summaryrefslogtreecommitdiffstats
path: root/include/asm-generic
AgeCommit message (Collapse)Author
2012-08-13mutex: Place lock in contended state after fastpath_lock failureWill Deacon
ARM recently moved to asm-generic/mutex-xchg.h for its mutex implementation after the previous implementation was found to be missing some crucial memory barriers. However, this has revealed some problems running hackbench on SMP platforms due to the way in which the MUTEX_SPIN_ON_OWNER code operates. The symptoms are that a bunch of hackbench tasks are left waiting on an unlocked mutex and therefore never get woken up to claim it. This boils down to the following sequence of events: Task A Task B Task C Lock value 0 1 1 lock() 0 2 lock() 0 3 spin(A) 0 4 unlock() 1 5 lock() 0 6 cmpxchg(1,0) 0 7 contended() -1 8 lock() 0 9 spin(C) 0 10 unlock() 1 11 cmpxchg(1,0) 0 12 unlock() 1 At this point, the lock is unlocked, but Task B is in an uninterruptible sleep with nobody to wake it up. This patch fixes the problem by ensuring we put the lock into the contended state if we fail to acquire it on the fastpath, ensuring that any blocked waiters are woken up when the mutex is released. Signed-off-by: Will Deacon <will.deacon@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Chris Mason <chris.mason@fusionio.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: <stable@vger.kernel.org> Reviewed-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-6e9lrw2avczr0617fzl5vqb8@git.kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-07-30Merge branch 'akpm' (Andrew's patch-bomb)Linus Torvalds
Merge Andrew's first set of patches: "Non-MM patches: - lots of misc bits - tree-wide have_clk() cleanups - quite a lot of printk tweaks. I draw your attention to "printk: convert the format for KERN_<LEVEL> to a 2 byte pattern" which looks a bit scary. But afaict it's solid. - backlight updates - lib/ feature work (notably the addition and use of memweight()) - checkpatch updates - rtc updates - nilfs updates - fatfs updates (partial, still waiting for acks) - kdump, proc, fork, IPC, sysctl, taskstats, pps, etc - new fault-injection feature work" * Merge emailed patches from Andrew Morton <akpm@linux-foundation.org>: (128 commits) drivers/misc/lkdtm.c: fix missing allocation failure check lib/scatterlist: do not re-write gfp_flags in __sg_alloc_table() fault-injection: add tool to run command with failslab or fail_page_alloc fault-injection: add selftests for cpu and memory hotplug powerpc: pSeries reconfig notifier error injection module memory: memory notifier error injection module PM: PM notifier error injection module cpu: rewrite cpu-notifier-error-inject module fault-injection: notifier error injection c/r: fcntl: add F_GETOWNER_UIDS option resource: make sure requested range is included in the root range include/linux/aio.h: cpp->C conversions fs: cachefiles: add support for large files in filesystem caching pps: return PTR_ERR on error in device_create taskstats: check nla_reserve() return sysctl: suppress kmemleak messages ipc: use Kconfig options for __ARCH_WANT_[COMPAT_]IPC_PARSE_VERSION ipc: compat: use signed size_t types for msgsnd and msgrcv ipc: allow compat IPC version field parsing if !ARCH_WANT_OLD_COMPAT_IPC ipc: add COMPAT_SHMLBA support ...
2012-07-30c/r: fcntl: add F_GETOWNER_UIDS optionCyrill Gorcunov
When we restore file descriptors we would like them to look exactly as they were at dumping time. With help of fcntl it's almost possible, the missing snippet is file owners UIDs. To be able to read their values the F_GETOWNER_UIDS is introduced. This option is valid iif CONFIG_CHECKPOINT_RESTORE is turned on, otherwise returning -EINVAL. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-30Merge branch 'for-linus-for-3.6-rc1' of ↵Linus Torvalds
git://git.linaro.org/people/mszyprowski/linux-dma-mapping Pull DMA-mapping updates from Marek Szyprowski: "Those patches are continuation of my earlier work. They contains extensions to DMA-mapping framework to remove limitation of the current ARM implementation (like limited total size of DMA coherent/write combine buffers), improve performance of buffer sharing between devices (attributes to skip cpu cache operations or creation of additional kernel mapping for some specific use cases) as well as some unification of the common code for dma_mmap_attrs() and dma_mmap_coherent() functions. All extensions have been implemented and tested for ARM architecture." * 'for-linus-for-3.6-rc1' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping: ARM: dma-mapping: add support for DMA_ATTR_SKIP_CPU_SYNC attribute common: DMA-mapping: add DMA_ATTR_SKIP_CPU_SYNC attribute ARM: dma-mapping: add support for dma_get_sgtable() common: dma-mapping: introduce dma_get_sgtable() function ARM: dma-mapping: add support for DMA_ATTR_NO_KERNEL_MAPPING attribute common: DMA-mapping: add DMA_ATTR_NO_KERNEL_MAPPING attribute common: dma-mapping: add support for generic dma_mmap_* calls ARM: dma-mapping: fix error path for memory allocation failure ARM: dma-mapping: add more sanity checks in arm_dma_mmap() ARM: dma-mapping: remove custom consistent dma region mm: vmalloc: use const void * for caller argument scatterlist: add sg_alloc_table_from_pages function
2012-07-30common: dma-mapping: introduce dma_get_sgtable() functionMarek Szyprowski
This patch adds dma_get_sgtable() function which is required to let drivers to share the buffers allocated by DMA-mapping subsystem. Right now the driver gets a dma address of the allocated buffer and the kernel virtual mapping for it. If it wants to share it with other device (= map into its dma address space) it usually hacks around kernel virtual addresses to get pointers to pages or assumes that both devices share the DMA address space. Both solutions are just hacks for the special cases, which should be avoided in the final version of buffer sharing. To solve this issue in a generic way, a new call to DMA mapping has been introduced - dma_get_sgtable(). It allocates a scatter-list which describes the allocated buffer and lets the driver(s) to use it with other device(s) by calling dma_map_sg() on it. This patch provides a generic implementation based on virt_to_page() call. Architectures which require more sophisticated translation might provide their own get_sgtable() methods. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-07-30common: dma-mapping: add support for generic dma_mmap_* callsMarek Szyprowski
