| Age | Commit message (Collapse) | Author |
|---|
|
Add the *remount* handle of flush_merge option, so that the users
can enable flush_merge in the runtime, such as the underlying device
handles the cache_flush command relatively slowly.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
Use set_mask_bits() to atomically set i_flags instead of clearing out the
S_IMMUTABLE, S_APPEND, etc. flags and then setting them from the
FS_IMMUTABLE_FL, FS_APPEND_FL, etc. flags, since this opens up a race
where an immutable file has the immutable flag cleared for a brief
window of time.
Signed-off-by: Zhang Zhen <zhenzhang.zhang@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
Make recover_inline_xattr() static, because this function is
used only in this file.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
This patch removes list opeations in handling dirty dir inodes.
Previously, F2FS traverses whole the list of dirty dir inodes to check whether
there is an existing inode or not, resulting in heavy CPU overheads.
So this patch removes such the traverse operations by adding FI_DIRTY_DIR to
indicate the inode lies on the list or not.
Through this simple flag, we can remove redundant operations gracefully.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
If it occurs an error, we should call f2fs_unlock_op.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
This patch replace some general codes with redirty_page_for_writepage, which
can be enabled after consideration on additional procedure like counting dirty
pages appropriately.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
The f2fs always scans the next chain of direct node blocks.
But some garbage blocks are able to be remained due to no discard support or
SSR triggers.
This occasionally wreaks recovering wrong inodes that were used or BUG_ONs
due to reallocating node ids as follows.
When mount this f2fs image:
http://linuxtesting.org/downloads/f2fs_fault_image.zip
BUG_ON is triggered in f2fs driver (messages below are generated on
kernel 3.13.2; for other kernels output is similar):
kernel BUG at fs/f2fs/node.c:215!
Call Trace:
[<ffffffffa032ebad>] recover_inode_page+0x1fd/0x3e0 [f2fs]
[<ffffffff811446e7>] ? __lock_page+0x67/0x70
[<ffffffff81089990>] ? autoremove_wake_function+0x50/0x50
[<ffffffffa0337788>] recover_fsync_data+0x1398/0x15d0 [f2fs]
[<ffffffff812b9e5c>] ? selinux_d_instantiate+0x1c/0x20
[<ffffffff811cb20b>] ? d_instantiate+0x5b/0x80
[<ffffffffa0321044>] f2fs_fill_super+0xb04/0xbf0 [f2fs]
[<ffffffff811b861e>] ? mount_bdev+0x7e/0x210
[<ffffffff811b8769>] mount_bdev+0x1c9/0x210
[<ffffffffa0320540>] ? validate_superblock+0x210/0x210 [f2fs]
[<ffffffffa031cf8d>] f2fs_mount+0x1d/0x30 [f2fs]
[<ffffffff811b9497>] mount_fs+0x47/0x1c0
[<ffffffff81166e00>] ? __alloc_percpu+0x10/0x20
[<ffffffff811d4032>] vfs_kern_mount+0x72/0x110
[<ffffffff811d6763>] do_mount+0x493/0x910
[<ffffffff811615cb>] ? strndup_user+0x5b/0x80
[<ffffffff811d6c70>] SyS_mount+0x90/0xe0
[<ffffffff8166f8d9>] system_call_fastpath+0x16/0x1b
Found by Linux File System Verification project (linuxtesting.org).
Reported-by: Andrey Tsyvarev <tsyvarev@ispras.ru>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
Enable flush_merge only in f2fs is not read-only, so does the mount
option show.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
Put the bio when the flush cmd issued, it also can fix the following
kmemleak:
unreferenced object 0xffff8800270c73c0 (size 200):
comm "f2fs_flush-7:0", pid 27161, jiffies 4312127988 (age 988.503s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 40 07 81 19 01 88 ff ff ........@.......
01 00 00 00 00 00 00 f0 11 14 00 00 00 00 00 00 ................
backtrace:
[<ffffffff81559866>] kmemleak_alloc+0x72/0x96
[<ffffffff81156f7e>] slab_post_alloc_hook+0x28/0x2a
[<ffffffff811595b1>] kmem_cache_alloc+0xec/0x157
[<ffffffff8111924d>] mempool_alloc_slab+0x15/0x17
[<ffffffff81119513>] mempool_alloc+0x71/0x138
[<ffffffff81193548>] bio_alloc_bioset+0x93/0x18c
[<ffffffffa040f857>] issue_flush_thread+0x8d/0x145 [f2fs]
[<ffffffff8107ac16>] kthread+0xba/0xc2
[<ffffffff81571b2c>] ret_from_fork+0x7c/0xb0
[<ffffffffffffffff>] 0xffffffffffffffff
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
Directory readahead can throw loud scary but harmless warnings
when multiblock directories are in use a specific pattern of
discontiguous blocks are found in the directory. That is, if a hole
follows a discontiguous block, it will throw a warning like:
XFS (dm-1): xfs_da_do_buf: bno 637 dir: inode 34363923462
XFS (dm-1): [00] br_startoff 637 br_startblock 1917954575 br_blockcount 1 br_state 0
XFS (dm-1): [01] br_startoff 638 br_startblock -2 br_blockcount 1 br_state 0
And dump a stack trace.
This is because the readahead offset increment loop does a double
increment of the block index - it does an increment for the loop
iteration as well as increase the loop counter by the number of
blocks in the extent. As a result, the readahead offset does not get
incremented correctly for discontiguous blocks and hence can ask for
readahead of a directory block from an offset part way through a
directory block. If that directory block is followed by a hole, it
will trigger a mapping warning like the above.
