summaryrefslogtreecommitdiffstats
path: root/include/net
AgeCommit message (Collapse)Author
2013-10-07Bluetooth: Make mgmt_set_powered_failed() return voidMarcel Holtmann
The return value of mgmt_set_powered_failed() function is never used and so make the function just return void. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-07Bluetooth: Make mgmt_index_added() and mgmt_index_removed() return voidMarcel Holtmann
The return value from mgmt_index_added() and mgmt_index_removed() functions is never used. So do not pretend that returning an error would actually be handled and just make both functions return void. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-06Bluetooth: Remove mgmt_valid_hdev() helper functionMarcel Holtmann
The helper function mgmt_valid_hdev() is more obfuscating the code then it makes it easier to read. So intead of this helper, use the direct check for BR/EDR device type. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-06Bluetooth: Remove no longer needed mgmt_new_settings() functionMarcel Holtmann
The mgmt_new_settings() function was only needed to handle the error case when re-enabling advertising failed. Since that is now handled internally inside the management core, this function is not needed anymore. So just remove it. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-06Bluetooth: Use helper function for re-enabling advertisingMarcel Holtmann
When the all LE connections have been disconneted, then it is up to the host to re-enable advertising at that point. To ensure that the correct advertising parameters are used, force the usage of the common helper to enable advertising. The change just moves the manual enabling of advertising from the event handler into the management core so that the helper can be actually shared. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-06Bluetooth: Add constants for LE advertising typesMarcel Holtmann
Add constants for ADV_IND, ADV_DIRECT_IND, ADV_SCAN_IND and ADV_NONCONN_IND advertising types. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-06Bluetooth: Add HCI structure for LE advertising parameters commandMarcel Holtmann
Add the basic HCI structure for building the LE advertising parameters command. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-06Bluetooth: Move hci_amp_capable() function into L2CAP coreMarcel Holtmann
The hci_amp_capable() function has only a single user inside the L2CAP core. Instead of exporting the function, place it next to its user. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-06Bluetooth: Rename AMP status constants and use themMarcel Holtmann
The AMP controller status constants need to be actually used to avoid crypted hardcoded numbers. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-06Bluetooth: Use explicit AMP controller id value for BR/EDRMarcel Holtmann
The special AMP controller id 0 is reserved for the BR/EDR controller that has the main link. It is a fixed value and so use a constant for this throughout the code to make it more visible when the handling is for the BR/EDR channel or when it is for the AMP channel. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-06Bluetooth: Separate AMP controller type from HCI device typeMarcel Holtmann
There are two defined HCI device types. One is for BR/EDR controllers and the other is for AMP controllers. The HCI device type is not the same as the AMP controller type. It just happens that currently the defined types match, but that is not guaranteed. Split the usage of AMP controller type into its own domain so that it is possible to separate between BR/EDR controllers, 802.11 AMP controllers and any other AMP technology that might be defined in the future. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-06Bluetooth: Add constants for AMP controller typeMarcel Holtmann
Add the constants for BR/EDR and 802.11 AMP controller types. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-06Bluetooth: Remove useless external function to count controllersMarcel Holtmann
The list of controllers can be counted ahead of time and inline inside the AMP discover handling. There is no need to export such a function at all. In addition just count the AMP controller and only allocated space for a single mandatory BR/EDR controller. No need to allocate more space than needed. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-05Bluetooth: Add public mgmt function to send New Settings eventJohan Hedberg
