summaryrefslogtreecommitdiffstats
path: root/include/sound
AgeCommit message (Collapse)Author
2012-05-22Merge tag 'asoc-3.5' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Last minute updates These are all new code, they've been in -next already so should be OK for merge this time round. I'd been planning to send a pull request today after they'd had a bit of exposure there to make sure breakage didn't propagate into your tree.
2012-05-21Merge branch 'topic/misc' into for-linusTakashi Iwai
2012-05-19ASoC: sh: fsi: enable chip specific data transfer modeKuninori Morimoto
SupherH FSI2 can use special data transfer, but it depends on CPU-FSI2 connection style. We can use 16bit data stream mode if it was valid connection, and it is required for 16bit data DMA transfer / SPDIF sound output. We can use 24bit data transfer if it was invalid connection. We can select connection type if CPU is SH7372, and it is always valid connection if latest SuperH. This patch adds new bus_option and fsi_bus_setup() for supporting these feature. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-13ASoC: max98095: Single bit bitfields should be unsignedMark Brown
There's no space for the sign bit. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-02ASoC: core: Allow DAIs to specify a base addressMark Brown
Devices with many DAIs are becoming more and more common, and generally the more modern devices have consistent register layouts between DAIs. Rather than have drivers open code lookups based on the DAI ID or cause uglification in UI by having register addresses for IDs provide a base address field they can use. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-04-30ASoC: Add support for CS42L52 CodecBrian Austin
This patch adds support for Cirrus Logic CS42L52 Low Power Stereo Codec Signed-off-by: Brian Austin <brian.austin@cirrus.com> Signed-off-by: Georgi Vlaev <joe@nucleusys.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-26ASoC: dpcm: Add bespoke trigger()Liam Girdwood
Some on SoC DSP HW is very tightly coupled with DMA and DAI drivers. It's necessary to allow some flexability wrt to PCM operations here so that we can define a bespoke DPCM trigger() PCM operation for such HW. A bespoke DPCM trigger() allows exact ordering and timing of component triggering by allowing a component driver to manage the final enable and disable configurations without adding extra complexity to other component drivers. e.g. The McPDM DAI and ABE are tightly coupled on OMAP4 so we have a bespoke trigger to manage the trigger to improve performance and reduce complexity when triggering new McPDM BEs. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-26ASoC: dpcm: Add API for DAI link substream and runtime lookupLiam Girdwood
Some component drivers will need to be able to look up their DAI link substream and RTD data. Provide a mechanism for this. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-26ASoC: dpcm: Add runtime dynamic route updateLiam Girdwood
This patch allows DPCM to dynamically alter the FE to BE PCM links at runtime based on mixer setting updates. DAPM is looked up after every mixer update and we perform a DPCM runtime update if the mixer has a change of value. This patchs adds/changes the following :- o Adds DPCM runtime update core. o Changes soc_dapm_mixer_update_power() and soc_dapm_mux_update_power() to return if a change has occured rather than 0. No other users check atm. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-26ASoC: dpcm: Add debugFS support for DPCMLiam Girdwood
Add debugFS files for DPCM link management information. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-26ASoC: dpcm: Add Dynamic PCM core operations.Liam Girdwood
The Dynamic PCM core allows digital audio data to be dynamically routed between different ALSA PCMs and DAI links on SoC CPUs with on chip DSP devices. e.g. audio data could be played on pcm:0,0 and routed to any (or all) SoC DAI links. Dynamic PCM introduces the concept of Front End (FE) PCMs and Back End (BE) PCMs. The FE PCMs are normal ALSA PCM devices except that they can dynamically route digital audio data to any supported BE PCM. A BE PCM has no ALSA device, but represents a DAI link and it's substream and audio HW parameters. e.g. pcm:0,0 routing digital data to 2 external codecs. FE pcm:0,0 ----> BE (McBSP.0) ----> CODEC 0 +--> BE (McPDM.0) ----> CODEC 1 e.g. pcm:0,0 and pcm:0,1 routing digital data to 1 external codec. FE pcm:0,0 --- +--> BE (McBSP.0) ----> CODEC FE pcm:0,1 --- The digital audio routing is controlled by the usual ALSA method of mixer kcontrols. Dynamic PCM uses a DAPM graph to work out the routing based upon the mixer settings and configures the BE PCMs based on routing and the FE HW params. DPCM is designed so that most ASoC component drivers will need no modification at all. It's intended that existing CODEC, DAI and platform drivers can be used in DPCM based audio devices without any changes. However, there will be some cases where minor changes are required (e.g. for very tightly coupled HW) and there are helpers to support this too. Somethimes the HW params of a FE and BE do not match or are incompatible, so in these cases the machine driver can reconfigure any hw_params and make any DSP perform sample rate / format conversion. This patch adds the core DPCM code and contains :- o The FE and BE PCM operations. o FE and BE DAI link support. o FE and BE PCM creation. o BE support API. o BE and FE link management. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-23ASoC: core: Add strobe controlKristoffer KARLSSON
