| Age | Commit message (Collapse) | Author |
|---|
|
Fixes generated by 'codespell' and manually reviewed.
Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
|
|
Preallocation and hole punch transactions are currently synchronous
and this is causing performance problems in some cases. The
transactions don't need to be synchronous as we don't need to
guarantee the preallocation is persistent on disk until a
fdatasync, fsync, sync operation occurs. If the file is opened
O_SYNC or O_DATASYNC, only then should the transaction be issued
synchronously.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
|
|
Once converted, kill the remainder of the cmn_err() interface.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Continue to clean up the error logging code by converting all the
callers of xfs_fs_cmn_err() to the new API. Once done, remove the
unused old API function.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Currently we return iodes from xfs_ialloc with just a single reference held.
But we need two references, as one is dropped during transaction commit and
the second needs to be transfered to the VFS. Change xfs_ialloc to use
xfs_iget plus xfs_trans_ijoin_ref to grab two references to the inode,
and remove the now superflous IHOLD calls from all callers. This also
greatly simplifies the error handling in xfs_create and also allow to remove
xfs_trans_iget as no other callers are left.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
A long standing problem for streaming writeѕ through the NFS server
has been that the NFS server opens and closes file descriptors on an
inode for every write. The result of this behaviour is that the
->release() function is called on every close and that results in
XFS truncating speculative preallocation beyond the EOF. This has
an adverse effect on file layout when multiple files are being
written at the same time - they interleave their extents and can
result in severe fragmentation.
To avoid this problem, keep track of ->release calls made on a dirty
inode. For most cases, an inode is only going to be opened once for
writing and then closed again during it's lifetime in cache. Hence
if there are multiple ->release calls when the inode is dirty, there
is a good chance that the inode is being accessed by the NFS server.
Hence set a flag the first time ->release is called while there are
delalloc blocks still outstanding on the inode.
If this flag is set when ->release is next called, then do no
truncate away the speculative preallocation - leave it there so that
subsequent writes do not need to reallocate the delalloc space. This
will prevent interleaving of extents of different inodes written
concurrently to the same AG.
If we get this wrong, it is not a big deal as we truncate
speculative allocation beyond EOF anyway in xfs_inactive() when the
inode is thrown out of the cache.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
This patch adds support for 32bit project quota identifiers.
On disk format is backward compatible with 16bit projid numbers. projid
on disk is now kept in two 16bit values - di_projid_lo (which holds the
same position as old 16bit projid value) and new di_projid_hi (takes
existing padding) and converts from/to 32bit value on the fly.
xfs_admin (for existing fs), mkfs.xfs (for new fs) needs to be used
to enable PROJID32BIT support.
Signed-off-by: Arkadiusz Miśkiewicz <arekm@maven.pl>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
Stop having two different names for many buffer functions and use
the more descriptive xfs_buf_* names directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
We're not actually passing around credentials inside XFS for a while
now, so remove all xfs_cred.h with it's cred_t typedef and all
instances of it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
xfs_buf_get_nodaddr() is really used to allocate a buffer that is
uncached. While it is not directly assigned a disk address, the fact
that they are not cached is a more important distinction. With the
upcoming uncached buffer read primitive, we should be consistent
with this disctinction.
While there, make page allocation in xfs_buf_get_nodaddr() safe
against memory reclaim re-entrancy into the filesystem by allowing
a flags parameter to be passed.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
|
|
Under heavy multi-way parallel create workloads, the VFS struggles
to write back all the inodes that have been changed in age order.
The bdi flusher thread becomes CPU bound, spending 85% of it's time
in the VFS code, mostly traversing the superblock dirty inode list
to separate dirty inodes old enough to flush.
We already keep an index of all metadata changes in age order - in
the AIL - and continued log pressure will do age ordered writeback
without any extra overhead at all. If there is no pressure on the
log, the xfssyncd will periodically write back metadata in ascending
disk address offset order so will be very efficient.
