| Age | Commit message (Collapse) | Author |
|---|
|
This can happen quite easily, if several processes are trying to splice
the same file at the same time. It's not a failure, it just means someone
raced with us in allocating this file page. So just dump the allocated
page and relookup the original.
Signed-off-by: Jens Axboe <axboe@suse.de>
|
|
Same thing was done in fs/pipe.c and most of fs/splice.c, but we had
a few missing still.
Signed-off-by: Jens Axboe <axboe@suse.de>
|
|
Nick says that the current construct isn't safe. This goes back to the
original, but sets PIPE_BUF_FLAG_LRU on user pages as well as they all
seem to be on the LRU in the first place.
Signed-off-by: Jens Axboe <axboe@suse.de>
|
|
Looking at generic_file_buffered_write(), we need to unlock_page() if
prepare write fails and it isn't due to racing with truncate().
Also trim the size if ->prepare_write() fails, if we have to.
Signed-off-by: Jens Axboe <axboe@suse.de>
|
|
Some places in ext3 multiple block allocation code (in 2.6.17-rc3) don't
handle the little endian well. This was resulting in *wrong* block numbers
being assigned to in-memory block variables and then stored on disk
eventually. The following patch has been verified to fix an ext3
filesystem failure when run ltp test on a 64 bit machine.
Signed-off-by; Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Apply the same rules as the anon pipe pages, only allow stealing
if no one else is using the page.
Signed-off-by: Jens Axboe <axboe@suse.de>
|
|
Currently we rely on the PIPE_BUF_FLAG_LRU flag being set correctly
to know whether we need to fiddle with page LRU state after stealing it,
however for some origins we just don't know if the page is on the LRU
list or not.
So remove PIPE_BUF_FLAG_LRU and do this check/add manually in pipe_to_file()
instead.
Signed-off-by: Jens Axboe <axboe@suse.de>
|
|
We need to use the minium of {len, PAGE_SIZE-off}, not {len, PAGE_SIZE}-off.
The latter doesn't make any sense, and could cause us to attempt negative
length transfers...
Signed-off-by: Jens Axboe <axboe@suse.de>
|
|
* 'splice' of git://brick.kernel.dk/data/git/linux-2.6-block:
[PATCH] vmsplice: allow user to pass in gift pages
[PATCH] pipe: enable atomic copying of pipe data to/from user space
[PATCH] splice: call handle_ra_miss() on failure to lookup page
[PATCH] Add ->splice_read/splice_write to def_blk_fops
[PATCH] pipe: introduce ->pin() buffer operation
[PATCH] splice: fix bugs in pipe_to_file()
[PATCH] splice: fix bugs with stealing regular pipe pages
|
|
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
If SPLICE_F_GIFT is set, the user is basically giving this pages away to
the kernel. That means we can steal them for eg page cache uses instead
of copying it.
The data must be properly page aligned and also a multiple of the page size
in length.
Signed-off-by: Jens Axboe <axboe@suse.de>
|
|
The pipe ->map() method uses kmap() to virtually map the pages, which
is both slow and has known scalability issues on SMP. This patch enables
atomic copying of pipe pages, by pre-faulting data and using kmap_atomic()
instead.
lmbench bw_pipe and lat_pipe measurements agree this is a Good Thing. Here
are results from that on a UP machine with highmem (1.5GiB of RAM), running
first a UP kernel, SMP kernel, and SMP kernel patched.
Vanilla-UP:
Pipe bandwidth: 1622.28 MB/sec
Pipe bandwidth: 1610.59 MB/sec
Pipe bandwidth: 1608.30 MB/sec
Pipe latency: 7.3275 microseconds
Pipe latency: 7.2995 microseconds
Pipe latency: 7.3097 microseconds
Vanilla-SMP:
Pipe bandwidth: 1382.19 MB/sec
Pipe bandwidth: 1317.27 MB/sec
Pipe bandwidth: 1355.61 MB/sec
Pipe latency: 9.6402 microseconds
Pipe latency: 9.6696 microseconds
Pipe latency: 9.6153 microseconds
Patched-SMP:
Pipe bandwidth: 1578.70 MB/sec
Pipe bandwidth: 1579.95 MB/sec
Pipe bandwidth: 1578.63 MB/sec
Pipe latency: 9.1654 microseconds
Pipe latency: 9.2266 microseconds
Pipe latency: 9.1527 microseconds
Signed-off-by: Jens Axboe <axboe@suse.de>
|
|
Notify the readahead logic of the missing page. Suggested by
Oleg Nesterov.
Signed-off-by: Jens Axboe <axboe@suse.de>
|
|
It can use the generic handlers.
