summaryrefslogtreecommitdiffstats
path: root/include
AgeCommit message (Collapse)Author
2012-04-15net: cleanup unsigned to unsigned intEric Dumazet
Use of "unsigned int" is preferred to bare "unsigned" in net tree. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15virtio-net: send gratuitous packets when neededJason Wang
As hypervior does not have the knowledge of guest network configuration, it's better to ask guest to send gratuitous packets when needed. This patch implements VIRTIO_NET_F_GUEST_ANNOUNCE feature: hypervisor would notice the guest when it thinks it's time for guest to announce the link presnece. Guest tests VIRTIO_NET_S_ANNOUNCE bit during config change interrupt and woule send gratuitous packets through netif_notify_peers() and ack the notification through ctrl vq. We need to make sure the atomicy of read and ack in guest otherwise we may ack more times than being notified. This is done through handling the whole config change interrupt in an non-reentrant workqueue. Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-14tcp: bind() use stronger condition for bind_conflictAlex Copot
We must try harder to get unique (addr, port) pairs when doing port autoselection for sockets with SO_REUSEADDR option set. We achieve this by adding a relaxation parameter to inet_csk_bind_conflict. When 'relax' parameter is off we return a conflict whenever the current searched pair (addr, port) is not unique. This tries to address the problems reported in patch: 8d238b25b1ec22a73b1c2206f111df2faaff8285 Revert "tcp: bind() fix when many ports are bound" Tests where ran for creating and binding(0) many sockets on 100 IPs. The results are, on average: * 60000 sockets, 600 ports / IP: * 0.210 s, 620 (IP, port) duplicates without patch * 0.219 s, no duplicates with patch * 100000 sockets, 1000 ports / IP: * 0.371 s, 1720 duplicates without patch * 0.373 s, no duplicates with patch * 200000 sockets, 2000 ports / IP: * 0.766 s, 6900 duplicates without patch * 0.768 s, no duplicates with patch * 500000 sockets, 5000 ports / IP: * 2.227 s, 41500 duplicates without patch * 2.284 s, no duplicates with patch Signed-off-by: Alex Copot <alex.mihai.c@gmail.com> Signed-off-by: Daniel Baluta <dbaluta@ixiacom.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-14inet: makes syn_ack_timeout mandatoryEric Dumazet
There are two struct request_sock_ops providers, tcp and dccp. inet_csk_reqsk_queue_prune() can avoid testing syn_ack_timeout being NULL if we make it non NULL like syn_ack_timeout Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk> Cc: dccp@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-14tcp: RFC6298 supersedes RFC2988bisEric Dumazet
Updates some comments to track RFC6298 Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: H.K. Jerry Chu <hkchu@google.com> Cc: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-14tunnel: implement 64 bits statisticsstephen hemminger
Convert the per-cpu statistics kept for GRE, IPIP, and SIT tunnels to use 64 bit statistics. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-13rtnetlink: ops->get_tx_queue() cannot take a const 'tb'.David S. Miller
net/core/rtnetlink.c: In function ‘rtnl_create_link’: net/core/rtnetlink.c:1645:3: warning: passing argument 2 of ‘ops->get_tx_queues’ from incompatible pointer type [enabled by default] net/core/rtnetlink.c:1645:3: note: expected ‘const struct nlattr **’ but argument is of type ‘struct nlattr **’ Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-13neighbour: Make neigh_table_init_no_netlink() static.Hiroaki SHIMODA
neigh_table_init_no_netlink() is only used in net/core/neighbour.c file. Signed-off-by: Hiroaki SHIMODA <shimoda.hiroaki@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-13udp: intoduce udp_encap_needed static_keyEric Dumazet
Most machines dont use UDP encapsulation (L2TP) Adds a static_key so that udp_queue_rcv_skb() doesnt have to perform a test if L2TP never setup the encap_rcv on a socket. Idea of this patch came after Simon Horman proposal to add a hook on TCP as well. If static_key is not yet enabled, the fast path does a single JMP . When static_key is enabled, JMP destination is patched to reach the real encap_type/encap_rcv logic, possibly adding cache misses. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Simon Horman <horms@verge.net.au> Cc: dev@openvswitch.org Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-13rtnetlink: fix commentsstephen hemminger
