summaryrefslogtreecommitdiffstats
path: root/include/linux/pci_regs.h
AgeCommit message (Collapse)Author
2012-10-13UAPI: (Scripted) Disintegrate include/linuxDavid Howells
Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Michael Kerrisk <mtk.manpages@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Dave Jones <davej@redhat.com>
2012-08-23Merge branch 'pci/bjorn-find-next-ext-cap' into nextBjorn Helgaas
* pci/bjorn-find-next-ext-cap: PCI: Add Vendor-Specific Extended Capability header info PCI: Add pci_find_next_ext_capability() Conflicts: drivers/pci/pci.c
2012-08-23PCI: Add accessors for PCI Express CapabilityJiang Liu
The PCI Express Capability (PCIe spec r3.0, sec 7.8) comes in two versions, v1 and v2. In v1 Capability structures (PCIe spec r1.0 and r1.1), some fields are optional, so the structure size depends on the device type. This patch adds functions to access this capability so drivers don't have to be aware of the differences between v1 and v2. Note that these new functions apply only to the "PCI Express Capability," not to any of the other "PCI Express Extended Capabilities" (AER, VC, ACS, MFVC, etc.) Function pcie_capability_read_word/dword() reads the PCIe Capabilities register and returns the value in the reference parameter "val". If the PCIe Capabilities register is not implemented on the PCIe device, "val" is set to 0. Function pcie_capability_write_word/dword() writes the value to the specified PCIe Capability register. Function pcie_capability_clear_and_set_word/dword() sets and/or clears bits of a PCIe Capability register. [bhelgaas: changelog, drop "pci_" prefixes, don't export pcie_capability_reg_implemented()] Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-08-22PCI: Add Vendor-Specific Extended Capability header infoBjorn Helgaas
This adds the fields in the Vendor-Specific Header: ID, Rev, and Length. There may be multiple Vendor-Specific capabilities, so drivers should use the VSEC ID to identify the one of interest. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-07-26Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm updates from Dave Airlie: "One of the smaller drm -next pulls in ages! Ben (nouveau) has a rewrite in progress but we decided to leave it stew for another cycle, so just some fixes from him. - radeon: lots of documentation work, fixes, more ring and locking changes, pcie gen2, more dp fixes. - i915: haswell features, gpu reset fixes, /dev/agpgart removal on machines that we never used it on, more VGA/HDP fix., more DP fixes - drm core: cleanups from Daniel, sis 64-bit fixes, range allocator colouring. but yeah fairly quiet merge this time, probably because I missed half of it!" Trivial add-add conflict in include/linux/pci_regs.h * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (255 commits) drm/nouveau: init vblank requests list drm/nv50: extend vblank semaphore to generic dmaobj + offset pair drm/nouveau: mark most of our ioctls as deprecated, move to compat layer drm/nouveau: move current gpuobj code out of nouveau_object.c drm/nouveau/gem: fix object reference leak in a failure path drm/nv50: rename INVALID_QUERY_OR_TEXTURE error to INVALID_OPERATION drm/nv84: decode PCRYPT errors drm/nouveau: dcb table quirk for fdo#50830 nouveau: Fix alignment requirements on src and dst addresses drm/i915: unbreak lastclose for failed driver init drm/i915: Set the context before setting up regs for the context. drm/i915: constify mode in crtc_mode_fixup drm/i915/lvds: ditch ->prepare special case drm/i915: dereferencing an error pointer drm/i915: fix invalid reference handling of the default ctx obj drm/i915: Add -EIO to the list of known errors for __wait_seqno drm/i915: Flush the context object from the CPU caches upon switching drm/radeon: fix dpms on/off on trinity/aruba v2 drm/radeon: on hotplug force link training to happen (v2) drm/radeon: fix hotplug of DP to DVI|HDMI passive adapters (v2) ...
