summaryrefslogtreecommitdiffstats
path: root/fs
AgeCommit message (Collapse)Author
2011-01-10Merge branch 'master' into for-linus-mergedAlex Elder
This merge pulls the XFS master branch into the latest Linus master. This results in a merge conflict whose best fix is not obvious. I manually fixed the conflict, in "fs/xfs/xfs_iget.c". Dave Chinner had done work that resulted in RCU freeing of inodes separate from what Nick Piggin had done, and their results differed slightly in xfs_inode_free(). The fix updates Nick's call_rcu() with the use of VFS_I(), while incorporating needed updates to some XFS inode fields implemented in Dave's series. Dave's RCU callback function has also been removed. Signed-off-by: Alex Elder <aelder@sgi.com>
2011-01-10Merge branch 'driver-core-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6 * 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: driver core: Document that device_rename() is only for networking sysfs: remove useless test from sysfs_merge_group driver-core: merge private parts of class and bus driver core: fix whitespace in class_attr_string
2011-01-11xfs: serialise unaligned direct IOsDave Chinner
When two concurrent unaligned, non-overlapping direct IOs are issued to the same block, the direct Io layer will race to zero the block. The result is that one of the concurrent IOs will overwrite data written by the other IO with zeros. This is demonstrated by the xfsqa test 240. To avoid this problem, serialise all unaligned direct IOs to an inode with a big hammer. We need a big hammer approach as we need to serialise AIO as well, so we can't just block writes on locks. Hence, the big hammer is calling xfs_ioend_wait() while holding out other unaligned direct IOs from starting. We don't bother trying to serialised aligned vs unaligned IOs as they are overlapping IO and the result of concurrent overlapping IOs is undefined - the result of either IO is a valid result so we let them race. Hence we only penalise unaligned IO, which already has a major overhead compared to aligned IO so this isn't a major problem. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Alex Elder <aelder@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2011-01-11xfs: factor common write setup codeDave Chinner
The buffered IO and direct IO write paths share a common set of checks and limiting code prior to issuing the write. Factor that into a common helper function. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Alex Elder <aelder@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2011-01-11xfs: split buffered IO write path from xfs_file_aio_writeDave Chinner
Complete the split of the different write IO paths by splitting the buffered IO write path out of xfs_file_aio_write(). This makes the different mechanisms of the write patchs easier to follow. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Alex Elder <aelder@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2011-01-11xfs: split direct IO write path from xfs_file_aio_writeDave Chinner
The current xfs_file_aio_write code is a mess of locking shenanigans to handle the different locking requirements of buffered and direct IO. Start to clean this up by disentangling the direct IO path from the mess. This also removes the failed direct IO fallback path to buffered IO. XFS handles all direct IO cases without needing to fall back to buffered IO, so we can safely remove this unused path. This greatly simplifies the logic and locking needed in the write path. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2011-01-12xfs: introduce xfs_rw_lock() helpers for locking the inodeDave Chinner
We need to obtain the i_mutex, i_iolock and i_ilock during the read and write paths. Add a set of wrapper functions to neatly encapsulate the lock ordering and shared/exclusive semantics to make the locking easier to follow and get right. Note that this changes some of the exclusive locking serialisation in that serialisation will occur against the i_mutex instead of the XFS_IOLOCK_EXCL. This does not change any behaviour, and it is arguably more efficient to use the mutex for such serialisation than the rw_sem. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2011-01-11xfs: factor post-write newsize updatesDave Chinner
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Alex Elder <aelder@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2011-01-11xfs: factor common post-write isize handling codeDave Chinner
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Alex Elder <aelder@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2011-01-11xfs: ensure sync write errors are returnedDave Chinner
xfs_file_aio_write() only returns the error from synchronous flushing of the data and inode if error == 0. At the point where error is being checked, it is guaranteed to be > 0. Therefore any errors returned by the data or fsync flush will never be returned. Fix the checks so we overwrite the current error once and only if an error really occurred. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Alex Elder <aelder@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2011-01-10Merge branch 'bugfixes' into nfs-for-2.6.38Trond Myklebust
