| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
ocfs2/dlm: Wait on lockres instead of erroring cancel requests
ocfs2: Add missing lock name
ocfs2: Don't oops in ocfs2_kill_sb on a failed mount
ocfs2: release the buffer head in ocfs2_do_truncate.
ocfs2: Handle quota file corruption more gracefully
|
|
In case a downconvert is queued, and a flock receives a signal,
BUG_ON(lockres->l_action != OCFS2_AST_INVALID) is triggered
because a lock cancel triggers a dlmunlock while an AST is
scheduled.
To avoid this, allow a LKM_CANCEL to pass through, and let it
wait on __dlm_wait_on_lockres().
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.de>
Acked-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
There is missing name for NFSSync cluster lock. This makes lockdep unhappy
because we end up passing NULL to lockdep when initializing lock key. Fix it.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
If we fail to mount the filesystem, we have to be careful not to dereference
uninitialized structures in ocfs2_kill_sb.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
In ocfs2_do_truncate, we forget to release last_eb_bh which
will cause memleak. So call brelse in the end.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
ocfs2_read_virt_blocks() does BUG when we try to read a block from a file
beyond its end. Since this can happen due to filesystem corruption, it
is not really an appropriate answer. Make ocfs2_read_quota_block() check
the condition and handle it by calling ocfs2_error() and returning EIO.
[ Modified to print ip_blkno in the error - Joel ]
Reported-by: Tristan Ye <tristan.ye@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: (22 commits)
ocfs2: Fix possible deadlock when extending quota file
ocfs2: keep index within status_map[]
ocfs2: Initialize the cluster we're writing to in a non-sparse extend
ocfs2: Remove redundant BUG_ON in __dlm_queue_ast()
ocfs2/quota: Release lock for error in ocfs2_quota_write.
ocfs2: Define credit counts for quota operations
ocfs2: Remove syncjiff field from quota info
ocfs2: Fix initialization of blockcheck stats
ocfs2: Zero out padding of on disk dquot structure
ocfs2: Initialize blocks allocated to local quota file
ocfs2: Mark buffer uptodate before calling ocfs2_journal_access_dq()
ocfs2: Make global quota files blocksize aligned
ocfs2: Use ocfs2_rec_clusters in ocfs2_adjust_adjacent_records.
ocfs2: Fix deadlock on umount
ocfs2: Add extra credits and access the modified bh in update_edge_lengths.
ocfs2: Fail ocfs2_get_block() immediately when a block needs allocation
ocfs2: Fix error return in ocfs2_write_cluster()
ocfs2: Fix compilation warning for fs/ocfs2/xattr.c
ocfs2: Initialize count in aio_write before generic_write_checks
ocfs2: log the actual return value of ocfs2_file_aio_write()
...
|
|
In OCFS2, allocator locks rank above transaction start. Thus we
cannot extend quota file from inside a transaction less we could
deadlock.
We solve the problem by starting transaction not already in
ocfs2_acquire_dquot() but only in ocfs2_local_read_dquot() and
ocfs2_global_read_dquot() and we allocate blocks to quota files before starting
the transaction. In case we crash, quota files will just have a few blocks
more but that's no problem since we just use them next time we extend the
quota file.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
Do not exceed array status_map[]
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
In a non-sparse extend, we correctly allocate (and zero) the clusters between
the old_i_size and pos, but we don't zero the portions of the cluster we're
writing to outside of pos<->len.
It handles clustersize > pagesize and blocksize < pagesize.
[Cleaned up by Joel Becker.]
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
We BUG_ON() the same thing twice.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.de>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
ocfs2_quota_write needs to release the lock if it fails to
read quota block. So use "goto out" instead of "return err".
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
Numbers of needed credits for some quota operations were written
as raw numbers. Create appropriate defines instead.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
syncjiff is just a converted value of syncms. Some places which
are updating syncms forgot to update syncjiff as well. Since the
conversion is just a simple division / multiplication and it does
not happen frequently, just remove the syncjiff field to avoid
forgotten conversions.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
We just set blockcheck stats to zeros but we should also
properly initialize the spinlock there.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
Padding fields of on-disk dquot structure were not zeroed. Zero them
so that it's easier to use them later.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
When we extend local quota file, we should initialize data
in newly allocated block. Firstly because on recovery we could
parse bogus data, secondly so that block checksums are properly
computed.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
In a code path extending local quota files we marked new header
buffer uptodate only after calling ocfs2_journal_access_dq() which
triggers a bug. Fix it and also call ocfs2 variant of the function
marking buffer uptodate.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
Change i_size of global quota files so that it always remains aligned to block
size. This is mainly because the end of quota block may contain checksum (if
checksumming is enabled) and it's a bit awkward for it to be "outside" of quota
file (and it makes life harder for ocfs2-tools).
