| Age | Commit message (Collapse) | Author |
|---|
|
Opencode the xfs_iomap code in it's two callers. The overlap of
passed flags already was minimal and will be further reduced in the
next patch.
As a side effect the BMAPI_* flags for xfs_bmapi and the IO_* flags
for I/O end processing are merged into a single set of flags, which
should be a bit more descriptive of the operation we perform.
Also improve the tracing by giving each caller it's own type set of
tracepoints.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
Remove passing the BMAPI_* flags to these helpers, in
xfs_iomap_write_direct the check BMAPI_DIRECT was always true, and
in the xfs_iomap_write_delay path is was never checked at all.
Remove the nmap return value as we never make use of it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
Don't trylock the buffer. We are the only one ever locking it for a
regular file address space, and trylock was only copied from the
generic code which did it due to the old buffer based writeout in
jbd. Also make sure to only write out the buffer if the iomap
actually is valid, because we wouldn't have a proper mapping
otherwise. In practice we will never get an invalid mapping here as
the page lock guarantees truncate doesn't race with us, but better
be safe than sorry. Also make sure we allocate a new ioend when
crossing boundaries between mappings, just like we do for delalloc
and unwritten extents. Again this currently doesn't matter as the
I/O end handler only cares for the boundaries for unwritten extents,
but this makes the code fully correct and the same as for
delalloc/unwritten extents.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
We'll never have BIO_EOPNOTSUPP set after calling submit_bio as this
can only happen for discards, and used to happen for barriers, none
of which is every submitted by xfs_submit_ioend_bio. Also remove
the loop around bio_alloc as it will never fail due to it's mempool
backing.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
Currently we only refuse a "read-only" mapping for writing out
unwritten and delayed buffers, and refuse any other for overwrites.
Improve the checks to require delalloc mappings for delayed buffers,
and unwritten extent mappings for unwritten extents.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
Dispatch to a different helper for phase1 vs phase2 in
xlog_recover_commit_trans instead of doing it in all the
low-level functions.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
Merge the call to xlog_recover_reorder_trans and the loop over the
recovery items from xlog_recover_do_trans into xlog_recover_commit_trans,
and keep the switch statement over the log item types as a separate helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
XFS used to support different types of buffer log items long time
ago. Remove the switch statements checking the log item type in
various buffer recovery helpers that were left over from those days
and the rather useless xlog_recover_do_buffer_pass2 wrapper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
We now support mounting and using filesystems with 64-bit inodes
even when not mounted with the inode64 option (which now only
controls if we allocate new inodes in that space or not). Make sure
we always use large NFS file handles when exporting a filesystem
that may contain 64-bit inodes. Note that this only affects newly
generated file handles, any outstanding 32-bit file handle is still
accepted.
[hch: the comment and commit log are mine, the rest is from a patch
snipplet from Samuel]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc into for-2.6.38/core
|
|
After recent blkdev_get() modifications, open_by_devnum() and
open_bdev_exclusive() are simple wrappers around blkdev_get().
Replace them with blkdev_get_by_dev() and blkdev_get_by_path().
blkdev_get_by_dev() is identical to open_by_devnum().
blkdev_get_by_path() is slightly different in that it doesn't
automatically add %FMODE_EXCL to @mode.
All users are converted. Most conversions are mechanical and don't
introduce any behavior difference. There are several exceptions.
* btrfs now sets FMODE_EXCL in btrfs_device->mode, so there's no
reason to OR it explicitly on blkdev_put().
* gfs2, nilfs2 and the generic mount_bdev() now set FMODE_EXCL in
sb->s_mode.
* With the above changes, sb->s_mode now always should contain
FMODE_EXCL. WARN_ON_ONCE() added to kill_block_super() to detect
errors.
The new blkdev_get_*() functions are with proper docbook comments.
