summaryrefslogtreecommitdiffstats
path: root/include
AgeCommit message (Collapse)Author
2010-08-11virtio_9p.h: include linux/types.hRandy Dunlap
Add <linux/types.h> to <linux/virtio_9p.h> so that types are explicitly defined: linux/virtio_9p.h:15: found __[us]{8,16,32,64} type without #include <linux/types.h> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Eric Van Hensbergen <ericvh@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11scsi: use __uX types for headers exported to user spacePeter Korsgaard
Commit 9e4f5e29 ("FC Pass Thru support") exported a number of header files in include/scsi to user space, but didn't change the uX types to the userspace-compatible __uX types. Without that you'll get compile errors when including them - E.G.: include/scsi/scsi.h:145: error: expected specifier-qualifier-list before `u8' Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Cc: Boaz Harrosh <bharrosh@panasas.com> Cc: James Smart <james.smart@emulex.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11include/linux/fs.h: complete hexification of FMODE_* constantsAndrew Morton
One straggler which was missed due to merge ordering issues. Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Eric Paris <eparis@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11param: don't deref arg in __same_type() checksRusty Russell
gcc allows this when arg is a function, but sparse complains: drivers/char/ipmi/ipmi_watchdog.c:303:1: error: cannot dereference this type drivers/char/ipmi/ipmi_watchdog.c:307:1: error: cannot dereference this type drivers/char/ipmi/ipmi_watchdog.c:311:1: error: cannot dereference this type Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Tested-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-08-11param: add kerneldoc to moduleparam.hRusty Russell
Also reorders the macros with the most common ones at the top. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Reviewed-by: Takashi Iwai <tiwai@suse.de> Tested-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
2010-08-11param: locking for kernel parametersRusty Russell
There may be cases (most obviously, sysfs-writable charp parameters) where a module needs to prevent sysfs access to parameters. Rather than express this in terms of a big lock, the functions are expressed in terms of what they protect against. This is clearer, esp. if the implementation changes to a module-level or even param-level lock. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Reviewed-by: Takashi Iwai <tiwai@suse.de> Tested-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
2010-08-11param: make param sections const.Rusty Russell
Since this section can be read-only (they're in .rodata), they should always have been const. Minor flow-through various functions. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Tested-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
2010-08-11param: add a free hook to kernel_param_ops.Rusty Russell
This allows us to generalize the KPARAM_KMALLOCED flag, by calling a function on every parameter when a module is unloaded. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Reviewed-by: Takashi Iwai <tiwai@suse.de> Tested-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
2010-08-11param: use ops in struct kernel_param, rather than get and set fns directlyRusty Russell
This is more kernel-ish, saves some space, and also allows us to expand the ops without breaking all the callers who are happy for the new members to be NULL. The few places which defined their own param types are changed to the new scheme (more which crept in recently fixed in following patches). Since we're touching them anyway, we change get() and set() to take a const struct kernel_param (which they really are). This causes some harmless warnings until we fix them (in following patches). To reduce churn, module_param_call creates the ops struct so the callers don't have to change (and casts the functions to reduce warnings). The modern version which takes an ops struct is called module_param_cb. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Reviewed-by: Takashi Iwai <tiwai@suse.de> Tested-by: Phil Carmody <ext-phil.2.carmody@nokia.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Ville Syrjala <syrjala@sci.fi> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Alessandro Rubini <rubini@ipvvis.unipv.it> Cc: Michal Januszewski <spock@gentoo.org> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Neil Brown <neilb@suse.de> Cc: linux-kernel@vger.kernel.org Cc: linux-input@vger.kernel.org Cc: linux-fbdev-devel@lists.sourceforge.net Cc: linux-nfs@vger.kernel.org Cc: netdev@vger.kernel.org
2010-08-11ab8500-mfd: add regulator support to ab8500 mfd deviceSundar R Iyer
Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-By: Mattias Wallin <mattias.wallin@stericsson.com> Acked-By: Bengt JONSSON <bengt.g.jonsson@stericsson.com> Signed-off-by: Sundar R Iyer <sundar.iyer@stericsson.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-11drivers: regulator: add Maxim 8998 driverKyungmin Park
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> This patch adds voltage regulator driver for Maxim 8998 chip. This chip is used on Samsung Aquila and GONI boards and provides following functionalities: - 4 BUCK voltage converters, 17 LDO power regulators and 5 other power controllers - battery charger This patch adds basic driver for voltage regulators and MAX 8998 MFD core. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-11hwpoison: rename CONFIGNaoya Horiguchi
