summaryrefslogtreecommitdiffstats
path: root/include
AgeCommit message (Collapse)Author
2012-09-26make get_file() return its argumentAl Viro
simplifies a bunch of callers... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-26new helper: daemonize_descriptors()Al Viro
descriptor-related parts of daemonize, done right. As the result we simplify the locking rules for ->files - we hold task_lock in *all* cases when we modify ->files. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-26new helper: iterate_fd()Al Viro
iterates through the opened files in given descriptor table, calling a supplied function; we stop once non-zero is returned. Callback gets struct file *, descriptor number and const void * argument passed to iterator. It is called with files->file_lock held, so it is not allowed to block. tty_io, netprio_cgroup and selinux flush_unauthorized_files() converted to its use. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-26make expand_files() and alloc_fd() staticAl Viro
no callers outside of fs/file.c left Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-26take __{set,clear}_{open_fd,close_on_exec}() into fs/file.cAl Viro
nobody uses those outside anymore. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-26new helper: replace_fd()Al Viro
analog of dup2(), except that it takes struct file * as source. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-26take purely descriptor-related stuff from fcntl.c to file.cAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-26take close-on-exec logics to fs/file.c, clean it up a bitAl Viro
... and add cond_resched() there, while we are at it. We can get large latencies as is... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-26take descriptor-related part of close() to file.cAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-26expose a low-level variant of fd_install() for binderAl Viro
Similar situation to that of __alloc_fd(); do not use unless you really have to. You should not touch any descriptor table other than your own; it's a sure sign of a really bad API design. As with __alloc_fd(), you *must* use a first-class reference to struct files_struct; something obtained by get_files_struct(some task) (let alone direct task->files) will not do. It must be either current->files, or obtained by get_files_struct(current) by the owner of that sucker and given to you. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-26move files_struct-related bits from kernel/exit.c to fs/file.cAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-26new helper: __alloc_fd()Al Viro
Essentially, alloc_fd() in a files_struct we own a reference to. Most of the time wanting to use it is a sign of lousy API design (such as android/binder). It's *not* a general-purpose interface; better that than open-coding its guts, but again, playing with other process' descriptor table is a sign of bad design. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-26make get_unused_fd_flags() a functionAl Viro
... and get_unused_fd() a macro around it Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-26unexport sock_map_fd(), switch to sock_alloc_file()Al Viro
Both modular callers of sock_map_fd() had been buggy; sctp one leaks descriptor and file if copy_to_user() fails, 9p one shouldn't be exposing file in the descriptor table at all. Switch both to sock_alloc_file(), export it, unexport sock_map_fd() and make it static. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-26Merge tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreamingLinus Torvalds
Pull c6x arch fixes from Mark Salter: - Add __NR_kcmp to generic syscall list - C6X: Use generic asm/barrier.h * tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming: syscalls: add __NR_kcmp syscall to generic unistd.h c6x: use asm-generic/barrier.h
2012-09-26device.h: Add missing inline to #ifndef CONFIG_PRINTK dev_vprintk_emitJoe Perches
Also add __printf() verification for format string. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-26tty/serial: Add kgdb_nmi driverAnton Vorontsov