A function is needed so that the HCI event processing can ask the mgmt code to emit a new settings event. This is necessary e.g. when the event processing does updates to mgmt related states without any dependency of actual mgmt commands. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-05Bluetooth: Rename HCI_LE_PERIPHERAL to HCI_ADVERTISINGJohan Hedberg
This flag is used to indicate whether we want to have advertising enabled or not, so give it a more suitable name. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-03tcp: shrink tcp6_timewait_sock by one cache lineEric Dumazet
While working on tcp listener refactoring, I found that it would really make things easier if sock_common could include the IPv6 addresses needed in the lookups, instead of doing very complex games to get their values (depending on sock being SYN_RECV, ESTABLISHED, TIME_WAIT) For this to happen, I need to be sure that tcp6_timewait_sock and tcp_timewait_sock consume same number of cache lines. This is possible if we only use 32bits for tw_ttd, as we remove one 32bit hole in inet_timewait_sock inet_tw_time_stamp() is defined and used, even if its current implementation looks like tcp_time_stamp : We might need finer resolution for tcp_time_stamp in the future. Before patch : sizeof(struct tcp6_timewait_sock) = 0xc8 After patch : sizeof(struct tcp6_timewait_sock) = 0xc0 Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-03Merge branch 'for-upstream' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
2013-10-03flow_dissector: factor out the ports extraction in skb_flow_get_portsNikolay Aleksandrov
Factor out the code that extracts the ports from skb_flow_dissect and add a new function skb_flow_get_ports which can be re-used. Suggested-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-03inet: consolidate INET_TW_MATCHEric Dumazet
TCP listener refactoring, part 2 : We can use a generic lookup, sockets being in whatever state, if we are sure all relevant fields are at the same place in all socket types (ESTABLISH, TIME_WAIT, SYN_RECV) This patch removes these macros : inet_addrpair, inet_addrpair, tw_addrpair, tw_portpair And adds : sk_portpair, sk_addrpair, sk_daddr, sk_rcv_saddr Then, INET_TW_MATCH() is really the same than INET_MATCH() Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-02Bluetooth: Add the definition for Slave Page Response TimeoutDoHyun Pyun
The Slave Page Response Timeout event indicates to the Host that a slave page response timeout has occurred in the BR/EDR Controller. The Core Spec Addendum 4 adds this command in part B Connectionless Slave Broadcast. Bluetooth Core Specification Addendum 4 - Page 110 "7.7.72 Slave Page Response Timeout Event [New Section] ... Note: this event will be generated if the slave BR/EDR Controller responds to a page but does not receive the master FHS packet (see Baseband, Section 8.3.3) within pagerespTO. Event Parameters: NONE" Signed-off-by: Dohyun Pyun <dh79.pyun@samsung.com> Signed-off-by: C S Bhargava <cs.bhargava@samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-02Bluetooth: Add the definition and stcuture for Sync Train CompleteDoHyun Pyun
The Synchronization Train Complete event indicates that the Start Synchronization Train command has completed. The Core Spec Addendum 4 adds this command in part B Connectionless Slave Broadcast. Bluetooth Core Specification Addendum 4 - Page 103 "7.7.67 Synchronization Train Complete Event [New Section] ... Event Parameters: Status 0x00 Start Synchronization Train command completed successfully. 0x01-0xFF Start Synchronization Train command failed. See Part D, Error Codes, for error codes and descriptions." Signed-off-by: Dohyun Pyun <dh79.pyun@samsung.com> Signed-off-by: C S Bhargava <cs.bhargava@samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-02Bluetooth: Add the definition for Start Synchronization TrainDoHyun Pyun
