| Age | Commit message (Collapse) | Author |
|---|
|
Configfs being based upon sysfs code, config_group_find_obj() is probably
so named because of the similar kset_find_obj() in sysfs. However,
"kobject"s in sysfs become "config_item"s in configfs, so let's call it
config_group_find_item() instead, for sake of uniformity, and make
corresponding change in the users of this function.
BTW a crucial difference between kset_find_obj and config_group_find_item
is in locking expectations. kset_find_obj does its locking by itself, but
config_group_find_item expects the *caller* to do the locking. The reason
for this: kset's have their own locks, config_group's don't but instead
rely on the subsystem mutex. And, subsystem needn't necessarily be around
when config_group_find_item() is called.
So let's state these locking semantics explicitly, and rectify the comment,
otherwise bugs could continue to occur in future, as they did in the past
(refer commit d82b8191e238 in gfs2-2.6-fixes.git).
[ I also took the opportunity to fix some bad whitespace and
double-empty lines. --Joel ]
[ Conflict in fs/dlm/config.c with commit
3168b0780d06ace875696f8a648d04d6089654e5 manually resolved. --Mark ]
Signed-off-by: Satyam Sharma <ssatyam@cse.iitk.ac.in>
Cc: David Teigland <teigland@redhat.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
|
|
fs/dlm/config.c contains a useful generic macro called __CONFIGFS_ATTR
that is similar to sysfs' __ATTR macro that makes defining attributes
easy for any user of configfs. Separate it out into configfs.h so that
other users (forthcoming in dynamic netconsole patchset) can use it too.
Signed-off-by: Satyam Sharma <ssatyam@cse.iitk.ac.in>
Cc: David Teigland <teigland@redhat.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
|
|
1. item.c:config_item_cleanup() is a private function (only called by
config_item_release() in same file). However, it is spuriously
exported in include/linux/configfs.h, so remove that export and make
it static in item.c. Also, it is no longer exported / interface
function, so no need to give comment for this function (the comment
was stating obvious thing, anyway).
2. Kernel-doc comment format does not allow empty line between end of
comment and start of function (declaration line). There were several
such spurious empty lines in item.c, so fix them.
fs/configfs/item.c | 15 +++------------
include/linux/configfs.h | 1 -
2 files changed, 3 insertions(+), 13 deletions(-)
Signed-off-by: Satyam Sharma <ssatyam@cse.iitk.ac.in>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
|
|
The attribute store/show code currently limits attributes at PAGE_SIZE.
This code comes from sysfs, where it still works that way.
However, PAGE_SIZE is not constant. A 16k attribute string works on
ia64 but not on x86. Really a subsystem shouldn't allow different
attribute sizes based on platform.
As such, limit all simple attributes to 4k. This works on all
platforms, and is consistent with all current code.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
|
|
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
[S390] vmlogrdr function annotation.
[S390] s390: rename CPU_IDLE to S390_CPU_IDLE
[S390] cio: Remove prototype for non-existing function cmf_reset().
[S390] zcrypt: fix request timeout handling
[S390] system call optimization.
[S390] dasd: Avoid compile warnings on !CONFIG_DASD_PROFILE
[S390] Remove volatile from atomic_t
[S390] Program check in diag 210 under 31 bit
[S390] Bogomips calculation for 64 bit.
[S390] smp: Merge smp_count_cpus() and smp_get_save_areas().
[S390] zcore: Fix __user annotation.
[S390] fixed cdl-format detection.
[S390] sclp: Test facility list before executing a service call.
[S390] sclp: introduce some new interfaces.
[S390] Fixed comment typo.
[S390] vmcp cleanup
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw: (57 commits)
[GFS2] Accept old format NFS filehandles
[GFS2] Small fixes to logging code
[DLM] dump more lock values
[GFS2] Remove i_mode passing from NFS File Handle
[GFS2] Obtaining no_formal_ino from directory entry
[GFS2] git-gfs2-nmw-build-fix
[GFS2] System won't suspend with GFS2 file system mounted
[GFS2] remounting w/o acl option leaves acls enabled
[GFS2] inode size inconsistency
[DLM] Telnet to port 21064 can stop all lockspaces
[GFS2] Fix gfs2_block_truncate_page err return
[GFS2] Addendum to the journaled file/unmount patch
[GFS2] Simplify multiple glock aquisition
[GFS2] assertion failure after writing to journaled file, umount
[GFS2] Use zero_user_page() in stuffed_readpage()
[GFS2] Remove bogus '\0' in rgrp.c
[GFS2] Journaled file write/unstuff bug
[DLM] don't require FS flag on all nodes
[GFS2] Fix deallocation issues
[GFS2] return conflicts for GETLK
...
