summaryrefslogtreecommitdiffstats
path: root/include/xen/interface
AgeCommit message (Collapse)Author
2013-03-31Merge tag 'for-linus-20130331' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "Alright, this time from 10K up in the air. Collection of fixes that have been queued up since the merge window opened, hence postponed until later in the cycle. The pull request contains: - A bunch of fixes for the xen blk front/back driver. - A round of fixes for the new IBM RamSan driver, fixing various nasty issues. - Fixes for multiple drives from Wei Yongjun, bad handling of return values and wrong pointer math. - A fix for loop properly killing partitions when being detached." * tag 'for-linus-20130331' of git://git.kernel.dk/linux-block: (25 commits) mg_disk: fix error return code in mg_probe() rsxx: remove unused variable rsxx: enable error return of rsxx_eeh_save_issued_dmas() block: removes dynamic allocation on stack Block: blk-flush: Fixed indent code style cciss: fix invalid use of sizeof in cciss_find_cfgtables() loop: cleanup partitions when detaching loop device loop: fix error return code in loop_add() mtip32xx: fix error return code in mtip_pci_probe() xen-blkfront: remove frame list from blk_shadow xen-blkfront: pre-allocate pages for requests xen-blkback: don't store dev_bus_addr xen-blkfront: switch from llist to list xen-blkback: fix foreach_grant_safe to handle empty lists xen-blkfront: replace kmalloc and then memcpy with kmemdup xen-blkback: fix dispatch_rw_block_io() error path rsxx: fix missing unlock on error return in rsxx_eeh_remap_dmas() Adding in EEH support to the IBM FlashSystem 70/80 device driver block: IBM RamSan 70/80 error message bug fix. block: IBM RamSan 70/80 branding changes. ...
2013-03-22Merge branch 'stable/for-jens-3.9' of ↵Jens Axboe
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen into for-linus Konrad writes: [the branch] has a bunch of fixes. They vary from being able to deal with unknown requests, overflow in statistics, compile warnings, bug in the error path, removal of unnecessary logic. There is also one performance fix - which is to allocate pages for requests when the driver loads - instead of doing it per request
2013-03-22xen-pciback: notify hypervisor about devices intended to be assigned to guestsJan Beulich
For MSI-X capable devices the hypervisor wants to write protect the MSI-X table and PBA, yet it can't assume that resources have been assigned to their final values at device enumeration time. Thus have pciback do that notification, as having the device controlled by it is a prerequisite to assigning the device to guests anyway. This is the kernel part of hypervisor side commit 4245d33 ("x86/MSI: add mechanism to fully protect MSI-X table from PV guest accesses") on the master branch of git://xenbits.xen.org/xen.git. CC: stable@vger.kernel.org Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-03-11xen/blkback: correctly respond to unknown, non-native requestsDavid Vrabel
If the frontend is using a non-native protocol (e.g., a 64-bit frontend with a 32-bit backend) and it sent an unrecognized request, the request was not translated and the response would have the incorrect ID. This may cause the frontend driver to behave incorrectly or crash. Since the ID field in the request is always in the same place, regardless of the request type we can get the correct ID and make a valid response (which will report BLKIF_RSP_EOPNOTSUPP). This bug affected 64-bit SLES 11 guests when using a 32-bit backend. This guest does a BLKIF_OP_RESERVED_1 (BLKIF_OP_PACKET in the SLES source) and would crash in blkif_int() as the ID in the response would be invalid. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Cc: stable@vger.kernel.org Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-02-20xen: event channel arrays are xen_ulong_t and not unsigned longIan Campbell
On ARM we want these to be the same size on 32- and 64-bit. This is an ABI change on ARM. X86 does not change. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Jan Beulich <JBeulich@suse.com> Cc: Keir (Xen.org) <keir@xen.org> Cc: Tim Deegan <tim@xen.org> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: linux-arm-kernel@lists.infradead.org Cc: xen-devel@lists.xen.org Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-02-19xen/acpi: ACPI cpu hotplugLiu Jinsong
This patch implement real Xen ACPI cpu hotplug driver as module. When loaded, it replaces Xen stub driver. For booting existed cpus, the driver enumerates them. For hotadded cpus, which added at runtime and notify OS via device or container event, the driver is invoked to add them, parsing cpu information, hypercalling to Xen hypervisor to add them, and finally setting up new /sys interface for them. Signed-off-by: Liu Jinsong <jinsong.liu@intel.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-02-19xen/acpi: ACPI memory hotplugLiu Jinsong
