summaryrefslogtreecommitdiffstats
path: root/include/scsi
AgeCommit message (Collapse)Author
2014-07-06Merge tag 'scsi-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is a set of 13 fixes, a MAINTAINERS update and a sparse update. The fixes are mostly correct value initialisations, avoiding NULL derefs and some uninitialised pointer avoidance. All the patches have been incubated in -next for a few days. The final patch (use the scsi data buffer length to extract transfer size) has been rebased to add a cc to stable, but only the commit message has changed" * tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] use the scsi data buffer length to extract transfer size virtio-scsi: fix various bad behavior on aborted requests virtio-scsi: avoid cancelling uninitialized work items ibmvscsi: Add memory barriers for send / receive ibmvscsi: Abort init sequence during error recovery qla2xxx: Fix sparse warning in qla_target.c. bnx2fc: Improve stats update mechanism bnx2fc: do not scan uninitialized lists in case of error. fc: ensure scan_work isn't active when freeing fc_rport pm8001: Fix potential null pointer dereference and memory leak. MAINTAINERS: Update LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI) maintainers Email IDs be2iscsi: remove potential junk pointer free be2iscsi: add an missing goto in error path scsi_error: set DID_TIME_OUT correctly scsi_error: fix invalid setting of host byte
2014-07-03[SCSI] use the scsi data buffer length to extract transfer sizeMartin K. Petersen
Commit 8846bab180fa introduced a helper that can be used to query the wire transfer size for a SCSI command taking protection information into account. However, some commands do not have a 1:1 mapping between the block range they work on and the payload size (discard, write same). After the scatterlist has been set up these requests use __data_len to store the number of bytes to report completion on. This means that callers of scsi_transfer_length() would get the wrong byte count for these types of requests. To overcome this we make scsi_transfer_length() use the scatterlist length in the scsi_data_buffer as basis for the wire transfer calculation instead of __data_len. Reported-by: Christoph Hellwig <hch@infradead.org> Debugged-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Fixes: d77e65350f2d82dfa0557707d505711f5a43c8fd Cc: stable@vger.kernel.org Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-06-30usb-storage/SCSI: Add broken_fua blacklist flagAlan Stern
Some buggy JMicron USB-ATA bridges don't know how to translate the FUA bit in READs or WRITEs. This patch adds an entry in unusual_devs.h and a blacklist flag to tell the sd driver not to use FUA. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Michael Büsch <m@bues.ch> Tested-by: Michael Büsch <m@bues.ch> Acked-by: James Bottomley <James.Bottomley@HansenPartnership.com> CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-12Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "The highlights this round include: - Add support for T10 PI pass-through between vhost-scsi + virtio-scsi (MST + Paolo + MKP + nab) - Add support for T10 PI in qla2xxx target mode (Quinn + MKP + hch + nab, merged through scsi.git) - Add support for percpu-ida pre-allocation in qla2xxx target code (Quinn + nab) - A number of iser-target fixes related to hardening the network portal shutdown path (Sagi + Slava) - Fix response length residual handling for a number of control CDBs (Roland + Christophe V.) - Various iscsi RFC conformance fixes in the CHAP authentication path (Tejas and Calsoft folks + nab) - Return TASK_SET_FULL status for tcm_fc(FCoE) DataIn + Response failures (Vasu + Jun + nab) - Fix long-standing ABORT_TASK + session reset hang (nab) - Convert iser-initiator + iser-target to include T10 bytes into EDTL (Sagi + Or + MKP + Mike Christie) - Fix NULL pointer dereference regression related to XCOPY introduced in v3.15 + CC'ed to v3.12.y (nab)" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (34 commits) target: Fix NULL pointer dereference for XCOPY in target_put_sess_cmd vhost-scsi: Include prot_bytes into expected data transfer length TARGET/sbc,loopback: Adjust command data length in case pi exists on the wire libiscsi, iser: Adjust data_length to include protection information scsi_cmnd: Introduce scsi_transfer_length helper target: Report correct response length for some commands target/sbc: Check that the LBA and number of blocks are correct in VERIFY target/sbc: Remove sbc_check_valid_sectors() Target/iscsi: Fix sendtargets response pdu for iser transport Target/iser: Fix a wrong dereference in case discovery session is over iser iscsi-target: Fix ABORT_TASK + connection reset iscsi_queue_req memory leak target: Use complete_all for se_cmd->t_transport_stop_comp target: Set CMD_T_ACTIVE bit for Task Management Requests target: cleanup some boolean tests target/spc: Simplify INQUIRY EVPD=0x80 tcm_fc: Generate TASK_SET_FULL status for response failures tcm_fc: Generate TASK_SET_FULL status for DataIN failures iscsi-target: Reject mutual authentication with reflected CHAP_C iscsi-target: Remove no-op from iscsit_tpg_del_portal_group iscsi-target: Fix CHAP_A parameter list handling ...