Added support for a control that strobes a bit in a register to high then back to low (or the inverse). This is typically useful for hardware that requires strobing a singe bit to trigger some functionality and where exposing the bit in a normal single control would require the user to first manually set then again unset the bit again for the strobe to trigger. Added convenience macro. SOC_SINGLE_STROBE Added accessor implementations. snd_soc_get_strobe snd_soc_put_strobe Signed-off-by: Kristoffer KARLSSON <kristoffer.karlsson@stericsson.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-23ASoC: core: Add signed multi register controlKristoffer KARLSSON
Added control type that can span multiple consecutive codec registers forming a single signed value in a MSB/LSB manner. The control dynamically adjusts to the register word size configured in driver. Added convenience macro. SOC_SINGLE_XR_SX Added accessor implementations. snd_soc_info_xr_sx snd_soc_get_xr_sx snd_soc_put_xr_sx Signed-off-by: Kristoffer KARLSSON <kristoffer.karlsson@stericsson.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-18ASoC: dapm: Add API call to query valid DAPM pathsLiam Girdwood
In preparation for ASoC DSP support. Add a DAPM API call to determine whether a DAPM audio path is valid between source and sink widgets. This also takes into account all kcontrol mux and mixer settings in between the source and sink widgets to validate the audio path. This will be used by the DSP core to determine the runtime DAI mappings between FE and BE DAIs in order to run PCM operations. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-18ALSA: Add definitions for CEA-861 Audio InfoFramesRicardo Neri
Along with the IEC-60958 channel status word, CEA-861 Audio InfoFrames are used in HDMI and DisplayPort to describe the parameters of the audio stream. Hence, drivers for such devices may use these definitions to, for instance, fill a CEA-861 data structure and pass it to a display driver to configure an IP. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-16ASoC: Merge tag 'v3.4-rc3' into for-3.5Mark Brown
Linux 3.4-rc3 contains a bunch of Tegra changes which are conflicting annoyingly with the new development that's going on for Tegra so merge it up to resolve those conflicts. Conflicts: sound/soc/soc-core.c sound/soc/tegra/tegra_i2s.c sound/soc/tegra/tegra_spdif.c
2012-04-16ASoC: core: Support transparent CODEC<->CODEC DAI linksMark Brown
Rather than having the user half start a stream but avoid any DMA to trigger data flow on links which don't pass through the CPU create a DAPM route between the two DAI widgets using a hw_params configuration provided by the machine driver with the new 'params' member of the dai_link struct. If no configuration is provided in the dai_link then use the old style even for CODEC<->CODEC links to avoid breaking systems. This greatly simplifies the userspace usage of such links, making them as simple as analogue connections with the stream configuration being completely transparent to them. This is achieved by defining a new dai_link widget type which is created when CODECs are linked and triggering the configuration of the link via the normal PCM operations from there. It is expected that the bias level callbacks will be used for clock configuration. Currently only the DAI format, rate and channel count can be configured and currently the only DAI operations which can be called are hw_params and digital_mute(). This corresponds well to the majority of CODEC drivers which only use other callbacks for constraint setting but there is obviously much room for extension here. We can't simply call hw_params() on startup as things like the system clocking configuration may change at runtime and in future it will be desirable to offer some configurability of the link parameters. At present we are also restricted to a single DAPM link for the entire DAI. Once we have better support for channel mapping it would also be desirable to extend this feature so that we can propagate per-channel power state over the link. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-04-13ASoC: sh: fsi: use simple-card instead of fsi-ak4642Kuninori Morimoto
