summaryrefslogtreecommitdiffstats
path: root/include
AgeCommit message (Collapse)Author
2013-11-21Merge branch 'ttm-fixes-3.13' of git://people.freedesktop.org/~thomash/linux ↵Dave Airlie
into drm-fixes The set_need_resched() removal fix and yet another fix in ttm_bo_move_memcpy(). * 'ttm-fixes-3.13' of git://people.freedesktop.org/~thomash/linux: drm/ttm: Remove set_need_resched from the ttm fault handler drm/ttm: Don't move non-existing data
2013-11-21Merge branch 'vmwgfx-fixes-3.13' of ↵Dave Airlie
git://people.freedesktop.org/~thomash/linux into drm-fixes Below is a fix for a false lockep warning, and the vmwgfx prime implementation. * 'vmwgfx-fixes-3.13' of git://people.freedesktop.org/~thomash/linux: drm/vmwgfx: Make vmwgfx dma buffers prime aware drm/vmwgfx: Make surfaces prime-aware drm/vmwgfx: Hook up the prime ioctls drm/ttm: Add a minimal prime implementation for ttm base objects drm/vmwgfx: Fix false lockdep warning drm/ttm: Allow execbuf util reserves without ticket
2013-11-21Merge branch 'drm-next-3.13' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes More fixes for radeon. This adds new queries for tiling on CIK, and fixes a crash in handling acpi atif backlight events on CIK. Some fixes for radeon for 3.13. Mostly CI stability fixes. I think I've tracked down the stability problems with dpm on Trinity/Richland, so I'm going to enable that by default now. * 'drm-next-3.13' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: hook up backlight functions for CI and KV family. drm/radeon/cik: Add macrotile mode array query drm/radeon/cik: Return backend map information to userspace drm/radeon: enable DPM by default in TN asics drm/radeon: adjust TN dpm parameters for stability (v2) drm/radeon: use a single doorbell for cik kms compute drm/radeon/vm: don't attempt to update ptes if ib allocation fails drm/radeon: disable CIK CP semaphores for now drm/radeon: allow semaphore emission to fail drm/radeon: add semaphore trace point radeon: workaround pinning failure on low ram gpu radeon/i2c: do not count reg index in number of i2c byte we are writing. drm/radeon: cypress_dpm: Fix unused variable warning when CONFIG_ACPI=n drm: radeon: ni_dpm: Fix unused variable warning when CONFIG_ACPI=n
2013-11-20net/phy: Add the autocross feature for forced links on VSC82x4Madalin Bucur
Add auto-MDI/MDI-X capability for forced (autonegotiation disabled) 10/100 Mbps speeds on Vitesse VSC82x4 PHYs. Exported previously static function genphy_setup_forced() required by the new config_aneg handler in the Vitesse PHY module. Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com> Signed-off-by: Shruti Kanetkar <Shruti@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-20net: rework recvmsg handler msg_name and msg_namelen logicHannes Frederic Sowa
This patch now always passes msg->msg_namelen as 0. recvmsg handlers must set msg_namelen to the proper size <= sizeof(struct sockaddr_storage) to return msg_name to the user. This prevents numerous uninitialized memory leaks we had in the recvmsg handlers and makes it harder for new code to accidentally leak uninitialized memory. Optimize for the case recvfrom is called with NULL as address. We don't need to copy the address at all, so set it to NULL before invoking the recvmsg handler. We can do so, because all the recvmsg handlers must cope with the case a plain read() is called on them. read() also sets msg_name to NULL. Also document these changes in include/linux/net.h as suggested by David Miller. Changes since RFC: Set msg->msg_name = NULL if user specified a NULL in msg_name but had a non-null msg_namelen in verify_iovec/verify_compat_iovec. This doesn't affect sendto as it would bail out earlier while trying to copy-in the address. It also more naturally reflects the logic by the callers of verify_iovec. With this change in place I could remove " if (!uaddr || msg_sys->msg_namelen == 0) msg->msg_name = NULL ". This change does not alter the user visible error logic as we ignore msg_namelen as long as msg_name is NULL. Also remove two unnecessary curly brackets in ___sys_recvmsg and change comments to netdev style. Cc: David Miller <davem@davemloft.net> Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-20btrfs: Use trace condition for get_extent tracepointSteven Rostedt
Doing an if statement to test some condition to know if we should trigger a tracepoint is pointless when tracing is disabled. This just adds overhead and wastes a branch prediction. This is why the TRACE_EVENT_CONDITION() was created. It places the check inside the jump label so that the branch does not happen unless tracing is enabled. That is, instead of doing: if (em) trace_btrfs_get_extent(root, em); Which is basically this: if (em) if (static_key(trace_btrfs_get_extent)) { Using a TRACE_EVENT_CONDITION() we can just do: trace_btrfs_get_extent(root, em); And the condition trace event will do: if (static_key(trace_btrfs_get_extent)) { if (em) { ... The static key is a non conditional jump (or nop) that is faster than having to check if em is NULL or not. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-11-20Revert "mm: create a separate slab for page->ptl allocation"Linus Torvalds
