summaryrefslogtreecommitdiffstats
path: root/include/linux/ieee80211.h
AgeCommit message (Collapse)Author
2008-12-12wireless: Incorrect LEAP authentication algorithm identifier.Senthil Balasubramanian
This patch fixes a regression introduced by "wireless: avoid some net/ieee80211.h vs. linux/ieee80211.h conflicts" LEAP authentication algorithm identifier should be 128. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-25cfg80211/mac80211: Add 802.11d supportLuis R. Rodriguez
This adds country IE parsing to mac80211 and enables its usage within the new regulatory infrastructure in cfg80211. We parse the country IEs only on management beacons for the BSSID you are associated to and disregard the IEs when the country and environment (indoor, outdoor, any) matches the already processed country IE. To avoid following misinformed or outdated APs we build and use a regulatory domain out of the intersection between what the AP provides us on the country IE and what CRDA is aware is allowed on the same country. A secondary device is allowed to follow only the same country IE as it make no sense for two devices on a system to be in two different countries. In the case the AP is using country IEs for an incorrect country the user may help compliance further by setting the regulatory domain before or after the IE is parsed and in that case another intersection will be performed. CONFIG_WIRELESS_OLD_REGULATORY is supported but requires CRDA present. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10mac80211_hwsim: Add support for client PS modeJouni Malinen
This introduces a debugfs file (ieee80211/phy#/hwsim/ps) that can be used to force a simulated radio into power save mode. Following values can be written into this file to change PS mode: 0 = power save disabled (constantly awake) 1 = power save enabled (drop all frames; do not send PS-Poll) 2 = power save enabled (send PS-Poll frames automatically to receive buffered unicast frames); not yet fully implemented 3 = manual PS-Poll trigger (send a single PS-Poll frame) Two different behavior for power save mode processing can be tested: - move between modes 1 and 0 (i.e., receive all buffered frames at a time) - move to mode 1 and use manual PS-Poll frames (write 3 to the 'ps' debugfs file) to fetch power save buffered frames one at a time Mode 2 (automatic PS-Poll) does not yet parse Beacon frames, but eventually, it should take a look at TIM IE and send PS-Poll if a traffic bit is set for our AID. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10wireless: move mesh config length constantJohannes Berg
This is a constant from the 802.11 specification. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31wireless: avoid some net/ieee80211.h vs. linux/ieee80211.h conflictsJohn W. Linville
There is quite a lot of overlap in definitions between these headers... Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31wireless: use individual buffers for printing ssid valuesJohn W. Linville
Also change escape_ssid to print_ssid to match print_mac semantics. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31802.11: clean up/fix HT supportJohannes Berg
This patch cleans up a number of things: * the unusable definition of the HT capabilities/HT information information elements * variable names that are hard to understand * mac80211: move ieee80211_handle_ht to ht.c and remove the unused enable_ht parameter * mac80211: fix bug with MCS rate 32 in ieee80211_handle_ht * mac80211: fix bug with casting the result of ieee80211_bss_get_ie to an information element _contents_ rather than the whole element, add size checking (another out-of-bounds access bug fixed!) * mac80211: remove some unused return values in favour of BUG_ON checking * a few minor other things Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-24mac80211: mesh portal functionality supportYanBo
Currently the mesh code doesn't support bridging mesh point interfaces with wired ethernet or AP to construct an MPP or MAP. This patch adds code to support the "6 address frame format packet" functionality to mesh point interfaces. Now the mesh network can be used as backhaul for end to end communication. Signed-off-by: Li YanBo <dreamfly281@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11mac80211: move some HT code out of mlme.cJohannes Berg
Some of the HT code in mlme.c is misplaced: * constants/definitions belong to the ieee80211.h header * code being used in other modes as well shouldn't be there Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11mac80211: change MIMO_PS to SM_PSTomas Winkler
This patch follows 11n spec naming more rigorously replacing MIMO_PS with SM_PS (Spatial Multiplexing Power Save). (Originally submitted as 4 patches, "mac80211: change MIMO_PS to SM_PS", "iwlwifi: change MIMO_PS to SM_PS", "ath9k: change MIMO_PS to SM_PS", and "iwlwifi: remove double definition of SM PS". -- JWL) Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29mac80211: Add an 802.11n definitionSujith
This patch adds a HT Capability (DSSS/CCK Mode in 40MHz BSS) definition to ieee80211.h Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-04mac80211: pass dtim_period to low level driverEmmanuel Grumbach
This patch adds the dtim_period in ieee80211_bss_conf, this allows the low level driver to know the dtim_period, and to plan power save accordingly. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08mac80211: move QOS control helpers into ieee80211.hHarvey Harrison
Also remove the WLAN_IS_QOS_DATA inline after removing the last two users. This starts moving away from using rx->fc to using the header frame_control directly. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08mac80211: add block ack request capabilityRon Rindjunsky
This patch adds block ack request capability Signed-off-by: Ester Kummer <ester.kummer@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-26mac80211: 11h - Handling measurement requestAssaf Krauss
This patch handles the 11h measurement request information element. This is minimal requested implementation - refuse measurement. Signed-off-by: Assaf Krauss <assaf.krauss@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-26mac80211: 11h Infrastructure - ParsingAssaf Krauss