This patch uses simple-card driver instead of fsi-ak4642 on each board. To select AK4642 driver, each boards select it on Kconfig. This patch removes fsi-ak4642 driver which is no longer needed Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-13ASoC: add generic simple-card supportKuninori Morimoto
Current ASoC requires card.c file to each platforms in order to specifies its CPU and Codecs pair. But the differences between these were only value/strings of setting. In order to reduce duplicate driver, this patch adds generic/simple-card. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-10ALSA: hda - hide HDMI/ELD printks unless snd.debug=2Fengguang Wu
Also remove two warnings when CONFIG_SND_DEBUG is not set: sound/pci/hda/patch_hdmi.c: In function ‘hdmi_intrinsic_event’: sound/pci/hda/patch_hdmi.c:761:6: warning: unused variable ‘eldv’ [-Wunused-variable] sound/pci/hda/patch_hdmi.c:760:6: warning: unused variable ‘pd’ [-Wunused-variable] Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-04ASoC: dapm: Allow DAPM registers to be 31 bitMark Brown
Supports larger register maps, not using unsigned ints for the full 32 bit as we rely on checking for negative registers. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-04-03ASoC: core: Rework SOC_DOUBLE_R_SX_TLV add SOC_SINGLE_SX_TLVBrian Austin
Some codecs namely Cirrus Logic Codecs have a way of wrapping the dB scale around 0dB without 0dB being in the middle. Rework of SOC_DOUBLE_R_SX_TLV to be more consistent with other asoc tlv macros. Add single register macro : SOC_SINGLE_SX_TLV. Use snd_soc_info_volsw for .info Use snd_soc_get_volsw_sx, snd_soc_put_volsw_sx for single and double. kcontrols for CS42L51 and CS42L73 are adjusted to these new TLV Macros. The max value is determined by: (number of steps) +1 for 0dB +max from codec datasheet. Signed-off-by: Brian Austin <brian.austin@cirrus.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-01ASoC: dapm: Remove SND_SOC_DAPM_MICBIAS_E()Mark Brown
There are no users any more and new drivers should be using supply widgets which fully replace it anyway. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Zeng Zhaoming <zengzm.kernel@gmail.com>
2012-04-01ASoC: max98095: add jack detectionRhyland Klein
This change adds the logic to support using the jack detect mechanism built in to the codec to detect both when a jack was inserted and what type of jack is present. This change also supports the use of an external mechanism for headphone detection. If this mechanism exists, when the max98095_jack_detect function is called, the hp_jack is simply passed NULL. This change supports both simple headphones, powered headphones, microphones and headsets with both headphones and a mic. Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-01ASoC: core: Use driver core probe deferralMark Brown
In version 3.4 the driver core acquired probe deferral which is a core way of doing essentially the same thing as ASoC has been doing since forever to make sure that all the devices needed to make up the card are present without needing open coding in the subsystem. Make basic use of this probe deferral mechanism for the cards, removing the need to handle partially instantiated cards. We should be able to remove even more code than this, though some of the checks we're currently doing should stay since they're about things like suppressing unneeded DAPM runs rather than deferring probes. In order to avoid robustness issues with our teardown paths (which do need quite a bit of TLC) add a check for aux_devs prior to attempting to set things up, this means that we've got a reasonable idea that everything will be there before we start. As with the removal of partial instantiation support more work will be needed to make this work neatly. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-04-01ASoC: jack: Push locking for jacks down to the jackMark Brown
Currently operations on jack reporting take the CODEC mutex both to protect the current jack status and also to protect the DAPM run which is triggered on status updates. Since the addition of a DAPM-specific lock we no longer need to worry about locking DAPM as it has its own finer grained lock so create a per jack lock to take care of the jack status. This is both cleaner where the jack isn't specifically associated with a CODEC and clearer as it's much more obvious what the lock is protecting. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-01ASoC: dapm: Add regulator member to struct dapm_widgetLiam Girdwood
Currently DAPM widgets use the private data for their regulator. Add a regulator * for widgets to use instead of private data. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-01ASoC: dapm: Rename dapm mutex subclass to better match usageLiam Girdwood
Rename SND_SOC_DAPM_CLASS_PCM to SND_SOC_DAPM_CLASS_RUNTIME to better match the usage and align with card mutex too. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-01ASoC: core: Rename card mutex subclass to better align with usageLiam Girdwood