Conflicts: fs/nfs/nfs2xdr.c fs/nfs/nfs3xdr.c fs/nfs/nfs4xdr.c
2011-01-10NFS: Don't use vm_map_ram() in readdirTrond Myklebust
vm_map_ram() is not available on NOMMU platforms, and causes trouble on incoherrent architectures such as ARM when we access the page data through both the direct and the virtual mapping. The alternative is to use the direct mapping to access page data for the case when we are not crossing a page boundary, but to copy the data into a linear scratch buffer when we are accessing data that spans page boundaries. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Tested-by: Marc Kleine-Budde <mkl@pengutronix.de> Cc: stable@kernel.org [2.6.37]
2011-01-10ext2: Resolve 'dereferencing pointer to incomplete type' when enabling ↵Josh Hunt
EXT2_XATTR_DEBUG When I enable EXT2_XATTR_DEBUG in fs/ext2/xattr.c I get a build error stating the following: CC fs/ext2/xattr.o fs/ext2/xattr.c: In function 'ext2_xattr_cache_insert': fs/ext2/xattr.c:841: error: dereferencing pointer to incomplete type fs/ext2/xattr.c:846: error: dereferencing pointer to incomplete type make[2]: *** [fs/ext2/xattr.o] Error 1 make[1]: *** [fs/ext2] Error 2 make: *** [fs] Error 2 These lines reference ext2_xattr_cache->c_entry_count which is defined in struct mb_cache. struct mb_cache is currently only defined in fs/mbcache.c. Moving struct mb_cache definition to include/linux/mbcache.h to resolve the issue. Signed-off-by: Josh Hunt <johunt@akamai.com> Signed-off-by: Jan Kara <jack@suse.cz>
2011-01-10ext3: Remove redundant unlikely()Tobias Klauser
IS_ERR() already implies unlikely(), so it can be omitted here. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Jan Kara <jack@suse.cz>
2011-01-10ext2: Remove redundant unlikely()Tobias Klauser
IS_ERR() already implies unlikely(), so it can be omitted here. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Jan Kara <jack@suse.cz>
2011-01-10ext3: speed up file creates by optimizing rec_len functionsEric Sandeen
The addition of 64k block capability in the rec_len_from_disk and rec_len_to_disk functions added a bit of math overhead which slows down file create workloads needlessly when the architecture cannot even support 64k blocks, thanks to page size limits. Similar changes already exist in the ext4 codebase. The directory entry checking can also be optimized a bit by sprinkling in some unlikely() conditions to move the error handling out of line. bonnie++ sequential file creates on a 512MB ramdisk speeds up from about 77,000/s to about 82,000/s, about a 6% improvement. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz>
2011-01-10ext2: speed up file creates by optimizing rec_len functionsEric Sandeen
The addition of 64k block capability in the rec_len_from_disk and rec_len_to_disk functions added a bit of math overhead which slows down file create workloads needlessly when the architecture cannot even support 64k blocks, thanks to page size limits. The directory entry checking can also be optimized a bit by sprinkling in some unlikely() conditions to move the error handling out of line. bonnie++ sequential file creates on a 512MB ramdisk speeds up from about 2200/s to about 2500/s, about a 14% improvement. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz>
2011-01-10ext3: Add more journal error checkNamhyung Kim
Check return value of ext3_journal_get_write_acccess() and ext3_journal_dirty_metadata(). Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2011-01-10ext3: Add journal error check in resize.cNamhyung Kim
Check return value of ext3_journal_get_write_access() and ext3_journal_dirty_metadata(). Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2011-01-10quota: Use %pV and __attribute__((format (printf in __quota_error and fix ↵Joe Perches
fallout Use %pV in __quota_error so a single printk can not be interleaved with other logging messages. Add __attribute__((format (printf, 3, 4))) so format and arguments can be verified by compiler. Make sure printk formats and arguments match. Block # needed a pointer dereference. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jan Kara <jack@suse.cz>
2011-01-10ext3: Add FITRIM handlingLukas Czerner
The ioctl takes fstrim_range structure (defined in include/linux/fs.h) as an argument specifying a range of filesystem to trim and the minimum size of an continguous extent to trim. After the FITRIM is done, the number of bytes passed from the filesystem down the block stack to the device for potential discard is stored in fstrim_range.len. This number is a maximum discard amount from the storage device's perspective, because FITRIM called repeatedly will keep sending the same sectors for discard. fstrim_range.len will report the same potential discard bytes each time, but only sectors which had been written to between the discards would actually be discarded by the storage device. Further, the kernel block layer reserves the right to adjust the discard ranges to fit raid stripe geometry, non-trim capable devices in a LVM setup, etc. These reductions would not be reflected in fstrim_range.len. Thus fstrim_range.len can give the user better insight on how much storage space has potentially been released for wear-leveling, but it needs to be one of only one criteria the userspace tools take into account when trying to optimize calls to FITRIM. Thanks to Greg Freemyer <greg.freemyer@gmail.com> for better commit message. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz>
