summaryrefslogtreecommitdiffstats
path: root/include/net
AgeCommit message (Collapse)Author
2011-10-27ipv6: tcp: fix TCLASS value in ACK messages sent from TIME_WAITEric Dumazet
commit 66b13d99d96a (ipv4: tcp: fix TOS value in ACK messages sent from TIME_WAIT) fixed IPv4 only. This part is for the IPv6 side, adding a tclass param to ip6_xmit() We alias tw_tclass and tw_tos, if socket family is INET6. [ if sockets is ipv4-mapped, only IP_TOS socket option is used to fill TOS field, TCLASS is not taken into account ] Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-26Merge branch 'for-linus' of git://github.com/ericvh/linuxLinus Torvalds
* 'for-linus' of git://github.com/ericvh/linux: 9p: fix 9p.txt to advertise msize instead of maxdata net/9p: Convert net/9p protocol dumps to tracepoints fs/9p: change an int to unsigned int fs/9p: Cleanup option parsing in 9p 9p: move dereference after NULL check fs/9p: inode file operation is properly initialized init_special_inode fs/9p: Update zero-copy implementation in 9p
2011-10-24Merge branch 'master' of ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2011-10-24TCP: remove TCP_DEBUGFlavio Leitner
It was enabled by default and the messages guarded by the define are useful. Signed-off-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-24net/9p: Convert net/9p protocol dumps to tracepointsAneesh Kumar K.V
This helps in more control over debugging. root@qemu-img-64:~# ls /pass/123 ls: cannot access /pass/123: No such file or directory root@qemu-img-64:~# cat /sys/kernel/debug/tracing/trace # tracer: nop # # TASK-PID CPU# TIMESTAMP FUNCTION # | | | | | ls-1536 [001] 70.928584: 9p_protocol_dump: clnt 18446612132784021504 P9_TWALK(tag = 1) 000: 16 00 00 00 6e 01 00 01 00 00 00 02 00 00 00 01 010: 00 03 00 31 32 33 00 00 00 ff ff ff ff 00 00 00 ls-1536 [001] 70.928587: <stack trace> => trace_9p_protocol_dump => p9pdu_finalize => p9_client_rpc => p9_client_walk => v9fs_vfs_lookup => d_alloc_and_lookup => walk_component => path_lookupat ls-1536 [000] 70.929696: 9p_protocol_dump: clnt 18446612132784021504 P9_RLERROR(tag = 1) 000: 0b 00 00 00 07 01 00 02 00 00 00 4e 03 00 02 00 010: 00 00 00 00 03 00 02 00 00 00 00 00 ff 43 00 00 ls-1536 [000] 70.929697: <stack trace> => trace_9p_protocol_dump => p9_client_rpc => p9_client_walk => v9fs_vfs_lookup => d_alloc_and_lookup => walk_component => path_lookupat => do_path_lookup Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2011-10-24fs/9p: change an int to unsigned intDan Carpenter
Without this msize=4294967295 will result in a crash Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2011-10-24fs/9p: Update zero-copy implementation in 9pAneesh Kumar K.V
* remove lot of update to different data structure * add a seperate callback for zero copy request. * above makes non zero copy code path simpler * remove conditionalizing TREAD/TREADDIR/TWRITE in the zero copy path * Fix the dotu p9_check_errors with zero copy. Add sufficient doc around * Add support for both in and output buffers in zero copy callback * pin and unpin pages in the same context * use helpers instead of defining page offset and rest of page ourself * Fix mem leak in p9_check_errors * Remove 'E' and 'F' in p9pdu_vwritef Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2011-10-24ipv4: tcp: fix TOS value in ACK messages sent from TIME_WAITEric Dumazet
There is a long standing bug in linux tcp stack, about ACK messages sent on behalf of TIME_WAIT sockets. In the IP header of the ACK message, we choose to reflect TOS field of incoming message, and this might break some setups. Example of things that were broken : - Routing using TOS as a selector - Firewalls - Trafic classification / shaping We now remember in timewait structure the inet tos field and use it in ACK generation, and route lookup. Notes : - We still reflect incoming TOS in RST messages. - We could extend MuraliRaja Muniraju patch to report TOS value in netlink messages for TIME_WAIT sockets. - A patch is needed for IPv6 Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-24tcp: md5: add more const attributesEric Dumazet
Now tcp_md5_hash_header() has a const tcphdr argument, we can add more const attributes to callers. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-24tcp: md5: dont write skb head in tcp_md5_hash_header()Eric Dumazet
