summaryrefslogtreecommitdiffstats
path: root/include
AgeCommit message (Collapse)Author
2012-02-20Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Assorted fixes, sat in -next for a week or so... * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: ocfs2: deal with wraparounds of i_nlink in ocfs2_rename() vfs: fix compat_sys_stat() handling of overflows in st_nlink quota: Fix deadlock with suspend and quotas vfs: Provide function to get superblock and wait for it to thaw vfs: fix panic in __d_lookup() with high dentry hashtable counts autofs4 - fix lockdep splat in autofs vfs: fix d_inode_lookup() dentry ref leak
2012-02-20Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2012-02-20digsig: changed type of the timestampDmitry Kasatkin
time_t was used in the signature and key packet headers, which is typedef of long and is different on 32 and 64 bit architectures. Signature and key format should be independent of architecture. Similar to GPG, I have changed the type to uint32_t. Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com> Signed-off-by: James Morris <jmorris@namei.org>
2012-02-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: sha512 - use standard ror64()
2012-02-16crypto: sha512 - use standard ror64()Alexey Dobriyan
Use standard ror64() instead of hand-written. There is no standard ror64, so create it. The difference is shift value being "unsigned int" instead of uint64_t (for which there is no reason). gcc starts to emit native ROR instructions which it doesn't do for some reason currently. This should make the code faster. Patch survives in-tree crypto test and ping flood with hmac(sha512) on. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-02-15dt: add empty of_find_compatible_node functionShawn Guo
Add empty of_find_compatible_node function for !CONFIG_OF build. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-02-15Bluetooth: Remove usage of __cancel_delayed_work()Ulisses Furquim
__cancel_delayed_work() is being used in some paths where we cannot sleep waiting for the delayed work to finish. However, that function might return while the timer is running and the work will be queued again. Replace the calls with safer cancel_delayed_work() version which spins until the timer handler finishes on other CPUs and cancels the delayed work. Signed-off-by: Ulisses Furquim <ulisses@profusion.mobi> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-15Bluetooth: Fix potential deadlockAndre Guedes
We don't need to use the _sync variant in hci_conn_hold and hci_conn_put to cancel conn->disc_work delayed work. This way we avoid potential deadlocks like this one reported by lockdep. ====================================================== [ INFO: possible circular locking dependency detected ] 3.2.0+ #1 Not tainted ------------------------------------------------------- kworker/u:1/17 is trying to acquire lock: (&hdev->lock){+.+.+.}, at: [<ffffffffa0041155>] hci_conn_timeout+0x62/0x158 [bluetooth] but task is already holding lock: ((&(&conn->disc_work)->work)){+.+...}, at: [<ffffffff81035751>] process_one_work+0x11a/0x2bf which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 ((&(&conn->disc_work)->work)){+.+...}: [<ffffffff81057444>] lock_acquire+0x8a/0xa7 [<ffffffff81034ed1>] wait_on_work+0x3d/0xaa [<ffffffff81035b54>] __cancel_work_timer+0xac/0xef [<ffffffff81035ba4>] cancel_delayed_work_sync+0xd/0xf [<ffffffffa00554b0>] smp_chan_create+0xde/0xe6 [bluetooth] [<ffffffffa0056160>] smp_conn_security+0xa3/0x12d [bluetooth] [<ffffffffa0053640>] l2cap_connect_cfm+0x237/0x2e8 [bluetooth] [<ffffffffa004239c>] hci_proto_connect_cfm+0x2d/0x6f [bluetooth] [<ffffffffa0046ea5>] hci_event_packet+0x29d1/0x2d60 [bluetooth] [<ffffffffa003dde3>] hci_rx_work+0xd0/0x2e1 [bluetooth] [<ffffffff810357af>] process_one_work+0x178/0x2bf [<ffffffff81036178>] worker_thread+0xce/0x152 [<ffffffff81039a03>] kthread+0x95/0x9d [<ffffffff812e7754>] kernel_thread_helper+0x4/0x10 -> #1 (slock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+...}: [<ffffffff81057444>] lock_acquire+0x8a/0xa7 [<ffffffff812e553a>] _raw_spin_lock_bh+0x36/0x6a [<ffffffff81244d56>] lock_sock_nested+0x24/0x7f [<ffffffffa004d96f>] lock_sock+0xb/0xd [bluetooth] [<ffffffffa0052906>] l2cap_chan_connect+0xa9/0x26f [bluetooth] [<ffffffffa00545f8>] l2cap_sock_connect+0xb3/0xff [bluetooth] [<ffffffff81243b48>] sys_connect+0x69/0x8a [<ffffffff812e6579>] system_call_fastpath+0x16/0x1b -> #0 (&hdev->lock){+.+.+.}: [<ffffffff81056d06>] __lock_acquire+0xa80/0xd74 [<ffffffff81057444>] lock_acquire+0x8a/0xa7 [<ffffffff812e3870>] __mutex_lock_common+0x48/0x38e [<ffffffff812e3c75>] mutex_lock_nested+0x2a/0x31 [<ffffffffa0041155>] hci_conn_timeout+0x62/0x158 [bluetooth] [<ffffffff810357af>] process_one_work+0x178/0x2bf [<ffffffff81036178>] worker_thread+0xce/0x152 [<ffffffff81039a03>] kthread+0x95/0x9d [<ffffffff812e7754>] kernel_thread_helper+0x4/0x10 other info that might help us debug this: Chain exists of: &hdev->lock --> slock-AF_BLUETOOTH-BTPROTO_L2CAP --> (&(&conn->disc_work)->work) Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock((&(&conn->disc_work)->work)); lock(slock-AF_BLUETOOTH-BTPROTO_L2CAP); lock((&(&conn->disc_work)->work)); lock(&hdev->lock); *** DEADLOCK *** 2 locks held by kworker/u:1/17: #0: (hdev->name){.