summaryrefslogtreecommitdiffstats
path: root/include/video
AgeCommit message (Collapse)Author
2007-07-31remove tx3912fbYoichi Yuasa
Remove tx3912fb. Nino has already removed. It is no longer needed. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Acked-by: Ralf Baechle <ralf@linux-mips.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17tgafb: actually allocate memory for the pseudo_paletteAntonino A. Daplas
No memory allocation was done for the pseudo_palette. Allocate one for it. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Acked-by: "Maciej W. Rozycki" <macro@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-11atmel_lcdfb: AT91/AT32 LCD Controller framebuffer driverNicolas Ferre
Adds a framebuffer driver to ATMEL AT91SAM9x and AT32 aka AVR32 platforms. Those chips share quite the same IP and this code is suitable for both architectures. Signed-off-by: Nicolas Ferre <nicolas.ferre@rfo.atmel.com> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-11pm3fb: Preliminary 2.4 to 2.6 portKrzysztof Helt
This is a basic port from 2.4 kernel to 2.6. Acceleration is lost and big endian support probably too. The driver works in 8, 16 and 32 bit mode. [adaplas] - change VESA_* to FB_BLANK_* constants - removed unused function clear_memory - fix uninitialized variable compiler warning - some whitespace cleaning [akpm@linux-foundation.org: Nuke pestiferous CVS string] Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08atyfb: halve XCLK with Mobility and 32bit memoryVille Syrjala
Laptops with Rage Mobility and 32bit memory interface seem to require halved XCLK to operate correctly. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08pm2fb: Permedia 2V memory clock settingKrzysztof Helt
Permedia 2V uses its own registers to set a memory clock. The patch adds these registers and uses them in the set_memclock() function. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08tgafb: TURBOchannel supportMaciej W. Rozycki
This is support for the TC variations of the TGA boards (properly known as SFB+ or Smart Frame Buffer Plus boards). The 8-plane SFB+ board uses the Bt459 RAMDAC (unlike its PCI TGA counterpart, which uses the Bt485), so bits have been added to support this chip as well. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: James Simmons <jsimmons@infradead.org> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] Video: fb, add true ref_count atomicityJiri Slaby
Some of fb drivers uses atomic_t in bad manner, since there are still some race-prone gaps. Use mutexes to protect open/close code sections with ref_count testing and finally use simple uint. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: Denis Oliver Kropp <dok@directfb.org> Cc: James Simmons <jsimmons@infradead.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] remove the broken FB_S3TRIO driverAdrian Bunk
The FB_S3TRIO driver: - has been marked as BROKEN for more than two years and - is still marked as BROKEN. Drivers that had been marked as BROKEN for such a long time seem to be unlikely to be revived in the forseeable future. But if anyone wants to ever revive this driver, the code is still present in the older kernel releases. Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: James Simmons <jsimmons@infradead.org> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2006-12-13[PATCH] sstfb: add sysfs interfaceHelge Deller
Modify the sstfb (Voodoo1/2) driver: - fix a memleak when removing the sstfb module - fix sstfb to use the fbdev default videomode database - add module option "mode_option" to set initial screen mode - add sysfs-interface to turn VGA-passthrough on/off via /sys/class/graphics/fbX/vgapass - remove old debug functions from ioctl interface Signed-off-by: Helge Deller <deller@gmx.de> Acked-By: James Simmons <jsimmons@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08[PATCH] video: pm3fb macros fixMariusz Kozlowski
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08[PATCH] mbxfb: Add YUV video overlay supportRaphael Assenat
This patch adds a way to create and use the video plane (YUV overlay) and scaling video scaling features of the chip. The overlay is configured, resized and modified using a device specific ioctl. Also included in this patch: - If no platform data was passed, print an error and exit instead of crashing. - Added a write_reg(_dly) macro. This improves readability when manipulating chip registers. (no more udelay() after each write). - Comments about some issues. Signed-off-by: Raphael Assenat <raph@8d.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Acked-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03fix file specification in commentsUwe Zeisberger
Many files include the filename at the beginning, serveral used a wrong one. Signed-off-by: Uwe Zeisberger <Uwe_Zeisberger@digi.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-03[PATCH] sstfb: cleanupsAlan Cox