Fix spelling and references in rtnetlink. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-13rtnetlink & bonding: change args got get_tx_queuesstephen hemminger
Change get_tx_queues, drop unsused arg/return value real_tx_queues, and use return by value (with error) rather than call by reference. Probably bonding should just change to LLTX and the whole get_tx_queues API could disappear! Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-13caif-hsi: robust frame aggregation for HSIDmitry Tarnyagin
Implement aggregation algorithm, combining more data into a single HSI transfer. 4 different traffic categories are supported: 1. TC_PRIO_CONTROL .. TC_PRIO_MAX (CTL) 2. TC_PRIO_INTERACTIVE (VO) 3. TC_PRIO_INTERACTIVE_BULK (VI) 4. TC_PRIO_BESTEFFORT, TC_PRIO_BULK, TC_PRIO_FILLER (BEBK) Signed-off-by: Dmitry Tarnyagin <dmitry.tarnyagin@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-13caif: set traffic class for caif packetsDmitry Tarnyagin
Set traffic class for CAIF packets, based on socket priority, CAIF protocol type, or type of message. Traffic class mapping for different packet types: - control: TC_PRIO_CONTROL; - flow control: TC_PRIO_CONTROL; - at: TC_PRIO_CONTROL; - rfm: TC_PRIO_INTERACTIVE_BULK; - other sockets: equals to socket's TC; - network data: no change. Signed-off-by: Dmitry Tarnyagin <dmitry.tarnyagin@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-12Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next
2012-04-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2012-04-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix bluetooth userland regression reported by Keith Packard, from Gustavo Padovan. 2) Revert ath9k PS idle change, from Sujith Manoharan. 3) Correct default TCP memory limits (again), from Eric Dumazet. 4) Fix tcp_rcv_rtt_update() accidental use of unscaled RTT, from Neal Cardwell. 5) We made a facility for layers like wireless to say how much tailroom they need in the SKB for link layer stuff such as wireless encryption etc., but TCP works hard to fill every SKB out to the end defeating this specification. This leads to every TCP packet getting reallocated by the wireless code in order to have the right amount of tailroom available. Fix TCP to only fill SKBs out to the real amount of data area it asked for during the allocation, this way it won't eat into the slack added for the device's tailroom needs. Reported by Marc Merlin and fixed by Eric Dumazet. 6) Leaks, endian bugs, and new device IDs in bluetooth from Santosh Nayak, João Paulo Rechi Vita, Cho, Yu-Chen, Andrei Emeltchenko, AceLan Kao, and Andrei Emeltchenko. 7) OOPS on tty_close fix in bluetooth's hci_ldisc from Johan Hovold. 8) netfilter erroneously scales TCP window twice, fix from Changli Gao. 9) Memleak fix in wext-core from Julia Lawall. 10) Consistently handle invalid TCP packets in ipv4 vs. ipv6 conntrack, from Jozsef Kadlecsik. 11) Validate IP header length properly in netfilter conntrack's ipv4_get_l4proto(). * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (39 commits) NFC: Fix the LLCP Tx fragmentation loop rtlwifi: Add missing DMA buffer unmapping for PCI drivers rtlwifi: Preallocate USB read buffers and eliminate kalloc in read routine tcp: avoid order-1 allocations on wifi and tx path net: allow pskb_expand_head() to get maximum tailroom bridge: Do not send queries on multicast group leaves MAINTAINERS: Mark NATSEMI driver as orphan'd. tcp: fix tcp_rcv_rtt_update() use of an unscaled RTT sample tcp: restore correct limit Revert "ath9k: fix going to full-sleep on PS idle" rt2x00: Fix rfkill_polling register function. bcma: fix build error on MIPS; implicit pcibios_enable_device netfilter: nf_conntrack: fix incorrect logic in nf_conntrack_init_net netfilter: nf_ct_ipv4: packets with wrong ihl are invalid netfilter: nf_ct_ipv4: handle invalid IPv4 and IPv6 packets consistently net/wireless/wext-core.c: add missing kfree rtlwifi: Fix oops on rate-control failure mac80211: Convert WARN_ON to WARN_ON_ONCE rtlwifi: rtl8192de: Fix firmware initialization nl80211: ensure interface is up in various APIs ...
