summaryrefslogtreecommitdiffstats
path: root/fs
AgeCommit message (Collapse)Author
2012-12-06NFSv4: Simplify the NFSv4/v4.1 synchronous call switchTrond Myklebust
We shouldn't need to pass the 'cache_reply' parameter if we initialise the sequence_args/sequence_res in the caller. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-12-06NFSv4.1: Simplify the sequence setupTrond Myklebust
Nobody calls nfs4_setup_sequence or nfs41_setup_sequence without also calling rpc_call_start() on success. This commit therefore folds the rpc_call_start call into nfs41_setup_sequence(). Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-12-06NFSv4.1: Use nfs41_setup_sequence where appropriateTrond Myklebust
There is no point in using nfs4_setup_sequence or nfs4_sequence_done in pure NFSv4.1 functions. We already know that those have sessions... Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-12-06NFSv4.1: Ping server when our session table limits are too highTrond Myklebust
If the server requests a lower target_highest_slotid, then ensure that we ping it with at least one RPC call containing an appropriate SEQUENCE op. This ensures that the server won't need to send a recall callback in order to shrink the slot table. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-12-06NFSv4.1: Set the maximum slot table size to 1024 slotsTrond Myklebust
This means that we end up statically allocating 128 bytes for the bitmap on each slot table. For a server that supports 1MB write and read I/O sizes this means that we can completely fill the maximum 1GB TCP send/receive windows. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-12-06NFSv4.1: Move slot table and session struct definitions to nfs4session.hTrond Myklebust
Clean up. Gather NFSv4.1 slot definitions in fs/nfs/nfs4session.h. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-12-06NFSv4.1: Cleanup move session slot management to fs/nfs/nfs4session.cTrond Myklebust
NFSv4.1 session management is getting complex enough to deserve a separate file. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-12-06NFSv4: Move nfs4_wait_clnt_recover and nfs4_client_recover_expired_leaseTrond Myklebust
nfs4_wait_clnt_recover and nfs4_client_recover_expired_lease are both generic state related functions. As such, they belong in nfs4state.c, and not nfs4proc.c Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-12-06NFSv4.1: Clean up session drainingTrond Myklebust
Coalesce nfs4_check_drain_bc_complete and nfs4_check_drain_fc_complete into a single function that can be called when the slot table is known to be empty, then change nfs4_callback_free_slot() and nfs4_free_slot() to use it. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-12-06NFSv4.1: If slot allocation fails due to OOM, retry more quicklyTrond Myklebust
If the NFSv4.1 session slot allocation fails due to an ENOMEM condition, then set the task->tk_timeout to 1/4 second to ensure that we do retry the slot allocation more quickly. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-12-06NFSv4.1: CB_RECALL_SLOT must schedule a sequence op after updating targetsTrond Myklebust
RFC5661 requires us to make sure that the server knows we've updated our slot table size by sending at least one SEQUENCE op containing the new 'highest_slotid' value. We can do so using the 'CHECK_LEASE' functionality of the state manager. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-12-06NFSv4.1: Remove the state manager code to resize the slot tableTrond Myklebust
The state manager no longer needs any special machinery to stop the session flow and resize the slot table. It is all done on the fly by the SEQUENCE op code now. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-12-06NFSv4.1: Allow SEQUENCE to resize the slot table on the flyTrond Myklebust
Instead of an array of slots, use a singly linked list of slots that can be dynamically appended to or shrunk. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-12-06NFSv4.1: Support dynamic resizing of the session slot tableTrond Myklebust
Allow the server to control the size of the session slot table by adjusting the value of sr_target_max_slots in the reply to the SEQUENCE operation. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-12-06NFSv4.1: Allow the server to recall all but one slotTrond Myklebust
If the server wants to leave us with only one slot, or it wants to "shrink" our slot table to something larger than we have now, then so be it. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-12-06NFSv4.1: Don't confuse target_highest_slotid and max_slots in cb_recall_slotTrond Myklebust
Don't confuse the table size and the target_highest_slotid... Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-12-06NFSv4.1: Fix nfs4_callback_recallslot to work with dynamic slot allocationTrond Myklebust
Ensure that the NFSv4.1 CB_RECALL_SLOT callback updates the slot table target max slotid safely. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-12-06NFSv4.1: Reset the sequence number for slots that have been deallocatedTrond Myklebust