This patch implements real Xen acpi memory hotplug driver as module. When loaded, it replaces Xen stub driver. When an acpi memory device hotadd event occurs, it notifies OS and invokes notification callback, adding related memory device and parsing memory information, finally hypercall to xen hypervisor to add memory. Signed-off-by: Liu Jinsong <jinsong.liu@intel.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-02-19xen: implement updated XENMEM_add_to_physmap_range ABIIan Campbell
Allows for more fine grained error reporting. Only used by PVH and ARM both of which are marked EXPERIMENTAL precisely because the ABI is not yet stable Signed-off-by: Ian Campbell <ian.campbell@citrix.com> [v1: Rebased without PVH patches] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-12-17xen: Add EVTCHNOP_reset in Xen interface header files.Wei Liu
Signed-off-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-11-30Merge branch 'arm-privcmd-for-3.8' of ↵Konrad Rzeszutek Wilk
git://xenbits.xen.org/people/ianc/linux into stable/for-linus-3.8 * 'arm-privcmd-for-3.8' of git://xenbits.xen.org/people/ianc/linux: xen: arm: implement remap interfaces needed for privcmd mappings. xen: correctly use xen_pfn_t in remap_domain_mfn_range. xen: arm: enable balloon driver xen: balloon: allow PVMMU interfaces to be compiled out xen: privcmd: support autotranslated physmap guests. xen: add pages parameter to xen_remap_domain_mfn_range Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-11-29xen: arm: implement remap interfaces needed for privcmd mappings.Ian Campbell
We use XENMEM_add_to_physmap_range which is the preferred interface for foreign mappings. Acked-by: Mukesh Rathor <mukesh.rathor@oracle.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-11-28xen/acpi: Move the xen_running_on_version_or_later function.Konrad Rzeszutek Wilk
As on ia64 builds we get: include/xen/interface/version.h: In function 'xen_running_on_version_or_later': include/xen/interface/version.h:76: error: implicit declaration of function 'HYPERVISOR_xen_version' We can later on make this function exportable if there are modules using part of it. For right now the only two users are built-in. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-11-26xen/acpi: Fix compile error by missing decleration for xen_domain.Konrad Rzeszutek Wilk
Commit 92e3229dcdc80ff0b6304f14c578d76e7e10e226 ("xen/acpi: ACPI PAD driver") adds a new function but forgets to use the right header. Without it, we get: In file included from drivers/xen/features.c:15:0: include/xen/interface/version.h: In function ‘xen_running_on_version_or_later’: include/xen/interface/version.h:72:2: error: implicit declaration of function ‘xen_domain’ [-Werror=implicit-function-declaration] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-11-26xen/acpi: ACPI PAD driverLiu, Jinsong
PAD is acpi Processor Aggregator Device which provides a control point that enables the platform to perform specific processor configuration and control that applies to all processors in the platform. This patch is to implement Xen acpi pad logic. When running under Xen virt platform, native pad driver would not work. Instead Xen pad driver, a self-contained and thin logic level, would take over acpi pad logic. When acpi pad notify OSPM, xen pad logic intercept and parse _PUR object to get the expected idle cpu number, and then hypercall to hypervisor. Xen hypervisor would then do the rest work, say, core parking, to idle specific number of cpus on its own policy. Signed-off-by: Jan Beulich <JBeulich@suse.com> Signed-off-by: Liu Jinsong <jinsong.liu@intel.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-10-19Merge commit 'v3.7-rc1' into stable/for-linus-3.7Konrad Rzeszutek Wilk
* commit 'v3.7-rc1': (10892 commits) Linux 3.7-rc1 x86, boot: Explicitly include autoconf.h for hostprogs perf: Fix UAPI fallout ARM: config: make sure that platforms are ordered by option string ARM: config: sort select statements alphanumerically UAPI: (Scripted) Disintegrate include/linux/byteorder UAPI: (Scripted) Disintegrate include/linux UAPI: Unexport linux/blk_types.h UAPI: Unexport part of linux/ppp-comp.h perf: Handle new rbtree implementation procfs: don't need a PATH_MAX allocation to hold a string representation of an int vfs: embed struct filename inside of names_cache allocation if possible audit: make audit_inode take struct filename vfs: make path_openat take a struct filename pointer vfs: turn do_path_lookup into wrapper around struct filename variant audit: allow audit code to satisfy getname requests from its names_list vfs: define struct filename and have getname() return it btrfs: Fix compilation with user namespace support enabled userns: Fix posix_acl_file_xattr_userns gid conversion userns: Properly print bluetooth socket uids ...