Commit 9adc5374 ('common: dma-mapping: introduce mmap method') added a generic method for implementing mmap user call to dma_map_ops structure. This patch converts ARM and PowerPC architectures (the only providers of dma_mmap_coherent/dma_mmap_writecombine calls) to use this generic dma_map_ops based call and adds a generic cross architecture definition for dma_mmap_attrs, dma_mmap_coherent, dma_mmap_writecombine functions. The generic mmap virt_to_page-based fallback implementation is provided for architectures which don't provide their own implementation for mmap method. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-07-27Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM updates from Russell King: "First ARM push of this merge window, post me coming back from holiday. This is what has been in linux-next for the last few weeks. Not much to say which isn't described by the commit summaries." * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (32 commits) ARM: 7463/1: topology: Update cpu_power according to DT information ARM: 7462/1: topology: factorize the update of sibling masks ARM: 7461/1: topology: Add arch_scale_freq_power function ARM: 7456/1: ptrace: provide separate functions for tracing syscall {entry,exit} ARM: 7455/1: audit: move syscall auditing until after ptrace SIGTRAP handling ARM: 7454/1: entry: don't bother with syscall tracing on ret_from_fork path ARM: 7453/1: audit: only allow syscall auditing for pure EABI userspace ARM: 7452/1: delay: allow timer-based delay implementation to be selected ARM: 7451/1: arch timer: implement read_current_timer and get_cycles ARM: 7450/1: dcache: select DCACHE_WORD_ACCESS for little-endian ARMv6+ CPUs ARM: 7449/1: use generic strnlen_user and strncpy_from_user functions ARM: 7448/1: perf: remove arm_perf_pmu_ids global enumeration ARM: 7447/1: rwlocks: remove unused branch labels from trylock routines ARM: 7446/1: spinlock: use ticket algorithm for ARMv6+ locking implementation ARM: 7445/1: mm: update CONTEXTIDR register to contain PID of current process ARM: 7444/1: kernel: add arch-timer C3STOP feature ARM: 7460/1: remove asm/locks.h ARM: 7439/1: head.S: simplify initial page table mapping ARM: 7437/1: zImage: Allow DTB command line concatenation with ATAG_CMDLINE ARM: 7436/1: Do not map the vectors page as write-through on UP systems ...
2012-07-27Merge branches 'audit', 'delay', 'fixes', 'misc' and 'sta2x11' into for-linusRussell King
2012-07-27Merge branch 'kmap_atomic' of git://github.com/congwang/linuxLinus Torvalds
Pull final kmap_atomic cleanups from Cong Wang: "This should be the final round of cleanup, as the definitions of enum km_type finally get removed from the whole tree. The patches have been in linux-next for a long time." * 'kmap_atomic' of git://github.com/congwang/linux: pipe: remove KM_USER0 from comments vmalloc: remove KM_USER0 from comments feature-removal-schedule.txt: remove kmap_atomic(page, km_type) tile: remove km_type definitions um: remove km_type definitions asm-generic: remove km_type definitions avr32: remove km_type definitions frv: remove km_type definitions powerpc: remove km_type definitions arm: remove km_type definitions highmem: remove the deprecated form of kmap_atomic tile: remove usage of enum km_type frv: remove the second parameter of kmap_atomic_primary() jbd2: remove the second argument of kmap_atomic
2012-07-26Merge branch 'x86-mm-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86/mm changes from Peter Anvin: "The big change here is the patchset by Alex Shi to use INVLPG to flush only the affected pages when we only need to flush a small page range. It also removes the special INVALIDATE_TLB_VECTOR interrupts (32 vectors!) and replace it with an ordinary IPI function call." Fix up trivial conflicts in arch/x86/include/asm/apic.h (added code next to changed line) * 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/tlb: Fix build warning and crash when building for !SMP x86/tlb: do flush_tlb_kernel_range by 'invlpg' x86/tlb: replace INVALIDATE_TLB_VECTOR by CALL_FUNCTION_VECTOR x86/tlb: enable tlb flush range support for x86 mm/mmu_gather: enable tlb flush range in generic mmu_gather x86/tlb: add tlb_flushall_shift knob into debugfs x86/tlb: add tlb_flushall_shift for specific CPU x86/tlb: fall back to flush all when meet a THP large page x86/flush_tlb: try flush_tlb_single one by one in flush_tlb_range x86/tlb_info: get last level TLB entry number of CPU x86: Add read_mostly declaration/definition to variables from smp.h x86: Define early read-mostly per-cpu macros
2012-07-24asm-generic: remove km_type definitionsCong Wang
Signed-off-by: Cong Wang <amwang@redhat.com>
2012-07-06mm: cma: fix condition check when setting global cma areaMarek Szyprowski
dev_set_cma_area incorrectly assigned cma to global area on first call due to incorrect check. This patch fixes this issue. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2012-06-28ARM: 7430/1: sizes.h: move from asm-generic to <linux/sizes.h>Alessandro Rubini
sizes.h is used throughout the AMBA code and drivers, so the header should be available to everyone in order to driver AMBA/PrimeCell peripherals behind a PCI bridge where the host can be any platform (I'm doing it under x86). At this step <asm-generic/sizes.h> includes <linux/sizes.h>, to allow a grace period for both in-tree and out-of-tree drivers. Signed-off-by: Alessandro Rubini <rubini@gnudd.com> Acked-by: Giancarlo Asnaghi <giancarlo.asnaghi@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-06-27mm/mmu_gather: enable tlb flush range in generic mmu_gatherAlex Shi
This patch enabled the tlb flush range support in generic mmu layer. Most of arch has self tlb flush range support, like ARM/IA64 etc. X86 arch has no this support in hardware yet. But another instruction 'invlpg' can implement this function in some degree. So, enable this feather in generic layer for x86 now. and maybe useful for other archs in further. Generic mmu_gather struct is protected by micro HAVE_GENERIC_MMU_GATHER. Other archs that has flush range supported own self mmu_gather struct. So, now this change is safe for them. In future we may unify this struct and related functions on multiple archs. Thanks for Peter Zijlstra time and time reminder for multiple architecture code safe! Signed-off-by: Alex Shi <alex.shi@intel.com> Link: http://lkml.kernel.org/r/1340845344-27557-7-git-send-email-alex.shi@intel.com Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2012-06-27x86/tlb: add tlb_flushall_shift for specific CPUAlex Shi
Testing show different CPU type(micro architectures and NUMA mode) has different balance points between the TLB flush all and multiple invlpg. And there also has cases the tlb flush change has no any help. This patch give a interface to let x86 vendor developers have a chance to set different shift for different CPU type. like some machine in my hands, balance points is 16 entries on Romely-EP; while it is at 8 entries on Bloomfield NHM-EP; and is 256 on IVB mobile CPU. but on model 15 core2 Xeon using invlpg has nothing help. For untested machine, do a conservative optimization, same as NHM CPU. Signed-off-by: Alex Shi <alex.shi@intel.com> Link: http://lkml.kernel.org/r/1340845344-27557-5-git-send-email-alex.shi@intel.com Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2012-06-25bug.h: Fix up CONFIG_BUG=n implicit function declarations.Paul Mundt
