| Age | Commit message (Collapse) | Author |
|---|
|
This patch adds GRO support for IPv6. IPv6 GRO supports extension
headers in the same way as GSO (by using the same infrastructure).
It's also simpler compared to IPv4 since we no longer have to worry
about fragmentation attributes or header checksums.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The AF_CAN core delivered always cloned sk_buffs to the AF_CAN
protocols, although this was _only_ needed by the can-raw protocol.
With this (additionally documented) change, the AF_CAN core calls the
callback functions of the registered AF_CAN protocols with the original
(uncloned) sk_buff pointer and let's the can-raw protocol do the
skb_clone() itself which omits all unneeded skb_clone() calls for other
AF_CAN protocols.
Signed-off-by: Oliver Hartkopp <oliver@hartkopp.net>
Signed-off-by: Urs Thuermann <urs.thuermann@volkswagen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds GRO interfaces for hardware-assisted VLAN reception.
With this in place we're now at parity with LRO as far as the
interface is concerned. That is, you can now take any LRO driver
and convert it over to GRO.
As the CB memory clashes with GRO's use of CB, I've removed it
entirely by storing dev in skb->dev. This is OK because VLAN
gets called first thing in netif_receive_skb and skb->dev is
not used in between us calling netif_rx and netif_receive_skb
getting called.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Previously GRO's only entry point from the outside is through
napi_gro_receive and napi_gro_frags. These interfaces are for
device drivers.
This patch rearranges things to provide a new set of interfaces
for VLANs. These interfaces are for internal use only. The
VLAN code itself can then provide a set of entry points for
device drivers.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm:
dm snapshot: extend exception store functions
dm snapshot: split out exception store implementations
dm snapshot: rename struct exception_store
dm snapshot: separate out exception store interface
dm mpath: move trigger_event to system workqueue
dm: add name and uuid to sysfs
dm table: rework reference counting
dm: support barriers on simple devices
dm request: extend target interface
dm request: add caches
dm ioctl: allow dm_copy_name_and_uuid to return only one field
dm log: ensure log bitmap fits on log device
dm log: move region_size validation
dm log: avoid reinitialising io_req on every operation
dm: consolidate target deregistration error handling
dm raid1: fix error count
dm log: fix dm_io_client leak on error paths
dm snapshot: change yield to msleep
dm table: drop reference at unbind
|
|
Implement barrier support for single device DM devices
This patch implements barrier support in DM for the common case of dm linear
just remapping a single underlying device. In this case we can safely
pass the barrier through because there can be no reordering between
devices.
NB. Any DM device might cease to support barriers if it gets
reconfigured so code must continue to allow for a possible
-EOPNOTSUPP on every barrier bio submitted. - agk
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
|
|
This patch adds the following target interfaces for request-based dm.
map_rq : for mapping a request
rq_end_io : for finishing a request
busy : for avoiding performance regression from bio-based dm.
Target can tell dm core not to map requests now, and
that may help requests in the block layer queue to be
bigger by I/O merging.
In bio-based dm, this behavior is done by device
drivers managing the block layer queue.
But in request-based dm, dm core has to do that
since dm core manages the block layer queue.
Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
|
|
Change dm_unregister_target to return void and use BUG() for error
reporting.
dm_unregister_target can only fail because of programming bug in the
target driver. It can't fail because of user's behavior or disk errors.
This patch changes unregister_target to return void and use BUG if
someone tries to unregister non-registered target or unregister target
that is in use.
This patch removes code duplication (testing of error codes in all dm
targets) and reports bugs in just one place, in dm_unregister_target. In
some target drivers, these return codes were ignored, which could lead
to a situation where bugs could be missed.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
|
|
* 'for-next' of git://git.o-hand.com/linux-mfd: (30 commits)
mfd: Fix section mismatch in da903x
mfd: move drivers/i2c/chips/menelaus.c to drivers/mfd
mfd: move drivers/i2c/chips/tps65010.c to drivers/mfd
mfd: dm355evm msp430 driver
mfd: Add missing break from wm3850-core
mfd: Add WM8351 support
mfd: Support configurable numbers of DCDCs and ISINKs on WM8350
mfd: Handle missing WM8350 platform data
mfd: Add WM8352 support
mfd: Use irq_to_desc in twl4030 code
power_supply: Add Dialog DA9030 battery charger driver
mfd: Dialog DA9030 battery charger MFD driver
mfd: Register WM8400 codec device
mfd: Pass driver_data onto child devices
mfd: Fix twl4030-core.c build error
mfd: twl4030 regulator bug fixes
mfd: twl4030: create some regulator devices
mfd: twl4030: cleanup symbols and OMAP dependency
mfd: twl4030: simplified child creation code
power_supply: Add battery health reporting for WM8350
...