2011-01-10ext3: Add batched discard support for ext3Lukas Czerner
Walk through allocation groups and trim all free extents. It can be invoked through FITRIM ioctl on the file system. The main idea is to provide a way to trim the whole file system if needed, since some SSD's may suffer from performance loss after the whole device was filled (it does not mean that fs is full!). It search for free extents in allocation groups specified by Byte range start -> start+len. When the free extent is within this range, blocks are marked as used and then trimmed. Afterwards these blocks are marked as free in per-group bitmap. [JK: Fixed up error handling and trimming of a single group] Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Jan Kara <jack@suse.cz>
2011-01-10ext4: don't pass entire map to check_eofblocks_flEric Sandeen
Since check_eofblocks_fl() only uses the m_lblk portion of the map structure, we may as well pass that directly, rather than passing the entire map, which IMHO obfuscates what parameters check_eofblocks_fl() cares about. Not a big deal, but seems tidier and less confusing, to me. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-01-10ext4: fix memory leak in ext4_free_branchesTheodore Ts'o
Commit 40389687 moved a call to ext4_forget() out of ext4_free_branches and let ext4_free_blocks() handle calling bforget(). But that change unfortunately did not replace the call to ext4_forget() with brelse(), which was needed to drop the in-use count of the indirect block's buffer head, which lead to a memory leak when deleting files that used indirect blocks. Fix this. Thanks to Hugh Dickins for pointing this out. Cc: stable@kernel.org Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-01-10ext4: remove ext4_mb_return_to_preallocation()Theodore Ts'o
This function was never implemented, except for a BUG_ON which was tripping when ext4 is run without a journal. The problem is that although the comment asserts that "truncate (which is the only way to free block) discards all preallocations", ext4_free_blocks() is also called in various error recovery paths when blocks have been allocated, but for various reasons, we were not able to use those data blocks (for example, because we ran out of memory while trying to manipulate the extent tree, or some other similar situation). In addition to the fact that this function isn't implemented except for the incorrect BUG_ON, the single caller of this function, ext4_free_blocks(), doesn't use it all if the journal is enabled. So remove the (stub) function entirely for now. If we decide it's better to add it back, it's only going to be useful with a relatively large number of code changes anyway. Google-Bug-Id: 3236408 Cc: Jiaying Zhang <jiayingz@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-01-10ext4: flush the i_completed_io_list during ext4_truncateJiaying Zhang
Ted first found the bug when running 2.6.36 kernel with dioread_nolock mount option that xfstests #13 complained about wrong file size during fsck. However, the bug exists in the older kernels as well although it is somehow harder to trigger. The problem is that ext4_end_io_work() can happen after we have truncated an inode to a smaller size. Then when ext4_end_io_work() calls ext4_convert_unwritten_extents(), we may reallocate some blocks that have been truncated, so the inode size becomes inconsistent with the allocated blocks. The following patch flushes the i_completed_io_list during truncate to reduce the risk that some pending end_io requests are executed later and convert already truncated blocks to initialized. Note that although the fix helps reduce the problem a lot there may still be a race window between vmtruncate() and ext4_end_io_work(). The fundamental problem is that if vmtruncate() is called without either i_mutex or i_alloc_sem held, it can race with an ongoing write request so that the io_end request is processed later when the corresponding blocks have been truncated. Ted and I have discussed the problem offline and we saw a few ways to fix the race completely: a) We guarantee that i_mutex lock and i_alloc_sem write lock are both hold whenever vmtruncate() is called. The i_mutex lock prevents any new write requests from entering writeback and the i_alloc_sem prevents the race from ext4_page_mkwrite(). Currently we hold both locks if vmtruncate() is called from do_truncate(), which is probably the most common case. However, there are places where we may call vmtruncate() without holding either i_mutex or i_alloc_sem. I would like to ask for other people's opinions on what locks are expected to be held before calling vmtruncate(). There seems a disagreement among the callers of that function. b) We change the ext4 write path so that we change the extent tree to contain the newly allocated blocks and update i_size both at the same time --- when the write of the data blocks is completed. c) We add some additional locking to synchronize vmtruncate() and ext4_end_io_work(). This approach may have performance implications so we need to be careful. All of the above proposals may require more substantial changes, so we may consider to take the following patch as a bandaid. Signed-off-by: Jiaying Zhang <jiayingz@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-01-10ext4: add error checking to calls to ext4_handle_dirty_metadata()Theodore Ts'o