2012-07-19pci_regs: define LNKSTA2 pcie cap + bits.Dave Airlie
We need these for detecting the max link speed for drm drivers. Acked-by: Bjorn Helgaas <bhelgass@google.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-07-10Merge branch 'pci/bjorn-p2p-bridge-windows' into nextBjorn Helgaas
* pci/bjorn-p2p-bridge-windows: sparc/PCI: replace pci_cfg_fake_ranges() with pci_read_bridge_bases() PCI: support sizing P2P bridge I/O windows with 1K granularity PCI: reimplement P2P bridge 1K I/O windows (Intel P64H2) PCI: allow P2P bridge windows starting at PCI bus address zero Conflicts: drivers/pci/probe.c include/linux/pci.h
2012-07-09PCI: reimplement P2P bridge 1K I/O windows (Intel P64H2)Bjorn Helgaas
9d265124d051 and 15a260d53f7c added quirks for P2P bridges that support I/O windows that start/end at 1K boundaries, not just the 4K boundaries defined by the PCI spec. For details, see the IOBL_ADR register and the EN1K bit in the CNF register in the Intel 82870P2 (P64H2). These quirks complicate the code that reads P2P bridge windows (pci_read_bridge_io() and pci_cfg_fake_ranges()) because the bridge I/O resource is updated in the HEADER quirk, in pci_read_bridge_io(), in pci_setup_bridge(), and again in the FINAL quirk. This is confusing and makes it impossible to reassign the bridge windows after FINAL quirks are run. This patch adds support for 1K windows in the generic paths, so the HEADER quirk only has to enable this support. The FINAL quirk, which used to undo damage done by pci_setup_bridge(), is no longer needed. This removes "if (!res->start) res->start = ..." from pci_read_bridge_io(); that was part of 9d265124d051 to avoid overwriting the resource filled in by the quirk. Since pci_read_bridge_io() itself now knows about granularity, the quirk no longer updates the resource and this test is no longer needed. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-06-18Merge branch 'topic/stowe-cap-cleanup' into nextBjorn Helgaas
* topic/stowe-cap-cleanup: PCI: remove redundant capabilities checking in pci_{save, restore}_pcie_state PCI: add pci_pcie_cap2() check for PCIe feature capabilities >= v2 PCI: remove redundant checking in PCI Express capability routines PCI: make pci_ltr_supported() static
2012-06-12PCI: misc pci_reg additionsAlex Williamson
Fill in many missing definitions and add sizeof fields for many sections allowing for more extensive config parsing. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-06-11PCI: add pci_pcie_cap2() check for PCIe feature capabilities >= v2Myron Stowe
This patch resolves potential issues when accessing PCI Express Capability structures. The makeup of the capability varies substantially between v1 and v2: Version 1 of the PCI Express Capability (defined by PCI Express 1.0 and 1.1 base) neither requires the endpoint to implement the entire PCIe capability structure nor specifies default values of registers that are not implemented by the device. Version 2 of the PCI Express Capability (defined by PCIe 1.1 Capability Structure Expansion ECN, PCIe 2.0, 2.1, and 3.0) added additional registers to the structure and requires all registers to be either implemented or hardwired to 0. Due to the differences in the capability structures, code dealing with capability features must be careful not to access the additional registers introduced with v2 unless the device is specifically known to be a v2 capable device. Otherwise, attempts to access non-existant registers will occur. This is a subtle issue that is hard to track down when it occurs (and it has - see commit 864d296cf94). To try and help mitigate such occurrences, this patch introduces pci_pcie_cap2() which is similar to pci_pcie_cap() but also checks that the PCIe capability version is >= 2. pci_pcie_cap2() should be used for qualifying PCIe capability features introduced after v1. Suggested by Don Dutile. Acked-by: Donald Dutile <ddutile@redhat.com> Signed-off-by: Myron Stowe <myron.stowe@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-02-23PCI: Add PCI_EXP_TYPE_PCIE_BRIDGE valueAnthony PERARD
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-11Merge branch 'linux-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci: (80 commits) x86/PCI: Expand the x86_msi_ops to have a restore MSIs. PCI: Increase resource array mask bit size in pcim_iomap_regions() PCI: DEVICE_COUNT_RESOURCE should be equal to PCI_NUM_RESOURCES PCI: pci_ids: add device ids for STA2X11 device (aka ConneXT) PNP: work around Dell 1536/1546 BIOS MMCONFIG bug that breaks USB x86/PCI: amd: factor out MMCONFIG discovery PCI: Enable ATS at the device state restore PCI: msi: fix imbalanced refcount of msi irq sysfs objects PCI: kconfig: English typo in pci/pcie/Kconfig PCI/PM/Runtime: make PCI traces quieter PCI: remove pci_create_bus() xtensa/PCI: convert to pci_scan_root_bus() for correct root bus resources x86/PCI: convert to pci_create_root_bus() and pci_scan_root_bus() x86/PCI: use pci_scan_bus() instead of pci_scan_bus_parented() x86/PCI: read Broadcom CNB20LE host bridge info before PCI scan sparc32, leon/PCI: convert to pci_scan_root_bus() for correct root bus resources sparc/PCI: convert to pci_create_root_bus() sh/PCI: convert to pci_scan_root_bus() for correct root bus resources powerpc/PCI: convert to pci_create_root_bus() powerpc/PCI: split PHB part out of pcibios_map_io_space() ... Fix up conflicts in drivers/pci/msi.c and include/linux/pci_regs.h due to the same patches being applied in other branches.
