summaryrefslogtreecommitdiffstats
path: root/include/video
AgeCommit message (Collapse)Author
2010-03-12broadsheetfb: support storing waveformJaya Kumar
This patch adds waveform storing capability to broadsheetfb. It uses the firmware class to retrieve the waveform, and the request to initiate the waveform storing is done via a driver sysfs entry, loadstore_waveform. Broadsheet is a framebuffer device. It is slightly different from a typical framebuffer controller that drives a normal TFT-LCD display. Most E-Ink display panels require a waveform in order to function. That is, in order to drive the state of a pixel to black, gray, or white, a specific waveform is utilized. Basically, that waveform represents the specific E-field wiggling needed to get the pixel to its optimal state given current temperature, and its previous state. TN/IPS-LCDs use a similar concept but the driving waveform is sufficiently simple that it is internalized in the TFT source/gate driver. These E-Ink waveforms are specific to a production batch. That is, a batch of display films are produced, then they get characterized and a waveform is generated for that batch. Broadsheet, typically, is attached to its private SPI flash which is then flashed with this waveform. Users won't be able to see the waveform and typically won't ever need to know about it. If however, the display panel attached to broadsheet is changed out, then they will need to update their waveform. That would typically be done at a factory or repair facility rather than by a user. [akpm@linux-foundation.org: fix printk warning] Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12broadsheetfb: add MMIO hooksJaya Kumar
Allow boards with GP-MMIO controllers to provide hooks to broadsheetfb in order to offload cmd/data writes and data reads instead of relying only on host based GPIO wiggling. Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12broadsheetfb: add multiple panel type supportJaya Kumar
Update broadsheetfb to add support for multiple panel types. The 3.7" and 6" are known to work but the 9.7" is untested due to lack of hardware. Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-02-16video: sh_mobile_lcdcfb: Add wait for vsync.Phil Edworthy
Added FBIO_WAITFORVSYNC ioctl for SH-Mobile devices. Tested on MS7724 and MigoR boards against 2.6.33-rc7. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (33 commits) sh: Fix test of unsigned in se7722_irq_demux() sh: mach-ecovec24: Add FSI sound support sh: mach-ecovec24: Add mt9t112 camera support sh: mach-ecovec24: Add tw9910 support sh: MSIOF/mmc_spi platform data for the Ecovec24 board sh: ms7724se: Add ak4642 support sh: Fix up FPU build for SH5 sh: Remove old early serial console code V2 sh: sh5 scif pdata (sh5-101/sh5-103) sh: sh4a scif pdata (sh7757/sh7763/sh7770/sh7780/sh7785/sh7786/x3) sh: sh4a scif pdata (sh7343/sh7366/sh7722/sh7723/sh7724) sh: sh4 scif pdata (sh7750/sh7760/sh4-202) sh: sh3 scif pdata (sh7705/sh770x/sh7710/sh7720) sh: sh2a scif pdata (sh7201/sh7203/sh7206/mxg) sh: sh2 scif pdata (sh7616) sh-sci: Extend sh-sci driver with early console V2 sh: Stub in P3 ioremap support for nommu parts. sh: wire up vmallocinfo support in ioremap() implementations. sh: Make the unaligned trap handler always obey notification levels. sh: Couple kernel and user write page perm bits for CONFIG_X2TLB ...
