summaryrefslogtreecommitdiffstats
path: root/fs/xfs
AgeCommit message (Collapse)Author
2012-08-01Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull second vfs pile from Al Viro: "The stuff in there: fsfreeze deadlock fixes by Jan (essentially, the deadlock reproduced by xfstests 068), symlink and hardlink restriction patches, plus assorted cleanups and fixes. Note that another fsfreeze deadlock (emergency thaw one) is *not* dealt with - the series by Fernando conflicts a lot with Jan's, breaks userland ABI (FIFREEZE semantics gets changed) and trades the deadlock for massive vfsmount leak; this is going to be handled next cycle. There probably will be another pull request, but that stuff won't be in it." Fix up trivial conflicts due to unrelated changes next to each other in drivers/{staging/gdm72xx/usb_boot.c, usb/gadget/storage_common.c} * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (54 commits) delousing target_core_file a bit Documentation: Correct s_umount state for freeze_fs/unfreeze_fs fs: Remove old freezing mechanism ext2: Implement freezing btrfs: Convert to new freezing mechanism nilfs2: Convert to new freezing mechanism ntfs: Convert to new freezing mechanism fuse: Convert to new freezing mechanism gfs2: Convert to new freezing mechanism ocfs2: Convert to new freezing mechanism xfs: Convert to new freezing code ext4: Convert to new freezing mechanism fs: Protect write paths by sb_start_write - sb_end_write fs: Skip atime update on frozen filesystem fs: Add freezing handling to mnt_want_write() / mnt_drop_write() fs: Improve filesystem freezing handling switch the protection of percpu_counter list to spinlock nfsd: Push mnt_want_write() outside of i_mutex btrfs: Push mnt_want_write() outside of i_mutex fat: Push mnt_want_write() outside of i_mutex ...
2012-07-31xfs: Convert to new freezing codeJan Kara
Generic code now blocks all writers from standard write paths. So we add blocking of all writers coming from ioctl (we get a protection of ioctl against racing remount read-only as a bonus) and convert xfs_file_aio_write() to a non-racy freeze protection. We also keep freeze protection on transaction start to block internal filesystem writes such as removal of preallocated blocks. CC: Ben Myers <bpm@sgi.com> CC: Alex Elder <elder@kernel.org> CC: xfs@oss.sgi.com Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-30Merge tag 'for-linus-v3.6-rc1' of git://oss.sgi.com/xfs/xfsLinus Torvalds
Pull xfs update from Ben Myers: "Numerous cleanups and several bug fixes. Here are some highlights: - Discontiguous directory buffer support - Inode allocator refactoring - Removal of the IO lock in inode reclaim - Implementation of .update_time - Fix for handling of EOF in xfs_vm_writepage - Fix for races in xfsaild, and idle mode is re-enabled - Fix for a crash in xfs_buf completion handlers on unmount." Fix up trivial conflicts in fs/xfs/{xfs_buf.c,xfs_log.c,xfs_log_priv.h} due to duplicate patches that had already been merged for 3.5. * tag 'for-linus-v3.6-rc1' of git://oss.sgi.com/xfs/xfs: (44 commits) xfs: wait for the write the superblock on unmount xfs: re-enable xfsaild idle mode and fix associated races xfs: remove iolock lock classes xfs: avoid the iolock in xfs_free_eofblocks for evicted inodes xfs: do not take the iolock in xfs_inactive xfs: remove xfs_inactive_attrs xfs: clean up xfs_inactive xfs: do not read the AGI buffer in xfs_dialloc until nessecary xfs: refactor xfs_ialloc_ag_select xfs: add a short cut to xfs_dialloc for the non-NULL agbp case xfs: remove the alloc_done argument to xfs_dialloc xfs: split xfs_dialloc xfs: remove xfs_ialloc_find_free Prefix IO_XX flags with XFS_IO_XX to avoid namespace colision. xfs: remove xfs_inotobp xfs: merge xfs_itobp into xfs_imap_to_bp xfs: handle EOF correctly in xfs_vm_writepage xfs: implement ->update_time xfs: fix comment typo of struct xfs_da_blkinfo. xfs: do not call xfs_bdstrat_cb in xfs_buf_iodone_callbacks ...
