summaryrefslogtreecommitdiffstats
path: root/include/drm
AgeCommit message (Collapse)Author
2013-09-20Revert "drm: mark context support as a legacy subsystem"Dave Airlie
This reverts commit 7c510133d93dd6f15ca040733ba7b2891ed61fd1. Well looks like not enough digging was done, libdrm_nouveau before 2.4.33 used contexts, 292da616fe1f936ca78a3fa8e1b1b19883e343b6 nouveau: pull in major libdrm rewrite got rid of them, Reported-by: Paul Zimmerman <Paul.Zimmerman@synopsys.com> Reported-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-09-11drm/radeon: add some additional berlin pci idsAlex Deucher
Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-09-10Merge tag 'drm-intel-fixes-2013-09-06' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel into drm-fixes - Early stolen mem reservation from Jesse in x86 boot code. Acked by Ingo and hpa. This was ready much earlier but somehow I've thought it'd go in through x86 trees, hence why this is late. Avoids the pci resource code to plant mmiobars in the middle of stolen mem and other ugliness. - vgaarb improvements from Alex Williamson plus the fix from Ville for the vgacon->fbcon smooth transition "feature". - Render pageflips on ivb/hsw to avoid stalls due to the ring switching when only flipping on the blitter (Chris). - Deadlock fixes around our flush_workqueue which crept back in - lockdep isn't clever enough :( - Shrinker recursion fix from Chris - this is the thing that blew the vma patches from Ben I've taken out of 3.12. - Fixup for the relocation refactoring. Also an igt testcase to make sure we don't break this again. - Pile of smaller fixups all over, shortlog has full details. * tag 'drm-intel-fixes-2013-09-06' of git://people.freedesktop.org/~danvet/drm-intel: (29 commits) drm/i915: Delay disabling of VGA memory until vgacon->fbcon handoff is done drm/i915: try not to lose backlight CBLV precision drm/i915: Confine page flips to BCS on Valleyview drm/i915: Skip stolen region initialisation if none is reserved drm/i915: fix gpu hang vs. flip stall deadlocks drm/i915: Hold an object reference whilst we shrink it drm/i915: fix i9xx_crtc_clock_get for multiplied pixels drm/i915: handle sdvo input pixel multiplier correctly again drm/i915: fix hpd work vs. flush_work in the pageflip code deadlock drm/i915: fix up the relocate_entry refactoring drm/i915: Fix pipe config warnings when dealing with LVDS fixed mode drm/i915: Don't call sg_free_table() if sg_alloc_table() fails i915: Update VGA arbiter support for newer devices vgaarb: Fix VGA decodes changes vgaarb: Don't disable resources that are not owned drm/i915: Pin pages whilst mapping the dma-buf drm/i915: enable trickle feed on Haswell x86: add early quirk for reserving Intel graphics stolen memory v5 drm/i915: split PCI IDs out into i915_drm.h v4 i915_gem: Convert kmem_cache_alloc(...GFP_ZERO) to kmem_cache_zalloc ...