2014-06-11scsi_cmnd: Introduce scsi_transfer_length helperSagi Grimberg
In case protection information exists on the wire scsi transports should include it in the transfer byte count (even if protection information does not exist in the host memory space). This helper will compute the total transfer length from the scsi command data length and protection attributes. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Cc: stable@vger.kernel.org # 3.15+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-06-09Merge remote-tracking branch 'scsi-queue/drivers-for-3.16' into for-linusJames Bottomley
2014-06-02include/scsi/osd_protocol.h: remove unnecessary __constantFabian Frederick
__constant_cpu_to_be16 converted to cpu_to_be16 This patch fixes checkpatch warnings: "WARNING: __constant_cpu_to_be16 should be cpu_to_be16" Signed-off-by: Fabian Frederick <fabf@skynet.be> Ack-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19virtio_scsi: use cmd_sizeChristoph Hellwig
Taken almost entirely from Nicholas Bellinger's scsi-mq conversion. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-05-19scsi: reintroduce scsi_driver.init_commandChristoph Hellwig
Instead of letting the ULD play games with the prep_fn move back to the model of a central prep_fn with a callback to the ULD. This already cleans up and shortens the code by itself, and will be required to properly support blk-mq in the SCSI midlayer. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Nicholas Bellinger <nab@linux-iscsi.org> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-04-09scsi: Make sure cmd_flags are 64-bitMartin K. Petersen
cmd_flags in struct request is now 64 bits wide but the scsi_execute functions truncated arguments passed to int leading to errors. Make sure the flags parameters are u64. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Cc: Jens Axboe <axboe@fb.com> CC: Jan Kara <jack@suse.cz> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-03Merge tag 'rdma-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband updates from Roland Dreier: "Main batch of InfiniBand/RDMA changes for 3.15: - The biggest change is core API extensions and mlx5 low-level driver support for handling DIF/DIX-style protection information, and the addition of PI support to the iSER initiator. Target support will be arriving shortly through the SCSI target tree. - A nice simplification to the "umem" memory pinning library now that we have chained sg lists. Kudos to Yishai Hadas for realizing our code didn't have to be so crazy. - Another nice simplification to the sg wrappers used by qib, ipath and ehca to handle their mapping of memory to adapter. - The usual batch of fixes to bugs found by static checkers etc. from intrepid people like Dan Carpenter and Yann Droneaud. - A large batch of cxgb4, ocrdma, qib driver updates" * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (102 commits) RDMA/ocrdma: Unregister inet notifier when unloading ocrdma RDMA/ocrdma: Fix warnings about pointer <-> integer casts RDMA/ocrdma: Code clean-up RDMA/ocrdma: Display FW version RDMA/ocrdma: Query controller information RDMA/ocrdma: Support non-embedded mailbox commands RDMA/ocrdma: Handle CQ overrun error RDMA/ocrdma: Display proper value for max_mw RDMA/ocrdma: Use non-zero tag in SRQ posting RDMA/ocrdma: Memory leak fix in ocrdma_dereg_mr() RDMA/ocrdma: Increment abi version count RDMA/ocrdma: Update version string be2net: Add abi version between be2net and ocrdma RDMA/ocrdma: ABI versioning between ocrdma and be2net RDMA/ocrdma: Allow DPP QP creation RDMA/ocrdma: Read ASIC_ID register to select asic_gen RDMA/ocrdma: SQ and RQ doorbell offset clean up RDMA/ocrdma: EQ full catastrophe avoidance RDMA/cxgb4: Disable DSGL use by default RDMA/cxgb4: rx_data() needs to hold the ep mutex ...