CONFIG_HUGETLBFS controls hugetlbfs interface code. OTOH, CONFIG_HUGETLB_PAGE controls hugepage management code. So we should use CONFIG_HUGETLB_PAGE here. Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2010-08-11HWPOISON, hugetlb: isolate corrupted hugepageNaoya Horiguchi
If error hugepage is not in-use, we can fully recovery from error by dequeuing it from freelist, so return RECOVERY. Otherwise whether or not we can recovery depends on user processes, so return DELAYED. Dependency: "HWPOISON, hugetlb: enable error handling path for hugepage" Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andrew Morton <akpm@linux-foundation.org> Acked-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2010-08-11hugetlb, rmap: add reverse mapping for hugepageNaoya Horiguchi
This patch adds reverse mapping feature for hugepage by introducing mapcount for shared/private-mapped hugepage and anon_vma for private-mapped hugepage. While hugepage is not currently swappable, reverse mapping can be useful for memory error handler. Without this patch, memory error handler cannot identify processes using the bad hugepage nor unmap it from them. That is: - for shared hugepage: we can collect processes using a hugepage through pagecache, but can not unmap the hugepage because of the lack of mapcount. - for privately mapped hugepage: we can neither collect processes nor unmap the hugepage. This patch solves these problems. This patch include the bug fix given by commit 23be7468e8, so reverts it. Dependency: "hugetlb: move definition of is_vm_hugetlb_page() to hugepage_inline.h" ChangeLog since May 24. - create hugetlb_inline.h and move is_vm_hugetlb_index() in it. - move functions setting up anon_vma for hugepage into mm/rmap.c. ChangeLog since May 13. - rebased to 2.6.34 - fix logic error (in case that private mapping and shared mapping coexist) - move is_vm_hugetlb_page() into include/linux/mm.h to use this function from linear_page_index() - define and use linear_hugepage_index() instead of compound_order() - use page_move_anon_rmap() in hugetlb_cow() - copy exclusive switch of __set_page_anon_rmap() into hugepage counterpart. - revert commit 24be7468 completely Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Acked-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2010-08-11hugetlb: move definition of is_vm_hugetlb_page() to hugepage_inline.hNaoya Horiguchi
is_vm_hugetlb_page() is a widely used inline function to insert hooks into hugetlb code. But we can't use it in pagemap.h because of circular dependency of the header files. This patch removes this limitation. Acked-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2010-08-11vfs: remove unused MNT_STRICTATIMEMiklos Szeredi
Commit d0adde574b8487ef30f69e2d08bba769e4be513f added MNT_STRICTATIME but it isn't actually used (MS_STRICTATIME clears MNT_RELATIME and MNT_NOATIME rather than setting any mount flag). Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-11vfs: show unreachable paths in getcwd and procMiklos Szeredi
Prepend "(unreachable)" to path strings if the path is not reachable from the current root. Two places updated are - the return string from getcwd() - and symlinks under /proc/$PID. Other uses of d_path() are left unchanged (we know that some old software crashes if /proc/mounts is changed). Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-11vfs: add helpers to get root and pwdMiklos Szeredi
Add three helpers that retrieve a refcounted copy of the root and cwd from the supplied fs_struct. get_fs_root() get_fs_pwd() get_fs_root_and_pwd() Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-11V7: Adjust sanity checks for some volumesLubomir Rintel
Newly mkfs-ed filesystems from Seventh Edition have last modification time set to zero, but are otherwise perfectly valid. Also, tighten up other sanity checks to filter out most filesystems with different bytesex than we're using. Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-10net: make netpoll_rx return bool for !CONFIG_NETPOLLJohn W. Linville
"netpoll: Use 'bool' for netpoll_rx() return type." missed the case when CONFIG_NETPOLL is disabled. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-10Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-08-10i2c.h: fix kernel-doc warningsRandy Dunlap
Fix kernel-doc warnings in linux/i2c.h: Warning(include/linux/i2c.h:176): No description found for parameter 'alert' Warning(include/linux/i2c.h:259): No description found for parameter 'of_node' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10Merge branch 'for-2.6.36' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-2.6.36' of git://git.kernel.dk/linux-2.6-block: (149 commits) block: make sure that REQ_* types are seen even with CONFIG_BLOCK=n xen-blkfront: fix missing out label blkdev: fix blkdev_issue_zeroout return value block: update request stacking methods to support discards block: fix missing export of blk_types.h writeback: fix bad _bh spinlock nesting drbd: revert "delay probes", feature is being re-implemented differently drbd: Initialize all members of sync_conf to their defaults [Bugz 315] drbd: Disable delay probes for the upcomming release writeback: cleanup bdi_register writeback: add new tracepoints writeback: remove unnecessary init_timer call writeback: optimize periodic bdi thread wakeups writeback: prevent unnecessary bdi threads wakeups writeback: move bdi threads exiting logic to the forker thread writeback: restructure bdi forker loop a little writeback: move last_active to bdi writeback: do not remove bdi from bdi_list writeback: simplify bdi code a little writeback: do not lose wake-ups in bdi threads ... Fixed up pretty trivial conflicts in drivers/block/virtio_blk.c and drivers/scsi/scsi_error.c as per Jens.