Commit 2603efa31a03 ("bug.h: Fix up powerpc build regression") corrected the powerpc build case and extended the __ASSEMBLY__ guards, but it also got caught in pre-processor hell accidentally matching the else case of CONFIG_BUG resulting in the BUG disabled case tripping up on -Werror=implicit-function-declaration. It's not possible to __ASSEMBLY__ guard the entire file as architecture code needs to get at the BUGFLAG_WARNING definition in the GENERIC_BUG case, but the rest of the CONFIG_BUG=y/n case needs to be guarded. Rather than littering endless __ASSEMBLY__ checks in each of the if/else cases we just move the BUGFLAG definitions up under their own GENERIC_BUG test and then shove everything else under one big __ASSEMBLY__ guard. Build tested on all of x86 CONFIG_BUG=y, CONFIG_BUG=n, powerpc (due to it's dependence on BUGFLAG definitions in assembly code), and sh (due to not bringing in linux/kernel.h to satisfy the taint flag definitions used by the generic bug code). Hopefully that's the end of the corner cases and I can abstain from ever having to touch this infernal header ever again. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Tested-by: Fengguang Wu <wfg@linux.intel.com> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-20Merge branch 'akpm' (Andrew's patch-bomb)Linus Torvalds
* emailed from Andrew Morton <akpm@linux-foundation.org>: (21 patches) mm/memblock: fix overlapping allocation when doubling reserved array c/r: prctl: Move PR_GET_TID_ADDRESS to a proper place pidns: find_new_reaper() can no longer switch to init_pid_ns.child_reaper pidns: guarantee that the pidns init will be the last pidns process reaped fault-inject: avoid call to random32() if fault injection is disabled Viresh has moved get_maintainer: Fix --help warning mm/memory.c: fix kernel-doc warnings mm: fix kernel-doc warnings mm: correctly synchronize rss-counters at exit/exec mm, thp: print useful information when mmap_sem is unlocked in zap_pmd_range h8300: use the declarations provided by <asm/sections.h> h8300: fix use of extinct _sbss and _ebss xtensa: use the declarations provided by <asm/sections.h> xtensa: use "test -e" instead of bashism "test -a" xtensa: replace xtensa-specific _f{data,text} by _s{data,text} memcg: fix use_hierarchy css_is_ancestor oops regression mm, oom: fix and cleanup oom score calculations nilfs2: ensure proper cache clearing for gc-inodes thp: avoid atomic64_read in pmd_read_atomic for 32bit PAE ...
2012-06-20thp: avoid atomic64_read in pmd_read_atomic for 32bit PAEAndrea Arcangeli
In the x86 32bit PAE CONFIG_TRANSPARENT_HUGEPAGE=y case while holding the mmap_sem for reading, cmpxchg8b cannot be used to read pmd contents under Xen. So instead of dealing only with "consistent" pmdvals in pmd_none_or_trans_huge_or_clear_bad() (which would be conceptually simpler) we let pmd_none_or_trans_huge_or_clear_bad() deal with pmdvals where the low 32bit and high 32bit could be inconsistent (to avoid having to use cmpxchg8b). The only guarantee we get from pmd_read_atomic is that if the low part of the pmd was found null, the high part will be null too (so the pmd will be considered unstable). And if the low part of the pmd is found "stable" later, then it means the whole pmd was read atomically (because after a pmd is stable, neither MADV_DONTNEED nor page faults can alter it anymore, and we read the high part after the low part). In the 32bit PAE x86 case, it is enough to read the low part of the pmdval atomically to declare the pmd as "stable" and that's true for THP and no THP, furthermore in the THP case we also have a barrier() that will prevent any inconsistent pmdvals to be cached by a later re-read of the *pmd. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Jonathan Nieder <jrnieder@gmail.com> Cc: Ulrich Obergfell <uobergfe@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Petr Matousek <pmatouse@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Tested-by: Andrew Jones <drjones@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-18bug.h: Fix up powerpc build regression.Paul Mundt
The asm-generic/bug.h __ASSEMBLY__ guarding is completely bogus, which tripped up the powerpc build when the kernel.h include was added: In file included from include/asm-generic/bug.h:5:0, from arch/powerpc/include/asm/bug.h:127, from arch/powerpc/kernel/head_64.S:31: include/linux/kernel.h:44:0: warning: "ALIGN" redefined [enabled by default] include/linux/linkage.h:57:0: note: this is the location of the previous definition include/linux/sysinfo.h: Assembler messages: include/linux/sysinfo.h:7: Error: Unrecognized opcode: `struct' include/linux/sysinfo.h:8: Error: Unrecognized opcode: `__kernel_long_t' Moving the __ASSEMBLY__ guard up and stashing the kernel.h include under it fixes this up, as well as covering the case the original fix was attempting to handle. Tested-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-13Merge branches 'sh/urgent', 'sh/core', 'sh/clockevents', 'sh/asm-generic' ↵Paul Mundt
and 'sh/trivial' into sh-fixes-for-linus
2012-06-11bug.h: need linux/kernel.h for TAINT_WARN.Paul Mundt
asm-generic/bug.h uses taint flags that are only defined in linux/kernel.h, resulting in build failures on platforms that don't include linux/kernel.h some other way: arch/sh/include/asm/thread_info.h:172:2: error: 'TAINT_WARN' undeclared (first use in this function) Caused by commit edd63a2763bd ("set_restore_sigmask() is never called without SIGPENDING (and never should be)"). Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-06-01Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs changes from Al Viro. "A lot of misc stuff. The obvious groups: * Miklos' atomic_open series; kills the damn abuse of ->d_revalidate() by NFS, which was the major stumbling block for all work in that area. * ripping security_file_mmap() and dealing with deadlocks in the area; sanitizing the neighborhood of vm_mmap()/vm_munmap() in general. * ->encode_fh() switched to saner API; insane fake dentry in mm/cleancache.c gone. * assorted annotations in fs (endianness, __user) * parts of Artem's ->s_dirty work (jff2 and reiserfs parts) * ->update_time() work from Josef. * other bits and pieces all over the place. Normally it would've been in two or three pull requests, but signal.git stuff had eaten a lot of time during this cycle ;-/" Fix up trivial conflicts in Documentation/filesystems/vfs.txt (the 'truncate_range' inode method was removed by the VM changes, the VFS update adds an 'update_time()' method), and in fs/btrfs/ulist.[ch] (due to sparse fix added twice, with other changes nearby). * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (95 commits) nfs: don't open in ->d_revalidate vfs: retry last component if opening stale dentry vfs: nameidata_to_filp(): don't throw away file on error vfs: nameidata_to_filp(): inline __dentry_open() vfs: do_dentry_open(): don't put filp vfs: split __dentry_open() vfs: do_last() common post lookup vfs: do_last(): add audit_inode before open vfs: do_last(): only return EISDIR for O_CREAT vfs: do_last(): check LOOKUP_DIRECTORY vfs: do_last(): make ENOENT exit RCU safe vfs: make follow_link check RCU safe vfs: do_last(): use inode variable vfs: do_last(): inline walk_component() vfs: do_last(): make exit RCU safe vfs: split do_lookup() Btrfs: move over to use ->update_time fs: introduce inode operation ->update_time reiserfs: get rid of resierfs_sync_super reiserfs: mark the superblock as dirty a bit later ...
