summaryrefslogtreecommitdiffstats
path: root/include/linux/mmc
AgeCommit message (Collapse)Author
2013-10-30mmc: core: Add MMC_CAP_RUNTIME_RESUME to resume at runtime_resumeUlf Hansson
In some environments it is to prefer to postpone the resume of the card device until runtime_resume is being carried out, since it will mean a signficant decrease of the total system resume time. The reason of the decreased resume time is simply because of the actual re-initalization of the card, which typically takes hundreds of milliseconds, is performed outside the resume sequence and wont thus affect it. For removable card, the detect work tries to re-detect the card to make sure it is still present, as a part of that sequence the card will also be runtime_resumed and thus also fully resumed. For a non-removable card, typically a mmc blk request will trigger a runtime_resume and thus fully resume the card. This also means the first request will likely suffer from an inital latency since the re-initialization of the card needs to be performed. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-10-30mmc: Don't force card to active state when entering suspend/shutdownUlf Hansson
By adding a card state that records if it is suspended or resumed, we can accept asyncronus suspend/resume requests for the mmc and sd bus_ops. MMC_CAP_AGGRESSIVE_PM, will at request inactivity through the runtime bus_ops callbacks, execute a suspend of the the card. In the state were this has been done, we can receive a suspend request for the mmc bus, which for sd and mmc forced the card to active state by a pm_runtime_get_sync. In other words, the card was resumed and then immediately suspended again, completely unnecessary. Since the suspend/resume bus_ops callbacks for sd and mmc are now capable of handling asynchronous requests, we no longer need to force the card to active state before executing suspend. Evidently preventing the above sequence for MMC_CAP_AGGRESSIVE_PM. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-10-30mmc: core: Remove deprecated mmc_suspend|resume_host APIsUlf Hansson
The are no more users of the deprecated mmc_suspend|resume_host API, so let's remove it. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-10-30mmc: core: Move cached value of the negotiated ocr mask to card structUlf Hansson
The negotiated ocr mask is directly related to the card. Once a card gets removed, the mask shall be dropped. By moving the cache of the ocr mask from the host struct to the card struct we have accomplished this. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-10-30mmc: core: Do not poll for busy with status cmd for all switch cmdsUlf Hansson
Some switch operations like poweroff notify, shall according to the spec not be followed by any other new commands. For these cases and when the host does'nt support MMC_CAP_WAIT_WHILE_BUSY, we must not send status commands to poll for busy detection. Instead wait for the stated timeout from the EXT_CSD before completing the request. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Cc: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-09-25mmc: core: clean up duplicate macrosJackey Shen
Clean up the duplicate macros: mmc_sd_card_uhs -> mmc_card_uhs mmc_sd_card_set_uhs -> mmc_card_set_uhs Signed-off-by: Jackey Shen <jackey.shen@amd.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-09-25mmc: dw_mmc: guarantee stop-abort cmd in data errorsSeungwon Jeon
In error cases, DTO interrupt may or may not be generated depending on remained data. Stop/Abort command ensures DTO generation for that situation. Currently if 'stop' field of data is empty, there is no stop/abort command. So, it could hang waiting DTO. This change reinforces these cases. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Tested-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-09-25mmc: dw_mmc: control card read thresholdSeungwon Jeon
Card Read Threshold should be ensured that the card clock does not stop in the middle of a block of data being transferred from the card to the Host. Specially, clock stop is allowed in fast transfer such as HS200 or SDR104 mode. And so, it should be enabled. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Tested-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-09-25mmc: dw_mmc: adjust the fifoth with block sizeSeungwon Jeon
This change helps to choose msize, rx_watermark and tx_watermark depending on block size for IDMAC mode. For SDIO block size can be variable, so if these values are set incorrectly, card clock may stop. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Tested-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-09-25mmc: core: remove dead function mmc_try_claim_hostGrant Grundler
cscope says there are no callers for mmc_try_claim_host in the kernel. No reason to keep it. Signed-off-by: Grant Grundler <grundler@chromium.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-26mmc: sdhci: get voltage from sdhc hostHaijun Zhang