|
|
* 'splice-2.6.23' of git://git.kernel.dk/data/git/linux-2.6-block:
pipe: add documentation and comments
pipe: change the ->pin() operation to ->confirm()
Remove remnants of sendfile()
xip sendfile removal
splice: completely document external interface with kerneldoc
sendfile: remove bad_sendfile() from bad_file_ops
shmem: convert to using splice instead of sendfile()
relay: use splice_to_pipe() instead of open-coding the pipe loop
pipe: allow passing around of ops private pointer
splice: divorce the splice structure/function definitions from the pipe header
splice: relay support
sendfile: convert nfsd to splice_direct_to_actor()
sendfile: convert nfs to using splice_read()
loop: convert to using splice_direct_to_actor() instead of sendfile()
splice: add void cookie to the actor data
sendfile: kill generic_file_sendfile()
sendfile: remove .sendfile from filesystems that use generic_file_sendfile()
sys_sendfile: switch to using ->splice_read, if available
vmsplice: add vmsplice-to-user support
splice: abstract out actor data
|
|
On Tue, 2007-07-10 at 10:06 +0100, Christoph Hellwig wrote:
> > -#define GFS2_LARGE_FH_SIZE 10
> > -
> > -struct gfs2_fh_obj {
> > - struct gfs2_inum_host this;
> > - u32 imode;
> > -};
> > +#define GFS2_LARGE_FH_SIZE 8
>
> Because gfs2_decode_fh only accepts file handles with GFS2_LARGE_FH_SIZE
> or GFS2_LARGE_FH_SIZE you don't accept filehandles sent out by and older
> gfs version anymore. Stale filehandles because of a new kernel version
> are a big no-no, so please add back code to handle the old filehandles
> on the decode side.
>
This should fix that problem I think since its only relating to end of
the fh we can just ignore that field in order to accept the older
format.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Wendy Cheng <wcheng@redhat.com>
|
|
CDL formated DASDs are now detected correctly even if no VOL1 label is
on the disk. This prevents possible loss of data.
Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
As per Andrew Mortons request, here's a set of documentation for
the generic pipe_buf_operations hooks, the pipe, and pipe_buffer
structures.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
The name 'pin' was badly chosen, it doesn't pin a pipe buffer
in the most commonly used sense in the kernel. So change the
name to 'confirm', after debating this issue with Hugh
Dickins a bit.
A good return from ->confirm() means that the buffer is really
there, and that the contents are good.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
There are now zero users of .sendfile() in the kernel, so kill
it from the file_operations structure and in do_sendfile().
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
This patch removes xip_file_sendfile, the sendfile implementation for
xip without replacement. Those customers that use xip on s390 are not
using sendfile() as far as we know, and so far s390 is the only platform
this could potentially be used on so far.
Having sendfile is not a popular feature for execute in place file
systems, however we have a working implementation of splice_read() based
on fs/splice.c if anyone asks for it.
At this point in time, it does not seem preferable to merge
splice_read() for xip because it causes extra maintenence effort due to
code duplication and it requires struct page behind the xip memory
segment. We'd like to get rid of that in favor of supporting flash based
embedded platforms (Monta Vista work) soon.
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
Also add fs/splice.c as a kerneldoc target with a smaller blurb that
should be expanded to better explain the overview of splice.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
do_sendfile() prefers splice over sendfile, so it should not trigger
(directly, at least).
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
relay needs this for proper consumption handling, and the network
receive support needs it as well to lookup the sk_buff on pipe
release.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
We need to move even more stuff into the header so that folks can use
the splice_to_pipe() implementation instead of open-coding a lot of
pipe knowledge (see relay implementation), so move to our own header
file finally.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
Acked-by: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
They can use generic_file_splice_read() instead. Since sys_sendfile() now
prefers that, there should be no change in behaviour.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
This patch makes sendfile prefer to use ->splice_read(), if it's
available in the file_operations structure.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
A bit of a cheat, it actually just copies the data to userspace. But
this makes the interface nice and symmetric and enables people to build
on splice, with room for future improvement in performance.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
For direct splicing (or private splicing), the output may not be a file.
So abstract out the handling into a specified actor function and put
the data in the splice_desc structure earlier, so we can build on top
of that.
