summaryrefslogtreecommitdiffstats
path: root/fs
AgeCommit message (Collapse)Author
2009-02-06eCryptfs: Regression in unencrypted filename symlinksTyler Hicks
The addition of filename encryption caused a regression in unencrypted filename symlink support. ecryptfs_copy_filename() is used when dealing with unencrypted filenames and it reported that the new, copied filename was a character longer than it should have been. This caused the return value of readlink() to count the NULL byte of the symlink target. Most applications don't care about the extra NULL byte, but a version control system (bzr) helped in discovering the bug. Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-06Merge branch 'to-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland * 'to-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland: elf core dump: fix get_user use
2009-02-06elf core dump: fix get_user useRoland McGrath
The elf_core_dump() code does its work with set_fs(KERNEL_DS) in force, so vma_dump_size() needs to switch back with set_fs(USER_DS) to safely use get_user() for a normal user-space address. Checking for VM_READ optimizes out the case where get_user() would fail anyway. The vm_file check here was already superfluous given the control flow earlier in the function, so that is a cleanup/optimization unrelated to other changes but an obvious and trivial one. Reported-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Roland McGrath <roland@redhat.com>
2009-02-06vfs: Don't call attach_nobh_buffers() with an empty listDave Kleikamp
This is a modification of a patch by Bill Pemberton <wfp5p@virginia.edu> nobh_write_end() could call attach_nobh_buffers() with head == NULL. This would result in a trap when attach_nobh_buffers() attempted to access bh->b_this_page. This can be illustrated by running the writev01 testcase from LTP on jfs. This error was introduced by commit 5b41e74a "vfs: fix data leak in nobh_write_end()". That patch did not take into account that if PageMappedToDisk() is true upon entry to nobh_write_begin(), then no buffers will be allocated for the page. In that case, we won't have to worry about a failed write leaving unitialized data in the page. Of course, head != NULL implies !page_has_buffers(page), so no need to test both. Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Dmitri Monakhov <dmonakhov@openvz.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-05braino in sg_ioctl_trans()Al Viro
... and yes, gcc is insane enough to eat that without complaint. We probably want sparse to scream on those... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-05Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2 * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: Revert "configfs: Silence lockdep on mkdir(), rmdir() and configfs_depend_item()"
2009-02-05seq_file: fix big-enough lseek() + read()Alexey Dobriyan
lseek() further than length of the file will leave stale ->index (second-to-last during iteration). Next seq_read() will not notice that ->f_pos is big enough to return 0, but will print last item as if ->f_pos is pointing to it. Introduced in commit cb510b8172602a66467f3551b4be1911f5a7c8c2 aka "seq_file: more atomicity in traverse()". Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-05seq_file: move traverse so it can be used from seq_readEric Biederman
In 2.6.25 some /proc files were converted to use the seq_file infrastructure. But seq_files do not correctly support pread(), which broke some usersapce applications. To handle pread correctly we can't assume that f_pos is where we left it in seq_read. So move traverse() so that we can eventually use it in seq_read and do thus some day support pread(). Signed-off-by: Eric Biederman <ebiederm@xmission.com> Cc: Paul Turner <pjt@google.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-04Revert "configfs: Silence lockdep on mkdir(), rmdir() and ↵Mark Fasheh
configfs_depend_item()" This reverts commit 0e0333429a6280e6eb3c98845e4eed90d5f8078a. I committed this by accident - Joel and Louis are working with the lockdep maintainer to provide a better solution than just turning lockdep off. Signed-off-by: Mark Fasheh <mfasheh@suse.com> Acked-by: <Joel Becker <joel.becker@oracle.com>
2009-02-03Merge branch 'linux-next' of git://git.infradead.org/ubifs-2.6Linus Torvalds