We use host->ocr_mask to hold the voltage get from device-tree node, In case host->ocr_mask was available, we use host->ocr_mask as the final available voltage can be used by MMC/SD/SDIO card. Signed-off-by: Haijun Zhang <haijun.zhang@freescale.com> Reviewed-by: Anton Vorontsov <anton@enomsg.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-26mmc: core: parse voltage from device-treeHaijun Zhang
Add function to support getting voltage from device-tree. If voltage-range is specified in device-tree node, this function will parse it and return the available voltage mask. Signed-off-by: Haijun Zhang <haijun.zhang@freescale.com> Acked-by: Anton Vorontsov <anton@enomsg.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-25mmc: sh_mmcif: revision-specific CLK_CTRL2 handlingGuennadi Liakhovetski
Some newer MMCIF IP revisions contain a CE_CLK_CTRL2 register, that has to be set for proper operation. Support for this feature is added in a way to preserve the current behaviour by default, i.e. when it is not enabled in platform data. Patch is based on work by Nobuyuki HIRAI. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-25mmc: sh_mmcif: revision-specific Command Completion Signal handlingGuennadi Liakhovetski
Some earlier MMCIF IP revisions contained Command Completion Signal support, which has been dropped again in modern versions. Sopport for this feature is added in a way to preserve the current behaviour by default, i.e. when it is not enabled in platform data. Patch is based on work by Nobuyuki HIRAI. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-25mmc: sh_mmcif: move header include from header into .cGuennadi Liakhovetski
sh_dma.h isn't needed in sh_mmcif.h, move it into sh_mmcif.c. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-24mmc: sh_mobile_sdhi: Remove .set_pwr() callback from platform dataLaurent Pinchart
The .set_pwr() callback isn't used anymore as all platforms register GPIO-controlled regulators. Remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-24mmc: sh_mobile_sdhi: Remove .get_cd() callback from platform dataLaurent Pinchart
All platforms pass the CD GPIO number to the driver in the .cd_gpio field. The .get_cd() callback isn't used anymore, remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-24mmc: sh_mmcif: Remove .set_pwr() callback from platform dataLaurent Pinchart
The .set_pwr() callback isn't used anymore as all platforms register GPIO-controlled regulators. Remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-24mmc: sh_mmcif: Remove .down_pwr() callback from platform dataLaurent Pinchart
The callback isn't used by the driver and isn't initialized by board code. Remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-24mmc: slot-gpio: Add debouncing capability to mmc_gpio_request_cd()Laurent Pinchart
Add a debounce parameter to the mmc_gpio_request_cd() function that enables GPIO debouncing when set to a non-zero value. This can be used by MMC host drivers to enable debouncing on the card detect signal. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-07-05mmc: esdhc: Fix bug when writing to SDHCI_HOST_CONTROL registerOded Gabbay
The P2020 has a non-standard implementation of the SDHCI_HOST_CONTROL register. This patch adds a QUIRK in the SDHCI header to signal that a host controller has a non-standard SDHCI_HOST_CONTROL register. The patch adds a check to the function esdhc_writeb in file sdhci-of-esdhc.c, where it checks if the write is done to the SDHCI_HOST_CONTROL register and th host has the above mentioned QUIRK, then the function simply returns instead of writing to the register. The patch also detects if the processor is P2020 (by looking in dev tree) and if so, adds the QUIRK to the host->quirk2 Signed-off-by: Oded Gabbay <ogabbay@advaoptical.com> Reviewed-by: Anton Vorontsov <anton@enomsg.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-06-27mmc: sdhci: fix caps2 for HS200Giuseppe CAVALLARO
Although the HC supports HS200 (eMMC) the caps2 are always zero; this means there's no way to use the super speed mode (when init the card). If the HC support SDR104, for SD3.0, so it also supports HS200 for eMMC and this patch just sets the MMC_CAP2_HS200 in the host caps2 field. Reported-by: Youssef Triki <youssef.triki@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Philip Rakity <prakity@nvidia.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-06-27mmc: core: Invent MMC_CAP2_FULL_PWR_CYCLEUlf Hansson
MMC_CAP2_FULL_PWR_CYCLE shall be set by host drivers which are able to do a complete power cycle of the card. In the eMMC case that includes both vcc and vccq. This CAP is providing the protocol layer with important information, needed to take optimized decisions during card initialization and in the suspend/resume sequence. MMC_CAP2_POWEROFF_NOTIFY is replaced by MMC_CAP2_FULL_PWR_CYCLE, since it makes sense to use a wider scope for it. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-06-27mmc: core: Handle card shutdown from mmc_busUlf Hansson
