| Age | Commit message (Collapse) | Author |
|---|
|
This inserts sanity check that refuses to mount a filesystem with
unsupported block size.
Previously, kernel code of nilfs was looking only limitation of
devices though mkfs.nilfs2 limits the range of block sizes; there was
no check that prevents rec_len overflow with larger block sizes.
With this change, block sizes larger than 64KB or smaller than 1KB
will get rejected explicitly by kernel.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
|
|
With 64KB blocksize, a directory entry can have size 64KB which does
not fit into 16 bits we have for entry length. So this patch stores
0xffff instead and converts value when read from / written to disk.
Nilfs derives its directory implementation from ext2 filesystem, and
this draws upon the corresponding change on ext2.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
|
|
Implementation of nilfs_get_page() is a bit old as below:
- A common read_mapping_page inline function is now available instead
of its read_cache_page use.
- wait_on_page_locked() use in the function is eliminable since
read_cache_page function does the same thing through wait_on_page_read().
- PageUptodate() check is eliminable for the same reason.
This renews nilfs_get_page() based on these points.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
|
|
This forces nilfs to check compatibility of feature flags so as to
reject a filesystem with unknown features when it mounts or remounts
the filesystem.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
|
|
This applies read-ahead to nilfs_btree_do_lookup and
nilfs_btree_lookup_contig functions and extends them to read ahead
siblings of level 1 btree nodes that hold data blocks.
At present, the read-ahead is not applied to most btree operations;
only get_block() callback function, which is used during read of
regular files or directories, receives the benefit.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
|
|
nilfs_btree_get_block() now may return untested buffer due to
read-ahead. This adds a new flag for buffer heads so that the btree
code can check whether the buffer is already verified or not.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
|
|
This adds __nilfs_btree_get_block() function that can issue a series
of read-ahead requests for sibling btree nodes.
This read-ahead needs parent node block, so nilfs_btree_readahead_info
structure is added to pass the information that
__nilfs_btree_get_block() needs.
This also replaces the previous nilfs_btree_get_block() implementation
with a wrapper function of __nilfs_btree_get_block().
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
|
|
This adds mode argument to nilfs_btnode_submit_block() function and
allows it to issue a read-ahead request.
An optional submit_ptr argument is also added to store the actual
block address for which bio is sent. submit_ptr is used for a series
of read-ahead requests, and helps to decide if each requested block is
continous to the previous one on disk.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
|
|
nilfs_btnode_submit_block() refers to buffer head just before
returning from the function, but it releases the buffer head earlier
than that if nilfs_dat_translate() gets an error.
This has potential for oops in the erroneous case. This fixes the
issue.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
|
|
This removes all inline uses from btree.c. Gcc now agressively apply
inline expansion even for the functions declared without the keyword;
the inline use in btree.c looks excessive.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
|
|
The patch "reduce repetitive calculation of max number of child nodes"
gathered up the calculation of maximum number of child nodes into
nilfs_btree_nchildren_per_block() function. This makes the function
get resultant value from a private variable in bmap object instead of
calculating it for each call.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
|
|
The current btree implementation repeats the same calculation on the
maximum number of child nodes. This is because a few low level
routines use the calculation for index addressing in a btree node
block.
This reduces the calculation by explicitly passing the maximum number
of child nodes (ncmax) through their argument.
This changes parameter passing of the following functions:
- nilfs_btree_node_dptrs
- nilfs_btree_node_get_ptr
- nilfs_btree_node_set_ptr
- nilfs_btree_node_init
- nilfs_btree_node_move_left
- nilfs_btree_node_move_right
- nilfs_btree_node_insert
- nilfs_btree_node_delete, and
- nilfs_btree_get_node
The following functions are removed:
- nilfs_btree_node_nchildren_min
- nilfs_btree_node_nchildren_max
Most middle level btree operations are rewritten to pass a proper
ncmax value depending on whether each occurrence of node is "root" or
not.
A constant NILFS_BTREE_ROOT_NCHILDREN_MAX is used for the root node,
whereas nilfs_btree_nchildren_per_block() function is used for
non-root nodes. If a node could be either root or a non-root node, an
output argument of nilfs_btree_get_node() is used to set up ncmax.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
|
|
nilfs_btree_node_nchildren_max() and nilfs_btree_node_nchildren_min()
functions switch return value depending on whether target node is the
root or a node block. In most uses of these functions, however, the
node type is fixed, and moreover the same calculation is repeatedly
performed in loop.