tcp_md5_hash_header() writes into skb header a temporary zero value, this might confuse other users of this area. Since tcphdr is small (20 bytes), copy it in a temporary variable and make the change in the copy. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-22inet: add rfc 3168 extract in front of INET_ECN_encapsulate()Eric Dumazet
INET_ECN_encapsulate() is better understood if we can read the official statement. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-21tcp: add const qualifiers where possibleEric Dumazet
Adding const qualifiers to pointers can ease code review, and spot some bugs. It might allow compiler to optimize code further. For example, is it legal to temporary write a null cksum into tcphdr in tcp_md5_hash_header() ? I am afraid a sniffer could catch the temporary null value... Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-20net: constify skbuff and Qdisc elementsEric Dumazet
Preliminary patch before tcp constification Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19caif-hsi: Added recovery check of CA wake status.Daniel Martensson
Added recovery check of CA wake status in case of wake up timeout. Added check of CA wake status in case of wake down timeout. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19caif-hsi: Added sanity check for length of CAIF framesDaniel Martensson
Added sanity check for length of CAIF frames, and tear down of CAIF link-layer device upon protocol error. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19caif-hsi: Make inactivity timeout configurable.Dmitry Tarnyagin
CAIF HSI uses a timer for inactivity. Upon timeout HSI-wake signaling is initiated to allow power-down of the HSI block. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19caif-hsi: Making read and writes asynchronous.Daniel Martensson
Some platforms do not allow to put HSI block into low-power mode when FIFO is not empty. The patch flushes (by reading) FIFO at wake down sequence. Asynchronous read and write is implemented for that. As a side effect this will also greatly improve performance. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-18macvlan: handle fragmented multicast framesEric Dumazet
Fragmented multicast frames are delivered to a single macvlan port, because ip defrag logic considers other samples are redundant. Implement a defrag step before trying to send the multicast frame. Reported-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-17Merge branch 'nf' of git://1984.lsi.us.es/netDavid S. Miller
2011-10-17udplite: fast-path computation of checksum coverageGerrit Renker
Commit 903ab86d195cca295379699299c5fc10beba31c7 of 1 March this year ("udp: Add lockless transmit path") introduced a new fast TX path that broke the checksum coverage computation of UDP-lite, which so far depended on up->len (only set if the socket is locked and 0 in the fast path). Fixed by providing both fast- and slow-path computation of checksum coverage. The latter can be removed when UDP(-lite)v6 also uses a lockless transmit path. Reported-by: Thomas Volkert <thomas@homer-conferencing.com> Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-17Merge branch 'master' of ↵John W. Linville
git://git.infradead.org/users/linville/wireless-next into for-davem
2011-10-14nl80211: Add sta_flags to the station infoHelmut Schaa
Reuse the already existing struct nl80211_sta_flag_update to specify both, a flag mask and the flag set itself. This means nl80211_sta_flag_update is now used for setting station flags and also for getting station flags. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14mac80211: Populate radiotap header with MCS info for TX framesHelmut Schaa
mac80211 already filled in the MCS rate info for rx'ed frames but tx'ed frames that are sent to a monitor interface during the status callback lack this information. Add the radiotap fields for MCS info to ieee80211_tx_status_rtap_hdr and populate them when sending tx'ed frames to the monitors. The needed headroom is only extended by one byte since we don't include legacy rate information in the rtap header for HT frames. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-12IPVS netns shutdown/startup dead-lockHans Schillstrom