Considering shutdown of the card, the responsibility to initate this sequence shall be driven from the mmc_bus. This patch enables the mmc_bus to handle this sequence properly. A new .shutdown callback is added in the mmc_driver struct which is used to shutdown the blk device. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-06-27mmc: return mmc_of_parse() errors to callerSimon Baatz
In addition to just logging errors encountered during DT parsing or allocating GPIO slots for CD/WP, mmc_of_parse() now returns with an error. In particular, this is needed if the GPIO allocation may return EPROBE_DEFER. Signed-off-by: Simon Baatz <gmbnomis@gmail.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-05-26mmc: sdhci: add ability to stay runtime-resumed if the card is powered upAdrian Hunter
If card power is dependent on SD bus power then the host controller must not be runtime suspended while the card is powered up. Add the ability to stay runtime-resumed in that case and enable it with a new quirk SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-05-26mmc: core: Fix select power class after resumeFredrik Soderstedt
Use the saved values in card->ext_csd when selecting power class. By doing this the power class will be selected even if mmc_init_card is called with oldcard != NULL, which is the case after a suspend/resume. Today ext_csd is NULL if mmc_init_card is called with oldcard != NULL and power class will not be selected. According to the eMMC specification the POWER_CLASS value is reset after power failure, H/W reset assertion and any CMD0 reset. Signed-off-by: Fredrik Soderstedt <fredrik.soderstedt@stericsson.com> Reviewed-by: Johan Rudholm <jrudholm@gmail.com> Acked By: Girish K S <girish.shivananjappa@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-05-26mmc: core: Restructure and simplify code for mmc sleep|awakeUlf Hansson
The mmc_card_sleep|awake APIs are not being used since the support is already properly encapsulated within the suspend sequence. Sleep|awake command is also specific for eMMC. We remove the sleep|awake bus_ops, the mmc_card_sleep|awake APIs and move the code into the mmc specific core instead. This also includes the mmc ops function, mmc_sleepawake. All releated functions have then become static and we have got far less code to maintain. Additionally this patch also simplifies the code from mmc_sleepawake, since it is only used to put the card to sleep and not awake. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-05-26mmc: core: Support aggressive power management for (e)MMC/SDUlf Hansson
Aggressive power management is suitable when saving power is essential. At request inactivity timeout, aka pm runtime autosuspend timeout, the card will be suspended. Once a new request arrives, the card will be re-initalized and thus the first request will suffer from a latency. This latency is card-specific, experiments has shown in general that SD-cards has quite poor initialization time, around 300ms-1100ms. eMMC is not surprisingly far better but still a couple of hundreds of ms has been observed. Except for the request latency, it is important to know that suspending the card will also prevent the card from executing internal house-keeping operations in idle mode. This could mean degradation in performance. To use this feature make sure the request inactivity timeout is chosen carefully. This has not been done as a part of this patch. Enable this feature by using host cap MMC_CAP_AGGRESSIVE_PM and by setting CONFIG_MMC_UNSAFE_RESUME. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-05-26mmc: block: Enable runtime pm for mmc blkdeviceUlf Hansson
Once the mmc blkdevice is being probed, runtime pm will be enabled. By using runtime autosuspend, the power save operations can be done when request inactivity occurs for a certain time. Right now the selected timeout value is set to 3 s. Obviously this value will likely need to be configurable somehow since it needs to be trimmed depending on the power save algorithm. For SD-combo cards, we are still leaving the enablement of runtime PM to the SDIO init sequence since it depends on the capabilities of the SDIO func driver. Moreover, when the blk device is being suspended, we make sure the device will be runtime resumed. The reason for doing this is that we want the host suspend sequence to be unaware of any runtime power save operations done for the card in this phase. Thus it can just handle the suspend as the card is fully powered from a runtime perspective. Finally, this patch prepares to make it possible to move BKOPS handling into the runtime callbacks for the mmc bus_ops. Thus IDLE BKOPS can be accomplished. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-05-26mmc: card: Adding support for sanitize in eMMC 4.5Maya Erez
