summaryrefslogtreecommitdiffstats
path: root/include/linux/mlx4
AgeCommit message (Collapse)Author
2015-02-09IB/mlx4: Reset flow support for IB kernel ULPsYishai Hadas
The driver exposes interfaces that directly relate to HW state. Upon fatal error, consumers of these interfaces (ULPs) that rely on completion of all their posted work-request could hang, thereby introducing dependencies in shutdown order. To prevent this from happening, we manage the relevant resources (CQs, QPs) that are used by the device. Upon a fatal error, we now generate simulated completions for outstanding WQEs that were not completed at the time the HW was reset. It includes invoking the completion event handler for all involved CQs so that the ULPs will poll those CQs. When polled we return simulated CQEs with IB_WC_WR_FLUSH_ERR return code enabling ULPs to clean up their resources and not wait forever for completions upon receiving remove_one. The above change requires an extra check in the data path to make sure that when device is in error state, the simulated CQEs will be returned and no further WQEs will be posted. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/vxlan.c drivers/vhost/net.c include/linux/if_vlan.h net/core/dev.c The net/core/dev.c conflict was the overlap of one commit marking an existing function static whilst another was adding a new function. In the include/linux/if_vlan.h case, the type used for a local variable was changed in 'net', whereas the function got rewritten to fix a stacked vlan bug in 'net-next'. In drivers/vhost/net.c, Al Viro's iov_iter conversions in 'net-next' overlapped with an endainness fix for VHOST 1.0 in 'net'. In drivers/net/vxlan.c, vxlan_find_vni() added a 'flags' parameter in 'net-next' whereas in 'net' there was a bug fix to pass in the correct network namespace pointer in calls to this function. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-04net/mlx4_core: Port aggregation upper layer interfaceMoni Shoua
Supply interface functions to bond and unbond ports of a mlx4 internal interfaces. Example for such an interface is the one registered by the mlx4 IB driver under RoCE. There are 1. Functions to go in/out to/from bonded mode 2. Function to remap virtual ports to physical ports The bond_mutex prevents simultaneous access to data that keep status of the device in bonded mode. The upper mlx4 interface marks to the mlx4 core module that they want to be subject for such bonding by setting the MLX4_INTFF_BONDING flag. Interface which goes to/from bonded mode is re-created. The mlx4 Ethernet driver does not set this flag when registering the interface, the IB driver does. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-04net/mlx4_core: Port aggregation low level interfaceMoni Shoua
Implement the hardware interface required for port aggregation. 1. Disable RX port check on receive - don't perform a validity check that matches to QP's port and the port where the packet is received. 2. Virtual to physical port remap - configure virtual to physical port mapping. Port remap capability for virtual functions. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02net/mlx4_core: Fix kernel Oops (mem corruption) when working with more than ↵Jack Morgenstein
80 VFs Commit de966c592802 (net/mlx4_core: Support more than 64 VFs) was meant to allow up to 126 VFs. However, due to leaving MLX4_MFUNC_MAX too low, using more than 80 VFs resulted in memory corruptions (and Oopses) when more than 80 VFs were requested. In addition, the number of slaves was left too high. This commit fixes these issues. Fixes: de966c592802 ("net/mlx4_core: Support more than 64 VFs") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-27net/mlx4_core: Adjust command timeouts to conform to the firmware specJack Morgenstein
The firmware spec states that the timeout for all commands should be 60 seconds. In the past, the spec indicated that there were several classes of timeout (short, medium, and long). The driver has these different timeout classes. We leave the class differentiation in the driver as-is (to protect against any future spec changes), but set the timeout for all classes to be 60 seconds. In addition, we fix a few commands which had hard-coded numeric timeouts specified. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-27net/mlx4_core: Add bad-cable event supportJack Morgenstein
If the firmware can detect a bad cable, allow it to generate an event, and print the problem in the log. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-25net/mlx4_core: Enable device recovery flow with SRIOVYishai Hadas