Hence we can stop marking VFS inodes dirty during transaction commit
or when changing timestamps during transactions. This will keep the
inodes in the superblock dirty list to those containing data or
unlogged metadata changes.
However, the timstamp changes are slightly more complex than this -
there are a couple of places that do unlogged updates of the
timestamps, and the VFS need to be informed of these. Hence add a
new function xfs_trans_ichgtime() for transactional changes,
and leave xfs_ichgtime() for the non-transactional changes.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
XFS_IOC_ZERO_RANGE is the equivalent of an atomic XFS_IOC_UNRESVSP/
XFS_IOC_RESVSP call pair. It enabled ranges of written data to be
turned into zeroes without requiring IO or having to free and
reallocate the extents in the range given as would occur if we had
to punch and then preallocate them separately. This enables
applications to zero parts of files very quickly without changing
the layout of the files in any way.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
If we attempt to preallocate more than 2^32 blocks of space in a
single syscall, the transaction block reservation will overflow
leading to a hangs in the superblock block accounting code. This
is trivially reproduced with xfs_io. Fix the problem by capping the
allocation reservation to the maximum number of blocks a single
xfs_bmapi() call can allocate (2^21 blocks).
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Convert XFS to the new truncate sequence. We still can have errors after
updating the file size in xfs_setattr, but these are real I/O errors and lead
to a transaction abort and filesystem shutdown, so they are not an issue.
Errors from ->write_begin and write_end can now be handled correctly because
we can actually get rid of the delalloc extents while previous the buffer
state was stipped in block_invalidatepage.
There is still no error handling for ->direct_IO, because doing so will need
some major restructuring given that we only have the iolock shared and do not
hold i_mutex at all. Fortunately leaving the normally allocated blocks behind
there is not a major issue and this will get cleaned up by xfs_free_eofblock
later.
Note: the patch is against Al's vfs.git tree as that contains the nessecary
preparations. I'd prefer to get it applied there so that we can get some
testing in linux-next.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
map_len is unsigned. Checking map_len <= 0 is buggy when it should be
below zero. So, check exact expression instead of map_len.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
Replace the xfs_itrace_entry catchall with specific trace points. For
most simple callers we now use the simple inode class, which used to
be the iget class, but add more details tracing for namespace events,
which now includes the name of the directory entries manipulated.
Remove the xfs_inactive trace point, which is a duplicate of the clear_inode
one, and the xfs_change_file_space trace point, which is immediately
followed by the more specific alloc/free space trace points.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
This code was introduced four years ago in commit
3e57ecf640428c01ba1ed8c8fc538447ada1715b without any review and has
been unused since. Remove it just as the rest of the code introduced
in that commit to reduce that stack usage and complexity in this central
piece of code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
Currently we need to either call IHOLD or xfs_trans_ihold on an inode when
joining it to a transaction via xfs_trans_ijoin.
This patches instead makes xfs_trans_ijoin usable on it's own by doing
an implicity xfs_trans_ihold, which also allows us to drop the third
argument. For the case where we want to hold a reference on the inode
a xfs_trans_ijoin_ref wrapper is added which does the IHOLD and marks
the inode for needing an xfs_iput. In addition to the cleaner interface
to the caller this also simplifies the implementation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
|
|
Dmapi support was never merged upstream, but we still have a lot of hooks
bloating XFS for it, all over the fast pathes of the filesystem.
This patch drops over 700 lines of dmapi overhead. If we'll ever get HSM
support in mainline at least the namespace events can be done much saner
in the VFS instead of the individual filesystem, so it's not like this
is much help for future work.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
The block number comes from bulkstat based inode lookups to shortcut
the mapping calculations. We ar enot able to trust anything from
bulkstat, so drop the block number as well so that the correct
lookups and mappings are always done.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
The new xfsqa test 228 tries to preallocate more space than the
filesystem contains. it should fail, but instead triggers an assert
about lock flags. The failure is due to the size extension failing
in vmtruncate() due to rlimit being set. Check this before we start
the preallocation to avoid allocating space that will never be used.