While at it, add function description to blkdev_get() too.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Joern Engel <joern@lazybastard.org>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Jan Kara <jack@suse.cz>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp>
Cc: reiserfs-devel@vger.kernel.org
Cc: xfs-masters@oss.sgi.com
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
|
|
Over time, block layer has accumulated a set of APIs dealing with bdev
open, close, claim and release.
* blkdev_get/put() are the primary open and close functions.
* bd_claim/release() deal with exclusive open.
* open/close_bdev_exclusive() are combination of open and claim and
the other way around, respectively.
* bd_link/unlink_disk_holder() to create and remove holder/slave
symlinks.
* open_by_devnum() wraps bdget() + blkdev_get().
The interface is a bit confusing and the decoupling of open and claim
makes it impossible to properly guarantee exclusive access as
in-kernel open + claim sequence can disturb the existing exclusive
open even before the block layer knows the current open if for another
exclusive access. Reorganize the interface such that,
* blkdev_get() is extended to include exclusive access management.
@holder argument is added and, if is @FMODE_EXCL specified, it will
gain exclusive access atomically w.r.t. other exclusive accesses.
* blkdev_put() is similarly extended. It now takes @mode argument and
if @FMODE_EXCL is set, it releases an exclusive access. Also, when
the last exclusive claim is released, the holder/slave symlinks are
removed automatically.
* bd_claim/release() and close_bdev_exclusive() are no longer
necessary and either made static or removed.
* bd_link_disk_holder() remains the same but bd_unlink_disk_holder()
is no longer necessary and removed.
* open_bdev_exclusive() becomes a simple wrapper around lookup_bdev()
and blkdev_get(). It also has an unexpected extra bdev_read_only()
test which probably should be moved into blkdev_get().
* open_by_devnum() is modified to take @holder argument and pass it to
blkdev_get().
Most of bdev open/close operations are unified into blkdev_get/put()
and most exclusive accesses are tested atomically at the open time (as
it should). This cleans up code and removes some, both valid and
invalid, but unnecessary all the same, corner cases.
open_bdev_exclusive() and open_by_devnum() can use further cleanup -
rename to blkdev_get_by_path() and blkdev_get_by_devt() and drop
special features. Well, let's leave them for another day.
Most conversions are straight-forward. drbd conversion is a bit more
involved as there was some reordering, but the logic should stay the
same.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Neil Brown <neilb@suse.de>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Peter Osterlund <petero2@telia.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <joel.becker@oracle.com>
Cc: Alex Elder <aelder@sgi.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: dm-devel@redhat.com
Cc: drbd-dev@lists.linbit.com
Cc: Leo Chen <leochen@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Cc: Joern Engel <joern@logfs.org>
Cc: reiserfs-devel@vger.kernel.org
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
|
|
In commit 20cb52ebd1b5ca6fa8a5d9b6b1392292f5ca8a45, titled
"xfs: simplify xfs_vm_writepage" I added an assert that any !mapped and
uptodate buffers are not dirty. That asserts turns out to trigger a lot
when running fsx on filesystems with small block sizes. The reason for
that is that the assert is simply incorrect. !mapped and uptodate
just mean this buffer covers a hole, and whenever we do a set_page_dirty
we mark all blocks in the page dirty, no matter if they have data or
not. So remove the assert, and update the comment above the condition
to match reality.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
XFS does not need it's inodes to actuall be hashed in the VFS inode
cache, but we require the inode to be marked hashed for the
writeback code to work.