- Remove 24/32bit unused support (the chips don't do 24/32bit anyway) - Clean up printk obfuscation - Clean up lispitus in the if(())()) stuff - Minor tidying No functionality changes, may have a crack at hardware scrolling based on my X driver once the cleanups are in. Signed-off-by: Alan Cox <alan@redhat.com> Cc: Antonino A. Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-19[HEADERS] One line per header in Kbuild files to reduce conflictsDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-07-14[PATCH] mbxfb: Add framebuffer driver for the Intel 2700GMike Rapoport
Add frame buffer driver for the 2700G LCD controller present on CompuLab CM-X270 computer module. [adaplas] - Add more informative help text to Kconfig - Make DEBUG a Kconfig option as FB_MBX_DEBUG - Remove #include mbxdebug.c, this is frowned upon - Remove redundant casts - Arrange #include's alphabetically - Trivial whitespace Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-18Add generic Kbuild files for 'make headers_install'David Woodhouse
This adds the Kbuild files listing the files which are to be installed by the 'headers_install' make target, in generic directories. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-04-26Don't include linux/config.h from anywhere else in include/David Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-03-25[PATCH] Remove MODULE_PARMRusty Russell
MODULE_PARM was actually breaking: recent gcc version optimize them out as unused. It's time to replace the last users, which are generally in the most unloved drivers anyway. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-15[PATCH] neofb: avoid resetting display config on unblank (v2)Christian Trefzer
There were two mistakes in the register-read-on-(un)blank approach. - First, without proper register (un)locking the value read back will always be zero, and this is what I missed entirely until just now. Due to this, the logic could not be verified at all and I tried some bogus checks which are completely stupid. - Second, the LCD status bit will always be set to zero when the backlight has been turned off. Reading the value back during unblank will disable the LCD unconditionally, regardless of the state it is supposed to be in, since we set it to zero beforehand. So this is what we do now: - create a new variable in struct neofb_par, and use that to determine whether to read back registers (initialized to true) - before actually blanking the screen, read back the register to sense any possible change made through Fn key combo - use proper neoUnlock() / neoLock() to actually read something - every call to neofb_blank() determines if we read back next time: blanking disables readback, unblanking (FB_BLANK_UNBLANK) enables it This should give us a nice and clean state machine. Has been thoroughly tested on a Dell Latitude CPiA / NM220 Chip docked to a C/Dock2 with attached CRT in all possible combinations of LCD/CRT on/off. I changed the config via Fn key, let the console blank, unblanked by keypress - works flawlessly. Signed-off-by: Christian Trefzer <ctrefzer@gmx.de> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10[PATCH] include/video/newport.h: "extern inline" -> "static inline"Adrian Bunk
"extern inline" doesn't make much sense. Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10[PATCH] fbdev: sstfb: Driver cleanupsAntonino A. Daplas
- remove unneeded casts - make setcolreg return success if regno > 15, but don't do anything - use framebuffer_alloc/framebuffer_release to allocate/free memory Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10[PATCH] fbdev: tdfxfb: Driver cleanupsAntonino A. Daplas
- remove unneeded casts - move memory for pseudo_palette inside struct tdfxfb_par - whitespace changes Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10[PATCH] fbdev: neofb: Driver cleanupsAntonino A. Daplas
- remove unneeded casts - move memory for pseudo_palette inside struct neofb_par Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10[PATCH] fbdev: kyrofb: Driver cleanupsAntonino A. Daplas
- remove unneeded casts - use framebuffer_alloc/framebuffer_release to allocate/free memory - the pseudo_palette is always u32 regardless of bpp if using generic drawing functions Signed-off-by: Antonino Daplas <adaplas@pol.net> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-09[PATCH] Update cyblafb driverKnut Petersen
This is a major update to the cyblafb framebuffer driver. Most of the stuff has been tested in the mm tree. Main advantages: ============ - vxres > xres support - ywrap and xpan support - much faster for almost all modes (e.g. 1280x1024-16bpp draws more than 41 full screens of text instead of about 25 full screens of text per second on authors Epia 5000) - module init/exit code fixed - bugs triggered by console rotation fixed - lots of minor improvements - startup modes suitable for high performance scrolling in all directions This diff also contains a lot of white space fixes. No side effects are possible, only one single graphics core is affected. Signed-off-by: Knut Petersen <Knut_Petersen@t-online.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-13[PATCH] drivers/video: Replace custom macro with isdigit()Tobias Klauser
