summaryrefslogtreecommitdiffstats
path: root/fs
AgeCommit message (Collapse)Author
2010-11-27Btrfs: make sure new inode size is ok in fallocateJosef Bacik
We have been failing xfstest 228 forever, because we don't check to make sure the new inode size is acceptable as far as RLIMIT is concerned. Just check to make sure it's ok to create a inode with this new size and error out if not. With this patch we now pass 228. Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-11-27Btrfs: fix typo in fallocate to make it honor actual sizeJosef Bacik
There is a typo in __btrfs_prealloc_file_range() where we set the i_size to actual_len/cur_offset, and then just set it to cur_offset again, and do the same with btrfs_ordered_update_i_size(). This fixes it back to keeping i_size in a local variable and then updating i_size properly. Tested this with xfs_io -F -f -c "falloc 0 1" -c "pwrite 0 1" foo stat'ing foo gives us a size of 1 instead of 4096 like it was. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-11-21Btrfs: avoid NULL pointer deref in try_release_extent_bufferChris Mason
If we fail to find a pointer in the radix tree, don't try to deref the NULL one we do have. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-11-21Btrfs: make btrfs_add_nondir take parent inode as an argumentJosef Bacik
Everybody who calls btrfs_add_nondir just passes in the dentry of the new file and then dereference dentry->d_parent->d_inode, but everybody who calls btrfs_add_nondir() are already passed the parent's inode. So instead of dereferencing dentry->d_parent, just make btrfs_add_nondir take the dir inode as an argument and pass that along so we don't have to worry about d_parent. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-11-21Btrfs: hold i_mutex when calling btrfs_log_dentry_safeJosef Bacik
Since we walk up the path logging all of the parts of the inode's path, we need to hold i_mutex to make sure that the inode is not renamed while we're logging everything. btrfs_log_dentry_safe does dget_parent and all of that jazz, but we may get unexpected results if the rename changes the inode's location while we're higher up the path logging those dentries, so do this for safety reasons. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-11-21Btrfs: use dget_parent where we can UPDATEDJosef Bacik
There are lots of places where we do dentry->d_parent->d_inode without holding the dentry->d_lock. This could cause problems with rename. So instead we need to use dget_parent() and hold the reference to the parent as long as we are going to use it's inode and then dput it at the end. Signed-off-by: Josef Bacik <josef@redhat.com> Cc: raven@themaw.net Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-11-21Btrfs: fix more ESTALE problems with NFSJosef Bacik
When creating new inodes we don't setup inode->i_generation. So if we generate an fh with a newly created inode we save the generation of 0, but if we flush the inode to disk and have to read it back when getting the inode on the server we'll have the right i_generation, so gens wont match and we get ESTALE. This patch properly sets inode->i_generation when we create the new inode and now I'm no longer getting ESTALE. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-11-21Btrfs: handle NFS lookups properlyJosef Bacik
People kept reporting NFS issues, specifically getting ESTALE alot. I figured out how to reproduce the problem SERVER mkfs.btrfs /dev/sda1 mount /dev/sda1 /mnt/btrfs-test <add /mnt/btrfs-test to /etc/exports> btrfs subvol create /mnt/btrfs-test/foo service nfs start CLIENT mount server:/mnt/btrfs /mnt/test cd /mnt/test/foo ls SERVER echo 3 > /proc/sys/vm/drop_caches CLIENT ls <-- get an ESTALE here This is because the standard way to lookup a name in nfsd is to use readdir, and what it does is do a readdir on the parent directory looking for the inode of the child. So in this case the parent being / and the child being foo. Well subvols all have the same inode number, so doing a readdir of / looking for inode 256 will return '.', which obviously doesn't match foo. So instead we need to have our own .get_name so that we can find the right name. Our .get_name will either lookup the inode backref or the root backref, whichever we're looking for, and return the name we find. Running the above reproducer with this patch results in everything acting the way its supposed to. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-11-21btrfs: make 1-bit signed fileds unsignedMariusz Kozlowski
Fixes these sparse warnings: fs/btrfs/ctree.h:811:17: error: dubious one-bit signed bitfield fs/btrfs/ctree.h:812:20: error: dubious one-bit signed bitfield fs/btrfs/ctree.h:813:19: error: dubious one-bit signed bitfield Signed-off-by: Mariusz Kozlowski <mk@lab.zgora.pl> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-11-21btrfs: Show device attr correctly for symlinksLi Zefan