+.+.+}, at: [<ffffffff81035751>] process_one_work+0x11a/0x2bf #1: ((&(&conn->disc_work)->work)){+.+...}, at: [<ffffffff81035751>] process_one_work+0x11a/0x2bf stack backtrace: Pid: 17, comm: kworker/u:1 Not tainted 3.2.0+ #1 Call Trace: [<ffffffff812e06c6>] print_circular_bug+0x1f8/0x209 [<ffffffff81056d06>] __lock_acquire+0xa80/0xd74 [<ffffffff81021ef2>] ? arch_local_irq_restore+0x6/0xd [<ffffffff81022bc7>] ? vprintk+0x3f9/0x41e [<ffffffff81057444>] lock_acquire+0x8a/0xa7 [<ffffffffa0041155>] ? hci_conn_timeout+0x62/0x158 [bluetooth] [<ffffffff812e3870>] __mutex_lock_common+0x48/0x38e [<ffffffffa0041155>] ? hci_conn_timeout+0x62/0x158 [bluetooth] [<ffffffff81190fd6>] ? __dynamic_pr_debug+0x6d/0x6f [<ffffffffa0041155>] ? hci_conn_timeout+0x62/0x158 [bluetooth] [<ffffffff8105320f>] ? trace_hardirqs_off+0xd/0xf [<ffffffff812e3c75>] mutex_lock_nested+0x2a/0x31 [<ffffffffa0041155>] hci_conn_timeout+0x62/0x158 [bluetooth] [<ffffffff810357af>] process_one_work+0x178/0x2bf [<ffffffff81035751>] ? process_one_work+0x11a/0x2bf [<ffffffff81055af3>] ? lock_acquired+0x1d0/0x1df [<ffffffffa00410f3>] ? hci_acl_disconn+0x65/0x65 [bluetooth] [<ffffffff81036178>] worker_thread+0xce/0x152 [<ffffffff810407ed>] ? finish_task_switch+0x45/0xc5 [<ffffffff810360aa>] ? manage_workers.isra.25+0x16a/0x16a [<ffffffff81039a03>] kthread+0x95/0x9d [<ffffffff812e7754>] kernel_thread_helper+0x4/0x10 [<ffffffff812e5db4>] ? retint_restore_args+0x13/0x13 [<ffffffff8103996e>] ? __init_kthread_worker+0x55/0x55 [<ffffffff812e7750>] ? gs_change+0x13/0x13 Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Reviewed-by: Ulisses Furquim <ulisses@profusion.mobi> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-15Bluetooth: silence lockdep warningOctavian Purdila
Since bluetooth uses multiple protocols types, to avoid lockdep warnings, we need to use different lockdep classes (one for each protocol type). This is already done in bt_sock_create but it misses a couple of cases when new connections are created. This patch corrects that to fix the following warning: <4>[ 1864.732366] ======================================================= <4>[ 1864.733030] [ INFO: possible circular locking dependency detected ] <4>[ 1864.733544] 3.0.16-mid3-00007-gc9a0f62 #3 <4>[ 1864.733883] ------------------------------------------------------- <4>[ 1864.734408] t.android.btclc/4204 is trying to acquire lock: <4>[ 1864.734869] (rfcomm_mutex){+.+.+.}, at: [<c14970ea>] rfcomm_dlc_close+0x15/0x30 <4>[ 1864.735541] <4>[ 1864.735549] but task is already holding lock: <4>[ 1864.736045] (sk_lock-AF_BLUETOOTH){+.+.+.}, at: [<c1498bf7>] lock_sock+0xa/0xc <4>[ 1864.736732] <4>[ 1864.736740] which lock already depends on the new lock. <4>[ 1864.736750] <4>[ 1864.737428] <4>[ 1864.737437] the existing dependency chain (in reverse order) is: <4>[ 1864.738016] <4>[ 1864.738023] -> #1 (sk_lock-AF_BLUETOOTH){+.+.+.}: <4>[ 1864.738549] [<c1062273>] lock_acquire+0x104/0x140 <4>[ 1864.738977] [<c13d35c1>] lock_sock_nested+0x58/0x68 <4>[ 1864.739411] [<c1493c33>] l2cap_sock_sendmsg+0x3e/0x76 <4>[ 1864.739858] [<c13d06c3>] __sock_sendmsg+0x50/0x59 <4>[ 1864.740279] [<c13d0ea2>] sock_sendmsg+0x94/0xa8 <4>[ 1864.740687] [<c13d0ede>] kernel_sendmsg+0x28/0x37 <4>[ 1864.741106] [<c14969ca>] rfcomm_send_frame+0x30/0x38 <4>[ 1864.741542] [<c1496a2a>] rfcomm_send_ua+0x58/0x5a <4>[ 1864.741959] [<c1498447>] rfcomm_run+0x441/0xb52 <4>[ 1864.742365] [<c104f095>] kthread+0x63/0x68 <4>[ 1864.742742] [<c14d5182>] kernel_thread_helper+0x6/0xd <4>[ 1864.743187] <4>[ 1864.743193] -> #0 (rfcomm_mutex){+.+.+.}: <4>[ 1864.743667] [<c1061ada>] __lock_acquire+0x988/0xc00 <4>[ 1864.744100] [<c1062273>] lock_acquire+0x104/0x140 <4>[ 1864.744519] [<c14d2c70>] __mutex_lock_common+0x3b/0x33f <4>[ 1864.744975] [<c14d303e>] mutex_lock_nested+0x2d/0x36 <4>[ 1864.745412] [<c14970ea>] rfcomm_dlc_close+0x15/0x30 <4>[ 1864.745842] [<c14990d9>] __rfcomm_sock_close+0x5f/0x6b <4>[ 1864.746288] [<c1499114>] rfcomm_sock_shutdown+0x2f/0x62 <4>[ 1864.746737] [<c13d275d>] sys_socketcall+0x1db/0x422 <4>[ 1864.747165] [<c14d42f0>] syscall_call+0x7/0xb Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-15Bluetooth: Fix using an absolute timeout on hci_conn_put()Vinicius Costa Gomes
queue_delayed_work() expects a relative time for when that work should be scheduled. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-15Bluetooth: l2cap_set_timer needs jiffies as timeout valueAndrzej Kaczmarek
