summaryrefslogtreecommitdiffstats
path: root/fs
AgeCommit message (Collapse)Author
2013-04-21ext4: fix Kconfig documentation for CONFIG_EXT4_DEBUGTheodore Ts'o
Fox the Kconfig documentation for CONFIG_EXT4_DEBUG to match the change made by commit a0b30c1229: ext4: use module parameters instead of debugfs for mballoc_debug Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
2013-04-21ext4: fix online resizing for ext3-compat file systemsTheodore Ts'o
Commit fb0a387dcdc restricts block allocations for indirect-mapped files to block groups less than s_blockfile_groups. However, the online resizing code wasn't setting s_blockfile_groups, so the newly added block groups were not available for non-extent mapped files. Reported-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
2013-04-22f2fs: fix error return code in f2fs_fill_super()Wei Yongjun
Fix to return a negative error code from the error handling case instead of 0, as returned elsewhere in this function. Introduce by commit c0d39e(f2fs: fix return values from validate superblock) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-04-21LOCKD: Ensure that nlmclnt_block resets block->b_status after a server rebootTrond Myklebust
After a server reboot, the reclaimer thread will recover all the existing locks. For locks that are blocked, however, it will change the value of block->b_status to nlm_lck_denied_grace_period in order to signal that they need to wake up and resend the original blocking lock request. Due to a bug, however, the block->b_status never gets reset after the blocked locks have been woken up, and so the process goes into an infinite loop of resends until the blocked lock is satisfied. Reported-by: Marc Eshel <eshel@us.ibm.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@vger.kernel.org
2013-04-21jbd2: trace when lock_buffer in do_get_write_access takes a long timeTheodore Ts'o
While investigating interactivity problems it was clear that processes sometimes stall for long periods of times if an attempt is made to lock a buffer which is undergoing writeback. It would stall in a trace looking something like [<ffffffff811a39de>] __lock_buffer+0x2e/0x30 [<ffffffff8123a60f>] do_get_write_access+0x43f/0x4b0 [<ffffffff8123a7cb>] jbd2_journal_get_write_access+0x2b/0x50 [<ffffffff81220f79>] __ext4_journal_get_write_access+0x39/0x80 [<ffffffff811f3198>] ext4_reserve_inode_write+0x78/0xa0 [<ffffffff811f3209>] ext4_mark_inode_dirty+0x49/0x220 [<ffffffff811f57d1>] ext4_dirty_inode+0x41/0x60 [<ffffffff8119ac3e>] __mark_inode_dirty+0x4e/0x2d0 [<ffffffff8118b9b9>] update_time+0x79/0xc0 [<ffffffff8118ba98>] file_update_time+0x98/0x100 [<ffffffff81110ffc>] __generic_file_aio_write+0x17c/0x3b0 [<ffffffff811112aa>] generic_file_aio_write+0x7a/0xf0 [<ffffffff811ea853>] ext4_file_write+0x83/0xd0 [<ffffffff81172b23>] do_sync_write+0xa3/0xe0 [<ffffffff811731ae>] vfs_write+0xae/0x180 [<ffffffff8117361d>] sys_write+0x4d/0x90 [<ffffffff8159d62d>] system_call_fastpath+0x1a/0x1f [<ffffffffffffffff>] 0xffffffffffffffff Signed-off-by: Mel Gorman <mgorman@suse.de> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-04-21ext4: mark metadata blocks using bh flagsTheodore Ts'o
This allows metadata writebacks which are issued via block device writeback to be sent with the current write request flags. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-04-21xfs: split out symlink code into it's own file.Dave Chinner
The symlink code is about to get more complicated when CRCs are added for remote symlink blocks. The symlink management code is mostly self contained, so move it to it's own files so that all the new code and the existing symlink code will not be intermingled with other unrelated code. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-04-21xfs: add version 3 inode format with CRCsChristoph Hellwig
Add a new inode version with a larger core. The primary objective is to allow for a crc of the inode, and location information (uuid and ino) to verify it was written in the right place. We also extend it by: a creation time (for Samba); a changecount (for NFSv4); a flush sequence (in LSN format for recovery); an additional inode flags field; and some additional padding. These additional fields are not implemented yet, but already laid out in the structure. [dchinner@redhat.com] Added LSN and flags field, some factoring and rework to capture all the necessary information in the crc calculation. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-04-21xfs: add CRC checks for quota blocksChristoph Hellwig
Use the reserved space in struct xfs_dqblk to store a UUID and a crc for the quota blocks. [dchinner@redhat.com] Add a LSN field and update for current verifier infrastructure. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-04-21xfs: add CRC checks to the AGIDave Chinner
Same set of changes made to the AGF need to be made to the AGI. This patch has a similar history to the AGF, hence a similar sign-off chain. Signed-off-by: Dave Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <dgc@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-04-21xfs: add CRC checks to the AGFLChristoph Hellwig
