summaryrefslogtreecommitdiffstats
path: root/include/linux/console.h
AgeCommit message (Collapse)Author
2009-03-24vcs: hook sysfs devices into object lifetime instead of "binding"Kay Sievers
During bootup performance tracing I noticed many occurrences of vca* device creation and removal, leading to the usual userspace uevent processing, which are, in this case, rather pointless. A simple test showing the kernel timing (not including all the work userspace has to do), gives us these numbers: $ time for i in `seq 1000`; do echo a > /dev/tty2; done real 0m1.142s user 0m0.015s sys 0m0.540s If we move the hook for the vcs* driver core devices from the tty "binding" to the vc allocation/deallocation, which is what the vcs* devices represent, we get the following numbers: $ time for i in `seq 1000`; do echo a > /dev/tty2; done real 0m0.152s user 0m0.030s sys 0m0.072s Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-29DRM: add mode setting supportDave Airlie
Add mode setting support to the DRM layer. This is a fairly big chunk of work that allows DRM drivers to provide full output control and configuration capabilities to userspace. It was motivated by several factors: - the fb layer's APIs aren't suited for anything but simple configurations - coordination between the fb layer, DRM layer, and various userspace drivers is poor to non-existent (radeonfb excepted) - user level mode setting drivers makes displaying panic & oops messages more difficult - suspend/resume of graphics state is possible in many more configurations with kernel level support This commit just adds the core DRM part of the mode setting APIs. Driver specific commits using these new structure and APIs will follow. Co-authors: Jesse Barnes <jbarnes@virtuousgeek.org>, Jakob Bornecrantz <jakob@tungstengraphics.com> Contributors: Alan Hourihane <alanh@tungstengraphics.com>, Maarten Maathuis <madman2003@gmail.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-05-27xen: Enable console tty by default in domU if it's not a dummyMarkus Armbruster
Without console= arguments on the kernel command line, the first console to register becomes enabled and the preferred console (the one behind /dev/console). This is normally tty (assuming CONFIG_VT_CONSOLE is enabled, which it commonly is). This is okay as long tty is a useful console. But unless we have the PV framebuffer, and it is enabled for this domain, tty0 in domU is merely a dummy. In that case, we want the preferred console to be the Xen console hvc0, and we want it without having to fiddle with the kernel command line. Commit b8c2d3dfbc117dff26058fbac316b8acfc2cb5f7 did that for us. Since we now have the PV framebuffer, we want to enable and prefer tty again, but only when PVFB is enabled. But even then we still want to enable the Xen console as well. Problem: when tty registers, we can't yet know whether the PVFB is enabled. By the time we can know (xenstore is up), the console setup game is over. Solution: enable console tty by default, but keep hvc as the preferred console. Change the preferred console to tty when PVFB probes successfully, unless we've been given console kernel parameters. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-30Basic braille screen reader supportSamuel Thibault
This adds a minimalistic braille screen reader support. This is meant to be used by blind people e.g. on boot failures or when / cannot be mounted etc and thus the userland screen readers can not work. [akpm@linux-foundation.org: fix exports] Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: Jiri Kosina <jikos@jikos.cz> Cc: Dmitry Torokhov <dtor@mail.ru> Acked-by: Alan Cox <alan@redhat.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18serial: turn serial console suspend a boot rather than compile time optionAndres Salomon
Currently, there's a CONFIG_DISABLE_CONSOLE_SUSPEND that allows one to stop the serial console from being suspended when the rest of the machine goes to sleep. This is incredibly useful for debugging power management-related things; however, having it as a compile-time option has proved to be incredibly inconvenient for us (OLPC). There are plenty of times that we want serial console to not suspend, but for the most part we'd like serial console to be suspended. This drops CONFIG_DISABLE_CONSOLE_SUSPEND, and replaces it with a kernel boot parameter (no_console_suspend). By default, the serial console will be suspended along with the rest of the system; by passing 'no_console_suspend' to the kernel during boot, serial console will remain alive during suspend. For now, this is pretty serial console specific; further fixes could be applied to make this work for things like netconsole. Signed-off-by: Andres Salomon <dilinger@debian.org> Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Nigel Cunningham <nigel@suspend2.net> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16vt/vgacon: Check if screen resize request comes from userspaceAntonino A. Daplas
Various console drivers are able to resize the screen via the con_resize() hook. This hook is also visible in userspace via the TIOCWINSZ, VT_RESIZE and VT_RESIZEX ioctl's. One particular utility, SVGATextMode, expects that con_resize() of the VGA console will always return success even if the resulting screen is not compatible with the hardware. However, this particular behavior of the VGA console, as reported in Kernel Bugzilla Bug 7513, can cause undefined behavior if the user starts with a console size larger than 80x25. To work around this problem, add an extra parameter to con_resize(). This parameter is ignored by drivers except for vgacon. If this parameter is non-zero, then the resize request came from a VT_RESIZE or VT_RESIZEX ioctl and vgacon will always return success. If this parameter is zero, vgacon will return -EINVAL if the requested size is not compatible with the hardware. The latter is the more correct behavior. With this change, SVGATextMode should still work correctly while in-kernel and stty resize calls can expect correct behavior from vgacon. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16Remove unnecessary includes of spinlock.h under include/linuxRobert P. J. Day
Remove the obviously unnecessary includes of <linux/spinlock.h> under the include/linux/ directory, and fix the couple errors that are introduced as a result of that. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16serial: convert early_uart to earlycon for 8250Yinghai Lu