2012-05-31Merge branch 'akpm' (Andrew's patch-bomb)Linus Torvalds
Merge misc patches from Andrew Morton: - the "misc" tree - stuff from all over the map - checkpatch updates - fatfs - kmod changes - procfs - cpumask - UML - kexec - mqueue - rapidio - pidns - some checkpoint-restore feature work. Reluctantly. Most of it delayed a release. I'm still rather worried that we don't have a clear roadmap to completion for this work. * emailed from Andrew Morton <akpm@linux-foundation.org>: (78 patches) kconfig: update compression algorithm info c/r: prctl: add ability to set new mm_struct::exe_file c/r: prctl: extend PR_SET_MM to set up more mm_struct entries c/r: procfs: add arg_start/end, env_start/end and exit_code members to /proc/$pid/stat syscalls, x86: add __NR_kcmp syscall fs, proc: introduce /proc/<pid>/task/<tid>/children entry sysctl: make kernel.ns_last_pid control dependent on CHECKPOINT_RESTORE aio/vfs: cleanup of rw_copy_check_uvector() and compat_rw_copy_check_uvector() eventfd: change int to __u64 in eventfd_signal() fs/nls: add Apple NLS pidns: make killed children autoreap pidns: use task_active_pid_ns in do_notify_parent rapidio/tsi721: add DMA engine support rapidio: add DMA engine support for RIO data transfers ipc/mqueue: add rbtree node caching support tools/selftests: add mq_perf_tests ipc/mqueue: strengthen checks on mqueue creation ipc/mqueue: correct mq_attr_ok test ipc/mqueue: improve performance of send/recv selftests: add mq_open_tests ...
2012-05-31vsprintf: further optimize decimal conversionDenys Vlasenko
Previous code was using optimizations which were developed to work well even on narrow-word CPUs (by today's standards). But Linux runs only on 32-bit and wider CPUs. We can use that. First: using 32x32->64 multiply and trivial 32-bit shift, we can correctly divide by 10 much larger numbers, and thus we can print groups of 9 digits instead of groups of 5 digits. Next: there are two algorithms to print larger numbers. One is generic: divide by 1000000000 and repeatedly print groups of (up to) 9 digits. It's conceptually simple, but requires an (unsigned long long) / 1000000000 division. Second algorithm splits 64-bit unsigned long long into 16-bit chunks, manipulates them cleverly and generates groups of 4 decimal digits. It so happens that it does NOT require long long division. If long is > 32 bits, division of 64-bit values is relatively easy, and we will use the first algorithm. If long long is > 64 bits (strange architecture with VERY large long long), second algorithm can't be used, and we again use the first one. Else (if long is 32 bits and long long is 64 bits) we use second one. And third: there is a simple optimization which takes fast path not only for zero as was done before, but for all one-digit numbers. In all tested cases new code is faster than old one, in many cases by 30%, in few cases by more than 50% (for example, on x86-32, conversion of 12345678). Code growth is ~0 in 32-bit case and ~130 bytes in 64-bit case. This patch is based upon an original from Michal Nazarewicz. [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com> Cc: Douglas W Jones <jones@cs.uiowa.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31Merge git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull two small kvm fixes from Avi Kivity: "A build fix for non-kvm archs and a transparent hugepage refcount bugfix on hosts with 4M pages." * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: Export asm-generic/kvm_para.h KVM: MMU: fix huge page adapted on non-PAE host
2012-05-30bury __kernel_nlink_t, make internal nlink_t consistentAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-29mm: pmd_read_atomic: fix 32bit PAE pmd walk vs pmd_populate SMP race conditionAndrea Arcangeli
When holding the mmap_sem for reading, pmd_offset_map_lock should only run on a pmd_t that has been read atomically from the pmdp pointer, otherwise we may read only half of it leading to this crash. PID: 11679 TASK: f06e8000 CPU: 3 COMMAND: "do_race_2_panic" #0 [f06a9dd8] crash_kexec at c049b5ec #1 [f06a9e2c] oops_end at c083d1c2 #2 [f06a9e40] no_context at c0433ded #3 [f06a9e64] bad_area_nosemaphore at c043401a #4 [f06a9e6c] __do_page_fault at c0434493 #5 [f06a9eec] do_page_fault at c083eb45 #6 [f06a9f04] error_code (via page_fault) at c083c5d5 EAX: 01fb470c EBX: fff35000 ECX: 00000003 EDX: 00000100 EBP: 00000000 DS: 007b ESI: 9e201000 ES: 007b EDI: 01fb4700 GS: 00e0 CS: 0060 EIP: c083bc14 ERR: ffffffff EFLAGS: 00010246 #7 [f06a9f38] _spin_lock at c083bc14 #8 [f06a9f44] sys_mincore at c0507b7d #9 [f06a9fb0] system_call at c083becd start len EAX: ffffffda EBX: 9e200000 ECX: 00001000 EDX: 6228537f DS: 007b ESI: 00000000 ES: 007b EDI: 003d0f00 SS: 007b ESP: 62285354 EBP: 62285388 GS: 0033 CS: 0073 EIP: 00291416 ERR: 000000da EFLAGS: 00000286 This should be a longstanding bug affecting x86 32bit PAE without THP. Only archs with 64bit large pmd_t and 32bit unsigned long should be affected. With THP enabled the barrier() in pmd_none_or_trans_huge_or_clear_bad() would partly hide the bug when the pmd transition from none to stable, by forcing a re-read of the *pmd in pmd_offset_map_lock, but when THP is enabled a new set of problem arises by the fact could then transition freely in any of the none, pmd_trans_huge or pmd_trans_stable states. So making the barrier in pmd_none_or_trans_huge_or_clear_bad() unconditional isn't good idea and it would be a flakey solution. This should be fully fixed by introducing a pmd_read_atomic that reads the pmd in order with THP disabled, or by reading the pmd atomically with cmpxchg8b with THP enabled. Luckily this new race condition only triggers in the places that must already be covered by pmd_none_or_trans_huge_or_clear_bad() so the fix is localized there but this bug is not related to THP. NOTE: this can trigger on x86 32bit systems with PAE enabled with more than 4G of ram, otherwise the high part of the pmd will never risk to be truncated because it would be zero at all times, in turn so hiding the SMP race. This bug was discovered and fully debugged by Ulrich, quote: ---- [..] pmd_none_or_trans_huge_or_clear_bad() loads the content of edx and eax. 496 static inline int pmd_none_or_trans_huge_or_clear_bad(pmd_t *pmd) 497 { 498 /* depend on compiler for an atomic pmd read */ 499 pmd_t pmdval = *pmd; // edi = pmd pointer 0xc0507a74 <sys_mincore+548>: mov 0x8(%esp),%edi ... // edx = PTE page table high address 0xc0507a84 <sys_mincore+564>: mov 0x4(%edi),%edx ... // eax = PTE page table low address 0xc0507a8e <sys_mincore+574>: mov (%edi),%eax [..] Please note that the PMD is not read atomically. These are two "mov" instructions where the high order bits of the PMD entry are fetched first. Hence, the above machine code is prone to the following race. - The PMD entry {high|low} is 0x0000000000000000. The "mov" at 0xc0507a84 loads 0x00000000 into edx. - A page fault (on another CPU) sneaks in between the two "mov" instructions and instantiates the PMD. - The PMD entry {high|low} is now 0x00000003fda38067. The "mov" at 0xc0507a8e loads 0xfda38067 into eax. ---- Reported-by: Ulrich Obergfell <uobergfe@redhat.com> Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Petr Matousek <pmatouse@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29KVM: Export asm-generic/kvm_para.hAvi Kivity
Prevents build failures on non-KVM archs. Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-05-26Merge branch 'generic-string-functions'Linus Torvalds
This makes <asm/word-at-a-time.h> actually live up to its promise of allowing architectures to help tune the string functions that do their work a word at a time. David had already taken the x86 strncpy_from_user() function, modified it to work on sparc, and then done the extra work to make it generically useful. This then expands on that work by making x86 use that generic version, completing the circle. But more importantly, it fixes up the word-at-a-time interfaces so that it's now easy to also support things like strnlen_user(), and pretty much most random string functions. David reports that it all works fine on sparc, and Jonas Bonn reported that an earlier version of this worked on OpenRISC too. It's pretty easy for architectures to add support for this and just replace their private versions with the generic code. * generic-string-functions: sparc: use the new generic strnlen_user() function x86: use the new generic strnlen_user() function lib: add generic strnlen_user() function word-at-a-time: make the interfaces truly generic x86: use generic strncpy_from_user routine
2012-05-26word-at-a-time: make the interfaces truly genericLinus Torvalds
This changes the interfaces in <asm/word-at-a-time.h> to be a bit more complicated, but a lot more generic. In particular, it allows us to really do the operations efficiently on both little-endian and big-endian machines, pretty much regardless of machine details. For example, if you can rely on a fast population count instruction on your architecture, this will allow you to make your optimized <asm/word-at-a-time.h> file with that. NOTE! The "generic" version in include/asm-generic/word-at-a-time.h is not truly generic, it actually only works on big-endian. Why? Because on little-endian the generic algorithms are wasteful, since you can inevitably do better. The x86 implementation is an example of that. (The only truly non-generic part of the asm-generic implementation is the "find_zero()" function, and you could make a little-endian version of it. And if the Kbuild infrastructure allowed us to pick a particular header file, that would be lovely) The <asm/word-at-a-time.h> functions are as follows: - WORD_AT_A_TIME_CONSTANTS: specific constants that the algorithm uses. - has_zero(): take a word, and determine if it has a zero byte in it. It gets the word, the pointer to the constant pool, and a pointer to an intermediate "data" field it can set. This is the "quick-and-dirty" zero tester: it's what is run inside the hot loops. - "prep_zero_mask()": take the word, the data that has_zero() produced, and the constant pool, and generate an *exact* mask of which byte had the first zero. This is run directly *outside* the loop, and allows the "has_zero()" function to answer the "is there a zero byte" question without necessarily getting exactly *which* byte is the first one to contain a zero. If you do multiple byte lookups concurrently (eg "hash_name()", which looks for both NUL and '/' bytes), after you've done the prep_zero_mask() phase, the result of those can be or'ed together to get the "either or" case. - The result from "prep_zero_mask()" can then be fed into "find_zero()" (to find the byte offset of the first byte that was zero) or into "zero_bytemask()" (to find the bytemask of the bytes preceding the zero byte). The existence of zero_bytemask() is optional, and is not necessary for the normal string routines. But dentry name hashing needs it, so if you enable DENTRY_WORD_AT_A_TIME you need to expose it. This changes the generic strncpy_from_user() function and the dentry hashing functions to use these modified word-at-a-time interfaces. This gets us back to the optimized state of the x86 strncpy that we lost in the previous commit when moving over to the generic version. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tileLinus Torvalds
Pull tile updates from Chris Metcalf: "These changes cover a range of new arch/tile features and optimizations. They've been through LKML review and on linux-next for a month or so. There's also one bug-fix that just missed 3.4, which I've marked for stable." Fixed up trivial conflict in arch/tile/Kconfig (new added tile Kconfig entries clashing with the generic timer/clockevents changes). * git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: tile: default to tilegx_defconfig for ARCH=tile tile: fix bug where fls(0) was not returning 0 arch/tile: mark TILEGX as not EXPERIMENTAL tile/mm/fault.c: Port OOM changes to handle_page_fault arch/tile: add descriptive text if the kernel reports a bad trap arch/tile: allow querying cpu module information from the hypervisor arch/tile: fix hardwall for tilegx and generalize for idn and ipi arch/tile: support multiple huge page sizes dynamically mm: add new arch_make_huge_pte() method for tile support arch/tile: support kexec() for tilegx arch/tile: support <asm/cachectl.h> header for cacheflush() syscall arch/tile: Allow tilegx to build with either 16K or 64K page size arch/tile: optimize get_user/put_user and friends arch/tile: support building big-endian kernel arch/tile: allow building Linux with transparent huge pages enabled arch/tile: use interrupt critical sections less