This unfold these functions depending on context and move them outside
loops wherever possible.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
|
|
nilfs_bmap_lookup and its variants are supposed to take a valid
pointer argument to return a block address, thus pointer checks in
nilfs_btree_lookup and nilfs_direct_lookup are needless.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
|
|
This removes nilfs_bmap_union and finally unifies three structures and
the union in bmap/btree code into one.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
|
|
This unifies two similar functions nilfs_btree_set_target_v and
nilfs_direct_set_target_v into one, nilfs_bmap_set_target_v.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
|
|
This replaces all uses of nilfs_btree struct in implementation of
btree mapping with nilfs_bmap struct.
Name of local variable "btree" is kept not to bloat amount of change.
And, a part of local variables "bmap" is renamed to "btree" to uniform
naming rule.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
|
|
This replaces all uses of nilfs_direct struct in implementation of
direct mapping with nilfs_bmap struct.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
|
|
The first argument of bops->bop_propagate operation takes a constant
qualifier, and causes compilation error when removed cast to pointer
of nilfs_btree structure type. This fixes the issue to prepare for
succesive removal of nilfs_btree struct.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
|
|
Will remove nilfs_bmap_key_to_dkey(), nilfs_bmap_dkey_to_key(),
nilfs_bmap_ptr_to_dptr(), and nilfs_bmap_dptr_to_ptr() for simplicity.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
|
|
This inserts sanity checks soon after read btree node from disk. This
allows early detection of broken btree nodes, and helps to narrow down
problems due to file system corruption.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
|
|
According to the report titled "problem with nilfs_cleanerd" from
Łukasz Wójcicki, nilfs_btree_lookup_dirty_buffers or
nilfs_btree_add_dirty_buffer got memory violation during garbage
collection.
This could happen if a level field of given btree node buffer is
incorrect, which is a crucial internal bug.
This inserts a sanity check to figure out the problem.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
|
|
This adds is_remount argument to the parse_options() function that
obtains mount options from strings.
Previously, parse_options did not distinguish context whether it's
called for a new mount or remount, so the caller needed additional
verifications outside the function.
This allows parse_options to verify options and print messages
depending on the context.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
|
|
This replaces seq_printf() with seq_puts() in nilfs_show_options for
mount options which have no argument.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
|
|
Nilfs has "discard" mount option which issues discard/TRIM commands to
underlying block device, but it lacks a complementary option and has
no way to disable the feature through remount.
This adds "nodiscard" option to resolve this imbalance.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
|
|
Nilfs enables write barriers by default and has "nobarrier" mount
option to disable this feature. But it lacks the complementary option
and has no way to re-enable the feature on remount.
This adds "barrier" option to resolve this imbalance.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
|
|
Super blocks of nilfs are periodically overwritten in order to record
the recent log position. This shortens recovery time after unclean
unmount, but the current implementation performs the update even for a
few blocks of change. If the filesystem gets small changes slowly and
continually, super blocks may be updated excessively.
This moderates the issue by skipping update of log cursor if it does
not cross a segment boundary.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
|
|
Although nilfs redundantly uses two super blocks and each may point to
different position on log, the current version of nilfs does not try
fallback to the spare super block when it doesn't find any valid log
at the position that the primary super block points to.
This has been a cause of mount failures due to write order reversals
on barrier less block devices.
This inserts fallback code in error path of nilfs_search_super_root
routine to resolve the mount failure problem.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
|
|
nilfs_search_super_root can return -ENOMEM, but this error code is not
described in its kernel-doc comment. This fixes the discrepancy.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
|
|
This separates a setup routine of log cursor from init_nilfs(). The
routine, nilfs_store_log_cursor, reads the last position of the log
containing a super root, and initializes relevant state on the nilfs
object.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
|
|
This will sync super blocks in turns instead of syncing duplicate
super blocks at the time. This will help searching valid super root
when super block is written into disk before log is written, which is
happen when barrier-less block devices are unmounted uncleanly. In
the situation, old super block likely points to valid log.
This patch introduces ns_sbwcount member to the nilfs object and adds
nilfs_sb_will_flip() function; ns_sbwcount counts how many times super
blocks write back to the disk. And, nilfs_sb_will_flip() decides
whether flipping required or not based on the count of ns_sbwcount to
sync super blocks asymmetrically.