Beacuse SERIAL_PORT_DFNS is removed from include/asm-i386/serial.h and include/asm-x86_64/serial.h. the serial8250_ports need to be probed late in serial initializing stage. the console_init=>serial8250_console_init=> register_console=>serial8250_console_setup will return -ENDEV, and console ttyS0 can not be enabled at that time. need to wait till uart_add_one_port in drivers/serial/serial_core.c to call register_console to get console ttyS0. that is too late. Make early_uart to use early_param, so uart console can be used earlier. Make it to be bootconsole with CON_BOOT flag, so can use console handover feature. and it will switch to corresponding normal serial console automatically. new command line will be: console=uart8250,io,0x3f8,9600n8 console=uart8250,mmio,0xff5e0000,115200n8 or earlycon=uart8250,io,0x3f8,9600n8 earlycon=uart8250,mmio,0xff5e0000,115200n8 it will print in very early stage: Early serial console at I/O port 0x3f8 (options '9600n8') console [uart0] enabled later for console it will print: console handover: boot [uart0] -> real [ttyS0] Signed-off-by: <yinghai.lu@sun.com> Cc: Andi Kleen <ak@suse.de> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Gerd Hoffmann <kraxel@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08vt: add color support to the "underline" and "italic" attributesJan Engelhardt
Add color support to the "underline" and "italic" attributes as in OpenBSD/NetBSD-style (vt220) and xterm. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Acked-by: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08enlarge console.nameAndrew Morton
console.name[] is eight chars, but so is "earlyvga". So when we try to print console->name when using earlyvga it runs off the end of the string. Make it bigger. Diagnosed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11[PATCH] drivers/char/vc_screen.c: proper prototypesAdrian Bunk
Add proper prototypes for two functions in drivers/char/vc_screen.c Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2006-10-03[PATCH] vt: proper prototypes for some console functionsAdrian Bunk
This patch adds proper prototypes to header files for three console init functions used on drivers/char/vt.c Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26[PATCH] PM: make it possible to disable console suspendingRafael J. Wysocki
Change suspend_console() so that it waits for all consoles to flush the remaining messages and make it possible to switch the console suspending off with the help of a Kconfig option. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Stefan Seyfried <seife@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26[PATCH] VT binding: Add binding/unbinding support for the VT consoleAntonino A. Daplas
The framebuffer console is now able to dynamically bind and unbind from the VT console layer. Due to the way the VT console layer works, the drivers themselves decide when to bind or unbind. However, it was decided that binding must be controlled, not by the drivers themselves, but by the VT console layer. With this, dynamic binding is possible for all VT console drivers, not just fbcon. Thus, the VT console layer will impose the following to all VT console drivers: - all registered VT console drivers will be entered in a private list - drivers can register themselves to the VT console layer, but they cannot decide when to bind or unbind. (Exception: To maintain backwards compatibility, take_over_console() will automatically bind the driver after registration.) - drivers can remove themselves from the list by unregistering from the VT console layer. A prerequisite for unregistration is that the driver must not be bound. The following functions are new in the vt.c: register_con_driver() - public function, this function adds the VT console driver to an internal list maintained by the VT console bind_con_driver() - private function, it binds the driver to the console take_over_console() is changed to call register_con_driver() followed by a bind_con_driver(). This is the only time drivers can decide when to bind to the VT layer. This is to maintain backwards compatibility. unbind_con_driver() - private function, it unbinds the driver from its console. The vacated consoles will be taken over by the default boot console driver. unregister_con_driver() - public function, removes the driver from the internal list maintained by the VT console. It will only succeed if the driver is currently unbound. con_is_bound() checks if the driver is currently bound or not give_up_console() is just a wrapper to unregister_con_driver(). There are also 3 additional functions meant to be called only by the tty layer for sysfs control: vt_bind() - calls bind_con_driver() vt_unbind() - calls unbind_con_driver() vt_show_drivers() - shows the list of registered drivers Most VT console drivers will continue to work as is, but might have problems when unbinding or binding which should be fixable with minimal changes. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] Make printk work for really early debuggingMichael Ellerman
Currently printk is no use for early debugging because it refuses to actually print anything to the console unless cpu_online(smp_processor_id()) is true. The stated explanation is that console drivers may require per-cpu resources, or otherwise barf, because the system is not yet setup correctly. Fair enough. However some console drivers might be quite happy running early during boot, in fact we have one, and so it'd be nice if printk understood that. So I added a flag (which I would have called CON_BOOT, but that's taken) called CON_ANYTIME, which indicates that a console is happy to be called anytime, even if the cpu is not yet online. Tested on a Power 5 machine, with both a CON_ANYTIME driver and a bogus console driver that BUG()s if called while offline. No problems AFAICT. Built for i386 UP & SMP. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-19Add support for suspending and resuming the whole console subsystemLinus Torvalds
Trying to suspend/resume with console messages flying all around is doomed to failure, when the devices that the messages are trying to go to are being shut down. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!