* 'linux-next' of git://git.infradead.org/ubifs-2.6: UBIFS: remove fast unmounting UBIFS: return sensible error codes UBIFS: remount ro fixes UBIFS: spelling fix 'date' -> 'data' UBIFS: sync wbufs after syncing inodes and pages UBIFS: fix LPT out-of-space bug (again) UBIFS: fix no_chk_data_crc UBIFS: fix assertions UBIFS: ensure orphan area head is initialized UBIFS: always clean up GC LEB space UBIFS: add re-mount debugging checks UBIFS: fix LEB list freeing UBIFS: simplify locking UBIFS: document dark_wm and dead_wm better UBIFS: do not treat all data as short term UBIFS: constify operations UBIFS: do not commit twice
2009-02-03Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2 * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: ocfs2: add quota call to ocfs2_remove_btree_range() ocfs2: Wakeup the downconvert thread after a successful cancel convert ocfs2: Access the xattr bucket only before modifying it. configfs: Silence lockdep on mkdir(), rmdir() and configfs_depend_item() ocfs2: Fix possible deadlock in ocfs2_write_dquot() ocfs2: Push out dropping of dentry lock to ocfs2_wq
2009-02-03[XFS] Warn on transaction in flight on read-only remountFelix Blyakher
Till VFS can correctly support read-only remount without racing, use WARN_ON instead of BUG_ON on detecting transaction in flight after quiescing filesystem. Signed-off-by: Felix Blyakher <felixb@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2009-02-03xfs: Check buffer lengths in log recoveryDave Chinner
Before trying to obtain, read or write a buffer, check that the buffer length is actually valid. If it is not valid, then something read in the recovery process has been corrupted and we should abort recovery. Reported-by: Eric Sesterhenn <snakebyte@gmx.de> Tested-by: Eric Sesterhenn <snakebyte@gmx.de> Reviewed-by: Christoph Hellwig <hch@infradead.org> Reviewed-by: Felix Blyakher <felixb@sgi.com> Signed-off-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Felix Blyakher <felixb@sgi.com>
2009-02-03Merge branch 'master' of ↵Felix Blyakher
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into for-linus
2009-02-02ocfs2: add quota call to ocfs2_remove_btree_range()Mark Fasheh
We weren't reclaiming the clusters which get free'd from this function, so any user punching holes in a file would still have those bytes accounted against him/her. Add the call to vfs_dq_free_space_nodirty() to fix this. Interestingly enough, the journal credits calculation already took this into account. Signed-off-by: Mark Fasheh <mfasheh@suse.com> Acked-by: Jan Kara <jack@suse.cz>
2009-02-02ocfs2: Wakeup the downconvert thread after a successful cancel convertSunil Mushran
When two nodes holding PR locks on a resource concurrently attempt to upconvert the locks to EX, the master sends a BAST to one of the nodes. This message tells that node to first cancel convert the upconvert request, followed by downconvert to a NL. Only when this lock is downconverted to NL, can the master upconvert the first node's lock to EX. While the fs was doing the cancel convert, it was forgetting to wake up the dc thread after a successful cancel, leading to a deadlock. Reported-and-Tested-by: David Teigland <teigland@redhat.com> Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-02-02ocfs2: Access the xattr bucket only before modifying it.Tao Ma
In ocfs2_xattr_value_truncate, we may call b-tree codes which will extend the journal transaction. It has a potential problem that it may let the already-accessed-but-not-dirtied buffers gone. So we'd better access the bucket after we call ocfs2_xattr_value_truncate. And as for the root buffer for the xattr value, b-tree code will acess and dirty it, so we don't need to worry about it. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-02-02configfs: Silence lockdep on mkdir(), rmdir() and configfs_depend_item()Joel Becker
When attaching default groups (subdirs) of a new group (in mkdir() or in configfs_register()), configfs recursively takes inode's mutexes along the path from the parent of the new group to the default subdirs. This is needed to ensure that the VFS will not race with operations on these sub-dirs. This is safe for the following reasons: - the VFS allows one to lock first an inode and second one of its children (The lock subclasses for this pattern are respectively I_MUTEX_PARENT and I_MUTEX_CHILD); - from this rule any inode path can be recursively locked in descending order as long as it stays under a single mountpoint and does not follow symlinks. Unfortunately lockdep does not know (yet?) how to handle such recursion. I've tried to use Peter Zijlstra's lock_set_subclass() helper to upgrade i_mutexes from I_MUTEX_CHILD to I_MUTEX_PARENT when we know that we might recursively lock some of their descendant, but this usage does not seem to fit the purpose of lock_set_subclass() because it leads to several i_mutex locked with subclass I_MUTEX_PARENT by the same task. >From inside configfs it is not possible to serialize those recursive locking with a top-level one, because mkdir() and rmdir() are already called with inodes locked by the VFS. So using some mutex_lock_nest_lock() is not an option. I am proposing two solutions: 1) one that wraps recursive mutex_lock()s with lockdep_off()/lockdep_on(). 