| Age | Commit message (Collapse) | Author |
|---|
|
create_proc_read_entry() is getting deprecated.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
This patch rips out the XFS ACL handling code and uses the generic
fs/posix_acl.c code instead. The ondisk format is of course left
unchanged.
This also introduces the same ACL caching all other Linux filesystems do
by adding pointers to the acl and default acl in struct xfs_inode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
|
|
SYNC_BDFLUSH is a leftover from IRIX and rather misnamed for todays
code. Make xfs_sync_fsdata and xfs_dq_sync use the SYNC_TRYLOCK flag
for not blocking on logs just as the inode sync code already does.
For xfs_sync_fsdata it's a trivial 1:1 replacement, but for xfs_qm_sync
I use the opportunity to decouple the non-blocking lock case from the
different flushing modes, similar to the inode sync code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
|
|
Use xfs_inode_ag_iterator instead of opencoding the inode walk in the
quota code. Mark xfs_inode_ag_iterator and xfs_sync_inode_valid non-static
to allow using them from the quota code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
|
|
Kill the quota ops function vector and replace it with direct calls or
stubs in the CONFIG_XFS_QUOTA=n case.
Make sure we check XFS_IS_QUOTA_RUNNING in the right spots. We can remove
the number of those checks because the XFS_TRANS_DQ_DIRTY flag can't be set
otherwise.
This brings us back closer to the way this code worked in IRIX and earlier
Linux versions, but we keep a lot of the more useful factoring of common
code.
Eventually we should also kill xfs_qm_bhv.c, but that's left for a later
patch.
Reduces the size of the source code by about 250 lines and the size of
XFS module by about 1.5 kilobytes with quotas enabled:
text data bss dec hex filename
615957 2960 3848 622765 980ad fs/xfs/xfs.o
617231 3152 3848 624231 98667 fs/xfs/xfs.o.old
Fallout:
- xfs_qm_dqattach is split into xfs_qm_dqattach_locked which expects
the inode locked and xfs_qm_dqattach which does the locking around it,
thus removing XFS_QMOPT_ILOCKED.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
|
|
People continue to complain about this for weird reasons, but there's
really no point in keeping this typedef for a couple of users anyway.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
|
|
Currently we call from the nicely abstracted linux quotaops into a ugly
multiplexer just to split the calls out at the same boundary again.
Rewrite the quota ops handling to remove that obfucation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
|
|
Get rid of various obsfucating wrappers for accessing the quota hash lock,
we only keep the accessors for accessing the mplist and freelist locks as
they encode a multi-level datastructure walk. But make sure all of them
are defined in the same way as simple macros.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
|
|
Now that we have a helper to test if a mutex is held use it instead of our
own little hacks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
|
|
Remove these macros which only obsfucated the code in rather nast ways.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
|
|
The XFS_QMOPT_DQLOCK flag introduces major complexity in the quota subsystem
but isn't actually used anywhere. So remove it and all the hazzles it
introduces.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
|
|
We can have both a user and a group/project dquot locked at the same time,
as long as the user dquot is locked first. Tell lockdep about that fact
by making the group/project dquots a different lock class.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
|
|
xfs_dqlock2 locks two xfs_dquots, which is fine as it always locks the
dquot with the lower id first. Use mutex_lock_nested to tell lockdep
about this fact.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
|
|
We can have both a a quota hash chain and the per-mount list locked at
the same time. But given that both use the same struct dqhash as list
head we have to tell lockdep that they are different lock classes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
|
|
Remove the last of the macros-defined-to-static-functions.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
|
Currently we explicitly call xfs_iflush on the quota, real-time and root
inodes from xfs_unmount_flush. But we just called xfs_sync_inodes with
SYNC_ATTR and do an XFS_bflush aka xfs_flush_buftarg to make sure all inodes
are on disk already, so there is no need for these special cases.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
|
|
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
|
|
The radix tree walks in xfs_sync_inodes_ag and xfs_qm_dqrele_all_inodes()
can find inodes that are still undergoing initialisation. Avoid
them by checking for the the XFS_INEW() flag once we have a reference
on the inode. This flag is cleared once the inode is properly initialised.
SGI-PV: 987246
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
|
gcc on ARM warns about an using an uninitialised variable
in xfs_qm_dqrele_all_inodes(). This is a real bug, but gcc
on x86_64 is not reporting this warning so it went unnoticed.
