| Age | Commit message (Collapse) | Author |
|---|
|
In commit 30e2bab, ext3 fixed it. So change it accordingly in ocfs2.
Steps to reproduce:
# touch aaa
# stat -c %Z aaa
1283760364
# setfacl -m 'u::x,g::x,o::x' aaa
# stat -c %Z aaa
1283760364
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
mmotm/fs/ocfs2/cluster/tcp.c: In function ‘o2net_send_message_vec’:
mmotm/fs/ocfs2/cluster/tcp.c:980:6: warning: ‘ret’ may be used uninitialized in this function
It seems a real bug introduced by commit 9af0b38ff3 (ocfs2/net:
Use wait_event() in o2net_send_message_vec()).
cc: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
This patch tries to handle the case in which list 'dlm->tracking_list' is
empty, to avoid accessing an invalid pointer. It fixes the following oops:
http://oss.oracle.com/bugzilla/show_bug.cgi?id=1287
Signed-off-by: Tristan Ye <tristan.ye@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
In ocfs2_dx_dir_rebalance(), we need to rejournal_acess the blocks after
calling ocfs2_insert_extent() since growing an extent tree may trigger
ocfs2_extend_trans(), which makes previous journal_access meaningless.
Signed-off-by: Tristan Ye <tristan.ye@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
This patch change mutex_lock to a new subclass and
add a new inode lock subclass for the target inode
which caused this lockdep warning.
=============================================
[ INFO: possible recursive locking detected ]
2.6.35+ #5
---------------------------------------------
reflink/11086 is trying to acquire lock:
(Meta){+++++.}, at: [<ffffffffa06f9d65>] ocfs2_reflink_ioctl+0x898/0x1229 [ocfs2]
but task is already holding lock:
(Meta){+++++.}, at: [<ffffffffa06f9aa0>] ocfs2_reflink_ioctl+0x5d3/0x1229 [ocfs2]
other info that might help us debug this:
6 locks held by reflink/11086:
#0: (&sb->s_type->i_mutex_key#15/1){+.+.+.}, at: [<ffffffff820e09ec>] lookup_create+0x26/0x97
#1: (&sb->s_type->i_mutex_key#15){+.+.+.}, at: [<ffffffffa06f99a0>] ocfs2_reflink_ioctl+0x4d3/0x1229 [ocfs2]
#2: (Meta){+++++.}, at: [<ffffffffa06f9aa0>] ocfs2_reflink_ioctl+0x5d3/0x1229 [ocfs2]
#3: (&oi->ip_xattr_sem){+.+.+.}, at: [<ffffffffa06f9b58>] ocfs2_reflink_ioctl+0x68b/0x1229 [ocfs2]
#4: (&oi->ip_alloc_sem){+.+.+.}, at: [<ffffffffa06f9b67>] ocfs2_reflink_ioctl+0x69a/0x1229 [ocfs2]
#5: (&sb->s_type->i_mutex_key#15/2){+.+...}, at: [<ffffffffa06f9d4f>] ocfs2_reflink_ioctl+0x882/0x1229 [ocfs2]
stack backtrace:
Pid: 11086, comm: reflink Not tainted 2.6.35+ #5
Call Trace:
[<ffffffff82063dd9>] validate_chain+0x56e/0xd68
[<ffffffff82062275>] ? mark_held_locks+0x49/0x69
[<ffffffff82064d6d>] __lock_acquire+0x79a/0x7f1
[<ffffffff82065a81>] lock_acquire+0xc6/0xed
[<ffffffffa06f9d65>] ? ocfs2_reflink_ioctl+0x898/0x1229 [ocfs2]
[<ffffffffa06c9ade>] __ocfs2_cluster_lock+0x975/0xa0d [ocfs2]