2) (as suggested earlier by Peter Zijlstra) one that puts the i_mutexes recursively locked in different classes based on their depth from the top-level config_group created. This induces an arbitrary limit (MAX_LOCK_DEPTH - 2 == 46) on the nesting of configfs default groups whenever lockdep is activated but this limit looks reasonably high. Unfortunately, this alos isolates VFS operations on configfs default groups from the others and thus lowers the chances to detect locking issues. This patch implements solution 1). Solution 2) looks better from lockdep's point of view, but fails with configfs_depend_item(). This needs to rework the locking scheme of configfs_depend_item() by removing the variable lock recursion depth, and I think that it's doable thanks to the configfs_dirent_lock. For now, let's stick to solution 1). Signed-off-by: Louis Rilling <louis.rilling@kerlabs.com> Acked-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-02-02ocfs2: Fix possible deadlock in ocfs2_write_dquot()Jan Kara
It could happen that some limit has been set via quotactl() and in parallel ->mark_dirty() is called from another thread doing e.g. dquot_alloc_space(). In such case ocfs2_write_dquot() must not try to sync the dquot because that needs global quota lock but that ranks above transaction start. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-02-02ocfs2: Push out dropping of dentry lock to ocfs2_wqJan Kara
Dropping of last reference to dentry lock is a complicated operation involving dropping of reference to inode. This can get complicated and quota code in particular needs to obtain some quota locks which leads to potential deadlock. Thus we defer dropping of inode reference to ocfs2_wq. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-30Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: Remove bogus BUG() check in ext4_bmap() ext4: Fix building with EXT4FS_DEBUG ext4: Initialize the new group descriptor when resizing the filesystem ext4: Fix ext4_free_blocks() w/o a journal when files have indirect blocks jbd2: On a __journal_expect() assertion failure printk "JBD2", not "EXT3-fs" ext3: Add sanity check to make_indexed_dir ext4: Add sanity check to make_indexed_dir ext4: only use i_size_high for regular files ext4: fix wrong use of do_div
2009-01-30Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: cfq-iosched: Allow RT requests to pre-empt ongoing BE timeslice block: add sysfs file for controlling io stats accounting Mark mandatory elevator functions in the biodoc.txt include/linux: Add bsg.h to the Kernel exported headers block: silently error an unsupported barrier bio block: Fix documentation for blkdev_issue_flush() block: add bio_rw_flagged() for testing bio->bi_rw block: seperate bio/request unplug and sync bits block: export SSD/non-rotational queue flag through sysfs Fix small typo in bio.h's documentation block: get rid of the manual directory counting in blktrace block: Allow empty integrity profile block: Remove obsolete BUG_ON block: Don't verify integrity metadata on read error
2009-01-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (29 commits) tulip: fix 21142 with 10Mbps without negotiation drivers/net/skfp: if !capable(CAP_NET_ADMIN): inverted logic gianfar: Fix Wake-on-LAN support smsc911x: timeout reaches -1 smsc9420: fix interrupt signalling test failures ucc_geth: Change uec phy id to the same format as gianfar's wimax: fix build issue when debugfs is disabled netxen: fix memory leak in drivers/net/netxen_nic_init.c tun: Add some missing TUN compat ioctl translations. ipv4: fix infinite retry loop in IP-Config net: update documentation ip aliases net: Fix OOPS in skb_seq_read(). net: Fix frag_list handling in skb_seq_read netxen: revert jumbo ringsize ath5k: fix locking in ath5k_config cfg80211: print correct intersected regulatory domain cfg80211: Fix sanity check on 5 GHz when processing country IE iwlwifi: fix kernel oops when ucode DMA memory allocation failure rtl8187: Fix error in setting OFDM power settings for RTL8187L mac80211: remove Michael Wu as maintainer ...
