| Age | Commit message (Collapse) | Author |
|---|
|
Unlock mutex after i_flags and i_ctime updates in the EXT2_IOC_SETFLAGS
ioctl.
Use i_mutex in the EXT2_IOC_SETVERSION ioctl to protect i_ctime and
i_generation updates and make the ioctl consistent since i_mutex is
also used in other places to protect timestamps and inode changes.
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Djalal Harouni <tixxdz@opendz.org>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
When we reach cleanup_journal_tail(), there is no guarantee that
checkpointed buffers are on a stable storage - especially if buffers were
written out by log_do_checkpoint(), they are likely to be only in disk's
caches. Thus when we update journal superblock, effectively removing old
transaction from journal, this write of superblock can get to stable storage
before those checkpointed buffers which can result in filesystem corruption
after a crash.
A similar problem can happen if we replay the journal and wipe it before
flushing disk's caches.
Thus we must unconditionally issue a cache flush before we update journal
superblock in these cases. The fix is slightly complicated by the fact that we
have to get log tail before we issue cache flush but we can store it in the
journal superblock only after the cache flush. Otherwise we risk races where
new tail is written before appropriate cache flush is finished.
I managed to reproduce the corruption using somewhat tweaked Chris Mason's
barrier-test scheduler. Also this should fix occasional reports of 'Bit already
freed' filesystem errors which are totally unreproducible but inspection of
several fs images I've gathered over time points to a problem like this.
CC: stable@kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Since the nlink count will be 0, we need to use set_nlink rather
than inc_nlink in order to avoid triggering the inc_nlink warning
which was added recently.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
Remove unnecessary initializer for a local variable.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
|
|
If the first mounter fails to recover one of the journals
during mount, the mount should fail.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
Previously, a spectator mount would not even attempt to do
journal recovery for a failed node. This meant that if all
mounted nodes were spectators, everyone would be stuck after
a node failed, all waiting for recovery to be performed.
This is unnecessary since the failed node had a clean journal.
Instead, allow a spectator mount to do a partial "read only"
recovery, which means it will check if the failed journal is
clean, and if so, report a successful recovery. If the failed
journal is not clean, it reports that journal recovery failed.
This makes it work the same as a read only mount on a read only
block device.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
In function gfs2_inplace_release it was trying to unlock a gfs2_holder
structure associated with a reservation, after said reservation was
freed. The problem is that the statements have the wrong order.
This patch corrects the order so that the reservation is freed after
the gfs2_holder is unlocked.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This new method of managing recovery is an alternative to
the previous approach of using the userland gfs_controld.
- use dlm slot numbers to assign journal id's
- use dlm recovery callbacks to initiate journal recovery
- use a dlm lock to determine the first node to mount fs
- use a dlm lock to track journals that need recovery
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
autofs4: deal with autofs4_write/autofs4_write races
autofs4: catatonic_mode vs. notify_daemon race
autofs4: autofs4_wait() vs. autofs4_catatonic_mode() race
hfsplus: creation of hidden dir on mount can fail
block_dev: Suppress bdev_cache_init() kmemleak warninig
fix shrink_dcache_parent() livelock
coda: switch coda_cnode_make() to sane API as well, clean coda_lookup()
coda: deal correctly with allocation failure from coda_cnode_makectl()
securityfs: fix object creation races
|
|
Just serialize the actual writing of packets into pipe on
a new mutex, independent from everything else in the locking
hierarchy. As soon as something has started feeding a piece
of packet into the pipe to daemon, we *want* everything else
about to try the same to wait until we are done.
Acked-by: Ian Kent <raven@themaw.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
we need to hold ->wq_mutex while we are forming the packet to send,
lest we have autofs4_catatonic_mode() setting wq->name.name to NULL
just as autofs4_notify_daemon() decides to memcpy() from it...
We do have check for catatonic mode immediately after that (under
->wq_mutex, as it ought to be) and packet won't be actually sent,
but it'll be too late for us if we oops on that memcpy() from NULL...
Fix is obvious - just extend the area covered by ->wq_mutex over
that switch and check whether it's catatonic *before* doing anything
else.
Acked-by: Ian Kent <raven@themaw.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
We need to recheck ->catatonic after autofs4_wait() got ->wq_mutex
for good, or we might end up with wq inserted into queue after
autofs4_catatonic_mode() had done its thing. It will stick there
forever, since there won't be anything to clear its ->name.name.