Add CRC checks, location information and a magic number to the AGFL. Previously the AGFL was just a block containing nothing but the free block pointers. The new AGFL has a real header with the usual boilerplate instead, so that we can verify it's not corrupted and written into the right place. [dchinner@redhat.com] Added LSN field, reworked significantly to fit into new verifier structure and growfs structure, enabled full verifier functionality now there is a header to verify and we can guarantee an initialised AGFL. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-04-21xfs: add CRC checks to the AGFDave Chinner
The AGF already has some self identifying fields (e.g. the sequence number) so we only need to add the uuid to it to identify the filesystem it belongs to. The location is fixed based on the sequence number, so there's no need to add a block number, either. Hence the only additional fields are the CRC and LSN fields. These are unlogged, so place some space between the end of the logged fields and them so that future expansion of the AGF for logged fields can be placed adjacent to the existing logged fields and hence not complicate the field-derived range based logging we currently have. Based originally on a patch from myself, modified further by Christoph Hellwig and then modified again to fit into the verifier structure with additional fields by myself. The multiple signed-off-by tags indicate the age and history of this patch. Signed-off-by: Dave Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-04-21xfs: add support for large btree blocksChristoph Hellwig
Add support for larger btree blocks that contains a CRC32C checksum, a filesystem uuid and block number for detecting filesystem consistency and out of place writes. [dchinner@redhat.com] Also include an owner field to allow reverse mappings to be implemented for improved repairability and a LSN field to so that log recovery can easily determine the last modification that made it to disk for each buffer. [dchinner@redhat.com] Add buffer log format flags to indicate the type of buffer to recovery so that we don't have to do blind magic number tests to determine what the buffer is. [dchinner@redhat.com] Modified to fit into the verifier structure. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-04-21xfs: increase hexdump output in xfs_corruption_errorDave Chinner
Currently xfs_corruption_error() dumps the first 16 bytes of the buffer that is passed to it when a corruption occurs. This is not large enough to see the entire state of the header of the block that was determined to be corrupt. increase the output to 64 bytes to capture the majority of all headers in all types of metadata blocks. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-04-20buffer: add BH_Prio and BH_Meta flagsTheodore Ts'o
Add buffer_head flags so that buffer cache writebacks can be marked with the the appropriate request flags, so that metadata blocks can be marked appropriately in blktrace. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-04-20ext4: mark all metadata I/O with REQ_METATheodore Ts'o
As Dave Chinner pointed out at the 2013 LSF/MM workshop, it's important that metadata I/O requests are marked as such to avoid priority inversions caused by I/O bandwidth throttling. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-04-20Merge remote-tracking branch 'efi/chainsaw' into x86/efiH. Peter Anvin
Resolved Conflicts: drivers/firmware/efivars.c fs/efivarsfs/file.c Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-04-20NFSv4: Ensure the LOCK call cannot use the delegation stateidTrond Myklebust
Defensive patch to ensure that we copy the state->open_stateid, which can never be set to the delegation stateid. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-04-20NFSv4: Use the open stateid if the delegation has the wrong modeTrond Myklebust
Fix nfs4_select_rw_stateid() so that it chooses the open stateid (or an all-zero stateid) if the delegation does not match the selected read/write mode. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-04-19ext4: fix readdir error in case inline_data+^dir_index.Tao Ma
Zach reported a problem that if inline data is enabled, we don't tell the difference between the offset of '.' and '..'. And a getdents will fail if the user only want to get '.'. And what's worse, we may meet with duplicate dir entries as the offset for inline dir and non-inline one is quite different. This patch just try to resolve this problem if dir_index is disabled. In this case, f_pos is the real offset with the dir block, so for inline dir, we just pretend as if we are a dir block and returns the offset like a norml dir block does. Reported-by: Zach Brown <zab@redhat.com> Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-04-19ext4: fix readdir error in the case of inline_data+dir_indexTao Ma
Zach reported a problem that if inline data is enabled, we don't tell the difference between the offset of '.' and '..'. And a getdents will fail if the user only want to get '.' and what's worse, if there is a conversion happens when the user calls getdents many times, he/she may get the same entry twice. In theory, a dir block would also fail if it is converted to a hashed-index based dir since f_pos will become a hash value, not the real one, but it doesn't happen. And a deep investigation shows that we uses a hash based solution even for a normal dir if the dir_index feature is enabled. So this patch just adds a new htree_inlinedir_to_tree for inline dir, and if we find that the hash index is supported, we will do like what we do for a dir block. Reported-by: Zach Brown <zab@redhat.com> Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-04-19jbd2: use kmem_cache_zalloc instead of kmem_cache_alloc/memsetZheng Liu
