summaryrefslogtreecommitdiffstats
path: root/fs/reiserfs
AgeCommit message (Collapse)Author
2010-12-02reiserfs: don't acquire lock recursively in reiserfs_acl_chmodFrederic Weisbecker
reiserfs_acl_chmod() can be called by reiserfs_set_attr() and then take the reiserfs lock a second time. Thereafter it may call journal_begin() that definitely requires the lock not to be nested in order to release it before taking the journal mutex because the reiserfs lock depends on the journal mutex already. So, aviod nesting the lock in reiserfs_acl_chmod(). Reported-by: Pawel Zawora <pzawora@gmail.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Tested-by: Pawel Zawora <pzawora@gmail.com> Cc: Jeff Mahoney <jeffm@suse.com> Cc: <stable@kernel.org> [2.6.32.x+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-25reiserfs: fix inode mutex - reiserfs lock misorderingFrederic Weisbecker
reiserfs_unpack() locks the inode mutex with reiserfs_mutex_lock_safe() to protect against reiserfs lock dependency. However this protection requires to have the reiserfs lock to be locked. This is the case if reiserfs_unpack() is called by reiserfs_ioctl but not from reiserfs_quota_on() when it tries to unpack tails of quota files. Fix the ordering of the two locks in reiserfs_unpack() to fix this issue. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Reported-by: Markus Gapp <markus.gapp@gmx.net> Reported-by: Jan Kara <jack@suse.cz> Cc: Jeff Mahoney <jeffm@suse.com> Cc: <stable@kernel.org> [2.6.36.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-17BKL: remove extraneous #include <smp_lock.h>Arnd Bergmann
The big kernel lock has been removed from all these files at some point, leaving only the #include. Remove this too as a cleanup. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-29new helper: mount_bdev()Al Viro
... and switch of the obvious get_sb_bdev() users to ->mount() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (52 commits) split invalidate_inodes() fs: skip I_FREEING inodes in writeback_sb_inodes fs: fold invalidate_list into invalidate_inodes fs: do not drop inode_lock in dispose_list fs: inode split IO and LRU lists fs: switch bdev inode bdi's correctly fs: fix buffer invalidation in invalidate_list fsnotify: use dget_parent smbfs: use dget_parent exportfs: use dget_parent fs: use RCU read side protection in d_validate fs: clean up dentry lru modification fs: split __shrink_dcache_sb fs: improve DCACHE_REFERENCED usage fs: use percpu counter for nr_dentry and nr_dentry_unused fs: simplify __d_free fs: take dcache_lock inside __d_path fs: do not assign default i_ino in new_inode fs: introduce a per-cpu last_ino allocator new helper: ihold() ...
2010-10-26writeback: remove nonblocking/encountered_congestion referencesWu Fengguang
This removes more dead code that was somehow missed by commit 0d99519efef (writeback: remove unused nonblocking and congestion checks). There are no behavior change except for the removal of two entries from one of the ext4 tracing interface. The nonblocking checks in ->writepages are no longer used because the flusher now prefer to block on get_request_wait() than to skip inodes on IO congestion. The latter will lead to more seeky IO. The nonblocking checks in ->writepage are no longer used because it's redundant with the WB_SYNC_NONE check. We no long set ->nonblocking in VM page out and page migration, because a) it's effectively redundant with WB_SYNC_NONE in current code b) it's old semantic of "Don't get stuck on request queues" is mis-behavior: that would skip some dirty inodes on congestion and page out others, which is unfair in terms of LRU age. Inspired by Christoph Hellwig. Thanks! Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: David Howells <dhowells@redhat.com> Cc: Sage Weil <sage@newdream.net> Cc: Steve French <sfrench@samba.org> Cc: Chris Mason <chris.mason@oracle.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-25new helper: ihold()Al Viro
Clones an existing reference to inode; caller must already hold one. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-25new helper: inode_unhashed()Al Viro
note: for race-free uses you inode_lock held Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-25fs: kill block_prepare_writeChristoph Hellwig