2012-07-29xfs: wait for the write the superblock on unmountMark Tinguely
v2: Add the xfs_buf_lock to xfs_quiesce_attr(). Add explaination why xfs_buf_lock() is used to wait for write. xfs_wait_buftarg() does not wait for the completion of the write of the uncached superblock. This write can race with the shutdown of the log and causes a panic if the write does not win the race. During the log write, xfsaild_push() will lock the buffer and set the XBF_ASYNC flag. Because the XBF_FLAG is set, complete() is not performed on the buffer's iowait entry, we cannot call xfs_buf_iowait() to wait for the write to complete. The buffer's lock is held until the write is complete, so we can block on a xfs_buf_lock() request to be notified that the write is complete. Signed-off-by: Mark Tinguely <tinguely@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-07-29xfs: re-enable xfsaild idle mode and fix associated racesBrian Foster
xfsaild idle mode logic currently leads to a couple hangs: 1.) If xfsaild is rescheduled in during an incremental scan (i.e., tout != 0) and the target has been updated since the previous run, we can hit the new target and go into idle mode with a still populated ail. 2.) A wake up is only issued when the target is pushed forward. The wake up can race with xfsaild if it is currently in the process of entering idle mode, causing future wake up events to be lost. These hangs have been reproduced and verified as fixed by running xfstests 273 in a loop on a slightly modified upstream kernel. The kernel is modified to re-enable idle mode as previously implemented (when count == 0) and with a revert of commit 670ce93f, which includes performance improvements that make this harder to reproduce. The solution, the algorithm for which has been outlined by Dave Chinner, is to modify xfsaild to enter idle mode only when the ail is empty and the push target has not been moved forward since the last push. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-07-29xfs: remove iolock lock classesChristoph Hellwig
Content-Disposition: inline; filename=xfs-remove-iolock-classes Now that we never take the iolock during inode reclaim we don't need to play games with lock classes. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Rich Johnston <rjohnston@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-07-29xfs: avoid the iolock in xfs_free_eofblocks for evicted inodesChristoph Hellwig
Same rational as the last patch - these inodes are not reachable, so don't bother with locking. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Rich Johnston <rjohnston@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-07-29xfs: do not take the iolock in xfs_inactiveChristoph Hellwig
An inode that enters xfs_inactive has been removed from all global lists but the inode hash, and can't be recycled in xfs_iget before it has been marked reclaimable. Thus taking the iolock in here is not nessecary at all, and given the amount of lockdep false positives it has triggered already I'd rather remove the locking. The only change outside of xfs_inactive is relaxing an assert in xfs_itruncate_extents. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Rich Johnston <rjohnston@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-07-29xfs: remove xfs_inactive_attrsChristoph Hellwig
Remove this helper as the code flow is a lot more obvious when it gets merged into its only caller. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Rich Johnston <rjohnston@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-07-29xfs: clean up xfs_inactiveChristoph Hellwig
The code to reserve log space and join the inode to the transaction is common for all cases, so don't duplicate it. Also remove the trivial xfs_inactive_symlink_local helper which can simply be opencode now. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Rich Johnston <rjohnston@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-07-29xfs: do not read the AGI buffer in xfs_dialloc until nessecaryChristoph Hellwig
Refactor the AG selection loop in xfs_dialloc to operate on the in-memory perag data as much as possible. We only read the AGI buffer once we have selected an AG to allocate inodes now instead of for every AG considered. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-07-29xfs: refactor xfs_ialloc_ag_selectChristoph Hellwig
Loop over the in-core perag structures and prefer using pagi_freecount over going out to the AGI buffer where possible. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-07-29xfs: add a short cut to xfs_dialloc for the non-NULL agbp caseChristoph Hellwig
In this case we already have selected an AG and know it has free space beause the buffer lock never got released. Jump directly into xfs_dialloc_ag and short cut the AG selection loop. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-07-29xfs: remove the alloc_done argument to xfs_diallocChristoph Hellwig