This reverts commit ea1e7ed33708c7a760419ff9ded0a6cb90586a50. Al points out that while the commit *does* actually create a separate slab for the page->ptl allocation, that slab is never actually used, and the code continues to use kmalloc/kfree. Damien Wyart points out that the original patch did have the conversion to use kmem_cache_alloc/free, so it got lost somewhere on its way to me. Revert the half-arsed attempt that didn't do anything. If we really do want the special slab (remember: this is all relevant just for debug builds, so it's not necessarily all that critical) we might as well redo the patch fully. Reported-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Andrew Morton <akpm@linux-foundation.org> Cc: Kirill A Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-20Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs bits and pieces from Al Viro: "Assorted bits that got missed in the first pull request + fixes for a couple of coredump regressions" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fold try_to_ascend() into the sole remaining caller dcache.c: get rid of pointless macros take read_seqbegin_or_lock() and friends to seqlock.h consolidate simple ->d_delete() instances gfs2: endianness misannotations dump_emit(): use __kernel_write(), not vfs_write() dump_align(): fix the dumb braino
2013-11-20Merge tag 'pm+acpi-2-3.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI and power management updates from Rafael Wysocki: - ACPI-based device hotplug fixes for issues introduced recently and a fix for an older error code path bug in the ACPI PCI host bridge driver - Fix for recently broken OMAP cpufreq build from Viresh Kumar - Fix for a recent hibernation regression related to s2disk - Fix for a locking-related regression in the ACPI EC driver from Puneet Kumar - System suspend error code path fix related to runtime PM and runtime PM documentation update from Ulf Hansson - cpufreq's conservative governor fix from Xiaoguang Chen - New processor IDs for intel_idle and turbostat and removal of an obsolete Kconfig option from Len Brown - New device IDs for the ACPI LPSS (Low-Power Subsystem) driver and ACPI-based PCI hotplug (ACPIPHP) cleanup from Mika Westerberg - Removal of several ACPI video DMI blacklist entries that are not necessary any more from Aaron Lu - Rework of the ACPI companion representation in struct device and code cleanup related to that change from Rafael J Wysocki, Lan Tianyu and Jarkko Nikula - Fixes for assigning names to ACPI-enumerated I2C and SPI devices from Jarkko Nikula * tag 'pm+acpi-2-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (24 commits) PCI / hotplug / ACPI: Drop unused acpiphp_debug declaration ACPI / scan: Set flags.match_driver in acpi_bus_scan_fixed() ACPI / PCI root: Clear driver_data before failing enumeration ACPI / hotplug: Fix PCI host bridge hot removal ACPI / hotplug: Fix acpi_bus_get_device() return value check cpufreq: governor: Remove fossil comment in the cpufreq_governor_dbs() ACPI / video: clean up DMI table for initial black screen problem ACPI / EC: Ensure lock is acquired before accessing ec struct members PM / Hibernate: Do not crash kernel in free_basic_memory_bitmaps() ACPI / AC: Remove struct acpi_device pointer from struct acpi_ac spi: Use stable dev_name for ACPI enumerated SPI slaves i2c: Use stable dev_name for ACPI enumerated I2C slaves ACPI: Provide acpi_dev_name accessor for struct acpi_device device name ACPI / bind: Use (put|get)_device() on ACPI device objects too ACPI: Eliminate the DEVICE_ACPI_HANDLE() macro ACPI / driver core: Store an ACPI device pointer in struct acpi_dev_node cpufreq: OMAP: Fix compilation error 'r & ret undeclared' PM / Runtime: Fix error path for prepare PM / Runtime: Update documentation around probe|remove|suspend cpufreq: conservative: set requested_freq to policy max when it is over policy max ...
2013-11-20Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave-dmaengine changes from Vinod Koul: "This brings for slave dmaengine: - Change dma notification flag to DMA_COMPLETE from DMA_SUCCESS as dmaengine can only transfer and not verify validaty of dma transfers - Bunch of fixes across drivers: - cppi41 driver fixes from Daniel - 8 channel freescale dma engine support and updated bindings from Hongbo - msx-dma fixes and cleanup by Markus - DMAengine updates from Dan: - Bartlomiej and Dan finalized a rework of the dma address unmap implementation. - In the course of testing 1/ a collection of enhancements to dmatest fell out. Notably basic performance statistics, and fixed / enhanced test control through new module parameters 'run', 'wait', 'noverify', and 'verbose'. Thanks to Andriy and Linus [Walleij] for their review. - Testing the raid related corner cases of 1/ triggered bugs in the recently added 16-source operation support in the ioatdma driver. - Some minor fixes / cleanups to mv_xor and ioatdma" * 'next' of git://git.infradead.org/users/vkoul/slave-dma: (99 commits) dma: mv_xor: Fix mis-usage of mmio 'base' and 'high_base' registers dma: mv_xor: Remove unneeded NULL address check ioat: fix ioat3_irq_reinit ioat: kill msix_single_vector support raid6test: add new corner case for ioatdma driver ioatdma: clean up sed pool kmem_cache ioatdma: fix selection of 16 vs 8 source path ioatdma: fix sed pool selection ioatdma: Fix bug in selftest after removal of DMA_MEMSET. dmatest: verbose mode dmatest: convert to dmaengine_unmap_data dmatest: add a 'wait' parameter dmatest: add basic performance metrics dmatest: add support for skipping verification and random data setup dmatest: use pseudo random numbers dmatest: support xor-only, or pq-only channels in tests dmatest: restore ability to start test at module load and init dmatest: cleanup redundant "dmatest: " prefixes dmatest: replace stored results mechanism, with uniform messages Revert "dmatest: append verify result to results" ...