Also the path through xfs_vn_allocate already holds the IO lock, so
it should not be present in the lock flags when the setattr fails.
Hence the assert needs to take this into account. This will prevent
other such callers from hitting this incorrect ASSERT.
(Fixed a reference to "newsize" to read "new_size". -Alex)
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
Currently the fsync file operation is divided into a low-level
routine doing all the work and one that implements the Linux file
operation and does minimal argument wrapping. This is a leftover
from the days of the vnode operations layer and can be removed to
simplify the code a bit, as well as preparing for the implementation
of an optimized fdatasync which needs to look at the Linux inode
state.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
If we have a pinned inode it must have a log item attached to it.
Usually that log item will have ili_last_lsn already set, in which
case we only need to flush the log up to that LSN instead of doing a
full log force. This gives speedups of about 5% in some fsync heavy
workloads.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
We always need to flush the disk write cache and can't skip it just because
the no inode attributes have changed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
|
|
Remove the XFS_LOG_FORCE argument which was always set, and the
XFS_LOG_URGE define, which was never used.
Split xfs_log_force into a two helpers - xfs_log_force which forces
the whole log, and xfs_log_force_lsn which forces up to the
specified LSN. The underlying implementations already were entirely
separate, as were the users.
Also re-indent the new _xfs_log_force/_xfs_log_force which
previously had a weird coding style.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
Currently we define aliases for the buffer flags in various
namespaces, which only adds confusion. Remove all but the XBF_
flags to clean this up a bit.
Note that we still abuse XFS_B_ASYNC/XBF_ASYNC for some non-buffer
uses, but I'll clean that up later.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
dmops uses a signed char for it's namespace event. To be consistent
with the rest of the code, convert them to unsigned char for the
namespace string.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
We currently have some rather odd code in xfs_setattr for
updating the a/c/mtime timestamps:
- first we do a non-transaction update if all three are updated
together
- second we implicitly update the ctime for various changes
instead of relying on the ATTR_CTIME flag
- third we set the timestamps to the current time instead of the
arguments in the iattr structure in many cases.
This patch makes sure we update it in a consistent way:
- always transactional
- ctime is only updated if ATTR_CTIME is set or we do a size
update, which is a special case
- always to the times passed in from the caller instead of the
current time
The only non-size caller of xfs_setattr that doesn't come from
the VFS is updated to set ATTR_CTIME and pass in a valid ctime
value.
Reported-by: Eric Blake <ebb9@byu.net>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
Convert the old xfs tracing support that could only be used with the
out of tree kdb and xfsidbg patches to use the generic event tracer.
To use it make sure CONFIG_EVENT_TRACING is enabled and then enable
all xfs trace channels by:
echo 1 > /sys/kernel/debug/tracing/events/xfs/enable
or alternatively enable single events by just doing the same in one
event subdirectory, e.g.
echo 1 > /sys/kernel/debug/tracing/events/xfs/xfs_ihold/enable
or set more complex filters, etc. In Documentation/trace/events.txt
all this is desctribed in more detail. To reads the events do a
cat /sys/kernel/debug/tracing/trace
Compared to the last posting this patch converts the tracing mostly to
the one tracepoint per callsite model that other users of the new
tracing facility also employ. This allows a very fine-grained control
of the tracing, a cleaner output of the traces and also enables the
perf tool to use each tracepoint as a virtual performance counter,
allowing us to e.g. count how often certain workloads git various
spots in XFS. Take a look at
http://lwn.net/Articles/346470/
for some examples.
Also the btree tracing isn't included at all yet, as it will require
additional core tracing features not in mainline yet, I plan to
deliver it later.
