| Age | Commit message (Collapse) | Author |
|---|
|
This should be a bitwise negate here. It silences a Sparse warning:
fs/nfsd/nfs4xdr.c:693:16: warning: dubious: x & !y
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Again, these checks are better in the xdr code.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
I'd rather put more of these sorts of checks into standardized xdr
decoders for the various types rather than have them cluttering up the
core logic in nfs4proc.c and nfs4state.c.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Use a separate stateid idr per client, and lookup a stateid by first
finding the client, then looking up the stateid relative to that client.
Also some minor refactoring.
This allows us to improve error returns: we can return expired when the
clientid is not found and bad_stateid when the clientid is found but not
the stateid, as opposed to returning expired for both cases.
I hope this will also help to replace the state lock mostly by a
per-client lock, but that hasn't been done yet.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Test_stateid is 4.1-only and only allowed after a sequence operation, so
this check is unnecessary.
Cc: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Keep around an unhashed copy of the final stateid after the last close
using an openowner, and when identifying a replay, match against that
stateid instead of just against the open owner id. Free it the next
time the seqid is bumped or the stateowner is destroyed.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
For checking the size of reply before calling a operation,
we need try to get maxsize of the operation's reply.
v3: using new method as Bruce said,
"we could handle operations in two different ways:
- For operations that actually change something (write, rename,
open, close, ...), do it the way we're doing it now: be
very careful to estimate the size of the response before even
processing the operation.
- For operations that don't change anything (read, getattr, ...)
just go ahead and do the operation. If you realize after the
fact that the response is too large, then return the error at
that point.
So we'd add another flag to op_flags: say, OP_MODIFIES_SOMETHING. And for
operations with OP_MODIFIES_SOMETHING set, we'd do the first thing. For
operations without it set, we'd do the second."
Signed-off-by: Mi Jinlong <mijinlong@cn.fujitsu.com>
[bfields@redhat.com: crash, don't attempt to handle, undefined op_rsize_bop]
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
The current code is sort of hackish in that it assumes a referral is always
matched to an export. When we add support for junctions that may not be the
case.
We can replace nfsd4_path() with a function that encodes the components
directly from the dentries. Since nfsd4_path is currently the only user of
the 'ex_pathname' field in struct svc_export, this has the added benefit
of allowing us to get rid of that.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
The stateowner has some fields that only make sense for openowners, and
some that only make sense for lockowners, and I find it a lot clearer if
those are separated out.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Maybe we'll bring it back some day, but we don't have much real use for
it now.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Now that the replay owner is in the cstate we can remove it from a lot
of other individual operations and further simplify
nfs4_preprocess_seqid_op().
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Set the stateowner associated with a replay in one spot in
nfs4_preprocess_seqid_op() and keep it in cstate. This allows removing
a few lines of boilerplate from all the nfs4_preprocess_seqid_op()
callers.
Also turn ENCODE_SEQID_OP_TAIL into a function while we're here.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
The values here represent highest slotid numbers. Since slotid's are
numbered starting from zero, the highest should be one less than the
number of slots.
Reported-by: Rick Macklem <rmacklem@uoguelph.ca>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
The nfsd4 code has a bunch of special exceptions for error returns which
map nfserr_symlink to other errors.
In fact, the spec makes it clear that nfserr_symlink is to be preferred
over less specific errors where possible.
The patch that introduced it back in 2.6.4 is "kNFSd: correct symlink
related error returns.", which claims that these special exceptions are
represent an NFSv4 break from v2/v3 tradition--when in fact the symlink
error was introduced with v4.
I suspect what happened was pynfs tests were written that were overly
faithful to the (known-incomplete) rfc3530 error return lists, and then
code was fixed up mindlessly to make the tests pass.
Delete these unnecessary exceptions.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
A slightly unconventional approach to make the code more compact I could
live with, but let's give the poor reader *some* chance.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
The set of errors here does *not* agree with the set of errors specified
in the rfc!
While we're there, turn this macros into a function, for the usual
reasons, and move it to the one place where it's actually used.
Cc: stable@kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
It's sort of ridiculous that we've never had a working reply cache for
NFSv4.
On the other hand, we may still not: our current reply cache is likely
not very good, especially in the TCP case (which is the only case that
matters for v4). What we really need here is some serious testing.
Anyway, here's a start.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
This simplifies cleanup a bit.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
This operation is used by the client to check the validity of a list of
stateids.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
This operation is used by the client to tell the server to free a
stateid.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
This also fixes a number of sparse warnings.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: J. Bruce Fields <bfields@fieldses.org>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Compiling gave me this warning:
fs/nfsd/nfs4xdr.c: In function ‘nfsd4_decode_bind_conn_to_session’:
fs/nfsd/nfs4xdr.c:427:6: warning: variable ‘dummy’ set but not used
[-Wunused-but-set-variable]
The local variable "dummy" wasn't being used past the READ32() macro that
set it. READ_BUF() should ensure that the xdr buffer is pushed past the
data read into dummy already, so nothing needs to be read in.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
[bfields@redhat.com: minor comment fixup.]
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
RFC 5661 Section 18.11.3
The clientid field of the owner MAY be set to any value by the client
and MUST be ignored by the server. The reason the server MUST ignore
the clientid field is that the server MUST derive the client ID from
the session ID from the SEQUENCE operation of the COMPOUND request.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
We must not use dummy for index.
After the first index, READ32(dummy) will change dummy!!!!
Signed-off-by: Mi Jinlong <mijinlong@cn.fujitsu.com>
[bfields@redhat.com: Trond points out READ_BUF alone is sufficient.]