2012-01-06PCI: Fix PCI_EXP_TYPE_RC_EC valueAlex Williamson
Spec shows this as 1010b = 0xa Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-06PCI: Fix PRI and PASID consistencyAlex Williamson
These are extended capabilities, rename and move to proper group for consistency. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-12-05PCI: More PRI/PASID cleanupAlex Williamson
More consistency cleanups. Drop the _OFF, separate and indent CTRL/CAP/STATUS bit definitions. This helped find the previous mis-use of bit 0 in the PASID capability register. Reviewed-by: Joerg Roedel <joerg.roedel@amd.com> Tested-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-12-05PCI: Fix PRI and PASID consistencyAlex Williamson
These are extended capabilities, rename and move to proper group for consistency. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-10-14PCI: Add support for PASID capabilityJoerg Roedel
Devices supporting Process Address Space Identifiers (PASIDs) can use an IOMMU to access multiple IO address spaces at the same time. A PCIe device indicates support for this feature by implementing the PASID capability. This patch adds support for the capability to the Linux kernel. Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-10-14PCI: Add implementation for PRI capabilityJoerg Roedel
Implement the necessary functions to handle PRI capabilities on PCIe devices. With PRI devices behind an IOMMU can signal page fault conditions to software and recover from such faults. Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-05-11PCI: add latency tolerance reporting enable/disable supportJesse Barnes
Latency tolerance reporting allows devices to send messages to the root complex indicating their latency tolerance for snooped & unsnooped memory transactions. Add support for enabling & disabling this feature, along with a routine to set the max latencies a device should send upstream. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-05-11PCI: add OBFF enable/disable supportJesse Barnes
OBFF (optimized buffer flush/fill), where supported, can help improve energy efficiency by giving devices information about when interrupts and other activity will have a reduced power impact. It requires support from both the device and system (i.e. not only does the device need to respond to OBFF messages, but the platform must be capable of generating and routing them to the end point). Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-05-11PCI: add ID-based ordering enable/disable supportJesse Barnes
Add support to allow drivers to enable/disable ID-based ordering. Where supported, ID-based ordering can significantly improve the latency of individual requests by preventing them from queueing up behind unrelated traffic. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2010-12-23PCI/PCIe: Clear Root PME Status bits early during system resumeRafael J. Wysocki
I noticed that PCI Express PMEs don't work on my Toshiba Portege R500 after the system has been woken up from a sleep state by a PME (through Wake-on-LAN). After some investigation it turned out that the BIOS didn't clear the Root PME Status bit in the root port that received the wakeup PME and since the Requester ID was also set in the port's Root Status register, any subsequent PMEs didn't trigger interrupts. This problem can be avoided by clearing the Root PME Status bits in all PCI Express root ports during early resume. For this purpose, add an early resume routine to the PCIe port driver and make this driver be always registered, even if pci_ports_disable is set (in which case the driver's only function is to provide the early resume callback). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-12-23PCI: Add mask bit definition for MSI-X tableSheng Yang
Then we can use it instead of magic number 1. Reviewed-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-12-23PCI: MSI: Move MSI-X entry definition to pci_regs.hSheng Yang
Then it can be used by others. Reviewed-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-10-17PCI: add PCI_MSIX_TABLE/PBA definesHidetoshi Seto