Fix the bug by bring the inode radix tree walk code up to
date with xfs_sync_inodes_ag().
SGI-PV: 987246
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
|
No need to parse the mount option into a structure before applying it to
struct xfs_mount.
The content of xfs_start_flags gets merged into xfs_parseargs. Calls
inbetween don't care and can use mount members instead of the args struct.
This patch uncovered that the mount option for shared filesystems wasn't
ever exposed on Linux. The code to handle it is #if 0'ed in this patch
pending a decision on this feature. I'll send a writeup about it to the
list soon.
SGI-PV: 987246
SGI-Modid: xfs-linux-melb:xfs-kern:32371a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
|
Change all the remaining AIL API functions that are passed struct
xfs_mount pointers to pass pointers directly to the struct xfs_ail being
used. With this conversion, all external access to the AIL is via the
struct xfs_ail. Hence the operation and referencing of the AIL is almost
entirely independent of the xfs_mount that is using it - it is now much
more tightly tied to the log and the items it is tracking in the log than
it is tied to the xfs_mount.
SGI-PV: 988143
SGI-Modid: xfs-linux-melb:xfs-kern:32353a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
|
|
Bring the ail lock inside the struct xfs_ail. This means the AIL can be
entirely manipulated via the struct xfs_ail rather than needing both the
struct xfs_mount and the struct xfs_ail.
SGI-PV: 988143
SGI-Modid: xfs-linux-melb:xfs-kern:32350a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
|
|
When copying lsn's from the log item to the inode or dquot flush lsn, we
currently grab the AIL lock. We do this because the LSN is a 64 bit
quantity and it needs to be read atomically. The lock is used to guarantee
atomicity for 32 bit platforms.
Make the LSN copying a small function, and make the function used
conditional on BITS_PER_LONG so that 64 bit machines don't need to take
the AIL lock in these places.
SGI-PV: 988143
SGI-Modid: xfs-linux-melb:xfs-kern:32349a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
|
|
There are no more callers to xfs_sync() now, so remove the function
altogther.
SGI-PV: 988140
SGI-Modid: xfs-linux-melb:xfs-kern:32311a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
|
|
Kill the unused arg in xfs_syncsub() and xfs_sync_inodes(). For callers of
xfs_syncsub() that only want to flush inodes, replace xfs_syncsub() with
direct calls to xfs_sync_inodes() as that is all that is being done with
the specific flags being passed in.
SGI-PV: 988140
SGI-Modid: xfs-linux-melb:xfs-kern:32305a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
|
|
With the sync code relocated to the linux-2.6 directory we can use struct
inodes directly. If we do the same thing for the quota release code, we
can remove vn_grab altogether. While here, convert the VN_BAD() checks to
is_bad_inode() so we can remove vnodes entirely from this code.
SGI-PV: 988140
SGI-Modid: xfs-linux-melb:xfs-kern:32304a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
|
|
Make releasing all inode dquots traverse the per-ag inode radix trees
rather than the mount inode list. This removes another user of the mount
inode list.
Version 3 o fix comment relating to avoiding trying to release the
quota inodes and those in reclaim.
Version 2 o add comment explaining use of gang lookups for a single inode
o use IRELE, not VN_RELE o move check for ag initialisation to caller.
SGI-PV: 988139
SGI-Modid: xfs-linux-melb:xfs-kern:32291a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
|
|
Normally dquots are written back via delayed write mechanisms. They are
flushed to their backing buffer by xfssyncd, which is then pushed out by
either AIL or xfsbufd flushing. The flush from the xfssyncd is supposed to
be non-blocking, but xfs_qm_dqflush() always waits for pinned duots, which
means that it will block for the length of time it takes to do a
synchronous log force. This causes unnecessary extra log I/O to be issued
whenever we try to flush a busy dquot.
Avoid the log forces and blocking xfssyncd by making xfs_qm_dqflush() pay
attention to what type of sync it is doing when it sees a pinned dquot and
not waiting when doing non-blocking flushes.
SGI-PV: 988147
SGI-Modid: xfs-linux-melb:xfs-kern:32287a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Peter Leckie <pleckie@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
|
This is a fix for patch " Clean up dquot pincount code" which introduced a
build breakage due to a missing & in xfs_qm_dquot_logitem_pin.