2013-09-05drm/exynos: fimd: replace struct fb_videomode with videomodeAndrzej Hajda
The patch replaces all occurrences of struct fb_videomode by more accurate struct videomode. The change allows to remove mode conversion function and simplifies clock divider calculation. Clock configuration is moved to separate function. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-09-03x86: add early quirk for reserving Intel graphics stolen memory v5Jesse Barnes
Systems with Intel graphics controllers set aside memory exclusively for gfx driver use. This memory is not always marked in the E820 as reserved or as RAM, and so is subject to overlap from E820 manipulation later in the boot process. On some systems, MMIO space is allocated on top, despite the efforts of the "RAM buffer" approach, which simply rounds memory boundaries up to 64M to try to catch space that may decode as RAM and so is not suitable for MMIO. v2: use read_pci_config for 32 bit reads instead of adding a new one (Chris) add gen6 stolen size function (Chris) v3: use a function pointer (Chris) drop gen2 bits (Daniel) v4: call e820_sanitize_map after adding the region v5: fixup comments (Peter) simplify loop (Chris) Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by: H. Peter Anvin <hpa@zytor.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66726 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66844 Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-03drm/i915: split PCI IDs out into i915_drm.h v4Jesse Barnes
For use by userspace (at some point in the future) and other kernel code. v2: move PCI IDs to uabi (Chris) move PCI IDs to drm/ (Dave) v3: fixup Quanta detection - needs to come first (Daniel) v4: fix up PCI match structure init for easier use by userspace (Chris) Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-02drm: Add drm_bridgeSean Paul
This patch adds the notion of a drm_bridge. A bridge is a chained device which hangs off an encoder. The drm driver using the bridge should provide the association between encoder and bridge. Once a bridge is associated with an encoder, it will participate in mode set, and dpms (via the enable/disable hooks). Signed-off-by: Sean Paul <seanpaul@chromium.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-09-02Merge branch 'drm-next-3.12' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-next Alex writes: This is the radeon drm-next request. Big changes include: - support for dpm on CIK parts - support for ASPM on CIK parts - support for berlin GPUs - major ring handling cleanup - remove the old 3D blit code for bo moves in favor of CP DMA or sDMA - lots of bug fixes [airlied: fix up a bunch of conflicts from drm_order removal] * 'drm-next-3.12' of git://people.freedesktop.org/~agd5f/linux: (898 commits) drm/radeon/dpm: make sure dc performance level limits are valid (CI) drm/radeon/dpm: make sure dc performance level limits are valid (BTC-SI) (v2) drm/radeon: gcc fixes for extended dpm tables drm/radeon: gcc fixes for kb/kv dpm drm/radeon: gcc fixes for ci dpm drm/radeon: gcc fixes for si dpm drm/radeon: gcc fixes for ni dpm drm/radeon: gcc fixes for trinity dpm drm/radeon: gcc fixes for sumo dpm drm/radeonn: gcc fixes for rv7xx/eg/btc dpm drm/radeon: gcc fixes for rv6xx dpm drm/radeon: gcc fixes for radeon_atombios.c drm/radeon: enable UVD interrupts on CIK drm/radeon: fix init ordering for r600+ drm/radeon/dpm: only need to reprogram uvd if uvd pg is enabled drm/radeon: check the return value of uvd_v1_0_start in uvd_v1_0_init drm/radeon: split out radeon_uvd_resume from uvd_v4_2_resume radeon kms: fix uninitialised hotplug work usage in r100_irq_process() drm/radeon/audio: set up the sads on DCE3.2 asics drm/radeon: fix handling of variable sized arrays for router objects ... Conflicts: drivers/gpu/drm/i915/i915_dma.c drivers/gpu/drm/i915/i915_gem_dmabuf.c drivers/gpu/drm/i915/intel_pm.c drivers/gpu/drm/radeon/cik.c drivers/gpu/drm/radeon/ni.c drivers/gpu/drm/radeon/r600.c
2013-08-30drm/radeon: add berlin pci idsAlex Deucher
This adds the pci ids for the berlin GPU core. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-08-30drm/edid: add a helper function to extract the speaker allocation data block ↵Alex Deucher
(v3) This adds a helper function to extract the speaker allocation data block from the EDID. This data block describes what speakers are present on the display device. v2: update per Ville Syrjälä's comments v3: fix copy/paste typo in memory allocation Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Rafał Miłecki <zajec5@gmail.com>
2013-08-30drm: Advertise async page flip ability through GETCAP ioctlKeith Packard