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
module: convert to stop_machine_create/destroy.
stop_machine: introduce stop_machine_create/destroy.
parisc: fix module loading failure of large kernel modules
module: fix module loading failure of large kernel modules for parisc
module: fix warning of unused function when !CONFIG_PROC_FS
kernel/module.c: compare symbol values when marking symbols as exported in /proc/kallsyms.
remove CONFIG_KMOD
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
swiotlb: Don't include linux/swiotlb.h twice in lib/swiotlb.c
intel-iommu: fix build error with INTR_REMAP=y and DMAR=n
swiotlb: add missing __init annotations
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (22 commits)
HID: fix error condition propagation in hid-sony driver
HID: fix reference count leak hidraw
HID: add proper support for pensketch 12x9 tablet
HID: don't allow DealExtreme usb-radio be handled by usb hid driver
HID: fix default Kconfig setting for TopSpeed driver
HID: driver for TopSeed Cyberlink quirky remote
HID: make boot protocol drivers depend on EMBEDDED
HID: avoid sparse warning in HID_COMPAT_LOAD_DRIVER
HID: hiddev cleanup -- handle all error conditions properly
HID: force feedback driver for GreenAsia 0x12 PID
HID: switch specialized drivers from "default y" to !EMBEDDED
HID: set proper dev.parent in hidraw
HID: add dynids facility
HID: use GFP_KERNEL in hid_alloc_buffers
HID: usbhid, use usb_endpoint_xfer_int
HID: move usbhid flags to usbhid.h
HID: add n-trig digitizer support
HID: add phys and name ioctls to hidraw
HID: struct device - replace bus_id with dev_name(), dev_set_name()
HID: automatically call usbhid_set_leds in usbhid driver
...
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw: (27 commits)
GFS2: Use DEFINE_SPINLOCK
GFS2: Fix use-after-free bug on umount (try #2)
Revert "GFS2: Fix use-after-free bug on umount"
GFS2: Streamline alloc calculations for writes
GFS2: Send useful information with uevent messages
GFS2: Fix use-after-free bug on umount
GFS2: Remove ancient, unused code
GFS2: Move four functions from super.c
GFS2: Fix bug in gfs2_lock_fs_check_clean()
GFS2: Send some sensible sysfs stuff
GFS2: Kill two daemons with one patch
GFS2: Move gfs2_recoverd into recovery.c
GFS2: Fix "truncate in progress" hang
GFS2: Clean up & move gfs2_quotad
GFS2: Add more detail to debugfs glock dumps
GFS2: Banish struct gfs2_rgrpd_host
GFS2: Move rg_free from gfs2_rgrpd_host to gfs2_rgrpd
GFS2: Move rg_igeneration into struct gfs2_rgrpd
GFS2: Banish struct gfs2_dinode_host
GFS2: Move i_size from gfs2_dinode_host and rename it to i_disksize
...
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (44 commits)
qlge: Fix sparse warnings for tx ring indexes.
qlge: Fix sparse warning regarding rx buffer queues.
qlge: Fix sparse endian warning in ql_hw_csum_setup().
qlge: Fix sparse endian warning for inbound packet control block flags.
qlge: Fix sparse warnings for byte swapping in qlge_ethool.c
myri10ge: print MAC and serial number on probe failure
pkt_sched: cls_u32: Fix locking in u32_change()
iucv: fix cpu hotplug
af_iucv: Free iucv path/socket in path_pending callback
af_iucv: avoid left over IUCV connections from failing connects
af_iucv: New error return codes for connect()
net/ehea: bitops work on unsigned longs
Revert "net: Fix for initial link state in 2.6.28"
tcp: Kill extraneous SPLICE_F_NONBLOCK checks.
tcp: don't mask EOF and socket errors on nonblocking splice receive
dccp: Integrate the TFRC library with DCCP
dccp: Clean up ccid.c after integration of CCID plugins
dccp: Lockless integration of CCID congestion-control plugins
qeth: get rid of extra argument after printk to dev_* conversion
qeth: No large send using EDDP for HiperSockets.
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
[CPUFREQ] Fix on resume, now preserves user policy min/max.
[CPUFREQ] Add Celeron Core support to p4-clockmod.