And the really nice thing about this patch is that it actually removes
many lines of code while adding this nice functionality:
fs/xfs/Makefile | 8
fs/xfs/linux-2.6/xfs_acl.c | 1
fs/xfs/linux-2.6/xfs_aops.c | 52 -
fs/xfs/linux-2.6/xfs_aops.h | 2
fs/xfs/linux-2.6/xfs_buf.c | 117 +--
fs/xfs/linux-2.6/xfs_buf.h | 33
fs/xfs/linux-2.6/xfs_fs_subr.c | 3
fs/xfs/linux-2.6/xfs_ioctl.c | 1
fs/xfs/linux-2.6/xfs_ioctl32.c | 1
fs/xfs/linux-2.6/xfs_iops.c | 1
fs/xfs/linux-2.6/xfs_linux.h | 1
fs/xfs/linux-2.6/xfs_lrw.c | 87 --
fs/xfs/linux-2.6/xfs_lrw.h | 45 -
fs/xfs/linux-2.6/xfs_super.c | 104 ---
fs/xfs/linux-2.6/xfs_super.h | 7
fs/xfs/linux-2.6/xfs_sync.c | 1
fs/xfs/linux-2.6/xfs_trace.c | 75 ++
fs/xfs/linux-2.6/xfs_trace.h | 1369 +++++++++++++++++++++++++++++++++++++++++
fs/xfs/linux-2.6/xfs_vnode.h | 4
fs/xfs/quota/xfs_dquot.c | 110 ---
fs/xfs/quota/xfs_dquot.h | 21
fs/xfs/quota/xfs_qm.c | 40 -
fs/xfs/quota/xfs_qm_syscalls.c | 4
fs/xfs/support/ktrace.c | 323 ---------
fs/xfs/support/ktrace.h | 85 --
fs/xfs/xfs.h | 16
fs/xfs/xfs_ag.h | 14
fs/xfs/xfs_alloc.c | 230 +-----
fs/xfs/xfs_alloc.h | 27
fs/xfs/xfs_alloc_btree.c | 1
fs/xfs/xfs_attr.c | 107 ---
fs/xfs/xfs_attr.h | 10
fs/xfs/xfs_attr_leaf.c | 14
fs/xfs/xfs_attr_sf.h | 40 -
fs/xfs/xfs_bmap.c | 507 +++------------
fs/xfs/xfs_bmap.h | 49 -
fs/xfs/xfs_bmap_btree.c | 6
fs/xfs/xfs_btree.c | 5
fs/xfs/xfs_btree_trace.h | 17
fs/xfs/xfs_buf_item.c | 87 --
fs/xfs/xfs_buf_item.h | 20
fs/xfs/xfs_da_btree.c | 3
fs/xfs/xfs_da_btree.h | 7
fs/xfs/xfs_dfrag.c | 2
fs/xfs/xfs_dir2.c | 8
fs/xfs/xfs_dir2_block.c | 20
fs/xfs/xfs_dir2_leaf.c | 21
fs/xfs/xfs_dir2_node.c | 27
fs/xfs/xfs_dir2_sf.c | 26
fs/xfs/xfs_dir2_trace.c | 216 ------
fs/xfs/xfs_dir2_trace.h | 72 --
fs/xfs/xfs_filestream.c | 8
fs/xfs/xfs_fsops.c | 2
fs/xfs/xfs_iget.c | 111 ---
fs/xfs/xfs_inode.c | 67 --
fs/xfs/xfs_inode.h | 76 --
fs/xfs/xfs_inode_item.c | 5
fs/xfs/xfs_iomap.c | 85 --
fs/xfs/xfs_iomap.h | 8
fs/xfs/xfs_log.c | 181 +----
fs/xfs/xfs_log_priv.h | 20
fs/xfs/xfs_log_recover.c | 1
fs/xfs/xfs_mount.c | 2
fs/xfs/xfs_quota.h | 8
fs/xfs/xfs_rename.c | 1
fs/xfs/xfs_rtalloc.c | 1
fs/xfs/xfs_rw.c | 3
fs/xfs/xfs_trans.h | 47 +
fs/xfs/xfs_trans_buf.c | 62 -
fs/xfs/xfs_vnodeops.c | 8
70 files changed, 2151 insertions(+), 2592 deletions(-)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
Currently the low-level buffer cache interfaces are highly confusing
as we have a _flags variant of each that does actually respect the
flags, and one without _flags which has a flags argument that gets
ignored and overriden with a default set. Given that very few places
use the default arguments get rid of the duplication and convert all
callers to pass the flags explicitly. Also remove the now confusing
_flags postfix.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
When xfs_free_eofblocks is called from ->release the VM might already
hold the mmap_sem, but in the write path we take the iolock before
taking the mmap_sem in the generic write code.