[<ffffffffa06f9d65>] ? ocfs2_reflink_ioctl+0x898/0x1229 [ocfs2]
[<ffffffffa06e107b>] ? ocfs2_wait_for_recovery+0x15/0x8a [ocfs2]
[<ffffffffa06cb6ea>] ocfs2_inode_lock_full_nested+0x1ac/0xdc5 [ocfs2]
[<ffffffffa06f9d65>] ? ocfs2_reflink_ioctl+0x898/0x1229 [ocfs2]
[<ffffffff820623a0>] ? trace_hardirqs_on_caller+0x10b/0x12f
[<ffffffff82060193>] ? debug_mutex_free_waiter+0x4f/0x53
[<ffffffffa06f9d65>] ocfs2_reflink_ioctl+0x898/0x1229 [ocfs2]
[<ffffffffa06ce24a>] ? ocfs2_file_lock_res_init+0x66/0x78 [ocfs2]
[<ffffffff820bb2d2>] ? might_fault+0x40/0x8d
[<ffffffffa06df9f6>] ocfs2_ioctl+0x61a/0x656 [ocfs2]
[<ffffffff820ee5d3>] ? mntput_no_expire+0x1d/0xb0
[<ffffffff820e07b3>] ? path_put+0x2c/0x31
[<ffffffff820e53ac>] vfs_ioctl+0x2a/0x9d
[<ffffffff820e5903>] do_vfs_ioctl+0x45d/0x4ae
[<ffffffff8233a7f6>] ? _raw_spin_unlock+0x26/0x2a
[<ffffffff8200299c>] ? sysret_check+0x27/0x62
[<ffffffff820e59ab>] sys_ioctl+0x57/0x7a
[<ffffffff8200296b>] system_call_fastpath+0x16/0x1b
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
As the name shows, we shouldn't have any lock in
ocfs2_xattr_get_nolock. so lift ip_xattr_sem to the caller.
This should be safe for us since the only 2 callers are:
1. ocfs2_xattr_get which will lock the resources.
2. ocfs2_mknod which don't need this locking.
And this also resolves the following lockdep warning.
=======================================================
[ INFO: possible circular locking dependency detected ]
2.6.35+ #5
-------------------------------------------------------
reflink/30027 is trying to acquire lock:
(&oi->ip_alloc_sem){+.+.+.}, at: [<ffffffffa0673b67>] ocfs2_reflink_ioctl+0x69a/0x1226 [ocfs2]
but task is already holding lock:
(&oi->ip_xattr_sem){++++..}, at: [<ffffffffa0673b58>] ocfs2_reflink_ioctl+0x68b/0x1226 [ocfs2]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #3 (&oi->ip_xattr_sem){++++..}:
[<ffffffff82064d6d>] __lock_acquire+0x79a/0x7f1
[<ffffffff82065a81>] lock_acquire+0xc6/0xed
[<ffffffff82339650>] down_read+0x34/0x47
[<ffffffffa0691cb8>] ocfs2_xattr_get_nolock+0xa0/0x4e6 [ocfs2]
[<ffffffffa069d64f>] ocfs2_get_acl_nolock+0x5c/0x132 [ocfs2]
[<ffffffffa069d9c7>] ocfs2_init_acl+0x60/0x243 [ocfs2]
[<ffffffffa066499d>] ocfs2_mknod+0xae8/0xfea [ocfs2]
[<ffffffffa0665041>] ocfs2_create+0x9d/0x105 [ocfs2]
[<ffffffff820e1c83>] vfs_create+0x9b/0xf4
[<ffffffff820e20bb>] do_last+0x2fd/0x5be
[<ffffffff820e31c0>] do_filp_open+0x1fb/0x572
[<ffffffff820d6cf6>] do_sys_open+0x5a/0xe7
[<ffffffff820d6dac>] sys_open+0x1b/0x1d
[<ffffffff8200296b>] system_call_fastpath+0x16/0x1b
-> #2 (jbd2_handle){+.+...}:
[<ffffffff82064d6d>] __lock_acquire+0x79a/0x7f1
[<ffffffff82065a81>] lock_acquire+0xc6/0xed
[<ffffffffa0604ff8>] start_this_handle+0x4a3/0x4bc [jbd2]
[<ffffffffa06051d6>] jbd2__journal_start+0xba/0xee [jbd2]
[<ffffffffa0605218>] jbd2_journal_start+0xe/0x10 [jbd2]