2012-10-19xen: grant: use xen_pfn_t type for frame_list.Ian Campbell
This correctly sizes it as 64 bit on ARM but leaves it as unsigned long on x86 (therefore no intended change on x86). The long and ulong guest handles are now unused (and a bit dangerous) so remove them. Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-10-19xen: XENMEM_translate_gpfn_list was remove ages ago and is unused.Ian Campbell
Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-10-12Merge tag 'stable/for-linus-3.7-rc0-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen fixes from Konrad Rzeszutek Wilk: "This has four bug-fixes and one tiny feature that I forgot to put initially in my tree due to oversight. The feature is for kdump kernels to speed up the /proc/vmcore reading. There is a ram_is_pfn helper function that the different platforms can register for. We are now doing that. The bug-fixes cover some embarrassing struct pv_cpu_ops variables being set to NULL on Xen (but not baremetal). We had a similar issue in the past with {write|read}_msr_safe and this fills the three missing ones. The other bug-fix is to make the console output (hvc) be capable of dealing with misbehaving backends and not fall flat on its face. Lastly, a quirk for older XenBus implementations that came with an ancient v3.4 hypervisor (so RHEL5 based) - reading of certain non-existent attributes just hangs the guest during bootup - so we take precaution of not doing that on such older installations. Feature: - Register a pfn_is_ram helper to speed up reading of /proc/vmcore. Bug-fixes: - Three pvops call for Xen were undefined causing BUG_ONs. - Add a quirk so that the shutdown watches (used by kdump) are not used with older Xen (3.4). - Fix ungraceful state transition for the HVC console." * tag 'stable/for-linus-3.7-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/pv-on-hvm kexec: add quirk for Xen 3.4 and shutdown watches. xen/bootup: allow {read|write}_cr8 pvops call. xen/bootup: allow read_tscp call for Xen PV guests. xen pv-on-hvm: add pfn_is_ram helper for kdump xen/hvc: handle backend CLOSED without CLOSING
2012-10-07Merge tag 'stable/for-linus-3.7-arm-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull ADM Xen support from Konrad Rzeszutek Wilk: Features: * Allow a Linux guest to boot as initial domain and as normal guests on Xen on ARM (specifically ARMv7 with virtualized extensions). PV console, block and network frontend/backends are working. Bug-fixes: * Fix compile linux-next fallout. * Fix PVHVM bootup crashing. The Xen-unstable hypervisor (so will be 4.3 in a ~6 months), supports ARMv7 platforms. The goal in implementing this architecture is to exploit the hardware as much as possible. That means use as little as possible of PV operations (so no PV MMU) - and use existing PV drivers for I/Os (network, block, console, etc). This is similar to how PVHVM guests operate in X86 platform nowadays - except that on ARM there is no need for QEMU. The end result is that we share a lot of the generic Xen drivers and infrastructure. Details on how to compile/boot/etc are available at this Wiki: http://wiki.xen.org/wiki/Xen_ARMv7_with_Virtualization_Extensions and this blog has links to a technical discussion/presentations on the overall architecture: http://blog.xen.org/index.php/2012/09/21/xensummit-sessions-new-pvh-virtualisation-mode-for-arm-cortex-a15arm-servers-and-x86/ * tag 'stable/for-linus-3.7-arm-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: (21 commits) xen/xen_initial_domain: check that xen_start_info is initialized xen: mark xen_init_IRQ __init xen/Makefile: fix dom-y build arm: introduce a DTS for Xen unprivileged virtual machines MAINTAINERS: add myself as Xen ARM maintainer xen/arm: compile netback xen/arm: compile blkfront and blkback xen/arm: implement alloc/free_xenballooned_pages with alloc_pages/kfree xen/arm: receive Xen events on ARM xen/arm: initialize grant_table on ARM xen/arm: get privilege status xen/arm: introduce CONFIG_XEN on ARM xen: do not compile manage, balloon, pci, acpi, pcpu and cpu_hotplug on ARM xen/arm: Introduce xen_ulong_t for unsigned long xen/arm: Xen detection and shared_info page mapping docs: Xen ARM DT bindings xen/arm: empty implementation of grant_table arch specific functions xen/arm: sync_bitops xen/arm: page.h definitions xen/arm: hypercalls ...
2012-10-04xen pv-on-hvm: add pfn_is_ram helper for kdumpOlaf Hering
Register pfn_is_ram helper speed up reading /proc/vmcore in the kdump kernel. See commit message of 997c136f518c ("fs/proc/vmcore.c: add hook to read_from_oldmem() to check for non-ram pages") for details. It makes use of a new hvmop HVMOP_get_mem_type which was introduced in xen 4.2 (23298:26413986e6e0) and backported to 4.1.1. The new function is currently only enabled for reading /proc/vmcore. Later it will be used also for the kexec kernel. Since that requires more changes in the generic kernel make it static for the time being. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-10-03Merge tag 'uapi-prep-20121002' of ↵Linus Torvalds