2009-12-16davinci: fb: update the driver in preparation for addition of power ↵Chaithrika U S
management features Add a helper function to enable raster. Also add one member in the private data structure to track the current blank status, another function pointer which takes in the platform specific callback function to control panel power. These updates will help in adding suspend/resume and frame buffer blank operation features. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into ↵Paul Mundt
sh/for-2.6.33
2009-12-09Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (42 commits) tree-wide: fix misspelling of "definition" in comments reiserfs: fix misspelling of "journaled" doc: Fix a typo in slub.txt. inotify: remove superfluous return code check hdlc: spelling fix in find_pvc() comment doc: fix regulator docs cut-and-pasteism mtd: Fix comment in Kconfig doc: Fix IRQ chip docs tree-wide: fix assorted typos all over the place drivers/ata/libata-sff.c: comment spelling fixes fix typos/grammos in Documentation/edac.txt sysctl: add missing comments fs/debugfs/inode.c: fix comment typos sgivwfb: Make use of ARRAY_SIZE. sky2: fix sky2_link_down copy/paste comment error tree-wide: fix typos "couter" -> "counter" tree-wide: fix typos "offest" -> "offset" fix kerneldoc for set_irq_msi() spidev: fix double "of of" in comment comment typo fix: sybsystem -> subsystem ...
2009-12-09sh: add a start_transfer() callback to the LCDC driverMagnus Damm
This patch adds a ->start_transfer() callback to the driver sh_mobile_lcdcfb.c. The callback is used to program the LCDC panel in the case of one-shot mode. Needed by the LCD controller used on the KFR2R09 board. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-04sgivwfb: Make use of ARRAY_SIZE.Thiago Farina
Cleanup the usage of DBE_VT_SIZE since the kernel already defines the same macro for the same propose. Also clean up a surrounding whitespaces. Signed-off-by: Thiago Farina <tfransosi@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-12-01pxa168fb: remove useless vsync/hsync invert flagJun Nie
fb_var_screeninfo.var has already encoded this information. Signed-off-by: Jun Nie <njun@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-23davinci-fb-frame-buffer-driver-for-ti-da8xx-omap-l1xx-v4Sudhakar Rajashekhara
Since the previous version, return values in ioctl() function have been modified. [akpm@linux-foundation.org: simplify lcd_disable_raster()] Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Pavel Kiryukhin <pkiryukhin@ru.mvista.com> Signed-off-by: Steve Chen <schen@mvista.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23davinci: fb: Frame Buffer driver for TI DA8xx/OMAP-L1xxSudhakar Rajashekhara
Add LCD controller (LCDC) driver for TI's DA8xx/OMAP-L1xx architecture. LCDC specifications can be found at http://www.ti.com/litv/pdf/sprufm0a. LCDC on DA8xx consists of two independent controllers, the Raster Controller and the LCD Interface Display Driver (LIDD) controller. LIDD further supports character and graphic displays. This patch adds support for the graphic display (Sharp LQ035Q3DG01) found on the DA830 based EVM. The EVM details can be found at: http://support.spectrumdigital.com/boards/dskda830/revc/. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Pavel Kiryukhin <pkiryukhin@ru.mvista.com> Signed-off-by: Steve Chen <schen@mvista.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> DESC davinci-fb-frame-buffer-driver-for-ti-da8xx-omap-l1xx-fix EDESC From: Andrew Morton <akpm@linux-foundation.org> fix kconfig indenting Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Pavel Kiryukhin <pkiryukhin@ru.mvista.com> Cc: Steve Chen <schen@mvista.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16fbdev: s1d13xxxfb: add accelerated bitblt functionsKristoffer Ericson
Add accelerated bitblt functions to s1d13xxx based video chipsets, more specificly functions copyarea and fillrect. It has only been tested and activated for 13506 chipsets but is expected to work for the majority of s1d13xxx based chips. This patch also cleans up the driver with respect of whitespaces and other formatting issues. We update the current status comments. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-13fb: add support of LCD display controller on pxa168/910 (base layer)Lennert Buytenhek