__block_write_begin and block_prepare_write are identical except for slightly different calling conventions. Convert all callers to the __block_write_begin calling conventions and drop block_prepare_write. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-24Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) Update broken web addresses in arch directory. Update broken web addresses in the kernel. Revert "drivers/usb: Remove unnecessary return's from void functions" for musb gadget Revert "Fix typo: configuation => configuration" partially ida: document IDA_BITMAP_LONGS calculation ext2: fix a typo on comment in ext2/inode.c drivers/scsi: Remove unnecessary casts of private_data drivers/s390: Remove unnecessary casts of private_data net/sunrpc/rpc_pipe.c: Remove unnecessary casts of private_data drivers/infiniband: Remove unnecessary casts of private_data drivers/gpu/drm: Remove unnecessary casts of private_data kernel/pm_qos_params.c: Remove unnecessary casts of private_data fs/ecryptfs: Remove unnecessary casts of private_data fs/seq_file.c: Remove unnecessary casts of private_data arm: uengine.c: remove C99 comments arm: scoop.c: remove C99 comments Fix typo configue => configure in comments Fix typo: configuation => configuration Fix typo interrest[ing|ed] => interest[ing|ed] Fix various typos of valid in comments ... Fix up trivial conflicts in: drivers/char/ipmi/ipmi_si_intf.c drivers/usb/gadget/rndis.c net/irda/irnet/irnet_ppp.c
2010-10-19Merge branch 'v2.6.36-rc8' into for-2.6.37/barrierJens Axboe
Conflicts: block/blk-core.c drivers/block/loop.c mm/swapfile.c Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-18Update broken web addresses in the kernel.Justin P. Mattock
The patch below updates broken web addresses in the kernel Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Finn Thain <fthain@telegraphics.com.au> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Matt Turner <mattst88@gmail.com> Cc: Dimitry Torokhov <dmitry.torokhov@gmail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Acked-by: Ben Pfaff <blp@cs.stanford.edu> Acked-by: Hans J. Koch <hjk@linutronix.de> Reviewed-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-01reiserfs: fix unwanted reiserfs lock recursionFrederic Weisbecker
Prevent from recursively locking the reiserfs lock in reiserfs_unpack() because we may call journal_begin() that requires the lock to be taken only once, otherwise it won't be able to release the lock while taking other mutexes, ending up in inverted dependencies between the journal mutex and the reiserfs lock for example. This fixes: ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.35.4.4a #3 ------------------------------------------------------- lilo/1620 is trying to acquire lock: (&journal->j_mutex){+.+...}, at: [<d0325bff>] do_journal_begin_r+0x7f/0x340 [reiserfs] but task is already holding lock: (&REISERFS_SB(s)->lock){+.+.+.}, at: [<d032a278>] reiserfs_write_lock+0x28/0x40 [reiserfs] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&REISERFS_SB(s)->lock){+.+.+.}: [<c10562b7>] lock_acquire+0x67/0x80 [<c12facad>] __mutex_lock_common+0x4d/0x410 [<c12fb0c8>] mutex_lock_nested+0x18/0x20 [<d032a278>] reiserfs_write_lock+0x28/0x40 [reiserfs] [<d0325c06>] do_journal_begin_r+0x86/0x340 [reiserfs] [<d0325f77>] journal_begin+0x77/0x140 [reiserfs] [<d0315be4>] reiserfs_remount+0x224/0x530 [reiserfs] [<c10b6a20>] do_remount_sb+0x60/0x110 [<c10cee25>] do_mount+0x625/0x790 [<c10cf014>] sys_mount+0x84/0xb0 [<c12fca3d>] syscall_call+0x7/0xb -> #0 (&journal->j_mutex){+.+...}: [<c10560f6>] __lock_acquire+0x1026/0x1180 [<c10562b7>] lock_acquire+0x67/0x80 [<c12facad>] __mutex_lock_common+0x4d/0x410 [<c12fb0c8>] mutex_lock_nested+0x18/0x20 [<d0325bff>] do_journal_begin_r+0x7f/0x340 [reiserfs] [<d0325f77>] journal_begin+0x77/0x140 [reiserfs] [<d0326271>] reiserfs_persistent_transaction+0x41/0x90 [reiserfs] [<d030d06c>] reiserfs_get_block+0x22c/0x1530 [reiserfs] [<c10db9db>] __block_prepare_write+0x1bb/0x3a0 [<c10dbbe6>] block_prepare_write+0x26/0x40 [<d030b738>] reiserfs_prepare_write+0x88/0x170 [reiserfs] [<d03294d6>] reiserfs_unpack+0xe6/0x120 [reiserfs] [<d0329782>] reiserfs_ioctl+0x272/0x320 [reiserfs] [<c10c3188>] vfs_ioctl+0x28/0xa0 [<c10c3bbd>] do_vfs_ioctl+0x32d/0x5c0 [<c10c3eb3>] sys_ioctl+0x63/0x70 [<c12fca3d>] syscall_call+0x7/0xb other info that might help us debug this: 2 locks held by lilo/1620: #0: (&sb->s_type->i_mutex_key#8){+.