| Age | Commit message (Collapse) | Author |
|---|
|
In struct nfs4_ace remove the member who and replace it with an
anonymous union holding who_uid and who_gid. Allowing typesafe
storage uids and gids.
Add a helper pace_gt for sorting posix_acl_entries.
In struct posix_user_ace_state to replace uid with a union
of kuid_t uid and kgid_t gid.
Remove all initializations of the deprecated posic_acl_entry
e_id field. Which is not present when user namespaces are enabled.
Split find_uid into two functions find_uid and find_gid that work
in a typesafe manner.
In nfs4xdr update nfsd4_encode_fattr to deal with the changes
in struct nfs4_ace.
Rewrite nfsd4_encode_name to take a kuid_t and a kgid_t instead
of a generic id and flag if it is a group or a uid. Replace
the group flag with a test for a valid gid.
Modify nfsd4_encode_user to take a kuid_t and call the modifed
nfsd4_encode_name.
Modify nfsd4_encode_group to take a kgid_t and call the modified
nfsd4_encode_name.
Modify nfsd4_encode_aclname to take an ace instead of taking the
fields of an ace broken out. This allows it to detect if the ace is
for a user or a group and to pass the appropriate value while still
being typesafe.
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
When reading uids and gids off the wire convert them to
kuids and kgids. If the conversion results in an invalid
result don't set the ATTR_UID or ATTR_GID.
When putting kuids and kgids onto the wire first convert
them to uids and gids the other side will understand.
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
When reading uids and gids off the wire convert them to kuids and
kgids.
When putting kuids and kgids onto the wire first convert them to uids
and gids the other side will understand.
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
These trivial macros that don't currently do anything are the last
vestiages of an old attempt at uid mapping that was removed from the
kernel in September of 2002. Remove them to make it clear what the
code is currently doing.
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Convert nfsd_map_name_to_uid to return a kuid_t value.
Convert nfsd_map_name_to_gid to return a kgid_t value.
Convert nfsd_map_uid_to_name to take a kuid_t parameter.
Convert nfsd_map_gid_to_name to take a kgid_t paramater.
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
u32 and uid_t have the same size and semantics so this change
should have no operational effect. This just removes the WTF
factor when looking at variables that hold both uids and gids
whos type is uid_t.
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
This reverts commit 79f77bf9a4e3dd5ead006b8f17e7c4ff07d8374e.
This is obviously wrong, and I have no idea how I missed seeing the
warning in testing: I must just not have looked at the right logs. The
caller bumps rq_resused/rq_next_page, so it will always be hit on a
large enough read.
Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Note the stateid is hashed early on in init_stid(), but isn't currently
being unhashed on error paths.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Cc: Tigran Mkrtchyan <kofemann@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
It may be a matter of personal taste, but I find this makes the code
clearer.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
As far as I can tell this shouldn't currently happen--or if it does,
something is wrong and data is going to be corrupted.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
If the argument and reply together exceed the maximum payload size, then
a reply with a read-like operation can overlow the rq_pages array.
Cc: stable@kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
To ensure ordering of read data with any following operations, turn off
zero copy if the read is not the final operation in the compound.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
If len == 0 we end up with size = (0 - 1), which could cause bad things
to happen in copy_from_user().
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
I honestly have no idea where I got 129 from, but it's a much bigger
value than the actual buffer size (INET6_ADDRSTRLEN).
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Since NFSd service is per-net now, we have to pass proper network
context in nfsd_shutdown() from NFSd kthreads.
The simplest way I found is to get proper net from one of transports
with permanent sockets.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Function nfsd_shutdown is called from two places: nfsd_last_thread (when last
kernel thread is exiting) and nfsd_svc (in case of kthreads starting error).
When calling from nfsd_svc(), we can be sure that per-net resources are
allocated, so we don't need to check per-net nfsd_net_up boolean flag.
This allows us to remove nfsd_shutdown function at all and move check for
per-net nfsd_net_up boolean flag to nfsd_last_thread.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Since we have generic NFSd resurces, we have to introduce some way how to
allocate and destroy those resources on first per-net NFSd start and on
last per-net NFSd stop respectively.
This patch replaces global boolean nfsd_up flag (which is unused now) by users
counter and use it to determine either we need to allocate generic resources
or destroy them.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
This patch moves nfsd_startup_generic() and nfsd_shutdown_generic()
calls to nfsd_startup_net() and nfsd_shutdown_net() respectively, which
allows us to call nfsd_startup_net() instead of nfsd_startup() and makes
the code look clearer. It also modifies nfsd_svc() and nfsd_shutdown()
to check nn->nfsd_net_up instead of global nfsd_up. The latter is now
used only for generic resources shutdown and is currently useless. It
will replaced by NFSd users counter later in this series.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
NFSd have per-net resources and resources, used globally.