After moving L2CAP timers to workqueues l2cap_set_timer expects timeout value to be specified in jiffies but constants defined in miliseconds are used. This makes timeouts unreliable when CONFIG_HZ is not set to 1000. __set_chan_timer macro still uses jiffies as input to avoid multiple conversions from/to jiffies for sk_sndtimeo value which is already specified in jiffies. Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@tieto.com> Ackec-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-15Bluetooth: Remove bogus inline declaration from l2cap_chan_connectJohan Hedberg
As reported by Dan Carpenter this function causes a Sparse warning and shouldn't be declared inline: include/net/bluetooth/l2cap.h:837:30 error: marked inline, but without a definition" Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-15drm/exynos: exynos_drm.h header file fixesKamil Debski
First of all #ifdef __KERNEL__ was added to exynos_drm.h to mark the part that should be left out of userspace. Secondly exynos_drm.h was added to include/drm/Kbuild, so it will be included when doing make headers_install. Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-02-15drm/exynos: added panel physical size.Eun-Chul Kim
Signed-off-by: Eun-Chul Kim <chulspro.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-02-13vfs: Provide function to get superblock and wait for it to thawJan Kara
In quota code we need to find a superblock corresponding to a device and wait for superblock to be unfrozen. However this waiting has to happen without s_umount semaphore because that is required for superblock to thaw. So provide a function in VFS for this to keep dances with s_umount where they belong. [AV: implementation switched to saner variant] Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-02-13mmc: dw_mmc: Fix PIO mode with support of highmemSeungwon Jeon
Current PIO mode makes a kernel crash with CONFIG_HIGHMEM. Highmem pages have a NULL from sg_virt(sg). This patch fixes the following problem. Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: Oops: 817 [#1] PREEMPT SMP Modules linked in: CPU: 0 Not tainted (3.0.15-01423-gdbf465f #589) PC is at dw_mci_pull_data32+0x4c/0x9c LR is at dw_mci_read_data_pio+0x54/0x1f0 pc : [<c0358824>] lr : [<c035988c>] psr: 20000193 sp : c0619d48 ip : c0619d70 fp : c0619d6c r10: 00000000 r9 : 00000002 r8 : 00001000 r7 : 00000200 r6 : 00000000 r5 : e1dd3100 r4 : 00000000 r3 : 65622023 r2 : 0000007f r1 : eeb96000 r0 : e1dd3100 Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment xkernel Control: 10c5387d Table: 61e2004a DAC: 00000015 Process swapper (pid: 0, stack limit = 0xc06182f0) Stack: (0xc0619d48 to 0xc061a000) 9d40: e1dd3100 e1a4f000 00000000 e1dd3100 e1a4f000 00000200 9d60: c0619da4 c0619d70 c035988c c03587e4 c0619d9c e18158f4 e1dd3100 e1dd3100 9d80: 00000020 00000000 00000000 00000020 c06e8a84 00000000 c0619e04 c0619da8 9da0: c0359b24 c0359844 e18158f4 e1dd3164 e1dd3168 e1dd3150 3d02fc79 e1dd3154 9dc0: e1dd3178 00000000 00000020 00000000 e1dd3150 00000000 c10dd7e8 e1a84900 9de0: c061e7cc 00000000 00000000 0000008d c06e8a84 c061e780 c0619e4c c0619e08 9e00: c00c4738 c0359a34 3d02fc79 00000000 c0619e4c c05a1698 c05a1670 c05a165c 9e20: c04de8b0 c061e780 c061e7cc e1a84900 ffffed68 0000008d c0618000 00000000 9e40: c0619e6c c0619e50 c00c48b4 c00c46c8 c061e780 c00423ac c061e7cc ffffed68 9e60: c0619e8c c0619e70 c00c7358 c00c487c 0000008d ffffee38 c0618000 ffffed68 9e80: c0619ea4 c0619e90 c00c4258 c00c72b0 c00423ac ffffee38 c0619ecc c0619ea8 9ea0: c004241c c00c4234 ffffffff f8810000 0000006d 00000002 00000001 7fffffff 9ec0: c0619f44 c0619ed0 c0048bc0 c00423c4 220ae7a9 00000000 386f0d30 0005d3a4 9ee0: c00423ac c10dd0b8 c06f2cd8 c0618000 c0594778 c003a674 7fffffff c0619f44 9f00: 386f0d30 c0619f18 c00a6f94 c005be3c 80000013 ffffffff 386f0d30 0005d3a4 9f20: 386f0d30 0005d2d1 c10dd0a8 c10dd0b8 c06f2cd8 c0618000 c0619f74 c0619f48 9f40: c0345858 c005be00 c00a2440 c0618000 c0618000 c00410d8 c06c1944 c00410fc 9f60: c0594778 c003a674 c0619f9c c0619f78 c004a7e8 c03457b4 c0618000 c06c18f8 9f80: 00000000 c0039c70 c06c18d4 c003a674 c0619fb4 c0619fa0 c04ceafc c004a714 9fa0: c06287b4 c06c18f8 c0619ff4 c0619fb8 c0008b68 c04cea68 c0008578 00000000 9fc0: 00000000 c003a674 00000000 10c5387d c0628658 c003aa78 c062f1c4 4000406a 9fe0: 413fc090 00000000 00000000 c0619ff8 40008044 c0008858 00000000 00000000 Backtrace: [<c03587d8>] (dw_mci_pull_data32+0x0/0x9c) from [<c035988c>] (dw_mci_read_data_pio+0x54/0x1f0) r6:00000200 r5:e1a4f000 r4:e1dd3100 [<c0359838>] (dw_mci_read_data_pio+0x0/0x1f0) from [<c0359b24>] (dw_mci_interrupt+0xfc/0x4a4) [<c0359a28>] (dw_mci_interrupt+0x0/0x4a4) from [<c00c4738>] (handle_irq_event_percpu+0x7c/0x1b4) [<c00c46bc>] (handle_irq_event_percpu+0x0/0x1b4) from [<c00c48b4>] (handle_irq_event+0x44/0x64) [<c00c4870>] (handle_irq_event+0x0/0x64) from [<c00c7358>] (handle_fasteoi_irq+0xb4/0x124) r7:ffffed68 r6:c061e7cc r5:c00423ac r4:c061e780 [<c00c72a4>] (handle_fasteoi_irq+0x0/0x124) from [<c00c4258>] (generic_handle_irq+0x30/0x38) r7:ffffed68 r6:c0618000 r5:ffffee38 r4:0000008d [<c00c4228>] (generic_handle_irq+0x0/0x38) from [<c004241c>] (asm_do_IRQ+0x64/0xe0) r5:ffffee38 r4:c00423ac [<c00423b8>] (asm_do_IRQ+0x0/0xe0) from [<c0048bc0>] (__irq_svc+0x80/0x14c) Exception stack(0xc0619ed0 to 0xc0619f18) Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Acked-by: Will Newton <will.newton@imgtec.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-02-13mmc: core: Fix PowerOff Notify suspend/resumeGirish K S