We can simplify check the IO_agbp pointer for being non-NULL instead of passing another argument through two layers of function calls. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-07-29xfs: split xfs_diallocChristoph Hellwig
Move the actual allocation once we have selected an allocation group into a separate helper, and make xfs_dialloc a wrapper around it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-07-23Merge branch 'for-linus-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull the big VFS changes from Al Viro: "This one is *big* and changes quite a few things around VFS. What's in there: - the first of two really major architecture changes - death to open intents. The former is finally there; it was very long in making, but with Miklos getting through really hard and messy final push in fs/namei.c, we finally have it. Unlike his variant, this one doesn't introduce struct opendata; what we have instead is ->atomic_open() taking preallocated struct file * and passing everything via its fields. Instead of returning struct file *, it returns -E... on error, 0 on success and 1 in "deal with it yourself" case (e.g. symlink found on server, etc.). See comments before fs/namei.c:atomic_open(). That made a lot of goodies finally possible and quite a few are in that pile: ->lookup(), ->d_revalidate() and ->create() do not get struct nameidata * anymore; ->lookup() and ->d_revalidate() get lookup flags instead, ->create() gets "do we want it exclusive" flag. With the introduction of new helper (kern_path_locked()) we are rid of all struct nameidata instances outside of fs/namei.c; it's still visible in namei.h, but not for long. Come the next cycle, declaration will move either to fs/internal.h or to fs/namei.c itself. [me, miklos, hch] - The second major change: behaviour of final fput(). Now we have __fput() done without any locks held by caller *and* not from deep in call stack. That obviously lifts a lot of constraints on the locking in there. Moreover, it's legal now to call fput() from atomic contexts (which has immediately simplified life for aio.c). We also don't need anti-recursion logics in __scm_destroy() anymore. There is a price, though - the damn thing has become partially asynchronous. For fput() from normal process we are guaranteed that pending __fput() will be done before the caller returns to userland, exits or gets stopped for ptrace. For kernel threads and atomic contexts it's done via schedule_work(), so theoretically we might need a way to make sure it's finished; so far only one such place had been found, but there might be more. There's flush_delayed_fput() (do all pending __fput()) and there's __fput_sync() (fput() analog doing __fput() immediately). I hope we won't need them often; see warnings in fs/file_table.c for details. [me, based on task_work series from Oleg merged last cycle] - sync series from Jan - large part of "death to sync_supers()" work from Artem; the only bits missing here are exofs and ext4 ones. As far as I understand, those are going via the exofs and ext4 trees resp.; once they are in, we can put ->write_super() to the rest, along with the thread calling it. - preparatory bits from unionmount series (from dhowells). - assorted cleanups and fixes all over the place, as usual. This is not the last pile for this cycle; there's at least jlayton's ESTALE work and fsfreeze series (the latter - in dire need of fixes, so I'm not sure it'll make the cut this cycle). I'll probably throw symlink/hardlink restrictions stuff from Kees into the next pile, too. Plus there's a lot of misc patches I hadn't thrown into that one - it's large enough as it is..." * 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (127 commits) ext4: switch EXT4_IOC_RESIZE_FS to mnt_want_write_file() btrfs: switch btrfs_ioctl_balance() to mnt_want_write_file() switch dentry_open() to struct path, make it grab references itself spufs: shift dget/mntget towards dentry_open() zoran: don't bother with struct file * in zoran_map ecryptfs: don't reinvent the wheels, please - use struct completion don't expose I_NEW inodes via dentry->d_inode tidy up namei.c a bit unobfuscate follow_up() a bit ext3: pass custom EOF to generic_file_llseek_size() ext4: use core vfs llseek code for dir seeks vfs: allow custom EOF in generic_file_llseek code vfs: Avoid unnecessary WB_SYNC_NONE writeback during sys_sync and reorder sync passes vfs: Remove unnecessary flushing of block devices vfs: Make sys_sync writeout also block device inodes vfs: Create function for iterating over block devices vfs: Reorder operations during sys_sync quota: Move quota syncing to ->sync_fs method quota: Split dquot_quota_sync() to writeback and cache flushing part vfs: Move noop_backing_dev_info check from sync into writeback ...