This is the first step in better splice handling for drivers, and also
for implementing vmsplice _to_ user memory.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
bio_{,un}map_user no longer have any modular users.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6:
JFS: Update print_hex_dump() syntax
JFS: use print_hex_dump() rather than private dump_mem() function
JFS: Whitespace cleanup and remove some dead code
|
|
scheduler debugging core: implement /proc/sched_debug and
/proc/<PID>/sched files for scheduler debugging.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
update delay-accounting to use CFS's precise stats.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
make use of CFS's precise accounting to drive /proc/<pid>/stat statistics.
this code was co-authored by:
Balbir Singh <balbir@linux.vnet.ibm.com>
Dmitry Adamushko <dmitry.adamushko@gmail.com>
Ingo Molnar <mingo@elte.hu>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com>
|
|
remove the SleepAVG field from /proc/<pid>/status, as
with the removal of the sleep-average code this value
no longer makes sense.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
This reverts part of an earlier patch which tried to reclaim
gfs2_bufdata structures too early and resulted in a "use after free"
case (this bit from me). Also a change to not write out log headers
unless we really need to (in the case of flushing nothing we don't need
a header) from Bob.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
|
|
Add two more output fields (lkb_flags and rsb nodeid) to the new debugfs
file that dumps one lock per line. Also, dump all locks instead of just
mastered locks. Accordingly, use a suffix of _locks instead of _master.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
GFS2 has been passing i_mode within NFS File Handle. Other than the
wrong assumption that there is always room for this extra 16 bit value,
the current gfs2_get_dentry doesn't really need the i_mode to work
correctly. Note that GFS2 NFS code does go thru the same lookup code
path as direct file access route (where the mode is obtained from name
lookup) but gfs2_get_dentry() is coded for different purpose. It is not
used during lookup time. It is part of the file access procedure call.
When the call is invoked, if on-disk inode is not in-memory, it has to
be read-in. This makes i_mode passing a useless overhead.
Signed-off-by: S. Wendy Cheng <wcheng@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
GFS2 lookup code doesn't ask for inode shared glock. This implies during
in-memory inode creation for existing file, GFS2 will not disk-read in
the inode contents. This leaves no_formal_ino un-initialized during
lookup time. The un-initialized no_formal_ino is subsequently encoded
into file handle. Clients will get ESTALE error whenever it tries to
access these files.
Signed-off-by: S. Wendy Cheng <wcheng@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
The kernel threads in gfs2, namely gfs2_scand, gfs2_logd, gfs2_quotad,
gfs2_glockd, gfs2_recoverd weren't doing anything when the suspend
mechanism was trying to freeze them.
I put in calls to refrigerator() in the loops for all the daemons and
suspend works as expected.
Signed-off-by: Abhijith Das <adas@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This patch is for bugzilla bug #245663. This crosswrites a fix from
gfs1 (bz #210369) so that the mount options are reset properly upon
remount. This was tested on system trin-10.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This should have been part of the NFS patch #1 but somehow I missed it
when packaging the patches. It is not a critical issue as the others (I
hope). RHEL 5.1 31.el5 kernel runs fine without this change.
Our truncate code is chopped into two parts, one for vfs inode changes
(in vmtruncate()) and one of gfs inode (in gfs2_truncatei()). These two
operatons are, unfortunately, not atomic. So it could happens that
vmtruncate() succeeds (inode->i_size is changed) but gfs2_truncatei
fails (say kernel temporarily out of memory). This would leave gfs inode
i_di.di_size out of sync with vfs inode i_size. It will later confuse
gfs2_commit_write() if a write is issued. Last time I checked, it will
cause file corruption.
Signed-off-by: S. Wendy Cheng <wcheng@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This patch fixes Red Hat bz#245892
Opening a tcp connection from a cluster member to another cluster member
targeting the dlm port it is enough to stop every dlm operation in the cluster.
This means that GFS and rgmanager will hang.
Signed-Off-By: Patrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
Code segment inside gfs2_block_truncate_page() doesn't set the return
code correctly. This causes NFSD erroneously returns EIO back to client
with setattr procedure call (truncate error).
Signed-off-by: S. Wendy Cheng <wcheng@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This patch is an addendum to the previous journaled file/unmount patch.
It fixes a problem discovered during testing.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
There is a bug in the code which acquires multiple glocks where if the
initial out-of-order attempt fails part way though we can land up trying
to acquire the wrong number of glocks. This is part of the fix for red
hat bz #239737. The other part of the bz doesn't apply to upstream
kernels since it was fixed by:
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=d3717bdf8f08a0e1039158c8bab2c24d20f492b6
Since the out-of-order code doesn't appear to add anything to the
performance of GFS2, this patch just removed it rather than trying to
fix it. It should be much easier to see whats going on here now. In
addition, we don't allocate any memory unless we are using a lot of
glocks (which is a relatively uncommon case).
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This patch passes all my nasty tests that were causing the code to
fail under one circumstance or another. Here is a complete summary
of all changes from today's git tree, in order of appearance:
1. There are now separate variables for metadata buffer accounting.
2. Variable sd_log_num_hdrs is no longer needed, since the header
accounting is taken care of by the reserve/refund sequence.
3. Fixed a tiny grammatical problem in a comment.
4. Added a new function "calc_reserved" to calculate the reserved
log space. This isn't entirely necessary, but it has two benefits:
First, it simplifies the gfs2_log_refund function greatly.
