only the page cache was
changed to 0xff. Superficialy a good idea with two problems:
1. Touching the page cache isn't necessary either.
2. However, writing out 0xff _is_ necessary for the journal. As the
journal is scanned linearly, an old non-overwritten commit entry
can be used on next mount and cause havoc.
This should fix both aspects.
|
|
This is a new flash file system. See
Documentation/filesystems/logfs.txt
Signed-off-by: Joern Engel <joern@logfs.org>
|