In SRIOV, both the PF and the VF may attempt device recovery whenever they assume that the device is not functioning. When the PF driver resets the device, the VF should detect this and attempt to reinitialize itself. The VF must be able to reset itself under all circumstances, even if the PF is not responsive. The VF shall reset itself in the following cases: 1. Commands are not processed within reasonable time over the communication channel. This is done considering device state and the correct return code based on the command as was done in the native mode, done in the next patch. 2. The VF driver receives an internal error event reported by the PF on the communication channel. This occurs when the PF driver resets the device or when VF is out of sync with the PF. Add 'VF reset' capability, which allows the VF to reinitialize itself even when the PF is not responsive. As PF and VF may run their reset flow simulantanisly, there are several cases that are handled: - Prevent freeing VF resources upon FLR, when PF is in its unloading stage. - Prevent PF getting VF commands before it has finished initializing its resources. - Upon VF startup, check that comm-channel is online before sending commands to the PF and getting timed-out. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-25net/mlx4_core: Manage interface state for Reset flow casesYishai Hadas
We need to manage interface state to sync between reset flow and some other relative cases such as remove_one. This has to be done to prevent certain races. For example in case software stack is down as a result of unload call, the remove_one should skip the unload phase. Implement the remove_one case, handling AER and other cases comes next. The interface can be up/down, upon remove_one, the state will include an extra bit indicating that the device is cleaned-up, forcing other tasks to finish before the final cleanup. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-25net/mlx4_core: Activate reset flow upon fatal command casesYishai Hadas
We activate reset flow upon command fatal errors, when the device enters an erroneous state, and must be reset. The cases below are assumed to be fatal: FW command timed-out, an error from FW on closing commands, pci is offline when posting/pending a command. In those cases we place the device into an error state: chip is reset, pending commands are awakened and completed immediately. Subsequent commands will return immediately. The return code in the above cases will depend on the command. Commands which free and close resources will return success (because the chip was reset, so callers may safely free their kernel resources). Other commands will return -EIO. Since the device's state was marked as error, the catas poller will detect this and restart the device's software stack (as is done when a FW internal error is directly detected). The device state is protected by a persistent mutex lives on its mlx4_dev, as such no need any more for the hcr_mutex which is removed. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-25net/mlx4_core: Enhance the catas flow to support device resetYishai Hadas
This includes: - resetting the chip when a fatal error is detected (the current code does not do this). - exposing the ability to enter error state from outside the catas code by calling its functionality. (E.g. FW Command timeout, AER error). - managing a persistent device state. This is needed to sync between reset flow cases. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-25net/mlx4_core: Refactor the catas flow to work per deviceYishai Hadas
Using a WQ per device instead of a single global WQ, this allows independent reset handling per device even when SRIOV is used. This comes as a pre-patch for supporting chip reset for both native and SRIOV. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-25net/mlx4_core: Set device configuration data to be persistent across resetYishai Hadas
When an HCA enters an internal error state, this is detected by the driver. The driver then should reset the HCA and restart the software stack. Keep ports information and some SRIOV configuration in a persistent area to have it valid across reset. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-25net/mlx4_core: Maintain a persistent memory for mlx4 deviceYishai Hadas
Maintain a persistent memory that should survive reset flow/PCI error. This comes as a preparation for coming series to support above flows. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-30time: move the timecounter/cyclecounter code into its own file.Richard Cochran
The timecounter code has almost nothing to do with the clocksource code. Let it live in its own file. This will help isolate the timecounter users from the clocksource users in the source tree. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-11net/mlx4: Add support for A0 steeringMatan Barak