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
In ocfs2_adjust_adjacent_records, we will adjust adjacent records
according to the extent_list in the lower level. But actually
the lower level tree will either be a leaf or a branch. If we only
use ocfs2_is_empty_extent we will meet with some problem if the lower
tree is a branch (tree_depth > 1). So use !ocfs2_rec_clusters instead.
And actually only the leaf record can have holes. So add a BUG_ON
for non-leaf branch.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
In commit ea455f8ab68338ba69f5d3362b342c115bea8e13, we moved the dentry lock
put process into ocfs2_wq. This causes problems during umount because ocfs2_wq
can drop references to inodes while they are being invalidated by
invalidate_inodes() causing all sorts of nasty things (invalidate_inodes()
ending in an infinite loop, "Busy inodes after umount" messages etc.).
We fix the problem by stopping ocfs2_wq from doing any further releasing of
inode references on the superblock being unmounted, wait until it finishes
the current round of releasing and finally cleaning up all the references in
dentry_lock_list from ocfs2_put_super().
The issue was tracked down by Tao Ma <tao.ma@oracle.com>.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
In normal tree rotation left process, we will never touch the tree
branch above subtree_index and ocfs2_extend_rotate_transaction doesn't
reserve the credits for them either.
But when we want to delete the rightmost extent block, we have to update
the rightmost records for all the rightmost branch(See
ocfs2_update_edge_lengths), so we have to allocate extra credits for them.
What's more, we have to access them also.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
ocfs2_get_block() does no allocation. Hole filling for writes should
have happened farther up in the call chain. We detect this case and
print an error, but we then continue with the function. We should be
exiting immediately.
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
A typo caused ocfs2_write_cluster() to return 0 in some error cases.
Fix it.
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
gcc 4.4.1 generates the following build warning on i386:
CC [M] fs/ocfs2/xattr.o
fs/ocfs2/xattr.c: In function ‘ocfs2_xattr_block_get’:
fs/ocfs2/xattr.c:1055: warning: ‘block_off’ may be used uninitialized in this function
The following fix is based on a similar approach by David Howells
few days back: http://lkml.org/lkml/2009/7/9/109,
Signed-off-by: Subrata Modak<subrata@linux.vnet.ibm.com>,
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
generic_write_checks() expects count to be initialized to the size of
the write. Writes to files open with O_DIRECT|O_LARGEFILE write 0 bytes
because count is uninitialized.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.de>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
* Remove smp_lock.h from files which don't need it (including some headers!)
* Add smp_lock.h to files which do need it
* Make smp_lock.h include conditional in hardirq.h
It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT
This will make hardirq.h inclusion cheaper for every PREEMPT=n config
(which includes allmodconfig/allyesconfig, BTW)
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
in ocfs2_file_aio_write(), log_exit() could don't log the value
which is really returned. this patch fixes it.
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
in dlmrecovery.c:1121, replace 'migrate' to 'migration' to keep the consistency
by comparing to other lines with the similar log info in the same file.
Signed-off-by: Jeff Liu <jeff.liu@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
If the mount fails for any reason, ocfs2_dismount_volume calls
ocfs2_orphan_scan_stop. It requires that ocfs2_orphan_scan_init
be called to setup the mutex and work queues, but that doesn't
happen if the mount has failed and we oops accessing an uninitialized
work queue.
This patch splits the init and startup of the orphan scan, eliminating
the oops.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
ocfs2/trivial: Wrap ocfs2_sysfile_cluster_lock_key within define.
ocfs2: Add lockdep annotations
vfs: Set special lockdep map for dirs only if not set by fs
ocfs2: Disable orphan scanning for local and hard-ro mounts
ocfs2: Do not initialize lvb in ocfs2_orphan_scan_lock_res_init()
ocfs2: Stop orphan scan as early as possible during umount
ocfs2: Fix ocfs2_osb_dump()
ocfs2: Pin journal head before accessing jh->b_committed_data
ocfs2: Update atime in splice read if necessary.
ocfs2: Provide the ocfs2_dlm_lvb_valid() stack API.
|
|
Actually ocfs2_sysfile_cluster_lock_key is only used if we enable
CONFIG_DEBUG_LOCK_ALLOC. Wrap it so that we can avoid a building
warning.
fs/ocfs2/sysfile.c:53: warning: ‘ocfs2_sysfile_cluster_lock_key’
defined but not used
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
Add lockdep support to OCFS2. The support also covers all of the cluster
locks except for open locks, journal locks, and local quotafile locks. These
are special because they are acquired for a node, not for a particular process
and lockdep cannot deal with such type of locking.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
Local and Hard-RO mounts do not need orphan scanning.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
We don't access the LVB in our ocfs2_*_lock_res_init() functions.
