summaryrefslogtreecommitdiffstats
path: root/include/asm-blackfin
AgeCommit message (Collapse)Author
2008-04-25[Blackfin] arch: add include/boot .gitignore filesMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-25[Blackfin] arch: Functional power management support: Add support for cpu ↵Michael Hennerich
frequency scaling Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-25[Blackfin] arch: Equalize include files: Add PLL_DIV MasksMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-25[Blackfin] arch: add Blackfin on-chip SIR IrDA driver supportGraf Yang
- add platform device resources in board files - add new bfin_sir.h to each machines Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-25[Blackfin] arch: Update anomaly list.Sonic Zhang
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-24[Blackfin] arch: Clean up the definition and correct the commentary for ↵Robert P. J. Day
current_thread_info(). Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Acked-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-24[Blackfin] arch: define our own BUG() so we can dump the blackfin hardware ↵Mike Frysinger
trace buffer Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-24[Blackfin] arch: Prevent potential Core Hang situationMichael Hennerich
If the new value written to the PLL_CTL or VR_CTL register is the same as the previous value, the PLL wake-up will occur immediately (PLL is already locked), but the core and system clock will be bypassed for the PLL_LOCKCNT duration. For this interval, code will execute at the CLKIN rate instead of at the expected CCLK rate. Software should guard against this condition by comparing the current value to the new value before writing the new value. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-24[Blackfin] arch: Give the DMA base registers a more descriptive nameBernd Schmidt
The DMA base registers are available in a global named "base_addr" for every Blackfin variant. Give this a more descriptive name, and remove duplicate tables from some drivers. Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-24[Blackfin] arch: actually implement get_cycles functionMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-24[Blackfin] arch: remove duplicated prototypes for internal cplb structures ↵Mike Frysinger
from the global blackfin header remove duplicated prototypes for internal cplb structures from the global blackfin header as nothing else should be accessing these Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-24[Blackfin] arch: declare list of peripherals as const since we dont modify ↵Mike Frysinger
the incoming array Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-24[Blackfin] arch: merge ip0x-specific board changesMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-24[Blackfin] arch: Resolve the clash issue of UART defines between blackfin ↵Graf Yang
headers and include/linux/serial_reg. Signed-off-by: Graf Yang <graf.yang@analog.com> Cc: Robin Getz <rgetz@blackfin.uclinux.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-24[Blackfin] arch: This allows XIP to work with FD-PIC.Bernd Schmidt
Previously, init failed to do anything meaningful; it turns out that the reason is that FD-PIC has a readonly data section which can be located in the XIP filesystem, and various address checks in the kernel reject such addresses for syscall arguments. Hence, init's execve ("/bin/sh", ...) failed with error code EFAULT. There's room for improvement here: in case people want to have filesystems on flash rather than in main memory, _access_ok should be modified to allow this. This bug fix is also dedicated to Michael Hennerich. Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-23[Blackfin] arch: __FUNCTION__ is gcc-specific, use __func__Harvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-23[Blackfin] arch: remove unused/incorrect definitionMeihui Fan
Signed-off-by: Meihui Fan <mhfan@hhcn.com> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-23[Blackfin] arch: add support for the rest of the gptimers on the BF54xMeihui Fan