2012-04-12Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "Mostly exynos and intel. Intel has 3 regression fixers (more info in intel merge commit), along with some other make hw work fixes, exynos has some cleanups and an ioctl fix. A couple of radeon fixes, couple of build fixes, and a savage userspace interface possible overflow fix." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (23 commits) drm/exynos: fixed exynos broken ioctl drm/i915: clear fencing tracking state when retiring requests drm/exynos: fix to pointer manager member of struct exynos_drm_subdrv drm/exynos: fix struct for operation callback functions to driver name drm/exynos: use define instead of default_win member in struct mixer_context drm/exynos: rename s/HDMI_OVERLAY_NUMBER/MIXER_WIN_NR drm/exynos: remove unused codes in hdmi and mixer drm/exynos: remove unnecessary type conversion of hdmi and mixer drm/i915: make rc6 module parameter read-only drm/i915: implement ColorBlt w/a drm/i915/ringbuffer: Exclude last 2 cachlines of ring on 845g Revert "drm/i915: reenable gmbus on gen3+ again" drm/radeon: only add the mm i2c bus if the hw_i2c module param is set vgaarb.h: fix build warnings drm/i915: properly compute dp dithering for user-created modes drm/radeon/kms: fix DVO setup on some r4xx chips drm/savage: fix integer overflows in savage_bci_cmdbuf() drm/radeon: replace udelay with mdelay for long timeouts drm/i915: Finish any pending operations on the framebuffer before disabling drm/i915: Removed IVB forced enable of sprite dest key. ...
2012-04-12Treat ND option 31 as userland (DNSSL support)Alexey I. Froloff
As specified in RFC6106, DNSSL option contains one or more domain names of DNS suffixes. 8-bit identifier of the DNSSL option type as assigned by the IANA is 31. This option should also be treated as userland. Signed-off-by: Alexey I. Froloff <raorn@raorn.name> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-12Merge tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
Pull irqdomain bug fixes from Grant Likely: "This branch fixes a bug in irq_create_mapping() where an error return from irq_alloc_desc_from() gets ignored. It also removes irq_virq_count to fix a bug on powerpc where the irqdomain code does not find irqs allocated above the CONFIG_NR_IRQS boundary. The remaining patches get rid of an completely pointless export and fix some minor bugs in the irqdomain debug output." * tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux-2.6: irq_domain: Move irq_virq_count into NOMAP revmap irqdomain: Fix debugfs formatting irq_domain: correct the debugfs file name irq: Kill pointless irqd_to_hw export irq/irq_domain: Quit ignoring error returns from irq_alloc_desc_from().
2012-04-12Merge branch 'master' into for-davemJohn W. Linville
Conflicts: drivers/net/wireless/iwlwifi/iwl-testmode.c net/wireless/nl80211.c
2012-04-12Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2012-04-12Merge branch 'exynos-drm-fixes' of ↵Dave Airlie
git://git.infradead.org/users/kmpark/linux-samsung into drm-intel-fixes * 'exynos-drm-fixes' of git://git.infradead.org/users/kmpark/linux-samsung: drm/exynos: fixed exynos broken ioctl drm/exynos: fix to pointer manager member of struct exynos_drm_subdrv drm/exynos: fix struct for operation callback functions to driver name drm/exynos: use define instead of default_win member in struct mixer_context drm/exynos: rename s/HDMI_OVERLAY_NUMBER/MIXER_WIN_NR drm/exynos: remove unused codes in hdmi and mixer drm/exynos: remove unnecessary type conversion of hdmi and mixer drm/exynos: add format list of plane drm/exynos: fixed duplicated page allocation bug. drm/exynos: fixed page align and code clean.