Modified the mmc_poweroff to resume before sending the poweroff notification command. In sleep mode only AWAKE and RESET commands are allowed, so before sending the poweroff notification command resume from sleep mode and then send the notification command. PowerOff Notify is tested on a Synopsis Designware Host Controller (eMMC 4.5). The suspend to RAM and resume works fine. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Tested-by: Girish K S <girish.shivananjappa@linaro.org> Reviewed-by: Saugata Das <saugata.das@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-02-13mmc: core: add the capability for broken voltageJaehoon Chung
There is an understood mismatch between the voltage the host controller is set to and the voltage supplied to the card by a fixed voltage regulator. Teaching the driver to accept the mismatch is overly complicated. Instead just accept the regulator's voltage. This patch adds MMC_CAP2_BROKEN_VOLTAGE. If the voltage didn't satisfy between min_uV and max_uV, try to change the voltage in core.c. When changing the voltage, maybe use regulator_set_voltage(). In regulator_set_voltage(), check the below condition. /* sanity check */ if (!rdev->desc->ops->set_voltage && !rdev->desc->ops->set_voltage_sel) { ret = -EINVAL; goto out; } If some board should use the fixed-regulator, always return -EINVAL. Then, eMMC didn't initialize always. So if use a fixed-regulator, we need to add the MMC_CAP2_BROKEN_VOLTAGE. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-02-13mmc: core: Ensure clocks are always enabled before host interactionSujit Reddy Thumma
Ensure clocks are always enabled before any interaction with the host controller driver. This makes sure that there is no race between host execution and the core layer turning off clocks in different context with clock gating framework. Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Per Forlin <per.forlin@stericsson.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-02-11Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
Says Jens: "Time to push off some of the pending items. I really wanted to wait until we had the regression nailed, but alas it's not quite there yet. But I'm very confident that it's "just" a missing expire on exit, so fix from Tejun should be fairly trivial. I'm headed out for a week on the slopes. - Killing the barrier part of mtip32xx. It doesn't really support barriers, and it doesn't need them (writes are fully ordered). - A few fixes from Dan Carpenter, preventing overflows of integer multiplication. - A fixup for loop, fixing a previous commit that didn't quite solve the partial read problem from Dave Young. - A bio integer overflow fix from Kent Overstreet. - Improvement/fix of the door "keep locked" part of the cdrom shared code from Paolo Benzini. - A few cfq fixes from Shaohua Li. - A fix for bsg sysfs warning when removing a file it did not create from Stanislaw Gruszka. - Two fixes for floppy from Vivek, preventing a crash. - A few block core fixes from Tejun. One killing the over-optimized ioc exit path, cleaning that up nicely. Two others fixing an oops on elevator switch, due to calling into the scheduler merge check code without holding the queue lock." * 'for-linus' of git://git.kernel.dk/linux-block: block: fix lockdep warning on io_context release put_io_context() relay: prevent integer overflow in relay_open() loop: zero fill bio instead of return -EIO for partial read bio: don't overflow in bio_get_nr_vecs() floppy: Fix a crash during rmmod floppy: Cleanup disk->queue before caling put_disk() if add_disk() was never called cdrom: move shared static to cdrom_device_info bsg: fix sysfs link remove warning block: don't call elevator callbacks for plug merges block: separate out blk_rq_merge_ok() and blk_try_merge() from elevator functions mtip32xx: removed the irrelevant argument of mtip_hw_submit_io() and the unused member of struct driver_data block: strip out locking optimization in put_io_context() cdrom: use copy_to_user() without the underscores block: fix ioc locking warning block: fix NULL icq_cache reference block,cfq: change code order
2012-02-10USB: Remove duplicate USB 3.0 hub feature #defines.Sarah Sharp