[<ffffffffa065ca34>] ocfs2_start_trans+0xb7/0x19b [ocfs2]
[<ffffffffa06645f3>] ocfs2_mknod+0x73e/0xfea [ocfs2]
[<ffffffffa0665041>] ocfs2_create+0x9d/0x105 [ocfs2]
[<ffffffff820e1c83>] vfs_create+0x9b/0xf4
[<ffffffff820e20bb>] do_last+0x2fd/0x5be
[<ffffffff820e31c0>] do_filp_open+0x1fb/0x572
[<ffffffff820d6cf6>] do_sys_open+0x5a/0xe7
[<ffffffff820d6dac>] sys_open+0x1b/0x1d
[<ffffffff8200296b>] system_call_fastpath+0x16/0x1b
-> #1 (&journal->j_trans_barrier){.+.+..}:
[<ffffffff82064d6d>] __lock_acquire+0x79a/0x7f1
[<ffffffff82064fa9>] lock_release_non_nested+0x1e5/0x24b
[<ffffffff82065999>] lock_release+0x158/0x17a
[<ffffffff823389f6>] __mutex_unlock_slowpath+0xbf/0x11b
[<ffffffff82338a5b>] mutex_unlock+0x9/0xb
[<ffffffffa0679673>] ocfs2_free_ac_resource+0x31/0x67 [ocfs2]
[<ffffffffa067c6bc>] ocfs2_free_alloc_context+0x11/0x1d [ocfs2]
[<ffffffffa0633de0>] ocfs2_write_begin_nolock+0x141e/0x159b [ocfs2]
[<ffffffffa0635523>] ocfs2_write_begin+0x11e/0x1e7 [ocfs2]
[<ffffffff820a1297>] generic_file_buffered_write+0x10c/0x210
[<ffffffffa0653624>] ocfs2_file_aio_write+0x4cc/0x6d3 [ocfs2]
[<ffffffff820d822d>] do_sync_write+0xc2/0x106
[<ffffffff820d897b>] vfs_write+0xae/0x131
[<ffffffff820d8e55>] sys_write+0x47/0x6f
[<ffffffff8200296b>] system_call_fastpath+0x16/0x1b
-> #0 (&oi->ip_alloc_sem){+.+.+.}:
[<ffffffff82063f92>] validate_chain+0x727/0xd68
[<ffffffff82064d6d>] __lock_acquire+0x79a/0x7f1
[<ffffffff82065a81>] lock_acquire+0xc6/0xed
[<ffffffff82339694>] down_write+0x31/0x52
[<ffffffffa0673b67>] ocfs2_reflink_ioctl+0x69a/0x1226 [ocfs2]
[<ffffffffa06599f6>] ocfs2_ioctl+0x61a/0x656 [ocfs2]
[<ffffffff820e53ac>] vfs_ioctl+0x2a/0x9d
[<ffffffff820e5903>] do_vfs_ioctl+0x45d/0x4ae
[<ffffffff820e59ab>] sys_ioctl+0x57/0x7a
[<ffffffff8200296b>] system_call_fastpath+0x16/0x1b
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
ocfs2_create_inode_in_orphan() is used by reflink to create the newly
reflinked inode simultaneously in the orphan dir. This allows us to easily
handle partially-reflinked files during recovery cleanup.
We have a problem though - the orphan dir stringifies inode # to determine
a unique name under which the orphan entry dirent can be created. Since
ocfs2_create_inode_in_orphan() needs the space allocated in the orphan dir
before it can allocate the inode, we currently call into the orphan code:
/*
* We give the orphan dir the root blkno to fake an orphan name,
* and allocate enough space for our insertion.
*/
status = ocfs2_prepare_orphan_dir(osb, &orphan_dir,
osb->root_blkno,
orphan_name, &orphan_insert);
Using osb->root_blkno might work fine on unindexed directories, but the
orphan dir can have an index. When it has that index, the above code fails
to allocate the proper index entry. Later, when we try to remove the file
from the orphan dir (using the actual inode #), the reflink operation will
fail.