ip_vs_mutext is used by both netns shutdown code and startup and both implicit uses sk_lock-AF_INET mutex. cleanup CPU-1 startup CPU-2 ip_vs_dst_event() ip_vs_genl_set_cmd() sk_lock-AF_INET __ip_vs_mutex sk_lock-AF_INET __ip_vs_mutex * DEAD LOCK * A new mutex placed in ip_vs netns struct called sync_mutex is added. Comments from Julian and Simon added. This patch has been running for more than 3 month now and it seems to work. Ver. 3 IP_VS_SO_GET_DAEMON in do_ip_vs_get_ctl protected by sync_mutex instead of __ip_vs_mutex as sugested by Julian. Signed-off-by: Hans Schillstrom <hans@schillstrom.com> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2011-10-11mac80211: parse radiotap header earlierJohannes Berg
We can now move the radiotap header parsing into ieee80211_monitor_start_xmit(). This moves it out of the hotpath, and also helps the code since now the radiotap header will no longer be present in ieee80211_xmit() etc. which is easier to understand. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-11mac80211: move fragment flag to info flag as dont-fragmentJohannes Berg
The purpose of this is two-fold: 1) by moving it out of tx_data.flags, we can in another patch move the radiotap parsing so it no longer is in the hotpath 2) if a device implements fragmentation but can optionally skip it, the radiotap request for not doing fragmentation may be honoured Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-11Merge branch 'master' of ↵John W. Linville
git://git.infradead.org/users/linville/wireless-next into for-davem Conflicts: Documentation/feature-removal-schedule.txt
2011-10-06dcb: Add stub routines for !CONFIG_DCBJohn Fastabend
To avoid ifdefs in the other code that supports DCB notifiers add stub routines. This method seems popular in other net code for example 8021Q. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-06dcb: add DCBX mode to event notifier attributesJohn Fastabend
Add DCBX mode to event notifiers so listeners can learn currently enabled mode. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-06dcb: Use ifindex instead of ifnameMark Rustad
Use ifindex instead of ifname in the DCB app ring. This makes for a smaller data structure and faster comparisons. It also avoids possible issues when a net device is renamed. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-04Merge branch 'master' of git://github.com/padovan/bluetooth-nextJohn W. Linville
2011-10-03mac80211: pass vif param to conf_tx() callbackEliad Peller
tx params should be configured per interface. add ieee80211_vif param to the conf_tx callback, and change all the drivers that use this callback. The following spatch was used: @rule1@ struct ieee80211_ops ops; identifier conf_tx_op; @@ ops.conf_tx = conf_tx_op; @rule2@ identifier rule1.conf_tx_op; identifier hw, queue, params; @@ conf_tx_op ( - struct ieee80211_hw *hw, + struct ieee80211_hw *hw, struct ieee80211_vif *vif, u16 queue, const struct ieee80211_tx_queue_params *params) {...} Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-03mac80211: Send nullfunc frames at lower rate during connection monitorRajkumar Manoharan
Recently mac80211 was changed to use nullfunc instead of probe request for connection monitoring for tx ack status reporting hardwares. Sometimes in congested network, STA got disconnected quickly after the association. It was observered that the rate control was not adopted to environment due to minimal transmission. As the nullfunc are used for monitoring purpose, these frames should not be sacrificed for rate control updation. So it is better to send the monitoring null func frames at minimum rate that could help to retain the connection. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-03mac80211: Allow noack flag overwrite for injected framesHelmut Schaa
Allow injected unicast frames to be sent without having to wait for an ACK. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30mac80211: document client powersaveJohannes Berg
With the addition of uAPSD and driver buffering the powersave handling has gotten quite complex. Add a section to the documentation to explain it for anyone wanting to implement it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30mac80211: allow out-of-band EOSP notificationJohannes Berg
iwlwifi has a separate EOSP notification from the device, and to make use of that properly it needs to be passed to mac80211. To be able to mix with tx_status_irqsafe and rx_irqsafe it also needs to be an "_irqsafe" version in the sense that it goes through the tasklet, the actual flag clearing would be IRQ-safe but doing it directly would cause reordering issues. This is needed in the case of a P2P GO going into an absence period without transmitting any frames that should be driver-released as in this case there's no other way to inform mac80211 that the service period ended. Note that for drivers that don't use the _irqsafe functions another version of this function will be required. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30mac80211: explicitly notify drivers of frame releaseJohannes Berg