The sanitize support is added as a user-app ioctl call, and was removed from the block-device request, since its purpose is to be invoked not via File-System but by a user. This feature deletes the unmap memory region of the eMMC card, by writing to a specific register in the EXT_CSD. unmap region is the memory region that was previously deleted (by erase, trim or discard operation). In order to avoid timeout when sanitizing large-scale cards, the timeout for sanitize operation is 240 seconds. Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-05-26mmc: core: Re-use code for MMC_CAP2_DETECT_ON_ERR in polling modeUlf Hansson
Previously the MMC_CAP2_DETECT_ON_ERR was invented for detecting slow card removal. In was never a realy good solution and a proper fix has been merged using gpio debouncing instead. We remove this cap in this patch. Although when using polling card detect mode, the code invented for MMC_CAP2_DETECT_ON_ERR is re-used to complete card removal in an earlier phase. There are no need waiting for the polling timeout to elapse in this case. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Kevin Liu <kliu5@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-05-06Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds Pull LED subsystem updates from Bryan Wu: - move LED trigger drivers into a new directory - lp55xx common driver updates - other led drivers updates and bug fixing * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: leds: leds-asic3: switch to using SIMPLE_DEV_PM_OPS leds: leds-bd2802: add CONFIG_PM_SLEEP to suspend/resume functions leds: lp55xx: configure the clock detection leds: lp55xx: use common clock framework when external clock is used leds: leds-ns2: fix oops at module removal leds: leds-pwm: Defer led_pwm_set() if PWM can sleep leds: lp55xx: fix the sysfs read operation leds: lm355x, lm3642: support camera LED triggers for flash and torch leds: add camera LED triggers leds: trigger: use inline functions instead of macros leds: tca6507: Use of_match_ptr() macro leds: wm8350: Complain if we fail to reenable DCDC leds: renesas: set gpio_request_one() flags param correctly leds: leds-ns2: set devm_gpio_request_one() flags param correctly leds: leds-lt3593: set devm_gpio_request_one() flags param correctly leds: leds-bd2802: remove erroneous __exit annotation leds: atmel-pwm: remove erroneous __exit annotation leds: move LED trigger drivers into new subdirectory leds: add new LP5562 LED driver
2013-04-12mmc: core: fix performance regression initializing MMC host controllersAdrian Hunter
Commit fa5501890d8974301042e0202d342a6cbe8609f4 introduced a performance regression by adding mmc_power_up() to mmc_start_host(). mmc_power_up() is not necessary to host controller initialization, it is part of card initialization and is performed anyway asynchronously. This patch allows a driver to leave the power up in asynchronous code (as it was before). On my current target platform this reduces driver initialization from: [ 1.313220] initcall sdhci_acpi_driver_init+0x0/0x12 returned 0 after 102008 usecs to this: [ 1.217209] initcall sdhci_acpi_driver_init+0x0/0x12 returned 0 after 8331 usecs Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-01leds: trigger: use inline functions instead of macrosKim, Milo
Macros are used in case that an inline function doesn't work. Otherwise, use an empty inline function. (a) Case of !CONFIG_LEDS_TRIGGERS Following macros are replaced with inline functions. led_trigger_register_simple() led_trigger_unregister_simple() led_trigger_event() To make inline types, the structure, 'led_trigger' should be defined. This structure has no member at all. (b) Case of !CONFIG_LEDS_TRIGGER_IDE_DISK ledtrig_ide_activity() macro is replaced with an inline function as well. (c) DEFINE_LED_TRIGGER() and DEFINE_LED_TRIGGER_GLOBAL() Struct 'led_trigger' is defined both cases, with CONFIG_LEDS_TRIGGERS and without CONFIG_LEDS_TRIGGERS. Those macros are moved out of CONFIG_LED_TRIGGERS because of no-dependency on CONFIG_LEDS_TRIGGERS. (d) Fix build errors in mmc-core driver After replacing macros with inline functions, following build errors occur. (condition: CONFIG_LEDS_TRIGGERS is not set) drivers/mmc/core/core.c: In function 'mmc_request_done': drivers/mmc/core/core.c:164:25: error: 'struct mmc_host' has no member named 'led' drivers/mmc/core/core.c: In function 'mmc_start_request': drivers/mmc/core/core.c:254:24: error: 'struct mmc_host' has no member named 'led' make[3]: *** [drivers/mmc/core/core.o] Error 1 The reason of these errors is non-existent member variable, 'led'. It is only valid when CONFIG_LEDS_TRIGGERS is set. But now, it can be used without this dependency. To fix build errors, member 'led' is always used without its config option in 'include/linux/mmc/host.h'. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-03-22mmc: sdio: bind acpi with sdio function deviceAaron Lu
ACPI spec 5 defined the _ADR encoding for sdio bus as: High word - slot number (0 based) Low word - function number This patch adds support for binding sdio function device with acpi node, and if successful, involve acpi into its power management. Signed-off-by: Aaron Lu <aaron.lu@intel.com> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-03-22mmc: core: Add in support to expose PRV for v4 MMCsBernie Thompson