Change SND_SOC_CARD_CLASS_PCM to SND_SOC_CARD_CLASS_RUNTIME to better describe all uses for this mutex subclass and align with DAPM too. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-01ASoC: dapm: Add platform stream event supportLiam Girdwood
Currently stream events are only perfomed on codec stream widgets only. There is now a need to be able to perform stream events on platform widgets too. e.g. we have the ABE platform driver with several DAI links to dummy codecs. We need to be able to perform stream events on any of the dummy codec DAI links. This patch also removes the snd_soc_dai * parameter since it's already contained within the rtd * parameter. Finally makle stream event return void since no one checks it anyway. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-01ASoC: core: Add platform DAI widget mappingLiam Girdwood
Add platform driver support for CPU DAI DAPM widgets. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-01ASoC: dapm: Use DAPM mutex for DAPM ops instead of codec mutexLiam Girdwood
It has now become necessary to use a DAPM mutex instead of the codec mutex to lock the DAPM operations. This is due to the recent multi component support and forth coming Dynamic PCM updates. Currently we lock DAPM operations with the codec mutex of the calling RTD context. However, DAPM operations can span the whole card context and all components. This patch updates the DAPM operations that use the codec mutex to now use the DAPM mutex PCM subclass for all DAPM ops. We also add a mutex subclass for DAPM init and PCM operations. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-01ASoC: core: Add card mutex locking subclassesLiam Girdwood
This is the first part of a change that is intended to improve ASoC locking protection for DAPM and PCM operations. This part of the series adds a mutex class for the soc_card mutex. The SND_SOC_CARD_CLASS_INIT class is used for card initialisation only whilst the SND_SOC_CARD_CLASS_PCM class is used for the forth coming Dynamic PCM operations. The new mutex classes are required otherwise we will see a false positive mutex deadlock warning between the card initialisation and the PCM operations (something that would never deadlock in real life). Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-24Merge tag 'device-for-3.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux Pull <linux/device.h> avoidance patches from Paul Gortmaker: "Nearly every subsystem has some kind of header with a proto like: void foo(struct device *dev); and yet there is no reason for most of these guys to care about the sub fields within the device struct. This allows us to significantly reduce the scope of headers including headers. For this instance, a reduction of about 40% is achieved by replacing the include with the simple fact that the device is some kind of a struct. Unlike the much larger module.h cleanup, this one is simply two commits. One to fix the implicit <linux/device.h> users, and then one to delete the device.h includes from the linux/include/ dir wherever possible." * tag 'device-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: device.h: audit and cleanup users in main include dir device.h: cleanup users outside of linux/include (C files)
2012-03-23Merge branch 'akpm' (Andrew's patch-bomb)Linus Torvalds
Merge second batch of patches from Andrew Morton: - various misc things - core kernel changes to prctl, exit, exec, init, etc. - kernel/watchdog.c updates - get_maintainer - MAINTAINERS - the backlight driver queue - core bitops code cleanups - the led driver queue - some core prio_tree work - checkpatch udpates - largeish crc32 update - a new poll() feature for the v4l guys - the rtc driver queue - fatfs - ptrace - signals - kmod/usermodehelper updates - coredump - procfs updates * emailed from Andrew Morton <akpm@linux-foundation.org>: (141 commits) seq_file: add seq_set_overflow(), seq_overflow() proc-ns: use d_set_d_op() API to set dentry ops in proc_ns_instantiate(). procfs: speed up /proc/pid/stat, statm procfs: add num_to_str() to speed up /proc/stat proc: speed up /proc/stat handling fs/proc/kcore.c: make get_sparsemem_vmemmap_info() static coredump: add VM_NODUMP, MADV_NODUMP, MADV_CLEAR_NODUMP coredump: remove VM_ALWAYSDUMP flag kmod: make __request_module() killable kmod: introduce call_modprobe() helper usermodehelper: ____call_usermodehelper() doesn't need do_exit() usermodehelper: kill umh_wait, renumber UMH_* constants usermodehelper: implement UMH_KILLABLE usermodehelper: introduce umh_complete(sub_info) usermodehelper: use UMH_WAIT_PROC consistently signal: zap_pid_ns_processes: s/SEND_SIG_NOINFO/SEND_SIG_FORCED/ signal: oom_kill_task: use SEND_SIG_FORCED instead of force_sig() signal: cosmetic, s/from_ancestor_ns/force/ in prepare_signal() paths signal: give SEND_SIG_FORCED more power to beat SIGNAL_UNKILLABLE Hexagon: use set_current_blocked() and block_sigmask() ...