Second, it allows for easier debugging because I could sprinkle the
code with calls to this function to make sure the accounting is
proper (by adding asserts and printks) at strategic point of the code.
5. In log_pull_tail there apparently was a kludge to fix up the
accounting based on a "pull" parameter. The buffer accounting is
now done properly, so the kludge was removed.
6. File sync operations were making a call to gfs2_log_flush that
writes another journal header. Since that header was unplanned
for (reserved) by the reserve/refund sequence, the free space had
to be decremented so that when log_pull_tail gets called, the free
space is be adjusted properly. (Did I hear you call that a kludge?
well, maybe, but a lot more justifiable than the one I removed).
7. In the gfs2_log_shutdown code, it optionally syncs the log by
specifying the PULL parameter to log_write_header. I'm not sure
this is necessary anymore. It just seems to me there could be
cases where shutdown is called while there are outstanding log
buffers.
8. In the (data)buf_lo_before_commit functions, I changed some offset
values from being calculated on the fly to being constants. That
simplified some code and we might as well let the compiler do the
calculation once rather than redoing those cycles at run time.
9. This version has my rewritten databuf_lo_add function.
This version is much more like its predecessor, buf_lo_add, which
makes it easier to understand. Again, this might not be necessary,
but it seems as if this one works as well as the previous one,
maybe even better, so I decided to leave it in.
10. In databuf_lo_before_commit, a previous data corruption problem
was caused by going off the end of the buffer. The proper solution
is to have the proper limit in place, rather than stopping earlier.
(Thus my previous attempt to fix it is wrong).
If you don't wrap the buffer, you're stopping too early and that
causes more log buffer accounting problems.
11. In lops.h there are two new (previously mentioned) constants for
figuring out the data offset for the journal buffers.
12. There are also two new functions, buf_limit and databuf_limit to
calculate how many entries will fit in the buffer.
13. In function gfs2_meta_wipe, it needs to distinguish between pinned
metadata buffers and journaled data buffers for proper journal buffer
accounting. It can't use the JDATA gfs2_inode flag because it's
sometimes passed the "real" inode and sometimes the "metadata
inode" and the inode flags will be random bits in a metadata
gfs2_inode. It needs to base its decision on which was passed in.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
As suggested by Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Robert P. J. Day <rpjday@mindspring.com>
|
|
Not sure how it slipped in, but we don't want it anyway.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This patch is for bugzilla bug 283162, which uncovered a number of
bugs pertaining to writing to files that have the journaled bit on.
These bugs happen most often when writing to the meta_fs because
the files are always journaled. So operations like gfs2_grow were
particularly vulnerable, although many of the problems could be
recreated with normal files after setting the journaled bit on.
The problems fixed are:
-GFS2 wasn't ever writing unstuffed journaled data blocks to their
in-place location on disk. Now it does.
-If you unmounted too quickly after doing IO to a journaled file,
GFS2 was crashing because you would discard a buffer whose bufdata
was still on the active items list. GFS2 now deals with this
gracefully.
-GFS2 was losing track of the bufdata for journaled data blocks,
and it wasn't getting freed, causing an error when you tried to
unmount the module. GFS2 now frees all the bufdata structures.
-There was a memory corruption occurring because GFS2 wrote
twice as many log entries for journaled buffers.
-It was occasionally trying to write journal headers in buffers
that weren't currently mapped.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
Mask off the recently added DLM_LSFL_FS flag when setting the exflags.
This way all the nodes in the lockspace aren't required to have the FS
flag set, since we later check that exflags matches among all nodes.
Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
There were two issues during deallocation of unlinked inodes. The
first was relating to the use of a "try" lock which in the case of
the inode lock wasn't trying hard enough to deallocate in all
circumstances (now changed to a normal glock) and in the case of
the iopen lock didn't wait for the demotion of the shared lock before
attempting to get the exclusive lock, and thereby sometimes (timing dependent)
not completing the deallocation when it should have done.
The second issue related to the lack of a way to invalidate dcache entries
on remote nodes (now fixed by this patch) which meant that unlinks were
taking a long time to return disk space to the fs. By adding some code to
invalidate the dcache entries across the cluster for unlinked inodes, that
is now fixed.
This patch was written jointly by Abhijith Das and Steven Whitehouse.
Signed-off-by: Abhijith Das <adas@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
We weren't returning the correct result when GETLK found a conflict,
which is indicated by userspace passing back a 1.
Signed-off-by: Abhijith Das <adas redhat com>
Signed-off-by: David Teigland <teigland redhat com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
Set the owner field in the plock info sent to userspace for GETLK.
Without this, gfs_controld won't correctly see when the GETLK from a
process matches one of the process's existing locks.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
fs/gfs2/inode.c: In function 'gfs2_lookupi':
fs/gfs2/inode.c:392: warning: 'error' may be used uninitialized in this function
Looks like a real bug to me.
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