+.+.}, at: [<d032945a>] reiserfs_unpack+0x6a/0x120 [reiserfs] #1: (&REISERFS_SB(s)->lock){+.+.+.}, at: [<d032a278>] reiserfs_write_lock+0x28/0x40 [reiserfs] stack backtrace: Pid: 1620, comm: lilo Not tainted 2.6.35.4.4a #3 Call Trace: [<c10560f6>] __lock_acquire+0x1026/0x1180 [<c10562b7>] lock_acquire+0x67/0x80 [<c12facad>] __mutex_lock_common+0x4d/0x410 [<c12fb0c8>] mutex_lock_nested+0x18/0x20 [<d0325bff>] do_journal_begin_r+0x7f/0x340 [reiserfs] [<d0325f77>] journal_begin+0x77/0x140 [reiserfs] [<d0326271>] reiserfs_persistent_transaction+0x41/0x90 [reiserfs] [<d030d06c>] reiserfs_get_block+0x22c/0x1530 [reiserfs] [<c10db9db>] __block_prepare_write+0x1bb/0x3a0 [<c10dbbe6>] block_prepare_write+0x26/0x40 [<d030b738>] reiserfs_prepare_write+0x88/0x170 [reiserfs] [<d03294d6>] reiserfs_unpack+0xe6/0x120 [reiserfs] [<d0329782>] reiserfs_ioctl+0x272/0x320 [reiserfs] [<c10c3188>] vfs_ioctl+0x28/0xa0 [<c10c3bbd>] do_vfs_ioctl+0x32d/0x5c0 [<c10c3eb3>] sys_ioctl+0x63/0x70 [<c12fca3d>] syscall_call+0x7/0xb Reported-by: Jarek Poplawski <jarkao2@gmail.com> Tested-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jeff Mahoney <jeffm@suse.com> Cc: All since 2.6.32 <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-01reiserfs: fix dependency inversion between inode and reiserfs mutexesFrederic Weisbecker
The reiserfs mutex already depends on the inode mutex, so we can't lock the inode mutex in reiserfs_unpack() without using the safe locking API, because reiserfs_unpack() is always called with the reiserfs mutex locked. This fixes: ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.35c #13 ------------------------------------------------------- lilo/1606 is trying to acquire lock: (&sb->s_type->i_mutex_key#8){+.+.+.}, at: [<d0329450>] reiserfs_unpack+0x60/0x110 [reiserfs] but task is already holding lock: (&REISERFS_SB(s)->lock){+.+.+.}, at: [<d032a268>] reiserfs_write_lock+0x28/0x40 [reiserfs] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&REISERFS_SB(s)->lock){+.+.+.}: [<c1056347>] lock_acquire+0x67/0x80 [<c12f083d>] __mutex_lock_common+0x4d/0x410 [<c12f0c58>] mutex_lock_nested+0x18/0x20 [<d032a268>] reiserfs_write_lock+0x28/0x40 [reiserfs] [<d0329e9a>] reiserfs_lookup_privroot+0x2a/0x90 [reiserfs] [<d0316b81>] reiserfs_fill_super+0x941/0xe60 [reiserfs] [<c10b7d17>] get_sb_bdev+0x117/0x170 [<d0313e21>] get_super_block+0x21/0x30 [reiserfs] [<c10b74ba>] vfs_kern_mount+0x6a/0x1b0 [<c10b7659>] do_kern_mount+0x39/0xe0 [<c10cebe0>] do_mount+0x340/0x790 [<c10cf0b4>] sys_mount+0x84/0xb0 [<c12f25cd>] syscall_call+0x7/0xb -> #0 (&sb->s_type->i_mutex_key#8){+.+.+.}: [<c1056186>] __lock_acquire+0x1026/0x1180 [<c1056347>] lock_acquire+0x67/0x80 [<c12f083d>] __mutex_lock_common+0x4d/0x410 [<c12f0c58>] mutex_lock_nested+0x18/0x20 [<d0329450>] reiserfs_unpack+0x60/0x110 [reiserfs] [<d0329772>] reiserfs_ioctl+0x272/0x320 [reiserfs] [<c10c3228>] vfs_ioctl+0x28/0xa0 [<c10c3c5d>] do_vfs_ioctl+0x32d/0x5c0 [<c10c3f53>] sys_ioctl+0x63/0x70 [<c12f25cd>] syscall_call+0x7/0xb other info that might help us debug this: 1 lock held by lilo/1606: #0: (&REISERFS_SB(s)->lock){+.+.+.}, at: [<d032a268>] reiserfs_write_lock+0x28/0x40 [reiserfs] stack backtrace: Pid: 1606, comm: lilo Not tainted 2.6.35c #13 Call Trace: [<c1056186>] __lock_acquire+0x1026/0x1180 [<c1056347>] lock_acquire+0x67/0x80 [<c12f083d>] __mutex_lock_common+0x4d/0x410 [<c12f0c58>] mutex_lock_nested+0x18/0x20 [<d0329450>] reiserfs_unpack+0x60/0x110 [reiserfs] [<d0329772>] reiserfs_ioctl+0x272/0x320 [reiserfs] [<c10c3228>] vfs_ioctl+0x28/0xa0 [<c10c3c5d>] do_vfs_ioctl+0x32d/0x5c0 [<c10c3f53>] sys_ioctl+0x63/0x70 [<c12f25cd>] syscall_call+0x7/0xb Reported-by: Jarek Poplawski <jarkao2@gmail.com> Tested-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jeff Mahoney <jeffm@suse.com> Cc: <stable@kernel.org> [2.6.32 and later] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-16block: remove BLKDEV_IFL_WAITChristoph Hellwig