A bit of a complication: validate_request() drops and regains ->wq_mutex.
It actually ends up the most convenient place to stick the check into...
Acked-by: Ian Kent <raven@themaw.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The correct lock order is uuid_mutex -> volume_mutex -> chunk_mutex,
but when we mount a filesystem which has backing seed devices, we have
this lock chain:
open_ctree()
lock(chunk_mutex);
read_chunk_tree();
read_one_dev();
open_seed_devices();
lock(uuid_mutex);
and then we hit a lockdep splat.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
|
|
A bug was triggered while using seed device:
# mkfs.btrfs /dev/loop1
# btrfstune -S 1 /dev/loop1
# mount -o /dev/loop1 /mnt
# btrfs dev add /dev/loop2 /mnt
btrfs: block rsv returned -28
------------[ cut here ]------------
WARNING: at fs/btrfs/extent-tree.c:5969 btrfs_alloc_free_block+0x166/0x396 [btrfs]()
...
Call Trace:
...
[<f7b7c31c>] btrfs_cow_block+0x101/0x147 [btrfs]
[<f7b7eaa6>] btrfs_search_slot+0x1b8/0x55f [btrfs]
[<f7b7f844>] btrfs_insert_empty_items+0x42/0x7f [btrfs]
[<f7b7f8c1>] btrfs_insert_item+0x40/0x7e [btrfs]
[<f7b8ac02>] btrfs_make_block_group+0x243/0x2aa [btrfs]
[<f7bb3f53>] __btrfs_alloc_chunk+0x672/0x70e [btrfs]
[<f7bb41ff>] init_first_rw_device+0x77/0x13c [btrfs]
[<f7bb5a62>] btrfs_init_new_device+0x664/0x9fd [btrfs]
[<f7bbb65a>] btrfs_ioctl+0x694/0xdbe [btrfs]
[<c04f55f7>] do_vfs_ioctl+0x496/0x4cc
[<c04f5660>] sys_ioctl+0x33/0x4f
[<c07b9edf>] sysenter_do_call+0x12/0x38
---[ end trace 906adac595facc7d ]---
Since seed device is readonly, there's no usable space in the filesystem.
Afterwards we add a sprout device to it, and the kernel creates a METADATA
block group and a SYSTEM block group where comes free space we can reserve,
but we still get revervation failure because the global block_rsv hasn't
been updated accordingly.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
|
|
There are various bugs in block group trimming:
- It may trim from offset smaller than user-specified offset.
- It may trim beyond user-specified range.
- It may leak free space for extents smaller than specified minlen.
- It may truncate the last trimmed extent thus leak free space.
- With mixed extents+bitmaps, some extents may not be trimmed.
- With mixed extents+bitmaps, some bitmaps may not be trimmed (even
none will be trimmed). Even for those trimmed, not all the free space
in the bitmaps will be trimmed.
I rewrite btrfs_trim_block_group() and break it into two functions.
One is to trim extents only, and the other is to trim bitmaps only.
Before patching:
# fstrim -v /mnt/
/mnt/: 1496465408 bytes were trimmed
After patching:
# fstrim -v /mnt/
/mnt/: 2193768448 bytes were trimmed
And this matches the total free space:
# btrfs fi df /mnt
Data: total=3.58GB, used=1.79GB
System, DUP: total=8.00MB, used=4.00KB
System: total=4.00MB, used=0.00
Metadata, DUP: total=205.12MB, used=97.14MB
Metadata: total=8.00MB, used=0.00
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
|
|
For btrfs raid, while discarding a range of space, we'll need to know
the start offset and length to discard for each device, and it's done
in btrfs_map_block().
However the calculation is a bit complex for raid0 and raid10, so I
reimplement it based on a fact that:
dev1 dev2 dev3 (raid0)
-----------------------------------
s0 s3 s6 s1 s4 s7 s2 s5
Each device has (total_stripes / nr_dev) stripes, or plus one.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
|
|
We pre-allocate a btrfs bio with fixed size, and then may re-allocate
memory if we find stripes are bigger than the fixed size. But this
pre-allocation is not necessary.
Also we don't have to calcuate the stripe number twice.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
|
|
Some functions never use the transaction handle passed to them.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
|
|
Check and reserve space for btrfs_update_inode().