2012-07-23switch dentry_open() to struct path, make it grab references itselfAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-22xfs: remove xfs_ialloc_find_freeChristoph Hellwig
This function is entirely trivial and only has one caller, so remove it to simplify the code. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-07-22Prefix IO_XX flags with XFS_IO_XX to avoid namespace colision.Alain Renaud
Add a XFS_ prefix to IO_DIRECT,XFS_IO_DELALLOC, XFS_IO_UNWRITTEN and XFS_IO_OVERWRITE. This to avoid namespace conflict with other modules. Signed-off-by: Alain Renaud <arenaud@sgi.com> Reviewed-by: Rich Johnston <rjohnston@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-07-22xfs: remove xfs_inotobpChristoph Hellwig
There is no need to keep this helper around, opencoding it in the only caller is just as clear. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-07-22xfs: merge xfs_itobp into xfs_imap_to_bpChristoph Hellwig
All callers of xfs_imap_to_bp want the dinode pointer, so let's calculate it inside xfs_imap_to_bp. Once that is done xfs_itobp becomes a fairly pointless wrapper which can be replaced with direct calls to xfs_imap_to_bp. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-07-22xfs: handle EOF correctly in xfs_vm_writepageChristoph Hellwig
We need to zero out part of a page which beyond EOF before setting uptodate, otherwise, mapread or write will see non-zero data beyond EOF. Based on the code in fs/buffer.c and the following ext4 commit: ext4: handle EOF correctly in ext4_bio_write_page() And yes, I wish we had a good test case for it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-07-22xfs: implement ->update_timeChristoph Hellwig
Use this new method to replace our hacky use of ->dirty_inode. An additional benefit is that we can now propagate errors up the stack. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-07-22xfs: fix comment typo of struct xfs_da_blkinfo.Chen Baozi
Fix trivial typo error that has written "It" to "Is". Signed-off-by: Chen Baozi <baozich@gmail.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-07-14don't pass nameidata to ->create()Al Viro
boolean "does it have to be exclusive?" flag is passed instead; Local filesystem should just ignore it - the object is guaranteed not to be there yet. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-14stop passing nameidata to ->lookup()Al Viro
Just the flags; only NFS cares even about that, but there are legitimate uses for such argument. And getting rid of that completely would require splitting ->lookup() into a couple of methods (at least), so let's leave that alone for now... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-13xfs: do not call xfs_bdstrat_cb in xfs_buf_iodone_callbacksChristoph Hellwig
xfs_bdstrat_cb only adds a check for a shutdown filesystem over xfs_buf_iorequest, but xfs_buf_iodone_callbacks just checked for a shut down filesystem a little earlier. In addition the shutdown handling in xfs_bdstrat_cb is not very suitable for this caller. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-07-13xfs: prevent recursion in xfs_buf_iorequestChristoph Hellwig
If the b_iodone handler is run in calling context in xfs_buf_iorequest we can run into a recursion where xfs_buf_iodone_callbacks keeps calling back into xfs_buf_iorequest because an I/O error happened, which keeps calling back into xfs_buf_iorequest. This chain will usually not take long because the filesystem gets shut down because of log I/O errors, but even over a short time it can cause stack overflows if run on the same context. As a short term workaround make sure we always call the iodone handler in workqueue context. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-07-13xfs: don't defer metadata allocation to the workqueueDave Chinner
Almost all metadata allocations come from shallow stack usage situations. Avoid the overhead of switching the allocation to a workqueue as we are not in danger of running out of stack when making these allocations. Metadata allocations are already marked through the args that are passed down, so this is trivial to do. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reported-by: Mel Gorman <mgorman@suse.de> Tested-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-07-13xfs: really fix the cursor leak in xfs_alloc_ag_vextent_nearDave Chinner
The current cursor is reallocated when retrying the allocation, so the existing cursor needs to be destroyed in both the restart and the failure cases. Signed-off-by: Dave Chinner <dchinner@redhat.com> Tested-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-07-13xfs: do not call xfs_bdstrat_cb in xfs_buf_iodone_callbacksChristoph Hellwig
xfs_bdstrat_cb only adds a check for a shutdown filesystem over xfs_buf_iorequest, but xfs_buf_iodone_callbacks just checked for a shut down filesystem a little earlier. In addition the shutdown handling in xfs_bdstrat_cb is not very suitable for this caller. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-07-13xfs: prevent recursion in xfs_buf_iorequestChristoph Hellwig