Let applications know whether the kernel supports asynchronous page flipping. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-08-30drm: Pass page flip ioctl flags to driverKeith Packard
This lets drivers see the flags requested by the application [airlied: fixup for rcar/imx/msm] Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-08-30drm: Remove the dithering_mode_property fieldDamien Lespiau
Unfortunately, I haven't been thorough enough in: commit ddecb10cf402a8325579f298fd4986a90f33496b Author: Lespiau, Damien <damien.lespiau@intel.com> Date: Tue Aug 20 00:53:04 2013 +0100 drm: Remove drm_mode_create_dithering_property() And forgot to remove the dithering_mode_property member of struct drm_mode_config. Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-08-30drm: implement experimental render nodesDavid Herrmann
Render nodes provide an API for userspace to use non-privileged GPU commands without any running DRM-Master. It is useful for offscreen rendering, GPGPU clients, and normal render clients which do not perform modesetting. Compared to legacy clients, render clients no longer need any authentication to perform client ioctls. Instead, user-space controls render/client access to GPUs via filesystem access-modes on the render-node. Once a render-node was opened, a client has full access to the client/render operations on the GPU. However, no modesetting or ioctls that affect global state are allowed on render nodes. To prevent privilege-escalation, drivers must explicitly state that they support render nodes. They must mark their render-only ioctls as DRM_RENDER_ALLOW so render clients can use them. Furthermore, they must support clients without any attached master. If filesystem access-modes are not enough for fine-grained access control to render nodes (very unlikely, considering the versaitlity of FS-ACLs), you may still fall-back to fd-passing from server to client (which allows arbitrary access-control). However, note that revoking access is currently impossible and unlikely to get implemented. Note: Render clients no longer have any associated DRM-Master as they are supposed to be independent of any server state. DRM core highly depends on file_priv->master to be non-NULL for modesetting/ctx/etc. commands. Therefore, drivers must be very careful to not require DRM-Master if they support DRIVER_RENDER. So far render-nodes are protected by "drm_rnodes". As long as this module-parameter is not set to 1, a driver will not create render nodes. This allows us to experiment with the API a bit before we stabilize it. v2: drop insecure GEM_FLINK to force use of dmabuf Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-30drm: Add a helper to forge HDMI vendor infoframesLespiau, Damien
This can then be used by DRM drivers to setup their vendor infoframes. v2: Fix hmdi typo (Simon Farnsworth) v3: Adapt to the hdmi_vendor_infoframe rename Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-08-30drm: Don't export drm_find_cea_extension() any moreLespiau, Damien
This function is only used inside drm_edid.c. Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-08-29drm: allow open of dynamic off devices.Dave Airlie
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-27drm/vma: add access management helpersDavid Herrmann
The VMA offset manager uses a device-global address-space. Hence, any user can currently map any offset-node they want. They only need to guess the right offset. If we wanted per open-file offset spaces, we'd either need VM_NONLINEAR mappings or multiple "struct address_space" trees. As both doesn't really scale, we implement access management in the VMA manager itself. We use an rb-tree to store open-files for each VMA node. On each mmap call, GEM, TTM or the drivers must check whether the current user is allowed to map this file. We add a separate lock for each node as there is no generic lock available for the caller to protect the node easily. As we currently don't know whether an object may be used for mmap(), we have to do access management for all objects. If it turns out to slow down handle creation/deletion significantly, we can optimize it in several ways: - Most times only a single filp is added per bo so we could use a static "struct file *main_filp" which is checked/added/removed first before we fall back to the rbtree+drm_vma_offset_file. This could be even done lockless with rcu. - Let user-space pass a hint whether mmap() should be supported on the bo and avoid access-management if not. - .. there are probably more ideas once we have benchmarks .. v2: add drm_vma_node_verify_access() helper Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-21drm/prime: Always add exported buffers to the handle cacheDaniel Vetter