This special driver makes it possible to temporary use NMI debugger port as a normal console by issuing 'nmi_console' command (assuming that the port is attached to KGDB). Unlike KDB's disable_nmi command, with this driver you are always able to go back to the debugger using KGDB escape sequence ($3#33). This is because this console driver processes the input in NMI context, and thus is able to intercept the magic sequence. Note that since the console interprets input and uses polling communication methods, for things like PPP it is still better to fully detach debugger port from the KGDB NMI (i.e. disable_nmi), and use raw console. Usually, to enter the debugger one have to type the magic sequence, so initially the kernel will print the following prompt on the NMI debugger console: Type $3#33 to enter the debugger> For convenience, there is a kgdb_fiq.knock kernel command line option, when set to 0, this turns the special command to just a return key press, so the kernel will be printing this: Hit <return> to enter the debugger> This is more convenient for long debugging sessions, although it makes nmi_console feature somewhat useless. And for the cases when NMI connected to a dedicated button, the knocking can be disabled altogether by setting kgdb_fiq.knock to -1. Suggested-by: Colin Cross <ccross@android.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Acked-by: Alan Cox <alan@linux.intel.com> Acked-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-26tty/serial/core: Introduce poll_init callbackAnton Vorontsov
It was noticed that polling drivers (like KGDB) are not able to use serial ports if the ports were not previously initialized via console. I.e. when booting with console=ttyAMA0 kgdboc=ttyAMA0, everything works fine, but with console=ttyFOO kgdboc=ttyAMA0, the kgdboc doesn't work. This is because we don't initialize the hardware. Calling ->startup() is not an option, because drivers request interrupts there, and drivers fail to handle situations when tty isn't opened with interrupts enabled. So, we have to implement a new callback (actually, tty_ops already have a similar callback), which does everything needed to initialize just the hardware. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-26Merge branch 'xenarm-for-linus' of ↵Konrad Rzeszutek Wilk
git://xenbits.xen.org/people/sstabellini/linux-pvhvm into stable/for-linus-3.7 * 'xenarm-for-linus' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm: arm: introduce a DTS for Xen unprivileged virtual machines MAINTAINERS: add myself as Xen ARM maintainer xen/arm: compile netback xen/arm: compile blkfront and blkback xen/arm: implement alloc/free_xenballooned_pages with alloc_pages/kfree xen/arm: receive Xen events on ARM xen/arm: initialize grant_table on ARM xen/arm: get privilege status xen/arm: introduce CONFIG_XEN on ARM xen: do not compile manage, balloon, pci, acpi, pcpu and cpu_hotplug on ARM xen/arm: Introduce xen_ulong_t for unsigned long xen/arm: Xen detection and shared_info page mapping docs: Xen ARM DT bindings xen/arm: empty implementation of grant_table arch specific functions xen/arm: sync_bitops xen/arm: page.h definitions xen/arm: hypercalls arm: initial Xen support Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-09-26kdb: Turn KGDB_KDB=n stubs into static inlinesAnton Vorontsov
This makes the stubs actually usable, since e.g. 'foo = kdb_register();' leads to build errors in !KGDB_KDB case. Plus, with static inlines we do type checking. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Acked-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-26kernel/debug: Mask KGDB NMI upon entryAnton Vorontsov
The new arch callback should manage NMIs that usually cause KGDB to enter. That is, not all NMIs should be enabled/disabled, but only those that issue kgdb_handle_exception(). We must mask it as serial-line interrupt can be used as an NMI, so if the original KGDB-entry cause was say a breakpoint, then every input to KDB console will cause KGDB to reenter, which we don't want. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Acked-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-26serial: set correct baud_base for EXSYS EX-41092 Dual 16950Flavio Leitner
Apparently the same card model has two IDs, so this patch complements the commit 39aced68d664291db3324d0fcf0985ab5626aac2 adding the missing one. Signed-off-by: Flavio Leitner <fbl@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-26[media] Add v4l2 subdev driver for S5K4ECGX sensorSangwook Lee
This patch adds driver for Samsung S5K4ECGX image sensor with an embedded SoC ISP. The driver only implements preview operation mode and still capture (snapshot) and face detection features are missing now. Following controls are supported: contrast, saturation, brightness, sharpness. Signed-off-by: Sangwook Lee <sangwook.lee@linaro.org> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-268250: blacklist Winbond CIR portSean Young
The legacy serial driver will detect the Winbond CIR device as a serial port, since it looks exactly like a serial port unless you know what it is from the PNP ID. Here we track this port as a special PORT_8250_CIR type, preventing the legacy serial driver from probing it. Signed-off-by: Sean Young <sean@mess.org> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-26syscalls: add __NR_kcmp syscall to generic unistd.hMark Salter