2010-08-10Merge branches 'master' and 'devel' into for-linusRussell King
Conflicts: arch/arm/Kconfig arch/arm/mm/Kconfig
2010-08-10Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (94 commits) V4L/DVB: tvp7002: fix write to H-PLL Feedback Divider LSB register V4L/DVB: dvb: siano: free spinlock before schedule() V4L/DVB: media: video: pvrusb2: remove custom hex_to_bin() V4L/DVB: drivers: usbvideo: remove custom implementation of hex_to_bin() V4L/DVB: Report supported QAM modes on bt8xx V4L/DVB: media: ir-keytable: null dereference in debug code V4L/DVB: ivtv: convert to the new control framework V4L/DVB: ivtv: convert gpio subdev to new control framework V4L/DVB: wm8739: convert to the new control framework V4L/DVB: cs53l32a: convert to new control framework V4L/DVB: wm8775: convert to the new control framework V4L/DVB: cx2341x: convert to the control framework V4L/DVB: cx25840: convert to the new control framework V4L/DVB: cx25840/ivtv: replace ugly priv control with s_config V4L/DVB: saa717x: convert to the new control framework V4L/DVB: msp3400: convert to the new control framework V4L/DVB: saa7115: convert to the new control framework V4L/DVB: v4l2: hook up the new control framework into the core framework V4L/DVB: Documentation: add v4l2-controls.txt documenting the new controls API V4L/DVB: v4l2-ctrls: Whitespace cleanups ...
2010-08-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: watchdog: hpwdt: formatting of pointers in printk() watchdog: Adding support for ARM Primecell SP805 Watchdog watchdog: f71808e_wdt: new watchdog driver for Fintek F71808E and F71882FG watchdog: sch311x_wdt.c: set parent before registeriing the misc device in probe() function watchdog: wdt_pci.c: move ids to pci_ids.h watchdog: s3c2410_wdt - Fix removing of platform device
2010-08-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: xpad - add USB-ID for PL-3601 Xbox 360 pad Input: cy8ctmg100_ts - signedness bug Input: elantech - report position also with 3 fingers Input: elantech - discard the first 2 positions on some firmwares Input: adxl34x - do not mark device as disabled on startup Input: gpio_keys - add hooks to enable/disable device Input: evdev - rearrange ioctl handling Input: dynamically allocate ABS information Input: switch to input_abs_*() access functions Input: add static inline accessors for ABS properties
2010-08-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (148 commits) USB: serial: fix stalled writes USB: remove fake "address-of" expressions USB: fix thread-unsafe anchor utiliy routines USB: usbtest: support test device with only one iso-in or iso-out endpoint USB: usbtest: avoid to free coherent buffer in atomic context USB: xhci: Set DMA mask for host. USB: xhci: Don't flush doorbell writes. USB: xhci: Reduce reads and writes of interrupter registers. USB: xhci: Make xhci_set_hc_event_deq() static. USB: xhci: Minimize HW event ring dequeue pointer writes. USB: xhci: Make xhci_handle_event() static. USB: xhci: Remove unnecessary reads of IRQ_PENDING register. USB: xhci: Performance - move xhci_work() into xhci_irq() USB: xhci: Performance - move interrupt handlers into xhci-ring.c USB: xhci: Performance - move functions that find ep ring. USB:: fix linux/usb.h kernel-doc warnings USB: add USB serial ssu100 driver USB: usb-storage: implement autosuspend USB: ehci: fix remove of ehci debugfs dir USB: Add USB 2.0 to ssb ohci driver ...