2013-11-20Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block IO fixes from Jens Axboe: "Normally I'd defer my initial for-linus pull request until after the merge window, but a race was uncovered in the virtio-blk conversion to blk-mq that could cause hangs. So here's a small collection of fixes for you to pull: - The fix for the virtio-blk IO hang reported by Dave Chinner, from Shaohua and myself. - Add the Insert blktrace event for blk-mq. This makes 'btt' happy when it is doing it's state transition analysis. - Ensure that blk-mq has disk/partition stats enabled by default, instead of making it opt-in. - A fix for __bio_add_page() and large sector counts" * 'for-linus' of git://git.kernel.dk/linux-block: blk-mq: add blktrace insert event trace virtio-blk: virtqueue_kick() must be ordered with other virtqueue operations blk-mq: ensure that we set REQ_IO_STAT so diskstats work bio: fix argument of __bio_add_page() for max_sectors > 0xffff
2013-11-20Merge tag 'md/3.13' of git://neil.brown.name/mdLinus Torvalds
Pull md update from Neil Brown: "Mostly optimisations and obscure bug fixes. - raid5 gets less lock contention - raid1 gets less contention between normal-io and resync-io during resync" * tag 'md/3.13' of git://neil.brown.name/md: md/raid5: Use conf->device_lock protect changing of multi-thread resources. md/raid5: Before freeing old multi-thread worker, it should flush them. md/raid5: For stripe with R5_ReadNoMerge, we replace REQ_FLUSH with REQ_NOMERGE. UAPI: include <asm/byteorder.h> in linux/raid/md_p.h raid1: Rewrite the implementation of iobarrier. raid1: Add some macros to make code clearly. raid1: Replace raise_barrier/lower_barrier with freeze_array/unfreeze_array when reconfiguring the array. raid1: Add a field array_frozen to indicate whether raid in freeze state. md: Convert use of typedef ctl_table to struct ctl_table md/raid5: avoid deadlock when raid5 array has unack badblocks during md_stop_writes. md: use MD_RECOVERY_INTR instead of kthread_should_stop in resync thread. md: fix some places where mddev_lock return value is not checked. raid5: Retry R5_ReadNoMerge flag when hit a read error. raid5: relieve lock contention in get_active_stripe() raid5: relieve lock contention in get_active_stripe() wait: add wait_event_cmd() md/raid5.c: add proper locking to error path of raid5_start_reshape. md: fix calculation of stacking limits on level change. raid5: Use slow_path to release stripe when mddev->thread is null
2013-11-20target_core_alua: Store supported ALUA statesHannes Reinecke
The supported ALUA states might be different for individual devices, so store it in a separate field. (nab: Remove unnecessary line continuation) Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-11-20target core: rename (ex,im)plict -> (ex,im)plicitHannes Reinecke
Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-11-20ACPI / hotplug: Fix conflicted PCI bridge notify handlersToshi Kani
The PCI host bridge scan handler installs its own notify handler, handle_hotplug_event_root(), by itself. Nevertheless, the ACPI hotplug framework also installs the common notify handler, acpi_hotplug_notify_cb(), for PCI root bridges. This causes acpi_hotplug_notify_cb() to call _OST method with unsupported error as hotplug.enabled is not set. To address this issue, introduce hotplug.ignore flag, which indicates that the scan handler installs its own notify handler by itself. The ACPI hotplug framework does not install the common notify handler when this flag is set. Signed-off-by: Toshi Kani <toshi.kani@hp.com> [rjw: Changed the name of the new flag] Cc: 3.9+ <stable@vger.kernel.org> # 3.9+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-11-20drm/ttm: Remove set_need_resched from the ttm fault handlerThomas Hellstrom
Addresses "[BUG] completely bonkers use of set_need_resched + VM_FAULT_NOPAGE". In the first occurence it was used to try to be nice while releasing the mmap_sem and retrying the fault to work around a locking inversion. The second occurence was never used. There has been some discussion whether we should change the locking order to mmap_sem -> bo_reserve. This patch doesn't address that issue, and leaves that locking order undefined. The solution that we release the mmap_sem if tryreserve fails and wait for the buffer to become unreserved is something we want in any case, and follows how the core vm system waits for pages to be come unlocked while releasing the mmap_sem. The code also outlines what needs to be changed if we want to establish the locking order as mmap_sem -> bo::reserve. One slight issue that remains with this code is that the fault handler might be prone to starvation if another thread countinously reserves the buffer. IMO that usage pattern is highly unlikely. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2013-11-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "Mostly these are fixes for fallout due to merge window changes, as well as cures for problems that have been with us for a much longer period of time" 1) Johannes Berg noticed two major deficiencies in our genetlink registration. Some genetlink protocols we passing in constant counts for their ops array rather than something like ARRAY_SIZE(ops) or similar. Also, some genetlink protocols were using fixed IDs for their multicast groups. We have to retain these fixed IDs to keep existing userland tools working, but reserve them so that other multicast groups used by other protocols can not possibly conflict. In dealing with these two problems, we actually now use less state management for genetlink operations and multicast groups. 2) When configuring interface hardware timestamping, fix several drivers that simply do not validate that the hwtstamp_config value is one the driver actually supports. From Ben Hutchings. 3) Invalid memory references in mwifiex driver, from Amitkumar Karwar. 4) In dev_forward_skb(), set the skb->protocol in the right order relative to skb_scrub_packet(). From Alexei Starovoitov. 5) Bridge erroneously fails to use the proper wrapper functions to make calls to netdev_ops->ndo_vlan_rx_{add,kill}_vid. Fix from Toshiaki Makita. 6) When detaching a bridge port, make sure to flush all VLAN IDs to prevent them from leaking, also from Toshiaki Makita. 