Commit d97b46a64 ("syscalls, x86: add __NR_kcmp syscall" ) added a new syscall to support checkpoint restore. It is currently x86-only, but that restriction will be removed in a subsequent patch. Unfortunately, the kernel checksyscalls script had a bug which suppressed any warning to other architectures that the kcmp syscall was not implemented. A patch to checksyscalls is being tested in linux-next and other architectures are seeing warnings about kcmp being unimplemented. This patch adds __NR_kcmp to <asm-generic/unistd.h> so that kcmp is wired in for architectures using the generic syscall list. Signed-off-by: Mark Salter <msalter@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-09-26[media] v4l2-dev: add new VFL_DIR_ definesHans Verkuil
These will be used by v4l2-dev.c to improve ioctl checking. I.e. ioctls for capture should return -ENOTTY when called for an output device. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26[media] v4l2: make vidioc_s_crop constHans Verkuil
Write-only ioctls should have a const argument in the ioctl op. Do this conversion for vidioc_s_crop. Adding const for write-only ioctls was decided during the 2012 Media Workshop. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26[media] v4l2: make vidioc_s_modulator constHans Verkuil
Write-only ioctls should have a const argument in the ioctl op. Do this conversion for vidioc_s_modulator. Adding const for write-only ioctls was decided during the 2012 Media Workshop. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26[media] v4l2: make vidioc_s_audout constHans Verkuil
Write-only ioctls should have a const argument in the ioctl op. Do this conversion for vidioc_s_audout. Adding const for write-only ioctls was decided during the 2012 Media Workshop. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26[media] v4l2: make vidioc_s_audio constHans Verkuil
Write-only ioctls should have a const argument in the ioctl op. Do this conversion for vidioc_s_audio. Adding const for write-only ioctls was decided during the 2012 Media Workshop. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26[media] v4l2: make vidioc_(un)subscribe_event constHans Verkuil
Write-only ioctls should have a const argument in the ioctl op. Do this conversion for vidioc_(un)subscribe_event. Adding const for write-only ioctls was decided during the 2012 Media Workshop. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26[media] v4l2: make vidioc_s_freq_hw_seek constHans Verkuil
Write-only ioctls should have a const argument in the ioctl op. Do this conversion for vidioc_s_freq_hw_seek. Adding const for write-only ioctls was decided during the 2012 Media Workshop. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26rcu: Switch task's syscall hooks on context switchFrederic Weisbecker
Clear the syscalls hook of a task when it's scheduled out so that if the task migrates, it doesn't run the syscall slow path on a CPU that might not need it. Also set the syscalls hook on the next task if needed. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Alessio Igor Bogani <abogani@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Avi Kivity <avi@redhat.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Christoph Lameter <cl@linux.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Gilad Ben Yossef <gilad@benyossef.com> Cc: Hakan Akkan <hakanakkan@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Kevin Hilman <khilman@ti.com> Cc: Max Krasnyansky <maxk@qualcomm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Sven-Thorsten Dietrich <thebigcorporation@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2012-09-26s390: add support for transactional memoryMartin Schwidefsky
Allow user-space processes to use transactional execution (TX). If the TX facility is available user space programs can use transactions for fine-grained serialization based on the data objects that are referenced during a transaction. This is useful for lockless data structures and speculative compiler optimizations. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26rcu: Settle config for userspace extended quiescent stateFrederic Weisbecker