This driver is originally written by Lennert, modified by Green to be feature complete, and ported by Jun Nie and Kevin Liu for pxa168/910 processors. The patch adds support for the on-chip LCD display controller, it currently supports the base (graphics) layer only. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Green Wan <gwan@marvell.com> Cc: Peter Liao <pliao@marvell.com> Signed-off-by: Jun Nie <njun@marvell.com> Signed-off-by: Kevin Liu <kliu5@marvell.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-04-13include/video/cyblafb.h: remove it, it's unusedJoe Perches
commit ddb53d48da5b0e691f35e703ac29118747f86c99 ("fbdev: remove cyblafb driver") removed drivers/video/cyblafb.c, but not its .h file Signed-off-by: Joe Perches <joe@perches.com> Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: "Jani Monoses" <jani@ubuntu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07tdfxfb: move I2C functionality into the tdfxfbKrzysztof Helt
The I2C functionality provided by the i2c-voodoo3 driver is moved into the tdfxfb (frame buffer driver for Voodoo3 cards). This way there is no conflict between the i2c driver and the fb driver. The tdfxfb does not make use from the DDC functionality yet but provides all the functionality of the i2c-voodoo3 driver. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01fbdev: update s1d13xxxfb to differ between revisions and production idsKristoffer Ericson
The s1d13xxx chip provides two values of identification value: the Production id (e.g 13506/13505/13806..) and a revision number 0,1,2,3). Together these can help us to differentiate between similiar setups. This patch adds the proper way of grabbing both those values and save them for future reference (in order to decide what functions a card supports, e.g acceleration). We also move away from the concept of all s1d13xxx = s1d13806 when we really support alot more. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: simplify s1d13xxxfb_probe()] Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01fbdev: newport: newport_*wait() return 0 on timeoutRoel Kluin
With a postfix decrement t reaches -1 on timeout which results in a return of 0. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01cirrusfb: Laguna chipset 8bpp fixKrzysztof Helt
Fix 8bpp mode by adding handling of the Laguna chipsets to various places and stop trashing a HDR register which probably does not exist on the Laguna. Fix compilation warnings about uninitialized variables also. Finally, all 8bpp, 16bpp and 32bpp modes work on the Laguna chipset. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01cirrusfb: add Laguna additional overflow registerKrzysztof Helt
Add additional overflow register setting for Laguna chips. Also, simplify some code in the cirrusfb_pan_display() and cirrusfb_blank(). Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01atyfb: fix header file trailing whitespaceRandy Dunlap
Fix trailing whitespace because quilt complained about it. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-10[ARM] 5353/1: fbdev: add E-Ink Broadsheet controller support v3Jaya Kumar
This patch adds support for the E-Ink Broadsheet display controller. Cc: Eric Miao <eric.miao@marvell.com> Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-05atyfb: fix CONFIG_ namespace violationsRandy Dunlap
Fix namespace violations by changing non-kconfig CONFIG_ names to CNFG_*. Fixes breakage in staging/, which adds a real CONFIG_PANEL. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-31headers_check fix: video/uvesafb.hJaswinder Singh Rajput
fix the following 'make headers_check' warning: usr/include/video/uvesafb.h:5: found __[us]{8,16,32,64} type without #include <linux/types.h> Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
2009-01-31headers_check fix: video/sisfb.hJaswinder Singh Rajput
fix the following 'make headers_check' warnings: usr/include/video/sisfb.h:25: include of <linux/types.h> is preferred over <asm/types.h> usr/include/video/sisfb.h:78: found __[us]{8,16,32,64} type without #include <linux/types.h> Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
2008-12-22video: sh_mobile_lcdcfb deferred io supportMagnus Damm