All the blkdev_issue_* helpers can only sanely be used for synchronous caller. To issue cache flushes or barriers asynchronously the caller needs to set up a bio by itself with a completion callback to move the asynchronous state machine ahead. So drop the BLKDEV_IFL_WAIT flag that is always specified when calling blkdev_issue_* and also remove the now unused flags argument to blkdev_issue_flush and blkdev_issue_zeroout. For blkdev_issue_discard we need to keep it for the secure discard flag, which gains a more descriptive name and loses the bitops vs flag confusion. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-10reiserfs: replace barriers with explicit flush / FUA usageChristoph Hellwig
Switch to the WRITE_FLUSH_FUA flag for log writes and remove the EOPNOTSUPP detection for barriers. Note that reiserfs had a fairly different code path for barriers before as it wa the only filesystem actually making use of them. The new code always uses the old non-barrier codepath and just sets the WRITE_FLUSH_FUA explicitly for the journal commits. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Jan Kara <jack@suse.cz> Acked-by: Chris Mason <chris.mason@oracle.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-18remove SWRITE* I/O typesChristoph Hellwig
These flags aren't real I/O types, but tell ll_rw_block to always lock the buffer instead of giving up on a failed trylock. Instead add a new write_dirty_buffer helper that implements this semantic and use it from the existing SWRITE* callers. Note that the ll_rw_block code had a bug where it didn't promote WRITE_SYNC_PLUG properly, which this patch fixes. In the ufs code clean up the helper that used to call ll_rw_block to mirror sync_dirty_buffer, which is the function it implements for compound buffers. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-18fix reiserfs_evict_inode end_writeback second callSergey Senozhatsky
reiserfs_evict_inode calls end_writeback two times hitting kernel BUG at fs/inode.c:298 becase inode->i_state is I_CLEAR already. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-11reiserfs: remove unused local `wait'Changli Gao
Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (96 commits) no need for list_for_each_entry_safe()/resetting with superblock list Fix sget() race with failing mount vfs: don't hold s_umount over close_bdev_exclusive() call sysv: do not mark superblock dirty on remount sysv: do not mark superblock dirty on mount btrfs: remove junk sb_dirt change BFS: clean up the superblock usage AFFS: wait for sb synchronization when needed AFFS: clean up dirty flag usage cifs: truncate fallout mbcache: fix shrinker function return value mbcache: Remove unused features add f_flags to struct statfs(64) pass a struct path to vfs_statfs update VFS documentation for method changes. All filesystems that need invalidate_inode_buffers() are doing that explicitly convert remaining ->clear_inode() to ->evict_inode() Make ->drop_inode() just return whether inode needs to be dropped fs/inode.c:clear_inode() is gone fs/inode.c:evict() doesn't care about delete vs. non-delete paths now ... Fix up trivial conflicts in fs/nilfs2/super.c
2010-08-09convert reiserfs to ->evict_inode()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-09always call inode_change_ok early in ->setattrChristoph Hellwig
Make sure we call inode_change_ok before doing any changes in ->setattr, and make sure to call it even if our fs wants to ignore normal UNIX permissions, but use the ATTR_FORCE to skip those. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-09remove inode_setattrChristoph Hellwig
Replace inode_setattr with opencoded variants of it in all callers. This moves the remaining call to vmtruncate into the filesystem methods where it can be replaced with the proper truncate sequence. In a few cases it was obvious that we would never end up calling vmtruncate so it was left out in the opencoded variant: spufs: explicitly checks for ATTR_SIZE earlier btrfs,hugetlbfs,logfs,dlmfs: explicitly clears ATTR_SIZE earlier ufs: contains an opencoded simple_seattr + truncate that sets the filesize just above In addition to that ncpfs called inode_setattr with handcrafted iattrs, which allowed to trim down the opencoded variant. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-09introduce __block_write_beginChristoph Hellwig