To fix this, I created a function ocfs2_alloc_orphaned_file() which uses the
newly split out orphan and inode alloc code to figure out what the inode
block number will be (once allocated) and then prepare the orphan dir from
that data.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
|
|
We do this because ocfs2_create_inode_in_orphan() wants to order locking of
the orphan dir with respect to locking of the inode allocator *before*
making any changes to the directory.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
|
|
This allows code which needs to know the eventual block number of an inode
but can't allocate it yet due to transaction or lock ordering. For example,
ocfs2_create_inode_in_orphan() currently gives a junk blkno for preparation
of the orphan dir because it can't yet know where the actual inode is placed
- that code is actually in ocfs2_mknod_locked. This is a problem when the
orphan dirs are indexed as the junk inode number will create an index entry
which goes unused (and fails the later removal from the orphan dir). Now
with these interfaces, ocfs2_create_inode_in_orphan() can run the block
group search (and get back the inode block number) *before* any actual
allocation occurs.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
|
|
ocfs2_search_chain() makes the same updates as
ocfs2_alloc_dinode_update_counts to the alloc inode. Instead of open coding
the bitmap update, use our helper function.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
|
|
Do this by splitting the bulk of the function away from the inode allocation
code at the very tom of ocfs2_mknod_locked(). Existing callers don't need to
change and won't see any difference. The new function created,
__ocfs2_mknod_locked() will be used shortly.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
|
|
commit(6b933c8e6f1a2f3118082c455eef25f9b1ac7b45).
The patch is to fix the regression bug brought from commit 6b933c8...( 'ocfs2:
Avoid direct write if we fall back to buffered I/O'):
http://oss.oracle.com/bugzilla/show_bug.cgi?id=1285
The commit 6b933c8e6f1a2f3118082c455eef25f9b1ac7b45 changed __generic_file_aio_write
to generic_file_buffered_write, which didn't call filemap_{write,wait}_range to flush
the pagecaches when we were falling O_DIRECT writes back to buffered ones. it did hurt
the O_DIRECT semantics somehow in extented odirect writes.
This patch tries to guarantee O_DIRECT writes of 'fall back to buffered' to be correctly
flushed.
Signed-off-by: Tristan Ye <tristan.ye@oracle.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
|
|
We cannot call grab_cache_page() when holding filesystem locks or with
a transaction started as grab_cache_page() calls page allocation with
GFP_KERNEL flag and thus page reclaim can recurse back into the filesystem
causing deadlocks or various assertion failures. We have to use
find_or_create_page() instead and pass it GFP_NOFS as we do with other
allocations.
Acked-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
|
|
We were setting ac->ac_last_group in ocfs2_claim_suballoc_bits from
res->sr_bg_blkno. Unfortunately, res->sr_bg_blkno is going to be zero under
normal (non-fragmented) circumstances. The discontig block group patches
effectively turned off that feature. Fix this by correctly calculating what
the next group hint should be.
Acked-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Tested-by: Goldwyn Rodrigues <rgoldwyn@suse.de>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
|
|
We have added discontig block group now, and now an inode
can be allocated in an discontig block group. So get
it in ocfs2_get_suballoc_slot_bit.
The old ocfs2_test_suballoc_bit gets group block no
from the allocation inode which is wrong. Fix it by
passing the right group.
Acked-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
|
|
When 'barrier' mount option is specified, we have to issue a cache flush
during fdatasync(2). We have to do this even if inode doesn't have
I_DIRTY_DATASYNC set because we still have to get written *data* to disk so
that they are not lost in case of crash.
Acked-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Singed-off-by: Tao Ma <tao.ma@oracle.com>
|
|
__ocfs2_page_mkwrite now is broken in handling file end.
1. the last page should be the page contains i_size - 1.
2. the len in the last page is also calculated wrong.
So change them accordingly.
Acked-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
|
|
For local mounts, ocfs2_read_locked_inode() calls ocfs2_read_blocks_sync() to
read the inode off the disk. The latter first checks to see if that block is
cached in the journal, and, if so, returns that block. That is ok.
But ocfs2_read_locked_inode() goes wrong when it tries to validate the checksum
of such blocks. Blocks that are cached in the journal may not have had their
checksum computed as yet. We should not validate the checksums of such blocks.