[CPUFREQ] add to speedstep-lib additional fsb values for core processors
[CPUFREQ] Disable sysfs ui for p4-clockmod.
[CPUFREQ] p4-clockmod: reduce noise
[CPUFREQ] clean up speedstep-centrino and reduce cpumask_t usage
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: (138 commits)
ocfs2: Access the right buffer_head in ocfs2_merge_rec_left.
ocfs2: use min_t in ocfs2_quota_read()
ocfs2: remove unneeded lvb casts
ocfs2: Add xattr support checking in init_security
ocfs2: alloc xattr bucket in ocfs2_xattr_set_handle
ocfs2: calculate and reserve credits for xattr value in mknod
ocfs2/xattr: fix credits calculation during index create
ocfs2/xattr: Always updating ctime during xattr set.
ocfs2/xattr: Remove extend_trans call and add its credits from the beginning
ocfs2/dlm: Fix race during lockres mastery
ocfs2/dlm: Fix race in adding/removing lockres' to/from the tracking list
ocfs2/dlm: Hold off sending lockres drop ref message while lockres is migrating
ocfs2/dlm: Clean up errors in dlm_proxy_ast_handler()
ocfs2/dlm: Fix a race between migrate request and exit domain
ocfs2: One more hamming code optimization.
ocfs2: Another hamming code optimization.
ocfs2: Don't hand-code xor in ocfs2_hamming_encode().
ocfs2: Enable metadata checksums.
ocfs2: Validate superblock with checksum and ecc.
ocfs2: Checksum and ECC for directory blocks.
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
inotify: fix type errors in interfaces
fix breakage in reiserfs_new_inode()
fix the treatment of jfs special inodes
vfs: remove duplicate code in get_fs_type()
add a vfs_fsync helper
sys_execve and sys_uselib do not call into fsnotify
zero i_uid/i_gid on inode allocation
inode->i_op is never NULL
ntfs: don't NULL i_op
isofs check for NULL ->i_op in root directory is dead code
affs: do not zero ->i_op
kill suid bit only for regular files
vfs: lseek(fd, 0, SEEK_CUR) race condition
|
|
An XFS workload showed up a bug in the lockless pagecache patch. Basically it
would go into an "infinite" loop, although it would sometimes be able to break
out of the loop! The reason is a missing compiler barrier in the "increment
reference count unless it was zero" case of the lockless pagecache protocol in
the gang lookup functions.
This would cause the compiler to use a cached value of struct page pointer to
retry the operation with, rather than reload it. So the page might have been
removed from pagecache and freed (refcount==0) but the lookup would not correctly
notice the page is no longer in pagecache, and keep attempting to increment the
refcount and failing, until the page gets reallocated for something else. This
isn't a data corruption because the condition will be detected if the page has
been reallocated. However it can result in a lockup.
Linus points out that ACCESS_ONCE is also required in that pointer load, even
if it's absence is not causing a bug on our particular build. The most general
way to solve this is just to put an rcu_dereference in radix_tree_deref_slot.
Assembly of find_get_pages,
before:
.L220:
movq (%rbx), %rax #* ivtmp.1162, tmp82
movq (%rax), %rdi #, prephitmp.1149
.L218:
testb $1, %dil #, prephitmp.1149
jne .L217 #,
testq %rdi, %rdi # prephitmp.1149
je .L203 #,
cmpq $-1, %rdi #, prephitmp.1149
je .L217 #,
movl 8(%rdi), %esi # <variable>._count.counter, c
testl %esi, %esi # c
je .L218 #,
after:
.L212:
movq (%rbx), %rax #* ivtmp.1109, tmp81
movq (%rax), %rdi #, ret
testb $1, %dil #, ret
jne .L211 #,
testq %rdi, %rdi # ret
je .L197 #,
cmpq $-1, %rdi #, ret
je .L211 #,
movl 8(%rdi), %esi # <variable>._count.counter, c
testl %esi, %esi # c
je .L212 #,
(notice the obvious infinite loop in the first example, if page->count remains 0)
Signed-off-by: Nick Piggin <npiggin@suse.de>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The problems lie in the types used for some inotify interfaces, both at the kernel level and at the glibc level. This mail addresses the kernel problem. I will follow up with some suggestions for glibc changes.