If the b_iodone handler is run in calling context in xfs_buf_iorequest we can run into a recursion where xfs_buf_iodone_callbacks keeps calling back into xfs_buf_iorequest because an I/O error happened, which keeps calling back into xfs_buf_iorequest. This chain will usually not take long because the filesystem gets shut down because of log I/O errors, but even over a short time it can cause stack overflows if run on the same context. As a short term workaround make sure we always call the iodone handler in workqueue context. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-07-13xfs: don't defer metadata allocation to the workqueueDave Chinner
Almost all metadata allocations come from shallow stack usage situations. Avoid the overhead of switching the allocation to a workqueue as we are not in danger of running out of stack when making these allocations. Metadata allocations are already marked through the args that are passed down, so this is trivial to do. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reported-by: Mel Gorman <mgorman@suse.de> Tested-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-07-13xfs: really fix the cursor leak in xfs_alloc_ag_vextent_nearDave Chinner
The current cursor is reallocated when retrying the allocation, so the existing cursor needs to be destroyed in both the restart and the failure cases. Signed-off-by: Dave Chinner <dchinner@redhat.com> Tested-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-07-01xfs: factor buffer reading from xfs_dir2_leaf_getdentsDave Chinner
The buffer reading code in xfs_dir2_leaf_getdents is complex and difficult to follow due to the readahead and all the context is carries. it is also badly indented and so difficult to read. Factor it out into a separate function to make it easier to understand and optimise in future patches. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-07-01xfs: remove struct xfs_dabuf and infrastructureDave Chinner
The struct xfs_dabuf now only tracks a single xfs_buf and all the information it holds can be gained directly from the xfs_buf. Hence we can remove the struct dabuf and pass the xfs_buf around everywhere. Kill the struct dabuf and the associated infrastructure. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-07-01xfs: use discontiguous xfs_buf support in dabuf wrappersDave Chinner
First step in converting the directory code to use native discontiguous buffers and replacing the dabuf construct. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-07-01xfs: support discontiguous buffers in the xfs_buf_log_itemDave Chinner
discontigous buffer in separate buffer format structures. This means log recovery will recover all the changes on a per segment basis without requiring any knowledge of the fact that it was logged from a compound buffer. To do this, we need to be able to determine what buffer segment any given offset into the compound buffer sits over. This enables us to translate the dirty bitmap in the number of separate buffer format structures required. We also need to be able to determine the number of bitmap elements that a given buffer segment has, as this determines the size of the buffer format structure. Hence we need to be able to determine the both the start offset into the buffer and the length of a given segment to be able to calculate this. With this information, we can preallocate, build and format the correct log vector array for each segment in a compound buffer to appear exactly the same as individually logged buffers in the log. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-07-01xfs: add discontiguous buffer support to transactionsDave Chinner
Now that the buffer cache supports discontiguous buffers, add support to the transaction buffer interface for getting and reading buffers. Note that this patch does not convert the buffer item logging to support discontiguous buffers. That will be done as a separate commit. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-07-01xfs: add discontiguous buffer map interfaceDave Chinner
With the internal interfaces supporting discontiguous buffer maps, add external lookup, read and get interfaces so they can start to be used. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-07-01xfs: convert internal buffer functions to pass mapsDave Chinner
While the external interface currently uses separate blockno/length variables, we need to move internal interfaces to passing and parsing vector maps. This will then allow us to add external interfaces to support discontiguous buffer maps as the internal code will already support them. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-07-01xfs: separate buffer indexing from block mapDave Chinner
