summaryrefslogtreecommitdiffstats
path: root/include/asm-x86/pgtable_32.h
AgeCommit message (Collapse)Author
2008-04-17include/asm-x86/pgtable_32.h: checkpatch cleanups - formatting onlyJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17x86: debug pmd_bad()Ingo Molnar
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17x86: redo cded932b75ab0a5f9181eIngo Molnar
redo commit cded932b75ab0a5f9181e. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-11x86: remove quicklistsThomas Gleixner
quicklists cause a serious memory leak on 32-bit x86, as documented at: http://bugzilla.kernel.org/show_bug.cgi?id=9991 the reason is that the quicklist pool is a special-purpose cache that grows out of proportion. It is not accounted for anywhere and users have no way to even realize that it's the quicklists that are causing RAM usage spikes. It was supposed to be a relatively small pool, but as demonstrated by KOSAKI Motohiro, they can grow as large as: Quicklists: 1194304 kB given how much trouble this code has caused historically, and given that Andrew objected to its introduction on x86 (years ago), the best option at this point is to remove them. [ any performance benefits of caching constructed pgds should be implemented in a more generic way (possibly within the page allocator), while still allowing constructed pages to be allocated by other workloads. ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-03Revert "x86: fix pmd_bad and pud_bad to support huge pages"Linus Torvalds
This reverts commit cded932b75ab0a5f9181ee3da34a0a488d1a14fd. Arjan bisected down a boot-time hang to this, saying: ".. it prevents the kernel to finish booting on my (Penryn based) laptop. The boot stops right after freeing the init memory." and while it's not clear exactly what triggers it, at this stage we're better off just reverting it while Ingo tries to figure out what went wrong. Requested-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Hans Rosenfeld <hans.rosenfeld@amd.com> Cc: Nish Aravamudan <nish.aravamudan@gmail.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-29x86: fix pmd_bad and pud_bad to support huge pagesHans Rosenfeld
I recently stumbled upon a problem in the support for huge pages. If a program using huge pages does not explicitly unmap them, they remain mapped (and therefore, are lost) after the program exits. I observed that the free huge page count in /proc/meminfo decreased when running my program, and it did not increase after the program exited. After running the program a few times, no more huge pages could be allocated. The reason for this seems to be that the x86 pmd_bad and pud_bad consider pmd/pud entries having the PSE bit set invalid. I think there is nothing wrong with this bit being set, it just indicates that the lowest level of translation has been reached. This bit has to be (and is) checked after the basic validity of the entry has been checked, like in this fragment from follow_page() in mm/memory.c: if (pmd_none(*pmd) || unlikely(pmd_bad(*pmd))) goto no_page_table; if (pmd_huge(*pmd)) { BUG_ON(flags & FOLL_GET); page = follow_huge_pmd(mm, address, pmd, flags & FOLL_WRITE); goto out; } Note that this code currently doesn't work as intended if the pmd refers to a huge page, the pmd_huge() check can not be reached if the page is huge. Extending pmd_bad() (and, for future 1GB page support, pud_bad()) to allow for the PSE bit being set fixes this. For similar reasons, allowing the NX bit being set is necessary, too. I have seen huge pages having the NX bit set in their pmd entry, which would cause the same problem. Signed-Off-By: Hans Rosenfeld <hans.rosenfeld@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-09x86: construct 32-bit boot time page tables in native format.Ian Campbell
Specifically the boot time page tables in a CONFIG_X86_PAE=y enabled kernel are in PAE format. early_ioremap is updated to use the standard page table accessors. Clear any mappings beyond max_low_pfn from the boot page tables in native_pagetable_setup_start because the initial mappings can extend beyond the range of physical memory and into the vmalloc area. Derived from patches by Eric Biederman and H. Peter Anvin. [ jeremy@goop.org: PAE swapper_pg_dir needs to be page-sized fix ] Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Mika Penttilä <mika.penttila@kolumbus.fi> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-05i386: Resolve dependency of asm-i386/pgtable.h on highmem.hChristoph Lameter
pgtable.h does not include highmem.h but uses various constants from highmem.h. We cannot include highmem.h because highmem.h will in turn include many other include files that also depend on pgtable.h So move the definitions from highmem.h into pgtable.h. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-04x86: add pgtable accessor functions for gbpagesAndi Kleen
Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: use the same pgd_list for PAE and 64-bitJeremy Fitzhardinge