7) Put in a compromise for TCP Small Queues so that deep queued devices that delay TX reclaim non-trivially don't have such a performance decrease. One particularly problematic area is 802.11 AMPDU in wireless. From Eric Dumazet. 8) Fix crashes in tcp_fastopen_cache_get(), we can see NULL socket dsts here. Fix from Eric Dumzaet, reported by Dave Jones. 9) Fix use after free in ipv6 SIT driver, from Willem de Bruijn. 10) When computing mergeable buffer sizes, virtio-net fails to take the virtio-net header into account. From Michael Dalton. 11) Fix seqlock deadlock in ip4_datagram_connect() wrt. statistic bumping, this one has been with us for a while. From Eric Dumazet. 12) Fix NULL deref in the new TIPC fragmentation handling, from Erik Hugne. 13) 6lowpan bit used for traffic classification was wrong, from Jukka Rissanen. 14) macvlan has the same issue as normal vlans did wrt. propagating LRO disabling down to the real device, fix it the same way. From Michal Kubecek. 15) CPSW driver needs to soft reset all slaves during suspend, from Daniel Mack. 16) Fix small frame pacing in FQ packet scheduler, from Eric Dumazet. 17) The xen-netfront RX buffer refill timer isn't properly scheduled on partial RX allocation success, from Ma JieYue. 18) When ipv6 ping protocol support was added, the AF_INET6 protocol initialization cleanup path on failure was borked a little. Fix from Vlad Yasevich. 19) If a socket disconnects during a read/recvmsg/recvfrom/etc that blocks we can do the wrong thing with the msg_name we write back to userspace. From Hannes Frederic Sowa. There is another fix in the works from Hannes which will prevent future problems of this nature. 20) Fix route leak in VTI tunnel transmit, from Fan Du. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (106 commits) genetlink: make multicast groups const, prevent abuse genetlink: pass family to functions using groups genetlink: add and use genl_set_err() genetlink: remove family pointer from genl_multicast_group genetlink: remove genl_unregister_mc_group() hsr: don't call genl_unregister_mc_group() quota/genetlink: use proper genetlink multicast APIs drop_monitor/genetlink: use proper genetlink multicast APIs genetlink: only pass array to genl_register_family_with_ops() tcp: don't update snd_nxt, when a socket is switched from repair mode atm: idt77252: fix dev refcnt leak xfrm: Release dst if this dst is improper for vti tunnel netlink: fix documentation typo in netlink_set_err() be2net: Delete secondary unicast MAC addresses during be_close be2net: Fix unconditional enabling of Rx interface options net, virtio_net: replace the magic value ping: prevent NULL pointer dereference on write to msg_name bnx2x: Prevent "timeout waiting for state X" bnx2x: prevent CFC attention bnx2x: Prevent panic during DMAE timeout ...
2013-11-19genetlink: make multicast groups const, prevent abuseJohannes Berg
Register generic netlink multicast groups as an array with the family and give them contiguous group IDs. Then instead of passing the global group ID to the various functions that send messages, pass the ID relative to the family - for most families that's just 0 because the only have one group. This avoids the list_head and ID in each group, adding a new field for the mcast group ID offset to the family. At the same time, this allows us to prevent abusing groups again like the quota and dropmon code did, since we can now check that a family only uses a group it owns. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-19genetlink: pass family to functions using groupsJohannes Berg
This doesn't really change anything, but prepares for the next patch that will change the APIs to pass the group ID within the family, rather than the global group ID. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-19genetlink: add and use genl_set_err()Johannes Berg
Add a static inline to generic netlink to wrap netlink_set_err() to make it easier to use here - use it in openvswitch (the only generic netlink user of netlink_set_err()). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-19genetlink: remove family pointer from genl_multicast_groupJohannes Berg
There's no reason to have the family pointer there since it can just be passed internally where needed, so remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-19genetlink: remove genl_unregister_mc_group()Johannes Berg
There are no users of this API remaining, and we'll soon change group registration to be static (like ops are now) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-19quota/genetlink: use proper genetlink multicast APIsJohannes Berg
The quota code is abusing the genetlink API and is using its family ID as the multicast group ID, which is invalid and may belong to somebody else (and likely will.) Make the quota code use the correct API, but since this is already used as-is by userspace, reserve a family ID for this code and also reserve that group ID to not break userspace assumptions. Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-19genetlink: only pass array to genl_register_family_with_ops()Johannes Berg
As suggested by David Miller, make genl_register_family_with_ops() a macro and pass only the array, evaluating ARRAY_SIZE() in the macro, this is a little safer. The openvswitch has some indirection, assing ops/n_ops directly in that code. This might ultimately just assign the pointers in the family initializations, saving the struct genl_family_and_ops and code (once mcast groups are handled differently.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-19NFS: Enabling v4.2 should not recompile nfsd and lockdAnna Schumaker
When CONFIG_NFS_V4_2 is toggled nfsd and lockd will be recompiled, instead of only the nfs client. This patch moves a small amount of code into the client directory to avoid unnecessary recompiles. Signed-off-by: Anna Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-11-19Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq cleanups from Ingo Molnar: "This is a multi-arch cleanup series from Thomas Gleixner, which we kept to near the end of the merge window, to not interfere with architecture updates. This series (motivated by the -rt kernel) unifies more aspects of IRQ handling and generalizes PREEMPT_ACTIVE" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: preempt: Make PREEMPT_ACTIVE generic sparc: Use preempt_schedule_irq ia64: Use preempt_schedule_irq m32r: Use preempt_schedule_irq hardirq: Make hardirq bits generic m68k: Simplify low level interrupt handling code genirq: Prevent spurious detection for unconditionally polled interrupts