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
|
|
We can recover from errors and return -errno to user space.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
|
|
It can return -ENOMEM.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
|
|
If we run into some failure path in io_ctl_prepare_pages(),
io_ctl->pages[] array may have some NULL pointers.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
|
|
I got this while running xfstests:
[24256.836098] block group 317849600 has an wrong amount of free space
[24256.836100] btrfs: failed to load free space cache for block group 317849600
We should clamp the extent returned by find_first_extent_bit(),
so the start of the extent won't smaller than the start of the
block group.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs into for-linus
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux
* 'writeback-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux:
writeback: move MIN_WRITEBACK_PAGES to fs-writeback.c
writeback: balanced_rate cannot exceed write bandwidth
writeback: do strict bdi dirty_exceeded
writeback: avoid tiny dirty poll intervals
writeback: max, min and target dirty pause time
writeback: dirty ratelimit - think time compensation
btrfs: fix dirtied pages accounting on sub-page writes
writeback: fix dirtied pages accounting on redirty
writeback: fix dirtied pages accounting on sub-page writes
writeback: charge leaked page dirties to active tasks
writeback: Include all dirty inodes in background writeback
|
|
Andrew elucidates:
- First installmeant of MM. We have a HUGE number of MM patches this
time. It's crazy.
- MAINTAINERS updates
- backlight updates
- leds
- checkpatch updates
- misc ELF stuff
- rtc updates
- reiserfs
- procfs
- some misc other bits
* akpm: (124 commits)
user namespace: make signal.c respect user namespaces
workqueue: make alloc_workqueue() take printf fmt and args for name
procfs: add hidepid= and gid= mount options
procfs: parse mount options
procfs: introduce the /proc/<pid>/map_files/ directory
procfs: make proc_get_link to use dentry instead of inode
signal: add block_sigmask() for adding sigmask to current->blocked
sparc: make SA_NOMASK a synonym of SA_NODEFER
reiserfs: don't lock root inode searching
reiserfs: don't lock journal_init()
reiserfs: delay reiserfs lock until journal initialization
reiserfs: delete comments referring to the BKL
drivers/rtc/interface.c: fix alarm rollover when day or month is out-of-range
drivers/rtc/rtc-twl.c: add DT support for RTC inside twl4030/twl6030
drivers/rtc/: remove redundant spi driver bus initialization
drivers/rtc/rtc-jz4740.c: make jz4740_rtc_driver static
drivers/rtc/rtc-mc13xxx.c: make mc13xxx_rtc_idtable static
rtc: convert drivers/rtc/* to use module_platform_driver()
drivers/rtc/rtc-wm831x.c: convert to devm_kzalloc()
drivers/rtc/rtc-wm831x.c: remove unused period IRQ handler
...
|
|
Add support for mount options to restrict access to /proc/PID/
directories. The default backward-compatible "relaxed" behaviour is left
untouched.
The first mount option is called "hidepid" and its value defines how much
info about processes we want to be available for non-owners:
hidepid=0 (default) means the old behavior - anybody may read all
world-readable /proc/PID/* files.
hidepid=1 means users may not access any /proc/<pid>/ directories, but
their own. Sensitive files like cmdline, sched*, status are now protected
against other users. As permission checking done in proc_pid_permission()
and files' permissions are left untouched, programs expecting specific
files' modes are not confused.
hidepid=2 means hidepid=1 plus all /proc/PID/ will be invisible to other
users. It doesn't mean that it hides whether a process exists (it can be
learned by other means, e.g. by kill -0 $PID), but it hides process' euid
and egid. It compicates intruder's task of gathering info about running
processes, whether some daemon runs with elevated privileges, whether
another user runs some sensitive program, whether other users run any
program at all, etc.
gid=XXX defines a group that will be able to gather all processes' info
(as in hidepid=0 mode). This group should be used instead of putting
nonroot user in sudoers file or something. However, untrusted users (like
daemons, etc.) which are not supposed to monitor the tasks in the whole
system should not be added to the group.
hidepid=1 or higher is designed to restrict access to procfs files, which
might reveal some sensitive private information like precise keystrokes
timings:
http://www.openwall.com/lists/oss-security/2011/11/05/3
hidepid=1/2 doesn't break monitoring userspace tools. ps, top, pgrep, and
conky gracefully handle EPERM/ENOENT and behave as if the current user is
the only user running processes. pstree shows the process subtree which
contains "pstree" process.