2012-05-25arch/tile: allow building Linux with transparent huge pages enabledChris Metcalf
The change adds some infrastructure for managing tile pmd's more generally, using pte_pmd() and pmd_pte() methods to translate pmd values to and from ptes, since on TILEPro a pmd is really just a nested structure holding a pgd (aka pte). Several existing pmd methods are moved into this framework, and a whole raft of additional pmd accessors are defined that are used by the transparent hugepage framework. The tile PTE now has a "client2" bit. The bit is used to indicate a transparent huge page is in the process of being split into subpages. This change also fixes a generic bug where the return value of the generic pmdp_splitting_flush() was incorrect. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-05-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.linaro.org/people/mszyprowski/linux-dma-mapping Pull CMA and ARM DMA-mapping updates from Marek Szyprowski: "These patches contain two major updates for DMA mapping subsystem (mainly for ARM architecture). First one is Contiguous Memory Allocator (CMA) which makes it possible for device drivers to allocate big contiguous chunks of memory after the system has booted. The main difference from the similar frameworks is the fact that CMA allows to transparently reuse the memory region reserved for the big chunk allocation as a system memory, so no memory is wasted when no big chunk is allocated. Once the alloc request is issued, the framework migrates system pages to create space for the required big chunk of physically contiguous memory. For more information one can refer to nice LWN articles: - 'A reworked contiguous memory allocator': http://lwn.net/Articles/447405/ - 'CMA and ARM': http://lwn.net/Articles/450286/ - 'A deep dive into CMA': http://lwn.net/Articles/486301/ - and the following thread with the patches and links to all previous versions: https://lkml.org/lkml/2012/4/3/204 The main client for this new framework is ARM DMA-mapping subsystem. The second part provides a complete redesign in ARM DMA-mapping subsystem. The core implementation has been changed to use common struct dma_map_ops based infrastructure with the recent updates for new dma attributes merged in v3.4-rc2. This allows to use more than one implementation of dma-mapping calls and change/select them on the struct device basis. The first client of this new infractructure is dmabounce implementation which has been completely cut out of the core, common code. The last patch of this redesign update introduces a new, experimental implementation of dma-mapping calls on top of generic IOMMU framework. This lets ARM sub-platform to transparently use IOMMU for DMA-mapping calls if one provides required IOMMU hardware. For more information please refer to the following thread: http://www.spinics.net/lists/arm-kernel/msg175729.html The last patch merges changes from both updates and provides a resolution for the conflicts which cannot be avoided when patches have been applied on the same files (mainly arch/arm/mm/dma-mapping.c)." Acked by Andrew Morton <akpm@linux-foundation.org>: "Yup, this one please. It's had much work, plenty of review and I think even Russell is happy with it." * 'for-linus' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping: (28 commits) ARM: dma-mapping: use PMD size for section unmap cma: fix migration mode ARM: integrate CMA with DMA-mapping subsystem X86: integrate CMA with DMA-mapping subsystem drivers: add Contiguous Memory Allocator mm: trigger page reclaim in alloc_contig_range() to stabilise watermarks mm: extract reclaim code from __alloc_pages_direct_reclaim() mm: Serialize access to min_free_kbytes mm: page_isolation: MIGRATE_CMA isolation functions added mm: mmzone: MIGRATE_CMA migration type added mm: page_alloc: change fallbacks array handling mm: page_alloc: introduce alloc_contig_range() mm: compaction: export some of the functions mm: compaction: introduce isolate_freepages_range() mm: compaction: introduce map_pages() mm: compaction: introduce isolate_migratepages_range() mm: page_alloc: remove trailing whitespace ARM: dma-mapping: add support for IOMMU mapper ARM: dma-mapping: use alloc, mmap, free from dma_ops ARM: dma-mapping: remove redundant code and do the cleanup ... Conflicts: arch/x86/include/asm/dma-mapping.h
2012-05-24Merge branch 'next' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM changes from Avi Kivity: "Changes include additional instruction emulation, page-crossing MMIO, faster dirty logging, preventing the watchdog from killing a stopped guest, module autoload, a new MSI ABI, and some minor optimizations and fixes. Outside x86 we have a small s390 and a very large ppc update. Regarding the new (for kvm) rebaseless workflow, some of the patches that were merged before we switch trees had to be rebased, while others are true pulls. In either case the signoffs should be correct now." Fix up trivial conflicts in Documentation/feature-removal-schedule.txt arch/powerpc/kvm/book3s_segment.S and arch/x86/include/asm/kvm_para.h. I suspect the kvm_para.h resolution ends up doing the "do I have cpuid" check effectively twice (it was done differently in two different commits), but better safe than sorry ;) * 'next' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (125 commits) KVM: make asm-generic/kvm_para.h have an ifdef __KERNEL__ block KVM: s390: onereg for timer related registers KVM: s390: epoch difference and TOD programmable field KVM: s390: KVM_GET/SET_ONEREG for s390 KVM: s390: add capability indicating COW support KVM: Fix mmu_reload() clash with nested vmx event injection KVM: MMU: Don't use RCU for lockless shadow walking KVM: VMX: Optimize %ds, %es reload KVM: VMX: Fix %ds/%es clobber KVM: x86 emulator: convert bsf/bsr instructions to emulate_2op_SrcV_nobyte() KVM: VMX: unlike vmcs on fail path KVM: PPC: Emulator: clean up SPR reads and writes KVM: PPC: Emulator: clean up instruction parsing kvm/powerpc: Add new ioctl to retreive server MMU infos kvm/book3s: Make kernel emulated H_PUT_TCE available for "PR" KVM KVM: PPC: bookehv: Fix r8/r13 storing in level exception handler KVM: PPC: Book3S: Enable IRQs during exit handling KVM: PPC: Fix PR KVM on POWER7 bare metal KVM: PPC: Fix stbux emulation KVM: PPC: bookehv: Use lwz/stw instead of PPC_LL/PPC_STL for 32-bit fields ...