For the sys_inotify_rm_watch() interface, the type of the 'wd' argument is
currently 'u32', it should be '__s32' . That is Robert's suggestion, and
is consistent with the other declarations of watch descriptors in the
kernel source, in particular, the inotify_event structure in
include/linux/inotify.h:
struct inotify_event {
__s32 wd; /* watch descriptor */
__u32 mask; /* watch mask */
__u32 cookie; /* cookie to synchronize two events */
__u32 len; /* length (including nulls) of name */
char name[0]; /* stub for possible name */
};
The patch makes the changes needed for inotify_rm_watch().
Signed-off-by: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: Robert Love <rlove@google.com>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Ulrich Drepper <drepper@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Fsync currently has a fdatawrite/fdatawait pair around the method call,
and a mutex_lock/unlock of the inode mutex. All callers of fsync have
to duplicate this, but we have a few and most of them don't quite get
it right. This patch adds a new vfs_fsync that takes care of this.
It's a little more complicated as usual as ->fsync might get a NULL file
pointer and just a dentry from nfsd, but otherwise gets afile and we
want to take the mapping and file operations from it when it is there.
Notes on the fsync callers:
- ecryptfs wasn't calling filemap_fdatawrite / filemap_fdatawait on the
lower file
- coda wasn't calling filemap_fdatawrite / filemap_fdatawait on the host
file, and returning 0 when ->fsync was missing
- shm wasn't calling either filemap_fdatawrite / filemap_fdatawait nor
taking i_mutex. Now given that shared memory doesn't have disk
backing not doing anything in fsync seems fine and I left it out of
the vfs_fsync conversion for now, but in that case we might just
not pass it through to the lower file at all but just call the no-op
simple_sync_file directly.
[and now actually export vfs_fsync]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Filesystems often to do compute intensive operation on some
metadata. If this operation is repeated many times, it can be very
expensive. It would be much nicer if the operation could be performed
once before a buffer goes to disk.
This adds triggers to jbd2 buffer heads. Just before writing a metadata
buffer to the journal, jbd2 will optionally call a commit trigger associated
with the buffer. If the journal is aborted, an abort trigger will be
called on any dirty buffers as they are dropped from pending
transactions.
ocfs2 will use this feature.
Initially I tried to come up with a more generic trigger that could be
used for non-buffer-related events like transaction completion. It
doesn't tie nicely, because the information a buffer trigger needs
(specific to a journal_head) isn't the same as what a transaction
trigger needs (specific to a tranaction_t or perhaps journal_t). So I
implemented a buffer set, with the understanding that
journal/transaction wide triggers should be implemented separately.
There is only one trigger set allowed per buffer. I can't think of any
reason to attach more than one set. Contrast this with a journal or
transaction in which multiple places may want to watch the entire
transaction separately.
The trigger sets are considered static allocation from the jbd2
perspective. ocfs2 will just have one trigger set per block type,
setting the same set on every bh of the same type.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
These are default functions for creating and destroying quota structures
and they should be used from filesystems.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
Unexport header files dqblk_v[12].h since except for quota format ID they
don't contain information userspace should be interested in. Move ID
definitions to quota.h.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
Add this so that file systems using JBD2 can safely allocate unused b_state
bits.
In this case, we add it so that Ocfs2 can define a single bit for tracking
the validation state of a buffer.
Acked-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
OCFS2 needs to scan all active dquots once in a while and sync quota
information among cluster nodes. Provide a helper function for it so
that it does not have to reimplement internally a list which VFS
already has. Moreover this function is probably going to be useful
for other clustered filesystems if they decide to use VFS quotas.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
recovery
OCFS2 needs to peek whether quota structure is already in memory so
that it can avoid expensive cluster locking in that case. Similarly
when freeing dquots, it checks whether it is the last quota structure
user or not. Finally, it needs to get reference to dquot structure for
specified id and quota type when recovering quota file after crash.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
Increase reported version number of quota support since quota core has changed
significantly. Also remove __DQUOT_NUM_VERSION__ since nobody uses it.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
Quota in a clustered environment needs to synchronize quota information
among cluster nodes. This means we have to occasionally update some
information in dquot from disk / network. On the other hand we have to
be careful not to overwrite changes administrator did via SETQUOTA.