git://git.infradead.org/users/dhowells/linux-headers Pull preparatory patches for user API disintegration from David Howells: "The patches herein prepare for the extraction of the Userspace API bits from the various header files named in the Kbuild files. New subdirectories are created under either include/uapi/ or arch/x/include/uapi/ that correspond to the subdirectory containing that file under include/ or arch/x/include/. The new subdirs under the uapi/ directory are populated with Kbuild files that mostly do nothing at this time. Further patches will disintegrate the headers in each original directory and fill in the Kbuild files as they do it. These patches also: (1) fix up #inclusions of "foo.h" rather than <foo.h>. (2) Remove some redundant #includes from the DRM code. (3) Make the kernel build infrastructure handle Kbuild files both in the old places and the new UAPI place that both specify headers to be exported. (4) Fix some kernel tools that #include kernel headers during their build. I have compile tested this with allyesconfig against x86_64, allmodconfig against i386 and a scattering of additional defconfigs of other arches. Prepared for main script Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Michael Kerrisk <mtk.manpages@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Dave Jones <davej@redhat.com> Acked-by: H. Peter Anvin <hpa@zytor.com>" * tag 'uapi-prep-20121002' of git://git.infradead.org/users/dhowells/linux-headers: UAPI: Plumb the UAPI Kbuilds into the user header installation and checking UAPI: x86: Differentiate the generated UAPI and internal headers UAPI: Remove the objhdr-y export list UAPI: Move linux/version.h UAPI: Set up uapi/asm/Kbuild.asm UAPI: x86: Fix insn_sanity build failure after UAPI split UAPI: x86: Fix the test_get_len tool UAPI: (Scripted) Set up UAPI Kbuild files UAPI: Partition the header include path sets and add uapi/ header directories UAPI: (Scripted) Convert #include "..." to #include <path/...> in kernel system headers UAPI: (Scripted) Convert #include "..." to #include <path/...> in drivers/gpu/ UAPI: (Scripted) Remove redundant DRM UAPI header #inclusions from drivers/gpu/. UAPI: Refer to the DRM UAPI headers with <...> and from certain headers only
2012-10-02Merge tag 'stable/for-linus-3.7-x86-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen update from Konrad Rzeszutek Wilk: "Features: - When hotplugging PCI devices in a PV guest we can allocate Xen-SWIOTLB later. - Cleanup Xen SWIOTLB. - Support pages out grants from HVM domains in the backends. - Support wild cards in xen-pciback.hide=(BDF) arguments. - Update grant status updates with upstream hypervisor. - Boot PV guests with more than 128GB. - Cleanup Xen MMU code/add comments. - Obtain XENVERS using a preferred method. - Lay out generic changes to support Xen ARM. - Allow privcmd ioctl for HVM (used to do only PV). - Do v2 of mmap_batch for privcmd ioctls. - If hypervisor saves the LED keyboard light - we will now instruct the kernel about its state. Fixes: - More fixes to Xen PCI backend for various calls/FLR/etc. - With more than 4GB in a 64-bit PV guest disable native SWIOTLB. - Fix up smatch warnings. - Fix up various return values in privmcmd and mm." * tag 'stable/for-linus-3.7-x86-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: (48 commits) xen/pciback: Restore the PCI config space after an FLR. xen-pciback: properly clean up after calling pcistub_device_find() xen/vga: add the xen EFI video mode support xen/x86: retrieve keyboard shift status flags from hypervisor. xen/gndev: Xen backend support for paged out grant targets V4. xen-pciback: support wild cards in slot specifications xen/swiotlb: Fix compile warnings when using plain integer instead of NULL pointer. xen/swiotlb: Remove functions not needed anymore. xen/pcifront: Use Xen-SWIOTLB when initting if required. xen/swiotlb: For early initialization, return zero on success. xen/swiotlb: Use the swiotlb_late_init_with_tbl to init Xen-SWIOTLB late when PV PCI is used. xen/swiotlb: Move the error strings to its own function. xen/swiotlb: Move the nr_tbl determination in its own function. xen/arm: compile and run xenbus xen: resynchronise grant table status codes with upstream xen/privcmd: return -EFAULT on error xen/privcmd: Fix mmap batch ioctl error status copy back. xen/privcmd: add PRIVCMD_MMAPBATCH_V2 ioctl xen/mm: return more precise error from xen_remap_domain_range() xen/mmu: If the revector fails, don't attempt to revector anything else. ...
2012-10-02UAPI: (Scripted) Convert #include "..." to #include <path/...> in kernel ↵David Howells
system headers Convert #include "..." to #include <path/...> in kernel system headers. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Dave Jones <davej@redhat.com>
2012-09-26Merge branch 'xenarm-for-linus' of ↵Konrad Rzeszutek Wilk
git://xenbits.xen.org/people/sstabellini/linux-pvhvm into stable/for-linus-3.7 * 'xenarm-for-linus' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm: arm: introduce a DTS for Xen unprivileged virtual machines MAINTAINERS: add myself as Xen ARM maintainer xen/arm: compile netback xen/arm: compile blkfront and blkback xen/arm: implement alloc/free_xenballooned_pages with alloc_pages/kfree xen/arm: receive Xen events on ARM xen/arm: initialize grant_table on ARM xen/arm: get privilege status xen/arm: introduce CONFIG_XEN on ARM xen: do not compile manage, balloon, pci, acpi, pcpu and cpu_hotplug on ARM xen/arm: Introduce xen_ulong_t for unsigned long xen/arm: Xen detection and shared_info page mapping docs: Xen ARM DT bindings xen/arm: empty implementation of grant_table arch specific functions xen/arm: sync_bitops xen/arm: page.h definitions xen/arm: hypercalls arm: initial Xen support Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-09-24xen/vga: add the xen EFI video mode supportJan Beulich