2014-04-03Merge branches 'core', 'cxgb4', 'ip-roce', 'iser', 'misc', 'mlx4', 'nes', ↵Roland Dreier
'ocrdma', 'qib', 'sgwrapper', 'srp' and 'usnic' into for-next
2014-04-01Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull first round of SCSI updates from James Bottomley: "This patch consists of the usual driver updates (megaraid_sas, scsi_debug, qla2xxx, qla4xxx, lpfc, bnx2fc, be2iscsi, hpsa, ipr) plus an assortment of minor fixes and the first precursors of SCSI-MQ (the code path simplifications) and the bug fix for the USB oops on remove (which involves an infrastructure change, so is sent via the main tree with a delayed backport after a cycle in which it is shown to introduce no new bugs)" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (196 commits) [SCSI] sd: Quiesce mode sense error messages [SCSI] add support for per-host cmd pools [SCSI] simplify command allocation and freeing a bit [SCSI] megaraid: simplify internal command handling [SCSI] ses: Use vpd information from scsi_device [SCSI] Add EVPD page 0x83 and 0x80 to sysfs [SCSI] Return VPD page length in scsi_vpd_inquiry() [SCSI] scsi_sysfs: Implement 'is_visible' callback [SCSI] hpsa: update driver version to 3.4.4-1 [SCSI] hpsa: fix bad endif placement in RAID 5 mapper code [SCSI] qla2xxx: Fix build errors related to invalid print fields on some architectures. [SCSI] bfa: Replace large udelay() with mdelay() [SCSI] vmw_pvscsi: Some improvements in pvscsi driver. [SCSI] vmw_pvscsi: Add support for I/O requests coalescing. [SCSI] vmw_pvscsi: Fix pvscsi_abort() function. [SCSI] remove deprecated IRQF_DISABLED from SCSI [SCSI] bfa: Updating Maintainers email ids [SCSI] ipr: Add new CCIN definition for Grand Canyon support [SCSI] ipr: Format HCAM overlay ID 0x21 [SCSI] ipr: Use pci_enable_msi_range() and pci_enable_msix_range() ...
2014-03-27[SCSI] add support for per-host cmd poolsChristoph Hellwig
This allows drivers to specify the size of their per-command private data in the host template and then get extra memory allocated for each command instead of needing another allocation in ->queuecommand. With the current SCSI code that already does multiple allocations for each command this probably doesn't make a big performance impact, but it allows to clean up the drivers, and prepare them for using the blk-mq infrastructure where the common allocation will make a difference. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-27[SCSI] megaraid: simplify internal command handlingChristoph Hellwig
We don't use the passed in scsi command for anything, so just add a adapter- wide internal status to go along with the internal scb that is used unter int_mtx to pass back the return value and get rid of all the complexities and abuse of the scsi_cmnd structure. This gets rid of the only user of scsi_allocate_command/scsi_free_command, which can now be removed. [jejb: checkpatch fixes] Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-27[SCSI] Add EVPD page 0x83 and 0x80 to sysfsHannes Reinecke
EVPD page 0x83 is used to uniquely identify the device. So instead of having each and every program issue a separate SG_IO call to retrieve this information it does make far more sense to display it in sysfs. Some older devices (most notably tapes) will only report reliable information in page 0x80 (Unit Serial Number). So export this in the sysfs attribute 'vpd_pg80'. [jejb: checkpatch fix] [hare: attach after transport configure] [fengguang.wu@intel.com: spotted problems with the original now fixed] Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-24scsi_transport_srp: Fix two kernel-doc warningsBart Van Assche
This patch fixes the following two kernel-doc warnings: Warning(drivers/scsi/scsi_transport_srp.c:819): No description found for parameter 'rport' Warning(include/scsi/scsi_transport_srp.h:75): Excess struct/union/enum/typedef member 'deleted' description in 'srp_rport' Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reported-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Sebastian Riemer <sebastian.riemer@profitbricks.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-03-18libata, libsas: kill pm_result and related cleanupDan Williams
Tejun says: "At least for libata, worrying about suspend/resume failures don't make whole lot of sense. If suspend failed, just proceed with suspend. If the device can't be woken up afterwards, that's that. There isn't anything we could have done differently anyway. The same for resume, if spinup fails, the device is dud and the following commands will invoke EH actions and will eventually fail. Again, there really isn't any *choice* to make. Just making sure the errors are handled gracefully (ie. don't crash) and the following commands are handled correctly should be enough." The only libata user that actually cares about the result from a suspend operation is libsas. However, it only cares about whether queuing a new operation collides with an in-flight one. All libsas does with the error is retry, but we can just let libata wait for the previous operation before continuing. Other cleanups include: 1/ Unifying all ata port pm operations on an ata_port_pm_ prefix 2/ Marking all ata port pm helper routines as returning void, only ata_port_pm_ entry points need to fake a 0 return value. 3/ Killing ata_port_{suspend|resume}_common() in favor of calling ata_port_request_pm() directly 4/ Killing the wrappers that just do a to_ata_port() conversion 5/ Clearly marking the entry points that do async operations with an _async suffix. Reference: http://marc.info/?l=linux-scsi&m=138995409532286&w=2 Cc: Phillip Susi <psusi@ubuntu.com> Cc: Alan Stern <stern@rowland.harvard.edu> Suggested-by: Tejun Heo <tj@kernel.org> Signed-off-by: Todd Brandt <todd.e.brandt@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-03-17SCSI/libiscsi: Add check_protection callback for transportsSagi Grimberg