Symlinks and files of other types show different device numbers, though they are on the same partition: $ touch tmp; ln -s tmp tmp2; stat tmp tmp2 File: `tmp' Size: 0 Blocks: 0 IO Block: 4096 regular empty file Device: 15h/21d Inode: 984027 Links: 1 --- snip --- File: `tmp2' -> `tmp' Size: 3 Blocks: 0 IO Block: 4096 symbolic link Device: 13h/19d Inode: 984028 Links: 1 Reported-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-11-21btrfs: Set file size correctly in file cloneLi Zefan
Set src_offset = 0, src_length = 20K, dest_offset = 20K. And the original filesize of the dest file 'file2' is 30K: # ls -l /mnt/file2 -rw-r--r-- 1 root root 30720 Nov 18 16:42 /mnt/file2 Now clone file1 to file2, the dest file should be 40K, but it still shows 30K: # ls -l /mnt/file2 -rw-r--r-- 1 root root 30720 Nov 18 16:42 /mnt/file2 Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-11-21btrfs: Check if dest_offset is block-size aligned before cloning fileLi Zefan
We've done the check for src_offset and src_length, and We should also check dest_offset, otherwise we'll corrupt the destination file: (After cloning file1 to file2 with unaligned dest_offset) # cat /mnt/file2 cat: /mnt/file2: Input/output error Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-11-21Btrfs: handle the space_cache option properlyJosef Bacik
When I added the clear_cache option I screwed up and took the break out of the space_cache case statement, so whenever you mount with space_cache you also get clear_cache, which does you no good if you say set space_cache in fstab so it always gets set. This patch adds the break back in properly. Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-11-21btrfs: Fix early enospc because 'unused' calculated with wrong sign.Arne Jansen
'unused' calculated with wrong sign in reserve_metadata_bytes(). This might have lead to unwanted over-reservations. Signed-off-by: Arne Jansen <sensille@gmx.net> Reviewed-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-11-21btrfs: fix panic caused by direct IOMiao Xie
btrfs paniced when we write >64KB data by direct IO at one time. Reproduce steps: # mkfs.btrfs /dev/sda5 /dev/sda6 # mount /dev/sda5 /mnt # dd if=/dev/zero of=/mnt/tmpfile bs=100K count=1 oflag=direct Then btrfs paniced: mapping failed logical 1103155200 bio len 69632 len 12288 ------------[ cut here ]------------ kernel BUG at fs/btrfs/volumes.c:3010! [SNIP] Pid: 1992, comm: btrfs-worker-0 Not tainted 2.6.37-rc1 #1 D2399/PRIMERGY RIP: 0010:[<ffffffffa03d1462>] [<ffffffffa03d1462>] btrfs_map_bio+0x202/0x210 [btrfs] [SNIP] Call Trace: [<ffffffffa03ab3eb>] __btrfs_submit_bio_done+0x1b/0x20 [btrfs] [<ffffffffa03a35ff>] run_one_async_done+0x9f/0xb0 [btrfs] [<ffffffffa03d3d20>] run_ordered_completions+0x80/0xc0 [btrfs] [<ffffffffa03d45a4>] worker_loop+0x154/0x5f0 [btrfs] [<ffffffffa03d4450>] ? worker_loop+0x0/0x5f0 [btrfs] [<ffffffffa03d4450>] ? worker_loop+0x0/0x5f0 [btrfs] [<ffffffff81083216>] kthread+0x96/0xa0 [<ffffffff8100cec4>] kernel_thread_helper+0x4/0x10 [<ffffffff81083180>] ? kthread+0x0/0xa0 [<ffffffff8100cec0>] ? kernel_thread_helper+0x0/0x10 We fix this problem by splitting bios when we submit bios. Reported-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Tested-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-11-21btrfs: cleanup duplicate bio allocating functionsMiao Xie
extent_bio_alloc() and compressed_bio_alloc() are similar, cleanup similar source code. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-11-21btrfs: fix free dip and dip->csums twiceMiao Xie
bio_endio() will free dip and dip->csums, so dip and dip->csums twice will be freed twice. Fix it. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-11-21Btrfs: add migrate page for metadata inodeChris Mason
Migrate page will directly call the btrfs btree writepage function, which isn't actually allowed. Our writepage assumes that you have locked the extent_buffer and flagged the block as written. Without doing these steps, we can corrupt metadata blocks. A later commit will remove the btree writepage function since it is really only safely used internally by btrfs. We use writepages for everything else. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-10-30Btrfs: deal with errors from updating the tree logChris Mason
During unlink we remove any references to the inode from the tree log. It can return -ENOENT and other errors, and this changes the unlink code to deal with it. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-10-29Btrfs: allow subvol deletion by unprivileged user with -o user_subvol_rm_allowedSage Weil
Add a mount option user_subvol_rm_allowed that allows users to delete a (potentially non-empty!) subvol when they would otherwise we allowed to do an rmdir(2). We duplicate the may_delete() checks from the core VFS code to implement identical security checks (minus the directory size check). We additionally require that the user has write+exec permission on the subvol root inode. Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-10-29Btrfs: make SNAP_DESTROY asyncSage Weil
There is no reason to force an immediate commit when deleting a snapshot. Users have some expectation that space from a deleted snapshot be freed immediately, but even if we do commit the reclaim is a background process. If users _do_ want the deletion to be durable, they can call 'sync'. Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-10-29Btrfs: add SNAP_CREATE_ASYNC ioctlSage Weil