The Start_Synchronization_Train command controls the Synchronization Train functionality in the BR/EDR Controller. The Core Spec Addendum 4 adds this command in part B Connectionless Slave Broadcast. Bluetooth Core Specification Addendum 4 - Page 86 "7.1.51 Start Synchronization Train Command [New Section] ... If connectionless slave broadcast mode is not enabled, the Command Disallowed (0x0C) error code shall be returned. After receiving this command and returning a Command Status event, the Baseband starts attempting to send synchronization train packets containing information related to the enabled Connectionless Slave Broadcast packet timing. Note: The AFH_Channel_Map used in the synchronization train packets is configured by the Set_AFH_Channel_Classification command and the local channel classification in the BR/EDR Controller. The synchronization train packets will be sent using the parameters specified by the latest Write_Synchronization_Train_Parameters command. The Synchronization Train will continue until synchronization_trainTO slots (as specified in the last Write_Synchronization_Train command) have passed or until the Host disables the Connectionless Slave Broadcast logical transport." Signed-off-by: Dohyun Pyun <dh79.pyun@samsung.com> Signed-off-by: C S Bhargava <cs.bhargava@samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-02Bluetooth: Add the definition and structure for Set CSBDoHyun Pyun
he Set_Connectionless_Slave_Broadcast command controls the Connectionless Slave Broadcast functionality in the BR/EDR Controller. The Core Spec Addendum 4 adds this command in part B Connectionless Slave Broadcast. Bluetooth Core Specification Addendum 4 - Page 78 "7.1.49 Set Connectionless Slave Broadcast Command [New Section] ... The LT_ADDR indicated in the Set_Connectionless_Slave_Broadcast shall be pre-allocated using the HCI_Set_Reserved_LT_ADDR command. If the LT_ADDR has not been reserved, the Unknown Connection Identifier (0x02) error code shall be returned. If the controller is unable to reserve sufficient bandwidth for the requested activity, the Connection Rejected Due to Limited Resources (0x0D) error code shall be returned. The LPO_Allowed parameter informs the BR/EDR Controller whether it is allowed to sleep. The Packet_Type parameter specifies which packet types are allowed. The Host shall either enable BR packet types only, or shall enable EDR and DM1 packet types only. The Interval_Min and Interval_Max parameters specify the range from which the BR/EDR Controller must select the Connectionless Slave Broadcast Interval. The selected Interval is returned." Signed-off-by: Dohyun Pyun <dh79.pyun@samsung.com> Signed-off-by: C S Bhargava <cs.bhargava@samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-02Bluetooth: Add the structure for Write Sync Train ParametersDoHyun Pyun
The Write_Synchronization_Train_Parameters command configures the Synchronization Train functionality in the BR/EDR Controller. The Core Spec Addendum 4 adds this command in part B Connectionless Slave Broadcast. Bluetooth Core Specification Addendum 4 - Page 97 "7.3.90 Write Synchronization Train Parameters Command [New Section] ... Note: The AFH_Channel_Map used in the Synchronization Train packets is configured by the Set_AFH_Channel_Classification command and the local channel classification in the BR/EDR Controller. Interval_Min and Interval_Max specify the allowed range of Sync_Train_Interval. Refer to [Vol. 2], Part B, section 2.7.2 for a detailed description of Sync_Train_Interval. The BR/EDR Controller shall select an interval from this range and return it in Sync_Train_Interval. If the Controller is unable to select a value from this range, it shall return the Invalid HCI Command Parameters (0x12) error code. Once started (via the Start_Synchronization_Train Command) the Synchronization Train will continue until synchronization_trainTO slots have passed or Connectionless Slave Broadcast has been disabled." Signed-off-by: Dohyun Pyun <dh79.pyun@samsung.com> Signed-off-by: C S Bhargava <cs.bhargava@samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-02Bluetooth: Add the definition and structure for Set CSB DataDoHyun Pyun
The Set_Connectionless_Slave_Broadcast_Data command provides the ability for the Host to set Connectionless Slave Broadcast data in the BR/EDR Controller. The Core Spec Addendum 4 adds this command in part B Connectionless Slave Broadcast. Bluetooth Core Specification Addendum 4 - Page 93 "7.3.88 Set Connectionless Slave Broadcast Data Command [New Section] ... If connectionless slave broadcast mode is disabled, this data shall be kept by the BR/EDR Controller and used once connectionless slave broadcast mode is enabled. If connectionless slave broadcast mode is enabled, and this command is successful, this data will be sent starting with the next Connectionless Slave Broadcast instant. The Data_Length field may be zero, in which case no data needs to be provided. The Host may fragment the data using the Fragment field in the command. If the combined length of the fragments exceeds the capacity of the largest allowed packet size specified in the Set Connectionless Slave Broadcast command, all fragments associated with the data being assembled shall be discarded and the Invalid HCI Command Parameters error (0x12) shall be returned." Signed-off-by: Dohyun Pyun <dh79.pyun@samsung.com> Signed-off-by: C S Bhargava <cs.bhargava@samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-02Bluetooth: Add the definition and structure for Delete Reserved LT_ADDRDoHyun Pyun