When the server tells us that it is dynamically resizing the session replay cache, we should reset the sequence number for those slots that have been deallocated. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-12-06NFSv4.1: Ensure that the client tracks the server target_highest_slotidTrond Myklebust
Dynamic slot allocation in NFSv4.1 depends on the client being able to track the server's target value for the highest slotid in the slot table. See the reference in Section 2.10.6.1 of RFC5661. To avoid ordering problems in the case where 2 SEQUENCE replies contain conflicting updates to this target value, we also introduce a generation counter, to track whether or not an RPC containing a SEQUENCE operation was launched before or after the last update. Also rename the nfs4_slot_table target_max_slots field to 'target_highest_slotid' to avoid confusion with a slot table size or number of slots. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-26NFSv4.1: Clean up nfs4_free_slotTrond Myklebust
Change the argument to take the pointer to the slot, instead of just the slotid. We know that the new value of highest_used_slot must be less than the current value. No need to scan the whole table. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-26NFSv4.1: Simplify slot allocationTrond Myklebust
Clean up the NFSv4.1 slot allocation by replacing nfs_find_slot() with a function nfs_alloc_slot() that returns a pointer to the nfs4_slot instead of an offset into the slot table. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-26NFSv4.1: Simplify struct nfs4_sequence_args tooTrond Myklebust
Replace the session pointer + slotid with a pointer to the allocated slot. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-26NFSv4.1: Label each entry in the session slot tables with its slot numberTrond Myklebust
Instead of doing slot table pointer gymnastics every time we want to know which slot we're using. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-26NFSv4.1: Shrink struct nfs4_sequence_res by moving the session pointerTrond Myklebust
Move the session pointer into the slot table, then have struct nfs4_slot point to that slot table. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-21NFSv4.1: Shrink struct nfs4_sequence_res by moving sr_renewal_timeTrond Myklebust
Store the renewal time inside the session slot instead. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-21NFSv4.1: clean up nfs4_recall_slot to use nfs4_alloc_slotsTrond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-21NFSv4.1: nfs4_alloc_slots doesn't need zeroingTrond Myklebust
All that memory is going to be initialised to non-zero by nfs4_add_and_init_slots anyway. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-21NFSv4.1: We must bump the clientid sequence number after CREATE_SESSIONTrond Myklebust
We must always bump the clientid sequence number after a successful call to CREATE_SESSION on the server. The result of nfs4_verify_channel_attrs() is irrelevant to that requirement. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-21NFSv4.1: Adjust CREATE_SESSION arguments when mounting a new filesystemTrond Myklebust
If we're mounting a new filesystem, ensure that the session has negotiated large enough request and reply sizes to match the wsize and rsize mount arguments. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-21NFSv4.1: Don't confuse CREATE_SESSION arguments and resultsTrond Myklebust
Don't store the target request and response sizes in the same variables used to store the server's replies to those targets. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-21NFSv4.1: Handle session reset and bind_conn_to_session before lease checkTrond Myklebust
We can't send a SEQUENCE op unless the session is OK, so it is pointless to handle the CHECK_LEASE state before we've dealt with SESSION_RESET and BIND_CONN_TO_SESSION. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-20NFS: Add sequence_priviliged_ops for nfs4_proc_sequence()Bryan Schumaker
If I mount an NFS v4.1 server to a single client multiple times and then run xfstests over each mountpoint I usually get the client into a state where recovery deadlocks. The server informs the client of a cb_path_down sequence error, the client then does a bind_connection_to_session and checks the status of the lease. I found that bind_connection_to_session sets the NFS4_SESSION_DRAINING flag on the client, but this flag is never unset before nfs4_check_lease() reaches nfs4_proc_sequence(). This causes the client to deadlock, halting all NFS activity to the server. nfs4_proc_sequence() is only called by the state manager, so I can change it to run in privileged mode to bypass the NFS4_SESSION_DRAINING check and avoid the deadlock. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@vger.kernel.org