2012-05-24Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
Pull GPIO driver changes from Grant Likely: "Lots of gpio changes, both to core code and drivers. Changes do touch architecture code to remove the need for separate arm/gpio.h includes in most architectures. Some new drivers are added, and a number of gpio drivers are converted to use irq_domains for gpio inputs used as interrupts. Device tree support has been amended to allow multiple gpio_chips to use the same device tree node. Remaining changes are primarily bug fixes." * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6: (33 commits) gpio/generic: initialize basic_mmio_gpio shadow variables properly gpiolib: Remove 'const' from data argument of gpiochip_find() gpio/rc5t583: add gpio driver for RICOH PMIC RC5T583 gpiolib: quiet gpiochip_add boot message noise gpio: mpc8xxx: Prevent NULL pointer deref in demux handler gpio/lpc32xx: Add device tree support gpio: Adjust of_xlate API to support multiple GPIO chips gpiolib: Implement devm_gpio_request_one() gpio-mcp23s08: dbg_show: fix pullup configuration display Add support for TCA6424A gpio/omap: (re)fix wakeups on level-triggered GPIOs gpio/omap: fix broken context restore for non-OFF mode transitions gpio/omap: fix missing check in *_runtime_suspend() gpio/omap: remove cpu_is_omapxxxx() checks from *_runtime_resume() gpio/omap: remove suspend/resume callbacks gpio/omap: remove retrigger variable in gpio_irq_handler gpio/omap: remove saved_wakeup field from struct gpio_bank gpio/omap: remove suspend_wakeup field from struct gpio_bank gpio/omap: remove saved_fallingdetect, saved_risingdetect gpio/omap: remove virtual_irq_start variable ... Conflicts: drivers/gpio/gpio-samsung.c
2012-05-22Merge branch 'perf-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf changes from Ingo Molnar: "Lots of changes: - (much) improved assembly annotation support in perf report, with jump visualization, searching, navigation, visual output improvements and more. - kernel support for AMD IBS PMU hardware features. Notably 'perf record -e cycles:p' and 'perf top -e cycles:p' should work without skid now, like PEBS does on the Intel side, because it takes advantage of IBS transparently. - the libtracevents library: it is the first step towards unifying tracing tooling and perf, and it also gives a tracing library for external tools like powertop to rely on. - infrastructure: various improvements and refactoring of the UI modules and related code - infrastructure: cleanup and simplification of the profiling targets code (--uid, --pid, --tid, --cpu, --all-cpus, etc.) - tons of robustness fixes all around - various ftrace updates: speedups, cleanups, robustness improvements. - typing 'make' in tools/ will now give you a menu of projects to build and a short help text to explain what each does. - ... and lots of other changes I forgot to list. The perf record make bzImage + perf report regression you reported should be fixed." * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (166 commits) tracing: Remove kernel_lock annotations tracing: Fix initial buffer_size_kb state ring-buffer: Merge separate resize loops perf evsel: Create events initially disabled -- again perf tools: Split term type into value type and term type perf hists: Fix callchain ip printf format perf target: Add uses_mmap field ftrace: Remove selecting FRAME_POINTER with FUNCTION_TRACER ftrace/x86: Have x86 ftrace use the ftrace_modify_all_code() ftrace: Make ftrace_modify_all_code() global for archs to use ftrace: Return record ip addr for ftrace_location() ftrace: Consolidate ftrace_location() and ftrace_text_reserved() ftrace: Speed up search by skipping pages by address ftrace: Remove extra helper functions ftrace: Sort all function addresses, not just per page tracing: change CPU ring buffer state from tracing_cpumask tracing: Check return value of tracing_dentry_percpu() ring-buffer: Reset head page before running self test ring-buffer: Add integrity check at end of iter read ring-buffer: Make addition of pages in ring buffer atomic ...
2012-05-22Merge branch 'for-next-arm-dma' into for-linusMarek Szyprowski
Conflicts: arch/arm/Kconfig arch/arm/mm/dma-mapping.c Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2012-05-21Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security subsystem updates from James Morris: "New notable features: - The seccomp work from Will Drewry - PR_{GET,SET}_NO_NEW_PRIVS from Andy Lutomirski - Longer security labels for Smack from Casey Schaufler - Additional ptrace restriction modes for Yama by Kees Cook" Fix up trivial context conflicts in arch/x86/Kconfig and include/linux/filter.h * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (65 commits) apparmor: fix long path failure due to disconnected path apparmor: fix profile lookup for unconfined ima: fix filename hint to reflect script interpreter name KEYS: Don't check for NULL key pointer in key_validate() Smack: allow for significantly longer Smack labels v4 gfp flags for security_inode_alloc()? Smack: recursive tramsmute Yama: replace capable() with ns_capable() TOMOYO: Accept manager programs which do not start with / . KEYS: Add invalidation support KEYS: Do LRU discard in full keyrings KEYS: Permit in-place link replacement in keyring list KEYS: Perform RCU synchronisation on keys prior to key destruction KEYS: Announce key type (un)registration KEYS: Reorganise keys Makefile KEYS: Move the key config into security/keys/Kconfig KEYS: Use the compat keyctl() syscall wrapper on Sparc64 for Sparc32 compat Yama: remove an unused variable samples/seccomp: fix dependencies on arch macros Yama: add additional ptrace scopes ...