Fixes ossbz#1282
http://oss.oracle.com/bugzilla/show_bug.cgi?id=1282
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Cc: stable@kernel.org
Singed-off-by: Tao Ma <tao.ma@oracle.com>
|
|
Like tools, the checksum validate function now prints the values in hex.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Singed-off-by: Tao Ma <tao.ma@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
O2net: Disallow o2net accept connection request from itself.
ocfs2/dlm: remove potential deadlock -V3
ocfs2/dlm: avoid incorrect bit set in refmap on recovery master
Fix the nested PR lock calling issue in ACL
ocfs2: Count more refcount records in file system fragmentation.
ocfs2 fix o2dlm dlm run purgelist (rev 3)
ocfs2/dlm: fix a dead lock
ocfs2: do not overwrite error codes in ocfs2_init_acl
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (96 commits)
no need for list_for_each_entry_safe()/resetting with superblock list
Fix sget() race with failing mount
vfs: don't hold s_umount over close_bdev_exclusive() call
sysv: do not mark superblock dirty on remount
sysv: do not mark superblock dirty on mount
btrfs: remove junk sb_dirt change
BFS: clean up the superblock usage
AFFS: wait for sb synchronization when needed
AFFS: clean up dirty flag usage
cifs: truncate fallout
mbcache: fix shrinker function return value
mbcache: Remove unused features
add f_flags to struct statfs(64)
pass a struct path to vfs_statfs
update VFS documentation for method changes.
All filesystems that need invalidate_inode_buffers() are doing that explicitly
convert remaining ->clear_inode() to ->evict_inode()
Make ->drop_inode() just return whether inode needs to be dropped
fs/inode.c:clear_inode() is gone
fs/inode.c:evict() doesn't care about delete vs. non-delete paths now
...
Fix up trivial conflicts in fs/nilfs2/super.c
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
... and let iput_final() do the actual eviction or retention
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Make sure we check the truncate constraints early on in ->setattr by adding
those checks to inode_change_ok. Also clean up and document inode_change_ok
to make this obvious.
As a fallout we don't have to call inode_newsize_ok from simple_setsize and
simplify it down to a truncate_setsize which doesn't return an error. This
simplifies a lot of setattr implementations and means we use truncate_setsize
almost everywhere. Get rid of fat_setsize now that it's trivial and mark
ext2_setsize static to make the calling convention obvious.
Keep the inode_newsize_ok in vmtruncate for now as all callers need an
audit for its removal anyway.
Note: setattr code in ecryptfs doesn't call inode_change_ok at all and
needs a deeper audit, but that is left for later.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Replace inode_setattr with opencoded variants of it in all callers. This
moves the remaining call to vmtruncate into the filesystem methods where it
can be replaced with the proper truncate sequence.
In a few cases it was obvious that we would never end up calling vmtruncate
so it was left out in the opencoded variant:
spufs: explicitly checks for ATTR_SIZE earlier
btrfs,hugetlbfs,logfs,dlmfs: explicitly clears ATTR_SIZE earlier
ufs: contains an opencoded simple_seattr + truncate that sets the filesize just above
In addition to that ncpfs called inode_setattr with handcrafted iattrs,
which allowed to trim down the opencoded variant.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Move the call to vmtruncate to get rid of accessive blocks to the callers
in prepearation of the new truncate calling sequence. This was only done
for DIO_LOCKING filesystems, so the __blockdev_direct_IO_newtrunc variant
was not needed anyway. Get rid of blockdev_direct_IO_no_locking and
its _newtrunc variant while at it as just opencoding the two additional
paramters is shorted than the name suffix.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (40 commits)
ext4: Adding error check after calling ext4_mb_regular_allocator()
ext4: Fix dirtying of journalled buffers in data=journal mode
ext4: re-inline ext4_rec_len_(to|from)_disk functions
jbd2: Remove t_handle_lock from start_this_handle()
jbd2: Change j_state_lock to be a rwlock_t
jbd2: Use atomic variables to avoid taking t_handle_lock in jbd2_journal_stop
ext4: Add mount options in superblock
ext4: force block allocation on quota_off
ext4: fix freeze deadlock under IO
ext4: drop inode from orphan list if ext4_delete_inode() fails
ext4: check to make make sure bd_dev is set before dereferencing it
jbd2: Make barrier messages less scary
ext4: don't print scary messages for allocation failures post-abort
ext4: fix EFBIG edge case when writing to large non-extent file
ext4: fix ext4_get_blocks references
ext4: Always journal quota file modifications
ext4: Fix potential memory leak in ext4_fill_super
ext4: Don't error out the fs if the user tries to make a file too big
ext4: allocate stripe-multiple IOs on stripe boundaries
ext4: move aio completion after unwritten extent conversion
...