The Delete_Reserved_LT_ADDR command requests that the BR/EDR Controller cancel the reservation for a specific LT_ADDR reserved for the purposes of Connectionless Slave Broadcast. The Core Spec Addendum 4 adds this command in part B Connectionless Slave Broadcast. Bluetooth Core Specification Addendum 4 - Page 92 "7.3.87 Delete Reserved LT_ADDR Command [New Section] ... If the LT_ADDR indicated in the LT_ADDR parameter is not reserved by the BR/EDR Controller, it shall return the Unknown Connection Identifier (0x02) error code. If connectionless slave broadcast mode is still active, then the Controller shall return the Command Disallowed (0x0C) error code." Signed-off-by: Dohyun Pyun <dh79.pyun@samsung.com> Signed-off-by: C S Bhargava <cs.bhargava@samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-02Bluetooth: Add the definition and structure for Set Reserved LT_ADDRDoHyun Pyun
The Set_Reserved_LT_ADDR command allows the host to request that the BR/EDR Controller reserve a specific LT_ADDR for Connectionless Slave Broadcast. The Core Spec Addendum 4 adds this command in part B Connectionless Slave Broadcast. Bluetooth Core Specification Addendum 4 - Page 90 "7.3.86 Set Reserved LT_ADDR Command [New Section] ... If the LT_ADDR indicated in the LT_ADDR parameter is already in use by the BR/EDR Controller, it shall return the ACL Connection Already Exists (0x0B) error code. If the LT_ADDR indicated in the LT_ADDR parameter is out of range, the controller shall return the Invalid HCI Command Parameters (0x12) error code. If the command succeeds, then the reserved LT_ADDR shall be used when issuing subsequent Set Connectionless Slave Broadcast Data and Set Connectionless Slave Broadcast commands. To ensure that the reserved LT_ADDR is not already allocated, it is recommended that this command be issued at some point after HCI_Reset is issued but before page scanning is enabled or paging is initiated." Signed-off-by: Dohyun Pyun <dh79.pyun@samsung.com> Signed-off-by: C S Bhargava <cs.bhargava@samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-02mac80211: implement STA CSA for drivers using channel contextsArik Nemtsov
Limit the current implementation to a single channel context used by a single vif, thereby avoiding multi-vif/channel complexities. Reuse the main function from AP CSA code, but move a portion out in order to fit the STA scenario. Add a new mac80211 HW flag so we don't break devices that don't support channel switch with channel-contexts. The new behavior will be opt-in. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-02Bluetooth: Add management command for setting static addressMarcel Holtmann
On dual-mode BR/EDR/LE and LE only controllers it is possible to configure a random address. There are two types or random addresses, one is static and the other private. Since the random private addresses require special privacy feature to be supported, the configuration of these two are kept separate. This command allows for setting the static random address. It is only supported on controllers with LE support. The static random address is suppose to be valid for the lifetime of the controller or at least until the next power cycle. To ensure such behavior, setting of the address is limited to when the controller is powered off. The special BDADDR_ANY address (00:00:00:00:00:00) can be used to disable the static address. This is also the default value. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-02Bluetooth: Add a new mgmt_set_bredr commandJohan Hedberg
This patch introduces a new mgmt command for enabling/disabling BR/EDR functionality. This can be convenient when one wants to make a dual-mode controller behave like a single-mode one. The command is only available for dual-mode controllers and requires that LE is enabled before using it. The BR/EDR setting can be enabled at any point, however disabling it requires the controller to be powered off (otherwise a "rejected" response will be sent). Disabling the BR/EDR setting will automatically disable all other BR/EDR related settings. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-02Bluetooth: Introduce a new HCI_BREDR_ENABLED flagJohan Hedberg