2010-08-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (68 commits) U6715 16550A serial driver support Char: nozomi, set tty->driver_data appropriately Char: nozomi, fix tty->count counting serial: max3107: Fix gpiolib support hsu: call PCI pm hooks in suspend/resume function hsu: some code cleanup hsu: add a periodic timer to check dma rx channel hsu: driver for Medfield High Speed UART device mxser: remove unnesesary NULL check serial: add support for OX16PCI958 card serial: 68328serial.c: remove dead (ALMA_ANS | DRAGONIXVZ | M68EZ328ADS) timbuart: use __devinit and __devexit macros for probe and remove serial: MMIO32 support for 8250_early.c serial: mcf: don't take spinlocks in already protected functions serial: general fixes in the serial_rs485 structure serial: fix missing bit coverage of ASYNC_FLAGS serial: "altera_uart: simplify altera_uart_console_putc()" checkpatch fixes serial: crisv10: formatting of pointers in printk() vt: Fix warning: statement with no effect due to vt_kern.h tty_io: remove casts from void* ...
2010-08-10USB:: fix linux/usb.h kernel-doc warningsRandy Dunlap
Fix kernel-doc warnings in linux/usb.h: Warning(include/linux/usb.h:185): No description found for parameter 'resetting_device' Warning(include/linux/usb.h:1212): No description found for parameter 'stream_id' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB delay init quirk for logitech Harmony 700-series devicesPhil Dibowitz
The Logitech Harmony 700 series needs an extra delay during initialization. This patch adds a USB quirk which enables such a delay and adds the device to the quirks list. Signed-off-by: Phil Dibowitz <phil@ipom.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: otg/ulpi: extend the generic ulpi driver.Igor Grinberg
1) Introduce ulpi specific flags for control of the ulpi phy 2) Extend the generic ulpi driver with support for Function and Interface control of upli phy 3) Update the platforms using the generic ulpi driver with new ulpi flags 4) Remove the otg control flags not in use Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: ulpi: fix compilation warningAjay Kumar Gupta
Fixes below compilation warning from ulpi.h include/linux/usb/ulpi.h:145: warning: 'struct otg_io_access_ops' declared inside parameter list include/linux/usb/ulpi.h:145: warning: its scope is only this definition or declaration, which is probably not what you want Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: fix race between root-hub wakeup & controller suspendAlan Stern
This patch (as1395) adds code to hcd_pci_suspend() for handling wakeup races. This is another general race pattern, similar to the "open vs. unregister" race we're all familiar with. Here, the race is between suspending a device and receiving a wakeup request from one of the device's suspended children. In particular, if a root-hub wakeup is requested at about the same time as the corresponding USB controller is suspended, and if the controller is enabled for wakeup, then the controller should either fail to suspend or else wake right back up again. During system sleep this won't happen very much, especially since host controllers generally aren't enabled for wakeup during sleep. However it is definitely an issue for runtime PM. Something like this will be needed to prevent the controller from autosuspending while waiting for a root-hub resume to take place. (That is, in fact, the common case, for which there is an extra test.) Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: add do_wakeup parameter for PCI HCD suspendAlan Stern
This patch (as1385) adds a "do_wakeup" parameter to the pci_suspend method used by PCI-based host controller drivers. ehci-hcd in particular needs to know whether or not to enable wakeup when suspending a controller. Although that information is currently available through device_may_wakeup(), when support is added for runtime suspend this will no longer be true. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: convert usb_hcd bitfields into atomic flagsAlan Stern
This patch (as1393) converts several of the single-bit fields in struct usb_hcd to atomic flags. This is for safety's sake; not all CPUs can update bitfield values atomically, and these flags are used in multiple contexts. The flag fields that are set only during registration or removal can remain as they are, since non-atomic accesses at those times will not cause any problems. (Strictly speaking, the authorized_default flag should become atomic as well. I didn't bother with it because it gets changed only via sysfs. It can be done later, if anyone wants.) Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: gadget: composite: added disconnect callbackMichal Nazarewicz