2012-04-12Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2012-04-12drm/exynos: fixed exynos broken ioctlInki Dae
this patch removes the pointer of uint64_t *edid. it should be just a uint64_t. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-04-12irq_domain: Move irq_virq_count into NOMAP revmapGrant Likely
This patch replaces the old global setting of irq_virq_count that is only used by the NOMAP mapping and instead uses a revmap_data property so that the maximum NOMAP allocation can be set per NOMAP irq_domain. There is exactly one user of irq_virq_count in-tree right now: PS3. Also, irq_virq_count is only useful for the NOMAP mapping. So, instead of having a single global irq_virq_count values, this change drops it entirely and added a max_irq argument to irq_domain_add_nomap(). That makes it a property of an individual nomap irq domain instead of a global system settting. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com>
2012-04-11cfg80211: add channel switch notify eventThomas Pedersen
The firmware may decide to switch channels while already beaconing, e.g. in response to a cfg80211 connect request on a different vif. Add this event to notify userspace when an AP or GO interface has successfully migrated to a new channel, so it can update its configuration accordingly. Signed-off-by: Thomas Pedersen <c_tpeder@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-11cfg80211/mac80211: enable proper device_set_wakeup_enable handlingJohannes Berg
In WoWLAN, we only get the triggers when we actually get to suspend. As a consequence, drivers currently don't know that the device should enable wakeup. However, the device_set_wakeup_enable() API is intended to be called when the wakeup is enabled, not later when needed. Add a new set_wakeup() call to cfg80211 and mac80211 to allow drivers to properly call device_set_wakeup_enable. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-11mac80211: add improved HW queue controlJohannes Berg
mac80211 currently only supports one hardware queue per AC. This is already problematic for off-channel uses since if we go off channel while the BE queue is full and then try to send an off-channel frame the frame will never go out. This will become worse when we support multi-channel since then a queue on one channel might be full, but we have to stop the software queue for all channels. That is obviously not desirable. To address this problem allow drivers to register more hardware queues, and allow them to map them to virtual interfaces. When they stop a hardware queue the corresponding AC software queues on the correct interfaces will be stopped as well. Additionally, there's an off-channel queue to solve that problem and a per-interface after-DTIM beacon queue. This allows drivers to manage software queues closer to how the hardware works. Currently, there's a limit of 16 hardware queues. This may or may not be sufficient, we can adjust it as needed. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-11mac80211: add explicit monitor interface if neededJohannes Berg
The queue mapping redesign that I'm planning to do will break pure injection unless we handle monitor interfaces explicitly. One possible option would be to have the driver tell mac80211 about monitor mode queues etc., but that would duplicate the API since we already need to have queue assignments handled per virtual interface. So in order to solve this, have a virtual monitor interface that is added whenever all active vifs are monitors. We could also use the state of one of the monitor interfaces, but managing that would be complicated, so allocate separate state. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-11mac80211: Indicate basic rates when adding rate IEsAshok Nagarajan
Basic rates are added with supported rates IE and extended supported rates IE. Signed-off-by: Ashok Nagarajan <ashok@cozybit.com> Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-11Merge tag 'sound-3.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: - A series of fixes for Conexant 20549 HD-audio codec chip - A workaround for HDMI hotplug debug prints that annoyed people - A fix for the new support of platform DAPM contexts - Many driver-specific minor fixes * tag 'sound-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - hide HDMI/ELD printks unless snd.debug=2 ALSA: sound/isa/sscape.c: add missing resource-release code sound: sound/oss/msnd_pinnacle.c: add vfrees ALSA: hda - clean up CX20549 test mixer setup ALSA: hda - CX20549 doesn't need pin_amp_workaround. ALSA: hda - Remove CD control from model=benq for CX20549 ALSA: hda - fix record volume controls of CX20459 ("Venice") ALSA: hda - Rename capture sources of CX20549 to match common conventions ALSA: hda - Fix proc output for ADC amp values of CX20549 ASoC: tegra: fix i2s compilation when !CONFIG_DEBUG_FS ASoC: set idle_bias_off=1 for all platform DAPM contexts ASoC: imx-audmux: Check for NULL pointer ASoC: imx-audmux: Fix ssi port numbers in sysfs ASoC: ak4642: fixup: mute needs +1 step MAINTAINERS: Don't list everyone working on Wolfson drivers MAINTAINERS: Add missing ASoC OMAP co-maintainer ASoC: pxa: pxa2xx-i2s: add io.h for IOMEM macro ASoC: tegra: ensure clocks are enabled when touching registers ASoC: sgtl5000: Enable VAG when DAC/ADC up ALSA: asihpi - fix return value of hpios_locked_mem_alloc()