Insted of using insert_inode_hash, which requires a second
inode_lock roundtrip after the partial merge of the inode
scalability patches in 2.6.37-rc simply use the new hlist_add_fake
helper to mark it hashed without requiring a lock or touching a
global cache line.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
Andi Kleen reported that gcc-4.5 gives lots of warnings for him
inside the XFS code. It turned out most of them are due to the
quota stubs beeing macros, and gcc now complaining about macros
evaluating to 0 that are not assigned to variables.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
The filestreams code may take the iolock on the parent inode while
holding it on a child. This is the only place in XFS where we take
both the child and parent iolock, so just telling lockdep about it
is enough. The lock flag required for that was already added as
part of the ilock lockdep annotations and unused so far.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
The delayed write buffer split trace currently issues a trace for
every buffer it scans. These buffers are not necessarily queued for
delayed write. Indeed, when buffers are pinned, there can be
thousands of traces of buffers that aren't actually queued for
delayed write and the ones that are are lost in the noise. Move the
trace point to record only buffers that are split out for IO to be
issued on.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
The walk fails to decrement the per-ag reference count when the
non-blocking walk fails to obtain the per-ag reclaim lock, leading
to an assert failure on debug kernels when unmounting a filesystem.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
al_hreq is copied from userland. If al_hreq.buflen is not properly aligned
then xfs_attr_list will ignore the last bytes of kbuf. These bytes are
unitialized. It leads to leaking of contents of kernel stack memory.
Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
We promised to do this for 2.6.37, and the code looks stable enough to
keep that promise.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
"gadget", "through", "command", "maintain", "maintain", "controller", "address",
"between", "initiali[zs]e", "instead", "function", "select", "already",
"equal", "access", "management", "hierarchy", "registration", "interest",
"relative", "memory", "offset", "already",
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
... and switch of the obvious get_sb_bdev() users to ->mount()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: (24 commits)
quota: Fix possible oops in __dquot_initialize()
ext3: Update kernel-doc comments
jbd/2: fixed typos
ext2: fixed typo.
ext3: Fix debug messages in ext3_group_extend()
jbd: Convert atomic_inc() to get_bh()
ext3: Remove misplaced BUFFER_TRACE() in ext3_truncate()
jbd: Fix debug message in do_get_write_access()
jbd: Check return value of __getblk()
ext3: Use DIV_ROUND_UP() on group desc block counting
ext3: Return proper error code on ext3_fill_super()
ext3: Remove unnecessary casts on bh->b_data
ext3: Cleanup ext3_setup_super()
quota: Fix issuing of warnings from dquot_transfer
quota: fix dquot_disable vs dquot_transfer race v2
jbd: Convert bitops to buffer fns
ext3/jbd: Avoid WARN() messages when failing to write the superblock
jbd: Use offset_in_page() instead of manual calculation
jbd: Remove unnecessary goto statement
jbd: Use printk_ratelimited() in journal_alloc_journal_head()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (52 commits)
split invalidate_inodes()
fs: skip I_FREEING inodes in writeback_sb_inodes
fs: fold invalidate_list into invalidate_inodes
fs: do not drop inode_lock in dispose_list
fs: inode split IO and LRU lists
fs: switch bdev inode bdi's correctly
fs: fix buffer invalidation in invalidate_list
fsnotify: use dget_parent
smbfs: use dget_parent
exportfs: use dget_parent
fs: use RCU read side protection in d_validate
fs: clean up dentry lru modification
fs: split __shrink_dcache_sb
fs: improve DCACHE_REFERENCED usage
fs: use percpu counter for nr_dentry and nr_dentry_unused
fs: simplify __d_free
fs: take dcache_lock inside __d_path
fs: do not assign default i_ino in new_inode
fs: introduce a per-cpu last_ino allocator
new helper: ihold()
...
|
|
This removes more dead code that was somehow missed by commit 0d99519efef
(writeback: remove unused nonblocking and congestion checks). There are
no behavior change except for the removal of two entries from one of the
ext4 tracing interface.
The nonblocking checks in ->writepages are no longer used because the
flusher now prefer to block on get_request_wait() than to skip inodes on
IO congestion. The latter will lead to more seeky IO.
The nonblocking checks in ->writepage are no longer used because it's
redundant with the WB_SYNC_NONE check.
We no long set ->nonblocking in VM page out and page migration, because
a) it's effectively redundant with WB_SYNC_NONE in current code
b) it's old semantic of "Don't get stuck on request queues" is mis-behavior:
that would skip some dirty inodes on congestion and page out others, which
is unfair in terms of LRU age.