Let's move generic resources init and shutdown to separated functions since
they are going to be allocated on first NFSd service start and destroyed after
last NFSd service shutdown.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
This patch makes main step in NFSd containerisation.
There could be different approaches to how to make NFSd able to handle
incoming RPC request from different network namespaces. The two main
options are:
1) Share NFSd kthreads betwween all network namespaces.
2) Create separated pool of threads for each namespace.
While first approach looks more flexible, second one is simpler and
non-racy. This patch implements the second option.
To make it possible to allocate separate pools of threads, we have to
make it possible to allocate separate NFSd service structures per net.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
This is simple: an NFSd service can be started at different times in
different network environments. So, its "boot time" has to be assigned
per net.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
This patch introduces introduces per-net "nfsd_net_up" boolean flag, which has
the same purpose as general "nfsd_up" flag - skip init or shutdown of per-net
resources in case of they are inited on shutted down respectively.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
NFSd resources are partially per-net and partially globally used.
This patch splits resources init and shutdown and moves per-net code to
separated functions.
Generic and per-net init and shutdown are called sequentially for a while.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Precursor patch. Hard-coded "init_net" will be replaced by proper one in
future.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Precursor patch. Hard-coded "init_net" will be replaced by proper one in
future.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Precursor patch. Hard-coded "init_net" will be replaced by proper one in
future.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Precursor patch. Hard-coded "init_net" will be replaced by proper one in
future.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Precursor patch. Hard-coded "init_net" will be replaced by proper one in
future.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Precursor patch. Hard-coded "init_net" will be replaced by proper one in
future.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
There could be a situation, when NFSd was started in one network namespace, but
stopped in another one.
This will trigger kernel panic, because RPCBIND client is stored on per-net
NFSd data, and will be NULL on NFSd shutdown.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
With NFSv4, if we create a file then open it we explicit avoid checking
the permissions on the file during the open because the fact that we
created it ensures we should be allow to open it (the create and the
open should appear to be a single operation).
However if the reply to an EXCLUSIVE create gets lots and the client
resends the create, the current code will perform the permission check -
because it doesn't realise that it did the open already..
This patch should fix this.
Note that I haven't actually seen this cause a problem. I was just
looking at the code trying to figure out a different EXCLUSIVE open
related issue, and this looked wrong.
(Fix confirmed with pynfs 4.0 test OPEN4--bfields)
Cc: stable@kernel.org
Signed-off-by: NeilBrown <neilb@suse.de>
[bfields: use OWNER_OVERRIDE and update for 4.1]
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Pointer to client tracking operations - client_tracking_ops - have to be
containerized, because different environment can support different trackers
(for example, legacy tracker currently is not suported in container).
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Fix nfsd4_lockt and release_lockowner to lookup the referenced client,
so that it can renew it, or correctly return "expired", as appropriate.
Also share some code while we're here.
Reported-by: Frank Filz <ffilzlnx@us.ibm.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Write the client's ip address to any state file and all appropriate
state for that client will be forgotten.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Controlling the read and write functions allows me to add in "forget
client w.x.y.z", since we won't be limited to reading and writing only
u64 values.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
I also log basic information that I can figure out about the type of
state (such as number of locks for each client IP address). This can be
useful for checking that state was actually dropped and later for
checking if the client was able to recover.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
The eventual goal is to forget state based on ip address, so it makes
sense to call this function in a for-each-client loop until the correct
amount of state is forgotten. I also use this patch as an opportunity
to rename the forget function from "func()" to "forget()".
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Once I have a client, I can easily use its delegation list rather than
searching the file hash table for delegations to remove.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Using "forget_n_state()" forces me to implement the code needed to
forget a specific client's openowners.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
I use the new "forget_n_state()" function to iterate through each client
first when searching for locks. This may slow down forgetting locks a
little bit, but it implements most of the code needed to forget a
specified client's locks.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
I added in a generic for-each loop that takes a pass over the client_lru
list for the current net namespace and calls some function. The next few
patches will update other operations to use this function as well. A value
of 0 still means "forget everything that is found".
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Each function touches state in some way, so getting the lock earlier
can help simplify code.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
There were only a small number of functions in this file and since they
all affect stored state I think it makes sense to put them in state.h
instead. I also dropped most static inline declarations since there are
no callers when fault injection is not enabled.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Grace time is a part of NFSv4 state engine, which is constructed per network
namespace.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Lease time is a part of NFSv4 state engine, which is constructed per network
namespace.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
This is a cleanup patch. Functions nfsd_pool_stats_open() and
nfsd_pool_stats_release() are declared in fs/nfsd/nfsd.h.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Flag in_grace is a part of client tracking state, which is network namesapce
aware. So let'a replace global static variable with per-net one.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