2009-01-30block: Remove obsolete BUG_ONMartin K. Petersen
Now that bio_vecs are no longer cleared in bvec_alloc_bs() the following BUG_ON must go. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-01-30block: Don't verify integrity metadata on read errorMartin K. Petersen
If we get an I/O error on a read request there is no point in doing a verify pass on the integrity buffer. Adjust the completion path accordingly. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-01-30ext4: Remove bogus BUG() check in ext4_bmap()Theodore Ts'o
The code to support journal-less ext4 operation added a BUG to ext4_bmap() which fired if there was no journal and the EXT4_STATE_JDATA bit was set in the i_state field. This caused running the filefrag program (which uses the FIMBAP ioctl) to trigger a BUG(). The EXT4_STATE_JDATA bit is only used for ext4_bmap(), and it's harmless for the bit to be set. We could add a check in __ext4_journalled_writepage() and ext4_journalled_write_end() to only set the EXT4_STATE_JDATA bit if the journal is present, but that adds an extra test and jump instruction. It's easier to simply remove the BUG check. http://bugzilla.kernel.org/show_bug.cgi?id=12568 Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org
2009-01-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: cifs: make sure we allocate enough storage for socket address [CIFS] Make socket retry timeouts consistent between blocking and nonblocking cases [CIFS] some cleanup to dir.c prior to addition of posix_open [CIFS] revalidate parent inode when rmdir done within that directory [CIFS] Rename md5 functions to avoid collision with new rt modules cifs: turn smb_send into a wrapper around smb_sendv
2009-01-29epoll: drop max_user_instances and rely only on max_user_watchesDavide Libenzi
Linus suggested to put limits where the money is, and max_user_watches already does that w/out the need of max_user_instances. That has the advantage to mitigate the potential DoS while allowing pretty generous default behavior. Allowing top 4% of low memory (per user) to be allocated in epoll watches, we have: LOMEM MAX_WATCHES (per user) 512MB ~178000 1GB ~356000 2GB ~712000 A box with 512MB of lomem, will meet some challenge in hitting 180K watches, socket buffers math teaches us. No more max_user_instances limits then. Signed-off-by: Davide Libenzi <davidel@xmailserver.org> Cc: Willy Tarreau <w@1wt.eu> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Cc: Bron Gondwana <brong@fastmail.fm> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-29tun: Add some missing TUN compat ioctl translations.David S. Miller
Based upon a report from Michael Tokarev <mjt@tls.msk.ru>: Just saw in dmesg: ioctl32(kvm:4408): Unknown cmd fd(9) cmd(800454cf){t:'T';sz:4} arg(ffc668e4) on /dev/net/tun Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-29UBIFS: remove fast unmountingArtem Bityutskiy
This UBIFS feature has never worked properly, and it was a mistake to add it because we simply have no use-cases. So, lets still accept the fast_unmount mount option, but ignore it. This does not change much, because UBIFS commit in sync_fs anyway, and sync_fs is called while unmounting. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-01-29UBIFS: return sensible error codesArtem Bityutskiy
When mounting/re-mounting, UBIFS returns EINVAL even if the ENOSPC or EROFS codes are are much better, just because we have not found references to ENOSPC/EROFS in mount (2) man pages. This patch changes this behaviour and makes UBIFS return real error code, because: 1. It is just less confusing and more logical 2. mount is not described in SuSv3, so it seems to be not really well-standartized 3. we do not cover all cases, and any random undocumented in man pages error code may be returned anyway Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-01-29UBIFS: remount ro fixesAdrian Hunter