Split up the block_write_begin implementation - __block_write_begin is a new trivial wrapper for block_prepare_write that always takes an already allocated page and can be either called from block_write_begin or filesystem code that already has a page allocated. Remove the handling of already allocated pages from block_write_begin after switching all callers that do it to __block_write_begin. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-09sort out blockdev_direct_IO variantsChristoph Hellwig
Move the call to vmtruncate to get rid of accessive blocks to the callers in prepearation of the new truncate calling sequence. This was only done for DIO_LOCKING filesystems, so the __blockdev_direct_IO_newtrunc variant was not needed anyway. Get rid of blockdev_direct_IO_no_locking and its _newtrunc variant while at it as just opencoding the two additional paramters is shorted than the name suffix. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-09Fix reiserfs_file_release()Al Viro
a) count file openers correctly; i_count use was completely wrong b) use new mutex for exclusion between final close/open/truncate, to protect tailpacking logics. i_mutex use was wrong and resulted in deadlocks. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-06-16Merge branch 'master' into for-nextJiri Kosina
2010-06-16fix typos concerning "initiali[zs]e"Uwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-30Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: quota: Convert quota statistics to generic percpu_counter ext3 uses rb_node = NULL; to zero rb_root. quota: Fixup dquot_transfer reiserfs: Fix resuming of quotas on remount read-write pohmelfs: Remove dead quota code ufs: Remove dead quota code udf: Remove dead quota code quota: rename default quotactl methods to dquot_ quota: explicitly set ->dq_op and ->s_qcop quota: drop remount argument to ->quota_on and ->quota_off quota: move unmount handling into the filesystem quota: kill the vfs_dq_off and vfs_dq_quota_on_remount wrappers quota: move remount handling into the filesystem ocfs2: Fix use after free on remount read-only Fix up conflicts in fs/ext4/super.c and fs/ufs/file.c
2010-05-27drop unused dentry argument to ->fsyncChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-27fs/: do not fallback to default_llseek() when readdir() uses BKLjan Blunck
Do not use the fallback default_llseek() if the readdir operation of the filesystem still uses the big kernel lock. Since llseek() modifies file->f_pos of the directory directly it may need locking to not confuse readdir which usually uses file->f_pos directly as well Since the special characteristics of the BKL (unlocked on schedule) are not necessary in this case, the inode mutex can be used for locking as provided by generic_file_llseek(). This is only possible since all filesystems, except reiserfs, either use a directory as a flat file or with disk address offsets. Reiserfs on the other hand uses a 32bit hash off the filename as the offset so generic_file_llseek() can get used as well since the hash is always smaller than sb->s_maxbytes (= (512 << 32) - blocksize). Signed-off-by: Jan Blunck <jblunck@suse.de> Acked-by: Jan Kara <jack@suse.cz> Acked-by: Anders Larsen <al@alarsen.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27reiserfs: Fix resuming of quotas on remount read-writeJan Kara
When quota was suspended on remount-ro, finish_unfinished() will try to turn it on again (which fails) and also turns the quotas off on exit. Fix the function to check whether quotas are already on at function entry and do not turn them off in that case. CC: reiserfs-devel@vger.kernel.org Signed-off-by: Jan Kara <jack@suse.cz>
2010-05-24quota: rename default quotactl methods to dquot_Christoph Hellwig
Follow the dquot_* style used elsewhere in dquot.c. [Jan Kara: Fixed up missing conversion of ext2] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2010-05-24quota: drop remount argument to ->quota_on and ->quota_offChristoph Hellwig
Remount handling has fully moved into the filesystem, so all this is superflous now. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2010-05-24quota: move unmount handling into the filesystemChristoph Hellwig