Note: the patch doesn't deal with setuid/setgid issues of keeping
preopened descriptors of procfs files (like
https://lkml.org/lkml/2011/2/7/368). We rely on that the leaked
information like the scheduling counters of setuid apps doesn't threaten
anybody's privacy - only the user started the setuid program may read the
counters.
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Greg KH <greg@kroah.com>
Cc: Theodore Tso <tytso@MIT.EDU>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: James Morris <jmorris@namei.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add support for procfs mount options. Actual mount options are coming in
the next patches.
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Greg KH <greg@kroah.com>
Cc: Theodore Tso <tytso@MIT.EDU>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: James Morris <jmorris@namei.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This one behaves similarly to the /proc/<pid>/fd/ one - it contains
symlinks one for each mapping with file, the name of a symlink is
"vma->vm_start-vma->vm_end", the target is the file. Opening a symlink
results in a file that point exactly to the same inode as them vma's one.
For example the ls -l of some arbitrary /proc/<pid>/map_files/
| lr-x------ 1 root root 64 Aug 26 06:40 7f8f80403000-7f8f80404000 -> /lib64/libc-2.5.so
| lr-x------ 1 root root 64 Aug 26 06:40 7f8f8061e000-7f8f80620000 -> /lib64/libselinux.so.1
| lr-x------ 1 root root 64 Aug 26 06:40 7f8f80826000-7f8f80827000 -> /lib64/libacl.so.1.1.0
| lr-x------ 1 root root 64 Aug 26 06:40 7f8f80a2f000-7f8f80a30000 -> /lib64/librt-2.5.so
| lr-x------ 1 root root 64 Aug 26 06:40 7f8f80a30000-7f8f80a4c000 -> /lib64/ld-2.5.so
This *helps* checkpointing process in three ways:
1. When dumping a task mappings we do know exact file that is mapped
by particular region. We do this by opening
/proc/$pid/map_files/$address symlink the way we do with file
descriptors.
2. This also helps in determining which anonymous shared mappings are
shared with each other by comparing the inodes of them.
3. When restoring a set of processes in case two of them has a mapping
shared, we map the memory by the 1st one and then open its
/proc/$pid/map_files/$address file and map it by the 2nd task.
Using /proc/$pid/maps for this is quite inconvenient since it brings
repeatable re-reading and reparsing for this text file which slows down
restore procedure significantly. Also as being pointed in (3) it is a way
easier to use top level shared mapping in children as
/proc/$pid/map_files/$address when needed.
[akpm@linux-foundation.org: coding-style fixes]
[gorcunov@openvz.org: make map_files depend on CHECKPOINT_RESTORE]
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Reviewed-by: Vasiliy Kulikov <segoon@openwall.com>
Reviewed-by: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Tejun Heo <tj@kernel.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Prepare the ground for the next "map_files" patch which needs a name of a
link file to analyse.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vasiliy Kulikov <segoon@openwall.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Nothing requires that we lock the filesystem until the root inode is
provided.
Also iget5_locked() triggers a warning because we are holding the
filesystem lock while allocating the inode, which result in a lockdep
suspicion that we have a lock inversion against the reclaim path:
[ 1986.896979] =================================
[ 1986.896990] [ INFO: inconsistent lock state ]
[ 1986.896997] 3.1.1-main #8
[ 1986.897001] ---------------------------------
[ 1986.897007] inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} usage.