The JEDEC MMC v4 spec defines a new PRV value in place of the original fwrev and hwrev specified in v1. We can expose this in the kernel to enable user space to more easily determine the product revision of a given MMC. Signed-off-by: Bernie Thompson <bhthompson@chromium.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24mmc: sh_mobile_sdhi: remove unused .pdata fieldGuennadi Liakhovetski
The struct sh_mobile_sdhi_info::pdata field was only used for platform- based card detection and isn't used anymore since the migration to GPIO- based MMC slot functions. Remove it. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24mmc: (cosmetic) remove "extern" from function declarationsGuennadi Liakhovetski
The "extern" keyword isn't required in function declarations, remove it. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24mmc: provide a standard MMC device-tree binding parser centrallyGuennadi Liakhovetski
MMC defines a number of standard DT bindings. Having each driver parse them individually adds code redundancy and is error prone. Provide a standard function to unify the parsing. After all drivers are converted to using it instead of their own parsers, this function can be integrated into mmc_alloc_host(). Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24mmc: support packed write command for eMMC4.5 devicesSeungwon Jeon
This patch supports packed write command of eMMC4.5 devices. Several writes can be grouped in packed command and all data of the individual commands can be sent in a single transfer on the bus. Large amounts of data in one transfer rather than several data of small size are effective for eMMC write internally. As a result, packed command help write throughput be improved. The following tables show the results of packed write. Type A: test none | packed iozone 25.8 | 31 tiotest 27.6 | 31.2 lmdd 31.2 | 35.4 Type B: test none | packed iozone 44.1 | 51.1 tiotest 47.9 | 52.5 lmdd 51.6 | 59.2 Type C: test none | packed iozone 19.5 | 32 tiotest 19.9 | 34.5 lmdd 22.8 | 40.7 Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Reviewed-by: Maya Erez <merez@codeaurora.org> Reviewed-by: Namjae Jeon <linkinjeon@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24mmc: add packed command feature of eMMC4.5Seungwon Jeon
This patch adds packed command feature of eMMC4.5. The maximum number for packing read (or write) is offered and exception event relevant to packed command which is used for error handling is enabled. If host wants to use this feature, MMC_CAP2_PACKED_CMD should be set. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Reviewed-by: Maya Erez <merez@codeaurora.org> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Reviewed-by: Namjae Jeon <linkinjeon@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24mmc: sdhci: enhance preset value functionKevin Liu
4d55c5a1 ("mmc: sdhci: enable preset value after uhs initialization") added preset value support and enabled it by default during sd card init. Below are the enhancements introduced by this patch: 1. In current code, preset value is enabled after setting clock finished, which means the clock is manually set by driver firstly and then suddenly switched to preset value at this point. So the first setting is useless and unnecessary. What's more, the first clock setting may differ from the preset one. The better way is enable preset value just after switch to UHS mode so the preset value can take effect immediately. So move preset value enable from mmc_sd_init_card to sdhci_set_ios which will be called during set timing. 2. In current code, preset value is disabled at the beginning of mmc_attach_sd. It's too late since low freq (400khz) should be set in mmc_power_up. So move preset value disable to sdhci_set_ios which will be called during power up. 3. host->clock and ios->drv_type should also be updated according to the preset value if it's enabled. Current code missed this. 4. This patch also introduce a quirk to disable preset value in case preset value doesn't work. This patch has been verified on sdhci-pxav3 platform with both preset enabled and disabled. Signed-off-by: Kevin Liu <kliu5@marvell.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24mmc: core: Add card_busy to host_opsJohan Rudholm
This host_ops member is used to test if the card is signaling busy by pulling dat[0:3] low. Signed-off-by: Johan Rudholm <johan.rudholm@stericsson.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Wei WANG <wei_wang@realsil.com.cn> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24mmc: dw_mmc: Remove DW_MCI_QUIRK_NO_WRITE_PROTECTDoug Anderson