Since the LVB can become invalid during some cluster recovery
operations, the dlmglue must be able to handle an uninitialized
LVB.
For the orphan scan lock, we initialized an uninitialzed LVB with our
scan sequence number plus one. This starts a normal orphan scan
cycle.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
Currently if the orphan scan fires a tick before the user issues the umount,
the umount will wait for the queued orphan scan tasks to complete.
This patch makes the umount stop the orphan scan as early as possible so as
to reduce the probability of the queued tasks slowing down the umount.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
Skip printing information that is not valid for local mounts.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
This patch adds jbd_lock_bh_state() and jbd_unlock_bh_state() around accessses
to jh->b_committed_data.
Fixes oss bugzilla#1131
http://oss.oracle.com/bugzilla/show_bug.cgi?id=1131
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
We should call ocfs2_inode_lock_atime instead of ocfs2_inode_lock
in ocfs2_file_splice_read like we do in ocfs2_file_aio_read so
that we can update atime in splice read if necessary.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
The Lock Value Block (LVB) of a DLM lock can be lost when nodes die and
the DLM cannot reconstruct its state. Clients of the DLM need to know
this.
ocfs2's internal DLM, o2dlm, explicitly zeroes out the LVB when it loses
track of the state. This is not a standard behavior, but ocfs2 has
always relied on it. Thus, an o2dlm LVB is always "valid".
ocfs2 now supports both o2dlm and fs/dlm via the stack glue. When
fs/dlm loses track of an LVBs state, it sets a flag
(DLM_SBF_VALNOTVALID) on the Lock Status Block (LKSB). The contents of
the LVB may be garbage or merely stale.
ocfs2 doesn't want to try to guess at the validity of the stale LVB.
Instead, it should be checking the VALNOTVALID flag. As this is the
'standard' way of treating LVBs, we will promote this behavior.
We add a stack glue API ocfs2_dlm_lvb_valid(). It returns non-zero when
the LVB is valid. o2dlm will always return valid, while fs/dlm will
check VALNOTVALID.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Acked-by: Mark Fasheh <mfasheh@suse.com>
|
|
Follow-up to "block: enable by default support for large devices
and files on 32-bit archs".
Rename CONFIG_LBD to CONFIG_LBDAF to:
- allow update of existing [def]configs for "default y" change
- reflect that it is used also for large files support nowadays
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
ocfs2/net: Use wait_event() in o2net_send_message_vec()
ocfs2: Adjust rightmost path in ocfs2_add_branch.
ocfs2: fdatasync should skip unimportant metadata writeout
ocfs2: Remove redundant gotos in ocfs2_mount_volume()
ocfs2: Add statistics for the checksum and ecc operations.
ocfs2 patch to track delayed orphan scan timer statistics
ocfs2: timer to queue scan of all orphan slots
ocfs2: Correct ordering of ip_alloc_sem and localloc locks for directories
ocfs2: Fix possible deadlock in quota recovery
ocfs2: Fix possible deadlock with quotas in ocfs2_setattr()
ocfs2: Fix lock inversion in ocfs2_local_read_info()
ocfs2: Fix possible deadlock in ocfs2_global_read_dquot()
ocfs2: update comments in masklog.h
ocfs2: Don't printk the error when listing too many xattrs.
|
|
Replace wait_event_interruptible() with wait_event() in o2net_send_message_vec().
This is because this function is called by the dlm that expects signals to be
blocked.
Fixes oss bugzilla#1126
http://oss.oracle.com/bugzilla/show_bug.cgi?id=1126
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
In ocfs2_add_branch, we use the rightmost rec of the leaf extent block
to generate the e_cpos for the newly added branch. In the most case, it
is OK but if the parent extent block's rightmost rec covers more clusters
than the leaf does, it will cause kernel panic if we insert some clusters
in it. The message is something like:
(7445,1):ocfs2_insert_at_leaf:3775 ERROR: bug expression:
le16_to_cpu(el->l_next_free_rec) >= le16_to_cpu(el->l_count)
(7445,1):ocfs2_insert_at_leaf:3775 ERROR: inode 66053, depth 0, count 28,
next free 28, rec.cpos 270, rec.clusters 1, insert.cpos 275, insert.clusters 1
[<fa7ad565>] ? ocfs2_do_insert_extent+0xb58/0xda0 [ocfs2]
[<fa7b08f2>] ? ocfs2_insert_extent+0x5bd/0x6ba [ocfs2]
[<fa7b1b8b>] ? ocfs2_add_clusters_in_btree+0x37f/0x564 [ocfs2]
...