Somehow we ended up with duplicate hub feature #defines in ch11.h. Tatyana Brokhman first created the USB 3.0 hub feature macros in 2.6.38 with commit 0eadcc09203349b11ca477ec367079b23d32ab91 "usb: USB3.0 ch11 definitions". In 2.6.39, I modified a patch from John Youn that added similar macros in a different place in the same file, and committed dbe79bbe9dcb22cb3651c46f18943477141ca452 "USB 3.0 Hub Changes". Some of the #defines used different names for the same values. Others used exactly the same names with the same values, like these gems: #define USB_PORT_FEAT_BH_PORT_RESET 28 ... #define USB_PORT_FEAT_BH_PORT_RESET 28 According to my very geeky husband (who looked it up in the C99 spec), it is allowed to have object-like macros with duplicate names as long as the replacement list is exactly the same. However, he recalled that some compilers will give warnings when they find duplicate macros. It's probably best to remove the duplicates in the stable tree, so that the code compiles for everyone. The macros are now fixed to move the feature requests that are specific to USB 3.0 hubs into a new section (out of the USB 2.0 hub feature section), and use the most common macro name. This patch should be backported to 2.6.39. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Tatyana Brokhman <tlinder@codeaurora.org> Cc: John Youn <johnyoun@synopsys.com> Cc: Jamey Sharp <jamey@minilop.net> Cc: stable@vger.kernel.org
2012-02-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Quoth David: 1) GRO MAC header comparisons were ethernet specific, breaking other link types. This required a multi-faceted fix to cure the originally noted case (Infiniband), because IPoIB was lying about it's actual hard header length. Thanks to Eric Dumazet, Roland Dreier, and others. 2) Fix build failure when INET_UDP_DIAG is built in and ipv6 is modular. From Anisse Astier. 3) Off by ones and other bug fixes in netprio_cgroup from Neil Horman. 4) ipv4 TCP reset generation needs to respect any network interface binding from the socket, otherwise route lookups might give a different result than all the other segments received. From Shawn Lu. 5) Fix unintended regression in ipv4 proxy ARP responses, from Thomas Graf. 6) Fix SKB under-allocation bug in sh_eth, from Yoshihiro Shimoda. 7) Revert skge PCI mapping changes that are causing crashes for some folks, from Stephen Hemminger. 8) IPV4 route lookups fill in the wildcarded fields of the given flow lookup key passed in, which is fine most of the time as this is exactly what the caller's want. However there are a few cases that want to retain the original flow key values afterwards, so handle those cases properly. Fix from Julian Anastasov. 9) IGB/IXGBE VF lookup bug fixes from Greg Rose. 10) Properly null terminate filename passed to ethtool flash device method, from Ben Hutchings. 11) S3 resume fix in via-velocity from David Lv. 12) Fix double SKB free during xmit failure in CAIF, from Dmitry Tarnyagin. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (72 commits) net: Don't proxy arp respond if iif == rt->dst.dev if private VLAN is disabled ipv4: Fix wrong order of ip_rt_get_source() and update iph->daddr. netprio_cgroup: fix wrong memory access when NETPRIO_CGROUP=m netprio_cgroup: don't allocate prio table when a device is registered netprio_cgroup: fix an off-by-one bug bna: fix error handling of bnad_get_flash_partition_by_offset() isdn: type bug in isdn_net_header() net: Make qdisc_skb_cb upper size bound explicit. ixgbe: ethtool: stats user buffer overrun ixgbe: dcb: up2tc mapping lost on disable/enable CEE DCB state ixgbe: do not update real num queues when netdev is going away ixgbe: Fix broken dependency on MAX_SKB_FRAGS being related to page size ixgbe: Fix case of Tx Hang in PF with 32 VFs ixgbe: fix vf lookup igb: fix vf lookup e1000: add dropped DMA receive enable back in for WoL gro: more generic L2 header check IPoIB: Stop lying about hard_header_len and use skb->cb to stash LL addresses zd1211rw: firmware needs duration_id set to zero for non-pspoll frames net: enable TC35815 for MIPS again ...
2012-02-10Merge branch 'for-arm-soc' of git://sources.calxeda.com/kernel/linux into ↵Olof Johansson
next/soc * 'for-arm-soc' of git://sources.calxeda.com/kernel/linux: (247 commits) ARM: highbank: remove unused memory.h ARM: highbank: enable sp804 based sched_clock ARM: timer-sp: add sched_clock support Linux 3.3-rc3 pcmcia: fix socket refcount decrementing on each resume mm: fix UP THP spin_is_locked BUGs drivers/leds/leds-lm3530.c: fix setting pltfm->als_vmax mm: compaction: check for overlapping nodes during isolation for migration nilfs2: avoid overflowing segment numbers in nilfs_ioctl_clean_segments() ASoC: wm8994: Disable line output discharge prior to ramping VMID ASoC: wm8994: Fix typo in VMID ramp setting ALSA: oxygen, virtuoso: fix exchanged L/R volumes of aux and CD inputs ALSA: usb-audio: add Edirol UM-3G support checkpatch: Warn on code with 6+ tab indentation ACPI: remove duplicated lines of merging problems with acpi_processor_add ALSA: hda - add support for Uniwill ECS M31EI notebook HID: wiimote: fix invalid power_supply_powers call ALSA: hda - Fix error handling in patch_ca0132.c target: Fix unsupported WRITE_SAME sense payload iscsi: use IP_FREEBIND socket option ...