Create a snap without waiting for it to commit to disk. The ioctl is ordered such that subsequent operations will not be contained by the created snapshot, and the commit is initiated, but the ioctl does not wait for the snapshot to commit to disk. We return the specific transid to userspace so that an application can wait for this specific snapshot creation to commit via the WAIT_SYNC ioctl. Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-10-29Btrfs: add START_SYNC, WAIT_SYNC ioctlsSage Weil
START_SYNC will start a sync/commit, but not wait for it to complete. Any modification started after the ioctl returns is guaranteed not to be included in the commit. If a non-NULL pointer is passed, the transaction id will be returned to userspace. WAIT_SYNC will wait for any in-progress commit to complete. If a transaction id is specified, the ioctl will block and then return (success) when the specified transaction has committed. If it has already committed when we call the ioctl, it returns immediately. If the specified transaction doesn't exist, it returns EINVAL. If no transaction id is specified, WAIT_SYNC will wait for the currently committing transaction to finish it's commit to disk. If there is no currently committing transaction, it returns success. These ioctls are useful for applications which want to impose an ordering on when fs modifications reach disk, but do not want to wait for the full (slow) commit process to do so. Picky callers can take the transid returned by START_SYNC and feed it to WAIT_SYNC, and be certain to wait only as long as necessary for the transaction _they_ started to reach disk. Sloppy callers can START_SYNC and WAIT_SYNC without a transid, and provided they didn't wait too long between the calls, they will get the same result. However, if a second commit starts before they call WAIT_SYNC, they may end up waiting longer for it to commit as well. Even so, a START_SYNC+WAIT_SYNC still guarantees that any operation completed before the START_SYNC reaches disk. Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-10-29Btrfs: async transaction commitSage Weil
Add support for an async transaction commit that is ordered such that any subsequent operations will join the following transaction, but does not wait until the current commit is fully on disk. This avoids much of the latency associated with the btrfs_commit_transaction for callers concerned with serialization and not safety. The wait_for_unblock flag controls whether we wait for the 'middle' portion of commit_transaction to complete, which is necessary if the caller expects some of the modifications contained in the commit to be available (this is the case for subvol/snapshot creation). Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-10-29Btrfs: fix deadlock in btrfs_commit_transactionSage Weil
We calculate timeout (either 1 or MAX_SCHEDULE_TIMEOUT) based on whether num_writers > 1 or should_grow at the top of the loop. Then, much much later, we wait for that timeout if either num_writers or should_grow is true. However, it's possible for a racing process (calling btrfs_end_transaction()) to decrement num_writers such that we wait forever instead of for 1. Fix this by deciding how long to wait when we wait. Include a smp_mb() before checking if the waitqueue is active to ensure the num_writers is visible. Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-10-29Btrfs: fix lockdep warning on clone ioctlSage Weil
I'm no lockdep expert, but this appears to make the lockdep warning go away for the i_mutex locking in the clone ioctl. Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-10-29Btrfs: fix clone ioctl where range is adjacent to extentSage Weil
We had an edge case issue where the requested range was just following an existing extent. Instead of skipping to the next extent, we used the previous one which lead to having zero sized extents. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-10-29Btrfs: fix delalloc checks in clone ioctlSage Weil
The lookup_first_ordered_extent() was done on the wrong inode, and the ->delalloc_bytes test was wrong, as the following btrfs_wait_ordered_range() would only invoke a range write and wouldn't write the entire file data range. Also, a bad parameter was passed to btrfs_wait_ordered_range(). Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-10-29Btrfs: drop unused variable in block_alloc_rsvChris Mason
The alloc_target variable is not really used. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-10-29Btrfs: cleanup warnings from gcc 4.6 (nonbugs)Andi Kleen
These are all the cases where a variable is set, but not read which are not bugs as far as I can see, but simply leftovers. Still needs more review. Found by gcc 4.6's new warnings Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Chris Mason <chris.mason@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-10-29Btrfs: Fix variables set but not read (bugs found by gcc 4.6)Andi Kleen