This patch adds sh_mobile_lcdcfb deferred io support for SYS panels. The LCDC hardware block managed by the sh_mobile_lcdcfb driver supports RGB or SYS panel configurations. SYS panels come with an external display controller that is resposible for refreshing the actual LCD panel. RGB panels are controlled directly by the LCDC and they need to be refreshed by the LCDC hardware. In the case of SYS panels we can save some power by configuring the LCDC hardware block in one-shot mode. In this one-shot mode panel refresh is managed by software. This works well together with deferred io since it allows us to stop clocks for most of the time and only enable clocks when we actually want to trigger an update. When there is no fbdev activity the clocks are kept stopped which allows us to deep sleep. The refresh rate in deferred io mode is set using platform data. The same platform data can also be used to disable deferred io mode. As with other deferred io frame buffers user space code should use fsync() on the frame buffer device to trigger an update. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-10Revert "radeonfb: accelerate imageblit and other improvements"Linus Torvalds
This reverts commit b1ee26bab14886350ba12a5c10cbc0696ac679bf, along with the "fixes" for it that all just caused problems: - c4c6fa9891f3d1bcaae4f39fb751d5302965b566 "radeonfb: fix problem with color expansion & alignment" - f3179748a157c21d44d929fd3779421ebfbeaa93 "radeonfb: Disable new color expand acceleration unless explicitely enabled" because even when disabled, it breaks for people. See http://bugzilla.kernel.org/show_bug.cgi?id=12191 for the latest example. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: David S. Miller <davem@davemloft.net> Cc: Krzysztof Halasa <khc@pm.waw.pl> Cc: James Cloos <cloos@jhcloos.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: Jean-Luc Coulon <jean.luc.coulon@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-12atmel_lcdfb: change irq_base definition to allow error reportingNicolas Ferre
Changed because old the definition of unsigned long cannot be negative. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Reported-by: Roel Kluin <roel.kluin@gmail.com> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Andrew Victor <linux@maxim.org.za> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20video: add sh_mobile_lcdc platform flagsMagnus Damm
Add platform data flags for detailed lcd display configuration. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-20video: remove unused sh_mobile_lcdc platform dataMagnus Damm
Remove lddckr from the platform data, these days we calculate the register value from clock source and clock dividers anyway. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-20Merge branch 'master' of ↵Paul Mundt
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: Documentation/kernel-parameters.txt arch/sh/include/asm/elf.h
2008-10-16fbdev: allow more chip revisions in Epson s1d13... video driverKristoffer Ericson
The Epson s1d13xxx hardware is common in many handhelds, but our driver is currently locked to a single chip revision. This patch adds an array of known to work revisions (which can be extended). [akpm@linux-foundation.org: cleanups] Signed-off-by: Kristoffer Ericson <Kristoffer.Ericson@gmail.com> Acked-by: Thibaut Varène <varenet@parisc-linux.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16radeonfb: accelerate imageblit and other improvementsBenjamin Herrenschmidt
Implement support for HW color expansion of 1bpp images, along with some improvements to the FIFO handling and other accel operations. The offset fixup code is now unnecessary as the fbcon core will call our set_par upon switch back from KD_GRAPHICS before anything else happens. I removed it as it would slow down accel operations. The fifo wait has been improved to avoid hitting the HW register as often, and the various accel ops are now performing better caching of register values. Overall, this improve accel performances. The imageblit acceleration does result in a small overall regression in performances on some machines (on the order of 5% on some x86), probably becaus the SW path provides a better bus utilisation, but I decided to ingnore that as the performances is still very good, and on the other hand, some machines such as some sparc64 get a 3 fold performance improvement. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: David S. Miller <davem@davemloft.net> Cc: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16radeonfb: misc cleanup of engine and dst cache handlingBenjamin Herrenschmidt