These are already defined in pcilib's pci/header.h but not in kernel's linux/pci_regs.h. Copy them to avoid using magic numbers. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-21Merge branch 'linux-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (36 commits) PCI: hotplug: pciehp: Removed check for hotplug of display devices PCI: read memory ranges out of Broadcom CNB20LE host bridge PCI: Allow manual resource allocation for PCI hotplug bridges x86/PCI: make ACPI MCFG reserved error messages ACPI specific PCI hotplug: Use kmemdup PM/PCI: Update PCI power management documentation PCI: output FW warning in pci_read/write_vpd PCI: fix typos pci_device_dis/enable to pci_dis/enable_device in comments PCI quirks: disable msi on AMD rs4xx internal gfx bridges PCI: Disable MSI for MCP55 on P5N32-E SLI x86/PCI: irq and pci_ids patch for additional Intel Cougar Point DeviceIDs PCI: aerdrv: trivial cleanup for aerdrv_core.c PCI: aerdrv: trivial cleanup for aerdrv.c PCI: aerdrv: introduce default_downstream_reset_link PCI: aerdrv: rework find_aer_service PCI: aerdrv: remove is_downstream PCI: aerdrv: remove magical ROOT_ERR_STATUS_MASKS PCI: aerdrv: redefine PCI_ERR_ROOT_*_SRC PCI: aerdrv: rework do_recovery PCI: aerdrv: rework get_e_source() ...
2010-05-11PCI: aerdrv: redefine PCI_ERR_ROOT_*_SRCHidetoshi Seto
The Error Source Identification Register (Offset 34h) is 4 byte which contains a couple of 2 byte field, "[15:0] ERR_COR Source Identification" and "[31:16] ERR_FATAL/NONFATAL Source Identification." This patch defines PCI_ERR_ROOT_ERR_SRC to make dword access sensible. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-04-27igb: add support for reporting 5GT/s during probe on PCIe Gen2Alexander Duyck
This change corrects the fact that we were not reporting Gen2 link speeds when we were in fact connected at Gen2 rates. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-23x86/PCI: Moorestown PCI supportJesse Barnes
The Moorestown platform only has a few devices that actually support PCI config cycles. The rest of the devices use an in-RAM MCFG space for the purposes of device enumeration and initialization. There are a few uglies in the fake support, like BAR sizes that aren't a power of two, sizing detection, and writes to the real devices, but other than that it's pretty straightforward. Another way to think of this is not really as PCI at all, but just a table in RAM describing which devices are present, their capabilities and their offsets in MMIO space. This could have been done with a special new firmware table on this platform, but given that we do have some real PCI devices too, simply describing things in an MCFG type space was pretty simple. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> LKML-Reference: <43F901BD926A4E43B106BF17856F07559FB80D08@orsmsx508.amr.corp.intel.com> Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-11-04PCI: populate subsystem vendor and device IDs for PCI bridgesGabe Black
Change to populate the subsystem vendor and subsytem device IDs for PCI-PCI bridges that implement the PCI Subsystem Vendor ID capability. Previously bridges left subsystem vendor IDs unpopulated. Signed-off-by: Gabe Black <gabe.black@ni.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-11-04PCI: acs p2p upsteram forwarding enablingAllen Kay
Note: dom0 checking in v4 has been separated out into 2/2. This patch enables P2P upstream forwarding in ACS capable PCIe switches. It solves two potential problems in virtualization environment where a PCIe device is assigned to a guest domain using a HW iommu such as VT-d: 1) Unintentional failure caused by guest physical address programmed into the device's DMA that happens to match the memory address range of other downstream ports in the same PCIe switch. This causes the PCI transaction to go to the matching downstream port instead of go to the root complex to get translated by VT-d as it should be. 2) Malicious guest software intentionally attacks another downstream PCIe device by programming the DMA address into the assigned device that matches memory address range of the downstream PCIe port. We are in process of implementing device filtering software in KVM/XEN management software to allow device assignment of PCIe devices behind a PCIe switch only if it has ACS capability and with the P2P upstream forwarding bits enabled. This patch is intended to work for both KVM and Xen environments. Signed-off-by: Allen Kay <allen.m.kay@intel.com> Reviewed-by: Mathew Wilcox <willy@linux.intel.com> Reviewed-by: Chris Wright <chris@sous-sol.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-09-15uio: add generic driver for PCI 2.3 devicesMichael S. Tsirkin