2012-04-11tcp: avoid order-1 allocations on wifi and tx pathEric Dumazet
Marc Merlin reported many order-1 allocations failures in TX path on its wireless setup, that dont make any sense with MTU=1500 network, and non SG capable hardware. After investigation, it turns out TCP uses sk_stream_alloc_skb() and used as a convention skb_tailroom(skb) to know how many bytes of data payload could be put in this skb (for non SG capable devices) Note : these skb used kmalloc-4096 (MTU=1500 + MAX_HEADER + sizeof(struct skb_shared_info) being above 2048) Later, mac80211 layer need to add some bytes at the tail of skb (IEEE80211_ENCRYPT_TAILROOM = 18 bytes) and since no more tailroom is available has to call pskb_expand_head() and request order-1 allocations. This patch changes sk_stream_alloc_skb() so that only sk->sk_prot->max_header bytes of headroom are reserved, and use a new skb field, avail_size to hold the data payload limit. This way, order-0 allocations done by TCP stack can leave more than 2 KB of tailroom and no more allocation is performed in mac80211 layer (or any layer needing some tailroom) avail_size is unioned with mark/dropcount, since mark will be set later in IP stack for output packets. Therefore, skb size is unchanged. Reported-by: Marc MERLIN <marc@merlins.org> Tested-by: Marc MERLIN <marc@merlins.org> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-11team: add user_linkup and user_linkup_enabled per-port optionJiri Pirko
Allows userspace to setup linkup for ports. Default is to take linkup directly from ethtool state. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-11team: add bool option typeJiri Pirko
Add another (hopefully last) option type. Use NLA_FLAG to implement that. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-11team: add support for per-port optionsJiri Pirko
This patch allows to create per-port options. That becomes handy for all sorts of stuff, for example for userspace driven link-state, 802.3ad implementation and so on. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-11vgaarb.h: fix build warningsRandy Dunlap
Fix build warnings by providing a struct stub since no fields of the struct are used: include/linux/vgaarb.h:66:9: warning: 'struct pci_dev' declared inside parameter list include/linux/vgaarb.h:66:9: warning: its scope is only this definition or declaration, which is probably not what you want include/linux/vgaarb.h:99:34: warning: 'struct pci_dev' declared inside parameter list include/linux/vgaarb.h:109:6: warning: 'struct pci_dev' declared inside parameter list include/linux/vgaarb.h:121:8: warning: 'struct pci_dev' declared inside parameter list include/linux/vgaarb.h:140:37: warning: 'struct pci_dev' declared inside parameter list Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-04-10irq: Kill pointless irqd_to_hw exportGrant Likely
It makes no sense to export this trivial function. Make it a static inline instead. This patch also drops virq_to_hw from arch/c6x since it is unused by that architecture. v2: Move irq_hw_number_t into types.h to fix ARM build failure Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-04-10Merge tag 'dmaengine-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengine Pull dmaengine fixes from Dan Williams: 1/ regression fix for Xen as it now trips over a broken assumption about the dma address size on 32-bit builds 2/ new quirk for netdma to ignore dma channels that cannot meet netdma alignment requirements 3/ fixes for two long standing issues in ioatdma (ring size overflow) and iop-adma (potential stack corruption) * tag 'dmaengine-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengine: netdma: adding alignment check for NETDMA ops ioatdma: DMA copy alignment needed to address IOAT DMA silicon errata ioat: ring size variables need to be 32bit to avoid overflow iop-adma: Corrected array overflow in RAID6 Xscale(R) test. ioat: fix size of 'completion' for Xen
2012-04-10{nl,cfg}80211: Support for mesh synchronizationJavier Cardona