These are all the cases where a variable is set, but not read which are really bugs. - Couple of incorrect error handling fixed. - One incorrect use of a allocation policy - Some other things Still needs more review. Found by gcc 4.6's new warnings. [akpm@linux-foundation.org: fix build. Might have been bitrot] Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Chris Mason <chris.mason@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-10-29Btrfs: Use ERR_CAST helpersJulia Lawall
Use ERR_CAST(x) rather than ERR_PTR(PTR_ERR(x)). The former makes more clear what is the purpose of the operation, which otherwise looks like a no-op. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ type T; T x; identifier f; @@ T f (...) { <+... - ERR_PTR(PTR_ERR(x)) + x ...+> } @@ expression x; @@ - ERR_PTR(PTR_ERR(x)) + ERR_CAST(x) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: Chris Mason <chris.mason@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-10-29Btrfs: use memdup_user helpersJulia Lawall
Use memdup_user when user data is immediately copied into the allocated region. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression from,to,size,flag; position p; identifier l1,l2; @@ - to = \(kmalloc@p\|kzalloc@p\)(size,flag); + to = memdup_user(from,size); if ( - to==NULL + IS_ERR(to) || ...) { <+... when != goto l1; - -ENOMEM + PTR_ERR(to) ...+> } - if (copy_from_user(to, from, size) != 0) { - <+... when != goto l2; - -EFAULT - ...+> - } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: Chris Mason <chris.mason@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-10-29Btrfs: fix raid code for removing missing drivesChris Mason
When btrfs is mounted in degraded mode, it has some internal structures to track the missing devices. This missing device is setup as readonly, but the mapping code can get upset when we try to write to it. This changes the mapping code to return -EIO instead of oops when we try to write to the readonly device. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-10-29Btrfs: Switch the extent buffer rbtree into a radix treeMiao Xie
This patch reduces the CPU time spent in the extent buffer search by using the radix tree instead of the rbtree and using the rcu lock instead of the spin lock. I did a quick test by the benchmark tool[1] and found the patch improve the file creation/deletion performance problem that I have reported[2]. Before applying this patch: Create files: Total files: 50000 Total time: 0.971531 Average time: 0.000019 Delete files: Total files: 50000 Total time: 1.366761 Average time: 0.000027 After applying this patch: Create files: Total files: 50000 Total time: 0.927455 Average time: 0.000019 Delete files: Total files: 50000 Total time: 1.292280 Average time: 0.000026 [1] http://marc.info/?l=linux-btrfs&m=128212635122920&q=p3 [2] http://marc.info/?l=linux-btrfs&m=128212635122920&w=2 Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-10-29Btrfs: restructure try_release_extent_buffer()Miao Xie
restructure try_release_extent_buffer() and write a function to release the extent buffer. It will be used later. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-10-29Btrfs: use the flusher threads for delalloc throttlingChris Mason
We have a fairly complex set of loops around walking our list of delalloc inodes when we find metadata delalloc space running low. It doesn't work very well, can use large amounts of CPU and doesn't do very efficient writeback. This switches us to kick the bdi flusher threads instead. All dirty data in btrfs is accounted as delalloc data, so this is very similar in terms of what it writes, but we're able to just kick off the IO and wait for progress. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-10-29Btrfs: tune the chunk allocation to 5% of the FS as metadataChris Mason
An earlier commit tried to keep us from allocating too many empty metadata chunks. It was somewhat too restrictive and could lead to ENOSPC errors on empty filesystems. This increases the limits to about 5% of the FS size, allowing more metadata chunks to be preallocated. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-10-29Add new functions for triggering inode writebackChris Mason
When btrfs is running low on metadata space, it needs to force delayed allocation pages to disk. It currently does this with a suboptimal walk of a private list of inodes with delayed allocation, and it would be much better if we used the generic flusher threads. writeback_inodes_sb_if_idle would be ideal, but it waits for the flusher thread to start IO on all the dirty pages in the FS before it returns. This adds variants of writeback_inodes_sb* that allow the caller to control how many pages get sent down. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-10-29Btrfs: don't loop forever on bad btree blocksChris Mason
When btrfs discovers the generation number in a btree block is incorrect, it can loop forever without forcing the RAID code to try a valid mirror, and without returning EIO. This changes things to properly kick out the EIO. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-10-29Merge branch 'bug-fixes' of ↵Chris Mason