Added a disconnect() callback to composite devices which is called by composite glue when its disconnect callback is called by gadget. Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: gadget: composite: usb_string_ids_*() functions addedMichal Nazarewicz
usb_string_ids_tab() and usb_string_ids_n() functions added to the composite framework. The first accepts an array of usb_string object and for each registeres a string id and the second registeres a given number of ids and returns the first. This may simplify string ids registration since gadgets and composite functions won't have to call usb_string_id() several times and each time check for errer status -- all this will be done with a single call. Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: gadget: f_fs: functionfs_add() renamed to functionfs_bind_config()Michal Nazarewicz
FunctionFS had a bit unique name for function used to add it to USB configuration. Renamed as to match naming convention of other functions. Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB-BKL: Convert usb_driver ioctl to unlocked_ioctlAndi Kleen
And audit all the users. None needed the BKL. That was easy because there was only very few around. Tested with allmodconfig build on x86-64 Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Arnd Bergmann <arnd@arndb.de> From: Andi Kleen <ak@linux.intel.com>
2010-08-10USB: EHCI: EHCI 1.1 addendum: Basic LPM feature supportAlek Du
With this patch, the LPM capable EHCI host controller can put device into L1 sleep state which is a mode that can enter/exit quickly, and reduce power consumption. Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com> Signed-off-by: Alek Du <alek.du@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: EHCI: EHCI 1.1 addendum: preparationAlek Du
EHCI 1.1 addendum introduced several energy efficiency extensions for EHCI USB host controllers: 1. LPM (link power management) 2. Per-port change 3. Shorter periodic frame list 4. Hardware prefetching This patch is intended to define the HW bits and debug interface for EHCI 1.1 addendum. The LPM and Per-port change patches will be sent out after this patch. Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com> Signed-off-by: Alek Du <alek.du@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: otg.h: Fix the mixup in parameters order.Igor Grinberg
otg_io_write() function does not follow the declaration of struct otg_io_access_ops. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: don't stop root-hub status polls too soonAlan Stern
This patch (as1390) fixes a problem that crops up when a UHCI host controller is unbound from uhci-hcd while there are still some active URBs. The URBs have to be unlinked when the root hub is unregistered, and uhci-hcd relies upon root-hub status polls as part of its unlinking procedure. But usb_hcd_poll_rh_status() won't make those status calls if hcd->rh_registered is clear, and the flag is cleared _before_ the unregistration takes place. Since hcd->rh_registered is used for other things and needs to be cleared early, the solution is to add a new flag (rh_pollable) and use it instead. It gets cleared _after_ the root hub is unregistered. Now that the status polls don't end too soon, we have to make sure they also don't occur too late -- after the root hub's usb_device structure or the HCD's private structures are deallocated. Therefore the patch adds usb_get_device() and usb_put_device() calls to protect the root hub structure, and it adds an extra del_timer_sync() to prevent the root-hub timer from causing an unexpected status poll. This additional complexity would not be needed if the HCD framework had provided separate stop() and release() callbacks instead of just stop(). This lack could be fixed at some future time (although it would require changes to every host controller driver); when that happens this patch won't be needed any more. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10Merge branch 'bkl/ioctl' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing * 'bkl/ioctl' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing: staging: Pushdown bkl to easycap ioctl handlers autofs/autofs4: Move compat_ioctl handling into fs v4l: Convert v4l2-dev to unlocked_ioctl ia64/perfmon: Convert to unlocked_ioctl sunrpc: Remove duplicated #include ncpfs: Remove duplicated #include
2010-08-10U6715 16550A serial driver supportPhilippe Langlais