Add the required firmware commands for A0 steering and a way to enable that. The firmware support focuses on INIT_HCA, QUERY_HCA, QUERY_PORT, QUERY_DEV_CAP and QUERY_FUNC_CAP commands. Those commands are used to configure and query the device. The different A0 DMFS (steering) modes are: Static - optimized performance, but flow steering rules are limited. This mode should be choosed explicitly by the user in order to be used. Dynamic - this mode should be explicitly choosed by the user. In this mode, the FW works in optimized steering mode as long as it can and afterwards automatically drops to classic (full) DMFS. Disable - this mode should be explicitly choosed by the user. The user instructs the system not to use optimized steering, even if the FW supports Dynamic A0 DMFS (and thus will be able to use optimized steering in Default A0 DMFS mode). Default - this mode is implicitly choosed. In this mode, if the FW supports Dynamic A0 DMFS, it'll work in this mode. Otherwise, it'll work at Disable A0 DMFS mode. Under SRIOV configuration, when the A0 steering mode is enabled, older guest VF drivers who aren't using the RX QP allocation flag (MLX4_RESERVE_A0_QP) will get a QP from the general range and fail when attempting to register a steering rule. To avoid that, the PF context behaviour is changed once on A0 static mode, to require support for the allocation flag in VF drivers too. In order to enable A0 steering, we use log_num_mgm_entry_size param. If the value of the parameter is not positive, we treat the absolute value of log_num_mgm_entry_size as a bit field. Setting bit 2 of this bit field enables static A0 steering. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-11net/mlx4: Add A0 hybrid steeringMatan Barak
A0 hybrid steering is a form of high performance flow steering. By using this mode, mlx4 cards use a fast limited table based steering, in order to enable fast steering of unicast packets to a QP. In order to implement A0 hybrid steering we allocate resources from different zones: (1) General range (2) Special MAC-assigned QPs [RSS, Raw-Ethernet] each has its own region. When we create a rss QP or a raw ethernet (A0 steerable and BF ready) QP, we try hard to allocate the QP from range (2). Otherwise, we try hard not to allocate from this range. However, when the system is pushed to its limits and one needs every resource, the allocator uses every region it can. Meaning, when we run out of raw-eth qps, the allocator allocates from the general range (and the special-A0 area is no longer active). If we run out of RSS qps, the mechanism tries to allocate from the raw-eth QP zone. If that is also exhausted, the allocator will allocate from the general range (and the A0 region is no longer active). Note that if a raw-eth qp is allocated from the general range, it attempts to allocate the range such that bits 6 and 7 (blueflame bits) in the QP number are not set. When the feature is used in SRIOV, the VF has to notify the PF what kind of QP attributes it needs. In order to do that, along with the "Eth QP blueflame" bit, we reserve a new "A0 steerable QP". According to the combination of these bits, the PF tries to allocate a suitable QP. In order to maintain backward compatibility (with older PFs), the PF notifies which QP attributes it supports via QUERY_FUNC_CAP command. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-11net/mlx4: Change QP allocation schemeEugenia Emantayev
When using BF (Blue-Flame), the QPN overrides the VLAN, CV, and SV fields in the WQE. Thus, BF may only be used for QPNs with bits 6,7 unset. The current Ethernet driver code reserves a Tx QP range with 256b alignment. This is wrong because if there are more than 64 Tx QPs in use, QPNs >= base + 65 will have bits 6/7 set. This problem is not specific for the Ethernet driver, any entity that tries to reserve more than 64 BF-enabled QPs should fail. Also, using ranges is not necessary here and is wasteful. The new mechanism introduced here will support reservation for "Eth QPs eligible for BF" for all drivers: bare-metal, multi-PF, and VFs (when hypervisors support WC in VMs). The flow we use is: 1. In mlx4_en, allocate Tx QPs one by one instead of a range allocation, and request "BF enabled QPs" if BF is supported for the function 2. In the ALLOC_RES FW command, change param1 to: a. param1[23:0] - number of QPs b. param1[31-24] - flags controlling QPs reservation Bit 31 refers to Eth blueflame supported QPs. Those QPs must have bits 6 and 7 unset in order to be used in Ethernet. Bits 24-30 of the flags are currently reserved. When a function tries to allocate a QP, it states the required attributes for this QP. Those attributes are considered "best-effort". If an attribute, such as Ethernet BF enabled QP, is a must-have attribute, the function has to check that attribute is supported before trying to do the allocation. In a lower layer of the code, mlx4_qp_reserve_range masks out the bits which are unsupported. If SRIOV is used, the PF validates those attributes and masks out unsupported attributes as well. In order to notify VFs which attributes are supported, the VF uses QUERY_FUNC_CAP command. This command's mailbox is filled by the PF, which notifies which QP allocation attributes it supports. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-11net/mlx4_core: Use tasklet for user-space CQ completion eventsMatan Barak