The jbd2_alloc_handle() function is only called by new_handle(). So this commit uses kmem_cache_zalloc() instead of kmem_cache_alloc()/memset(). Signed-off-by: Zheng Liu <wenqing.lz@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-04-19nfs: Send atime and mtime as a 64bit valueBryan Schumaker
RFC 3530 says that the seconds value of a nfstime4 structure is a 64bit value, but we are instead sending a 32-bit 0 and then a 32bit conversion of the 64bit Linux value. This means that if we try to set atime to a value before the epoch (touch -t 196001010101) the client will only send part of the new value due to lost precision. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-04-19ext4: mext_insert_extents should update extent block checksumDarrick J. Wong
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-04-19ext4: move quota initialization out of inode allocation transactionJan Kara
Inode allocation transaction is pretty heavy (246 credits with quotas and extents before previous patch, still around 200 after it). This is mostly due to credits required for allocation of quota structures (credits there are heavily overestimated but it's difficult to make better estimates if we don't want to wire non-trivial assumptions about quota format into filesystem). So move quota initialization out of allocation transaction. That way transaction for quota structure allocation will be started only if we need to look up quota structure on disk (rare) and furthermore it will be started for each quota type separately, not for all of them at once. This reduces maximum transaction size to 34 is most cases and to 73 in the worst case. [ Modified by tytso to clean up the cleanup paths for error handling. Also use a separate call to ext4_std_error() for each failure so it is easier for someone who is debugging a problem in this function to determine which function call failed. ] Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-04-18ext4: reserve xattr index for Rich ACL supportTheodore Ts'o
Jan Kara <jack@suse.cz> SUSE is carrying out of tree patches for Rich ACL support for ext4 as they didn't get upstream due to opposition of some VFS maintainers. Reserve xattr index for Rich ACLs so that it cannot be taken by anything else which would force users to backup and reset their Rich ACLs on files. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-04-18Revert "block: add missing block_bio_complete() tracepoint"Linus Torvalds
This reverts commit 3a366e614d0837d9fc23f78cdb1a1186ebc3387f. Wanlong Gao reports that it causes a kernel panic on his machine several minutes after boot. Reverting it removes the panic. Jens says: "It's not quite clear why that is yet, so I think we should just revert the commit for 3.9 final (which I'm assuming is pretty close). The wifi is crap at the LSF hotel, so sending this email instead of queueing up a revert and pull request." Reported-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Requested-by: Jens Axboe <axboe@kernel.dk> Cc: Tejun Heo <tj@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-18fuse: truncate file if async dio failedMaxim Patlasov
The patch improves error handling in fuse_direct_IO(): if we successfully submitted several fuse requests on behalf of synchronous direct write extending file and some of them failed, let's try to do our best to clean-up. Changed in v2: reuse fuse_do_setattr(). Thanks to Brian for suggestion. Signed-off-by: Maxim Patlasov <mpatlasov@parallels.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2013-04-17hfsplus: fix potential overflow in hfsplus_file_truncate()Vyacheslav Dubeyko
Change a u32 to loff_t hfsplus_file_truncate(). Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-17fs/binfmt_elf.c: fix hugetlb memory check in vma_dump_size()Naoya Horiguchi
Documentation/filesystems/proc.txt says about coredump_filter bitmask, Note bit 0-4 doesn't effect any hugetlb memory. hugetlb memory are only effected by bit 5-6. However current code can go into the subsequent flag checks of bit 0-4 for vma(VM_HUGETLB). So this patch inserts 'return' and makes it work as written in the document. Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: David Rientjes <rientjes@google.com> Cc: <stable@vger.kernel.org> [3.7+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-17hugetlbfs: stop setting VM_DONTDUMP in initializing vma(VM_HUGETLB)Naoya Horiguchi
Currently we fail to include any data on hugepages into coredump, because VM_DONTDUMP is set on hugetlbfs's vma. This behavior was recently introduced by commit 314e51b9851b ("mm: kill vma flag VM_RESERVED and mm->reserved_vm counter"). This looks to me a serious regression, so let's fix it. Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Acked-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: David Rientjes <rientjes@google.com> Cc: <stable@vger.kernel.org> [3.7+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-17fuse: optimize short direct readsMaxim Patlasov