UART Features extract from STEricsson U6715 data-sheet (arm926 SoC for mobile phone): * Fully compatible with industry standard 16C550 and 16C450 from various manufacturers * RX and TX 64 byte FIFO reduces CPU interrupts * Full double buffering * Modem control signals include CTS, RTS, (and DSR, DTR on UART1 only) * Automatic baud rate selection * Manual or automatic RTS/CTS smart hardware flow control * Programmable serial characteristics: – Baud rate generation (50 to 3.25M baud) – 5, 6, 7 or 8-bit characters – Even, odd or no-parity bit generation and detection – 1, 1.5 or 2 stop bit generation * Independent control of transmit, receive, line status, data set interrupts and FIFOs * Full status-reporting capabilities * Separate DMA signaling for RX and TX * Timed interrupt to spread receive interrupt on known duration * DMA time-out interrupt to allow detection of end of reception * Carkit pulse coding and decoding compliant with USB carkit control interface [40] In 16550A auto-configuration, if the fifo size is 64 then it's an U6 16550A port Add set_termios hook & export serial8250_do_set_termios to change uart clock following baudrate Signed-off-by: Philippe Langlais <philippe.langlais@stericsson.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10hsu: driver for Medfield High Speed UART deviceFeng Tang
This is a PCI & UART driver, which suppors both PIO and DMA mode UART operation. It has 3 identical UART ports and one internal DMA controller. Current FW will export 4 pci devices for hsu: 3 uart ports and 1 dma controller, each has one IRQ line. And we need to discuss the device model, one PCI device covering whole HSU should be a better model, but there is a problem of how to export the 4 IRQs info Current driver set the highest baud rate to 2746800bps, which is easy to scale down to 115200/230400.... To suport higher baud rate, we need add special process, change DLAB/DLH/PS/DIV/MUL registers all together. 921600 is the highest baud rate that has been tested with Bluetooth modem connected to HSU port 0. Will test more when there is right BT firmware. Current version contains several work around for A0's Silicon bugs Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10serial: general fixes in the serial_rs485 structureClaudio Scordino
Fix several issues related to the RS485 interface: - It adds the flag SER_RS485_RTS_BEFORE_SEND that was missing from the serial_rs485 structure (even if "delay_rts_before_send" was existing) - It adds a further "delay_rts_after_send" field for those drivers that can have a delay after send (e.g., atmel_serial) - It fixes the usage of the structure in the atmel_serial driver (where "delay_rts_before_send" should be used instead of "delay_rts_after_send"). Signed-off-by: Claudio Scordino <claudio@evidence.eu.com> Signed-off-by: Bernhard Roth <br@pwrnet.de> Cc: Philippe De Muyter <phdm@macqel.be> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10serial: fix missing bit coverage of ASYNC_FLAGSJohn Villalovos
It seems that currently ASYNC_FLAGS is one bit short of covering all the bits of the ASYNC user flags. In particular it does not cover the ASYNC_AUTOPROBE bit. ASYNCB_LAST_USER and ASYNCB_AUTOPROBE are both equal to 15. Therefore: ASYNC_AUTOPROBE = 1000 0000 0000 0000 ASYNC_FLAGS = 0111 1111 1111 1111 So ASYNC_FLAGS is not covering the ASYNC_AUTOPROBE bit. This patch fixes the issue and with the patch the values will be: ASYNC_AUTOPROBE = 1000 0000 0000 0000 ASYNC_FLAGS = 1111 1111 1111 1111 As a side note, doing a "git grep" I didn't find any use of ASYNC_AUTOPROBE or ASYNCB_AUTOPROBE in the kernel, besides this include file. Signed-off-by: John Villalovos <john.l.villalovos@intel.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10vt: Fix warning: statement with no effect due to vt_kern.hKevin Winchester
Using: gcc (GCC) 4.5.0 20100610 (prerelease) with CONFIG_CONSOLE_TRANSLATIONS=n, the following warnings are seen: drivers/char/vt_ioctl.c: In function ‘vt_ioctl’: drivers/char/vt_ioctl.c:1309:4: warning: statement with no effect drivers/char/vt.c: In function ‘vc_allocate’: drivers/char/vt.c:774:3: warning: statement with no effect drivers/video/console/vgacon.c: In function ‘vgacon_init’: drivers/video/console/vgacon.c:587:3: warning: statement with no effect drivers/video/console/vgacon.c: In function ‘vgacon_deinit’: drivers/video/console/vgacon.c:606:2: warning: statement with no effect drivers/video/console/fbcon.c: In function ‘fbcon_init’: drivers/video/console/fbcon.c:1087:3: warning: statement with no effect drivers/video/console/fbcon.c:1089:3: warning: statement with no effect drivers/video/console/fbcon.c: In function ‘fbcon_set_disp’: drivers/video/console/fbcon.c:1369:3: warning: statement with no effect drivers/video/console/fbcon.c:1371:3: warning: statement with no effect This is because several functions in include/linux/vt_kern.h are defined to (0). Convert them to static inline functions to silence the warnings and gain a bit of type safety. Signed-off-by: Kevin Winchester <kjwinchester@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>