summaryrefslogtreecommitdiffstats
path: root/include/linux/power
AgeCommit message (Collapse)Author
2011-04-20isp1704_charger: Allow board specific powering routineKalle Jokiniemi
The ISP1704/1707 chip can be put to full power down state by asserting the CHIP_SEL line. This patch enables platform or board specific hooks to put the device into power down mode in case not needed. This patch is a preparation for enabling this powering routine in n900 (rx-51) devices. Thanks to Heikki Krogerus for helping out with the patch. Signed-off-by: Kalle Jokiniemi <kalle.jokiniemi@nokia.com> Acked-By: Heikki Krogerus <heikki.krogerus@nokia.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-04-20power_supply: Add driver for MAX8903 chargerMyungJoo Ham
MAX8903 is an integrated battery charger and selector with two power inputs (USB and AC adapter). This driver enables the charger, handles interrupts, and provides power-supply-class information to userland. Tested on Exynos4 NURI / S5PC210 SLP7 boards. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-03-01bq20z75: Add i2c retry mechanismRhyland Klein
With the support of platform data, now adding support for option i2c retries on read/write failures. Ths is specified through the optional platform data. Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-03-01bq20z75: Add optional battery detect gpioRhyland Klein
Adding support for an optional gpio for battery detection. This is passed in through the i2c platform data. It also accepts another field, battery_detect_present to signify the gpio state which means the battery is present, either 0 (low) or 1 (high). Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-02-22bq27x00: Add bq27000 supportLars-Peter Clausen
This patch adds support for the bq27000 battery to the bq27x00 driver. The bq27000 is similar to the bq27200 except that it uses the HDQ bus instead of I2C to communicate with the host system. The driver is implemented as a platform driver. The driver expects to be provided with a read callback function through its platform data. The read function is assumed to do the lowlevel HDQ handling and read out the value of a certain register. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Tested-by: Grazvydas Ignotas <notasas@gmail.com>
2011-01-14power_supply: Add MAX17042 Fuel Gauge DriverMyungJoo Ham
The MAX17042 is a fuel gauge with an I2C interface for lithium-ion betteries. Unlike its predecessor MAX17040, MAX17042 uses 16bit registers. Besides, MAX17042 has much more features than MAX17040; e.g., a thermistor, current and current accumulation measurement, battery internal resistance estimate, average values of measurement, and others. This patch implements a driver for MAX17042. In this initial release, we have implemented the most basic features of a fuel gauge: measure the battery capacity and voltage. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-11-18power_supply: Add gpio charger driverLars-Peter Clausen
This patch adds a simple driver for chargers indicating their online status through a GPIO pin. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-08-05POWER: Add JZ4740 battery driver.Lars-Peter Clausen
Add support for the battery voltage measurement part of the JZ4740 ADC unit. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1416/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>