2013-11-19genirq: Correct fuzzy and fragile IRQ_RETVAL() definitionGeert Uytterhoeven
commit bedd30d986a0 ("genirq: make irqreturn_t an enum") blindly replaced "0" by "IRQ_NONE" in the "IRQ_RETVAL(x)" macro definition. However, as "x" is a condition, "0" meant "boolean false", not an irqreturn_t value. All of this worked, and kept working after the addition of IRQ_WAKE_THREAD, as - both "boolean false" and "IRQ_NONE" are "0" (for the comparison), - "boolean true" and "boolean false" nicely map to the correct values of "IRQ_HANDLED" and "IRQ_NONE" (for the return value). Correct the macro definition for clarity and future-proofness. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-11-19blk-mq: ensure that we set REQ_IO_STAT so diskstats workJens Axboe
If disk stats are enabled on the queue, a request needs to be marked with REQ_IO_STAT for accounting to be active on that request. This fixes an issue with virtio-blk not showing up in /proc/diskstats after the conversion to blk-mq. Add QUEUE_FLAG_MQ_DEFAULT, setting stats and same cpu-group completion on by default. Reported-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-11-19sched: Remove unused variable in 'struct sched_domain'Alex Shi
The 'u64 last_update' variable isn't used now, remove it to save a bit of space. Signed-off-by: Alex Shi <alex.shi@linaro.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Morten.Rasmussen@arm.com Cc: linaro-kernel@lists.linaro.org Link: http://lkml.kernel.org/r/1384852912-24791-1-git-send-email-alex.shi@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-19ftrace, perf: Avoid infinite event generation loopPeter Zijlstra
Vince's perf-trinity fuzzer found yet another 'interesting' problem. When we sample the irq_work_exit tracepoint with period==1 (or PERF_SAMPLE_PERIOD) and we add an fasync SIGNAL handler we create an infinite event generation loop: ,-> <IPI> | irq_work_exit() -> | trace_irq_work_exit() -> | ... | __perf_event_overflow() -> (due to fasync) | irq_work_queue() -> (irq_work_list must be empty) '--------- arch_irq_work_raise() Similar things can happen due to regular poll() wakeups if we exceed the ring-buffer wakeup watermark, or have an event_limit. To avoid this, dis-allow sampling this particular tracepoint. In order to achieve this, create a special perf_perm function pointer for each event and call this (when set) on trying to create a tracepoint perf event. [ roasted: use expr... to allow for ',' in your expression ] Reported-by: Vince Weaver <vincent.weaver@maine.edu> Tested-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Dave Jones <davej@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Link: http://lkml.kernel.org/r/20131114152304.GC5364@laptop.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-19UAPI: include <asm/byteorder.h> in linux/raid/md_p.hAurelien Jarno
linux/raid/md_p.h is using conditionals depending on endianess and fails with an error if neither of __BIG_ENDIAN, __LITTLE_ENDIAN or __BYTE_ORDER are defined, but it doesn't include any header which can define these constants. This make this header unusable alone. This patch adds a #include <asm/byteorder.h> at the beginning of this header to make it usable alone. This is needed to compile klibc on MIPS. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: NeilBrown <neilb@suse.de>
2013-11-18Merge branch 'i2c/for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c changes from Wolfram Sang: - new drivers for exynos5, bcm kona, and st micro - bigger overhauls for drivers mxs and rcar - typical driver bugfixes, cleanups, improvements - got rid of the superfluous 'driver' member in i2c_client struct This touches a few drivers in other subsystems. All acked. * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (38 commits) i2c: bcm-kona: fix error return code in bcm_kona_i2c_probe() i2c: i2c-eg20t: do not print error message in syslog if no ACK received i2c: bcm-kona: Introduce Broadcom I2C Driver i2c: cbus-gpio: Fix device tree binding i2c: wmt: add missing clk_disable_unprepare() on error i2c: designware: add new ACPI IDs i2c: i801: Add Device IDs for Intel Wildcat Point-LP PCH i2c: exynos5: Remove incorrect clk_disable_unprepare i2c: i2c-st: Add ST I2C controller i2c: exynos5: add High Speed I2C controller driver i2c: rcar: fixup rcar type naming i2c: scmi: remove some bogus NULL checks i2c: sh_mobile & rcar: Enable the driver on all ARM platforms i2c: sh_mobile: Convert to clk_prepare/unprepare i2c: mux: gpio: use reg value for i2c_add_mux_adapter i2c: mux: gpio: use gpio_set_value_cansleep() i2c: Include linux/of.h header i2c: mxs: Fix PIO mode on i.MX23 i2c: mxs: Rework the PIO mode operation i2c: mxs: distinguish i.MX23 and i.MX28 based I2C controller ...
2013-11-18Merge tag 'rdma-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband/rdma updates from Roland Dreier: - Re-enable flow steering verbs with new improved userspace ABI - Fixes for slow connection due to GID lookup scalability - IPoIB fixes - Many fixes to HW drivers including mlx4, mlx5, ocrdma and qib - Further improvements to SRP error handling - Add new transport type for Cisco usNIC * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (66 commits) IB/core: Re-enable create_flow/destroy_flow uverbs IB/core: extended command: an improved infrastructure for uverbs commands IB/core: Remove ib_uverbs_flow_spec structure from userspace IB/core: Use a common header for uverbs flow_specs IB/core: Make uverbs flow structure use names like verbs ones IB/core: Rename 'flow' structs to match other uverbs structs IB/core: clarify overflow/underflow checks on ib_create/destroy_flow IB/ucma: Convert use of typedef ctl_table to struct ctl_table IB/cm: Convert to using idr_alloc_cyclic() IB/mlx5: Fix page shift in create CQ for userspace IB/mlx4: Fix device max capabilities check IB/mlx5: Fix list_del of empty list IB/mlx5: Remove dead code IB/core: Encorce MR access rights rules on kernel consumers IB/mlx4: Fix endless loop in resize CQ RDMA/cma: Remove unused argument and minor dead code RDMA/ucma: Discard events for IDs not yet claimed by user space IB/core: Add Cisco usNIC rdma node and transport types RDMA/nes: Remove self-assignment from nes_query_qp() IB/srp: Report receive errors correctly ...