The bad readahead will be ignored, though, because the main
directory block read loop uses the correct mapping offsets rather
than the readahead offset and so will ignore the bad readahead
altogether.
Fix the warning by ensuring that the readahead offset is correctly
incremented.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
Reports of a shutdown hang when fsyncing a directory have surfaced,
such as this:
[ 3663.394472] Call Trace:
[ 3663.397199] [<ffffffff815f1889>] schedule+0x29/0x70
[ 3663.402743] [<ffffffffa01feda5>] xlog_cil_force_lsn+0x185/0x1a0 [xfs]
[ 3663.416249] [<ffffffffa01fd3af>] _xfs_log_force_lsn+0x6f/0x2f0 [xfs]
[ 3663.429271] [<ffffffffa01a339d>] xfs_dir_fsync+0x7d/0xe0 [xfs]
[ 3663.435873] [<ffffffff811df8c5>] do_fsync+0x65/0xa0
[ 3663.441408] [<ffffffff811dfbc0>] SyS_fsync+0x10/0x20
[ 3663.447043] [<ffffffff815fc7d9>] system_call_fastpath+0x16/0x1b
If we trigger a shutdown in xlog_cil_push() from xlog_write(), we
will never wake waiters on the current push sequence number, so
anything waiting in xlog_cil_force_lsn() for that push sequence
number to come up will not get woken and hence stall the shutdown.
Fix this by ensuring we call wake_up_all(&cil->xc_commit_wait) in
the push abort handling, in the log shutdown code when waking all
waiters, and adding a shutdown check in the sequence completion wait
loops to ensure they abort when a wakeup due to a shutdown occurs.
Reported-by: Boris Ranto <branto@redhat.com>
Reported-by: Eric Sandeen <esandeen@redhat.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
truncate_setsize() removes pages from the page cache, and hence
requires page locks to be held. It is not valid to lock a page cache
page inside a transaction context as we can hold page locks when we
we reserve space for a transaction. If we do, then we expose an ABBA
deadlock between log space reservation and page locks.
That is, both the write path and writeback lock a page, then start a
transaction for block allocation, which means they can block waiting
for a log reservation with the page lock held. If we hold a log
reservation and then do something that locks a page (e.g.
truncate_setsize in xfs_setattr_size) then that page lock can block
on the page locked and waiting for a log reservation. If the
transaction that is waiting for the page lock is the only active
transaction in the system that can free log space via a commit,
then writeback will never make progress and so log space will never
free up.
This issue with xfs_setattr_size() was introduced back in 2010 by
commit fa9b227 ("xfs: new truncate sequence") which moved the page
cache truncate from outside the transaction context (what was
xfs_itruncate_data()) to inside the transaction context as a call to
truncate_setsize().
The reason truncate_setsize() was located where in this place was
that we can't shouldn't change the file size until after we are in
the transaction context and the operation will either succeed or
shut down the filesystem on failure. However, block_truncate_page()
already modifies the file contents before we enter the transaction
context, so we can't really fulfill this guarantee in any way. Hence
we may as well ensure that on success or failure, the in-memory
inode and data is truncated away and that the application cleans up
the mess appropriately.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
They do not need to be used outside fs/nfsd/nfs4state.c
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
There is almost nothing left it in, just merge it into the only file
that includes it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
There are no legitimate users outside of fs/nfsd, so move it there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
There are no legitimate users outside of fs/nfsd, so move it there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
The only real user of this header is fs/nfsd/nfsfh.h, so merge the
two. Various lockѕ source files used it to indirectly get other
sunrpc or nfs headers, so fix those up.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
It is large, it is used in more than one place, and it is not performance
critical. Let gcc figure out whether it should be inlined...
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
When building without CONFIG_SYSCTL, the compiler saw an unused
label. This moves the label into the #ifdef it is used under.
fs/lockd/svc.c: In function ‘init_nlm’:
fs/lockd/svc.c:626:1: warning: label ‘err_sysctl’ defined but not used [-Wunused-label]
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
New variant of iov_iter - ITER_BVEC in iter->type, backed with
bio_vec array instead of iovec one. Primitives taught to deal
with such beasts, __swap_write() switched to using that kind
of iov_iter.
Note that bio_vec is just a <page, offset, length> triple - there's
nothing block-specific about it. I've left the definition where it
was, but took it from under ifdef CONFIG_BLOCK.
Next target: ->splice_write()...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
all needed primitives are there...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
parallel to copy_page_to_iter(). pipe_write() switched to it (and became
->write_iter()).
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
unfortunately, Ted's changes to ext4_file_write() are *still* an
incomplete fix - playing with rlimits can let you smuggle an
unaligned request past the checks. So there almost certainly
will be more merge PITA around that place...
[fix from Peter Ujfalusi <peter.ujfalusi@ti.com> folded]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
From ext4.git#dev, needed for switch of ext4 to ->write_iter() ;-/
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
tracepoints are evil, exhibit #6969...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Beginning to introduce those. Just the callers for now, and it's
clumsier than it'll eventually become; once we finish converting
aio_read and aio_write instances, the things will get nicer.
For now, these guys are in parallel to ->aio_read() and ->aio_write();
they take iocb and iov_iter, with everything in iov_iter already
validated. File offset is passed in iocb->ki_pos, iov/nr_segs -
in iov_iter.
Main concerns in that series are stack footprint and ability to
split the damn thing cleanly.
[fix from Peter Ujfalusi <peter.ujfalusi@ti.com> folded]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