... not only when the dma-buf is freshly created. In contrived examples someone else could have exported/imported the dma-buf already and handed us the gem object with a flink name. If such on object gets reexported as a dma_buf we won't have it in the handle cache already, which breaks the guarantee that for dma-buf imports we always hand back an existing handle if there is one. This is exercised by igt/prime_self_import/with_one_bo_two_files Now if we extend the locked sections just a notch more we can also plug th racy buf/handle cache setup in handle_to_fd: If evil userspace races a concurrent gem close against a prime export operation we can end up tearing down the gem handle before the dma buf handle cache is set up. When handle_to_fd gets around to adding the handle to the cache there will be no one left to clean it up, effectily leaking the bo (and the dma-buf, since the handle cache holds a ref on the dma-buf): Thread A Thread B handle_to_fd: lookup gem object from handle creates new dma_buf gem_close on the same handle obj->dma_buf is set, but file priv buf handle cache has no entry obj->handle_count drops to 0 drm_prime_add_buf_handle sets up the handle cache -> We have a dma-buf reference in the handle cache, but since the handle_count of the gem object already dropped to 0 no on will clean it up. When closing the drm device fd we'll hit the WARN_ON in drm_prime_destroy_file_private. The important change is to extend the critical section of the filp->prime.lock to cover the gem handle lookup. This serializes with a concurrent gem handle close. This leak is exercised by igt/prime_self_import/export-vs-gem_close-race Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-21drm/prime: make drm_prime_lookup_buf_handle staticDaniel Vetter
... and move it to the top of the function to avoid a forward declaration. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-21drm/prime: Simplify drm_gem_remove_prime_handlesDaniel Vetter
with the reworking semantics and locking of the obj->dma_buf pointer this pointer is always set as long as there's still a gem handle around and a dma_buf associated with this gem object. Also, the per file-priv lookup-cache for dma-buf importing is also unified between foreign and native objects. Hence we don't need to special case the clean any more and can simply drop the clause which only runs for foreing objects, i.e. with obj->import_attach set. Note that with this change (actually with the previous one to always set up obj->dma_buf even for foreign objects) it is no longer required to set obj->import_attach when importing a foreing object. So update comments accordingly, too. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-21drm/prime: proper locking+refcounting for obj->dma_buf linkDaniel Vetter
The export dma-buf cache is semantically similar to an flink name. So semantically it makes sense to treat it the same and remove the name (i.e. the dma_buf pointer) and its references when the last gem handle disappears. Again we need to be careful, but double so: Not just could someone race and export with a gem close ioctl (so we need to recheck obj->handle_count again when assigning the new name), but multiple exports can also race against each another. This is prevented by holding the dev->object_name_lock across the entire section which touches obj->dma_buf. With the new scheme we also need to reinstate the obj->dma_buf link at import time (in case the only reference userspace has held in-between was through the dma-buf fd and not through any native gem handle). For simplicity we don't check whether it's a native object but unconditionally set up that link - with the new scheme of removing the obj->dma_buf reference when the last handle disappears we can do that. To make it clear that this is not just for exported buffers anymore als rename it from export_dma_buf to dma_buf. To make sure that now one can race a fd_to_handle or handle_to_fd with gem_close we use the same tricks as in flink of extending the dev->object_name_locking critical section. With this change we finally have a guaranteed 1:1 relationship (at least for native objects) between gem objects and dma-bufs, even accounting for races (which can happen since the dma-buf itself holds a reference while in-flight). This prevent igt/prime_self_import/export-vs-gem_close-race from Oopsing the kernel. There is still a leak though since the per-file priv dma-buf/handle cache handling is racy. That will be fixed in a later patch. v2: Remove the bogus dma_buf_put from the export_and_register_object failure path if we've raced with the handle count dropping to 0. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-21drm/gem: completely close gem_open vs. gem_close racesDaniel Vetter