Previously, we've fired all our completion callbacks straight from our ISR. Some of those callbacks were lightweight (for example, mlx4_en's and IPoIB napi callbacks), but some of them did more work (for example, the user-space RDMA stack uverbs' completion handler). Besides that, doing more than the minimal work in ISR is generally considered wrong, it could even lead to a hard lockup of the system. Since when a lot of completion events are generated by the hardware, the loop over those events could be so long, that we'll get into a hard lockup by the system watchdog. In order to avoid that, add a new way of invoking completion events callbacks. In the interrupt itself, we add the CQs which receive completion event to a per-EQ list and schedule a tasklet. In the tasklet context we loop over all the CQs in the list and invoke the user callback. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-16mlx4: use netdev_rss_key_fill() helperEric Dumazet
Use of well known RSS key increases attack surface. Switch to a random one, using generic helper so that all ports share a common key. Also provide ethtool -x support to fetch RSS key Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-13net/mlx4_core: Support more than 64 VFsMatan Barak
We now allow up to 126 VFs. Note though that certain firmware versions only allow up to 80 VFs. Moreover, old HCAs only support 64 VFs. In these cases, we limit the maximum number of VFs to 64. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-13net/mlx4_core: Flexible (asymmetric) allocation of EQs and MSI-X vectors for ↵Matan Barak
PF/VFs Previously, the driver queried the firmware in order to get the number of supported EQs. Under SRIOV, since this was done before the driver notified the firmware how many VFs it actually needs, the firmware had to take into account a worst case scenario and always allocated four EQs per VF, where one was used for events while the others were used for completions. Now, when the firmware supports the asymmetric allocation scheme, denoted by exposing num_sys_eqs > 0 (--> MLX4_DEV_CAP_FLAG2_SYS_EQS), we use the QUERY_FUNC command to query the firmware before enabling SRIOV. Thus we can get more EQs and MSI-X vectors per function. Moreover, when running in the new firmware/driver mode, the limitation that the number of EQs should be a power of two is lifted. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-11net/mlx4_en: Extend checksum offloading by CHECKSUM COMPLETEShani Michaeli
When processing received traffic, pass CHECKSUM_COMPLETE status to the stack, with calculated checksum for non TCP/UDP packets (such as GRE or ICMP). Although the stack expects checksum which doesn't include the pseudo header, the HW adds it. To address that, we are subtracting the pseudo header checksum from the checksum value provided by the HW. In the IPv6 case, we also compute/add the IP header checksum which is not added by the HW for such packets. Cc: Jerry Chu <hkchu@google.com> Signed-off-by: Shani Michaeli <shanim@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-03net/mlx4_core: Add retrieval of CONFIG_DEV parametersMatan Barak
Add code to issue CONFIG_DEV "get" firmware command. This command is used in order to obtain certain parameters used for supporting various RX checksumming options and vxlan UDP port. The GET operation is allowed for VFs too. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Shani Michaeli <shanim@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-28net/mlx4_core: Add ethernet backplane autoneg device capabilitySaeed Mahameed
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-28net/mlx4_core: Introduce ACCESS_REG CMD and eth_prot_ctrl dev capSaeed Mahameed
Adding ACCESS REG mlx4 command and use it to implement Query method for PTYS (Port Type and Speed Register). Query and store eth_prot_ctrl dev cap. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-28net/mlx4_core: Introduce mlx4_get_module_info for cable module info readingSaeed Mahameed
Added new MAD_IFC command to read cable module info with attribute id (0xFF60). Update include/linux/mlx4/device.h with function declaration (mlx4_get_module_info) and the needed defines/enums for future use. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06net/mlx4_en: Code cleanups in tx pathEric Dumazet
- Remove unused variable ring->poll_cnt - No need to set some fields if using blueflame - Add missing const's - Use unlikely - Remove unneeded new line - Make some comments more precise - struct mlx4_bf @offset field reduced to unsigned int to save space Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30net/mlx4_core: New init and exit flow for mlx4_coreMajd Dibbiny