2012-02-10netprio_cgroup: fix wrong memory access when NETPRIO_CGROUP=mNeil Horman
When the netprio_cgroup module is not loaded, net_prio_subsys_id is -1, and so sock_update_prioidx() accesses cgroup_subsys array with negative index subsys[-1]. Make the code resembles cls_cgroup code, which is bug free. Origionally-authored-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-10Merge tag 'writeback-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux fix 1 mysterious divide error fix 3 NULL dereference bugs in writeback tracing, on SD card removal w/o umount * tag 'writeback-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux: writeback: fix dereferencing NULL bdi->dev on trace_writeback_queue lib: proportion: lower PROP_MAX_SHIFT to 32 on 64-bit kernel writeback: fix NULL bdi->dev in trace writeback_single_inode backing-dev: fix wakeup timer races with bdi_unregister()
2012-02-09Merge tag 'usb-3.3-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb USB fixes for 3.3-rc3 Here are a few minor USB fixes and a bunch of device id updates for the USB drivers. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> * tag 'usb-3.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: usbserial: add new PID number (0xa951) to the ftdi driver usb: ch9.h: usb_endpoint_maxp() uses __le16_to_cpu() usb: musb: fix a build error on mips uwb & wusb & usb wireless controllers: fix kconfig error & build errors usb: Skip PCI USB quirk handling for Netlogic XLP powerpc/usb: fix issue of CPU halt when missing USB PHY clock usb: otg: mv_otg: Add dependence usb: host: Distinguish Kconfig text for Freescale controllers USB: add new zte 3g-dongle's pid to option.c usb: ch9.h: usb_endpoint_maxp() uses __le16_to_cpu() USB: qcserial: don't enable autosuspend USB: qcserial: add several new serial devices usb: otg: mv_otg: Add dependence usb: gadget: zero: fix bug in loopback autoresume handling
2012-02-09net: Make qdisc_skb_cb upper size bound explicit.David S. Miller
Just like skb->cb[], so that qdisc_skb_cb can be encapsulated inside of other data structures. This is intended to be used by IPoIB so that it can remember addressing information stored at hard_header_ops->create() time that it can fetch when the packet gets to the transmit routine. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-08Merge branch '3.3-rc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending This series contains pending target bug-fixes and cleanups for v3.3-rc3 that have been addressed the past weeks in lio-core.git. Some of the highlights include: - Fix handling for control CDBs with data greater than PAGE_SIZE (andy) - Use IP_FREEBIND for iscsi-target to address network portal creation issues with systemd (dax) - Allow PERSISTENT RESERVE IN for non-reservation holder (marco) - Fix iblock se_dev_attrib.unmap_granularity (marco) - Fix unsupported WRITE_SAME sense payload handling (martin) - Add workaround for zero-length control CDB handling (nab) - Fix discovery with INADDR_ANY and IN6ADDR_ANY_INIT (nab) - Fix target_submit_cmd() exception handling (nab) - Return correct ASC for unimplemented VPD pages (roland) - Don't zero pages used for data buffers (roland) - Fix return code of core_tpg_.*_lun (sebastian) * '3.3-rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (26 commits) target: Fix unsupported WRITE_SAME sense payload iscsi: use IP_FREEBIND socket option iblock: fix handling of large requests target: handle empty string writes in sysfs iscsi_target: in_aton needs linux/inet.h target: Fix iblock se_dev_attrib.unmap_granularity target: Fix target_submit_cmd() exception handling target: Change target_submit_cmd() to return void target: accept REQUEST_SENSE with 18bytes target: Fail INQUIRY commands with EVPD==0 but PAGE CODE!=0 target: Return correct ASC for unimplemented VPD pages iscsi-target: Fix discovery with INADDR_ANY and IN6ADDR_ANY_INIT target: Allow control CDBs with data > 1 page iscsi-target: Fix up a few assignments iscsi-target: make one-bit bitfields unsigned iscsi-target: Fix double list_add with iscsit_alloc_buffs reject iscsi-target: Fix reject release handling in iscsit_free_cmd() target: fix return code of core_tpg_.*_lun target: use save/restore lock primitive in core_dec_lacl_count() target: avoid multiple outputs in scsi_dump_inquiry() ...