Signed-off-by: Meihui Fan <mhfan@hhcn.com> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-23[Blackfin] arch: fix obvious bfin_write typosMeihui Fan
Signed-off-by: Meihui Fan <mhfan@hhcn.com> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-25[Blackfin] arch: Fix bug - Properly calculate DDR clock.Sonic Zhang
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-23[Blackfin] arch: fix some obvious typos -- some of which prevent SDH ↵Mike Frysinger
building for the BF542 Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-23[Blackfin] arch: relocate MAX_SWITCH_{D,I}_CPLBS from the header to the file ↵Mike Frysinger
where it actually gets used. relocate MAX_SWITCH_{D,I}_CPLBS from the header to the file where it actually gets used. this way when we change CONFIG_MEM_SIZE in our kconfig, we only rebuild one or two files rather than a whole bunch that implicitly include cplb.h. this will also remove the ability to clear the swapcount on the fly, but i really dont think that functionality is important. ultimate goal is for CONFIG_MEM_SIZE to go away and calculate this value on the fly based on what u-boot programmed for us. Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-23[Blackfin] arch: replace implied numbers with real valuesMike Frysinger
replace implied numbers with real values so that strace is able to calculate things automatically ... the numbers are frozen in our ABI, so having them based off other __NR_xxx values really doesnt matter -- no functional changes Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-23[Blackfin] arch: Add dma_map_page and dma_unmap_page stub for MMC SPI compilingBryan Wu
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-23[Blackfin] arch: fix bug - when using trace buffer with CONFIG_MPU enabled.Bernd Schmidt
There were a couple of problems with the way the trace buffer state is saved/restored in assembly. The DEBUG_HWTRACE_SAVE/RESTORE macros save a value to the stack, which is not immediately obvious; the CPLB exception code needed changes to load the correct value of the stack pointer. The other problem is that the SAVE/RESTORE macros weren't pushing and popping the value downwards on the stack, but rather moving it _upwards_, which is of course completely broken. We also need to make sure there's a matching DEBUG_HWTRACE_RESTORE in the error case of the CPLB handler. Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-03-27[Blackfin] arch: remove TWI I2C register accessing helper macros, because we ↵Bryan Wu
moved to use i2c new-style interface Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-03-07[Blackfin] arch: add missing __user marking to ss_sp member of signalstack ↵Mike Frysinger
and a few userspace system functions Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-18include: Remove unnecessary inclusions of asm/semaphore.hMatthew Wilcox
None of these files use any of the functionality promised by asm/semaphore.h. It's possible that they (or some user of them) rely on it dragging in some unrelated header file, but I can't build all these files, so we'll have to fix any build failures as they come up. Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
2008-04-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (58 commits) ide: remove ide_init_default_irq() macro ide: move default IDE ports setup to ide_generic host driver ide: remove obsoleted "idex=noprobe" kernel parameter (take 2) ide: remove needless hwif->irq check from ide_hwif_configure() ide: init hwif->{io_ports,irq} explicitly in legacy VLB host drivers ide: limit legacy VLB host drivers to alpha, x86 and mips cmd640: init hwif->{io_ports,irq} explicitly cmd640: cleanup setup_device_ptrs() ide: add ide-4drives host driver (take 3) ide: remove ppc ifdef from init_ide_data() ide: remove ide_default_io_ctl() macro ide: remove CONFIG_IDE_ARCH_OBSOLETE_INIT ide: add CONFIG_IDE_ARCH_OBSOLETE_DEFAULTS (take 2) ppc/pmac: remove no longer needed IDE quirk ppc: don't include <linux/ide.h> ppc: remove ppc_ide_md ppc/pplus: remove ppc_ide_md.ide_init_hwif hook ppc/sandpoint: remove ppc_ide_md hooks ppc/lopec: remove ppc_ide_md hooks ppc/mpc8xx: remove ppc_ide_md hooks ...