In order to add xen EFI frambebuffer video support, it is required to add xen-efi's new video type (XEN_VGATYPE_EFI_LFB) case and handle it in the function xen_init_vga and set the video type to VIDEO_TYPE_EFI to enable efi video mode. The original patch from which this was broken out from: http://marc.info/?i=4E099AA6020000780004A4C6@nat28.tlf.novell.com Signed-off-by: Jan Beulich <JBeulich@novell.com> Signed-off-by: Tang Liang <liang.tang@oracle.com> [v2: The original author is Jan Beulich and Liang Tang ported it to upstream] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-09-24xen/x86: retrieve keyboard shift status flags from hypervisor.Konrad Rzeszutek Wilk
The xen c/s 25873 allows the hypervisor to retrieve the NUMLOCK flag. With this patch, the Linux kernel can get the state according to the data in the BIOS. Acked-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-09-18USB EHCI/Xen: propagate controller reset information to hypervisorJan Beulich
Just like for the in-tree early console debug port driver, the hypervisor - when using a debug port based console - also needs to be told about controller resets, so it can suppress using and then re-initialize the debug port accordingly. Other than the in-tree driver, the hypervisor driver actually cares about doing this only for the device where the debug is port actually in use, i.e. it needs to be told the coordinates of the device being reset (quite obviously, leveraging the addition done for that would likely benefit the in-tree driver too). Signed-off-by: Jan Beulich <jbeulich@suse.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14xen: resynchronise grant table status codes with upstreamIan Campbell
Adds GNTST_address_too_big and GNTST_eagain. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-09-12Merge branch 'x86/platform' of ↵Konrad Rzeszutek Wilk
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into stable/for-linus-3.7 * 'x86/platform' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (9690 commits) x86: Document x86_init.paging.pagetable_init() x86: xen: Cleanup and remove x86_init.paging.pagetable_setup_done() x86: Move paging_init() call to x86_init.paging.pagetable_init() x86: Rename pagetable_setup_start() to pagetable_init() x86: Remove base argument from x86_init.paging.pagetable_setup_start Linux 3.6-rc5 HID: tpkbd: work even if the new Lenovo Keyboard driver is not configured Remove user-triggerable BUG from mpol_to_str xen/pciback: Fix proper FLR steps. uml: fix compile error in deliver_alarm() dj: memory scribble in logi_dj Fix order of arguments to compat_put_time[spec|val] xen: Use correct masking in xen_swiotlb_alloc_coherent. xen: fix logical error in tlb flushing xen/p2m: Fix one-off error in checking the P2M tree directory. powerpc: Don't use __put_user() in patch_instruction powerpc: Make sure IPI handlers see data written by IPI senders powerpc: Restore correct DSCR in context switch powerpc: Fix DSCR inheritance in copy_thread() powerpc: Keep thread.dscr and thread.dscr_inherit in sync ...
2012-08-23xen: Introduce xen_pfn_t for pfn and mfn typesStefano Stabellini
All the original Xen headers have xen_pfn_t as mfn and pfn type, however when they have been imported in Linux, xen_pfn_t has been replaced with unsigned long. That might work for x86 and ia64 but it does not for arm. Bring back xen_pfn_t and let each architecture define xen_pfn_t as they see fit. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-08-23xen/sysfs: Use XENVER_guest_handle to query UUIDDaniel De Graaf
This hypercall has been present since Xen 3.1, and is the preferred method for a domain to obtain its UUID. Fall back to the xenstore method if using an older version of Xen (which returns -ENOSYS). Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-08-21xen: missing includesStefano Stabellini
Changes in v2: - remove pvclock hack; - remove include linux/types.h from xen/interface/xen.h. v3: - Compile under IA64 Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-08-21xen: update xen_add_to_physmap interfaceStefano Stabellini
Update struct xen_add_to_physmap to be in sync with Xen's version of the structure. The size field was introduced by: changeset: 24164:707d27fe03e7 user: Jean Guyader <jean.guyader@eu.citrix.com> date: Fri Nov 18 13:42:08 2011 +0000 summary: mm: New XENMEM space, XENMAPSPACE_gmfn_range According to the comment: "This new field .size is located in the 16 bits padding between .domid and .space in struct xen_add_to_physmap to stay compatible with older versions." Changes in v2: - remove erroneous comment in the commit message. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-08-08xen/arm: compile blkfront and blkbackStefano Stabellini
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-08-08xen/arm: get privilege statusStefano Stabellini
Use Xen features to figure out if we are privileged. XENFEAT_dom0 was introduced by 23735 in xen-unstable.hg. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-09-14xen/arm: Introduce xen_ulong_t for unsigned longStefano Stabellini
All the original Xen headers have xen_ulong_t as unsigned long type, however when they have been imported in Linux, xen_ulong_t has been replaced with unsigned long. That might work for x86 and ia64 but it does not for arm. Bring back xen_ulong_t and let each architecture define xen_ulong_t as they see fit. Also explicitly size pointers (__DEFINE_GUEST_HANDLE) to 64 bit. Changes in v3: - remove the incorrect changes to multicall_entry; - remove the change to apic_physbase. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-07-19xen/pv-on-hvm kexec: shutdown watches from old kernelOlaf Hering