In the new flow, we separate the pci initialization and teardown from the initialization and teardown of the other resources. __mlx4_init_one handles the pci resources initialization. It then calls mlx4_load_one to initialize the remainder of the resources. When removing a device, mlx4_remove_one is invoked. However, now mlx4_remove_one calls mlx4_unload_one to free all the resources except the pci resources. When mlx4_unload_one returns, mlx4_remove_one then frees the pci resources. The above separation will allow us to implement 'reset flow' in the future. It will also enable more EQs for VFs and is a pre-step to the modern API to enable/disable SRIOV. Also added nvfs; an integer array of size MLX4_MAX_PORTS + 1; to the mlx4_dev struct. This new field is used to avoid parsing the num_vfs module parameter each time the mlx4_restart_one is called. Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: arch/mips/net/bpf_jit.c drivers/net/can/flexcan.c Both the flexcan and MIPS bpf_jit conflicts were cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19net/mlx4_core: Enable CQE/EQE stride supportIdo Shamay
This feature is intended for archs having cache line larger then 64B. Since our CQE/EQEs are generally 64B in those systems, HW will write twice to the same cache line consecutively, causing pipe locks due to he hazard prevention mechanism. For elements in a cyclic buffer, writes are consecutive, so entries smaller than a cache line should be avoided, especially if they are written at a high rate. Reduce consecutive writes to same cache line in CQs/EQs, by allowing the driver to increase the distance between entries so that each will reside in a different cache line. Until the introduction of this feature, there were two types of CQE/EQE: 1. 32B stride and context in the [0-31] segment 2. 64B stride and context in the [32-63] segment This feature introduces two additional types: 3. 128B stride and context in the [0-31] segment (128B cache line) 4. 256B stride and context in the [0-31] segment (256B cache line) Modify the mlx4_core driver to query the device for the CQE/EQE cache line stride capability and to enable that capability when the host cache line size is larger than 64 bytes (supported cache lines are 128B and 256B). The mlx4 IB driver and libmlx4 need not be aware of this change. The PF context behaviour is changed to require this change in VF drivers running on such archs. Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-10net/mlx4: Set vlan stripping policy by the right commandMatan Barak
Changing the vlan stripping policy of the QP isn't supported by older firmware versions for the INIT2RTR command. Nevertheless, we've used it. Fix that by doing this policy change using INIT2RTR only if the firmware supports it, otherwise, we call UPDATE_QP command to do the task. Fixes: 7677fc9 ('net/mlx4: Strengthen VLAN tags/priorities enforcement in VST mode') Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2014-08-29net/mlx4: Move the tunnel steering helper function to mlx4_coreOr Gerlitz
Move the function which we use to set VXLAN DMFS (flow-steering) rules from mlx4_en to mlx4_core. This refactoring will allow the mlx4_ib driver to call the helper for the use case of user-space RAW Ethernet QPs, such that they can serve VXLAN traffic too. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-25net/mlx4: Use is_kdump_kernel() to detect kdump kernelAmir Vadai
Use is_kdump_kernel() to detect kdump kernel, instead of reset_devices. Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-14Merge tag 'rdma-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband/rdma updates from Roland Dreier: "Main set of InfiniBand/RDMA updates for 3.17 merge window: - MR reregistration support - MAD support for RMPP in userspace - iSER and SRP initiator updates - ocrdma hardware driver updates - other fixes..." * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (52 commits) IB/srp: Fix return value check in srp_init_module() RDMA/ocrdma: report asic-id in query device RDMA/ocrdma: Update sli data structure for endianness RDMA/ocrdma: Obtain SL from device structure RDMA/uapi: Include socket.h in rdma_user_cm.h IB/srpt: Handle GID change events IB/mlx5: Use ARRAY_SIZE instead of sizeof/sizeof[0] IB/mlx4: Use ARRAY_SIZE instead of sizeof/sizeof[0] RDMA/amso1100: Check for integer overflow in c2_alloc_cq_buf() IPoIB: Remove unnecessary test for NULL before debugfs_remove() IB/mad: Add user space RMPP support IB/mad: add new ioctl to ABI to support new registration options IB/mad: Add dev_notice messages for various umad/mad registration failures IB/mad: Update module to [pr|dev]_* style print messages IB/ipoib: Avoid multicast join attempts with invalid P_key IB/umad: Update module to [pr|dev]_* style print messages IB/ipoib: Avoid flushing the workqueue from worker context IB/ipoib: Use P_Key change event instead of P_Key polling mechanism IB/ipath: Add P_Key change event support mlx4_core: Add support for secure-host and SMP firewall ...