The panic can be easily reproduced by the following small test case
(with bs=512, cs=4K, and I remove all the error handling so that it looks
clear enough for reading).
int main(int argc, char **argv)
{
int fd, i;
char buf[5] = "test";
fd = open(argv[1], O_RDWR|O_CREAT);
for (i = 0; i < 30; i++) {
lseek(fd, 40960 * i, SEEK_SET);
write(fd, buf, 5);
}
ftruncate(fd, 1146880);
lseek(fd, 1126400, SEEK_SET);
write(fd, buf, 5);
close(fd);
return 0;
}
The reason of the panic is that:
the 30 writes and the ftruncate makes the file's extent list looks like:
Tree Depth: 1 Count: 19 Next Free Rec: 1
## Offset Clusters Block#
0 0 280 86183
SubAlloc Bit: 7 SubAlloc Slot: 0
Blknum: 86183 Next Leaf: 0
CRC32: 00000000 ECC: 0000
Tree Depth: 0 Count: 28 Next Free Rec: 28
## Offset Clusters Block# Flags
0 0 1 143368 0x0
1 10 1 143376 0x0
...
26 260 1 143576 0x0
27 270 1 143584 0x0
Now another write at 1126400(275 cluster) whiich will write at the gap
between 271 and 280 will trigger ocfs2_add_branch, but the result after
the function looks like:
Tree Depth: 1 Count: 19 Next Free Rec: 2
## Offset Clusters Block#
0 0 280 86183
1 271 0 143592
So the extent record is intersected and make the following operation bug out.
This patch just try to remove the gap before we add the new branch, so that
the root(branch) rightmost rec will cover the same right position. So in the
above case, before adding branch the tree will be changed to
Tree Depth: 1 Count: 19 Next Free Rec: 1
## Offset Clusters Block#
0 0 271 86183
SubAlloc Bit: 7 SubAlloc Slot: 0
Blknum: 86183 Next Leaf: 0
CRC32: 00000000 ECC: 0000
Tree Depth: 0 Count: 28 Next Free Rec: 28
## Offset Clusters Block# Flags
0 0 1 143368 0x0
1 10 1 143376 0x0
...
26 260 1 143576 0x0
27 270 1 143584 0x0
And after branch add, the tree looks like
Tree Depth: 1 Count: 19 Next Free Rec: 2
## Offset Clusters Block#
0 0 271 86183
1 271 0 143592
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Acked-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
[xfs, btrfs, capifs, shmem don't need BKL, exempt]
Signed-off-by: Alessio Igor Bogani <abogani@texware.it>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Move BKL into ->put_super from the only caller. A couple of
filesystems had trivial enough ->put_super (only kfree and NULLing of
s_fs_info + stuff in there) to not get any locking: coda, cramfs, efs,
hugetlbfs, omfs, qnx4, shmem, all others got the full treatment. Most
of them probably don't need it, but I'd rather sort that out individually.
Preferably after all the other BKL pushdowns in that area.
[AV: original used to move lock_super() down as well; these changes are
removed since we don't do lock_super() at all in generic_shutdown_super()
now]
[AV: fuse, btrfs and xfs are known to need no damn BKL, exempt]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
In ocfs2, fdatasync and fsync are identical.
I think fdatasync should skip committing transaction when
inode->i_state is set just I_DIRTY_SYNC and this indicates
only atime or/and mtime updates.
Following patch improves fdatasync throughput.
#sysbench --num-threads=16 --max-requests=300000 --test=fileio
--file-block-size=4K --file-total-size=16G --file-test-mode=rndwr
--file-fsync-mode=fdatasync run
Results:
-2.6.30-rc8
Test execution summary:
total time: 107.1445s
total number of events: 119559
total time taken by event execution: 116.1050
per-request statistics:
min: 0.0000s
avg: 0.0010s
max: 0.1220s
approx. 95 percentile: 0.0016s
Threads fairness:
events (avg/stddev): 7472.4375/303.60
execution time (avg/stddev): 7.2566/0.64
-2.6.30-rc8-patched
Test execution summary:
total time: 86.8529s
total number of events: 300016
total time taken by event execution: 24.3077
per-request statistics:
min: 0.0000s
avg: 0.0001s
max: 0.0336s
approx. 95 percentile: 0.0001s
Threads fairness:
events (avg/stddev): 18751.0000/718.75
execution time (avg/stddev): 1.5192/0.05
Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp>
Acked-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
It would be nice to know how often we get checksum failures. Even
better, how many of them we can fix with the single bit ecc. So, we add
a statistics structure. The structure can be installed into debugfs
wherever the user wants.
For ocfs2, we'll put it in the superblock-specific debugfs directory and
pass it down from our higher-level functions. The stats are only
registered with debugfs when the filesystem supports metadata ecc.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