Add xs_reset_watches function to shutdown watches from old kernel after kexec boot. The old kernel does not unregister all watches in the shutdown path. They are still active, the double registration can not be detected by the new kernel. When the watches fire, unexpected events will arrive and the xenwatch thread will crash (jumps to NULL). An orderly reboot of a hvm guest will destroy the entire guest with all its resources (including the watches) before it is rebuilt from scratch, so the missing unregister is not an issue in that case. With this change the xenstored is instructed to wipe all active watches for the guest. However, a patch for xenstored is required so that it accepts the XS_RESET_WATCHES request from a client (see changeset 23839:42a45baf037d in xen-unstable.hg). Without the patch for xenstored the registration of watches will fail and some features of a PVonHVM guest are not available. The guest is still able to boot, but repeated kexec boots will fail. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-07-19xen/pcpu: Xen physical cpus online/offline sys interfaceLiu, Jinsong
This patch provide Xen physical cpus online/offline sys interface. User can use it for their own purpose, like power saving: by offlining some cpus when light workload it save power greatly. Its basic workflow is, user online/offline cpu via sys interface, then hypercall xen to implement, after done xen inject virq back to dom0, and then dom0 sync cpu status. Signed-off-by: Jiang, Yunhong <yunhong.jiang@intel.com> Signed-off-by: Liu, Jinsong <jinsong.liu@intel.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-07-19xen/mce: Add mcelog support for Xen platformLiu, Jinsong
When MCA error occurs, it would be handled by Xen hypervisor first, and then the error information would be sent to initial domain for logging. This patch gets error information from Xen hypervisor and convert Xen format error into Linux format mcelog. This logic is basically self-contained, not touching other kernel components. By using tools like mcelog tool users could read specific error information, like what they did under native Linux. To test follow directions outlined in Documentation/acpi/apei/einj.txt Acked-and-tested-by: Borislav Petkov <borislav.petkov@amd.com> Signed-off-by: Ke, Liping <liping.ke@intel.com> Signed-off-by: Jiang, Yunhong <yunhong.jiang@intel.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Liu, Jinsong <jinsong.liu@intel.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-03-24Merge tag 'stable/for-linus-3.4-tag-two' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull more xen updates from Konrad Rzeszutek Wilk: "One tiny feature that accidentally got lost in the initial git pull: * Add fast-EOI acking of interrupts (clear a bit instead of hypercall) And bug-fixes: * Fix CPU bring-up code missing a call to notify other subsystems. * Fix reading /sys/hypervisor even if PVonHVM drivers are not loaded. * In Xen ACPI processor driver: remove too verbose WARN messages, fix up the Kconfig dependency to be a module by default, and add dependency on CPU_FREQ. * Disable CPU frequency drivers from loading when booting under Xen (as we want the Xen ACPI processor to be used instead). * Cleanups in tmem code." * tag 'stable/for-linus-3.4-tag-two' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/acpi: Fix Kconfig dependency on CPU_FREQ xen: initialize platform-pci even if xen_emul_unplug=never xen/smp: Fix bringup bug in AP code. xen/acpi: Remove the WARN's as they just create noise. xen/tmem: cleanup xen: support pirq_eoi_map xen/acpi-processor: Do not depend on CPU frequency scaling drivers. xen/cpufreq: Disable the cpu frequency scaling drivers from loading. provide disable_cpufreq() function to disable the API.
2012-03-22Merge tag 'stable/for-linus-3.4-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull xen updates from Konrad Rzeszutek Wilk: "which has three neat features: - PV multiconsole support, so that there can be hvc1, hvc2, etc; This can be used in HVM and in PV mode. - P-state and C-state power management driver that uploads said power management data to the hypervisor. It also inhibits cpufreq scaling drivers to load so that only the hypervisor can make power management decisions - fixing a weird perf bug. There is one thing in the Kconfig that you won't like: "default y if (X86_ACPI_CPUFREQ = y || X86_POWERNOW_K8 = y)" (note, that it all depends on CONFIG_XEN which depends on CONFIG_PARAVIRT which by default is off). I've a fix to convert that boolean expression into "default m" which I am going to post after the cpufreq git pull - as the two patches to make this work depend on a fix in Dave Jones's tree. - Function Level Reset (FLR) support in the Xen PCI backend. Fixes: - Kconfig dependencies for Xen PV keyboard and video - Compile warnings and constify fixes - Change over to use percpu_xxx instead of this_cpu_xxx" Fix up trivial conflicts in drivers/tty/hvc/hvc_xen.c due to changes to a removed commit. * tag 'stable/for-linus-3.4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen kconfig: relax INPUT_XEN_KBDDEV_FRONTEND deps xen/acpi-processor: C and P-state driver that uploads said data to hypervisor. xen: constify all instances of "struct attribute_group" xen/xenbus: ignore console/0 hvc_xen: introduce HVC_XEN_FRONTEND hvc_xen: implement multiconsole support hvc_xen: support PV on HVM consoles xenbus: don't free other end details too early xen/enlighten: Expose MWAIT and MWAIT_LEAF if hypervisor OKs it. xen/setup/pm/acpi: Remove the call to boot_option_idle_override. xenbus: address compiler warnings xen: use this_cpu_xxx replace percpu_xxx funcs xen/pciback: Support pci_reset_function, aka FLR or D3 support. pci: Introduce __pci_reset_function_locked to be used when holding device_lock. xen: Utilize the restore_msi_irqs hook.