So indicate in dquot->dq_flags which entries have been set by SETQUOTA
and quota format can clear these flags when it properly propagated
the changes.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
For clustered filesystems, it can happen that space / inode usage goes
negative temporarily (because some node is allocating another node
is freeing and they are not completely in sync). So let quota code
allow this and change qsize_t so a signed type so that we don't
underflow the variables.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
Coming quota support for OCFS2 is going to need quite a bit
of additional per-sb quota information. Moreover having fs.h
include all the types needed for this structure would be a
pain in the a**. So remove the union from mem_dqinfo and add
a private pointer for filesystem's use.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
There is going to be a new version of quota format having 64-bit
quota limits and a new quota format for OCFS2. They are both
going to use the same tree structure as VFSv0 quota format. So
split out tree handling into a separate file and make size of
leaf blocks, amount of space usable in each block (needed for
checksumming) and structures contained in them configurable
so that the code can be shared.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
Since these include files are used only by implementation of quota formats,
there's no need to have them in include/linux/.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
If filesystem can handle quota files as system files hidden from users, we can
skip a lot of cache invalidation, syncing, inode flags setting etc. when
turning quotas on, off and quota_sync. Allow filesystem to indicate that it is
hiding quota files from users by DQUOT_QUOTA_SYS_FILE flag.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
Split DQUOT_USR_ENABLED (and DQUOT_GRP_ENABLED) into DQUOT_USR_USAGE_ENABLED
and DQUOT_USR_LIMITS_ENABLED. This way we are able to separately enable /
disable whether we should:
1) ignore quotas completely
2) just keep uptodate information about usage
3) actually enforce quota limits
This is going to be useful when quota is treated as filesystem metadata - we
then want to keep quota information uptodate all the time and just enable /
disable limits enforcement.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
Upto now, DQUOT_USR_SUSPENDED behaved like a state - i.e., either quota
was enabled or suspended or none. Now allowed states are 0, ENABLED,
ENABLED | SUSPENDED. This will be useful later when we implement separate
enabling of quota usage tracking and limits enforcement because we need to
keep track of a state which has been suspended.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
So far quota was fine with quota block limits and inode limits/numbers in
a 32-bit type. Now with rapid increase in storage sizes there are coming
requests to be able to handle quota limits above 4TB / more that 2^32 inodes.
So bump up sizes of types in mem_dqblk structure to 64-bits to be able to
handle this. Also update inode allocation / checking functions to use qsize_t
and make global structure keep quota limits in bytes so that things are
consistent.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
Some filesystems would like to keep private information together with each
dquot. Add callbacks alloc_dquot and destroy_dquot allowing filesystem to
allocate larger dquots from their private slab in a similar fashion we
currently allocate inodes.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
This patch implements the FIEMAP ioctl for GFS2. We can use the generic
code (aside from a lock order issue, solved as per Ted Tso's suggestion)
for which I've introduced a new variant of the generic function. We also
have one exception to deal with, namely stuffed files, so we do that
"by hand", setting all the required flags.
This has been tested with a modified (I could only find an old version) of
Eric's test program, and appears to work correctly.
This patch does not currently support FIEMAP of xattrs, but the plan is to add
that feature at some future point.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Theodore Tso <tytso@mit.edu>
Cc: Eric Sandeen <sandeen@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current
* 'audit.b61' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current:
audit: validate comparison operations, store them in sane form
clean up audit_rule_{add,del} a bit
make sure that filterkey of task,always rules is reported
audit rules ordering, part 2
fixing audit rule ordering mess, part 1
audit_update_lsm_rules() misses the audit_inode_hash[] ones
sanitize audit_log_capset()
sanitize audit_fd_pair()
sanitize audit_mq_open()
sanitize AUDIT_MQ_SENDRECV
sanitize audit_mq_notify()
sanitize audit_mq_getsetattr()
sanitize audit_ipc_set_perm()
sanitize audit_ipc_obj()
sanitize audit_socketcall
don't reallocate buffer in every audit_sockaddr()
|
|
This patch allows GRO to merge page frags (skb_shinfo(skb)->frags)
in one skb, rather than using the less efficient frag_list.
It also adds a new interface, napi_gro_frags to allow drivers
to inject page frags directly into the stack without allocating
an skb. This is intended to be the GRO equivalent for LRO's
lro_receive_frags interface.
The existing GSO interface can already handle page frags with
or without an appended frag_list so nothing needs to be changed
there.
The merging itself is rather simple. We store any new frag entries
after the last existing entry, without checking whether the first
new entry can be merged with the last existing entry. Making this
check would actually be easy but since no existing driver can
produce contiguous frags anyway it would just be mental masturbation.
If the total number of entries would exceed the capacity of a
single skb, we simply resort to using frag_list as we do now.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Thanks to excellent diagnosis by Eduard Guzovsky.