Cc: stable@kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Index i was already used in the outer loop
Cc: stable@kernel.org
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
These functions return an nfs status, not a host_err. So don't
try to convert before returning.
This is a regression introduced by
3c726023402a2f3b28f49b9d90ebf9e71151157d; I fixed up two of the callers,
but missed these two.
Cc: stable@kernel.org
Reported-by: Herbert Poetzl <herbert@13thfloor.at>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Implement the SEQ4_STATUS_CB_PATH_DOWN flag.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Basic xdr and processing for BIND_CONN_TO_SESSION. This adds a
connection to the list of connections associated with a session.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
This avoids the need for the confusing ESRCH mapping.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
These are internal nfsd interfaces.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
We no longer need a few of these special cases.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
The secinfo_no_name code oopses on encoding with
BUG: unable to handle kernel NULL pointer dereference at 00000044
IP: [<e2bd239a>] nfsd4_encode_secinfo+0x1c/0x1c1 [nfsd]
We should implement a nfsd4_encode_secinfo_no_name() instead using
nfsd4_encode_secinfo().
Signed-off-by: Mi Jinlong <mijinlong@cn.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Implementation of this operation is mandatory for NFSv4.1.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
According to RFC, the argument of ssv_sp_parms4 is:
struct ssv_sp_parms4 {
state_protect_ops4 ssp_ops;
sec_oid4 ssp_hash_algs<>;
sec_oid4 ssp_encr_algs<>;
uint32_t ssp_window;
uint32_t ssp_num_gss_handles;
};
If client send a exchange_id with SP4_SSV, server cann't decode
the SP4_SSV's ssp_hash_algs and ssp_encr_algs arguments correctly.
Because the kernel treat the two arguments as a signal
sec_oid4 struct, but should be a set of sec_oid4 struct.
Signed-off-by: Mi Jinlong <mijinlong@cn.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
The existing code adjusted it based on the worst case scenario for the returned
bitmap and the best case scenario for the supported attrs attribute.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[bfields@redhat.com: removed likely/unlikely's]
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (96 commits)
no need for list_for_each_entry_safe()/resetting with superblock list
Fix sget() race with failing mount
vfs: don't hold s_umount over close_bdev_exclusive() call
sysv: do not mark superblock dirty on remount
sysv: do not mark superblock dirty on mount
btrfs: remove junk sb_dirt change
BFS: clean up the superblock usage
AFFS: wait for sb synchronization when needed
AFFS: clean up dirty flag usage
cifs: truncate fallout
mbcache: fix shrinker function return value
mbcache: Remove unused features
add f_flags to struct statfs(64)
pass a struct path to vfs_statfs
update VFS documentation for method changes.
All filesystems that need invalidate_inode_buffers() are doing that explicitly
convert remaining ->clear_inode() to ->evict_inode()
Make ->drop_inode() just return whether inode needs to be dropped
fs/inode.c:clear_inode() is gone
fs/inode.c:evict() doesn't care about delete vs. non-delete paths now
...
Fix up trivial conflicts in fs/nilfs2/super.c
|
|
We'll need the path to implement the flags field for statvfs support.
We do have it available in all callers except:
- ecryptfs_statfs. This one doesn't actually need vfs_statfs but just
needs to do a caller to the lower filesystem statfs method.
- sys_ustat. Add a non-exported statfs_by_dentry helper for it which
doesn't won't be able to fill out the flags field later on.
In addition rename the helpers for statfs vs fstatfs to do_*statfs instead
of the misleading vfs prefix.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Christoph points that the NFSv2/v3 callers know which case they want
here, so we may as well just call the file=NULL case directly instead of
making this conditional.
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Note the session has to be put() here regardless of what happens to the
client.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
This is a mandatory operation. Also, here (not in open) is where we
should be committing the reboot recovery information.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
Get a refcount on the client on SEQUENCE,
Release the refcount and renew the client when all respective compounds completed.
Do not expire the client by the laundromat while in use.
If the client was expired via another path, free it when the compounds
complete and the refcount reaches 0.
Note that unhash_client_locked must call list_del_init on cl_lru as
it may be called twice for the same client (once from nfs4_laundromat
and then from expire_client)
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
Conflicts:
fs/nfsd/nfs4callback.c
|
|
'cs' is already computed, re-use it.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
In the replay case, the
renew_client(session->se_client);
happens after we've droppped the sessionid_lock, and without holding a
reference on the session; so there's nothing preventing the session
being freed before we get here.
Thanks to Benny Halevy for catching a bug in an earlier version of this
patch.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Acked-by: Benny Halevy <bhalevy@panasas.com>
|
|
When read_buf is called to move over to the next page in the pagelist
of an NFSv4 request, it sets argp->end to essentially a random
number, certainly not an address within the page which argp->p now
points to. So subsequent calls to READ_BUF will think there is much
more than a page of spare space (the cast to u32 ensures an unsigned
comparison) so we can expect to fall off the end of the second
page.
We never encountered thsi in testing because typically the only
operations which use more than two pages are write-like operations,
which have their own decoding logic. Something like a getattr after a
write may cross a page boundary, but it would be very unusual for it to
cross another boundary after that.
Cc: stable@kernel.org
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
|
|
|
|
Conflicts:
Documentation/filesystems/proc.txt
arch/arm/mach-u300/include/mach/debug-macro.S
drivers/net/qlge/qlge_ethtool.c
drivers/net/qlge/qlge_main.c
drivers/net/typhoon.c
|
|
Instead of accessing the lease time directly, some users call
nfs4_lease_time(), and some a macro, NFSD_LEASE_TIME, defined as
nfs4_lease_time(). Neither layer of indirection serves any purpose.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