The gem flink name holds a reference onto the object itself, and this self-reference would prevent an flink'ed object from every being freed. To break that loop we remove the flink name when the last userspace handle disappears, i.e. when obj->handle_count reaches 0. Now in gem_open we drop the dev->object_name_lock between the flink name lookup and actually adding the handle. This means a concurrent gem_close of the last handle could result in the flink name getting reaped right inbetween, i.e. Thread 1 Thread 2 gem_open gem_close flink -> obj lookup handle_count drops to 0 remove flink name create_handle handle_count++ If someone now flinks this object again, we'll get a new flink name. We can close this race by removing the lock dropping and making the entire lookup+handle_create sequence atomic. Unfortunately to still be able to share the handle_create logic this requires a handle_create_tail function which drops the lock - we can't hold the object_name_lock while calling into a driver's ->gem_open callback. Note that for flink fixing this race isn't really important, since racing gem_open against gem_close is clearly a userspace bug. And no matter how the race ends, we won't leak any references. But with dma-buf where the userspace dma-buf fd itself is refcounted this is a valid sequence and hence we should fix it. Therefore this patch here is just a warm-up exercise (and for consistency between flink buffer sharing and dma-buf buffer sharing with self-imports). Also note that this extension of the critical section in gem_open protected by dev->object_name_lock only works because it's now a mutex: A spinlock would conflict with the potential memory allocation in idr_preload(). This is exercises by igt/gem_flink_race/flink_name. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-21drm/gem: switch dev->object_name_lock to a mutexDaniel Vetter
I want to wrap the creation of a dma-buf from a gem object in it, so that the obj->export_dma_buf cache can be atomically filled in. Instead of creating a new mutex just for that variable I've figured I can reuse the existing dev->object_name_lock, especially since the new semantics will exactly mirror the flink obj->name already protected by that lock. v2: idr_preload/idr_preload_end is now an atomic section, so need to move the mutex locking outside. [airlied: fix up conflict with patch to make debugfs use lock] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-21drm/gem: make drm_gem_object_handle_unreference_unlocked staticDaniel Vetter
No one outside of drm should use this, the official interfaces are drm_gem_handle_create and drm_gem_handle_delete. The handle refcounting is purely an implementation detail of gem. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-21drm/gem: fix up flink name create raceDaniel Vetter
This is the 2nd attempt, I've always been a bit dissatisified with the tricky nature of the first one: http://lists.freedesktop.org/archives/dri-devel/2012-July/025451.html The issue is that the flink ioctl can race with calling gem_close on the last gem handle. In that case we'll end up with a zero handle count, but an flink name (and it's corresponding reference). Which results in a neat space leak. In my first attempt I've solved this by rechecking the handle count. But fundamentally the issue is that ->handle_count isn't your usual refcount - it can be resurrected from 0 among other things. For those special beasts atomic_t often suggest way more ordering that it actually guarantees. To prevent being tricked by those hairy semantics take the easy way out and simply protect the handle with the existing dev->object_name_lock. With that change implemented it's dead easy to fix the flink vs. gem close reace: When we try to create the name we simply have to check whether there's still officially a gem handle around and if not refuse to create the flink name. Since the handle count decrement and flink name destruction is now also protected by that lock the reace is gone and we can't ever leak the flink reference again. Outside of the drm core only the exynos driver looks at the handle count, and tbh I have no idea why (it's just for debug dmesg output luckily). I've considered inlining the drm_gem_object_handle_free, but I plan to add more name-like things (like the exported dma_buf) to this scheme, so it's clearer to leave the handle freeing in its own function. This is exercised by the new gem_flink_race i-g-t testcase, which on my snb leaks gem objects at a rate of roughly 1k objects/s. v2: Fix up the error path handling in handle_create and make it more robust by simply calling object_handle_unreference. v3: Fix up the handle_unreference logic bug - atomic_dec_and_test retursn 1 for 0. Oops. v4: Squash in inlining of drm_gem_object_handle_reference as suggested by Dave Airlie and add a note that we now have a testcase. Cc: Dave Airlie <airlied@gmail.com> Cc: Inki Dae <inki.dae@samsung.