The core problem is that on a network with lots of active
multicast traffic, the neighbour cache can fill up. If
we try to allocate a new route and thus neighbour cache
entry, the bog-standard GC attempt the neighbour layer does
in ineffective because route entries hold a reference
to the existing neighbour entries and GC can only liberate
entries with no references.
IPV4 already has a way to handle this, by doing a route cache
GC in such situations (when neigh attach returns -ENOBUFS).
So simply mimick this on the ipv6 side.
Tested-by: Eduard Guzovsky <eguzovsky@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce stop_machine_create/destroy. With this interface subsystems
that need a non-failing stop_machine environment can create the
stop_machine machine threads before actually calling stop_machine.
When the threads aren't needed anymore they can be killed with
stop_machine_destroy again.
When stop_machine gets called and the threads aren't present they
will be created and destroyed automatically. This restores the old
behaviour of stop_machine.
This patch also converts cpu hotplug to the new interface since it
is special: cpu_down calls __stop_machine instead of stop_machine.
However the kstop threads will only be created when stop_machine
gets called.
Changing the code so that the threads would be created automatically
on __stop_machine is currently not possible: when __stop_machine gets
called we hold cpu_add_remove_lock, which is the same lock that
create_rt_workqueue would take. So the workqueue needs to be created
before the cpu hotplug code locks cpu_add_remove_lock.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
When creating the final layout of a kernel module in memory, allow the
module loader to reserve some additional memory in front of a given section.
This is currently only needed for the parisc port which needs to put the
stub entries there to fulfill the 17/22bit PCREL relocations with large
kernel modules like xfs.
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (renamed fn)
|
|
Add standard interfaces for alarm/update irqs enabling. Drivers are no
more required to implement equivalent ioctl code as rtc-dev will provide
it.
UIE emulation should now be handled correctly and will work even for those
RTC drivers who cannot be configured to do both UIE and AIE.
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Cc: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
With the write_begin/write_end aops, page_symlink was broken because it
could no longer pass a GFP_NOFS type mask into the point where the
allocations happened. They are done in write_begin, which would always
assume that the filesystem can be entered from reclaim. This bug could
cause filesystem deadlocks.
The funny thing with having a gfp_t mask there is that it doesn't really
allow the caller to arbitrarily tinker with the context in which it can be
called. It couldn't ever be GFP_ATOMIC, for example, because it needs to
take the page lock. The only thing any callers care about is __GFP_FS
anyway, so turn that into a single flag.
Add a new flag for write_begin, AOP_FLAG_NOFS. Filesystems can now act on
this flag in their write_begin function. Change __grab_cache_page to
accept a nofs argument as well, to honour that flag (while we're there,
change the name to grab_cache_page_write_begin which is more instructive
and does away with random leading underscores).
This is really a more flexible way to go in the end anyway -- if a
filesystem happens to want any extra allocations aside from the pagecache
ones in ints write_begin function, it may now use GFP_KERNEL (rather than
GFP_NOFS) for common case allocations (eg. ocfs2_alloc_write_ctxt, for a
random example).
[kosaki.motohiro@jp.fujitsu.com: fix ubifs]
[kosaki.motohiro@jp.fujitsu.com: fix fuse]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: <stable@kernel.org> [2.6.28.x]
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ Cleaned up the calling convention: just pass in the AOP flags
untouched to the grab_cache_page_write_begin() function. That
just simplifies everybody, and may even allow future expansion of the
logic. - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
As suggested by Andreas Dilger, introduce a bgl_lock_ptr() helper in
<linux/blockgroup_lock.h> and add separate sb_bgl_lock() helpers to
filesystem specific header files to break the hidden dependency to
struct ext[234]_sb_info.
Also, while at it, convert the macros to static inlines to try make up
for all the times I broke Andrew Morton's tree.
Acked-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Include header files as used/needed:
In file included from drivers/leds/leds-dac124s085.c:16:
include/linux/spi/spi.h:66: error: field 'dev' has incomplete type
include/linux/spi/spi.h: In function 'to_spi_device':
include/linux/spi/spi.h:100: warning: type defaults to 'int' in declaration of '__mptr'
...
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Don't store the field->op in the messy (and very inconvenient for e.g.
audit_comparator()) form; translate to dense set of values and do full
validation of userland-submitted value while we are at it.
->audit_init_rule() and ->audit_match_rule() get new values now; in-tree
instances updated.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Fix the actual rule listing; add per-type lists _not_ used for matching,
with all exit,... sitting on one such list. Simplifies "do something
for all rules" logics, while we are at it...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