If user requested direct read beyond EOF, we can skip sending fuse requests for positions beyond EOF because userspace would ACK them with zero bytes read anyway. We can trust to i_size in fuse_direct_IO for such cases because it's called from fuse_file_aio_read() and the latter updates fuse attributes including i_size. Signed-off-by: Maxim Patlasov <mpatlasov@parallels.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2013-04-17fuse: enable asynchronous processing direct IOMaxim Patlasov
In case of synchronous DIO request (i.e. read(2) or write(2) for a file opened with O_DIRECT), the patch submits fuse requests asynchronously, but waits for their completions before return from fuse_direct_IO(). In case of asynchronous DIO request (i.e. libaio io_submit() or a file opened with O_DIRECT), the patch submits fuse requests asynchronously and return -EIOCBQUEUED immediately. The only special case is async DIO extending file. Here the patch falls back to old behaviour because we can't return -EIOCBQUEUED and update i_size later, without i_mutex hold. And we have no method to wait on real async I/O requests. The patch also clean __fuse_direct_write() up: it's better to update i_size in its callers. Thanks Brian for suggestion. Signed-off-by: Maxim Patlasov <mpatlasov@parallels.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2013-04-17fuse: make fuse_direct_io() aware about AIOMaxim Patlasov
The patch implements passing "struct fuse_io_priv *io" down the stack up to fuse_send_read/write where it is used to submit request asynchronously. io->async==0 designates synchronous processing. Non-trivial part of the patch is changes in fuse_direct_io(): resources like fuse requests and user pages cannot be released immediately in async case. Signed-off-by: Maxim Patlasov <mpatlasov@parallels.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2013-04-17fuse: add support of async IOMaxim Patlasov
The patch implements a framework to process an IO request asynchronously. The idea is to associate several fuse requests with a single kiocb by means of fuse_io_priv structure. The structure plays the same role for FUSE as 'struct dio' for direct-io.c. The framework is supposed to be used like this: - someone (who wants to process an IO asynchronously) allocates fuse_io_priv and initializes it setting 'async' field to non-zero value. - as soon as fuse request is filled, it can be submitted (in non-blocking way) by fuse_async_req_send() - when all submitted requests are ACKed by userspace, io->reqs drops to zero triggering aio_complete() In case of IO initiated by libaio, aio_complete() will finish processing the same way as in case of dio_complete() calling aio_complete(). But the framework may be also used for internal FUSE use when initial IO request was synchronous (from user perspective), but it's beneficial to process it asynchronously. Then the caller should wait on kiocb explicitly and aio_complete() will wake the caller up. Signed-off-by: Maxim Patlasov <mpatlasov@parallels.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2013-04-17fuse: move fuse_release_user_pages() upMaxim Patlasov
fuse_release_user_pages() will be indirectly used by fuse_send_read/write in future patches. Signed-off-by: Maxim Patlasov <mpatlasov@parallels.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2013-04-17fuse: optimize wake_upMiklos Szeredi
Normally blocked_waitq will be inactive, so optimize this case. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2013-04-17posix-timers: Show sigevent info in proc filePavel Emelyanov
Previous patch added proc file to list posix timers created by task. Expand the information provided in this file by adding info about notification method, with which timers were created. I.e. after the "ID:" line there go 1. "signal:" line, that shows signal number and sigval bits; 2. "notify:" line, that shows the timer notification method. Thus the timer entry would looke like this: ID: 123 signal: 14/0000000000b005d0 notify: signal/pid.732 This information is enough to understand how timer_create() was called for each particular timer. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Matthew Helsley <matt.helsley@gmail.com> Link: http://lkml.kernel.org/r/513DA024.80404@parallels.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-04-17posix-timers: Introduce /proc/PID/timers filePavel Emelyanov
Currently kernel doesn't provide any API for getting info about what posix timers are configured by processes. It's implied, that a process which configured some timers, knows what it did. However, for external tools it's impossible to get this information. In particular, this is critical for checkpoint-restore project to have this info. Introduce a per-pid proc file with information about posix timers. Since these timers are shared between threads, this file is present on tgid level only, no such thing in tid subdirs. The file format is expected to be the "/proc/<pid>/smaps"-like, i.e. each timer will occupy seveal lines to allow for future extending. Each new timer entry starts with the ID: <number> line which is added by this patch. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Matthew Helsley <matt.helsley@gmail.com> Link: http://lkml.kernel.org/r/513DA00D.6070009@parallels.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-04-17efi: split efisubsystem from efivarsTom Gundersen