git://git.kernel.org/pub/scm/linux/kernel/git/josef/btrfs-work Conflicts: fs/btrfs/extent-tree.c Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-10-29Btrfs: let the user know space caching is enabledJosef Bacik
If you mount -o space_cache, the option will be persistent across mounts, but to make sure the user knows that they did this, emit a message telling them if they didn't mount with -o space_cache but the feature is still used. Signed-off-by: Josef Bacik <josef@redhat.com>
2010-10-29Btrfs: Add a clear_cache mount optionJosef Bacik
If something goes wrong with the free space cache we need a way to make sure it's not loaded on mount and that it's cleared for everybody. When you pass the clear_cache option it will make it so all block groups are setup to be cleared, which keeps them from being loaded and then they will be truncated when the transaction is committed. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2010-10-29Btrfs: add support for mixed data+metadata block groupsJosef Bacik
There are just a few things that need to be fixed in the kernel to support mixed data+metadata block groups. Mostly we just need to make sure that if we are using mixed block groups that we continue to allocate mixed block groups as we need them. Also we need to make sure __find_space_info will find our space info if we search for DATA or METADATA only. Tested this with xfstests and it works nicely. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2010-10-29Btrfs: check cache->caching_ctl before returning if caching has startedJosef Bacik
With the free space disk caching we can mark the block group as started with the caching, but we don't have a caching ctl. This can race with anybody else who tries to get the caching ctl before we cache (this is very hard to do btw). So instead check to see if cache->caching_ctl is set, and if not return NULL. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2010-10-29Btrfs: load free space cache if it existsJosef Bacik
This patch actually loads the free space cache if it exists. The only thing that really changes here is that we need to cache the block group if we're going to remove an extent from it. Previously we did not do this since the caching kthread would pick it up. With the on disk cache we don't have this luxury so we need to make sure we read the on disk cache in first, and then remove the extent, that way when the extent is unpinned the free space is added to the block group. This has been tested with all sorts of things. Signed-off-by: Josef Bacik <josef@redhat.com>
2010-10-29Btrfs: write out free space cacheJosef Bacik
This is a simple bit, just dump the free space cache out to our preallocated inode when we're writing out dirty block groups. There are a bunch of changes in inode.c in order to account for special cases. Mostly when we're doing the writeout we're holding trans_mutex, so we need to use the nolock transacation functions. Also we can't do asynchronous completions since the async thread could be blocked on already completed IO waiting for the transaction lock. This has been tested with xfstests and btrfs filesystem balance, as well as my ENOSPC tests. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2010-10-28Btrfs: create special free space cache inodeJosef Bacik
In order to save free space cache, we need an inode to hold the data, and we need a special item to point at the right inode for the right block group. So first, create a special item that will point to the right inode, and the number of extent entries we will have and the number of bitmaps we will have. We truncate and pre-allocate space everytime to make sure it's uptodate. This feature will be turned on as soon as you mount with -o space_cache, however it is safe to boot into old kernels, they will just generate the cache the old fashion way. When you boot back into a newer kernel we will notice that we modified and not the cache and automatically discard the cache. Signed-off-by: Josef Bacik <josef@redhat.com>
2010-10-26Btrfs: remove warn_on from use_block_rsvJosef Bacik
Because btrfs_dirty_inode does a btrfs_join_transaction, it doesn't actually reserve space. It does this so we can try and dirty the inode quickly without having to deal with the ENOSPC problems. But if it does get back ENOSPC it handles it properly. The problem is use_block_rsv does a WARN_ON whenever this case happens, even tho btrfs_dirty_inode takes it into account and actually expects to get -ENOSPC if things are particularly tight. So instead just remove the warning. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2010-10-26Btrfs: set trans to null in reserve_metadata_bytes if we commit the transactionJosef Bacik
btrfs_commit_transaction will free our trans, but because we pass trans to shrink_delalloc we could possibly have a use after free situation. So instead if we commit the transaction, set trans to null and set committed to true so we don't keep trying to commit a transaction. This fixes a panic I could reproduce at will. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-05 13:49:59 +0000