- preserve the idx_gc list - it will be needed in the same state, should UBIFS be remounted rw again - prevent remounting ro if we have switched to read only mode (due to a fatal error) Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-01-29UBIFS: spelling fix 'date' -> 'data'Adrian Hunter
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-01-29UBIFS: sync wbufs after syncing inodes and pagesAdrian Hunter
All writes go through wbufs so they must be sync'd after syncing inodes and pages. Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-01-29cifs: make sure we allocate enough storage for socket addressJeff Layton
The sockaddr declared on the stack in cifs_get_tcp_session is too small for IPv6 addresses. Change it from "struct sockaddr" to "struct sockaddr_storage" to prevent stack corruption when IPv6 is used. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-01-29[CIFS] Make socket retry timeouts consistent between blocking and ↵Steve French
nonblocking cases We have used approximately 15 second timeouts on nonblocking sends in the past, and also 15 second SMB timeout (waiting for server responses, for most request types). Now that we can do blocking tcp sends, make blocking send timeout approximately the same (15 seconds). Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-01-29[CIFS] some cleanup to dir.c prior to addition of posix_openSteve French
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-01-29[CIFS] revalidate parent inode when rmdir done within that directorySteve French
When a search is pending of a parent directory, and a child directory within it is removed, we need to reset the parent directory's time so that we don't reuse the (now stale) search results. Thanks to Gunter Kukkukk for reporting this: > got the following failure notification on irc #samba: > > A user was updating from subversion 1.4 to 1.5, where the > repository is located on a samba share (independent of > unix extensions = Yes or No). > svn 1.4 did work, 1.5 does not. > > The user did a lot of stracing of subversion - and wrote a > testapplet to simulate the failing behaviour. > I've converted the C++ source to C and added some error cases. > > When using "./testdir" on a local file system, "result2" > is always (nil) as expected - cifs vfs behaves different here! > > ./testdir /mnt/cifs/mounted/share > > returns a (failing) valid pointer. Acked-by: Dave Kleikamp <shaggy@us.ibm.com> Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-01-29[CIFS] Rename md5 functions to avoid collision with new rt modulesSteve French
When rt modules were added they (each) included their own md5 with names which collided with the existing names of cifs's md5 functions. Renaming cifs's md5 modules so we don't collide with them. > Stephen Rothwell wrote: > When CIFS is built-in (=y) and staging/rt28[67]0 =y, there are multiple > definitions of: > > build-r8250.out:(.text+0x1d8ad0): multiple definition of `MD5Init' > build-r8250.out:(.text+0x1dbb30): multiple definition of `MD5Update' > build-r8250.out:(.text+0x1db9b0): multiple definition of `MD5Final' > > all of which need to have more unique identifiers for their global > symbols (e.g., rt28_md5_init, cifs_md5_init, foo, blah, bar). > CC: Greg K-H <gregkh@suse.de> Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-01-29cifs: turn smb_send into a wrapper around smb_sendvJeff Layton
cifs: turn smb_send into a wrapper around smb_sendv Rename smb_send2 to smb_sendv to make it consistent with kernel naming conventions for functions that take a vector. There's no need to have 2 functions to handle sending SMB calls. Turn smb_send into a wrapper around smb_sendv. This also allows us to properly mark the socket as needing to be reconnected when there's a partial send from smb_send. Also, in practice we always use the address and noblocksnd flag that's attached to the TCP_Server_Info. There's no need to pass them in as separate args to smb_sendv. Signed-off-by: Jeff Layton <jlayton@redhat.com> Acked-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-01-28UBIFS: fix LPT out-of-space bug (again)Adrian Hunter