iSCSI needs to be at least aware that a task involves protection information. In case it does, after the transaction completed libiscsi will ask the transport to check the protection status of the transaction. Unlike transport errors, DIF errors should not prevent successful completion of the transaction from the transport point of view, but should be escelated to scsi mid-layer when constructing the scsi result and sense data. check_protection routine will return the ascq corresponding to the DIF error that occured (or 0 if no error happened). return ascq: - 0x1: GUARD_CHECK_FAILED - 0x2: APPTAG_CHECK_FAILED - 0x3: REFTAG_CHECK_FAILED Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Alex Tabachnik <alext@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-03-15[SCSI] do not manipulate device reference counts in scsi_get/put_commandChristoph Hellwig
Many callers won't need this and we can optimize them away. In addition the handling in the __-prefixed variants was inconsistant to start with. Based on an earlier patch from Bart Van Assche. [jejb: fix kerneldoc probelm picked up by Fengguang Wu] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] libiscsi: Reduce locking contention in fast pathShlomo Pongratz
Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] fix our current target reap infrastructureJames Bottomley
This patch eliminates the reap_ref and replaces it with a proper kref. On last put of this kref, the target is removed from visibility in sysfs. The final call to scsi_target_reap() for the device is done from __scsi_remove_device() and only if the device was made visible. This ensures that the target disappears as soon as the last device is gone rather than waiting until final release of the device (which is often too long). Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@vger.kernel.org # delay backport by 2 months for field testing Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] libsas: introduce scmd_dbg() to quiet false positive "timeout" messagesDan Williams
libsas sometimes short circuits timeouts to force commands into error recovery. It is misleading to log that the command timed-out in sas_scsi_timed_out() when in fact it was just queued for error handling. It's also redundant in the case of a true timeout as libata eh will detect and report timeouts via it's AC_ERR_TIMEOUT facility. Given that some environments consider "timeout" errors to be indicative of impending device failure demote the sas_scsi_timed_out() timeout message to be disabled by default. This parallels ata_scsi_timed_out(). [jejb: checkpatch fix] Reported-by: Xun Ni <xun.ni@intel.com> Tested-by: Nelson Cheng <nelson.cheng@intel.com> Acked-by: Lukasz Dorau <lukasz.dorau@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] scsi_transport_fc: Add 32Gbps speed definition.Chad Dupuis
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-01-31Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "The highlights this round include: - add support for SCSI Referrals (Hannes) - add support for T10 DIF into target core (nab + mkp) - add support for T10 DIF emulation in FILEIO + RAMDISK backends (Sagi + nab) - add support for T10 DIF -> bio_integrity passthrough in IBLOCK backend (nab) - prep changes to iser-target for >= v3.15 T10 DIF support (Sagi) - add support for qla2xxx N_Port ID Virtualization - NPIV (Saurav + Quinn) - allow percpu_ida_alloc() to receive task state bitmask (Kent) - fix >= v3.12 iscsi-target session reset hung task regression (nab) - fix >= v3.13 percpu_ref se_lun->lun_ref_active race (nab) - fix a long-standing network portal creation race (Andy)" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (51 commits) target: Fix percpu_ref_put race in transport_lun_remove_cmd target/iscsi: Fix network portal creation race target: Report bad sector in sense data for DIF errors iscsi-target: Convert gfp_t parameter to task state bitmask iscsi-target: Fix connection reset hang with percpu_ida_alloc percpu_ida: Make percpu_ida_alloc + callers accept task state bitmask iscsi-target: Pre-allocate more tags to avoid ack starvation qla2xxx: Configure NPIV fc_vport via tcm_qla2xxx_npiv_make_lport qla2xxx: Enhancements to enable NPIV support for QLOGIC ISPs with TCM/LIO. qla2xxx: Fix scsi_host leak on qlt_lport_register callback failure IB/isert: pass scatterlist instead of cmd to fast_reg_mr routine IB/isert: Move fastreg descriptor creation to a function IB/isert: Avoid frwr notation, user fastreg IB/isert: seperate connection protection domains and dma MRs tcm_loop: Enable DIF/DIX modes in SCSI host LLD target/rd: Add DIF protection into rd_execute_rw target/rd: Add support for protection SGL setup + release target/rd: Refactor rd_build_device_space + rd_release_device_space target/file: Add DIF protection support to fd_execute_rw target/file: Add DIF protection init/format support ...