Signed-off-by: Jens Axboe <axboe@suse.de>
|
|
The ->map() function is really expensive on highmem machines right now,
since it has to use the slower kmap() instead of kmap_atomic(). Splice
rarely needs to access the virtual address of a page, so it's a waste
of time doing it.
Introduce ->pin() to take over the responsibility of making sure the
page data is valid. ->map() is then reduced to just kmap(). That way we
can also share a most of the pipe buffer ops between pipe.c and splice.c
Signed-off-by: Jens Axboe <axboe@suse.de>
|
|
Found by Oleg Nesterov <oleg@tv-sign.ru>, fixed by me.
- Only allow full pages to go to the page cache.
- Check page != buf->page instead of using PIPE_BUF_FLAG_STOLEN.
- Remember to clear 'stolen' if add_to_page_cache() fails.
And as a cleanup on that:
- Make the bottom fall-through logic a little less convoluted. Also make
the steal path hold an extra reference to the page, so we don't have
to differentiate between stolen and non-stolen at the end.
Signed-off-by: Jens Axboe <axboe@suse.de>
|
|
- Check that page has suitable count for stealing in the regular pipes.
- pipe_to_file() assumes that the page is locked on succesful steal, so
do that in the pipe steal hook
- Missing unlock_page() in add_to_page_cache() failure.
Signed-off-by: Jens Axboe <axboe@suse.de>
|
|
Wire up *at syscalls.
This patch has been tested on ppc64 (using glibc's testsuite, both 32bit
and 64bit), and compile-tested for ppc32 (I have currently no ppc32 system
available, but I expect no problems).
Signed-off-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
|
|
Use the new find_get_pages_contig() to potentially look up the entire
splice range in one single call. This speeds up generic_file_splice_read()
quite a bit.
Signed-off-by: Jens Axboe <axboe@suse.de>
|
|
Avoids doing useless work, when the file is fully cached.
Signed-off-by: Jens Axboe <axboe@suse.de>
|
|
This patch addresses a flaw in LSM, where there is no mediation of readv()
and writev() in for 32-bit compatible apps using a 64-bit kernel.
This bug was discovered and fixed initially in the native readv/writev
code [1], but was not fixed in the compat code. Thanks to Al for spotting
this one.
[1] http://lwn.net/Articles/154282/
Signed-off-by: James Morris <jmorris@namei.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
All modifications of ->i_flags in inodes that might be visible to
somebody else must be under ->i_mutex. That patch fixes ext3 ioctl()
setting S_APPEND and friends.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
sbi->s_group_desc is an array of pointers to buffer_head. memcpy() of
buffer size from address of buffer_head is a bad idea - it will generate
junk in any case, may oops if buffer_head is close to the end of slab
page and next page is not mapped and isn't what was intended there.
IOW, ->b_data is missing in that call. Fortunately, result doesn't go
into the primary on-disk data structures, so only backup ones get crap
written to them; that had allowed this bug to remain unnoticed until
now.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
* 'splice' of git://brick.kernel.dk/data/git/linux-2.6-block:
[PATCH] splice: add ->splice_write support for /dev/null
[PATCH] splice: rearrange moving to/from pipe helpers
[PATCH] Add support for the sys_vmsplice syscall
[PATCH] splice: fix offset problems
[PATCH] splice: fix min() warning
|
|
We need these for people writing their own ->splice_read/write hooks.
Signed-off-by: Jens Axboe <axboe@suse.de>
|
|
sys_splice() moves data to/from pipes with a file input/output. sys_vmsplice()
moves data to a pipe, with the input being a user address range instead.
This uses an approach suggested by Linus, where we can hold partial ranges
inside the pages[] map. Hopefully this will be useful for network
receive support as well.
Signed-off-by: Jens Axboe <axboe@suse.de>
|
|
BKL does not protect against races if the task may sleep between
checking and setting a value. So move checking of file->private_data
near to setting it in fuse_fill_super().
Found by Al Viro.
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
|
|
A deadlock was possible, when the last reference to the superblock was
held due to a background request containing a file reference.
Releasing the file would release the vfsmount which in turn would
release the superblock. Since sbput_sem is held during the fput() and
fuse_put_super() tries to acquire this same semaphore, a deadlock
results.
The solution is to move the fput() outside the region protected by
sbput_sem.
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
|
|
This reverts 73ce8355c243a434524a34c05cc417dd0467996e commit.
It was wrong, because it didn't take into account the requirement,
that iput() for background requests must be performed synchronously
with ->put_super(), otherwise active inodes may remain after unmount.