2012-02-08cdrom: move shared static to cdrom_device_infoPaolo Bonzini
The keeplocked variable in the cdrom driver is shared across multiple drives, but set in per-device ioctls. Move it to the per-device struct, avoiding that the setting on one drive affects the driver's behavior when closing another. [ Impact: limit udev's confusion to one drive when a CD burning program unlocks the CD door at the end of burning. ] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-02-08block: don't call elevator callbacks for plug mergesTejun Heo
Plug merge calls two elevator callbacks outside queue lock - elevator_allow_merge_fn() and elevator_bio_merged_fn(). Although attempt_plug_merge() suggests that elevator is guaranteed to be there through the existing request on the plug list, nothing prevents plug merge from calling into dying or initializing elevator. For regular merges, bypass ensures elvpriv count to reach zero, which in turn prevents merges as all !ELVPRIV requests get REQ_SOFTBARRIER from forced back insertion. Plug merge doesn't check ELVPRIV, and, as the requests haven't gone through elevator insertion yet, it doesn't have SOFTBARRIER set allowing merges on a bypassed queue. This, for example, leads to the following crash during elevator switch. BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: [<ffffffff813b34e9>] cfq_allow_merge+0x49/0xa0 PGD 112cbc067 PUD 115d5c067 PMD 0 Oops: 0000 [#1] PREEMPT SMP CPU 1 Modules linked in: deadline_iosched Pid: 819, comm: dd Not tainted 3.3.0-rc2-work+ #76 Bochs Bochs RIP: 0010:[<ffffffff813b34e9>] [<ffffffff813b34e9>] cfq_allow_merge+0x49/0xa0 RSP: 0018:ffff8801143a38f8 EFLAGS: 00010297 RAX: 0000000000000000 RBX: ffff88011817ce28 RCX: ffff880116eb6cc0 RDX: 0000000000000000 RSI: ffff880118056e20 RDI: ffff8801199512f8 RBP: ffff8801143a3908 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: ffff880118195708 R13: ffff880118052aa0 R14: ffff8801143a3d50 R15: ffff880118195708 FS: 00007f19f82cb700(0000) GS:ffff88011fc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000008 CR3: 0000000112c6a000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process dd (pid: 819, threadinfo ffff8801143a2000, task ffff880116eb6cc0) Stack: ffff88011817ce28 ffff880118195708 ffff8801143a3928 ffffffff81391bba ffff88011817ce28 ffff880118195708 ffff8801143a3948 ffffffff81391bf1 ffff88011817ce28 0000000000000000 ffff8801143a39a8 ffffffff81398e3e Call Trace: [<ffffffff81391bba>] elv_rq_merge_ok+0x4a/0x60 [<ffffffff81391bf1>] elv_try_merge+0x21/0x40 [<ffffffff81398e3e>] blk_queue_bio+0x8e/0x390 [<ffffffff81396a5a>] generic_make_request+0xca/0x100 [<ffffffff81396b04>] submit_bio+0x74/0x100 [<ffffffff811d45c2>] __blockdev_direct_IO+0x1ce2/0x3450 [<ffffffff811d0dc7>] blkdev_direct_IO+0x57/0x60 [<ffffffff811460b5>] generic_file_aio_read+0x6d5/0x760 [<ffffffff811986b2>] do_sync_read+0xe2/0x120 [<ffffffff81199345>] vfs_read+0xc5/0x180 [<ffffffff81199501>] sys_read+0x51/0x90 [<ffffffff81aeac12>] system_call_fastpath+0x16/0x1b There are multiple ways to fix this including making plug merge check ELVPRIV; however, * Calling into elevator outside queue lock is confusing and error-prone. * Requests on plug list aren't known to the elevator. They aren't on the elevator yet, so there's no elevator specific state to update. * Given the nature of plug merges - collecting bio's for the same purpose from the same issuer - elevator specific restrictions aren't applicable. So, simply don't call into elevator methods from plug merge by moving elv_bio_merged() from bio_attempt_*_merge() to blk_queue_bio(), and using blk_try_merge() in attempt_plug_merge(). This is based on Jens' patch to skip elevator_allow_merge_fn() from plug merge. Note that this makes per-cgroup merged stats skip plug merging. Signed-off-by: Tejun Heo <tj@kernel.org> LKML-Reference: <4F16F3CA.90904@kernel.dk> Original-patch-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-02-08block: separate out blk_rq_merge_ok() and blk_try_merge() from elevator ↵Tejun Heo
functions blk_rq_merge_ok() is the elevator-neutral part of merge eligibility test. blk_try_merge() determines merge direction and expects the caller to have tested elv_rq_merge_ok() previously. elv_rq_merge_ok() now wraps blk_rq_merge_ok() and then calls elv_iosched_allow_merge(). elv_try_merge() is removed and the two callers are updated to call elv_rq_merge_ok() explicitly followed by blk_try_merge(). While at it, make rq_merge_ok() functions return bool. This is to prepare for plug merge update and doesn't introduce any behavior change. This is based on Jens' patch to skip elevator_allow_merge_fn() from plug merge. Signed-off-by: Tejun Heo <tj@kernel.org> LKML-Reference: <4F16F3CA.90904@kernel.dk> Original-patch-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-02-07Merge tag 'fbdev-fixes-for-3.3-1' of git://github.com/schandinat/linux-2.6Linus Torvalds
fbdev fixes for 3.3 It includes: - compile fix for fsl-diu-fb - fix for a suspend/resume issue in atmel_lcdfb - fix for a suspend/resume issue in OMAP - workaround for a hardware bug to avoid physical damage in OMAP - really trivial dead code removal in intelfb * tag 'fbdev-fixes-for-3.3-1' of git://github.com/schandinat/linux-2.6: atmel_lcdfb: fix usage of CONTRAST_CTR in suspend/resume intelfb: remove some dead code drivers/video: compile fixes for fsl-diu-fb.c OMAPDSS: HDMI: PHY burnout fix OMAP: 4430SDP/Panda: add HDMI HPD gpio OMAP: 4430SDP/Panda: setup HDMI GPIO muxes OMAPDSS: remove wrong HDMI HPD muxing OMAP: 4430SDP/Panda: rename HPD GPIO to CT_CP_HPD OMAP: 4430SDP/Panda: use gpio_free_array to free HDMI gpios OMAPDSS: use sync versions of pm_runtime_put
2012-02-07Merge tag 'v3.3-rc2' into depends/rmk/for-armsocOlof Johansson
There were conflicts between fixes going in after 3.3-rc1 and Russell's stable arm-soc base branch. Resolving it in the dependency branch so that each topic branch shares the same resolution. Conflicts: arch/arm/mach-at91/at91cap9.c arch/arm/mach-at91/at91sam9g45.c
2012-02-07Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