2014-01-28Merge branch 'for-linus' of git://git.open-osd.org/linux-open-osdLinus Torvalds
Pull exofs and ore fixes from Boaz Harrosh: "The main fix here, the first patch, is also destined for -stable. The rest is small trivia and cosmetics. The ORE patches effect both exofs and pnfs-objects very reproducible bugs" [ ORE is "object raid engine", used by exofs and pnfs - Linus ] * 'for-linus' of git://git.open-osd.org/linux-open-osd: exofs: Print less in r4w exofs: Allow corrupted directory entry to be empty file exofs: Allow O_DIRECT open ore: Don't crash on NULL bio in _clear_bio ore: Fix wrong math in allocation of per device BIO
2014-01-24Merge tag 'rdma-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband updates from Roland Dreier: "Main batch of InfiniBand/RDMA changes for 3.14: - Flow steering for InfiniBand UD traffic - IP-based addressing for IBoE aka RoCE - Pass SRP submaintainership from Dave to Bart - SRP transport fixes from Bart - Add the new Cisco usNIC low-level device driver - Various other fixes" * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (75 commits) IB/mlx5: Verify reserved fields are cleared IB/mlx5: Remove old field for create mkey mailbox IB/mlx5: Abort driver cleanup if teardown hca fails IB/mlx5: Allow creation of QPs with zero-length work queues mlx5_core: Fix PowerPC support mlx5_core: Improve debugfs readability IB/mlx5: Add support for resize CQ IB/mlx5: Implement modify CQ IB/mlx5: Make sure doorbell record is visible before doorbell mlx5_core: Use mlx5 core style warning IB/mlx5: Clear out struct before create QP command mlx5_core: Fix out arg size in access_register command RDMA/nes: Slight optimization of Ethernet address compare IB/qib: Fix QP check when looping back to/from QP1 RDMA/cxgb4: Fix gcc warning on 32-bit arch IB/usnic: Remove unused includes of <linux/version.h> RDMA/amso1100: Add check if cache memory was allocated before freeing it IPoIB: Report operstate consistently when brought up without a link IB/core: Fix unused variable warning RDMA/cma: Handle global/non-linklocal IPv6 addresses in cma_check_linklocal() ...
2014-01-23ore: Fix wrong math in allocation of per device BIOBoaz Harrosh
At IO preparation we calculate the max pages at each device and allocate a BIO per device of that size. The calculation was wrong on some unaligned corner cases offset/length combination and would make prepare return with -ENOMEM. This would be bad for pnfs-objects that would in that case IO through MDS. And fatal for exofs were it would fail writes with EIO. Fix it by doing the proper math, that will work in all cases. (I ran a test with all possible offset/length combinations this time round). Also when reading we do not need to allocate for the parity units since we jump over them. Also lower the max_io_length to take into account the parity pages so not to allocate BIOs bigger than PAGE_SIZE CC: Stable Kernel <stable@vger.kernel.org> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2014-01-21scsi_transport_srp: Fix kernel-doc warningsBart Van Assche
The following command has been used to verify that the kernel-doc tool no longer complains about undocumented fields: scripts/kernel-doc -html drivers/scsi/scsi_transport_srp.c \ include/scsi/scsi_transport_srp.h >srp-transport-doc.html Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Sebastian Riemer <sebastian.riemer@profitbricks.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-21scsi_transport_srp: Fix a race conditionBart Van Assche
The rport timers must be stopped before the SRP initiator destroys the resources associated with the SCSI host. This is necessary because otherwise the callback functions invoked from the SRP transport layer could trigger a use-after-free. Stopping the rport timers before invoking scsi_remove_host() can trigger long delays in the SCSI error handler if a transport layer failure occurs while scsi_remove_host() is in progress. Hence move the code for stopping the rport timers from srp_rport_release() into a new function and invoke that function after scsi_remove_host() has finished. This patch fixes the following sporadic kernel crash: kernel BUG at include/asm-generic/dma-mapping-common.h:64! invalid opcode: 0000 [#1] SMP RIP: 0010:[<ffffffffa03b20b1>] [<ffffffffa03b20b1>] srp_unmap_data+0x121/0x130 [ib_srp] Call Trace: [<ffffffffa03b20fc>] srp_free_req+0x3c/0x80 [ib_srp] [<ffffffffa03b2188>] srp_finish_req+0x48/0x70 [ib_srp] [<ffffffffa03b21fb>] srp_terminate_io+0x4b/0x60 [ib_srp] [<ffffffffa03a6fb5>] __rport_fail_io_fast+0x75/0x80 [scsi_transport_srp] [<ffffffffa03a7438>] rport_fast_io_fail_timedout+0x88/0xc0 [scsi_transport_srp] [<ffffffff8108b370>] worker_thread+0x170/0x2a0 [<ffffffff81090876>] kthread+0x96/0xa0 [<ffffffff8100c0ca>] child_rip+0xa/0x20 Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-09target_core_alua: Referrals infrastructureHannes Reinecke