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-21drm: Make drm_get_platform_dev() staticLespiau, Damien
It's only used in drm_platform.c. Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-21drm: Remove unused PCI idsLespiau, Damien
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-21drm: Make drm_fb_cma_describe() staticLespiau, Damien
This function is only used in drm_fb_cma_helper.c. Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-21drm: Remove 2 unused definesLespiau, Damien
These were introduced in the very first DRM commit: commit f453ba0460742ad027ae0c4c7d61e62817b3e7ef Author: Dave Airlie <airlied@redhat.com> Date: Fri Nov 7 14:05:41 2008 -0800 DRM: add mode setting support Add mode setting support to the DRM layer. But are unused. Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-21drm: Make drm_mode_remove() staticLespiau, Damien
It's only used in drm_crtc.c. Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-21drm: Remove drm_mode_list_concat()Lespiau, Damien
The last user was removed in commit 575dc34ee0de867ba83abf25998e0963bff451fa Author: Dave Airlie <airlied@redhat.com> Date: Mon Sep 7 18:43:26 2009 +1000 drm/kms: remove old std mode fallback code. The new code adds modes in the helper, which makes more sense I disliked the non-driver code adding modes. Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-21drm: Remove drm_mode_create_dithering_property()Lespiau, Damien
This was last used by nouveau, replaced by a driver-specific property in: commit de69185573586302ada2e59ba41835df36986277 Author: Ben Skeggs <bskeggs@redhat.com> Date: Mon Oct 17 12:23:41 2011 +1000 drm/nouveau: improve dithering properties, and implement proper auto mode Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-21drm: Remove stale prototypesLespiau, Damien
A few prototypes have been left in the headers, their function friends long gone. Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-19drm: remove procfs code, take 2Daniel Vetter
So almost two years ago I've tried to nuke the procfs code already once before: http://lists.freedesktop.org/archives/dri-devel/2011-October/015707.html The conclusion was that userspace drivers (specifically libdrm device node detection) stopped relying on procfs in 2001. But after some digging it turned out that the drmstat tool in libdrm is still using those files (but only when certain options are set). So we've decided to keep profcs. But I when I've started to dig around again what exactly this tool does I've noticed that it tries to read the "mem", "vm", and "vma" files from procfs. Now as far my git history digging shows "mem" never did anything useful (at least in the version that first showed up in upstream history in 2004) and the file was remove in commit 955b12def42e83287c1bdb1411d99451753c1391 Author: Ben Gamari <bgamari@gmail.com> Date: Tue Feb 17 20:08:49 2009 -0500 drm: Convert proc files to seq_file and introduce debugfs Which means that for over 4 years drmstat has been broken, and no one cared. In my opinion that's proof enough that no one is actually using drmstat, and so that we can savely nuke the procfs support from drm. While at it fix up the error case cleanup for debugfs in drm_get_minor. v2: Fix dates, libdrm stopped relying on procfs for drm node detection in 2001. v3: fixup compilation warning for !CONFIG_DEBUG_FS, reported by Fengguang Wu. Cc: kbuild test robot <fengguang.wu@intel.com> Cc: Dave Airlie <airlied@linux.ie> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-19drm: remove the dma_ioctl special-caseDaniel Vetter
We might as well have a real ioctl function which checks for the callbacks. This seems to be a remnant from back in the days when each drm driver had their own complete ioctl table, with no shared core drm table at all. To make really sure no mis-guided user in a kms driver pops up again explicitly check for that in the new ioctl implementation. v2: Drop the unused variable I've accidentally left in the code, spotted by David Herrmann. Cc: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-19drm: rip out drm_core_has_MTRR checksDaniel Vetter