SGI-PV: 986789
SGI-Modid: xfs-linux-melb:xfs-kern:32221a
Signed-off-by: Peter Leckie <pleckie@sgi.com>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
|
This is a code cleanup and optimization that removes a per mount point
spinlock from the quota code and cleans up the code.
The patch changes the pincount from being an int protected by a spinlock
to an atomic_t allowing the pincount to be manipulated without holding the
spinlock.
This cleanup also protects against random wakup's of both the aild and
xfssyncd by reevaluating the pincount after been woken. Two latter patches
will address the Spurious wakeups.
SGI-PV: 986789
SGI-Modid: xfs-linux-melb:xfs-kern:32215a
Signed-off-by: Peter Leckie <pleckie@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
|
Use KM_NOFS to prevent recursion back into the filesystem which can cause
deadlocks.
In the case of xfs_iread() we hold the lock on the inode cluster buffer
while allocating memory for the trace buffers. If we recurse back into XFS
to flush data that may require a transaction to allocate extents which
needs log space. This can deadlock with the xfsaild thread which can't
push the tail of the log because it is trying to get the inode cluster
buffer lock.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31838a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
|
|
Remove all the useless flags and code keyed off it in xfs_mountfs.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31831a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
|
Use the new completion flush code to implement the dquot flush lock.
Removes one of the final users of semaphores in the XFS code base.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31822a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
|
All remaining bhv_vnode_t instance are in code that's more or less Linux
specific. (Well, for xfs_acl.c that could be argued, but that code is on
the removal list, too). So just do an s/bhv_vnode_t/struct inode/ over the
whole tree. We can clean up variable naming and some useless helpers
later.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31781a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
|
Use IHOLD(ip) instead of VN_HOLD(VFS_I(ip)).
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31765a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
|
Replace XFS_ITOV() with the new VFS_I() inline.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31724a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
|
Replace XFS_ITOV_NULL() with the new VFS_I() inline.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31722a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
|
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31405a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
|
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31056a
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
|
kmem_free() function takes (ptr, size) arguments but doesn't actually use
second one.
This patch removes size argument from all callsites.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31050a
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
|
The writer field is not needed for non_DEBU builds so remove it. While
we're at i also clean up the interface for is locked asserts to go through
and xfs_iget.c helper with an interface like the xfs_ilock routines to
isolated the XFS codebase from mrlock internals. That way we can kill
mrlock_t entirely once rw_semaphores grow an islocked facility. Also
remove unused flags to the ilock family of functions.
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30902a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
|
Unless XFS_IGET_CREATE is passed xfs_iget will return ENOENT if it
encounters an inode with di_mode == 0. Remove the duplicated checks in the
callers.
(the log recovery case is not touched for now)
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30898a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
|
xfs_bawrite() can return immediate error status on async writes. Unlike
xfsbdstrat() we don't ever check the error on the buffer after the call,
so we currently do not catch errors at all here. Ensure we catch and
propagate or warn to the syslog about up-front async write errors.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30824a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
|
xfs_trans_commit() can return errors when there are problems in the
transaction subsystem. They are indicative that the entire transaction may
be incomplete, and hence the error should be propagated as there is a good
possibility that there is something fatally wrong in the filesystem. Catch
and propagate or warn about commit errors in the places where they are
currently ignored.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30795a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
|
Truncating the quota files can silently fail. Ensure that truncation
errors are propagated to the callers.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30791a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
|
When turning off quota, we need to write various transactions to the log
to ensure that they are cleanly removed in the case of a crash. We need to
check that the transactions hit the disk correctly. If we fail to write
the final quota off transaction, we are corrupt in memory and so the only
option is to shut the filesystem down at this point.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30790a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
|
Warn to the syslog if we fail to reset the quota flags in the superblock
when a quota check fails.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30789a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
|
xfs_qm_mount_quotas() returns an error status that is ignored. If we fail
to mount quotas, we continue with quota's turned off, which is all handled
inside xfs_qm_mount_quotas(). Mark it as void to indicate that errors need
not be returned to the callers.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30788a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
|
xfs_qm_dqflush() can fail, but the return is not checked anywhere. Hence
we never know if we've failed to flush a dquot to disk. Propagate the
error and warn to the syslog if a flush ever fails.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30787a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
|
xfs_qm_dqflush_all() can return flush errors. Ensure they are propagated
into the quotacheck code to determine if the quotacheck succeeded or not.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30786a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