Add infrastructure for referrals. v2 changes: - Fix unsigned long long division in core_alua_state_lba_dependent on 32-bit (Fengguang + Chen + Hannes) - Fix compile warning in core_alua_state_lba_dependent (nab) - Convert segment_* + sectors variables in core_alua_state_lba_dependent to u64 (Hannes) Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-12-19[SCSI] libiscsi: Add local_ipaddr parameter in iscsi_conn structAdheer Chandravanshi
Add local_ipaddr param and support get/set operations on it. Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-12-19[SCSI] scsi_transport_iscsi: Export ISCSI_PARAM_LOCAL_IPADDR attr for ↵Adheer Chandravanshi
iscsi_connection This attribute specifies the local IP address used to establish connection. Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-12-19[SCSI] scsi_transport_iscsi: Add host statistics supportLalit Chandivade
Add transport_iscsi hooks to get aggregate host statistics. The statistics include MAC, TCP/IP & iSCSI statistics. Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-12-19[SCSI] improved eh timeout handlerHannes Reinecke
When a command runs into a timeout we need to send an 'ABORT TASK' TMF. This is typically done by the 'eh_abort_handler' LLDD callback. Conceptually, however, this function is a normal SCSI command, so there is no need to enter the error handler. This patch implements a new scsi_abort_command() function which invokes an asynchronous function scsi_eh_abort_handler() to abort the commands via the usual 'eh_abort_handler'. If abort succeeds the command is either retried or terminated, depending on the number of allowed retries. However, 'eh_eflags' records the abort, so if the retry would fail again the command is pushed onto the error handler without trying to abort it (again); it'll be cleared up from SCSI EH. [hare: smatch detected stray switch fixed] Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-12-19[SCSI] Fix erratic device offline during EHJames Bottomley
Commit 18a4d0a22ed6c54b67af7718c305cd010f09ddf8 (Handle disk devices which can not process medium access commands) was introduced to offline any device which cannot process medium access commands. However, commit 3eef6257de48ff84a5d98ca533685df8a3beaeb8 (Reduce error recovery time by reducing use of TURs) reduced the number of TURs by sending it only on the first failing command, which might or might not be a medium access command. So in combination this results in an erratic device offlining during EH; if the command where the TUR was sent upon happens to be a medium access command the device will be set offline, if not everything proceeds as normal. This patch moves the check to the final test, eliminating this problem. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-12-16[SCSI] iscsi_transport: Additional parameters for network settingsHarish Zunjarrao
Added support to display and update additional network parameters through iscsiadm. Signed-off-by: Harish Zunjarrao <harish.zunjarrao@qlogic.com> Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-12-16[SCSI] iscsi_transport: Remove net param enum valuesHarish Zunjarrao
Remove explicit values assignment for net param enums. Signed-off-by: Harish Zunjarrao <harish.zunjarrao@qlogic.com> Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-11-29[SCSI] Disable WRITE SAME for RAID and virtual host adapter driversMartin K. Petersen
Some host adapters do not pass commands through to the target disk directly. Instead they provide an emulated target which may or may not accurately report its capabilities. In some cases the physical device characteristics are reported even when the host adapter is processing commands on the device's behalf. This can lead to adapter firmware hangs or excessive I/O errors. This patch disables WRITE SAME for devices connected to host adapters that provide an emulated target. Driver writers can disable WRITE SAME by setting the no_write_same flag in the host adapter template. [jejb: fix up rejections due to eh_deadline patch] Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Cc: stable@kernel.org Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-11-18Merge tag 'rdma-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband/rdma updates from Roland Dreier: - Re-enable flow steering verbs with new improved userspace ABI - Fixes for slow connection due to GID lookup scalability - IPoIB