Fix up conflicts in fs/ext4/inode.c as per Ted.
Fix up xfs conflicts as per earlier xfs merge.
|
|
Currently, o2net_accept_one() is allowed to accept a connection from
listening node itself, such a fake connection will not be successfully
established due to no handshake detected afterwards, and later end up
with triggering connecting worker in a loop.
We're going to fix this by treating such connection request as 'invalid',
since we've got no chance of requesting connection from a node to itself
in a OCFS2 cluster.
The fix doesn't hurt user's scan for o2net-listener, it always gets a
successful connection from userpace.
Signed-off-by: Tristan Ye <tristan.ye@oracle.com>
Acked-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
When we need to take both dlm_domain_lock and dlm->spinlock, we should take
them in order of: dlm_domain_lock then dlm->spinlock.
There is pathes disobey this order. That is calling dlm_lockres_put() with
dlm->spinlock held in dlm_run_purge_list. dlm_lockres_put() calls dlm_put() at
the ref and dlm_put() locks on dlm_domain_lock.
Fix:
Don't grab/put the dlm when the initialising/releasing lockres.
That grab is not required because we don't call dlm_unregister_domain()
based on refcount.
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Cc: stable@kernel.org
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
In the following situation, there remains an incorrect bit in refmap on the
recovery master. Finally the recovery master will fail at purging the lockres
due to the incorrect bit in refmap.
1) node A has no interest on lockres A any longer, so it is purging it.
2) the owner of lockres A is node B, so node A is sending de-ref message
to node B.
3) at this time, node B crashed. node C becomes the recovery master. it recovers
lockres A(because the master is the dead node B).
4) node A migrated lockres A to node C with a refbit there.
5) node A failed to send de-ref message to node B because it crashed. The failure
is ignored. no other action is done for lockres A any more.
For mormal, re-send the deref message to it to recovery master can fix it. Well,
ignoring the failure of deref to the original master and not recovering the lockres
to recovery master has the same effect. And the later is simpler.
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Acked-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Cc: stable@kernel.org
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
Hi,
Thanks a lot for all the review and comments so far;) I'd like to send
the improved (V4) version of this patch.
This patch fixes a deadlock in OCFS2 ACL. We found this bug in OCFS2
and Samba integration using scenario, the symptom is several smbd
processes will be hung under heavy workload. Finally we found out it
is the nested PR lock calling that leads to this deadlock:
node1 node2
gr PR
|
V
PR(EX)---> BAST:OCFS2_LOCK_BLOCKED
|
V
rq PR
|
V
wait=1
After requesting the 2nd PR lock, the process "smbd" went into D
state. It can only be woken up when the 1st PR lock's RO holder equals
zero. There should be an ocfs2_inode_unlock in the calling path later
on, which can decrement the RO holder. But since it has been in
uninterruptible sleep, the unlock function has no chance to be called.