2012-03-23headers: include linux/types.h where appropriateBobby Powers
This addresses some header check warnings. DRM headers which include "drm.h" have been excluded, as they indirectly include types.h. Signed-off-by: Bobby Powers <bobbypowers@gmail.com> Cc: Chris Ball <cjb@laptop.org> Cc: Dave Airlie <airlied@linux.ie> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - V4L2 API additions to better support JPEG compression control - media API additions to properly support MPEG decoders - V4L2 API additions for image crop/scaling - a few other V4L2 API DocBook fixes/improvements - two new DVB frontend drivers: m88rs2000 and rtl2830 - two new DVB drivers: az6007 and rtl28xxu - a framework for ISA drivers, that removed lots of common code found at the ISA radio drivers - a new FM transmitter driver (radio-keene) - a GPIO-based IR receiver driver - a new sensor driver: mt9m032 - some new video drivers: adv7183, blackfin, mx2_emmaprp, sii9234_drv, vs6624 - several new board additions, driver fixes, improvements and cleanups. * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (295 commits) [media] update CARDLIST.em28xx [media] partially reverts changeset fa5527c [media] stb0899: fix the limits for signal strength values [media] em28xx: support for 2304:0242 PCTV QuatroStick (510e) [media] em28xx: support for 2013:0251 PCTV QuatroStick nano (520e) [media] -EINVAL -> -ENOTTY [media] gspca - sn9c20x: Cleanup source [media] gspca - sn9c20x: Simplify register write for capture start/stop [media] gspca - sn9c20x: Add automatic JPEG compression mechanism [media] gspca - sn9c20x: Greater delay in case of sensor no response [media] gspca - sn9c20x: Optimize the code of write sequences [media] gspca - sn9c20x: Add the JPEG compression quality control [media] gspca - sn9c20x: Add a delay after Omnivision sensor reset [media] gspca - sn9c20x: Propagate USB errors to higher level [media] gspca - sn9c20x: Use the new video control mechanism [media] gspca - sn9c20x: Fix loss of frame start [media] gspca - zc3xx: Lack of register 08 value for sensor cs2102k [media] gspca - ov534_9: Add brightness to OmniVision 5621 sensor [media] gspca - zc3xx: Add V4L2_CID_JPEG_COMPRESSION_QUALITY control support [media] pvrusb2: fix 7MHz & 8MHz DVB-T tuner support for HVR1900 rev D1F5 ...