2012-11-04lockd: Remove BUG_ON()s from fs/lockd/clntproc.cTrond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-04lockd: Remove BUG_ON()s in fs/lockd/host.cTrond Myklebust
- Convert the non-trivial ones into WARN_ON_ONCE(). - Remove the trivial refcounting BUGs Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-04lockd: Remove trivial BUG_ON()s from the NSM codeTrond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-04lockd: Remove unnecessary BUG_ON()s in the xdr client codeTrond Myklebust
- Offset bound checks are done in the NFS client code. - So are filehandle size checks - The cookie length is a constant - The utsname()->nodename is already bounded Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-04NFS: Remove the BUG_ON() in the mount codeTrond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-04NFS: Remove BUG_ON()s in the fs/nfs/inode.cTrond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-04NFSv4: Get rid of unnecessary BUG_ON()sTrond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-04NFS: Remove BUG_ON() calls from the generic writeback codeTrond Myklebust
...and ensure that we set the return value for nfs_page_async_flush() to zero! (Reported-by: Dros Adamson) Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-04NFSv4.1: Remove assertion BUG_ON()s from the files and generic layout codeTrond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-04NFSv4.1: Remove unused function last_byte_offsetTrond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-04NFSv4: Remove the BUG_ON() from nfs4_get_lease_time_prepare()...Trond Myklebust
An EAGAIN return value would be unexpected, but there is no reason to BUG... Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-04NFS: Remove asserts from the NFS XDR codeTrond Myklebust
Convert the ones that are not trivial to check into WARN_ON_ONCE(). Remove checks for things such as NFS2_MAXPATHLEN, which are trivially done by the caller. Add a comment to the case of nfs3_xdr_enc_setacl3args. What is being done there is just wrong... Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-04NFS: Get rid of unnecessary assertsTrond Myklebust
If the nfs_client fails to initialise correctly, then it will return an error condition. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-02NFS4: nfs4_opendata_access should return errnoWeston Andros Adamson
Return errno - not an NFS4ERR_. This worked because NFS4ERR_ACCESS == EACCES. Signed-off-by: Weston Andros Adamson <dros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-01NFSv4: Initialise the NFSv4.1 slot table highest_used_slotid correctlyTrond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-10-31NFS: add nfs_sb_deactive_async to avoid deadlockWeston Andros Adamson
Use nfs_sb_deactive_async instead of nfs_sb_deactive when in a workqueue context. This avoids a deadlock where rpc_shutdown_client loops forever in a workqueue kworker context, trying to kill all RPC tasks associated with the client, while one or more of these tasks have already been assigned to the same kworker (and will never run rpc_exit_task). This approach is needed because RPC tasks that have already been assigned to a kworker by queue_work cannot be canceled, as explained in the comment for workqueue.c:insert_wq_barrier. Signed-off-by: Weston Andros Adamson <dros@netapp.com> [Trond: add module_get/put.] Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-10-31nfs: Show original device name verbatim in /proc/*/mount{s,info}Ben Hutchings
Since commit c7f404b ('vfs: new superblock methods to override /proc/*/mount{s,info}'), nfs_path() is used to generate the mounted device name reported back to userland. nfs_path() always generates a trailing slash when the given dentry is the root of an NFS mount, but userland may expect the original device name to be returned verbatim (as it used to be). Make this canonicalisation optional and change the callers accordingly. [jrnieder@gmail.com: use flag instead of bool argument] Reported-and-tested-by: Chris Hiestand <chiestand@salk.edu> Reference: http://bugs.debian.org/669314 Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: <stable@vger.kernel.org> # v2.6.39+ Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-10-31nfsv3: Make v3 mounts fail with ETIMEDOUTs instead EIO on mountd timeoutsScott Mayhew
In very busy v3 environment, rpc.mountd can respond to the NULL procedure but not the MNT procedure in a timely manner causing the MNT procedure to time out. The problem is the mount system call returns EIO which causes the mount to fail, instead of ETIMEDOUT, which would cause the mount to be retried. This patch sets the RPC_TASK_SOFT|RPC_TASK_TIMEOUT flags to the rpc_call_sync() call in nfs_mount() which causes ETIMEDOUT to be returned on timed out connections. Signed-off-by: Steve Dickson <steved@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@vger.kernel.org
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-02-10 11:27:09 +0000