Fix a couple of incomplete tests of the chip families in the engine init/reset code and proper initialization of the destination cache mode. The result should better match what the latest X radeon driver does. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: David S. Miller <davem@davemloft.net> Cc: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16neofb: remove open_lock mutexKrzysztof Helt
Remove mutex from the fb_open/fb_release functions as these operations are mutexed at fb layer. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16include: replace __FUNCTION__ with __func__Harvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-09Merge branch 'pxa-all' into develRussell King
Conflicts: arch/arm/mach-pxa/Kconfig arch/arm/mach-pxa/corgi.c arch/arm/mach-pxa/include/mach/hardware.h arch/arm/mach-pxa/spitz.c
2008-10-01video: sh_mobile_lcdcfb: Support HAVE_CLK=n configurations.Paul Mundt
This provides a workaround for users of sh_mobile_lcdcfb that don't define HAVE_CLK and have otherwise sane clock initialization. At the same time, move the sh_mobile_lcdc.h header to include/video/. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-18[ARM] 5228/1: Add the RGB555 wiring for the atmel LCDGuillaume GARDET
Add the RGB555 wiring for the atmel LCD. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-26[ARM] 5209/1: metronomefb: changes to use platform framebufferJaya Kumar
These changes are used in order to support the use of the framebuffer provided by the platform device driver rather than to directly allocate one. Other changes are cleanup to error handling and order of release. Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-12atmel_lcdfb: add board parameter specify framebuffer memory sizeHaavard Skinnemoen
Specify how much physically continuous, DMA capable memory will be allocated at driver initialization time. This allow to create framebuffer device with larger virtual resolution. Combine with y-panning this can be used to implement double buffering acceleration method. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-12radeonfb: fix accel engine hangsDavid Miller
Some chips appear to have the 2D engine hang during screen redraw, typically in a sequence of copyarea operations. This appear to be solved by adding a flush of the engine destination pixel cache and waiting for the engine to be idle before issuing the accel operation. The performance impact seems to be fairly small. Here is a trace on an RV370 (PCI device ID 0x5b64), it records the RBBM_STATUS register, then the source x/y, destination x/y, and width/height used for the copy: ---------------------------------------- radeonfb_prim_copyarea: STATUS[00000140] src[210:70] dst[210:60] wh[a0:10] radeonfb_prim_copyarea: STATUS[00000140] src[2b8:70] dst[2b8:60] wh[88:10] radeonfb_prim_copyarea: STATUS[00000140] src[348:70] dst[348:60] wh[40:10] radeonfb_prim_copyarea: STATUS[80020140] src[390:70] dst[390:60] wh[88:10] radeonfb_prim_copyarea: STATUS[8002613f] src[40:80] dst[40:70] wh[28:10] radeonfb_prim_copyarea: STATUS[80026139] src[a8:80] dst[a8:70] wh[38:10] radeonfb_prim_copyarea: STATUS[80026133] src[e8:80] dst[e8:70] wh[80:10] radeonfb_prim_copyarea: STATUS[8002612d] src[170:80] dst[170:70] wh[30:10] radeonfb_prim_copyarea: STATUS[80026127] src[1a8:80] dst[1a8:70] wh[8:10] radeonfb_prim_copyarea: STATUS[80026121] src[1b8:80] dst[1b8:70] wh[88:10] radeonfb_prim_copyarea: STATUS[8002611b] src[248:80] dst[248:70] wh[68:10] ---------------------------------------- When things are going fine the copies complete before the next ROP is even issued, but all of a sudden the 2D unit becomes active (bit 17 in RBBM_STATUS) and the FIFO retry (bit 13) and FIFO pipeline busy (bit 14) are set as well. The FIFO begins to backup until it becomes full. What happens next is the radeon_fifo_wait() times out, and we access the chip illegally leading to a bus error which usually wedges the box. None of this makes it to the console screen, of course :-) radeon_fifo_wait() should be modified to reset the accelerator when this timeout happens instead of programming the chip anyways. ---------------------------------------- radeonfb: FIFO Timeout ! ERROR(0): Cheetah error trap taken afsr[0010080005000000] afar[000007f900800e40] TL1(0) ERROR(0): TPC[595114] TNPC[595118] O7[459788] TSTATE[11009601] ERROR(0): TPC<radeonfb_copyarea+0xfc/0x248> ERROR(0): M_SYND(0), E_SYND(0), Privileged ERROR(0): Highest priority error (0000080000000000) "Bus error response from system bus" ERROR(0): D-cache