[ 1986.897016] kswapd0/16 [HC0[0]:SC0[0]:HE1:SE1] takes:
[ 1986.897023] (&REISERFS_SB(s)->lock){+.+.?.}, at: [<c01f8bd4>] reiserfs_write_lock+0x20/0x2a
[ 1986.897044] {RECLAIM_FS-ON-W} state was registered at:
[ 1986.897050] [<c014a5b9>] mark_held_locks+0xae/0xd0
[ 1986.897060] [<c014aab3>] lockdep_trace_alloc+0x7d/0x91
[ 1986.897068] [<c0190ee0>] kmem_cache_alloc+0x1a/0x93
[ 1986.897078] [<c01e7728>] reiserfs_alloc_inode+0x13/0x3d
[ 1986.897088] [<c01a5b06>] alloc_inode+0x14/0x5f
[ 1986.897097] [<c01a5cb9>] iget5_locked+0x62/0x13a
[ 1986.897106] [<c01e99e0>] reiserfs_fill_super+0x410/0x8b9
[ 1986.897114] [<c01953da>] mount_bdev+0x10b/0x159
[ 1986.897123] [<c01e764d>] get_super_block+0x10/0x12
[ 1986.897131] [<c0195b38>] mount_fs+0x59/0x12d
[ 1986.897138] [<c01a80d1>] vfs_kern_mount+0x45/0x7a
[ 1986.897147] [<c01a83e3>] do_kern_mount+0x2f/0xb0
[ 1986.897155] [<c01a987a>] do_mount+0x5c2/0x612
[ 1986.897163] [<c01a9a72>] sys_mount+0x61/0x8f
[ 1986.897170] [<c044060c>] sysenter_do_call+0x12/0x32
[ 1986.897181] irq event stamp: 7509691
[ 1986.897186] hardirqs last enabled at (7509691): [<c0190f34>] kmem_cache_alloc+0x6e/0x93
[ 1986.897197] hardirqs last disabled at (7509690): [<c0190eea>] kmem_cache_alloc+0x24/0x93
[ 1986.897209] softirqs last enabled at (7508896): [<c01294bd>] __do_softirq+0xee/0xfd
[ 1986.897222] softirqs last disabled at (7508859): [<c01030ed>] do_softirq+0x50/0x9d
[ 1986.897234]
[ 1986.897235] other info that might help us debug this:
[ 1986.897242] Possible unsafe locking scenario:
[ 1986.897244]
[ 1986.897250] CPU0
[ 1986.897254] ----
[ 1986.897257] lock(&REISERFS_SB(s)->lock);
[ 1986.897265] <Interrupt>
[ 1986.897269] lock(&REISERFS_SB(s)->lock);
[ 1986.897276]
[ 1986.897277] *** DEADLOCK ***
[ 1986.897278]
[ 1986.897286] no locks held by kswapd0/16.
[ 1986.897291]
[ 1986.897292] stack backtrace:
[ 1986.897299] Pid: 16, comm: kswapd0 Not tainted 3.1.1-main #8
[ 1986.897306] Call Trace:
[ 1986.897314] [<c0439e76>] ? printk+0xf/0x11
[ 1986.897324] [<c01482d1>] print_usage_bug+0x20e/0x21a
[ 1986.897332] [<c01479b8>] ? print_irq_inversion_bug+0x172/0x172
[ 1986.897341] [<c014855c>] mark_lock+0x27f/0x483
[ 1986.897349] [<c0148d88>] __lock_acquire+0x628/0x1472
[ 1986.897358] [<c0149fae>] lock_acquire+0x47/0x5e
[ 1986.897366] [<c01f8bd4>] ? reiserfs_write_lock+0x20/0x2a
[ 1986.897384] [<c01f8bd4>] ? reiserfs_write_lock+0x20/0x2a
[ 1986.897397] [<c043b5ef>] mutex_lock_nested+0x35/0x26f
[ 1986.897409] [<c01f8bd4>] ? reiserfs_write_lock+0x20/0x2a
[ 1986.897421] [<c01f8bd4>] reiserfs_write_lock+0x20/0x2a
[ 1986.897433] [<c01e2edd>] map_block_for_writepage+0xc9/0x590
[ 1986.897448] [<c01b1706>] ? create_empty_buffers+0x33/0x8f
[ 1986.897461] [<c0121124>] ? get_parent_ip+0xb/0x31
[ 1986.897472] [<c043ef7f>] ? sub_preempt_count+0x81/0x8e
[ 1986.897485] [<c043cae0>] ? _raw_spin_unlock+0x27/0x3d
[ 1986.897496] [<c0121124>] ? get_parent_ip+0xb/0x31
[ 1986.897508] [<c01e355d>] reiserfs_writepage+0x1b9/0x3e7
[ 1986.897521] [<c0173b40>] ? clear_page_dirty_for_io+0xcb/0xde
[ 1986.897533] [<c014a6e3>] ? trace_hardirqs_on_caller+0x108/0x138
[ 1986.897546] [<c014a71e>] ? trace_hardirqs_on+0xb/0xd
[ 1986.897559] [<c0177b38>] shrink_page_list+0x34f/0x5e2
[ 1986.897572] [<c01780a7>] shrink_inactive_list+0x172/0x22c
[ 1986.897585] [<c0178464>] shrink_zone+0x303/0x3b1
[ 1986.897597] [<c043cae0>] ? _raw_spin_unlock+0x27/0x3d
[ 1986.897611] [<c01788c9>] kswapd+0x3b7/0x5f2
The deadlock shouldn't happen since we are doing that allocation in the
mount path, the filesystem is not available for any reclaim. Still the
warning is annoying.