This patch introduces parsing of 11h and 11d related elements from incoming management frames. Signed-off-by: Assaf Krauss <assaf.krauss@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14mac80211: remove ieee80211_get_morefragHarvey Harrison
Replaced by the new helper ieee80211_has_morefrags which is more consistent with the intent of the function. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14mac80211: add helpers for frame control testingHarvey Harrison
A few general categories: 1) ieee80211_has_* tests if particular fctl bits are set, the helpers are de in the same order as the fctl defines: A combined _has_a4 was also added to test when both FROMDS and TODS are set. 2) ieee80211_is_* is meant to test whether the frame control is of a certain ftype - data, mgmt, ctl, and two special helpers _is_data_qos, _is_data_pres which also test a subset of the stype space. When testing for a particular stype applicable only to one ftype, functions like ieee80211_is_ack have been added. Note that the ftype is also being checked in these helpers. They have been added for all mgmt and ctl stypes in the same order as the STYPE defines. 3) ieee80211_get_* is meant to take a struct ieee80211_hdr * and returns a pointer to somewhere in the struct, see get_SA, get_DA, get_qos_ctl. The intel wireless drivers had helpers that used this namespace, convert the all to use the new helpers and remove the byteshifting as they were defined in cpu-order rather than little-endian. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14iwlwifi: remove redundant flags regarding to FAT channelEmmanuel Grumbach
This patch removes redundant flags regarding to FAT channel. Use mac80211's flag instead. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03mac80211: allow disable FAT in specific configurationsEmmanuel Grumbach
This patch allows to disable FAT channel in specific configurations. For example the configuration (8, +1), (primary channel 8, extension channel 12) isn't permitted in U.S., but (8, -1), (primary channel 8, extension channel 4) is. When FAT channel configuration is not permitted, FAT channel should be reported as not supported in the capabilities of the HT IE in association request. And sssociation is performed on 20Mhz channel. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21mac80211: separate Tx and Rx MCS when configuring HTRon Rindjunsky
This patch follows the 11n spec in separation between Tx and Rx MCS capabilities. Up until now, when configuring the HT possible set of Tx MCS only Rx MCS were considered, assuming they are the same as the Tx MCS. This patch fixed this by looking at low level driver Tx capabilities. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-14mac80211: remove unnecessary byteshifts in frame control testingHarvey Harrison
Byteswap the constants rather than the frame_control member. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-30mac80211: use 4-byte mesh sequence numberLuis Carlos Cobo
This follows the new 802.11s/D2.0 draft. Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-23mac80211: update mesh EID valuesLuis Carlos Cobo
This patch updates mesh EID values, some of which where conflicting with already-approved 11h EIDs (pointed out by Tomas Winkler). I wanted to use the values suggested in the last available 802.11 draft (2.0) but it assigns 50 to MESH_CONFIG, the same value than EXT_SUPP_RATES. Using the values proposed in the draft incremented by one. Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-06wireless: various definitions for mesh networkingLuis Carlos Cobo
Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-01iwlwifi: Fix MIMO PS modeTomas Winkler
This patch setups correctly MIMO PS mode flags Signed-off-by: Guy Cohen <guy.cohen@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28mac80211: fixing ieee80211_bar typesRon Rindjunsky
This patch changes ieee80211_bar control and start_seq_num to match the proper bitwise attribute expected from ieee 802.11 frame Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28mac80211: A-MPDU Rx adding basic functionalityRon Rindjunsky
This patch adds the basic needed abilities and functions for A-MPDU Rx session changed functions: - ieee80211_sta_process_addba_request - Rx A-MPDU initialization enabled - ieee80211_stop - stops all A-MPDU Rx in case interface goes down added functions: - ieee80211_send_delba - used for sending out Del BA in A-MPDU sessions - ieee80211_sta_stop_rx_BA_session - stopping Rx A-MPDU session - sta_rx_agg_session_timer_expired - stops A-MPDU Rx use if load is too low Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28mac80211: adding 802.11n definitions in ieee80211.hRon Rindjunsky
This patch adds several structs and definitions to ieee80211.h to support 802.11n draft specifications. As 802.11n depends on and extends the 802.11e standard in several issues, there are also several definitions that belong to 802.11e. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28ieee80211: Add IEEE80211_MAX_FRAME_LEN to linux/ieee80211.hMichael Wu
This patch adds IEEE80211_MAX_FRAME_LEN which is useful for drivers trying to determine how much to allocate for their RX buffers. It also updates the comment on IEEE80211_MAX_DATA_LEN based on revisions in 802.11e. IEEE80211_MAX_FRAG_THRESHOLD and IEEE80211_MAX_RTS_THRESHOLD are also revised due to the new maximum frame size. Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[PATCH] wireless networking: move frame inline functions to generic headerJohannes Berg
These inlines are generally useful, not just with mac80211. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-07-12[PATCH] mac80211: ERP IE handling improvementsDaniel Drake
The "protection needed" flag is currently parsed out of the ERP IE in beacons. This patch allows the ERP IE to be available at assocation time and causes the appropriate actions to be performed earlier. It is slightly complicated by the fact that most APs don't include the ERP IE in association responses. To work around this, we store ERP values in the ieee80211_sta_bss structure. Also added some WLAN_ERP defines for use by upcoming patches. Signed-off-by: Jiri Benc <jbenc@suse.cz> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-05-05[MAC80211]: Add generic include/linux/ieee80211.hJiri Benc
Add generic IEEE 802.11 definitions. Signed-off-by: Jiri Benc <jbenc@suse.cz> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>