The following functions are also changed:
- nilfs_prepare_super(): flips super blocks according to the
argument. The argument is calculated by nilfs_sb_will_flip()
function.
- nilfs_cleanup_super(): sets "clean" flag to both super blocks if
they point to the same checkpoint.
To update both of super block information, caller of
nilfs_commit_super must set the information on both super blocks.
Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
|
|
This function checks validity of super block pointers.
If first super block is invalid, it will swap the super blocks.
The function should be called before any super block information updates.
Caller must obtain nilfs->ns_sem.
Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
|
|
This moves out section that updates information of the recent log
position stored in super blocks from nilfs_commit_super to a new
routine named nilfs_set_log_cursor.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
|
|
This function marks error state and write it on super blocks. This is
a preparation for making super block writeback alternately.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
|
|
This function write out filesystem state to super blocks in order to
share the same cleanup work. This is a preparation for making super
block writeback alternately.
Cc: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
|
|
Mount time field in super block is wrongly updated when nilfs remounts
the partition from read-write to read-only. This fixes the issue.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
|
|
This counter is unused.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
|
|
This removes macros to test segment summary flags and redefines a few
relevant macros with inline functions.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
|
|
This will get rid of nilfs_segsum_info use from recovery functions for
simplicity.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
|
|
load_segment_summary function has two distinct roles: getting summary
header of a log, and verifying consistencies of the log.
This divide it into two corresponding functions, nilfs_read_log_header
and nilfs_validate_log to clarify the meaning.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
|
|
The function name of nilfs_recover_logical_segments makes no sense.
This changes the name into nilfs_salvage_orphan_logs to clarify the
role of the function.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
|
|
Most functions in recovery code take an argument of a super block
instance or a nilfs_sb_info struct for convenience sake.
This replaces them aggressively with a nilfs object by applying
__bread and __breadahead against routines using sb_bread and
sb_breadahead.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
|
|
This stores blocksize in nilfs objects for the successive refactoring
of recovery logic.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
|
|
The commit 41c88bd7 ("nilfs2: cleanup multi
kmem_cache_{create,destroy} code") consolidated slab constructors and
destructors used in nilfs, but it left some declarations in header
files.
This gets rid of the obsolete declarations.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
|
|
This gets rid of unwanted space chars in front of conditional
sentences of nilfs_destroy_cachep().
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
|
|
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (69 commits)
fix handling of offsets in cris eeprom.c, get rid of fake on-stack files
get rid of home-grown mutex in cris eeprom.c
switch ecryptfs_write() to struct inode *, kill on-stack fake files
switch ecryptfs_get_locked_page() to struct inode *
simplify access to ecryptfs inodes in ->readpage() and friends
AFS: Don't put struct file on the stack
Ban ecryptfs over ecryptfs
logfs: replace inode uid,gid,mode initialization with helper function
ufs: replace inode uid,gid,mode initialization with helper function
udf: replace inode uid,gid,mode init with helper
ubifs: replace inode uid,gid,mode initialization with helper function
sysv: replace inode uid,gid,mode initialization with helper function
reiserfs: replace inode uid,gid,mode initialization with helper function
ramfs: replace inode uid,gid,mode initialization with helper function
omfs: replace inode uid,gid,mode initialization with helper function
bfs: replace inode uid,gid,mode initialization with helper function
ocfs2: replace inode uid,gid,mode initialization with helper function
nilfs2: replace inode uid,gid,mode initialization with helper function
minix: replace inode uid,gid,mode init with helper
ext4: replace inode uid,gid,mode init with helper
...
Trivial conflict in fs/fs-writeback.c (mark bitfields unsigned)
|
|
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Conflicts:
fs/ext3/fsync.c
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
Snapshots and regular ro/rw mounts are essentially-different within
the meaning whether the checkpoint is static or not and is marked with
a snapshot flag or not.
The current implemenation, however, allows to remount a snapshot to a
regular rw-mount if the checkpoint number equals the latest one.
This transition is actually impossible since changing a checkpoint to
a snapshot makes another checkpoint, thus the condition is never
satisfied.
This fixes the weird state of affairs, and specifically separates
snapshots and regular rw/ro-mounts.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
|