This adds a generic uio driver that can bind to any PCI device. First user will be virtualization where a qemu userspace process needs to give guest OS access to the device. Interrupts are handled using the Interrupt Disable bit in the PCI command register and Interrupt Status bit in the PCI status register. All devices compliant to PCI 2.3 (circa 2002) and all compliant PCI Express devices should support these bits. Driver detects this support, and won't bind to devices which do not support the Interrupt Disable Bit in the command register. It's expected that more features of interest to virtualization will be added to this driver in the future. Possibilities are: mmap for device resources, MSI/MSI-X, eventfd (to interface with kvm), iommu. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Chris Wright <chrisw@redhat.com> Signed-off-by: Hans J. Koch <hjk@linutronix.de> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-22Merge git://git.infradead.org/~dwmw2/iommu-2.6.31Linus Torvalds
* git://git.infradead.org/~dwmw2/iommu-2.6.31: intel-iommu: Fix one last ia64 build problem in Pass Through Support VT-d: support the device IOTLB VT-d: cleanup iommu_flush_iotlb_psi and flush_unmaps VT-d: add device IOTLB invalidation support VT-d: parse ATSR in DMA Remapping Reporting Structure PCI: handle Virtual Function ATS enabling PCI: support the ATS capability intel-iommu: dmar_set_interrupt return error value intel-iommu: Tidy up iommu->gcmd handling intel-iommu: Fix tiny theoretical race in write-buffer flush. intel-iommu: Clean up handling of "caching mode" vs. IOTLB flushing. intel-iommu: Clean up handling of "caching mode" vs. context flushing. VT-d: fix invalid domain id for KVM context flush Fix !CONFIG_DMAR build failure introduced by Intel IOMMU Pass Through Support Intel IOMMU Pass Through Support Fix up trivial conflicts in drivers/pci/{intel-iommu.c,intr_remapping.c}
2009-06-11PCI MSI: Define PCI_MSI_MASK_32/64Hidetoshi Seto
Impact: cleanup, improve readability Define PCI_MSI_MASK_32/64 for 32/64bit devices, instead of using implicit offset (-4), "PCI_MSI_MASK_BIT - 4" and "PCI_MSI_MASK_BIT". Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-11PCI MSI: Remove unused/obsolete macros and definitionsHidetoshi Seto
Impact: cleanup, spec compliance This patch does: - Remove unused msi/msix_enable/disable macros. User should use msi/msix_set_enable() functions instead. - Remove unused msix_mask/unmask/pending macros. These macros are useless because they are not based on any of the PCI Local Bus Specifications properly. It seems that they were written based on a draft of PCI spec, and that the draft was the MSI-X ECN that underwent membership review in September 2002. (* In the draft, the size of a entry in MSI-X table was 64bit, containing 32bit message data and DWORD aligned lower address plus a pending bit and a mask bit.(30+1+1bit) The higher address was placed in MSI-X capability structure and shared by all entries.) - Remove PCI_MSIX_FLAGS_BITMASK. This definition also come from the draft ECN. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-05-18PCI: support the ATS capabilityYu Zhao
The PCIe ATS capability makes the Endpoint be able to request the DMA address translation from the IOMMU and cache the translation in the device side, thus alleviate IOMMU pressure and improve the hardware performance in the I/O virtualization environment. Signed-off-by: Yu Zhao <yu.zhao@intel.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-22PCI: only save/restore existent registers in the PCIe capabilityYu Zhao
PCIe 1.1 base neither requires the endpoint to implement the entire PCIe capability structure nor specifies default values of registers that are not implemented by the device. So we only save and restore registers that must be implemented by different device types if the device PCIe capability version is 1. PCIe 1.1 Capability Structure Expansion ECN and PCIe 2.0 requires all registers in the PCIe capability to be either implemented or hardwired to 0. Their PCIe capability version is 2. Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-26PCI: save and restore PCIe 2.0 registersYu Zhao
PCIe 2.0 defines several new registers (Device Control 2, Link Control 2, and Slot Control 2). Save and retore them in pci_save_pcie_state() and pci_restore_pcie_state(). Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20PCI: initialize and release SR-IOV capabilityYu Zhao
If a device has the SR-IOV capability, initialize it (set the ARI Capable Hierarchy in the lowest numbered PF if necessary; calculate the System Page Size for the VF MMIO, probe the VF Offset, Stride and BARs). A lock for the VF bus allocation is also initialized if a PF is the lowest numbered PF. Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20PCI: fix incorrect mask of PM No_Soft_Reset bitYu Zhao