Switch xfs_free_eofblocks to only trylock the iolock if called from
->release and skip trimming the prellocated blocks in that case.
We'll still free them later on the final iput.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
Currently the reclaim code for the case where we don't reclaim the
final reclaim is overly complicated. We know that the inode is clean
but instead of just directly reclaiming the clean inode we go through
the whole process of marking the inode reclaimable just to directly
reclaim it from the calling context. Besides being overly complicated
this introduces a race where iget could recycle an inode between
marked reclaimable and actually being reclaimed leading to panics.
This patch gets rid of the existing reclaim path, and replaces it with
a simple call to xfs_ireclaim if the inode was clean. While we're at
it we also use the slightly more lax xfs_inode_clean check we'd use
later to determine if we need to flush the inode here.
Finally get rid of xfs_reclaim function and place the remaining small
bits of reclaim code directly into xfs_fs_destroy_inode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Patrick Schreurs <patrick@news-service.com>
Reported-by: Tommy van Leeuwen <tommy@news-service.com>
Tested-by: Patrick Schreurs <patrick@news-service.com>
Reviewed-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
This is picking up on Felix's repost of Dave's patch to implement a
.dirty_inode method. We really need this notification because
the VFS keeps writing directly into the inode structure instead
of going through methods to update this state. In addition to
the long-known atime issue we now also have a caller in VM code
that updates c/mtime that way for shared writeable mmaps. And
I found another one that no one has noticed in practice in the FIFO
code.
So implement ->dirty_inode to set i_update_core whenever the
inode gets externally dirtied, and switch the c/mtime handling to
the same scheme we already use for atime (always picking up
the value from the Linux inode).
Note that this patch also removes the xfs_synchronize_atime call
in xfs_reclaim it was superflous as we already synchronize the time
when writing the inode via the log (xfs_inode_item_format) or the
normal buffers (xfs_iflush_int).
In addition also remove the I_CLEAR check before copying the Linux
timestamps - now that we always have the Linux inode available
we can always use the timestamps in it.
Also switch to just using file_update_time for regular reads/writes -
that will get us all optimization done to it for free and make
sure we notice early when it breaks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Reviewed-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
We added the ENOSPC handling patch in xfs_create just after it got mered
with xfs_mkdir. Change the log reservation to the variable for either
the create or mkdir value so it does the right thing if get here for creating
a directory.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
The guarantees for O_SYNC are exactly the same as the ones we need to
make for an fsync call (and given that Linux O_SYNC is O_DSYNC the
equivalent is fdadatasync, but we treat both the same in XFS), except
with a range data writeout. Jan Kara has started unifying these two
path for filesystems using the generic helpers, and I've started to
look at XFS.
The actual transaction commited by xfs_fsync and xfs_write_sync_logforce
has a different transaction number, but actually is exactly the same.
We'll only use the fsync transaction going forward. One major difference
is that xfs_write_sync_logforce never issues a cache flush unless we
commit a transaction causing that as a side-effect, which is an obvious
bug in the O_SYNC handling. Second all the locking and i_update_size
vs i_update_core changes from 978b7237123d007b9fa983af6e0e2fa8f97f9934
never made it to xfs_write_sync_logforce, so we add them back.