Currently the VFS calls into the quotactl interface for unmounting filesystems. This means filesystems with their own quota handling can't easily distinguish between user-space originating quotaoff and an unount. Instead move the responsibily of the unmount handling into the filesystem to be consistent with all other dquot handling. Note that we do call dquot_disable a lot later now, e.g. after a sync_filesystem. But this is fine as the quota code does all its writes via blockdev's mapping and that is synced even later. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2010-05-24quota: kill the vfs_dq_off and vfs_dq_quota_on_remount wrappersChristoph Hellwig
Instead of having wrappers in the VFS namespace export the dquot_suspend and dquot_resume helpers directly. Also rename vfs_quota_disable to dquot_disable while we're at it. [Jan Kara: Moved dquot_suspend to quotaops.h and made it inline] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2010-05-24quota: move remount handling into the filesystemChristoph Hellwig
Currently do_remount_sb calls into the dquot code to tell it about going from rw to ro and ro to rw. Move this code into the filesystem to not depend on the dquot code in the VFS - note ocfs2 already ignores these calls and handles remount by itself. This gets rid of overloading the quotactl calls and allows to unify the VFS and XFS codepaths in that area later. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2010-05-21Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (69 commits) fix handling of offsets in cris eeprom.c, get rid of fake on-stack files get rid of home-grown mutex in cris eeprom.c switch ecryptfs_write() to struct inode *, kill on-stack fake files switch ecryptfs_get_locked_page() to struct inode * simplify access to ecryptfs inodes in ->readpage() and friends AFS: Don't put struct file on the stack Ban ecryptfs over ecryptfs logfs: replace inode uid,gid,mode initialization with helper function ufs: replace inode uid,gid,mode initialization with helper function udf: replace inode uid,gid,mode init with helper ubifs: replace inode uid,gid,mode initialization with helper function sysv: replace inode uid,gid,mode initialization with helper function reiserfs: replace inode uid,gid,mode initialization with helper function ramfs: replace inode uid,gid,mode initialization with helper function omfs: replace inode uid,gid,mode initialization with helper function bfs: replace inode uid,gid,mode initialization with helper function ocfs2: replace inode uid,gid,mode initialization with helper function nilfs2: replace inode uid,gid,mode initialization with helper function minix: replace inode uid,gid,mode init with helper ext4: replace inode uid,gid,mode init with helper ... Trivial conflict in fs/fs-writeback.c (mark bitfields unsigned)
2010-05-21reiserfs: replace inode uid,gid,mode initialization with helper functionDmitry Monakhov
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-21reiserfs: constify xattr_handlerStephen Hemminger
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-21Merge branch 'master' into for-2.6.35Jens Axboe
Conflicts: fs/ext3/fsync.c Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-05-21quota: unify quota init condition in setattrDmitry Monakhov
Quota must being initialized if size or uid/git changes requested. But initialization performed in two different places: in case of i_size file system is responsible for dquot init , but in case of uid/gid init will be called internally in dquot_transfer(). This ambiguity makes code harder to understand. Let's move this logic to one common helper function. Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Jan Kara <jack@suse.cz>
2010-04-29Merge branch 'master' into for-2.6.35Jens Axboe
Conflicts: fs/block_dev.c Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-28blkdev: generalize flags for blkdev_issue_fn functionsDmitry Monakhov
The patch just convert all blkdev_issue_xxx function to common set of flags. Wait/allocation semantics preserved. Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-24reiserfs: fix corruption during shrinking of xattrsJeff Mahoney