Call ext4_std_error() in various places when we can't bail out cleanly, so the file system can be marked as in error. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-01-10ext4: fix trimming of a single groupJan Kara
When ext4_trim_fs() is called to trim a part of a single group, the logic will wrongly set last block of the interval to 'len' instead of 'first_block + len'. Thus a shorter interval is possibly trimmed. Fix it. CC: Lukas Czerner <lczerner@redhat.com> Cc: stable@kernel.org Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-01-10ext4: fix uninitialized variable in ext4_register_li_requestAndrew Morton
fs/ext4/super.c: In function 'ext4_register_li_request': fs/ext4/super.c:2936: warning: 'ret' may be used uninitialized in this function It looks buggy to me, too. Cc: Lukas Czerner <lczerner@redhat.com> Cc: stable@kernel.org Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-01-10ext4: dynamically allocate the jbd2_inode in ext4_inode_info as necessaryTheodore Ts'o
Replace the jbd2_inode structure (which is 48 bytes) with a pointer and only allocate the jbd2_inode when it is needed --- that is, when the file system has a journal present and the inode has been opened for writing. This allows us to further slim down the ext4_inode_info structure. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-01-10ext4: drop i_state_flags on architectures with 64-bit longsTheodore Ts'o
We can store the dynamic inode state flags in the high bits of EXT4_I(inode)->i_flags, and eliminate i_state_flags. This saves 8 bytes from the size of ext4_inode_info structure, which when multiplied by the number of the number of in the inode cache, can save a lot of memory. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-01-10ext4: reorder ext4_inode_info structure elements to remove unneeded paddingTheodore Ts'o
By reordering the elements in the ext4_inode_info structure, we can reduce the padding needed on an x86_64 system by 16 bytes. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-01-10ext4: drop ec_type from the ext4_ext_cache structureTheodore Ts'o
We can encode the ec_type information by using ee_len == 0 to denote EXT4_EXT_CACHE_NO, ee_start == 0 to denote EXT4_EXT_CACHE_GAP, and if neither is true, then the cache type must be EXT4_EXT_CACHE_EXTENT. This allows us to reduce the size of ext4_ext_inode by another 8 bytes. (ec_type is 4 bytes, plus another 4 bytes of padding) Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-01-10ext4: use ext4_lblk_t instead of sector_t for logical blocksTheodore Ts'o
This fixes a number of places where we used sector_t instead of ext4_lblk_t for logical blocks, which for ext4 are still 32-bit data types. No point wasting space in the ext4_inode_info structure, and requiring 64-bit arithmetic on 32-bit systems, when it isn't necessary. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-01-10ext4: replace i_delalloc_reserved_flag with EXT4_STATE_DELALLOC_RESERVEDTheodore Ts'o
Remove the short element i_delalloc_reserved_flag from the ext4_inode_info structure and replace it a new bit in i_state_flags. Since we have an ext4_inode_info for every ext4 inode cached in the inode cache, any savings we can produce here is a very good thing from a memory utilization perspective. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-01-10ext4: fix 32bit overflow in ext4_ext_find_goal()Kazuya Mio
ext4_ext_find_goal() returns an ideal physical block number that the block allocator tries to allocate first. However, if a required file offset is smaller than the existing extent's one, ext4_ext_find_goal() returns a wrong block number because it may overflow at "block - le32_to_cpu(ex->ee_block)". This patch fixes the problem. ext4_ext_find_goal() will also return a wrong block number in case a file offset of the existing extent is too big. In this case, the ideal physical block number is fixed in ext4_mb_initialize_context(), so it's no problem. reproduce: # dd if=/dev/zero of=/mnt/mp1/tmp bs=127M count=1 oflag=sync # dd if=/dev/zero of=/mnt/mp1/file bs=512K count=1 seek=1 oflag=sync # filefrag -v /mnt/mp1/file Filesystem type is: ef53 File size of /mnt/mp1/file is 1048576 (256 blocks, blocksize 4096) ext logical physical expected length flags 0 128 67456 128 eof /mnt/mp1/file: 2 extents found # rm -rf /mnt/mp1/tmp # echo $((512*4096)) > /sys/fs/ext4/loop0/mb_stream_req # dd if=/dev/zero of=/mnt/mp1/file bs=512K count=1 oflag=sync conv=notrunc result (linux-2.6.37-rc2 + ext4 patch queue): # filefrag -v /mnt/mp1/file Filesystem type is: ef53 File size of /mnt/mp1/file is 1048576 (256 blocks, blocksize 4096) ext logical physical expected length flags 0 0 33280 128 1 128 67456 33407 128 eof /mnt/mp1/file: 2 extents found result(apply this patch): # filefrag -v /mnt/mp1/file Filesystem type is: ef53 File size of /mnt/mp1/file is 1048576 (256 blocks, blocksize 4096) ext logical physical expected length flags 0 0 66560 128 1 128 67456 66687 128 eof /mnt/mp1/file: 2 extents found Signed-off-by: Kazuya Mio <k-mio@sx.jp.nec.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-01-10ext4: add more error checks to ext4_mkdir()Namhyung Kim