idx[0] tag[0000000000000000] utag[0000000000000000] stag[0000000000000000] ERROR(0): D-cache data0[0000000000000000] data1[0000000000000000] data2[0000000000000000] data3[0000000000000000] ERROR(0): I-cache idx[0] tag[0000000000000000] utag[0000000000000000] stag[0000000000000000] u[0000000000000000] l[00\ ERROR(0): I-cache INSN0[0000000000000000] INSN1[0000000000000000] INSN2[0000000000000000] INSN3[0000000000000000] ERROR(0): I-cache INSN4[0000000000000000] INSN5[0000000000000000] INSN6[0000000000000000] INSN7[0000000000000000] ERROR(0): E-cache idx[800e40] tag[000000000e049f4c] ERROR(0): E-cache data0[fffff8127d300180] data1[00000000004b5384] data2[0000000000000000] data3[0000000000000000] Ker:xnel panic - not syncing: Irrecoverable deferred error trap. ---------------------------------------- Another quirk is that these copyarea calls will not happen until the first drivers/char/vt.c:redraw_screen() occurs. This will only happen if you 1) VC switch or 2) run "consolechars" or 3) unblank the screen. This seems to happen because until a redraw_screen() the screen scrolling method used by fbcon is not finalized yet. I've seen this with other fb drivers too. So if all you do is boot straight into X you will never see this bug on the relevant chips. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: <stable@kernel.org> [2.6.25.x, 2.6.26.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-05radeon: misc correctionsDavid Miller
I have a new PCI-E radeon RV380 series card (PCI device ID 5b64) that hangs in my sparc64 boxes when the init scripts set the font. The problem goes away if I disable acceleration. I haven't figured out that bug yet, but along the way I found some corrections to make based upon some auditing. 1) The RB2D_DC_FLUSH_ALL value used by the kernel fb driver and the XORG video driver differ. I've made the kernel match what XORG is using. 2) In radeonfb_engine_reset() we have top-level code structure that roughly looks like: if (family is 300, 350, or V350) do this; else do that; ... if (family is NOT 300, OR family is NOT 350, OR family is NOT V350) do another thing; this last conditional makes no sense, is always true, and obviously was likely meant to be "family is NOT 300, 350, or V350". So I've made the code match the intent. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Tested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26include/video/atmel_lcdc.h must #include <linux/workqueue.h>Adrian Bunk
This patch fixes the following compile error caused by commit d22579b837358cbef12ccca5adaf7e93ae09ab7a ("atmel_lcdfb: FIFO underflow management"): In file included from arch/avr32/boards/atstk1000/atstk1004.c:21: include/video/atmel_lcdc.h:40: error: field 'task' has incomplete type Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24neofb: drop the xtimings structureKrzysztof Helt
Remove the xtimings structure which only stored some values to be used later (mostly once). Calculate and use these values in places they are needed. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24lcd: add platform_lcd driverBen Dooks
Add a platform_lcd driver to allow boards with simple lcd power controls to register themselves easily. [akpm@linux-foundation.org: build fix] Signed-off-by: Ben Dooks <ben-linux@fluff.org> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24fb: add support for the ILI9320 video display controllerBen Dooks
Provide support for the ILI9320 display controller chip which is found in many LCD displays. Included with this is support for an example LCD using this chip, the VGG2432A4. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24atmel_lcdfb: FIFO underflow managementNicolas Ferre
Manage atmel_lcdfb FIFO underflow Resetting the LCD and DMA allows to fix screen shifting after a FIFO underflow. It follows reset sequence from errata "LCD Screen Shifting After a Reset". Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Andrew Victor <linux@maxim.org.za> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24tridentfb: add imageblit acceleration for Blade3D familyKrzysztof Helt
Add imageblit acceleration for the Blade3D family of cores. The code is based on code from the cyblafb driver. It is a step toward assimilating back the cyblafb driver into the tridentfb driver. The cyblafb driver handles a subfamily of the Trident Blade3d cores. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>