Replace the custom CHAR_IS_NUM() macro with isdigit() from <linux/ctype.h> Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch> Acked-by: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-13[PATCH] SharpSL: Abstract c7x0 specifics from Corgi Touchscreen driverRichard Purdie
Separate out the Sharp Zaurus c7x0 series specific code from the Corgi Touchscreen driver. Use the new functions in corgi_lcd.c via sharpsl.h for hsync handling and pass the IRQ as a platform device resource. Move a function prototype into the w100fb header file where it belongs. This enables the driver to be used by the Zaurus cxx00 series. Signed-Off-by: Richard Purdie <rpurdie@rpsys.net> Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] framebuffer: new driver for cyberblade/i1 graphics coreKnut Petersen
This is a framebuffer driver for the Cyberblade/i1 graphics core. Currently tridenfb claims to support the cyberblade/i1 graphics core. This is of very limited truth. Even vesafb is faster and provides more working modes and a much better quality of the video signal. There is a great number of bugs in tridentfb ... but most often it is impossible to decide if these bugs are real bugs or if fixing them for the cyberblade/i1 core would break support for one of the other supported chips. Tridentfb seems to be unmaintained,and documentation for most of the supported chips is not available. So "fixing" cyberblade/i1 support inside of tridentfb was not an option, it would have caused numerous if(CYBERBLADEi1) else ... cases and would have rendered the code to be almost unmaintainable. A first version of this driver was published on 2005-07-31. A fix for a bug reported by Jochen Hein was integrated as well as some changes requested by Antonino A. Daplas. A message has been added to tridentfb to inform current users of tridentfb to switch to cyblafb if the cyberblade/i1 graphics core is detected. This patch is one logical change, but because of the included documentation it is bigger than 70kb. Therefore it is not sent to lkml and linux-fbdev-devel, Signed-off-by: Knut Petersen <Knut_Petersen@t-online.de> Cc: Muli Ben-Yehuda <mulix@mulix.org> Acked-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] sisfb updateThomas Winischhofer
This lifts sisfb from version 1.7.17 to version 1.8.9. Changes include: - Added support for XGI V3XT, V5, V8, Z7 chipsets, including POSTing of all of these chipsets. - Added support for latest SiS chipsets (761). - Added support for SiS76x memory "hybrid" mode. - Added support for new LCD resolutions (eg 1280x854, 856x480). - Fixed support for 320x240 STN panels (for embedded devices). - Fixed many HDTV modes (525p, 750p, 1080i). - Fixed PCI config register reading/writing to use proper kernel functions for this purpose. - Fixed PCI ROM handling to use the kernel's proper functions. - Removed lots of "typedef"s. - Removed lots of code which was for X.org/XFree86 only. - Fixed coding style in many places. - Removed lots of 2.4 cruft. - Reduced stack size by unifying two previously separate structs into one. - Added new hooks for memory allocation (for DRM). Now the driver can truly handle multiple cards, including memory management. - Fixed numerous minor bugs. Signed-off-by: Thomas Winischhofer <thomas@winischhofer.net> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07[PATCH] w100fb: Rewrite for platform independenceRichard Purdie
The code w100fb was based on was horribly Sharp SL-C7x0 specific and there was little else that could be done as I had no access to anything else with a w100 in it. There is no real documentation about this chipset available. Ian Molton has access to other platforms with the w100 (Toshiba e-series) and so between us, we've improved w100fb and made it platform independent. Ian Molton also added support for the very similar w3220 and w3200 chipsets. There are a lot of changes here and it nearly amounts to a rewrite of the driver but it has been extensively tested and is being used in preference to the original driver in the Zaurus community. I'd therefore like to update the mainline code to reflect this. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Acked-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05[PATCH] DEC PMAGB B framebuffer updateRalf Baechle
Revive HX frame buffer support for 2.6. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05[PATCH] DEC PMAG BA frame buffer updateRalf Baechle
Rewrite PMAG BA frame buffer driver for 2.6. Acked-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01[PATCH] Clean-up and bug fix for tdfxfb framebuffer size detectionRichard Drummond
Attached is a patch against 2.6.11.7 which tidies up the tdfxfb framebuffer size detection code a little and fixes the broken support for Voodoo4/5 cards. (I haven't tested this on a Voodoo5, however, because I don't have the hardware). Signed-off-by: Richard Drummond <evilrich@rcdrummond.net> Cc: <linux-fbdev-devel@lists.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01[PATCH] fbdev: edid.h cleanupsAdrian Bunk
This patch removes some completely unused code. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!