Check return value of ext4_journal_get_write_access, ext4_journal_dirty_metadata and ext4_mark_inode_dirty. Move brelse() under 'out_stop' to release bh properly in case of journal error. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-01-10ext4: ext4_ext_migrate should use NULL not 0Eric Paris
ext4_ext_migrate() calls ext4_new_inode() and passes 0 instead of a pointer to a struct qstr. This patch uses NULL, to make it obvious to the caller that this was a pointer. Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-01-10ext4: Use ext4_error_file() to print the pathname to the corrupted inodeTheodore Ts'o
Where the file pointer is available, use ext4_error_file() instead of ext4_error_inode(). Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-01-10ext4: use IS_ERR() to check for errors in ext4_error_fileDan Carpenter
d_path() returns an ERR_PTR and it doesn't return NULL. This is in ext4_error_file() and no one actually calls ext4_error_file(). Signed-off-by: Dan Carpenter <error27@gmail.com>
2011-01-10ext4: test the correct variable in ext4_init_pageio()Dan Carpenter
This is a copy and paste error. The intent was to check "io_page_cachep". We tested "io_page_cachep" earlier. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-01-10ext2: remove dead code in ext2_xattr_getWang Sheng-Hui
Reviewed-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Wang Sheng-Hui <crosslonelyover@gmail.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-01-10ext2,ext3,ext4: clarify comment for extN_xattr_set_handleWang Sheng-Hui
Signed-off-by: Wang Sheng-Hui <crosslonelyover@gmail.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-01-10ext4: clean up ext4_xattr_list()'s error code checking and return strategyTheodore Ts'o
Any time you see code that tries to add error codes together, you should want to claw your eyes out... Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-01-10ext4: remove warning message from ext4_issue_discard helperLukas Czerner
ext4_issue_discard is supposed to be helper for calling discard, however in case that underlying device does not support discard it prints out the warning message and clears the DISCARD t_mount_opt flag. Since it can be (and is) used by others, it should not do anything and let the caller to handle the error case. This commit removes warning message and flag setting from ext4_issue_discard and use it just in place where it is really needed (release_blocks_on_commit). FITRIM ioctl should not set any flags nor it should print out warning messages, so get rid of the warning as well. Signed-off-by: Lukas Czerner <lczerner@redhat.com>
2011-01-10ext4: fix possible overflow in ext4_trim_fs()Lukas Czerner
When determining last group through ext4_get_group_no_and_offset() the result may be wrong in cases when range->start and range-len are too big, because it may overflow when summing up those two numbers. Fix that by checking range->len and limit its value to ext4_blocks_count(). This commit was tested by myself with expected result. Signed-off-by: Lukas Czerner <lczerner@redhat.com>
2011-01-10headers: kobject.h reduxAlexey Dobriyan
Remove kobject.h from files which don't need it, notably, sched.h and fs.h. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2: nilfs2: unfold nilfs_dat_inode function nilfs2: do not pass sbi to functions which can get it from inode nilfs2: get rid of nilfs_mount_options structure nilfs2: simplify nilfs_mdt_freeze_buffer nilfs2: get rid of loaded flag from nilfs object nilfs2: fix a checkpatch error in page.c nilfs2: fiemap support nilfs2: mark buffer heads as delayed until the data is written to disk nilfs2: call nilfs_error inside bmap routines fs/nilfs2/super.c: Use printf extension %pV MAINTAINERS: add nilfs2 git tree entry
2011-01-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: cifs: use CreationTime like an i_generation field cifs: switch cifs_open and cifs_create to use CIFSSMBUnixSetFileInfo cifs: show "acl" in DebugData Features when it's compiled in cifs: move "ntlmssp" and "local_leases" options out of experimental code cifs: replace some hardcoded values with preprocessor constants cifs: remove unnecessary locking around sequence_number [CIFS] Fix minor merge conflict in fs/cifs/dir.c CIFS: Simplify cifs_open code CIFS: Simplify non-posix open stuff (try #2) CIFS: Add match_port check during looking for an existing connection (try #4) CIFS: Simplify ipv*_connect functions into one (try #4) cifs: Support NTLM2 session security during NTLMSSP authentication [try #5] cifs: don't overwrite dentry name in d_revalidate
2011-01-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm: dlm: sanitize work_start() in lowcomms.c dlm: reduce cond_resched during send dlm: use TCP_NODELAY dlm: Use cmwq for send and receive workqueues dlm: Handle application limited situations properly.