2012-03-20xen: support pirq_eoi_mapStefano Stabellini
The pirq_eoi_map is a bitmap offered by Xen to check which pirqs need to be EOI'd without having to issue an hypercall every time. We use PHYSDEVOP_pirq_eoi_gmfn_v2 to map the bitmap, then if we succeed we use pirq_eoi_map to check whether pirqs need eoi. Changes in v3: - explicitly use PHYSDEVOP_pirq_eoi_gmfn_v2 rather than PHYSDEVOP_pirq_eoi_gmfn; - introduce pirq_check_eoi_map, a function to check if a pirq needs an eoi using the map; -rename pirq_needs_eoi into pirq_needs_eoi_flag; - introduce a function pointer called pirq_needs_eoi that is going to be set to the right implementation depending on the availability of PHYSDEVOP_pirq_eoi_gmfn_v2. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-03-14xen/acpi-processor: C and P-state driver that uploads said data to hypervisor.Konrad Rzeszutek Wilk
This driver solves three problems: 1). Parse and upload ACPI0007 (or PROCESSOR_TYPE) information to the hypervisor - aka P-states (cpufreq data). 2). Upload the the Cx state information (cpuidle data). 3). Inhibit CPU frequency scaling drivers from loading. The reason for wanting to solve 1) and 2) is such that the Xen hypervisor is the only one that knows the CPU usage of different guests and can make the proper decision of when to put CPUs and packages in proper states. Unfortunately the hypervisor has no support to parse ACPI DSDT tables, hence it needs help from the initial domain to provide this information. The reason for 3) is that we do not want the initial domain to change P-states while the hypervisor is doing it as well - it causes rather some funny cases of P-states transitions. For this to work, the driver parses the Power Management data and uploads said information to the Xen hypervisor. It also calls acpi_processor_notify_smm() to inhibit the other CPU frequency scaling drivers from being loaded. Everything revolves around the 'struct acpi_processor' structure which gets updated during the bootup cycle in different stages. At the startup, when the ACPI parser starts, the C-state information is processed (processor_idle) and saved in said structure as 'power' element. Later on, the CPU frequency scaling driver (powernow-k8 or acpi_cpufreq), would call the the acpi_processor_* (processor_perflib functions) to parse P-states information and populate in the said structure the 'performance' element. Since we do not want the CPU frequency scaling drivers from loading we have to call the acpi_processor_* functions to parse the P-states and call "acpi_processor_notify_smm" to stop them from loading. There is also one oddity in this driver which is that under Xen, the physical online CPU count can be different from the virtual online CPU count. Meaning that the macros 'for_[online|possible]_cpu' would process only up to virtual online CPU count. We on the other hand want to process the full amount of physical CPUs. For that, the driver checks if the ACPI IDs count is different from the APIC ID count - which can happen if the user choose to use dom0_max_vcpu argument. In such a case a backup of the PM structure is used and uploaded to the hypervisor. [v1-v2: Initial RFC implementations that were posted] [v3: Changed the name to passthru suggested by Pasi Kärkkäinen <pasik@iki.fi>] [v4: Added vCPU != pCPU support - aka dom0_max_vcpus support] [v5: Cleaned up the driver, fix bug under Athlon XP] [v6: Changed the driver to a CPU frequency governor] [v7: Jan Beulich <jbeulich@suse.com> suggestion to make it a cpufreq scaling driver made me rework it as driver that inhibits cpufreq scaling driver] [v8: Per Jan's review comments, fixed up the driver] [v9: Allow to continue even if acpi_processor_preregister_perf.. fails] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-03-13hvc_xen: support PV on HVM consolesStefano Stabellini
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-03-10xen/enlighten: Expose MWAIT and MWAIT_LEAF if hypervisor OKs it.Konrad Rzeszutek Wilk
For the hypervisor to take advantage of the MWAIT support it needs to extract from the ACPI _CST the register address. But the hypervisor does not have the support to parse DSDT so it relies on the initial domain (dom0) to parse the ACPI Power Management information and push it up to the hypervisor. The pushing of the data is done by the processor_harveset_xen module which parses the information that the ACPI parser has graciously exposed in 'struct acpi_processor'. For the ACPI parser to also expose the Cx states for MWAIT, we need to expose the MWAIT capability (leaf 1). Furthermore we also need to expose the MWAIT_LEAF capability (leaf 5) for cstate.c to properly function. The hypervisor could expose these flags when it traps the XEN_EMULATE_PREFIX operations, but it can't do it since it needs to be backwards compatible. Instead we choose to use the native CPUID to figure out if the MWAIT capability exists and use the XEN_SET_PDC query hypercall to figure out if the hypervisor wants us to expose the MWAIT_LEAF capability or not. Note: The XEN_SET_PDC query was implemented in c/s 23783: "ACPI: add _PDC input override mechanism". With this in place, instead of C3 ACPI IOPORT 415 we get now C3:ACPI FFH INTEL MWAIT 0x20 Note: The cpu_idle which would be calling the mwait variants for idling never gets set b/c we set the default pm_idle to be the hypercall variant. Acked-by: Jan Beulich <JBeulich@suse.com> [v2: Fix missing header file include and #ifdef] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-01-15Merge branch 'for-3.3/drivers' of git://git.kernel.dk/linux-blockLinus Torvalds