The right solution is to keep the sbput_sem and perform iput() within
the locked region, but move fput() outside sbput_sem.
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
|
|
Make the move_from_pipe() actors return number of bytes processed, then
move_from_pipe() can decide more cleverly when to move on to the next
buffer.
This fixes problems with pipe offset and differing file offset.
Signed-off-by: Jens Axboe <axboe@suse.de>
|
|
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jens Axboe <axboe@suse.de>
|
|
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
|
|
* master.kernel.org:/pub/scm/linux/kernel/git/sfrench/cifs-2.6-stable:
[CIFS] Fix typo in previous
[CIFS] Readdir fixes to allow search to start at arbitrary position
[CIFS] Use the kthread_ API instead of opencoding lots of hairy code for kernel
[CIFS] Don't allow a backslash in a path component
[CIFS] [CIFS] Do not take rename sem on most path based calls (during
|
|
Signed-off-by: Steve French <sfrench@us.ibm.com>
|
|
reiserfs_cache_default_acl() should return whether we successfully found
the acl or not. We have to return correct value even if reiserfs_get_acl()
returns error code and not just 0. Otherwise callers such as
reiserfs_mkdir() can unnecessarily lock the xattrs and later functions such
as reiserfs_new_inode() fail to notice that we have already taken the lock
and try to take it again with obvious consequences.
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: <reiserfs-dev@namesys.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
in directory
Also includes first part of fix to compensate for servers which forget
to return . and .. as well as updates to changelog and cifs readme.
Signed-off-by: Steve French <sfrench@us.ibm.com>
|
|
thread creation and teardown.
It does not move the cifsd thread handling to kthread due to problems
found in testing with wakeup of threads blocked in the socket peek api,
but the other cifs kernel threads now use kthread.
Also cleanup cifs_init to properly unwind when thread creation fails.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
|
|
Unless Posix paths have been negotiated, the backslash, "\", is not a valid
character in a path component.
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
|
|
building of full path) to avoid hang rename/readdir hang
Reported by Alan Tyson
Signed-off-by: Steve French <sfrench@us.ibm.com>
|
|
Signed-off-by: Jens Axboe <axboe@suse.de>
|
|
* git://git.linux-nfs.org/pub/linux/nfs-2.6:
SUNRPC: Dead code in net/sunrpc/auth_gss/auth_gss.c
NFS: remove needless check in nfs_opendir()
NFS: nfs_show_stats; for_each_possible_cpu(), not NR_CPUS
NFS: make 2 functions static
NFS,SUNRPC: Fix compiler warnings if CONFIG_PROC_FS & CONFIG_SYSCTL are unset
NFS: fix PROC_FS=n compile error
VFS: Fix another open intent Oops
RPCSEC_GSS: fix leak in krb5 code caused by superfluous kmalloc
|
|
Local variable res was initialized to 0 - no check needed here.
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Convert a for-loop that explicitly references "NR_CPUS" into the
potentially more efficient for_each_possible_cpu() construct.
Signed-off-by: John Hawkes <hawkes@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
If the call to nfs_intent_set_file() fails to open a file in
nfs4_proc_create(), we should return an error.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
* 'splice' of git://brick.kernel.dk/data/git/linux-2.6-block:
[PATCH] splice: fixup writeout path after ->map changes
[PATCH] splice: offset fixes
[PATCH] tee: link_pipe() must be careful when dropping one of the pipe locks
[PATCH] splice: cleanup the SPLICE_F_NONBLOCK handling
[PATCH] splice: close i_size truncate races on read
|
|
There are places in the kernel where we look up files in fd tables and
access the file structure without holding refereces to the file. So, we
need special care to avoid the race between looking up files in the fd
table and tearing down of the file in another CPU. Otherwise, one might
see a NULL f_dentry or such torn down version of the file. This patch
fixes those special places where such a race may happen.
Signed-off-by: Dipankar Sarma <dipankar@in.ibm.com>
Acked-by: "Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
In kernel bugzilla #6248 (http://bugzilla.kernel.org/show_bug.cgi?id=6248),
Adrian Bunk <bunk@stusta.de> notes that CONFIG_HUGETLBFS is missing Kconfig
help text.
Signed-off-by: Arthur Othieno <apgo@patchbomb.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
While we can currently walk through thread groups, process groups, and
sessions with just the rcu_read_lock, this opens the door to walking the
entire task list.
We already have all of the other RCU guarantees so there is no cost in
doing this, this should be enough so that proc can stop taking the
tasklist lock during readdir.
prev_task was killed because it has no users, and using it will miss new
tasks when doing an rcu traversal.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