The new arch_phys_wc_add/del functions do the right thing both with and without MTRR support in the kernel. So we can drop these additional checks. David Herrmann suggest to also kill the DRIVER_USE_MTRR flag since it's now unused, which spurred me to do a bit a better audit of the affected drivers. David helped a lot in that. Quoting our mail discussion: On Wed, Jul 10, 2013 at 5:41 PM, David Herrmann <dh.herrmann@gmail.com> wrote: > On Wed, Jul 10, 2013 at 5:22 PM, Daniel Vetter <daniel.vetter@ffwll.ch> wrote: >> On Wed, Jul 10, 2013 at 3:51 PM, David Herrmann <dh.herrmann@gmail.com> wrote: >>>> -#if __OS_HAS_MTRR >>>> -static inline int drm_core_has_MTRR(struct drm_device *dev) >>>> -{ >>>> - return drm_core_check_feature(dev, DRIVER_USE_MTRR); >>>> -} >>>> -#else >>>> -#define drm_core_has_MTRR(dev) (0) >>>> -#endif >>>> - >>> >>> That was the last user of DRIVER_USE_MTRR (apart from drivers setting >>> it in .driver_features). Any reason to keep it around? >> >> Yeah, I guess we could rip things out. Which will also force me to >> properly audit drivers for the eventual behaviour change this could >> entail (in case there's an x86 driver which did not ask for an mtrr, >> but iirc there isn't). > > david@david-mb ~/dev/kernel/linux $ for i in drivers/gpu/drm/* ; do if > test -d "$i" ; then if ! grep -q USE_MTRR -r $i ; then echo $i ; fi ; > fi ; done > drivers/gpu/drm/exynos > drivers/gpu/drm/gma500 > drivers/gpu/drm/i2c > drivers/gpu/drm/nouveau > drivers/gpu/drm/omapdrm > drivers/gpu/drm/qxl > drivers/gpu/drm/rcar-du > drivers/gpu/drm/shmobile > drivers/gpu/drm/tilcdc > drivers/gpu/drm/ttm > drivers/gpu/drm/udl > drivers/gpu/drm/vmwgfx > david@david-mb ~/dev/kernel/linux $ > > So for x86 gma500,nouveau,qxl,udl,vmwgfx don't set DRIVER_USE_MTRR. > But I cannot tell whether they break if we call arch_phys_wc_add/del, > anyway. At least nouveau seemed to work here, but it doesn't use AGP > or drm_bufs, I guess. Cool, thanks a lot for stitching together the list of drivers to look at. So for real KMS drivers it's the drives responsibility to add an mtrr if it needs one. nouvea, radeon, mgag200, i915 and vmwgfx do that already. Somehow the savage driver also ends up doing that, I have no idea why. Note that gma500 as a pure KMS driver doesn't need MTRR setup since the platforms that it supports all support PAT. So no MTRRs needed to get wc iomappings. The mtrr support in the drm core is all for legacy mappings of garts, framebuffers and registers. All legacy drivers set the USE_MTRR flag, so we're good there. All in all I think we can really just ditch this /endquote v2: Also kill DRIVER_USE_MTRR as suggested by David Herrmann v3: Rebase on top of David Herrmann's agp setup/cleanup changes. Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Andy Lutomirski <luto@amacapital.net> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-19drm/gem: move drm_gem_object_handle_unreference_unlocked into drm_gem.cDaniel Vetter
We have three callers of this function now and it's neither performance critical nor really small. So an inline function feels like overkill and unecessarily separates the different parts of the code. Since all callers of drm_gem_object_handle_free are now in drm_gem.c we can make that static (and remove the unused EXPORT_SYMBOL). To avoid a forward declaration move it (and drm_gem_object_free_bug) up a bit. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-19drm/prime: add a bit of documentation about gem_obj->import_attachDaniel Vetter
Lifetime rules seem to be solid around ->import_attach. So this patch just properly documents them. Note that pointing directly at the attachment might have issues for devices that have multiple struct device *dev parts constituting the logical gpu and so might need multiple attachment points. Similarly for drm devices which don't need a dma attachment at all (like udl). But fixing that up is material for different patches. Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-19drm: use common drm_gem_dmabuf_release in i915/exynos driversDaniel Vetter
Note that this is slightly tricky since both drivers store their native objects in dma_buf->priv. But both also embed the base drm_gem_object at the first position, so the implicit cast is ok. To use the release helper we need to export it, too. Cc: Inki Dae <inki.dae@samsung.com> Cc: Intel Graphics Development <intel-gfx@lists.freedesktop.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-19drm: use ida to allocate connector idsIlia Mirkin