2013-11-18Merge tag 'for-v3.13' of git://git.infradead.org/battery-2.6Linus Torvalds
Pull battery updates from Anton Vorontsov: "Highlights: - A new driver for TI BQ24735 Battery Chargers, courtesy of NVidia. - Device tree bindings for TWL4030 chips. - Random fixes and cleanups" * tag 'for-v3.13' of git://git.infradead.org/battery-2.6: pm2301-charger: Remove unneeded NULL checks twl4030_charger: Add devicetree support power_supply: Fix documentation for TEMP_*ALERT* properties max17042_battery: Support regmap to access device's registers max17042_battery: Use SIMPLE_DEV_PM_OPS charger-manager : Replace kzalloc to devm_kzalloc and remove uneccessary code bq2415x_charger: Fix max battery regulation voltage tps65090-charger: Use "IS_ENABLED(CONFIG_OF)" for DT code tps65090-charger: Drop devm_free_irq of devm_ allocated irq power_supply: Add support for bq24735 charger pm2301-charger: Staticize pm2xxx_charger_die_therm_mngt pm2301-charger: Check return value of regulator_enable ab8500-charger: Remove redundant break ab8500-charger: Check return value of regulator_enable isp1704_charger: Fix driver to work with changes introduced in v3.5
2013-11-18Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: "This series include: - a new Remote Controller driver for ST SoC with the corresponding DT bindings - a new frontend (cx24117) - a new I2C camera flash driver (lm3560) - a new mem2mem driver for TI SoC (ti-vpe) - support for Raphael r828d added to r820t driver - some improvements on buffer allocation at VB2 core - usual driver fixes and improvements PS this time, we have a smaller number of patches. While it is hard to pinpoint to the reasons, I believe that it is mainly due to: 1) there are several patch series ready, but depending on DT review. I decided to grant some extra time for DT maintainers to look on it, as they're expecting to have more time with the changes agreed during ARM mini-summit and KS. If they can't review in time for 3.14, I'll review myself and apply for the next merge window. 2) I suspect that having both LinuxCon EU and LinuxCon NA happening during the same merge window affected the development productivity, as several core media developers participated on both events" * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (151 commits) [media] media: st-rc: Add ST remote control driver [media] gpio-ir-recv: Include linux/of.h header [media] tvp7002: Include linux/of.h header [media] tvp514x: Include linux/of.h header [media] ths8200: Include linux/of.h header [media] adv7343: Include linux/of.h header [media] v4l: Fix typo in v4l2_subdev_get_try_crop() [media] media: i2c: add driver for dual LED Flash, lm3560 [media] rtl28xxu: add 15f4:0131 Astrometa DVB-T2 [media] rtl28xxu: add RTL2832P + R828D support [media] rtl2832: add new tuner R828D [media] r820t: add support for R828D [media] media/i2c: ths8200: fix build failure with gcc 4.5.4 [media] Add support for KWorld UB435-Q V2 [media] staging/media: fix msi3101 build errors [media] ddbridge: Remove casting the return value which is a void pointer [media] ngene: Remove casting the return value which is a void pointer [media] dm1105: remove unneeded not-null test [media] sh_mobile_ceu_camera: remove deprecated IRQF_DISABLED [media] media: rcar_vin: Add preliminary r8a7790 support ...
2013-11-18Merge tag 'mmc-updates-for-3.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC updates from Chris Ball: "MMC highlights for 3.13: Core: - Improve runtime PM support, remove mmc_{suspend,resume}_host(). - Add MMC_CAP_RUNTIME_RESUME, for delaying MMC resume until we're outside of the resume sequence (in runtime_resume) to decrease system resume time. Drivers: - dw_mmc: Support HS200 mode. - sdhci-eshdc-imx: Support SD3.0 SDR clock tuning, DDR on IMX6. - sdhci-pci: Add support for Intel Clovertrail and Merrifield" * tag 'mmc-updates-for-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (108 commits) mmc: wbsd: Silence compiler warning mmc: core: Silence compiler warning in __mmc_switch mmc: sh_mmcif: Convert to clk_prepare|unprepare mmc: sh_mmcif: Convert to PM macros when defining dev_pm_ops mmc: dw_mmc: exynos: Revert the sdr_timing assignment mmc: sdhci: Avoid needless loop while handling SDIO interrupts in sdhci_irq mmc: core: Add MMC_CAP_RUNTIME_RESUME to resume at runtime_resume mmc: core: Improve runtime PM support during suspend/resume for sd/mmc mmc: core: Remove redundant mmc_power_up|off at runtime callbacks mmc: Don't force card to active state when entering suspend/shutdown MIPS: db1235: Don't use MMC_CLKGATE mmc: core: Remove deprecated mmc_suspend|resume_host APIs mmc: mmci: Move away from using deprecated APIs mmc: via-sdmmc: Move away from using deprecated APIs mmc: tmio: Move away from using deprecated APIs mmc: sh_mmcif: Move away from using deprecated APIs mmc: sdricoh_cs: Move away from using deprecated APIs mmc: rtsx: Remove redundant suspend and resume callbacks mmc: wbsd: Move away from using deprecated APIs mmc: pxamci: Remove redundant suspend and resume callbacks ...