iwlwifi needs to know the number of frames that are going to be sent to a station while it is asleep so it can properly handle the uCode blocking of that station. Before uAPSD, we got by by telling the device that a single frame was going to be released whenever we encountered IEEE80211_TX_CTL_POLL_RESPONSE. With uAPSD, however, that is no longer possible since there could be more than a single frame. To support this model, add a new callback to notify drivers when frames are going to be released. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30mac80211: reply only once to each PS-pollJohannes Berg
If a PS-poll frame is retried (but was received) there is no way to detect that since it has no sequence number. As a consequence, the standard asks us to not react to PS-poll frames until the response to one made it out (was ACKed or lost). Implement this by using the WLAN_STA_SP flags to also indicate a PS-Poll "service period" and the IEEE80211_TX_STATUS_EOSP flag for the response packet to indicate the end of the "SP" as usual. We could use separate flags, but that will most likely completely confuse drivers, and while the standard doesn't exclude simultaneously polling using uAPSD and PS-Poll, doing that seems quite problematic. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30mac80211: implement uAPSDJohannes Berg
Add uAPSD support to mac80211. This is probably not possible with all devices, so advertising it with the cfg80211 flag will be left up to drivers that want it. Due to my previous patches it is now a fairly straight-forward extension. Drivers need to have accurate TX status reporting for the EOSP frame. For drivers that buffer themselves, the provided APIs allow releasing the right number of frames, but then drivers need to set EOSP and more-data themselves. This is documented in more detail in the new code itself. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30mac80211: allow releasing driver-buffered framesJohannes Berg
If there are frames for a station buffered in the driver, mac80211 announces those in the TIM IE but there's no way to release them. Add new API to release such frames and use it when the station polls for a frame. Since the API will soon also be used for uAPSD it is easily extensible. Note that before this change drivers announcing driver-buffered frames in the TIM bit actually will respond to a PS-Poll with a potentially lower priority frame (if there are any frames buffered in mac80211), after this patch a driver that hasn't been changed will no longer respond at all. This only affects ath9k, which will need to be fixed to implement the new API. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30mac80211: split PS buffers into ACsJohannes Berg
For uAPSD support we'll need to have per-AC PS buffers. As this is a major undertaking, split the buffers before really adding support for uAPSD. This already makes some reference to the uapsd_queues variable, but for now that will never be non-zero. Since book-keeping is complicated, also change the logic for keeping a maximum of frames only and allow 64 frames per AC (up from 128 for a station). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30mac80211: let drivers inform it about per TID buffered framesJohannes Berg
For uAPSD implementation, it is necessary to know on which ACs frames are buffered. mac80211 obviously knows about the frames it has buffered itself, but with aggregation many drivers buffer frames. Thus, mac80211 needs to be informed about this. For now, since we don't have APSD in any form, this will unconditionally set the TIM bit for the station but later with uAPSD only some ACs might cause the TIM bit to be set. ath9k is the only driver using this API and I only modify it in the most basic way, it won't be able to implement uAPSD with this yet. But it can't do that anyway since there's no way to selectively release frames to the peer yet. Since drivers will buffer frames per TID, let them inform mac80211 on a per TID basis, mac80211 will then sort out the AC mapping itself. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30mac80211: standardize adding supported rates IEsArik Nemtsov