Report Toffset to userspace. Let userspace select the mesh synchronization method. Signed-off-by: Marco Porsch <marco.porsch@s2005.tu-chemnitz.de> Signed-off-by: Pavel Zubarev <pavel.zubarev@gmail.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10mac80211: Implement mesh synchronization frameworkJavier Cardona
This patch adds MBSS extensible synchronization framework (Sec. 13.13.2 of IEEE Std. 802.11-2012). The framework is implemented via an ops table which defines the following functions: rx_bcn_presp() - this is called every time a mesh beacon is received. adjust_tbtt() - this is called immediately before a beacon is about to be transmitted. The default neighbor offset synchronization defined in the standard is implemented. We also provide template functions for vendor specific methods. When neighbor offset synchronization is active (which is the default) mesh neighbors in the same MBSS will track timing offsets to each other and compensate clock drift. In our tests we observed that this mesh synchronization implementation successfully corrected drifts between stations of ~2PPM while introducing a jitter of ~20us. It is also possible to test this framework on mac80211_hwsim simulated phys to see how it behaves under different topologies, over poor links, etc. Signed-off-by: Marco Porsch <marco.porsch@s2005.tu-chemnitz.de> Signed-off-by: Pavel Zubarev <pavel.zubarev@gmail.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10cfg80211/nl80211: clarify TX queue APIJohannes Berg
With the plan to change mac80211's queue API to not map ACs to queues 1:1, it seems necessary to clarify some APIs that act on ACs rather than on queues to spell that out explicitly. Do this. Also verify that the AC number given is valid. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10mac80211: remove antenna_sel_tx TX info fieldJohannes Berg
This field is never set to anything non-zero in mac80211, so we should be able to remove it. Unfortunately though, the iwlwifi and iwlegacy drivers use it for their internal TX status processing (which shouldn't be using the rate control API to start with), so add a new field "status.antenna" for them, at least for now. In the future, I plan to use the new field to hold the hardware queue, while the SKB's queue mapping holds the AC. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10mac80211: notify driver of rate control updatesJohannes Berg
Devices that have internal rate control need to be notified when the bandwidth or SMPS state changes just like external rate control algorithms get a notification now. Add this notification and clarify the change bits while at it, the HT_CHANGED bit really meant only bandwidth changed. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10mac80211: remove channel type argument from rate_updateJohannes Berg
The channel type argument to the rate_update() callback isn't really the correct way to give the rate control algorithm about the desired RX bandwidth of the peer. Remove this argument, and instead update the STA capabilities with 20/40 appropriately. The SMPS update done by this callback works in the same way, so this makes the callback cleaner. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10Merge branch 'master' of git://1984.lsi.us.es/netDavid S. Miller
2012-04-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2012-04-10ALSA: hda - hide HDMI/ELD printks unless snd.debug=2Fengguang Wu
Also remove two warnings when CONFIG_SND_DEBUG is not set: sound/pci/hda/patch_hdmi.c: In function ‘hdmi_intrinsic_event’: sound/pci/hda/patch_hdmi.c:761:6: warning: unused variable ‘eldv’ [-Wunused-variable] sound/pci/hda/patch_hdmi.c:760:6: warning: unused variable ‘pd’ [-Wunused-variable] Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-09mac80211: fix the sparse warnings on endian handling in RANN propagationChun-Yeow Yeoh
The HWMP sequence number of received RANN element is compared to decide whether to be propagated. The sequence number is required to covert from 32bit little endian data into CPUs endianness for comparison. The same applies to the RANN metric. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09wireless: rename ht_info to ht_operationJohannes Berg
Since some of the HT code pre-dates 802.11n-2009 some names are wrong. The one that bothers me most is that "HT operation" is called "HT information" in our code and that causes confusion. Rename "HT information" to "HT operation" and also the control_chan field to primary_chan to match the name used in the spec. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09mac80211: Convert WARN_ON to WARN_ON_ONCELarry Finger
When the control-rate tables are not set up correctly, it makes little sense to spam the logs, thus change the WARN_ON to WARN_ON_ONCE. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-02-03 07:11:43 +0000