2012-03-19Merge tag 'v3.3' into staging/for_v3.4Mauro Carvalho Chehab
* tag 'v3.3': (1646 commits) Linux 3.3 Don't limit non-nested epoll paths netfilter: ctnetlink: fix race between delete and timeout expiration ipv6: Don't dev_hold(dev) in ip6_mc_find_dev_rcu. nilfs2: fix NULL pointer dereference in nilfs_load_super_block() nilfs2: clamp ns_r_segments_percentage to [1, 99] afs: Remote abort can cause BUG in rxrpc code afs: Read of file returns EBADMSG C6X: remove dead code from entry.S wimax/i2400m: fix erroneous NETDEV_TX_BUSY use net/hyperv: fix erroneous NETDEV_TX_BUSY use net/usbnet: reserve headroom on rx skbs bnx2x: fix memory leak in bnx2x_init_firmware() bnx2x: fix a crash on corrupt firmware file sch_sfq: revert dont put new flow at the end of flows ipv6: fix icmp6_dst_alloc() MAINTAINERS: Add Serge as maintainer of capabilities drivers/video/backlight/s6e63m0.c: fix corruption storing gamma mode MAINTAINERS: add entry for exynos mipi display drivers MAINTAINERS: fix link to Gustavo Padovans tree ...
2012-03-19[media] tea575x-tuner: update to latest V4L2 framework requirementsHans Verkuil
The tea575x-tuner module has been updated to use the latest V4L2 framework functionality. This also required changes in the drivers that rely on it. The tea575x changes are: - The drivers must provide a v4l2_device struct to the tea module. - The radio_nr module parameter must be part of the actual radio driver, and not of the tea module. - Changed the frequency range to the normal 76-108 MHz range instead of 50-150. - Add hardware frequency seek support. - Fix broken rxsubchans/audmode handling. - The application can now select between stereo and mono. - Support polling for control events. - Add V4L2 priority handling. And radio-sf16fmr2.c now uses the isa bus kernel framework. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Thanks-to: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-18Merge branch 'topic/jack' into for-linusTakashi Iwai
2012-03-18Merge branch 'topic/asoc' into for-linusTakashi Iwai
2012-03-18Merge branch 'topic/misc' into for-linusTakashi Iwai
2012-03-16device.h: audit and cleanup users in main include dirPaul Gortmaker
The <linux/device.h> header includes a lot of stuff, and it in turn gets a lot of use just for the basic "struct device" which appears so often. Clean up the users as follows: 1) For those headers only needing "struct device" as a pointer in fcn args, replace the include with exactly that. 2) For headers not really using anything from device.h, simply delete the include altogether. 3) For headers relying on getting device.h implicitly before being included themselves, now explicitly include device.h 4) For files in which doing #1 or #2 uncovers an implicit dependency on some other header, fix by explicitly adding the required header(s). Any C files that were implicitly relying on device.h to be present have already been dealt with in advance. Total removals from #1 and #2: 51. Total additions coming from #3: 9. Total other implicit dependencies from #4: 7. As of 3.3-rc1, there were 110, so a net removal of 42 gives about a 38% reduction in device.h presence in include/* Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-03-15ALSA: pcm: Constify the list in snd_pcm_hw_constraint_listMark Brown
Allows the constraint lists to be declared const by drivers which seems reasonable; there's plenty of other constification we could do if we were being complete but this was easy and quick. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-03-13ALSA: ymfpci - Fix legacy registers on S3/S4 resumeTakashi Iwai
We need to resume two legacy registers to recover MIDI/FM functionality on S3/S4 resume, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-03-12ALSA: Add a hook capability to vmaster controlsTakashi Iwai
This patch adds a hook to vmaster control to be called at each time when the master value is changed. It'd be handy for an additional mute LED control following the Master switch, for example. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-03-06ASoC: core: Add platform component mutexLiam Girdwood
Add mutex support for platform IO operations. e.g. can be used for platform DAPM widget IO ops. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-04ASoC: core: Split the union for CODEC/platform in the DAIMark Brown
There's now core code which falls back to global CODEC operations for DAI calls that needs to be able to tell if it's dealing with a CPU or CODEC DAI and given the small number of DAIs in a typical system and overall memory usage pattern saving a pointer per DAI is really not worth the effort. Reported-by: Ian Lartey <ian@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-03-02ASoC: Add dmaengine PCM helper functionsLars-Peter Clausen
This patch adds a set of functions which are intended to be used when implementing a dmaengine based sound PCM driver. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Tested-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Vinod Koul <vinod.koul@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-27ALSA: Use a define for the number of jack switch typesMark Brown
This is intended to facilitate the merge of the two jack detection mechanisms. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>