* 'for-3.3/drivers' of git://git.kernel.dk/linux-block: mtip32xx: do rebuild monitoring asynchronously xen-blkfront: Use kcalloc instead of kzalloc to allocate array mtip32xx: uninitialized variable in mtip_quiesce_io() mtip32xx: updates based on feedback xen-blkback: convert hole punching to discard request on loop devices xen/blkback: Move processing of BLKIF_OP_DISCARD from dispatch_rw_block_io xen/blk[front|back]: Enhance discard support with secure erasing support. xen/blk[front|back]: Squash blkif_request_rw and blkif_request_discard together mtip32xx: update to new ->make_request() API mtip32xx: add module.h include to avoid conflict with moduleh tree mtip32xx: mark a few more items static mtip32xx: ensure that all local functions are static mtip32xx: cleanup compat ioctl handling mtip32xx: fix warnings/errors on 32-bit compiles block: Add driver for Micron RealSSD pcie flash cards
2012-01-12xen: Utilize the restore_msi_irqs hook.Tang Liang
to make a hypercall to restore the vectors in the MSI/MSI-X configuration space. Signed-off-by: Tang Liang <liang.tang@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-01-10Merge branch 'stable/for-linus-3.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/for-linus-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: (37 commits) xen/pciback: Expand the warning message to include domain id. xen/pciback: Fix "device has been assigned to X domain!" warning xen/pciback: Move the PCI_DEV_FLAGS_ASSIGNED ops to the "[un|]bind" xen/xenbus: don't reimplement kvasprintf via a fixed size buffer xenbus: maximum buffer size is XENSTORE_PAYLOAD_MAX xen/xenbus: Reject replies with payload > XENSTORE_PAYLOAD_MAX. Xen: consolidate and simplify struct xenbus_driver instantiation xen-gntalloc: introduce missing kfree xen/xenbus: Fix compile error - missing header for xen_initial_domain() xen/netback: Enable netback on HVM guests xen/grant-table: Support mappings required by blkback xenbus: Use grant-table wrapper functions xenbus: Support HVM backends xen/xenbus-frontend: Fix compile error with randconfig xen/xenbus-frontend: Make error message more clear xen/privcmd: Remove unused support for arch specific privcmp mmap xen: Add xenbus_backend device xen: Add xenbus device driver xen: Add privcmd device driver xen/gntalloc: fix reference counts on multi-page mappings ...
2012-01-04xen/xenbus: Reject replies with payload > XENSTORE_PAYLOAD_MAX.Ian Campbell
Haogang Chen found out that: There is a potential integer overflow in process_msg() that could result in cross-domain attack. body = kmalloc(msg->hdr.len + 1, GFP_NOIO | __GFP_HIGH); When a malicious guest passes 0xffffffff in msg->hdr.len, the subsequent call to xb_read() would write to a zero-length buffer. The other end of this connection is always the xenstore backend daemon so there is no guest (malicious or otherwise) which can do this. The xenstore daemon is a trusted component in the system. However this seem like a reasonable robustness improvement so we should have it. And Ian when read the API docs found that: The payload length (len field of the header) is limited to 4096 (XENSTORE_PAYLOAD_MAX) in both directions. If a client exceeds the limit, its xenstored connection will be immediately killed by xenstored, which is usually catastrophic from the client's point of view. Clients (particularly domains, which cannot just reconnect) should avoid this. so this patch checks against that instead. This also avoids a potential integer overflow pointed out by Haogang Chen. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Haogang Chen <haogangchen@gmail.com> CC: stable@kernel.org Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-12-19Revert "xen/pv-on-hvm kexec: add xs_reset_watches to shutdown watches from ↵Konrad Rzeszutek Wilk
old kernel" This reverts commit ddacf5ef684a655abe2bb50c4b2a5b72ae0d5e05. As when booting the kernel under Amazon EC2 as an HVM guest it ends up hanging during startup. Reverting this we loose the fix for kexec booting to the crash kernels. Fixes Canonical BZ #901305 (http://bugs.launchpad.net/bugs/901305) Tested-by: Alessandro Salvatori <sandr8@gmail.com> Reported-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Ian Campbell <Ian.Campbell@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>