To allow treating dual-mode (BR/EDR/LE) controllers as single-mode ones (LE-only) we want to introduce a new HCI_BREDR_ENABLED flag to track whether BR/EDR is enabled or not (previously we simply looked at the feature bit with lmp_bredr_enabled). This patch add the new flag and updates the relevant places to test against it instead of using lmp_bredr_enabled. The flag is by default enabled when registering an adapter and only cleared if necessary once the local features have been read during the HCI init procedure. We cannot completely block BR/EDR usage in case user space uses raw HCI sockets but the patch tries to block this in places where possible, such as the various BR/EDR specific ioctls. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-02Bluetooth: Provide high speed configuration optionMarcel Holtmann
Hiding the Bluetooth high speed support behind a module parameter is not really useful. This can be enabled and disabled at runtime via the management interface. This also has the advantage that this can now be changed per controller and not just global. This patch removes the module parameter and exposes the high speed setting of the management interface to all controllers. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-02Bluetooth: Replace BDADDR_LOCAL with BDADDR_NONEMarcel Holtmann
The BDADDR_LOCAL is a relict from userspace and has never been used within the kernel. So remove that constant and replace it with a new BDADDR_NONE that is similar to HCI_DEV_NONE with all bits set. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/emulex/benet/be.h drivers/net/usb/qmi_wwan.c drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h include/net/netfilter/nf_conntrack_synproxy.h include/net/secure_seq.h The conflicts are of two varieties: 1) Conflicts with Joe Perches's 'extern' removal from header file function declarations. Usually it's an argument signature change or a function being added/removed. The resolutions are trivial. 2) Some overlapping changes in qmi_wwan.c and be.h, one commit adds a new value, another changes an existing value. That sort of thing. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== The following patchset contains Netfilter/IPVS fixes for your net tree, they are: * Fix BUG_ON splat due to malformed TCP packets seen by synproxy, from Patrick McHardy. * Fix possible weight overflow in lblc and lblcr schedulers due to 32-bits arithmetics, from Simon Kirby. * Fix possible memory access race in the lblc and lblcr schedulers, introduced when it was converted to use RCU, two patches from Julian Anastasov. * Fix hard dependency on CPU 0 when reading per-cpu stats in the rate estimator, from Julian Anastasov. * Fix race that may lead to object use after release, when invoking ipvsadm -C && ipvsadm -R, introduced when adding RCU, from Julian Anastasov. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01mac80211: support reporting A-MSDU subframes individuallyMichal Kazior
Some devices may not be able to report A-MSDUs in single buffers. Drivers for such devices were forced to re-assemble A-MSDUs which would then be eventually disassembled by mac80211. This could lead to CPU cache thrashing and poor performance. Since A-MSDU has a single sequence number all subframes share it. This was in conflict with retransmission/duplication recovery (IEEE802.11-2012: 9.3.2.10). Patch introduces a new flag that is meant to be set for all individually reported A-MSDU subframes except the last one. This ensures the last_seq_ctrl is updated after the last subframe is processed. If an A-MSDU is actually a duplicate transmission all reported subframes will be properly discarded. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> [johannes: add braces that were missing even before] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-01mac80211: add explicit IBSS driver operationsJohannes Berg
This can be useful for drivers if they have any failure cases when joining an IBSS. Also move setting the queue parameters to before this new call, in case the new driver op needs them already. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-09-30net: add missing sk_max_pacing_rate docEric Dumazet