The function to traverse and dirty the LPT was still not dirtying all nodes, with the result that the LPT could run out of space. Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-01-27nfsd: only set file_lock.fl_lmops in nfsd4_lockt if a stateowner is foundJeff Layton
nfsd4_lockt does a search for a lockstateowner when building the lock struct to test. If one is found, it'll set fl_owner to it. Regardless of whether that happens, it'll also set fl_lmops. Given that this lock is basically a "lightweight" lock that's just used for checking conflicts, setting fl_lmops is probably not appropriate for it. This behavior exposed a bug in DLM's GETLK implementation where it wasn't clearing out the fields in the file_lock before filling in conflicting lock info. While we were able to fix this in DLM, it still seems pointless and dangerous to set the fl_lmops this way when we may have a NULL lockstateowner. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: J. Bruce Fields <bfields@pig.fieldses.org>
2009-01-27nfsd: fix cred leak on every rpcJ. Bruce Fields
Since override_creds() took its own reference on new, we need to release our own reference. (Note the put_cred on the return value puts the *old* value of current->creds, not the new passed-in value). Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-27nfsd: fix null dereference on error pathJ. Bruce Fields
We're forgetting to check the return value from groups_alloc(). Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-27don't reallocate sxp variable passed into xfs_swapextEric Sandeen
fixes kernel.org bugzilla 12538, xfs_fsr fails on 2.6.29-rc kernels Regression caused by 743bb4650da9e2595d6cedd01c680b5b9398c74a This was an embarrasing mistake, reallocating the sxp pointer passed in from the main ioctl switch. Signed-off-by: Eric Sandeen <sandeen@sandeen.net Reported-by: Paul Martin <pm@debian.org> Tested-by: Paul Martin <pm@debian.org> Reviewed-by: Felix Blyakher <felixb@sgi.com> Signed-off-by: Felix Blyakher <felixb@sgi.com>
2009-01-27UBIFS: fix no_chk_data_crcArtem Bityutskiy
When data CRC checking is disabled, UBIFS returns incorrect return code from the 'try_read_node()' function (0 instead of 1, which means CRC error), which make the caller re-read the data node again, but using a different code patch, so the second read is fine. Thus, we read the same node twice. And the result of this is that UBIFS is slower with no_chk_data_crc option than it is with chk_data_crc option. This patches fixes the problem. Reported-by: Reuben Dowle <Reuben.Dowle@navico.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-01-26ext4: Fix building with EXT4FS_DEBUGThadeu Lima de Souza Cascardo
When bg_free_blocks_count was renamed to bg_free_blocks_count_lo in 560671a0, its uses under EXT4FS_DEBUG were not changed to the helper ext4_free_blks_count. Another commit, 498e5f24, also did not change everything needed under EXT4FS_DEBUG, thus making it spill some warnings related to printing format. This commit fixes both issues and makes ext4 build again when EXT4FS_DEBUG is enabled. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-01-26ext4: Initialize the new group descriptor when resizing the filesystemTheodore Ts'o
Make sure all of the fields of the group descriptor are properly initialized. Previously, we allowed bg_flags field to be contain random garbage, which could trigger non-deterministic behavior, including a kernel OOPS. http://bugzilla.kernel.org/show_bug.cgi?id=12433 Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org
2009-01-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm: dlm: initialize file_lock struct in GETLK before copying conflicting lock dlm: fix plock notify callback to lockd
2009-01-26Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-quota-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-quota-2.6: ocfs2: Remove ocfs2_dquot_initialize() and ocfs2_dquot_drop() quota: Improve locking