The related stack trace is:
smbd D ffff8800013d0600 0 9522 5608 0x00000000
ffff88002ca7fb18 0000000000000282 ffff88002f964500 ffff88002ca7fa98
ffff8800013d0600 ffff88002ca7fae0 ffff88002f964340 ffff88002f964340
ffff88002ca7ffd8 ffff88002ca7ffd8 ffff88002f964340 ffff88002f964340
Call Trace:
[<ffffffff80350425>] schedule_timeout+0x175/0x210
[<ffffffff8034f580>] wait_for_common+0xf0/0x210
[<ffffffffa03e12b9>] __ocfs2_cluster_lock+0x3b9/0xa90 [ocfs2]
[<ffffffffa03e7665>] ocfs2_inode_lock_full_nested+0x255/0xdb0 [ocfs2]
[<ffffffffa0446019>] ocfs2_get_acl+0x69/0x120 [ocfs2]
[<ffffffffa0446368>] ocfs2_check_acl+0x28/0x80 [ocfs2]
[<ffffffff800e3507>] acl_permission_check+0x57/0xb0
[<ffffffff800e357d>] generic_permission+0x1d/0xc0
[<ffffffffa03eecea>] ocfs2_permission+0x10a/0x1d0 [ocfs2]
[<ffffffff800e3f65>] inode_permission+0x45/0x100
[<ffffffff800d86b3>] sys_chdir+0x53/0x90
[<ffffffff80007458>] system_call_fastpath+0x16/0x1b
[<00007f34a4ef6927>] 0x7f34a4ef6927
For details, please see:
https://bugzilla.novell.com/show_bug.cgi?id=614332 and
http://oss.oracle.com/bugzilla/show_bug.cgi?id=1278
Signed-off-by: Jiaju Zhang <jjzhang@suse.de>
Acked-by: Mark Fasheh <mfasheh@suse.com>
Cc: stable@kernel.org
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
The refcount record calculation in ocfs2_calc_refcount_meta_credits
is too optimistic that we can always allocate contiguous clusters
and handle an already existed refcount rec as a whole. Actually
because of file system fragmentation, we may have the chance to split
a refcount record into 3 parts during the transaction. So consider
the worst case in record calculation.
Cc: stable@kernel.org
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
This patch fixes two problems in dlm_run_purgelist
1. If a lockres is found to be in use, dlm_run_purgelist keeps trying to purge
the same lockres instead of trying the next lockres.
2. When a lockres is found unused, dlm_run_purgelist releases lockres spinlock
before setting DLM_LOCK_RES_DROPPING_REF and calls dlm_purge_lockres.
spinlock is reacquired but in this window lockres can get reused. This leads
to BUG.
This patch modifies dlm_run_purgelist to skip lockres if it's in use and purge
next lockres. It also sets DLM_LOCK_RES_DROPPING_REF before releasing the
lockres spinlock protecting it from getting reused.
Signed-off-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Acked-by: Sunil Mushran <sunil.mushran@oracle.com>
Cc: stable@kernel.org
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
When we have to take both dlm->master_lock and lockres->spinlock,
take them in order
lockres->spinlock and then dlm->master_lock.
The patch fixes a violation of the rule.
We can simply move taking dlm->master_lock to where we have dropped res->spinlock
since when we access res->state and free mle memory we don't need master_lock's
protection.
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Cc: stable@kernel.org
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
Setting the acl while creating a new inode depends on
the error codes of posix_acl_create_masq. This patch fix
a issue of overwriting the error codes of it.
Reported-by: Pawel Zawora <pzawora@gmail.com>
Cc: <stable@kernel.org> [ .33, .34 ]
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
|
|
Lockstat reports have shown that j_state_lock is a major source of
lock contention, especially on systems with more than 4 CPU cores. So
change it to be a read/write spinlock.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Filesystems with unwritten extent support must not complete an AIO request
until the transaction to convert the extent has been commited. That means
the aio_complete calls needs to be moved into the ->end_io callback so
that the filesystem can control when to call it exactly.
This makes a bit of a mess out of dio_complete and the ->end_io callback
prototype even more complicated.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Filesystems with unwritten extent support must not complete an AIO request
until the transaction to convert the extent has been commited. That means
the aio_complete calls needs to be moved into the ->end_io callback so
that the filesystem can control when to call it exactly.