Warning(include/net/sock.h:411): No description found for parameter 'sk_max_pacing_rate' Lets please "make htmldocs" and kbuild bot. Reported-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-30net ipv4: Convert ipv4.ip_local_port_range to be per netns v3Eric W. Biederman
- Move sysctl_local_ports from a global variable into struct netns_ipv4. - Modify inet_get_local_port_range to take a struct net, and update all of the callers. - Move the initialization of sysctl_local_ports into sysctl_net_ipv4.c:ipv4_sysctl_init_net from inet_connection_sock.c v2: - Ensure indentation used tabs - Fixed ip.h so it applies cleanly to todays net-next v3: - Compile fixes of strange callers of inet_get_local_port_range. This patch now successfully passes an allmodconfig build. Removed manual inlining of inet_get_local_port_range in ipv4_local_port_range Originally-by: Samya <samya@twitter.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-30Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Conflicts: include/net/xfrm.h Simple conflict between Joe Perches "extern" removal for function declarations in header files and the changes in Steffen's tree. Steffen Klassert says: ==================== Two patches that are left from the last development cycle. Manual merging of include/net/xfrm.h is needed. The conflict can be solved as it is currently done in linux-next. 1) We announce the creation of temporary acquire state via an asyc event, so the deletion should be annunced too. From Nicolas Dichtel. 2) The VTI tunnels do not real tunning, they just provide a routable IPsec tunnel interface. So introduce and use xfrm_tunnel_notifier instead of xfrm_tunnel for xfrm tunnel mode callback. From Fan Du. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-30vxlan: Use RCU apis to access sk_user_data.Pravin B Shelar
Use of RCU api makes vxlan code easier to understand. It also fixes bug due to missing ACCESS_ONCE() on sk_user_data dereference. In rare case without ACCESS_ONCE() compiler might omit vs on sk_user_data dereference. Compiler can use vs as alias for sk->sk_user_data, resulting in multiple sk_user_data dereference in rcu read context which could change. CC: Jesse Gross <jesse@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-30netfilter: synproxy: fix BUG_ON triggered by corrupt TCP packetsPatrick McHardy
TCP packets hitting the SYN proxy through the SYNPROXY target are not validated by TCP conntrack. When th->doff is below 5, an underflow happens when calculating the options length, causing skb_header_pointer() to return NULL and triggering the BUG_ON(). Handle this case gracefully by checking for NULL instead of using BUG_ON(). Reported-by: Martin Topholm <mph@one.com> Tested-by: Martin Topholm <mph@one.com> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-09-28net: introduce SO_MAX_PACING_RATEEric Dumazet
As mentioned in commit afe4fd062416b ("pkt_sched: fq: Fair Queue packet scheduler"), this patch adds a new socket option. SO_MAX_PACING_RATE offers the application the ability to cap the rate computed by transport layer. Value is in bytes per second. u32 val = 1000000; setsockopt(sockfd, SOL_SOCKET, SO_MAX_PACING_RATE, &val, sizeof(val)); To be effectively paced, a flow must use FQ packet scheduler. Note that a packet scheduler takes into account the headers for its computations. The effective payload rate depends on MSS and retransmits if any. I chose to make this pacing rate a SOL_SOCKET option instead of a TCP one because this can be used by other protocols. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Steinar H. Gunderson <sesse@google.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-28ipv4: processing ancillary IP_TOS or IP_TTLFrancesco Fusco
If IP_TOS or IP_TTL are specified as ancillary data, then sendmsg() sends out packets with the specified TTL or TOS overriding the socket values specified with the traditional setsockopt(). The struct inet_cork stores the values of TOS, TTL and priority that are passed through the struct ipcm_cookie. If there are user-specified TOS (tos != -1) or TTL (ttl != 0) in the struct ipcm_cookie, these values are used to override the per-socket values. In case of TOS also the priority is changed accordingly. Two helper functions get_rttos and get_rtconn_flags are defined to take into account the presence of a user specified TOS value when computing RT_TOS and RT_CONN_FLAGS. Signed-off-by: Francesco Fusco <ffusco@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-28ipv4: IP_TOS and IP_TTL can be specified as ancillary dataFrancesco Fusco