Commit 48b32a3553a54740d236b79a90f20147a25875e3 ("reiserfs: use generic xattr handlers") introduced a problem that causes corruption when extended attributes are replaced with a smaller value. The issue is that the reiserfs_setattr to shrink the xattr file was moved from before the write to after the write. The root issue has always been in the reiserfs xattr code, but was papered over by the fact that in the shrink case, the file would just be expanded again while the xattr was written. The end result is that the last 8 bytes of xattr data are lost. This patch fixes it to use new_size. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=14826 Signed-off-by: Jeff Mahoney <jeffm@suse.com> Reported-by: Christian Kujau <lists@nerdbynature.de> Tested-by: Christian Kujau <lists@nerdbynature.de> Cc: Edward Shishkin <edward.shishkin@gmail.com> Cc: Jethro Beekman <kernel@jbeekman.nl> Cc: Greg Surbey <gregsurbey@hotmail.com> Cc: Marco Gatti <marco.gatti@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-24reiserfs: fix permissions on .reiserfs_privJeff Mahoney
Commit 677c9b2e393a0cd203bd54e9c18b012b2c73305a ("reiserfs: remove privroot hiding in lookup") removed the magic from the lookup code to hide the .reiserfs_priv directory since it was getting loaded at mount-time instead. The intent was that the entry would be hidden from the user via a poisoned d_compare, but this was faulty. This introduced a security issue where unprivileged users could access and modify extended attributes or ACLs belonging to other users, including root. This patch resolves the issue by properly hiding .reiserfs_priv. This was the intent of the xattr poisoning code, but it appears to have never worked as expected. This is fixed by using d_revalidate instead of d_compare. This patch makes -oexpose_privroot a no-op. I'm fine leaving it this way. The effort involved in working out the corner cases wrt permissions and caching outweigh the benefit of the feature. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Acked-by: Edward Shishkin <edward.shishkin@gmail.com> Reported-by: Matt McCutchen <matt@mattmccutchen.net> Tested-by: Matt McCutchen <matt@mattmccutchen.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-05Merge branch 'master' into export-slabhTejun Heo
2010-03-30reiserfs: Fix locking BUG during mount failureJeff Mahoney
Commit 8ebc423238341b52912c7295b045a32477b33f09 (reiserfs: kill-the-BKL) introduced a bug in the mount failure case. The error label releases the lock before calling journal_release_error, but it requires that the lock be held. do_journal_release unlocks and retakes it. When it releases it without it held, we trigger a BUG(). The error_alloc label skips the unlock since the lock isn't held yet but none of the other conditions that are clean up exist yet either. This patch returns immediately after the kzalloc failure and moves the reiserfs_write_unlock after the journal_release_error call. This was reported in https://bugzilla.novell.com/show_bug.cgi?id=591807 Reported-by: Thomas Siedentopf <thomas.siedentopf@novell.com> Signed-off-by: Jeff Mahoney <jeffm@suse.com> Cc: Thomas Siedentopf <thomas.siedentopf@novell.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: 2.6.33.x <stable@kernel.org> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24reiserfs: properly honor read-only devicesJeff Mahoney
The reiserfs journal behaves inconsistently when determining whether to allow a mount of a read-only device. This is due to the use of the continue_replay variable to short circuit the journal scanning. If it's set, it's assumed that there are transactions to replay, but there may not be. If it's unset, it's assumed that there aren't any, and that may not be the case either. I've observed two failure cases: 1) Where a clean file system on a read-only device refuses to mount 2) Where a clean file system on a read-only device passes the optimization and then tries writing the journal header to update the latest mount id. The former is easily observable by using a freshly created file system on a read-only loopback device. This patch moves the check into journal_read_transaction, where it can bail out before it's about to replay a transaction. That way it can go through and skip transactions where appropriate, yet still refuse to mount a file system with outstanding transactions. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>