Reviewed-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07PCI: pciehp: cleanup register and field definitionsKenji Kaneshige
Clean up register definitions related to PCI Express Hot plug. - Add register definitions into include/linux/pci_regs.h, and use them instead of pciehp's locally definied register definitions. - Remove pciehp's locally defined register definitions - Remove unused register definitions in pciehp. - Some minor cleanups. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07PCI: add PCI Advanced Feature Capability definesSheng Yang
PCI Advanced Features Capability is introduced by "Conventional PCI Advanced Caps ECN" (can be downloaded in pcisig.com). Add defines for the various AF capabilities, including function level reset (FLR). Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI: add support for function level resetSheng Yang
Sometimes, it's necessary to enable software's ability to quiesce and reset endpoint hardware with function-level granularity, so provide support for it. The patch implement Function Level Reset(FLR) feature following PCI-e spec. And this is the first step. We would add more generic method, like D0/D3, to allow more devices support this function. The patch contains two functions. pcie_reset_function() is the new driver API, and, contains some action to quiesce a device. The other function is a helper: pcie_execute_reset_function() just executes the reset for a particular device function. Current the usage model is in KVM. Function reset is necessary for assigning device to a guest, or moving it between partitions. For Function Level Reset(FLR), please refer to PCI Express spec chapter 6.6.2. Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-20PCI: support PCIe ARI capabilityYu Zhao
This patch adds support for PCI Express Alternative Routing-ID Interpretation (ARI) capability. The ARI capability extends the Function Number field of the PCI Express Endpoint by reusing the Device Number which is otherwise hardwired to 0. With ARI, an Endpoint can have up to 256 functions. Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-07-28PCI: disable ASPM on pre-1.1 PCIe devicesShaohua Li
Disable ASPM on pre-1.1 PCIe devices, as many of them don't implement it correctly. Tested-by: Jack Howarth <howarth@bromo.msbb.uc.edu> Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-07-07PCI: Simplify PCI device PM codeRafael J. Wysocki
If the offset of PCI device's PM capability in its configuration space, the mask of states that the device supports PME# from and the D1 and D2 support bits are cached in the corresponding struct pci_dev, the PCI device PM code can be simplified quite a bit. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-04-20PCI: add PCI Express ASPM supportShaohua Li
PCI Express ASPM defines a protocol for PCI Express components in the D0 state to reduce Link power by placing their Links into a low power state and instructing the other end of the Link to do likewise. This capability allows hardware-autonomous, dynamic Link power reduction beyond what is achievable by software-only controlled power management. However, The device should be configured by software appropriately. Enabling ASPM will save power, but will introduce device latency. This patch adds ASPM support in Linux. It introduces a global policy for ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control it. The interface can be used as a boot option too. Currently we have below setting: -default, BIOS default setting -powersave, highest power saving mode, enable all available ASPM state and clock power management -performance, highest performance, disable ASPM and clock power management By default, the 'default' policy is used currently. In my test, power difference between powersave mode and performance mode is about 1.3w in a system with 3 PCIE links. Note: some devices might not work well with aspm, either because chipset issue or device issue. The patch provide API (pci_disable_link_state), driver can disable ASPM for specific device. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-02Revert "PCI: PCIE ASPM support"Greg Kroah-Hartman
This reverts commit 6c723d5bd89f03fc3ef627d50f89ade054d2ee3b. It caused build errors on non-x86 platforms, config file confusion, and even some boot errors on some x86-64 boxes. All around, not quite ready for prime-time :( Cc: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-12 00:10:41 +0000