This patch enables the IP_TTL and IP_TOS values passed from userspace to be stored in the ipcm_cookie struct. Three fields are added to the struct: - the TTL, expressed as __u8. The allowed values are in the [1-255]. A value of 0 means that the TTL is not specified. - the TOS, expressed as __s16. The allowed values are in the range [0,255]. A value of -1 means that the TOS is not specified. - the priority, expressed as a char and computed when handling the ancillary data. Signed-off-by: Francesco Fusco <ffusco@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-28net: net_secret should not depend on TCPEric Dumazet
A host might need net_secret[] and never open a single socket. Problem added in commit aebda156a570782 ("net: defer net_secret[] initialization") Based on prior patch from Hannes Frederic Sowa. Reported-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Hannes Frederic Sowa <hannes@strressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-28net: Delay default_device_exit_batch until no devices are unregistering v2Eric W. Biederman
There is currently serialization network namespaces exiting and network devices exiting as the final part of netdev_run_todo does not happen under the rtnl_lock. This is compounded by the fact that the only list of devices unregistering in netdev_run_todo is local to the netdev_run_todo. This lack of serialization in extreme cases results in network devices unregistering in netdev_run_todo after the loopback device of their network namespace has been freed (making dst_ifdown unsafe), and after the their network namespace has exited (making the NETDEV_UNREGISTER, and NETDEV_UNREGISTER_FINAL callbacks unsafe). Add the missing serialization by a per network namespace count of how many network devices are unregistering and having a wait queue that is woken up whenever the count is decreased. The count and wait queue allow default_device_exit_batch to wait until all of the unregistration activity for a network namespace has finished before proceeding to unregister the loopback device and then allowing the network namespace to exit. Only a single global wait queue is used because there is a single global lock, and there is a single waiter, per network namespace wait queues would be a waste of resources. The per network namespace count of unregistering devices gives a progress guarantee because the number of network devices unregistering in an exiting network namespace must ultimately drop to zero (assuming network device unregistration completes). The basic logic remains the same as in v1. This patch is now half comment and half rtnl_lock_unregistering an expanded version of wait_event performs no extra work in the common case where no network devices are unregistering when we get to default_device_exit_batch. Reported-by: Francesco Ruggeri <fruggeri@aristanetworks.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-28IPv6 NAT: Do not drop DNATed 6to4/6rd packetsCatalin\(ux\) M. BOIE
When a router is doing DNAT for 6to4/6rd packets the latest anti-spoofing commit 218774dc ("ipv6: add anti-spoofing checks for 6to4 and 6rd") will drop them because the IPv6 address embedded does not match the IPv4 destination. This patch will allow them to pass by testing if we have an address that matches on 6to4/6rd interface. I have been hit by this problem using Fedora and IPV6TO4_IPV4ADDR. Also, log the dropped packets (with rate limit). Signed-off-by: Catalin(ux) M. BOIE <catab@embedromix.ro> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-27ipv6: avoid high order memory allocations for /proc/net/ipv6_routeHannes Frederic Sowa
Dumping routes on a system with lots rt6_infos in the fibs causes up to 11-order allocations in seq_file (which fail). While we could switch there to vmalloc we could just implement the streaming interface for /proc/net/ipv6_route. This patch switches /proc/net/ipv6_route from single_open_net to seq_open_net. loff_t *pos tracks dst entries. Also kill never used struct rt6_proc_arg and now unused function fib6_clean_all_ro. Cc: Ben Greear <greearb@candelatech.com> Cc: Patrick McHardy <kaber@trash.net> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-27Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem Also fixed-up a badly indented closing brace... Signed-off-by: John W. Linville <linville@tuxdriver.com>