Relocate the mesh implementation of adding the (extended) supported rates IE to util.c, anticipating its use by other parts of mac80211. Signed-off-by: Arik Nemtsov <arik@wizery.com> Cc: Kalyan C Gaddam <chakkal@iit.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30nl80211: support sending TDLS commands/framesArik Nemtsov
Add support for sending high-level TDLS commands and TDLS frames via NL80211_CMD_TDLS_OPER and NL80211_CMD_TDLS_MGMT, respectively. Add appropriate cfg80211 callbacks for lower level drivers. Add wiphy capability flags for TDLS support and advertise them via nl80211. Signed-off-by: Arik Nemtsov <arik@wizery.com> Cc: Kalyan C Gaddam <chakkal@iit.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30cfg80211/mac80211: apply station uAPSD parameters selectivelyJohannes Berg
Currently, when hostapd sets the station as authorized we also overwrite its uAPSD parameter. This obviously leads to buggy behaviour (later, with my patches that actually add uAPSD support). To fix this, only apply those parameters if they were actually set in nl80211, and to achieve that add a bitmap of things to apply. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-30Merge branch 'master' of ↵John W. Linville
git://git.infradead.org/users/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/iwlwifi/iwl-pci.c drivers/net/wireless/wl12xx/main.c
2011-09-28af_unix: dont send SCM_CREDENTIALS by defaultEric Dumazet
Since commit 7361c36c5224 (af_unix: Allow credentials to work across user and pid namespaces) af_unix performance dropped a lot. This is because we now take a reference on pid and cred in each write(), and release them in read(), usually done from another process, eventually from another cpu. This triggers false sharing. # Events: 154K cycles # # Overhead Command Shared Object Symbol # ........ ....... .................. ......................... # 10.40% hackbench [kernel.kallsyms] [k] put_pid 8.60% hackbench [kernel.kallsyms] [k] unix_stream_recvmsg 7.87% hackbench [kernel.kallsyms] [k] unix_stream_sendmsg 6.11% hackbench [kernel.kallsyms] [k] do_raw_spin_lock 4.95% hackbench [kernel.kallsyms] [k] unix_scm_to_skb 4.87% hackbench [kernel.kallsyms] [k] pid_nr_ns 4.34% hackbench [kernel.kallsyms] [k] cred_to_ucred 2.39% hackbench [kernel.kallsyms] [k] unix_destruct_scm 2.24% hackbench [kernel.kallsyms] [k] sub_preempt_count 1.75% hackbench [kernel.kallsyms] [k] fget_light 1.51% hackbench [kernel.kallsyms] [k] __mutex_lock_interruptible_slowpath 1.42% hackbench [kernel.kallsyms] [k] sock_alloc_send_pskb This patch includes SCM_CREDENTIALS information in a af_unix message/skb only if requested by the sender, [man 7 unix for details how to include ancillary data using sendmsg() system call] Note: This might break buggy applications that expected SCM_CREDENTIAL from an unaware write() system call, and receiver not using SO_PASSCRED socket option. If SOCK_PASSCRED is set on source or destination socket, we still include credentials for mere write() syscalls. Performance boost in hackbench : more than 50% gain on a 16 thread machine (2 quad-core cpus, 2 threads per core) hackbench 20 thread 2000 4.228 sec instead of 9.102 sec Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-27Bluetooth: Perform L2CAP SDU reassembly without copying dataMat Martineau
Use sk_buff fragment capabilities to link together incoming skbs instead of allocating a new skb for reassembly and copying. The new reassembly code works equally well for ERTM and streaming mode, so there is now one reassembly function instead of two. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-27cfg80211/mac80211: add netdev param to set_txq_params()Eliad Peller
tx params are currently configured per hw, although they should be configured per interface. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-27mac80211: Send the management frame at requested rateRajkumar Manoharan
Whenever the scan request or tx_mgmt is requesting not to use CCK rate for managemet frames through NL80211_ATTR_TX_NO_CCK_RATE attribute, then mac80211 should select appropriate least non-CCK rate. This could help to send P2P probes and P2P action frames at non 11b rates without diabling 11b rates globally. Cc: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-25 12:00:03 +0000