fixes - Many fixes to HW drivers including mlx4, mlx5, ocrdma and qib - Further improvements to SRP error handling - Add new transport type for Cisco usNIC * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (66 commits) IB/core: Re-enable create_flow/destroy_flow uverbs IB/core: extended command: an improved infrastructure for uverbs commands IB/core: Remove ib_uverbs_flow_spec structure from userspace IB/core: Use a common header for uverbs flow_specs IB/core: Make uverbs flow structure use names like verbs ones IB/core: Rename 'flow' structs to match other uverbs structs IB/core: clarify overflow/underflow checks on ib_create/destroy_flow IB/ucma: Convert use of typedef ctl_table to struct ctl_table IB/cm: Convert to using idr_alloc_cyclic() IB/mlx5: Fix page shift in create CQ for userspace IB/mlx4: Fix device max capabilities check IB/mlx5: Fix list_del of empty list IB/mlx5: Remove dead code IB/core: Encorce MR access rights rules on kernel consumers IB/mlx4: Fix endless loop in resize CQ RDMA/cma: Remove unused argument and minor dead code RDMA/ucma: Discard events for IDs not yet claimed by user space IB/core: Add Cisco usNIC rdma node and transport types RDMA/nes: Remove self-assignment from nes_query_qp() IB/srp: Report receive errors correctly ...
2013-11-10Merge tag 'fcoe-3.13' into for-linusJames Bottomley
Pull Request for 3.13 for FCOE tree. Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-11-08scsi_transport_srp: Add periodic reconnect supportBart Van Assche
Add support for periodically reconnecting to an SRP target until the dev_loss timer expires. After the tenth reconnection attempt, gradually slow down subsequent reconnect attempts. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: David Dillow <dillowda@ornl.gov> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-11-08scsi_transport_srp: Add transport layer error handlingBart Van Assche
Add the necessary functions in the SRP transport module to allow an SRP initiator driver to implement transport layer error handling similar to the functionality already provided by the FC transport layer. This includes: - Support for implementing fast_io_fail_tmo, the time that should elapse after having detected a transport layer problem and before failing I/O. - Support for implementing dev_loss_tmo, the time that should elapse after having detected a transport layer problem and before removing a remote port. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: David Dillow <dillowda@ornl.gov> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-11-08IB/srp: Keep rport as long as the IB transport layerBart Van Assche
Keep the rport data structure around after srp_remove_host() has finished until cleanup of the IB transport layer has finished completely. This is necessary because later patches use the rport pointer inside the queuecommand callback. Without this patch accessing the rport from inside a queuecommand callback is racy because srp_remove_host() must be invoked before scsi_remove_host() and because the queuecommand callback could get invoked after srp_remove_host() has finished. In other words, without this patch the queuecommand callback can get invoked after the rport data structure has been freed. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: David Dillow <dillowda@ornl.gov> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-10-25[SCSI] Add 'eh_deadline' to limit SCSI EH runtimeHannes Reinecke
This patchs adds an 'eh_deadline' sysfs attribute to the scsi host which limits the overall runtime of the SCSI EH. The 'eh_deadline' value is stored in the now obsolete field 'resetting'. When a command is failed the start time of the EH is stored in 'last_reset'. If the overall runtime of the SCSI EH is longer than last_reset + eh_deadline, the EH is short-circuited and falls through to issue a host reset only. [jejb: add comments in Scsi_Host about new fields] Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] remove check for 'resetting'Hannes Reinecke
Field is now unused, so this is dead code. [jejb: remove resetting and last_reset from Scsi_Host] Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] scsi_transport_iscsi: Add support to set CHAP entriesAdheer Chandravanshi
For offload iSCSI like qla4xxx, CHAP entries are stored in adapter's flash. This patch adds support to add/update CHAP entries in adapter's flash using iscsi tools, like Open-iSCSI. Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-11libfcoe: Make fcoe_sysfs optional / fix fnic NULL exceptionRobert Love