To solve this, acquire the lock later only where we need it, right before
calling reiserfs_read_locked_inode() that wants to lock to walk the tree.
Reported-by: Knut Petersen <Knut_Petersen@t-online.de>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
journal_init() doesn't need the lock since no operation on the filesystem
is involved there. journal_read() and get_list_bitmap() have yet to be
reviewed carefully though before removing the lock there. Just keep the
it around these two calls for safety.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In the mount path, transactions that are made before journal
initialization don't involve the filesystem. We can delay the reiserfs
lock until we play with the journal.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Davidlohr Bueso <dave@gnu.org>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Randomization of PIE load address is hard coded in binfmt_elf.c for X86
and ARM. Create a new Kconfig variable
(CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE) for this and use it instead. Thus
architecture specific policy is pushed out of the generic binfmt_elf.c and
into the architecture Kconfig files.
X86 and ARM Kconfigs are modified to select the new variable so there is
no change in behavior. A follow on patch will select it for MIPS too.
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
oom_score_adj is used for guarding processes from OOM-Killer. One of
problem is that it's inherited at fork(). When a daemon set oom_score_adj
and make children, it's hard to know where the value is set.
This patch adds some tracepoints useful for debugging. This patch adds
3 trace points.
- creating new task
- renaming a task (exec)
- set oom_score_adj
To debug, users need to enable some trace pointer. Maybe filtering is useful as
# EVENT=/sys/kernel/debug/tracing/events/task/
# echo "oom_score_adj != 0" > $EVENT/task_newtask/filter
# echo "oom_score_adj != 0" > $EVENT/task_rename/filter
# echo 1 > $EVENT/enable
# EVENT=/sys/kernel/debug/tracing/events/oom/
# echo 1 > $EVENT/enable
output will be like this.
# grep oom /sys/kernel/debug/tracing/trace
bash-7699 [007] d..3 5140.744510: oom_score_adj_update: pid=7699 comm=bash oom_score_adj=-1000
bash-7699 [007] ...1 5151.818022: task_newtask: pid=7729 comm=bash clone_flags=1200011 oom_score_adj=-1000
ls-7729 [003] ...2 5151.818504: task_rename: pid=7729 oldcomm=bash newcomm=ls oom_score_adj=-1000
bash-7699 [002] ...1 5175.701468: task_newtask: pid=7730 comm=bash clone_flags=1200011 oom_score_adj=-1000
grep-7730 [007] ...2 5175.701993: task_rename: pid=7730 oldcomm=bash newcomm=grep oom_score_adj=-1000
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Tell the page allocator that pages allocated for a buffered write are
expected to become dirty soon.
Signed-off-by: Johannes Weiner <jweiner@redhat.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Shaohua Li <shaohua.li@intel.com>
Cc: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Inode cache pruning indirectly reclaims page-cache by invalidating mapping
pages. Let's account them into reclaim-state to notice this progress in
memory reclaimer.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Ext4 commits for 3.3 merge window
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (32 commits)
ext4: fix undefined behavior in ext4_fill_flex_info()
ext4: make more symbols static
ext4: make local symbol ext4_initxattrs static
jbd2: fix hung processes in jbd2_journal_lock_updates()
ext4: reserve new feature flag codepoints
ext4: Report max_batch_time option correctly
ext4: add missing ext4_resize_end on error paths
ext4: let ext4_group_add() use common code
ext4: let ext4_group_extend() use common code
ext4: add new online resize interface
ext4: add a new function which adds a flex group to a fs
ext4: add a new function which allocates bitmaps and inode tables
ext4: pass verify_reserved_gdb() the number of group decriptors
ext4: add a function which updates the super block during online resizing
ext4: add a function which sets up a block group descriptors of a flex bg
ext4: add a function which sets up group blocks of a flex bg
ext4: add a structure which will be used by 64bit-resize interface
ext4: add a function which adds a new group descriptors to a fs
ext4: add a function which extends a group without checking parameters
ext4: use proper little-endian bitops
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
fs/9p: iattr_valid flags are kernel internal flags map them to 9p values.
fs/9p: We should not allocate a new inode when creating hardlines.
fs/9p: v9fs_stat2inode should update suid/sgid bits.