2008-04-18ide: remove ide_default_io_ctl() macroBartlomiej Zolnierkiewicz
It is always == '((base) + 0x206)' if CONFIG_IDE_ARCH_OBSOLETE_DEFAULTS=y and it is not needed otherwise (arm, blackfin, parisc, ppc64, sh, sparc[64]). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-17Generic semaphore implementationMatthew Wilcox
Semaphores are no longer performance-critical, so a generic C implementation is better for maintainability, debuggability and extensibility. Thanks to Peter Zijlstra for fixing the lockdep warning. Thanks to Harvey Harrison for pointing out that the unlikely() was unnecessary. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Acked-by: Ingo Molnar <mingo@elte.hu>
2008-04-02kvm: provide kvm.h for all architecture: fixes headers_installChristian Borntraeger
Currently include/linux/kvm.h is not considered by make headers_install, because Kbuild cannot handle " unifdef-$(CONFIG_FOO) += foo.h. This problem was introduced by commit fb56dbb31c4738a3918db81fd24da732ce3b4ae6 Author: Avi Kivity <avi@qumranet.com> Date: Sun Dec 2 10:50:06 2007 +0200 KVM: Export include/linux/kvm.h only if $ARCH actually supports KVM Currently, make headers_check barfs due to <asm/kvm.h>, which <linux/kvm.h> includes, not existing. Rather than add a zillion <asm/kvm.h>s, export kvm. only if the arch actually supports it. Signed-off-by: Avi Kivity <avi@qumranet.com> which makes this an 2.6.25 regression. One way of solving the issue is to enhance Kbuild, but Avi and David conviced me, that changing headers_install is not the way to go. This patch changes the definition for linux/kvm.h to unifdef-y. If  unifdef-y is used for linux/kvm.h "make headers_check" will fail on all architectures without asm/kvm.h. Therefore, this patch also provides asm/kvm.h on all architectures. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Avi Kivity <avi@qumranet.com> Cc: Sam Ravnborg <sam@ravnborg.org Cc: David Woodhouse <dwmw2@infradead.org> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-05[Blackfin] arch: current_l1_stack_save is a pointer, so use NULL rather than 0Mike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-03-06[Blackfin] arch: to kill syscalls missing warning by adding new timerfd syscallsBryan Wu
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-02-02[Blackfin] serial driver: Add flow control support to bf54xSonic Zhang
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-02-02[Blackfin] serial driver: Fix bug Poll RTS/CTS status in DMA mode as wellSonic Zhang
https://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3858 Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-12-24[Blackfin] serial driver: rework break flood anomaly handling to be more ↵Mike Frysinger
robust/realistic about what we can actually work around Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-12-24[Blackfin] serial driver: fix bug - cache the bits of the LSR on systems ↵Mike Frysinger
where the LSR is read-to-clear Cache the bits of the LSR on systems where the LSR is read-to-clear so that we can safely read the LSR in random places. this fixes older parts where break/framing/parity/overflow was not being detected at all in PIO mode, and this fixes newer parts where break/framing/parity/overflow was being reported all the time without being cleared. Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-02-25[Blackfin] arch: add bfin_clear_PPIx_STATUS() helper funcs like we have for ↵Mike Frysinger
other parts Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-02-25[Blackfin] arch: make sure we have proper description/copyright/license linesMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-02-25[Blackfin] arch: Fix CONFIG_PM support for BF561Michael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-02-25[Blackfin] arch: Cleanup abd Simplify:Michael Hennerich
- Simplify init_arch_irq - Make code more readable - Remove useless SSYNCs - Fix comments Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-02-09Add pgtable_t to remaining nommu architecturesMartin Schwidefsky
The pte_fn_t in include/linux/mm.h make it necessary for all architectures to define a pgtable_t type, even those that do not have an mmu. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-09[Blackfin] arch: import defines for BF547 -- it is just like the BF548, but ↵Mike Frysinger
no CAN Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-02-09[Blackfin] arch: Encourage users to use the spidev character driver: Provide ↵Michael Hennerich
platform support - Enable kernel generic spidev driver for blackfin SPI ADC - spi_adc driver, document and test sample not synced Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-02-02[Blackfin] arch: Enable UART2 and UART3 for bf548Sonic Zhang
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-02-02[Blackfin] arch: remove duplicated definitions of the line discipline ↵Tilman Schmidt
numbers N_* in asm-blackfin/termios.h The definitions of the line discipline numbers N_* have been moved from asm-*/termios.h to linux/tty.h, but the Blackfin architecture has somehow evaded that move. Bring it in line with the others. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-02-02[Blackfin] arch: change the trace buffer control start/stop logic in the ↵Mike Frysinger
exception handlers To save/restore the trace buffer control so that if we take an exception after turning off the trace buffer at a higher level we dont inadvertently turn the trace buffer back on Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-02-09[Blackfin] arch: hook up set_irq_wake in Blackfin's irq codeMichael Hennerich
- Add support for irq_wake on system and gpio interrupts - Remove outdated kernel options - Add option to select default PM mode - Fix various places where SIC_IWRx was only handled partially Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-02-09[Blackfin] arch: Merge BF561 support into ints-priorityMichael Hennerich
Merge single core ints-priority-sc.c and dual core ints-priority-dc.c into one common code ints-priority.c Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-03 12:06:05 +0000