This registers /sys/firmware/efi/{,systab,efivars/} whenever EFI is enabled and the system is booted with EFI. This allows *) userspace to check for the existence of /sys/firmware/efi as a way to determine whether or it is running on an EFI system. *) 'mount -t efivarfs none /sys/firmware/efi/efivars' without manually loading any modules. [ Also, move the efivar API into vars.c and unconditionally compile it. This allows us to move efivars.c, which now only contains the sysfs variable code, into the firmware/efi directory. Note that the efivars.c filename is kept to maintain backwards compatability with the old efivars.ko module. With this patch it is now possible for efivarfs to be built without CONFIG_EFI_VARS - Matt ] Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Mike Waychison <mikew@google.com> Cc: Kay Sievers <kay@vrfy.org> Cc: Jeremy Kerr <jk@ozlabs.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Chun-Yi Lee <jlee@suse.com> Cc: Andy Whitcroft <apw@canonical.com> Cc: Tobias Powalowski <tpowa@archlinux.org> Signed-off-by: Tom Gundersen <teg@jklm.no> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-04-17efivarfs: Move to fs/efivarfsMatt Fleming
Now that efivarfs uses the efivar API, move it out of efivars.c and into fs/efivarfs where it belongs. This move will eventually allow us to enable the efivarfs code without having to also enable CONFIG_EFI_VARS built, and vice versa. Furthermore, things like, mount -t efivarfs none /sys/firmware/efi/efivars will now work if efivarfs is built as a module without requiring the use of MODULE_ALIAS(), which would have been necessary when the efivarfs code was part of efivars.c. Cc: Matthew Garrett <matthew.garrett@nebula.com> Cc: Jeremy Kerr <jk@ozlabs.org> Reviewed-by: Tom Gundersen <teg@jklm.no> Tested-by: Tom Gundersen <teg@jklm.no> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-04-17fuse: implement exclusive wakeup for blocked_waitqMaxim Patlasov
The patch solves thundering herd problem. So far as previous patches ensured that only allocations for background may block, it's safe to wake up one waiter. Whoever it is, it will wake up another one in request_end() afterwards. Signed-off-by: Maxim Patlasov <mpatlasov@parallels.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2013-04-17fuse: skip blocking on allocations of synchronous requestsMaxim Patlasov
A task may have at most one synchronous request allocated. So these requests need not be otherwise limited. The patch re-works fuse_get_req() to follow this idea. Signed-off-by: Maxim Patlasov <mpatlasov@parallels.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2013-04-17fuse: add flag fc->initializedMaxim Patlasov
Existing flag fc->blocked is used to suspend request allocation both in case of many background request submitted and period of time before init_reply arrives from userspace. Next patch will skip blocking allocations of synchronous request (disregarding fc->blocked). This is mostly OK, but we still need to suspend allocations if init_reply is not arrived yet. The patch introduces flag fc->initialized which will serve this purpose. Signed-off-by: Maxim Patlasov <mpatlasov@parallels.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2013-04-17fuse: make request allocations for background processing explicitMaxim Patlasov
There are two types of processing requests in FUSE: synchronous (via fuse_request_send()) and asynchronous (via adding to fc->bg_queue). Fortunately, the type of processing is always known in advance, at the time of request allocation. This preparatory patch utilizes this fact making fuse_get_req() aware about the type. Next patches will use it. Signed-off-by: Maxim Patlasov <mpatlasov@parallels.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2013-04-16nfsd4: put_client_renew_locked can be staticFengguang Wu
Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2013-04-16nfsd4: remove unused macroJ. Bruce Fields
Cleanup a piece I forgot to remove in 9411b1d4c7df26dca6bc6261b5dc87a5b4c81e5c "nfsd4: cleanup handling of nfsv4.0 closed stateid's". Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2013-04-16NFSv4: Record the OPEN create mode used in the nfs4_opendata structureTrond Myklebust
If we're doing NFSv4.1 against a server that has persistent sessions, then we should not need to call SETATTR in order to reset the file attributes immediately after doing an exclusive create. Note that since the create mode depends on the type of session that has been negotiated with the server, we should not choose the mode until after we've got a session slot. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-04-16xfs: Update xfs_log_commit_cil() commentsJeff Liu
xfs_log_commit_iclog() function has been removed by commits 93b8a585: xfs: remove the deprecated nodelaylog option Beginning from Linux 3.3, only delayed logging is supported so that we call xfs_log_commit_cil() at xfs_trans_commit() only, remove the useless comments so. Signed-off-by: Jie Liu <jeff.liu@oracle.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-04-16xfs: Remove the obsolete XLOG_CIL_HARD_SPACE_LIMIT() macrosJeff Liu
There is no more users of this Macro, so it's time to kill it dead. Signed-off-by: Jie Liu <jeff.liu@oracle.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>