2013-11-18drm/radeon/cik: Add macrotile mode array queryMichel Dänzer
This is required to properly calculate the tiling parameters in userspace. Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-18drm/ttm: Add a minimal prime implementation for ttm base objectsThomas Hellstrom
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
2013-11-18drm/ttm: Allow execbuf util reserves without ticketThomas Hellstrom
If no reservation ticket is given to the execbuf reservation utilities, try reservation with non-blocking semantics. This is intended for eviction paths that use the execbuf reservation utilities for convenience rather than for deadlock avoidance. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
2013-11-17Merge branches 'cma', 'cxgb4', 'flowsteer', 'ipoib', 'misc', 'mlx4', 'mlx5', ↵Roland Dreier
'nes', 'ocrdma', 'qib' and 'srp' into for-next
2013-11-17IB/core: Re-enable create_flow/destroy_flow uverbsMatan Barak
This commit reverts commit 7afbddfae993 ("IB/core: Temporarily disable create_flow/destroy_flow uverbs"). Since the uverbs extensions functionality was experimental for v3.12, this patch re-enables the support for them and flow-steering for v3.13. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-11-17IB/core: extended command: an improved infrastructure for uverbs commandsYann Droneaud
Commit 400dbc96583f ("IB/core: Infrastructure for extensible uverbs commands") added an infrastructure for extensible uverbs commands while later commit 436f2ad05a0b ("IB/core: Export ib_create/destroy_flow through uverbs") exported ib_create_flow()/ib_destroy_flow() functions using this new infrastructure. According to the commit 400dbc96583f, the purpose of this infrastructure is to support passing around provider (eg. hardware) specific buffers when userspace issue commands to the kernel, so that it would be possible to extend uverbs (eg. core) buffers independently from the provider buffers. But the new kernel command function prototypes were not modified to take advantage of this extension. This issue was exposed by Roland Dreier in a previous review[1]. So the following patch is an attempt to a revised extensible command infrastructure. This improved extensible command infrastructure distinguish between core (eg. legacy)'s command/response buffers from provider (eg. hardware)'s command/response buffers: each extended command implementing function is given a struct ib_udata to hold core (eg. uverbs) input and output buffers, and another struct ib_udata to hold the hw (eg. provider) input and output buffers. Having those buffers identified separately make it easier to increase one buffer to support extension without having to add some code to guess the exact size of each command/response parts: This should make the extended functions more reliable. Additionally, instead of relying on command identifier being greater than IB_USER_VERBS_CMD_THRESHOLD, the proposed infrastructure rely on unused bits in command field: on the 32 bits provided by command field, only 6 bits are really needed to encode the identifier of commands currently supported by the kernel. (Even using only 6 bits leaves room for about 23 new commands). So this patch makes use of some high order bits in command field to store flags, leaving enough room for more command identifiers than one will ever need (eg. 256). The new flags are used to specify if the command should be processed as an extended one or a legacy one. While designing the new command format, care was taken to make usage of flags itself extensible. Using high order bits of the commands field ensure that newer libibverbs on older kernel will properly fail when trying to call extended commands. On the other hand, older libibverbs on newer kernel will never be able to issue calls to extended commands. The extended command header includes the optional response pointer so that output buffer length and output buffer pointer are located together in the command, allowing proper parameters checking. This should make implementing functions easier and safer. Additionally the extended header ensure 64bits alignment, while making all sizes multiple of 8 bytes, extending the maximum buffer size: legacy extended Maximum command buffer: 256KBytes 1024KBytes (512KBytes + 512KBytes) Maximum response buffer: 256KBytes 1024KBytes (512KBytes + 512KBytes) For the purpose of doing proper buffer size accounting, the headers size are no more taken in account in "in_words". One of the odds of the current extensible infrastructure, reading twice the "legacy" command header, is fixed by removing the "legacy" command header from the extended command header: they are processed as two different parts of the command: memory is read once and information are not duplicated: it's making clear that's an extended command scheme and not a different command scheme. The proposed scheme will format input (command) and output (response) buffers this way: - command: legacy header + extended header + command data (core + hw): +----------------------------------------+ | flags | 00 00 | command | | in_words | out_words | +----------------------------------------+ | response | | response | | provider_in_words | provider_out_words | | padding | +----------------------------------------+ | | . <uverbs input> . . (in_words * 8) . | | +----------------------------------------+ | | . <provider input> . . (provider_in_words * 8) . | | +----------------------------------------+ - response, if present: +----------------------------------------+ | | . <uverbs output space> . . (out_words * 8) . | | +----------------------------------------+ | | . <provider output space> . . (provider_out_words * 8) . | | +----------------------------------------+ The overall design is to ensure that the extensible infrastructure is itself extensible while begin more reliable with more input and bound checking. Note: The unused field in the extended header would be perfect candidate to hold the command "comp_mask" (eg. bit field used to handle compatibility). This was suggested by Roland Dreier in a previous review[2]. But "comp_mask" field is likely to be present in the uverb input and/or provider input, likewise for the response, as noted by Matan Barak[3], so it doesn't make sense to put "comp_mask" in the header. [1]: http://marc.info/?i=CAL1RGDWxmM17W2o_era24A-TTDeKyoL6u3NRu_=t_dhV_ZA9MA@mail.gmail.com [2]: http://marc.info/?i=CAL1RGDXJtrc849M6_XNZT5xO1+ybKtLWGq6yg6LhoSsKpsmkYA@mail.gmail.com [3]: http://marc.info/?i=525C1149.6000701@mellanox.com Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Link: http://marc.info/?i=cover.1383773832.git.ydroneaud@opteya.com [ Convert "ret ? ret : 0" to the equivalent "ret". - Roland ] Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-11-17IB/core: Remove ib_uverbs_flow_spec structure from userspaceYann Droneaud
The structure holding any types of flow_spec is of no use to userspace. It would be wrong for userspace to do: struct ib_uverbs_flow_spec flow_spec; flow_spec.type = IB_FLOW_SPEC_TCP; flow_spec.size = sizeof(flow_spec); Instead, userspace should use the dedicated flow_spec structure for - Ethernet : struct ib_uverbs_flow_spec_eth, - IPv4 : struct ib_uverbs_flow_spec_ipv4, - TCP/UDP : struct ib_uverbs_flow_spec_tcp_udp. In other words, struct ib_uverbs_flow_spec is a "virtual" data structure that can only be use by the kernel as an alias to the other. Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Link: http://marc.info/?i=cover.1383773832.git.ydroneaud@opteya.com Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-11-17IB/core: Use a common header for uverbs flow_specsYann Droneaud