2014-08-14Merge branches 'core', 'cxgb4', 'ipoib', 'iser', 'iwcm', 'mad', 'misc', ↵Roland Dreier
'mlx4', 'mlx5', 'ocrdma' and 'srp' into for-next
2014-08-05mlx4_core: Add support for secure-host and SMP firewallJack Morgenstein
Secure-host is the general term for the capability of a device to protect itself and the subnet from malicious host software. This is achieved by: 1. Not allowing un-trusted entities to access device configuration registers, directly (through pci_cr or pci_conf) and indirectly (through MADs). 2. Hiding M_Key from untrusted entities. 3. Preventing the modification of GUID0 by un-trusted entities 4. Not allowing drivers on untrusted hosts to receive nor to transmit packets over QP0 (SMP Firewall). The secure-host capability depends on firmware handling all QP0 packets, and not passing these packets up to the driver. Any information required by the driver for proper operation (e.g., SM lid) is passed via events generated by the firmware while processing QP0 MADs. Driver support mainly requires using the MAD_DEMUX FW command at startup, where the feature is enabled/disabled through a procedure described in the Mellanox HCA tools package. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [ Fix error path in mlx4_setup_hca to go to err_mcg_table_free. - Roland ] Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-01mlx4_core: Add helper functions to support MR re-registrationMatan Barak
Add few helper functions to support a mechanism of getting an MPT, modifying it and updating the HCA with the modified object. The code takes 2 paths, one for directly changing the MPT (and sometimes its related MTTs) and another one which queries the MPT and updates the HCA via fw command SW2HW_MPT. The first path is used in native mode; the second path is slower and is used only in SRIOV. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-07-22net/mlx4_core: Use low memory profile on kdump kernelAmir Vadai
When running in kdump kernel, reduce number of resources allocated for the hardware. This will enable the NIC to operate in this low memory environment at the expense of performance and some features not related to the basic NIC functionality. Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-08net/mlx4_en: Fix set port ratelimit for 40GEEugenia Emantayev
In 40GE we can't use the default bw units for set ratelimit (100 Mbps) since the max is 255*100 Mbps = 25 Gbps (not suited for 40GE), thus we need 1 Gbps units. But for 10GE 1 Gbps units might be too bruit so we use the following solution. For user set ratelimit <= 25 Gbps: use 100 Mbps units * user_ratelimit (* 10). For user set ratelimit > 25 Gbps: use 1 Gbps units * user_ratelimit. For user set unlimited ratelimit (0 Gbps): use 1 Gbps units * MAX_RATELIMIT_DEFAULT (57) Note: any value > 58 will damage the FW ratelimit computation, so we allow a max and any higher value will be pulled down to 57. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-02net/mlx4_en: Don't use irq_affinity_notifier to track changes in IRQ ↵Amir Vadai
affinity map IRQ affinity notifier can only have a single notifier - cpu_rmap notifier. Can't use it to track changes in IRQ affinity map. Detect IRQ affinity changes by comparing CPU to current IRQ affinity map during NAPI poll thread. CC: Thomas Gleixner <tglx@linutronix.de> CC: Ben Hutchings <ben@decadent.org.uk> Fixes: 2eacc23 ("net/mlx4_core: Enforce irq affinity changes immediatly") Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) Seccomp BPF filters can now be JIT'd, from Alexei Starovoitov. 2) Multiqueue support in xen-netback and xen-netfront, from Andrew J Benniston. 3) Allow tweaking of aggregation settings in cdc_ncm driver, from Bjørn Mork. 4) BPF now has a "random" opcode, from Chema Gonzalez. 5) Add more BPF documentation and improve test framework, from Daniel Borkmann. 6) Support TCP fastopen over ipv6, from Daniel Lee. 7) Add software TSO helper functions and use them to support software TSO in mvneta and mv643xx_eth drivers. From Ezequiel Garcia. 8) Support software TSO in fec driver too, from Nimrod Andy. 9) Add Broadcom SYSTEMPORT driver, from Florian Fainelli. 10) Handle broadcasts more gracefully over macvlan when there are large numbers of interfaces configured, from Herbert Xu. 11) Allow more control over fwmark used for non-socket based responses, from Lorenzo Colitti. 12) Do TCP congestion window limiting based upon measurements, from Neal Cardwell. 13) Support busy polling in SCTP, from Neal Horman. 14) Allow RSS key to be configured via ethtool, from Venkata Duvvuru. 15) Bridge promisc mode handling improvements from Vlad Yasevich. 16) Don't use inetpeer entries to implement ID generation any more, it performs poorly, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1522 commits) rtnetlink: fix userspace API breakage for iproute2 < v3.9.0 tcp: fixing TLP's FIN recovery net: fec: Add software TSO support net: fec: Add Scatter/gather support net: fec: Increase buffer descriptor entry number net: fec: Factorize feature setting net: fec: Enable IP header hardware checksum net: fec: Factorize the .xmit transmit function bridge: fix compile error when compiling without IPv6 support bridge: fix smatch warning / potential null pointer dereference via-rhine: fix full-duplex with autoneg disable bnx2x: Enlarge the dorq threshold for VFs bnx2x: Check for UNDI in uncommon branch bnx2x: Fix 1G-baseT link bnx2x: Fix link for KR with swapped polarity lane sctp: Fix sk_ack_backlog wrap-around problem net/core: Add VF link state control policy net/fsl: xgmac_mdio is dependent on OF_MDIO net/fsl: Make xgmac_mdio read error message useful net_sched: drr: warn when qdisc is not work conserving ...