Create a new config option under the RCU menu that put CPUs under RCU extended quiescent state (as in dynticks idle mode) when they run in userspace. This require some contribution from architectures to hook into kernel and userspace boundaries. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Alessio Igor Bogani <abogani@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Avi Kivity <avi@redhat.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Christoph Lameter <cl@linux.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Gilad Ben Yossef <gilad@benyossef.com> Cc: Hakan Akkan <hakanakkan@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Kevin Hilman <khilman@ti.com> Cc: Max Krasnyansky <maxk@qualcomm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Sven-Thorsten Dietrich <thebigcorporation@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2012-09-26rcu: New rcu_user_enter_after_irq() and rcu_user_exit_after_irq() APIsFrederic Weisbecker
In some cases, it is necessary to enter or exit userspace-RCU-idle mode from an interrupt handler, for example, if some other CPU sends this CPU a resched IPI. In this case, the current CPU would enter the IPI handler in userspace-RCU-idle mode, but would need to exit the IPI handler after having exited that mode. To allow this to work, this commit adds two new APIs to TREE_RCU: - rcu_user_enter_after_irq(). This must be called from an interrupt between rcu_irq_enter() and rcu_irq_exit(). After the irq calls rcu_irq_exit(), the irq handler will return into an RCU extended quiescent state. In theory, this interrupt is never a nested interrupt, but in practice it might interrupt softirq, which looks to RCU like a nested interrupt. - rcu_user_exit_after_irq(). This must be called from a non-nesting interrupt, interrupting an RCU extended quiescent state, also between rcu_irq_enter() and rcu_irq_exit(). After the irq calls rcu_irq_exit(), the irq handler will return in an RCU non-quiescent state. [ Combined with "Allow calls to rcu_exit_user_irq from nesting irqs." ] Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2012-09-26rcu: New rcu_user_enter() and rcu_user_exit() APIsFrederic Weisbecker
RCU currently insists that only idle tasks can enter RCU idle mode, which prohibits an adaptive tickless kernel (AKA nohz cpusets), which in turn would mean that usermode execution would always take scheduling-clock interrupts, even when there is only one task runnable on the CPU in question. This commit therefore adds rcu_user_enter() and rcu_user_exit(), which allow non-idle tasks to enter RCU idle mode. These are quite similar to rcu_idle_enter() and rcu_idle_exit(), respectively, except that they omit the idle-task checks. [ Updated to use "user" flag rather than separate check functions. ] [ paulmck: Updated to drop exports of new functions based on Josh's patch getting rid of the need for them. ] Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Alessio Igor Bogani <abogani@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Avi Kivity <avi@redhat.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Christoph Lameter <cl@linux.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Geoff Levand <geoff@infradead.org> Cc: Gilad Ben Yossef <gilad@benyossef.com> Cc: Hakan Akkan <hakanakkan@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kevin Hilman <khilman@ti.com> Cc: Max Krasnyansky <maxk@qualcomm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Sven-Thorsten Dietrich <thebigcorporation@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2012-09-26[media] v4l2: make vidioc_s_jpegcomp constHans Verkuil
Write-only ioctls should have a const argument in the ioctl op. Do this conversion for vidioc_s_jpegcomp. Adding const for write-only ioctls was decided during the 2012 Media Workshop. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26[media] v4l2: make vidioc_s_fbuf constHans Verkuil
Write-only ioctls should have a const argument in the ioctl op. Do this conversion for vidioc_s_fbuf. Adding const for write-only ioctls was decided during the 2012 Media Workshop. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26[media] Rename V4L2_(IN|OUT)_CAP_CUSTOM_TIMINGSHans Verkuil
The 'custom' timings are no longer just for custom timings, but also for standard CEA/VESA timings. So rename to V4L2_IN/OUT_CAP_DV_TIMINGS. The old define is still kept for backwards compatibility. This decision was taken during the 2012 Media Workshop. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26[media] v4l2-core: deprecate V4L2_BUF_TYPE_PRIVATEHans Verkuil
This buffer type isn't used at all, and since it is effectively undefined what it should do it is deprecated. The define still exists, but any internal support for such buffers is removed. The decisions to deprecate this was taken during the 2012 Media Workshop. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26[media] videodev2.h: split off controls into v4l2-controls.hHans Verkuil