Inspired by Christoph Hellwig. Thanks!
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: David Howells <dhowells@redhat.com>
Cc: Sage Weil <sage@newdream.net>
Cc: Steve French <sfrench@samba.org>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Instead of always assigning an increasing inode number in new_inode
move the call to assign it into those callers that actually need it.
For now callers that need it is estimated conservatively, that is
the call is added to all filesystems that do not assign an i_ino
by themselves. For a few more filesystems we can avoid assigning
any inode number given that they aren't user visible, and for others
it could be done lazily when an inode number is actually needed,
but that's left for later patches.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Clones an existing reference to inode; caller must already hold one.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Split up inode_add_to_list/__inode_add_to_list. Locking for the two
lists will be split soon so these helpers really don't buy us much
anymore.
The __ prefixes for the sb list helpers will go away soon, but until
inode_lock is gone we'll need them to distinguish between the locked
and unlocked variants.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
__block_write_begin and block_prepare_write are identical except for slightly
different calling conventions. Convert all callers to the __block_write_begin
calling conventions and drop block_prepare_write.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
* 'for-linus' of git://oss.sgi.com/xfs/xfs: (36 commits)
xfs: semaphore cleanup
xfs: Extend project quotas to support 32bit project ids
xfs: remove xfs_buf wrappers
xfs: remove xfs_cred.h
xfs: remove xfs_globals.h
xfs: remove xfs_version.h
xfs: remove xfs_refcache.h
xfs: fix the xfs_trans_committed
xfs: remove unused t_callback field in struct xfs_trans
xfs: fix bogus m_maxagi check in xfs_iget
xfs: do not use xfs_mod_incore_sb_batch for per-cpu counters
xfs: do not use xfs_mod_incore_sb for per-cpu counters
xfs: remove XFS_MOUNT_NO_PERCPU_SB
xfs: pack xfs_buf structure more tightly
xfs: convert buffer cache hash to rbtree
xfs: serialise inode reclaim within an AG
xfs: batch inode reclaim lookup
xfs: implement batched inode lookups for AG walking
xfs: split out inode walk inode grabbing
xfs: split inode AG walking into separate code for reclaim
...
|
|
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: remove in_workqueue_context()
workqueue: Clarify that schedule_on_each_cpu is synchronous
memory_hotplug: drop spurious calls to flush_scheduled_work()
shpchp: update workqueue usage
pciehp: update workqueue usage
isdn/eicon: don't call flush_scheduled_work() from diva_os_remove_soft_isr()
workqueue: add and use WQ_MEM_RECLAIM flag
workqueue: fix HIGHPRI handling in keep_working()
workqueue: add queue_work and activate_work trace points
workqueue: prepare for more tracepoints
workqueue: implement flush[_delayed]_work_sync()
workqueue: factor out start_flush_work()
workqueue: cleanup flush/cancel functions
workqueue: implement alloc_ordered_workqueue()
Fix up trivial conflict in fs/gfs2/main.c as per Tejun
|
|
Conflicts:
block/blk-core.c
drivers/block/loop.c
mm/swapfile.c
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
|
|
Get rid of init_MUTEX[_LOCKED]() and use sema_init() instead.
(Ported to current XFS code by <aelder@sgi.com>.)
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
This patch adds support for 32bit project quota identifiers.
On disk format is backward compatible with 16bit projid numbers. projid
on disk is now kept in two 16bit values - di_projid_lo (which holds the
same position as old 16bit projid value) and new di_projid_hi (takes
existing padding) and converts from/to 32bit value on the fly.
xfs_admin (for existing fs), mkfs.xfs (for new fs) needs to be used
to enable PROJID32BIT support.