2012-05-21Merge tag 'pci-for-3.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI changes from Bjorn Helgaas: - Host bridge cleanups from Yinghai - Disable Bus Master bit on PCI device shutdown (kexec-related) - Stratus ftServer fix - pci_dev_reset() locking fix - IvyBridge graphics erratum workaround * tag 'pci-for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (21 commits) microblaze/PCI: fix "io_offset undeclared" error x86/PCI: only check for spinlock being held in SMP kernels resources: add resource_overlaps() PCI: fix uninitialized variable 'cap_mask' MAINTAINERS: update PCI git tree and patchwork PCI: disable Bus Master on PCI device shutdown PCI: work around IvyBridge internal graphics FLR erratum x86/PCI: fix unused variable warning in amd_bus.c PCI: move mutex locking out of pci_dev_reset function PCI: work around Stratus ftServer broken PCIe hierarchy x86/PCI: merge pcibios_scan_root() and pci_scan_bus_on_node() x86/PCI: dynamically allocate pci_root_info for native host bridge drivers x86/PCI: embed pci_sysdata into pci_root_info on ACPI path x86/PCI: embed name into pci_root_info struct x86/PCI: add host bridge resource release for _CRS path x86/PCI: refactor get_current_resources() PCI: add host bridge release support PCI: add generic device into pci_host_bridge struct PCI: rename pci_host_bridge() to find_pci_root_bridge() x86/PCI: fix memleak with get_current_resources() ...
2012-05-21KVM: make asm-generic/kvm_para.h have an ifdef __KERNEL__ blockPaul Gortmaker
There are two functions in this asm-generic file. Looking at other arch which do not use the generic version, these two fcns are within an #ifdef __KERNEL__ block, so make the generic one consistent with those. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-05-21drivers: add Contiguous Memory AllocatorMarek Szyprowski
The Contiguous Memory Allocator is a set of helper functions for DMA mapping framework that improves allocations of contiguous memory chunks. CMA grabs memory on system boot, marks it with MIGRATE_CMA migrate type and gives back to the system. Kernel is allowed to allocate only movable pages within CMA's managed memory so that it can be used for example for page cache when DMA mapping do not use it. On dma_alloc_from_contiguous() request such pages are migrated out of CMA area to free required contiguous block and fulfill the request. This allows to allocate large contiguous chunks of memory at any time assuming that there is enough free memory available in the system. This code is heavily based on earlier works by Michal Nazarewicz. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Rob Clark <rob.clark@linaro.org> Tested-by: Ohad Ben-Cohen <ohad@wizery.com> Tested-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Tested-by: Robert Nelson <robertcnelson@gmail.com> Tested-by: Barry Song <Baohua.Song@csr.com>
2012-05-21common: add dma_mmap_from_coherent() functionMarek Szyprowski
Add a common helper for dma-mapping core for mapping a coherent buffer to userspace. Reported-by: Subash Patel <subashrp@gmail.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Tested-By: Subash Patel <subash.ramaswamy@linaro.org>
2012-05-21Merge branch 'perf/core' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Fixes for perf/core: - Rename some perf_target methods to avoid double negation, from Namhyung Kim. - Revert change to use per task events with inheritance, from Namhyung Kim. - Events should start disabled till children starts running, from David Ahern. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-18gpiolib: Remove 'const' from data argument of gpiochip_find()Grant Likely
Commit 3d0f7cf0 "gpio: Adjust of_xlate API to support multiple GPIO chips" changed the api of gpiochip_find to drop const from the data parameter of the match hook, but didn't also drop const from data causing a build warning. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-05-18gpio: Adjust of_xlate API to support multiple GPIO chipsGrant Likely
This patch changes the of_xlate API to make it possible for multiple gpio_chips to refer to the same device tree node. This is useful for banked GPIO controllers that use multiple gpio_chips for a single device. With this change the core code will try calling of_xlate on each gpio_chip that references the device_node and will return the gpio number for the first one to return 'true'. Tested-by: Roland Stigge <stigge@antcom.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-05-18gpiolib: Implement devm_gpio_request_one()Mark Brown
Allow drivers to use the modern request and configure idiom together with devres. As with plain gpio_request() and gpio_request_one() we can't implement the old school version in terms of _one() as this would force the explicit selection of a direction in gpio_request() which could break systems if we pick the wrong one. Implementing devm_gpio_request_one() in terms of devm_gpio_request() would needlessly complicate things or lead to duplication from the unmanaged version depending on how it's done. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-05-16ftrace: Sort all function addresses, not just per pageSteven Rostedt
Instead of just sorting the ip's of the functions per ftrace page, sort the entire list before adding them to the ftrace pages. This will allow the bsearch algorithm to be sped up as it can also sort by pages, not just records within a page. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04Merge tag 'v3.4-rc5' into nextJames Morris
Linux 3.4-rc5 Merge to pull in prerequisite change for Smack: 86812bb0de1a3758dc6c7aa01a763158a7c0638a Requested by Casey.
2012-04-30PCI: work around Stratus ftServer broken PCIe hierarchyBjorn Helgaas
A PCIe downstream port is a P2P bridge. Its secondary interface is a link that should lead only to device 0 (unless ARI is enabled)[1], so we don't probe for non-zero device numbers. Some Stratus ftServer systems have a PCIe downstream port (02:00.0) that leads to both an upstream port (03:00.0) and a downstream port (03:01.0), and 03:01.0 has important devices below it: [0000:02]-+-00.0-[03-3c]--+-00.0-[04-09]--... \-01.0-[0a-0d]--+-[USB] +-[NIC] +-... Previously, we didn't enumerate device 03:01.0, so USB and the network didn't work. This patch adds a DMI quirk to scan all device numbers, not just 0, below a downstream port. Based on a patch by Prarit Bhargava. [1] PCIe spec r3.0, sec 7.3.1 CC: Myron Stowe <mstowe@redhat.com> CC: Don Dutile <ddutile@redhat.com> CC: James Paradis <james.paradis@stratus.com> CC: Matthew Wilcox <matthew.r.wilcox@intel.com> CC: Jesse Barnes <jbarnes@virtuousgeek.org> CC: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-04-30asm-generic: Use __BITS_PER_LONG in statfs.hH. Peter Anvin
<asm-generic/statfs.h> is exported to userspace, so using BITS_PER_LONG is invalid. We need to use __BITS_PER_LONG instead. This is kernel bugzilla 43165. Reported-by: H.J. Lu <hjl.tools@gmail.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Link: http://lkml.kernel.org/r/1335465916-16965-1-git-send-email-hpa@linux.intel.com Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: <stable@vger.kernel.org>