During the 2012 Media Workshop it was decided to split off the control definitions into their own v4l2-controls.h header, included by videodev2.h. Because controls make up such a large part of V4L2 they made it hard to read videodev2.h. Splitting off the control definitions makes life easier. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26OMAPDSS: DISPC: Configure overlay-like parameters in dispc_wb_setupArchit Taneja
Create struct omap_dss_writeback_info, this is similar to omap_overlay_info, the major difference is that there is no parameter which describes the input size to writeback, this is because this is always fixed, and decided by the connected overlay or overlay manager. One more difference is that screen_width is renamed to buf_width, to give the value of stride the writeback buffer has. Call dispc_ovl_setup_common() through dispc_wb_setup() to configure overlay-like parameters. The parameters in dispc_ovl_setup_common() which do not hold for writeback are filled passed as zeroes or false, the code takes care of not configuring them as they won't possess the needed overlay caps. Signed-off-by: Archit Taneja <archit@ti.com>
2012-09-26OMAPDSS: OVERLAY: Add position and replication as overlay capsArchit Taneja
Add position and replication as overlay caps, and pass overlay caps as an argument to the corresponding functions. Adding position and replication to overlay caps seems a bit unnecessary, but it allows us to use the corresponding functions for writeback too. These caps will be set for all overlays, but not for writeback. This is done so writeback can reuse dispc_ovl_setup() to the maximum. Signed-off-by: Archit Taneja <archit@ti.com>
2012-09-26OMAPDSS: Remove old way of setting manager and device linksArchit Taneja
Now that an omap_dss_output can be used to link between managers and devices, we can remove the old way of setting manager and device links. This involves removing the device and manager pointers from omap_overlay_manager and omap_dss_device respectively, and removing the set_device/unset_device ops from omap_overlay_manager. Signed-off-by: Archit Taneja <archit@ti.com>
2012-09-26OMAPDSS: Remove manager->device referencesArchit Taneja
With the introduction of output entities, managers will now connect to outputs. Create helper ops for overlays and managers named get_device. This will abstract away the information on how to get the device from an overlay or an overlay manager. The get_device ops currently retrieve the output via a ovl->manager->device reference. This will be later replaced by ovl->manager->output->device references. Signed-off-by: Archit Taneja <archit@ti.com>
2012-09-26OMAPDSS: APPLY: Add manager set/unset output ops for omap_overlay_managerArchit Taneja
Add set_output/unset_output ops for overlay managers, these form links between managers and outputs. Create a function in dss features which tell all the output instances that connect to a manager, use it when a manager tries to set an output. Add a constraint of not unsetting an output when the manager is enabled. Keep the omap_dss_device pointer and set/unset_device ops in overlay_manager for now to not break things. Keep the dss feature function get_supported_displays as it's used in some places. These will be removed later. Signed-off-by: Archit Taneja <archit@ti.com>
2012-09-26ASoC: dapm: Allow regulators to bypass as well as disable when idleMark Brown
Allow regulators managed via DAPM to make use of the bypass support that has recently been added to the regulator API by setting a flag SND_SOC_DAPM_REGULATOR_BYPASS. When this flag is set the regulator will be put into bypass mode before being disabled, allowing the regulator to fall into bypass mode if it can't be disabled due to other users. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-26Merge tag 'bypass' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator into for-3.7 regulator: Bypass mode support Allow regulators to be put into a non-regulating mode bypassing the input straight to the output, mostly used by low power retention modes.
2012-09-26OMAPDSS: output: Add set/unset device ops for omap_dss_outputArchit Taneja
An output entity represented by the struct omap_dss_output connects to a omap_dss_device entity. Add functions to set or unset an output's device. This is similar to how managers and devices were connected previously. An output can connect to a device without being connected to a manager. However, the output needs to eventually connect to a manager so that the connected panel can be enabled. Keep the omap_overlay_manager pointer in omap_dss_device for now to prevent breaking things. This will be removed later when outputs are supported completely. Signed-off-by: Archit Taneja <archit@ti.com>