To make xfs_fsync easily usable from the O_SYNC path, the filemap_fdatawait
call is moved up to xfs_file_fsync, so that we don't wait on the whole
file after we already waited for our portion in xfs_write.
We'll also use a plain call to filemap_write_and_wait_range instead
of the previous sync_page_rang which did it in two steps including
an half-hearted inode write out that doesn't help us.
Once we're done with this also remove the now useless i_update_size
tracking.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
|
|
A lot more functions could be made static, but they need
forward declarations; this does some easy ones, and also
found a few unused functions in the process.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
|
|
xfs_readlink_bmap is called with i_lock held, but i_lock is taken in
reclaim context so all allocations under it must avoid recursions into
the filesystem.
Reported by the new reclaim context tracing in lockdep.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
|
|
This patch rips out the XFS ACL handling code and uses the generic
fs/posix_acl.c code instead. The ondisk format is of course left
unchanged.
This also introduces the same ACL caching all other Linux filesystems do
by adding pointers to the acl and default acl in struct xfs_inode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
|
|
Kill the quota ops function vector and replace it with direct calls or
stubs in the CONFIG_XFS_QUOTA=n case.
Make sure we check XFS_IS_QUOTA_RUNNING in the right spots. We can remove
the number of those checks because the XFS_TRANS_DQ_DIRTY flag can't be set
otherwise.
This brings us back closer to the way this code worked in IRIX and earlier
Linux versions, but we keep a lot of the more useful factoring of common
code.
Eventually we should also kill xfs_qm_bhv.c, but that's left for a later
patch.
Reduces the size of the source code by about 250 lines and the size of
XFS module by about 1.5 kilobytes with quotas enabled:
text data bss dec hex filename
615957 2960 3848 622765 980ad fs/xfs/xfs.o
617231 3152 3848 624231 98667 fs/xfs/xfs.o.old
Fallout:
- xfs_qm_dqattach is split into xfs_qm_dqattach_locked which expects
the inode locked and xfs_qm_dqattach which does the locking around it,
thus removing XFS_QMOPT_ILOCKED.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
|
|
If we are creating lots of small files, we can fail to get
a reservation for inode create earlier than we should due to
EOF preallocation done during delayed allocation reservation.
Hence on the first reservation ENOSPC failure flush all the
delayed allocation blocks out of the system and retry.
This fixes the last commonly triggered spurious ENOSPC issue
that has been reported.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Signed-off-by: Malcolm Parsons <malcolm.parsons@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Remove this rather pointless wrapper and use is_bad_inode directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
|
|
xfs_create and xfs_mkdir only have minor differences, so merge both of them
into a sigle function. While we're at it also make the error handling code
more straight-forward.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Dave Chinner <david@fromorbit.com>
|
|
Splitting the task for a VFS-induced inode flush into two functions doesn't
make any sense, so merge the two functions dealing with it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Reviewed-by: Dave Chinner <david@fromorbit.com>
|
|
The source and target inodes are guaranteed to never be the same by the VFS,
so no need to check for that (and we would get into bad trouble later anyway
if that were the case). Also clean up the error handling to use two gotos
instead of nested conditions.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
|
|
Remove the last of the macros-defined-to-static-functions.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
|
Instead of implementing our own checks use inode_change_ok to check for
necessary permission in setattr. There is a slight change in behaviour
as inode_change_ok doesn't allow i_mode updates to add the suid or sgid
without superuser privilegues while the old XFS code just stripped away
those bits from the file mode.
(First sent on Semptember 29th)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
|
We check the return value of all other calls to xfs_buf_get_noaddr().
Make sense to do it here too.
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
|
|
The whole machinery to wait on I/O completion is related to the I/O path
and should be there instead of in xfs_vnode.c. Also give the functions
more descriptive names.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
|