fnic doesn't use any of the create/destroy/enable/disable interfaces either from the (legacy) module paramaters or the (new) fcoe_sysfs interfaces. When fcoe_sysfs was introduced fnic wasn't changed since it wasn't using the interfaces. libfcoe incorrectly assumed that that all of its users were using fcoe_sysfs and when adding and deleting FCFs would assume the existance of a fcoe_ctlr_device. fnic was not allocating this structure because it doesn't care about the standard user interfaces (fnic starts on link only). If/When libfcoe tried to use the fcoe_ctlr_device's lock for the first time a NULL pointer exception would be triggered. Since fnic doesn't care about sysfs or user interfaces, the solution is to drop libfcoe's assumption that all drivers are using fcoe_sysfs. This patch accomplishes this by changing some of the structure relationships. We need a way to determine when a LLD is using fcoe_sysfs or not and we can do that by checking for the existance of the fcoe_ctlr_device. Prior to this patch, it was assumed that the fcoe_ctlr structure was allocated with the fcoe_ctlr_device and immediately followed it in memory. To reach the fcoe_ctlr_device we would simply go back in memory from the fcoe_ctlr to get the fcoe_ctlr_device. Since fnic doesn't allocate the fcoe_ctlr_device, we cannot keep that assumption. This patch adds a pointer from the fcoe_ctlr to the fcoe_ctlr_device. For bnx2fc and fcoe we will continue to allocate the two structures together, but then we'll set the ctlr->cdev pointer to point at the fcoe_ctlr_device. fnic will not change and will continue to allocate the fcoe_ctlr itself, and ctlr->cdev will remain NULL. When libfcoe adds fcoe_fcf's to the fcoe_ctlr it will check if ctlr->cdev is set and only if so will it continue to interact with fcoe_sysfs. Signed-off-by: Robert Love <robert.w.love@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Tested-by: Hiral Patel <hiralpat@cisco.com>
2013-09-12Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "Lots of activity again this round for I/O performance optimizations (per-cpu IDA pre-allocation for vhost + iscsi/target), and the addition of new fabric independent features to target-core (COMPARE_AND_WRITE + EXTENDED_COPY). The main highlights include: - Support for iscsi-target login multiplexing across individual network portals - Generic Per-cpu IDA logic (kent + akpm + clameter) - Conversion of vhost to use per-cpu IDA pre-allocation for descriptors, SGLs and userspace page pointer list - Conversion of iscsi-target + iser-target to use per-cpu IDA pre-allocation for descriptors - Add support for generic COMPARE_AND_WRITE (AtomicTestandSet) emulation for virtual backend drivers - Add support for generic EXTENDED_COPY (CopyOffload) emulation for virtual backend drivers. - Add support for fast memory registration mode to iser-target (Vu) The patches to add COMPARE_AND_WRITE and EXTENDED_COPY support are of particular significance, which make us the first and only open source target to support the full set of VAAI primitives. Currently Linux clients are lacking upstream support to actually utilize these primitives. However, with server side support now in place for folks like MKP + ZAB working on the client, this logic once reserved for the highest end of storage arrays, can now be run in VMs on their laptops" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (50 commits) target/iscsi: Bump versions to v4.1.0 target: Update copyright ownership/year information to 2013 iscsi-target: Bump default TCP listen backlog to 256 target: Fix >= v3.9+ regression in PR APTPL + ALUA metadata write-out iscsi-target; Bump default CmdSN Depth to 64 iscsi-target: Remove unnecessary wait_for_completion in iscsi_get_thread_set iscsi-target: Add thread_set->ts_activate_sem + use common deallocate iscsi-target: Fix race with thread_pre_handler flush_signals + ISCSI_THREAD_SET_DIE target: remove unused including <linux/version.h> iser-target: introduce fast memory registration mode (FRWR) iser-target: generalize rdma memory registration and cleanup iser-target: move rdma wr processing to a shared function target: Enable global EXTENDED_COPY setup/release target: Add Third Party Copy (3PC) bit in INQUIRY response target: Enable EXTENDED_COPY setup in spc_parse_cdb target: Add support for EXTENDED_COPY copy offload emulation target: Avoid non-existent tg_pt_gp_mem in target_alua_state_check target: Add global device list for EXTENDED_COPY target: Make helpers non static for EXTENDED_COPY command setup target: Make spc_parse_naa_6h_vendor_specific non static ...
2013-09-09scsi: Add CDB definition for COMPARE_AND_WRITENicholas Bellinger
Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>