To support discontiguous buffers in the buffer cache, we need to separate the cache index variables from the I/O map. While this is currently a 1:1 mapping, discontiguous buffer support will break this relationship. However, for caching purposes, we can still treat them the same as a contiguous buffer - the block number of the first block and the length of the buffer - as that is still a unique representation. Also, the only way we will ever access the discontiguous regions of buffers is via bulding the complete buffer in the first place, so using the initial block number and entire buffer length is a sane way to index the buffers. Add a block mapping vector construct to the xfs_buf and use it in the places where we are doing IO instead of the current b_bn/b_length variables. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-07-01xfs: struct xfs_buf_log_format isn't variable sized.Dave Chinner
The struct xfs_buf_log_format wants to think the dirty bitmap is variable sized. In fact, it is variable size on disk simply due to the way we map it from the in-memory structure, but we still just use a fixed size memory allocation for the in-memory structure. Hence it makes no sense to set the function up as a variable sized structure when we already know it's maximum size, and we always allocate it as such. Simplify the structure by making the dirty bitmap a fixed sized array and just using the size of the structure for the allocation size. This will make it much simpler to allocate and manipulate an array of format structures for discontiguous buffer support. The previous struct xfs_buf_log_item size according to /proc/slabinfo was 224 bytes. pahole doesn't give the same size because of the variable size definition. With this modification, pahole reports the same as /proc/slabinfo: /* size: 224, cachelines: 4, members: 6 */ Because the xfs_buf_log_item size is now determined by the maximum supported block size we introduce a dependency on xfs_alloc_btree.h. Avoid this dependency by moving the idefines for the maximum block sizes supported to xfs_types.h with all the other max/min type defines to avoid any new dependencies. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-06-21xfs: remove xlog_t typedefMark Tinguely
Remove the xlog_t type definitions. Signed-off-by: Mark Tinguely <tinguely@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-06-21xfs: rename log structure to xlogMark Tinguely
Rename the XFS log structure to xlog to help crash distinquish it from the other logs in Linux. Signed-off-by: Mark Tinguely <tinguely@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-06-21xfs: shutdown xfs_sync_worker before the logBen Myers
Revert commit 1307bbd, which uses the s_umount semaphore to provide exclusion between xfs_sync_worker and unmount, in favor of shutting down the sync worker before freeing the log in xfs_log_unmount. This is a cleaner way of resolving the race between xfs_sync_worker and unmount than using s_umount. Signed-off-by: Ben Myers <bpm@sgi.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2012-06-21xfs: Fix overallocation in xfs_buf_allocate_memory()Jan Kara
Commit de1cbee which removed b_file_offset in favor of b_bn introduced a bug causing xfs_buf_allocate_memory() to overestimate the number of necessary pages. The problem is that xfs_buf_alloc() sets b_bn to -1 and thus effectively every buffer is straddling a page boundary which causes xfs_buf_allocate_memory() to allocate two pages and use vmalloc() for access which is unnecessary. Dave says xfs_buf_alloc() doesn't need to set b_bn to -1 anymore since the buffer is inserted into the cache only after being fully initialized now. So just make xfs_buf_alloc() fill in proper block number from the beginning. CC: David Chinner <dchinner@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-06-21xfs: fix allocbt cursor leak in xfs_alloc_ag_vextent_nearDave Chinner
When we fail to find an matching extent near the requested extent specification during a left-right distance search in xfs_alloc_ag_vextent_near, we fail to free the original cursor that we used to look up the XFS_BTNUM_CNT tree and hence leak it. Reported-by: Chris J Arges <chris.j.arges@canonical.com> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-06-21xfs: check for stale inode before acquiring iflock on pushBrian Foster
An inode in the AIL can be flush locked and marked stale if a cluster free transaction occurs at the right time. The inode item is then marked as flushing, which causes xfsaild to spin and leaves the filesystem stalled. This is reproduced by running xfstests 273 in a loop for an extended period of time. Check for stale inodes before the flush lock. This marks the inode as pinned, leads to a log flush and allows the filesystem to proceed. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-06-21xfs: rename log structure to xlogMark Tinguely
Rename the XFS log structure to xlog to help crash distinquish it from the other logs in Linux. Signed-off-by: Mark Tinguely <tinguely@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>