9p: Reduce object size with CONFIG_NET_9P_DEBUG
fs/9p: check schedule_timeout_interruptible return value
Fix up trivial conflicts in fs/9p/{vfs_inode.c,vfs_inode_dotl.c} due to
debug messages having changed to use p9_debug() on one hand, and the
changes for umode_t on the other.
|
|
* 'nfs-for-3.3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFSv4: Change the default setting of the nfs4_disable_idmapping parameter
NFSv4: Save the owner/group name string when doing open
NFS: Remove pNFS bloat from the generic write path
pnfs-obj: Must return layout on IO error
pnfs-obj: pNFS errors are communicated on iodata->pnfs_error
NFS: Cache state owners after files are closed
NFS: Clean up nfs4_find_state_owners_locked()
NFSv4: include bitmap in nfsv4 get acl data
nfs: fix a minor do_div portability issue
NFSv4.1: cleanup comment and debug printk
NFSv4.1: change nfs4_free_slot parameters for dynamic slots
NFSv4.1: cleanup init and reset of session slot tables
NFSv4.1: fix backchannel slotid off-by-one bug
nfs: fix regression in handling of context= option in NFSv4
NFS - fix recent breakage to NFS error handling.
NFS: Retry mounting NFSROOT
SUNRPC: Clean up the RPCSEC_GSS service ticket requests
|
|
* 'linux-next' of git://git.infradead.org/ubifs-2.6:
UBI: fix use-after-free on error path
UBI: fix missing scrub when there is a bit-flip
UBIFS: Use kmemdup rather than duplicating its implementation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
dlm: add recovery callbacks
dlm: add node slots and generation
dlm: move recovery barrier calls
dlm: convert rsb list to rb_tree
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
MTD pull for 3.3
* tag 'for-linus-3.3' of git://git.infradead.org/mtd-2.6: (113 commits)
mtd: Fix dependency for MTD_DOC200x
mtd: do not use mtd->block_markbad directly
logfs: do not use 'mtd->block_isbad' directly
mtd: introduce mtd_can_have_bb helper
mtd: do not use mtd->suspend and mtd->resume directly
mtd: do not use mtd->lock, unlock and is_locked directly
mtd: do not use mtd->sync directly
mtd: harmonize mtd_writev usage
mtd: do not use mtd->lock_user_prot_reg directly
mtd: mtd->write_user_prot_reg directly
mtd: do not use mtd->read_*_prot_reg directly
mtd: do not use mtd->get_*_prot_info directly
mtd: do not use mtd->read_oob directly
mtd: mtdoops: do not use mtd->panic_write directly
romfs: do not use mtd->get_unmapped_area directly
mtd: do not use mtd->get_unmapped_area directly
mtd: do use mtd->point directly
mtd: introduce mtd_has_oob helper
mtd: mtdcore: export symbols cleanup
mtd: clean-up the default_mtd_writev function
...