Signed-off-by: Arkadiusz Miśkiewicz <arekm@maven.pl>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
Stop having two different names for many buffer functions and use
the more descriptive xfs_buf_* names directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
We're not actually passing around credentials inside XFS for a while
now, so remove all xfs_cred.h with it's cred_t typedef and all
instances of it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
This header only provides one extern that isn't actually declared
anywhere, and shadowed by a macro.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
It used to have a place when it contained an automatically generated
CVS version, but these days it's entirely superflous.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
This header has been completely unused for a couple of years.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
Use the correct prototype for xfs_trans_committed instead of casting it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
These days inode64 should only control which AGs we allocate new
inodes from, while we still try to support reading all existing
inodes. To make this actually work the check ontop of xfs_iget
needs to be relaxed to allow inodes in all allocation groups instead
of just those that we allow allocating inodes from. Note that we
can't simply remove the check - it prevents us from accessing
invalid data when fed invalid inode numbers from NFS or bulkstat.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
Update the per-cpu counters manually in xfs_trans_unreserve_and_mod_sb
and remove support for per-cpu counters from xfs_mod_incore_sb_batch
to simplify it. And added benefit is that we don't have to take
m_sb_lock for transactions that only modify per-cpu counters.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
Export xfs_icsb_modify_counters and always use it for modifying
the per-cpu counters. Remove support for per-cpu counters from
xfs_mod_incore_sb to simplify it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
Fail the mount if we can't allocate memory for the per-CPU counters.
This is consistent with how we handle everything else in the mount
path and makes the superblock counter modification a lot simpler.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
|
|
pahole reports the struct xfs_buf has quite a few holes in it, so
packing the structure better will reduce the size of it by 16 bytes.
Also, move all the fields used in cache lookups into the first
cacheline.
Before on x86_64:
/* size: 320, cachelines: 5 */
/* sum members: 298, holes: 6, sum holes: 22 */
After on x86_64:
/* size: 304, cachelines: 5 */
/* padding: 6 */
/* last cacheline: 48 bytes */
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
|
|
The buffer cache hash is showing typical hash scalability problems.
In large scale testing the number of cached items growing far larger
than the hash can efficiently handle. Hence we need to move to a
self-scaling cache indexing mechanism.
I have selected rbtrees for indexing becuse they can have O(log n)
search scalability, and insert and remove cost is not excessive,
even on large trees. Hence we should be able to cache large numbers
of buffers without incurring the excessive cache miss search
penalties that the hash is imposing on us.
To ensure we still have parallel access to the cache, we need
multiple trees. Rather than hashing the buffers by disk address to
select a tree, it seems more sensible to separate trees by typical
access patterns. Most operations use buffers from within a single AG
at a time, so rather than searching lots of different lists,
separate the buffer indexes out into per-AG rbtrees. This means that
searches during metadata operation have a much higher chance of
hitting cache resident nodes, and that updates of the tree are less
likely to disturb trees being accessed on other CPUs doing
independent operations.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
|
|
Memory reclaim via shrinkers has a terrible habit of having N+M
concurrent shrinker executions (N = num CPUs, M = num kswapds) all
trying to shrink the same cache. When the cache they are all working
on is protected by a single spinlock, massive contention an
slowdowns occur.
Wrap the per-ag inode caches with a reclaim mutex to serialise
reclaim access to the AG. This will block concurrent reclaim in each
AG but still allow reclaim to scan multiple AGs concurrently. Allow
shrinkers to move on to the next AG if it can't get the lock, and if
we can't get any AG, then start blocking on locks.
To prevent reclaimers from continually scanning the same inodes in
each AG, add a cursor that tracks where the last reclaim got up to
and start from that point on the next reclaim. This should avoid
only ever scanning a small number of inodes at the satart of each AG
and not making progress. If we have a non-shrinker based reclaim
pass, ignore the cursor and reset it to zero once we are done.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Alex Elder <aelder@sgi.com>
|
|
Batch and optimise the per-ag inode lookup for reclaim to minimise
scanning overhead. This involves gang lookups on the radix trees to
get multiple inodes during each tree walk, and tighter validation of
what inodes can be reclaimed without blocking befor we take any
locks.
This is based on ideas suggested in a proof-of-concept patch
posted by Nick Piggin.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
|