Use a standard list threaded through page->lru for maintaining the pgd list on PAE. This is the same as 64-bit, and seems saner than using a non-standard list via page->index. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: don't special-case pmd allocations as muchJeremy Fitzhardinge
In x86 PAE mode, stop treating pmds as a special case. Previously they were always allocated and freed with the pgd. The modifies the code to be the same as 64-bit mode, where they are allocated on demand. This is a step on the way to unifying 32/64-bit pagetable allocation as much as possible. There is a complicating wart, however. When you install a new reference to a pmd in the pgd, the processor isn't guaranteed to see it unless you reload cr3. Since reloading cr3 also has the side-effect of flushing the tlb, this is an expense that we want to avoid whereever possible. This patch simply avoids reloading cr3 unless the update is to the current pagetable. Later patches will optimise this further. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Andi Kleen <ak@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: William Irwin <wli@holomorphy.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: clean up lookup_address() declarationsThomas Gleixner
Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: remove set_kernel_exec()Andi Kleen
The SMP trampoline always runs in real mode, so making it executable in the page tables doesn't make much sense because it executes before page tables are set up. That was the only user of set_kernel_exec(). Remove set_kernel_exec(). Signed-off-by: Andi Kleen <ak@suse.de> Acked-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: return the page table level in lookup_address()Ingo Molnar
based on this patch from Andi Kleen: | Subject: CPA: Return the page table level in lookup_address() | From: Andi Kleen <ak@suse.de> | | Needed for the next change. | | And change all the callers. and ported it to x86.git. Signed-off-by: Andi Kleen <ak@suse.de> Acked-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: unify zero_page definitionJeremy Fitzhardinge
Move ZERO_PAGE/empty_zero_page to common place. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: pgtable: unify pte accessorsJeremy Fitzhardinge
Make various pte accessors common. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: unify pgtable accessors which use, #2Ingo Molnar
based on: Subject: x86: unify pgtable accessors which use supported_pte_mask From: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86/pgtable: unify pagetable accessors, #6Jeremy Fitzhardinge
Unify functions to test and set bits in pagetable entries. NOP: only moves existing code around, without any change to it. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86/pgtable: unify pagetable accessors, #5Ingo Molnar
reorder. NOP. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86/pgtable: unify pagetable accessors, #4Ingo Molnar
add new ops to 32-bit. based on: Subject: x86/pgtable: unify pagetable accessors From: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86/pgtable: unify pagetable accessors, #3Ingo Molnar
change the pte_mk inlines to the unified format. Non-NOP! based on: Subject: x86/pgtable: unify pagetable accessors From: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86/pgtable: unify pagetable accessors, #2Ingo Molnar
change the pte_dirty/* inlines to the unified format. Non-NOP! based on: Subject: x86/pgtable: unify pagetable accessors From: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: move all asm/pgtable constants into one placeJeremy Fitzhardinge
32 and 64-bit use the same flags for pagetable entries, so make them all common. [ mingo@elte.hu: fixes ] Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: add PWT to NOCACHE flagsIngo Molnar
add PWT bit to NOCACHE flags. No real difference to CPUs, but needed later for PAT. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: put all kern_addr_valid() incarnations to pgtable.hThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-19remove asm/bitops.h includesJiri Slaby
remove asm/bitops.h includes including asm/bitops directly may cause compile errors. don't include it and include linux/bitops instead. next patch will deny including asm header directly. Cc: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17Slab API: remove useless ctor parameter and reorder parametersChristoph Lameter
Slab constructors currently have a flags parameter that is never used. And the order of the arguments is opposite to other slab functions. The object pointer is placed before the kmem_cache pointer. Convert ctor(void *object, struct kmem_cache *s, unsigned long flags) to ctor(struct kmem_cache *s, void *object) throughout the kernel [akpm@linux-foundation.org: coupla fixes] Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-11i386/x86_64: move headers to include/asm-x86Thomas Gleixner
Move the headers to include/asm-x86 and fixup the header install make rules Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>