Fix up trivial edit/remove conflict in drivers/staging/spectra/lld_mtd.c
|
|
Kmemleak reports the following warning in bdev_cache_init()
[ 0.003738] kmemleak: Object 0xffff880153035200 (size 256):
[ 0.003823] kmemleak: comm "swapper/0", pid 0, jiffies 4294667299
[ 0.003909] kmemleak: min_count = 1
[ 0.003988] kmemleak: count = 0
[ 0.004066] kmemleak: flags = 0x1
[ 0.004144] kmemleak: checksum = 0
[ 0.004224] kmemleak: backtrace:
[ 0.004303] [<ffffffff814755ac>] kmemleak_alloc+0x21/0x3e
[ 0.004446] [<ffffffff811100ba>] kmem_cache_alloc+0xca/0x1dc
[ 0.004592] [<ffffffff811371b1>] alloc_vfsmnt+0x1f/0x198
[ 0.004736] [<ffffffff811375c5>] vfs_kern_mount+0x36/0xd2
[ 0.004879] [<ffffffff8113929a>] kern_mount_data+0x18/0x32
[ 0.005025] [<ffffffff81ab9075>] bdev_cache_init+0x51/0x81
[ 0.005169] [<ffffffff81ab8abf>] vfs_caches_init+0x101/0x10d
[ 0.005313] [<ffffffff81a9bae3>] start_kernel+0x344/0x383
[ 0.005456] [<ffffffff81a9b2a7>] x86_64_start_reservations+0xae/0xb2
[ 0.005602] [<ffffffff81a9b3ad>] x86_64_start_kernel+0x102/0x111
[ 0.005747] [<ffffffffffffffff>] 0xffffffffffffffff
[ 0.008653] kmemleak: Trying to color unknown object at 0xffff880153035220 as Grey
[ 0.008754] Pid: 0, comm: swapper/0 Not tainted 3.3.0-rc0-dbg-04200-g8180888-dirty #888
[ 0.008856] Call Trace:
[ 0.008934] [<ffffffff81118704>] ? find_and_get_object+0x44/0x118
[ 0.009023] [<ffffffff81118fe6>] paint_ptr+0x57/0x8f
[ 0.009109] [<ffffffff81475935>] kmemleak_not_leak+0x23/0x42
[ 0.009195] [<ffffffff81ab9096>] bdev_cache_init+0x72/0x81
[ 0.009282] [<ffffffff81ab8abf>] vfs_caches_init+0x101/0x10d
[ 0.009368] [<ffffffff81a9bae3>] start_kernel+0x344/0x383
[ 0.009466] [<ffffffff81a9b2a7>] x86_64_start_reservations+0xae/0xb2
[ 0.009555] [<ffffffff81a9b140>] ? early_idt_handlers+0x140/0x140
[ 0.009643] [<ffffffff81a9b3ad>] x86_64_start_kernel+0x102/0x111
due to attempt to mark pointer to `struct vfsmount' as a gray object, which
is embedded into `struct mount' returned from alloc_vfsmnt().
Make `bd_mnt' static, avoiding need to tell kmemleak to mark it gray, as
suggested by Al Viro.
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Two (or more) concurrent calls of shrink_dcache_parent() on the same dentry may
cause shrink_dcache_parent() to loop forever.
Here's what appears to happen:
1 - CPU0: select_parent(P) finds C and puts it on dispose list, returns 1
2 - CPU1: select_parent(P) locks P->d_lock
3 - CPU0: shrink_dentry_list() locks C->d_lock
dentry_kill(C) tries to lock P->d_lock but fails, unlocks C->d_lock
4 - CPU1: select_parent(P) locks C->d_lock,
moves C from dispose list being processed on CPU0 to the new
dispose list, returns 1
5 - CPU0: shrink_dentry_list() finds dispose list empty, returns
6 - Goto 2 with CPU0 and CPU1 switched
Basically select_parent() steals the dentry from shrink_dentry_list() and thinks
it found a new one, causing shrink_dentry_list() to think it's making progress
and loop over and over.
One way to trigger this is to make udev calls stat() on the sysfs file while it
is going away.
Having a file in /lib/udev/rules.d/ with only this one rule seems to the trick:
ATTR{vendor}=="0x8086", ATTR{device}=="0x10ca", ENV{PCI_SLOT_NAME}="%k", ENV{MATCHADDR}="$attr{address}", RUN+="/bin/true"
Then execute the following loop:
while true; do
echo -bond0 > /sys/class/net/bonding_masters
echo +bond0 > /sys/class/net/bonding_masters
echo -bond1 > /sys/class/net/bonding_masters
echo +bond1 > /sys/class/net/bonding_masters
done
One fix would be to check all callers and prevent concurrent calls to
shrink_dcache_parent(). But I think a better solution is to stop the
stealing behavior.
This patch adds a new dentry flag that is set when the dentry is added to the
dispose list. The flag is cleared in dentry_lru_del() in case the dentry gets a
new reference just before being pruned.
If the dentry has this flag, select_parent() will skip it and let
shrink_dentry_list() retry pruning it. With select_parent() skipping those
dentries there will not be the appearance of progress (new dentries found) when
there is none, hence shrink_dcache_parent() will not loop forever.
Set the flag is also set in prune_dcache_sb() for consistency as suggested by
Linus.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
CC: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
ceph_mdsc_put_request() can call iput(), which can sleep. Don't do that.
Fixes: #1812
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
Nothing we do here sleeps, so just do it under d_lock and avoid the dget/
dput entirely.
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
moved dereference after BUG_ON
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
|