This makes a bit of a mess out of dio_complete and the ->end_io callback
prototype even more complicated.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
ocfs2: Silence gcc warning in ocfs2_write_zero_page().
jbd2/ocfs2: Fix block checksumming when a buffer is used in several transactions
ocfs2/dlm: Remove BUG_ON from migration in the rare case of a down node
ocfs2: Don't duplicate pages past i_size during CoW.
ocfs2: tighten up strlen() checking
ocfs2: Make xattr reflink work with new local alloc reservation.
ocfs2: make xattr extension work with new local alloc reservation.
ocfs2: Remove the redundant cpu_to_le64.
ocfs2/dlm: don't access beyond bitmap size
ocfs2: No need to zero pages past i_size.
ocfs2: Zero the tail cluster when extending past i_size.
ocfs2: When zero extending, do it by page.
ocfs2: Limit default local alloc size within bitmap range.
ocfs2: Move orphan scan work to ocfs2_wq.
fs/ocfs2/dlm: Add missing spin_unlock
|
|
ocfs2_write_zero_page() has a loop that won't ever be skipped, but gcc
doesn't know that. Set ret=0 just to make gcc happy.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
OCFS2 uses t_commit trigger to compute and store checksum of the just
committed blocks. When a buffer has b_frozen_data, checksum is computed
for it instead of b_data but this can result in an old checksum being
written to the filesystem in the following scenario:
1) transaction1 is opened
2) handle1 is opened
3) journal_access(handle1, bh)
- This sets jh->b_transaction to transaction1
4) modify(bh)
5) journal_dirty(handle1, bh)
6) handle1 is closed
7) start committing transaction1, opening transaction2
8) handle2 is opened
9) journal_access(handle2, bh)
- This copies off b_frozen_data to make it safe for transaction1 to commit.
jh->b_next_transaction is set to transaction2.
10) jbd2_journal_write_metadata() checksums b_frozen_data
11) the journal correctly writes b_frozen_data to the disk journal
12) handle2 is closed
- There was no dirty call for the bh on handle2, so it is never queued for
any more journal operation
13) Checkpointing finally happens, and it just spools the bh via normal buffer
writeback. This will write b_data, which was never triggered on and thus
contains a wrong (old) checksum.
This patch fixes the problem by calling the trigger at the moment data is
frozen for journal commit - i.e., either when b_frozen_data is created by
do_get_write_access or just before we write a buffer to the log if
b_frozen_data does not exist. We also rename the trigger to t_frozen as
that better describes when it is called.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
For migration, we are waiting for DLM_LOCK_RES_MIGRATING flag to be set
before sending DLM_MIG_LOCKRES_MSG message to the target. We are using
dlm_migration_can_proceed() for that purpose. However, if the node is
down, dlm_migration_can_proceed() will also return "go ahead". In this
rare case, the DLM_LOCK_RES_MIGRATING flag might not be set yet. Remove
the BUG_ON() that trips over this condition.
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
During CoW, the pages after i_size don't contain valid data, so there's
no need to read and duplicate them.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
This function is only called from one place and it's like this:
dlm_register_domain(conn->cc_name, dlm_key, &fs_version);
The "conn->cc_name" is 64 characters long. If strlen(conn->cc_name)
were equal to O2NM_MAX_NAME_LEN (64) that would be a bug because
strlen() doesn't count the NULL character.
In fact, if you look how O2NM_MAX_NAME_LEN is used, it mostly describes
64 character buffers. The only exception is nd_name from struct
o2nm_node.
Anyway I looked into it and in this case the domain string comes from
osb->uuid_str in ocfs2_setup_osb_uuid(). That's 32 characters and NULL
which easily fits into O2NM_MAX_NAME_LEN. This patch doesn't change how
the code works, but I think it makes the code a little cleaner.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
The new reservation code in local alloc has add the limitation
that the caller should handle the case that the local alloc
doesn't give use enough contiguous clusters. It make the old
xattr reflink code broken.
So this patch udpate the xattr reflink code so that it can
handle the case that local alloc give us one cluster at a time.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
The old ocfs2_xattr_extent_allocation is too optimistic about
the clusters we can get. So actually if the file system is
too fragmented, ocfs2_add_clusters_in_btree will return us
with EGAIN and we need to allocate clusters once again.
So this patch change it to a while loop so that we can allocate
clusters until we reach clusters_to_add.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Cc: stable@kernel.org
|
|
In ocfs2_block_group_alloc, we set c_blkno by bg->bg_blkno.
But actually bg->bg_blkno is already changed to little endian
in ocfs2_block_group_fill. So remove the extra cpu_to_le64.
Reported-by: Marcos Matsunaga <Marcos.Matsunaga@oracle.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