2014-06-10Merge tag 'rdma-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull main InfiniBand/RDMA updates from Roland Dreier: - add iWARP port mapper to avoid conflicts between RDMA and normal stack TCP connections. - fixes for i386 / x86-64 structure padding differences (ABI compatibility for 32-on-64) from Yann Droneaud. - a pile of SRP initiator fixes from Bart Van Assche. - fixes for a writeback / memory allocation deadlock with NFS over IPoIB connected mode from Jiri Kosina. - the usual fixes and cleanups to mlx4, mlx5, cxgb4 and other low-level drivers. * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (61 commits) RDMA/cxgb4: Add support for iWARP Port Mapper user space service RDMA/nes: Add support for iWARP Port Mapper user space service RDMA/core: Add support for iWARP Port Mapper user space service IB/mlx4: Fix gfp passing in create_qp_common() IB/umad: Fix use-after-free on close IB/core: Fix kobject leak on device register error flow RDMA/cxgb4: add missing padding at end of struct c4iw_alloc_ucontext_resp mlx4_core: Fix GFP flags parameters to be gfp_t IB/core: Fix port kobject deletion during error flow IB/core: Remove unneeded kobject_get/put calls IB/core: Fix sparse warnings about redeclared functions IB/mad: Fix sparse warning about gfp_t use IB/mlx4: Implement IB_QP_CREATE_USE_GFP_NOIO IB: Add a QP creation flag to use GFP_NOIO allocations IB: Return error for unsupported QP creation flags IB: Allow build of hw/ and ulp/ subdirectories independently mlx4_core: Move handling of MLX4_QP_ST_MLX to proper switch statement RDMA/cxgb4: Add missing padding at end of struct c4iw_create_cq_resp IB/srp: Avoid problems if a header uses pr_fmt IB/umad: Fix error handling ...
2014-06-10Merge branches 'core', 'cxgb3', 'cxgb4', 'iser', 'iwpm', 'misc', 'mlx4', ↵Roland Dreier
'mlx5', 'noio', 'ocrdma', 'qib', 'srp' and 'usnic' into for-next
2014-06-02IB/mlx4: Implement IB_QP_CREATE_USE_GFP_NOIOJiri Kosina
Modify the various routines used to allocate memory resources which serve QPs in mlx4 to get an input GFP directive. Have the Ethernet driver to use GFP_KERNEL in it's QP allocations as done prior to this commit, and the IB driver to use GFP_NOIO when the IB verbs IB_QP_CREATE_USE_GFP_NOIO QP creation flag is provided. Signed-off-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-06-02Revert "net/mlx4_en: Use affinity hint"David S. Miller
This reverts commit 70a640d0dae3a9b1b222ce673eb5d92c263ddd61. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-01net/mlx4_en: Use affinity hintYuval Atias
The “affinity hint” mechanism is used by the user space daemon, irqbalancer, to indicate a preferred CPU mask for irqs. Irqbalancer can use this hint to balance the irqs between the cpus indicated by the mask. We wish the HCA to preferentially map the IRQs it uses to numa cores close to it. To accomplish this, we use cpumask_set_cpu_local_first(), that sets the affinity hint according the following policy: First it maps IRQs to “close” numa cores. If these are exhausted, the remaining IRQs are mapped to “far” numa cores. Signed-off-by: Yuval Atias <yuvala@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-29IB/mlx4: Add interface for selecting VFs to enable QP0 via MLX proxy QPsJack Morgenstein
This commit adds the sysfs interface for enabling QP0 on VFs for selected VF/port. By default, no VFs are enabled for QP0 operation. To enable QP0 operation on a VF/port, under /sys/class/infiniband/mlx4_x/iov/<b:d:f>/ports/x there are two new entries: - smi_enabled (read-only). Indicates whether smi is currently enabled for the indicated VF/port - enable_smi_admin (rw). Used by the admin to request that smi capability be enabled or disabled for the indicated VF/port. 0 = disable, 1 = enable. The requested enablement will occur at the next reset of the VF (e.g. driver restart on the VM which owns the VF). Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>