The original quirk was added in the change 'mmc: dw_mmc: add quirk to indicate missing write protect line'. The original quirk was added at a controller level even though each slot has its own write protect (so the quirk should be at the slot level). A recent change (mmc: dw_mmc: Add "disable-wp" device tree property) added a slot-level quirk and support for the quirk directly to dw_mmc. Signed-off-by: Doug Anderson <dianders@chromium.org> Acked-by: Will Newton <will.newton@imgtec.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24mmc: dw_mmc: Add "disable-wp" device tree propertyDoug Anderson
The "disable-wp" property is used to specify that a given SD card slot doesn't have a concept of write protect. This eliminates the need for special case code for SD slots that should never be write protected (like a micro SD slot or a dev board). The dw_mmc driver is special in needing to specify "disable-wp" because the lack of a "wp-gpios" property means to use the special purpose write protect line. On some other mmc devices the lack of "wp-gpios" means that write protect should be disabled. Signed-off-by: Doug Anderson <dianders@chromium.org> Acked-by: Seungwon Jeon <tgih.jun@samsung.com> Acked-by: Will Newton <will.newton@imgtec.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24mmc: correct the EXCEPTION_EVENTS_STATUS value in commentZhang, YiX X
The right value is 54 according to eMMC 4.5 specification. Signed-off-by: ZhangYi <yix.x.zhang@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-11mmc: fix async request mechanism for sequential read scenariosKonstantin Dorfman
When current request is running on the bus and if next request fetched by mmcqd is NULL, mmc context (mmcqd thread) gets blocked until the current request completes. This means that if new request comes in while the mmcqd thread is blocked, this new request can not be prepared in parallel to current ongoing request. This may result in delaying the new request execution and increase it's latency. This change allows to wake up the MMC thread on new request arrival. Now once the MMC thread is woken up, a new request can be fetched and prepared in parallel to the current running request which means this new request can be started immediately after the current running request completes. With this change read throughput is improved by 16%. Signed-off-by: Konstantin Dorfman <kdorfman@codeaurora.org> Reviewed-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-11mmc: sdio: Fix SDIO 3.0 UHS-I initialization sequenceSujit Reddy Thumma
According to UHS-I initialization sequence for SDIO 3.0 cards, the host must set bit[24] (S18R) of OCR register during OCR handshake to know whether the SDIO card is capable of doing 1.8V I/O. Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org> Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Reviewed-by: Johan Rudholm <johan.rudholm@stericsson.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-12-11Merge tag 'mmc-updates-for-3.8-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC updates from Chris Ball: "MMC highlights for 3.8: Core: - Expose access to the eMMC RPMB ("Replay Protected Memory Block") area by extending the existing mmc_block ioctl. - Add SDIO powered-suspend DT properties to the core MMC DT binding. - Add no-1-8-v DT flag for boards where the SD controller reports that it supports 1.8V but the board itself has no way to switch to 1.8V. - More work on switching to 1.8V UHS support using a vqmmc regulator. - Fix up a case where the slot-gpio helper may fail to reset the host controller properly if a card was removed during a transfer. - Fix several cases where a broken device could cause an infinite loop while we wait for a register to update. Drivers: - at91-mci: Remove obsolete driver, atmel-mci handles these devices now. - sdhci-dove: Allow using GPIOs for card-detect notifications. - sdhci-esdhc: Fix for recovering from ADMA errors on broken silicon. - sdhci-s3c: Add pinctrl support. - wmt-sdmmc: New driver for WonderMedia SD/MMC controllers." * tag 'mmc-updates-for-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (65 commits) mmc: sdhci: implement the .card_event() method mmc: extend the slot-gpio card-detection to use host's .card_event() method mmc: add a card-event host operation mmc: sdhci-s3c: Fix compilation warning mmc: sdhci-pci: Enable SDHCI_CAN_DO_HISPD for Ricoh SDHCI controller mmc: sdhci-dove: allow GPIOs to be used for card detection on Dove mmc: sdhci-dove: use two-stage initialization for sdhci-pltfm mmc: sdhci-dove: use devm_clk_get() mmc: eSDHC: Recover from ADMA errors mmc: dw_mmc: remove duplicated buswidth code mmc: dw_mmc: relocate where dw_mci_setup_bus() is called from mmc: Limit MMC speed to 52MHz if not HS200 mmc: dw_mmc: use devres functions in dw_mmc mmc: sh_mmcif: remove unneeded clock connection ID mmc: sh_mobile_sdhi: remove unneeded clock connection ID mmc: sh_mobile_sdhi: fix clock frequency printing mmc: Remove redundant null check before kfree in bus.c mmc: Remove redundant null check before kfree in sdio_bus.c mmc: sdhci-imx-esdhc: use more devm_* functions mmc: dt: add no-1-8-v device tree flag ...