This makes it so that reloading a module does not cause all the connector ids to change, which are user-visible and sometimes used for configuration. Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-19drm/gem: add shmem get/put page helpersRob Clark
Basically just extracting some code duplicated in gma500, omapdrm, udl, and upcoming msm driver. Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-19drm/gem: add drm_gem_create_mmap_offset_size()Rob Clark
Variant of drm_gem_create_mmap_offset() which doesn't make the assumption that virtual size and physical size (obj->size) are the same. This is needed in omapdrm to deal with tiled buffers. And lets us get rid of a duplicated and slightly modified version of drm_gem_create_mmap_offset() in omapdrm. Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-19drm: add flip-work helperRob Clark
A small helper to queue up work to do, from workqueue context, after a flip. Typically useful to defer unreffing buffers that may be read by the display controller until vblank. v1: original v2: wire up docbook + couple docbook fixes Signed-off-by: Rob Clark <robdclark@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-19drm: Remove drm_mode_validate_clocksStéphane Marchesin
This function is unused. Signed-off-by: Stéphane Marchesin <marcheu@chromium.org> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-19drm: remove a bunch of unused #defines from drmP.hDaniel Vetter
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-19drm: rip out a few unused DRIVER flagsDaniel Vetter
The gma500 driver somehow set the DRIVER_IRQ_VBL flag, but since there's no code at all to check for this we can kill it. The other two are completely unused. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-19drm: rip out DRIVER_FB_DMA and related codeDaniel Vetter
No driver ever sets that flag, so good riddance! Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-19drm: remove FASYNC supportDaniel Vetter
So I've stumbled over drm_fasync and wondered what it does. Digging that up is quite a story. First I've had to read up on what this does and ended up being rather bewildered why peopled loved signals so much back in the days that they've created SIGIO just for that ... Then I wondered how this ever works, and what that strange "No-op." comment right above it should mean. After all calling the core fasync helper is pretty obviously not a noop. After reading through the kernels FASYNC implementation I've noticed that signals are only sent out to the processes attached with FASYNC by calling kill_fasync. No merged drm driver has ever done that. After more digging I've found out that the only driver that ever used this is the so called GAMMA driver. I've frankly never heard of such a gpu brand ever before. Now FASYNC seems to not have been the only bad thing with that driver, since Dave Airlie removed it from the drm driver with prejudice: commit 1430163b4bbf7b00367ea1066c1c5fe85dbeefed Author: Dave Airlie <airlied@linux.ie> Date: Sun Aug 29 12:04:35 2004 +0000 Drop GAMMA DRM from a great height ... Long story short, the drm fasync support seems to be doing absolutely nothing. And the only user of it was never merged into the upstream kernel. And we don't need any fops->fasync callback since the fcntl implementation in the kernel already implements the noop case correctly. So stop this particular cargo-cult and rip it all out. v2: Kill drm_fasync assignments in rcar (newly added) and imx drivers (somehow I've missed that one in staging). Also drop the reference in the drm DocBook. ARM compile-fail reported by Rob Clark. v3: Move the removal of dev->buf_asnyc assignment in drm_setup to this patch here. v4: Actually git add ... tsk. Cc: Dave Airlie <airlied@linux.ie> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Rob Clark <robdclark@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-19drm: mark context support as a legacy subsystemDaniel Vetter
So after a lot of digging around in git histories it looks like this has only ever be used by dri1 render clients. Hence we can fully disable the entire thing for modesetting drivers and so greatly reduce the attack surface for potential exploits (or at least tools like trinity ...). Also add the drm_legacy prefix for functions which are called from common code. To further reduce the impact on common code also extract all the ctx release handling into a function (instead of only releasing individual handles) and make ctxbitmap_cleanup return void - it can never fail. Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>