A common header will allows better checking of flow specs size, while ensuring strict alignment to 64 bits. Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Link: http://marc.info/?i=cover.1383773832.git.ydroneaud@opteya.com Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-11-17IB/core: Make uverbs flow structure use names like verbs onesYann Droneaud
This patch adds "flow" prefix to most of data structure added as part of commit 436f2ad05a0b ("IB/core: Export ib_create/destroy_flow through uverbs") to keep those names in sync with the data structures added in commit 319a441d1361 ("IB/core: Add receive flow steering support"). It's just a matter of translating 'ib_flow' to 'ib_uverbs_flow'. Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Link: http://marc.info/?i=cover.1383773832.git.ydroneaud@opteya.com Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-11-17IB/core: Rename 'flow' structs to match other uverbs structsYann Droneaud
Commit 436f2ad05a0b ("IB/core: Export ib_create/destroy_flow through uverbs") added public data structures to support receive flow steering. The new structs are not following the 'uverbs' pattern: they're lacking the common prefix 'ib_uverbs'. This patch replaces ib_kern prefix by ib_uverbs. Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Link: http://marc.info/?i=cover.1383773832.git.ydroneaud@opteya.com Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-11-17IB/core: clarify overflow/underflow checks on ib_create/destroy_flowMatan Barak
This patch fixes the following issues: 1. Unneeded checks were removed 2. Removed the fixed size out of flow_attr.size, thus simplifying the checks. 3. Remove a 32bit hole on 64bit systems with strict alignment in struct ib_kern_flow_att by adding a reserved field. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-11-16Merge tag 'trace-3.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing update from Steven Rostedt: "This batch of changes is mostly clean ups and small bug fixes. The only real feature that was added this release is from Namhyung Kim, who introduced "set_graph_notrace" filter that lets you run the function graph tracer and not trace particular functions and their call chain. Tom Zanussi added some updates to the ftrace multibuffer tracing that made it more consistent with the top level tracing. One of the fixes for perf function tracing required an API change in RCU; the addition of "rcu_is_watching()". As Paul McKenney is pushing that change in this release too, he gave me a branch that included all the changes to get that working, and I pulled that into my tree in order to complete the perf function tracing fix" * tag 'trace-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Add rcu annotation for syscall trace descriptors tracing: Do not use signed enums with unsigned long long in fgragh output tracing: Remove unused function ftrace_off_permanent() tracing: Do not assign filp->private_data to freed memory tracing: Add helper function tracing_is_disabled() tracing: Open tracer when ftrace_dump_on_oops is used tracing: Add support for SOFT_DISABLE to syscall events tracing: Make register/unregister_ftrace_command __init tracing: Update event filters for multibuffer recordmcount.pl: Add support for __fentry__ ftrace: Have control op function callback only trace when RCU is watching rcu: Do not trace rcu_is_watching() functions ftrace/x86: skip over the breakpoint for ftrace caller trace/trace_stat: use rbtree postorder iteration helper instead of opencoding ftrace: Add set_graph_notrace filter ftrace: Narrow down the protected area of graph_lock ftrace: Introduce struct ftrace_graph_data ftrace: Get rid of ftrace_graph_filter_enabled tracing: Fix potential out-of-bounds in trace_get_user() tracing: Show more exact help information about snapshot
2013-11-16Merge tag 'pwm/for-3.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm changes from Thierry Reding: "Mostly bug fixes and clean up. There is a new driver, which is actually moving a custom PWM driver from drivers/misc. The majority of the patches are enhancements to the device tree support in the pwm-backlight driver. Backlights can now additionally be powered using a regulator and enabled using a GPIO in addition to just the PWM input" * tag 'pwm/for-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (30 commits) Documentation/pwm: Update supported SoC name for pwm-samsung pwm: samsung: Fix kernel warning while unexporting a channel MAINTAINERS: Move PWM subsystem tree to kernel.org Documentation/pwm: Fix trivial typos pwm-backlight: Remove unused variable pwm_backlight: avoid short blank screen while doing hibernation pwm-backlight: Fix brightness adjustment pwm: add ep93xx PWM support pwm-backlight: Allow for non-increasing brightness levels pwm-backlight: Add power supply support pwm-backlight: Use new enable_gpio field unicore32: Initialize PWM backlight enable_gpio field ARM: shmobile: Initialize PWM backlight enable_gpio field ARM: SAMSUNG: Initialize PWM backlight enable_gpio field ARM: pxa: Initialize PWM backlight enable_gpio field ARM: OMAP: Initialize PWM backlight enable_gpio field pwm-backlight: Add optional enable GPIO pwm-backlight: Track enable state pwm-backlight: Refactor backlight power on/off pwm-backlight: Improve readability ...
2013-11-16Merge branch 'nfsd-next' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
Pull nfsd changes from Bruce Fields: "This includes miscellaneous bugfixes and cleanup and a performance fix for write-heavy NFSv4 workloads. (The most significant nfsd-relevant change this time is actually in the delegation patches that went through Viro, fixing a long-standing bug that can cause NFSv4 clients to miss updates made by non-nfs users of the filesystem. Those enable some followup nfsd patches which I have queued locally, but those can wait till 3.14)" * 'nfsd-next' of git://linux-nfs.org/~bfields/linux: (24 commits) nfsd: export proper maximum file size to the client nfsd4: improve write performance with better sendspace reservations svcrpc: remove an unnecessary assignment sunrpc: comment typo fix Revert "nfsd: remove_stid can be incorporated into nfs4_put_delegation" nfsd4: fix discarded security labels on setattr NFSD: Add support for NFS v4.2 operation checking nfsd4: nfsd_shutdown_net needs state lock NFSD: Combine decode operations for v4 and v4.1 nfsd: -EINVAL on invalid anonuid/gid instead of silent failure nfsd: return better errors to exportfs nfsd: fh_update should error out in unexpected cases nfsd4: need to destroy revoked delegations in destroy_client nfsd: no need to unhash_stid before free nfsd: remove_stid can be incorporated into nfs4_put_delegation nfsd: nfs4_open_delegation needs to remove_stid rather than unhash_stid nfsd: nfs4_free_stid nfsd: fix Kconfig syntax sunrpc: trim off EC bytes in GSSAPI v2 unwrap gss_krb5: document that we ignore sequence number ...