arch: fix ioport mapping on mips,sh Kevin Cernekee reported that recent cleanup that replaced pci_iomap with a generic function failed to take into account the differences in io port handling on mips and sh architectures. Rather than revert the changes reintroducing the code duplication, this patchset fixes this by adding ability for architectures to override ioport mapping for pci devices. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: sh: use the the PCI channels's io_map_base mips: use the the PCI controller's io_map_base lib: add NO_GENERIC_PCI_IOPORT_MAP
2012-02-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: mfd: Avoid twl6040-codec PLL reconfiguration when not needed mfd: Store twl6040-codec mclk configuration
2012-02-07block: strip out locking optimization in put_io_context()Tejun Heo
put_io_context() performed a complex trylock dancing to avoid deferring ioc release to workqueue. It was also broken on UP because trylock was always assumed to succeed which resulted in unbalanced preemption count. While there are ways to fix the UP breakage, even the most pathological microbench (forced ioc allocation and tight fork/exit loop) fails to show any appreciable performance benefit of the optimization. Strip it out. If there turns out to be workloads which are affected by this change, simpler optimization from the discussion thread can be applied later. Signed-off-by: Tejun Heo <tj@kernel.org> LKML-Reference: <1328514611.21268.66.camel@sli10-conroe> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-02-07target: Change target_submit_cmd() to return voidAndy Grover
Retval not very useful, and may even be harmful. Once submitted, fabrics should expect a sense error if anything goes wrong. All fabrics checking of this retval are useless or broken: fc checks it just to emit more debug output. ib_srpt trickles retval up, then it is ignored. qla2xxx trickles it up, which then causes a bug because the abort goto in qla_target.c thinks cmd hasn't been sent to target. Just returning nothing is best. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-06exec: fix use-after-free bug in setup_new_exec()Heiko Carstens
Setting the task name is done within setup_new_exec() by accessing bprm->filename. However this happens after flush_old_exec(). This may result in a use after free bug, flush_old_exec() may "complete" vfork_done, which will wake up the parent which in turn may free the passed in filename. To fix this add a new tcomm field in struct linux_binprm which contains the now early generated task name until it is used. Fixes this bug on s390: Unable to handle kernel pointer dereference at virtual kernel address 0000000039768000 Process kworker/u:3 (pid: 245, task: 000000003a3dc840, ksp: 0000000039453818) Krnl PSW : 0704000180000000 0000000000282e94 (setup_new_exec+0xa0/0x374) Call Trace: ([<0000000000282e2c>] setup_new_exec+0x38/0x374) [<00000000002dd12e>] load_elf_binary+0x402/0x1bf4 [<0000000000280a42>] search_binary_handler+0x38e/0x5bc [<0000000000282b6c>] do_execve_common+0x410/0x514 [<0000000000282cb6>] do_execve+0x46/0x58 [<00000000005bce58>] kernel_execve+0x28/0x70 [<000000000014ba2e>] ____call_usermodehelper+0x102/0x140 [<00000000005bc8da>] kernel_thread_starter+0x6/0xc [<00000000005bc8d4>] kernel_thread_starter+0x0/0xc Last Breaking-Event-Address: [<00000000002830f0>] setup_new_exec+0x2fc/0x374 Kernel panic - not syncing: Fatal exception: panic_on_oops Reported-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-02-06writeback: fix dereferencing NULL bdi->dev on trace_writeback_queueWu Fengguang
When a SD card is hot removed without umount, del_gendisk() will call bdi_unregister() without destroying/freeing it. This leaves the bdi in the bdi->dev = NULL, bdi->wb.task = NULL, bdi->bdi_list removed state. When sync(2) gets the bdi before bdi_unregister() and calls bdi_queue_work() after the unregister, trace_writeback_queue will be dereferencing the NULL bdi->dev. Fix it with a simple test for NULL. LKML-reference: http://lkml.org/lkml/2012/1/18/346 Cc: stable@kernel.org Reported-by: Rabin Vincent <rabin@rab.in> Tested-by: Namjae Jeon <linkinjeon@gmail.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
2012-02-04ipv4: reset flowi parameters on route connectJulian Anastasov
Eric Dumazet found that commit 813b3b5db83 (ipv4: Use caller's on-stack flowi as-is in output route lookups.) that comes in 3.0 added a regression. The problem appears to be that resulting flowi4_oif is used incorrectly as input parameter to some routing lookups. The result is that when connecting to local port without listener if the IP address that is used is not on a loopback interface we incorrectly assign RTN_UNICAST to the output route because no route is matched by oif=lo. The RST packet can not be sent immediately by tcp_v4_send_reset because it expects RTN_LOCAL. So, change ip_route_connect and ip_route_newports to update the flowi4 fields that are input parameters because we do not want unnecessary binding to oif. To make it clear what are the input parameters that can be modified during lookup and to show which fields of floiw4 are reused add a new function to update the flowi4 structure: flowi4_update_output. Thanks to Yurij M. Plotnikov for providing a bug report including a program to reproduce the problem. Thanks to Eric Dumazet for tracking the problem down to tcp_v4_send_reset and providing initial fix. Reported-by: Yurij M. Plotnikov <Yurij.Plotnikov@oktetlabs.ru> Signed-off-by: Julian Anastasov <ja@ssi.bg> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-04Merge tag 'pm-fixes-for-3.3-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Power management fixes for 3.3-rc3 Three power management regression fixes, one for a recent regression introcuded by the freezer changes during the 3.3 merge window and two for regressions in cpuidle (resulting from PM QoS changes) and in the hibernate user space interface, both introduced during the 3.2 development cycle. They include: * Two hibernate (s2disk) regression fixes from Srivatsa S. Bhat (for regressions introduced during the 3.3 merge window and during the 3.2 development cycle). * A cpuidle fix from Venki Pallipadi for a regression resulting from PM QoS changes during the 3.2 development cycle causing cpuidle to work incorrectly for CONFIG_PM unset. * tag 'pm-fixes-for-3.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / QoS: CPU C-state breakage with PM Qos change PM / Freezer: Thaw only kernel threads if freezing of kernel threads fails PM / Hibernate: Thaw kernel threads in SNAPSHOT_CREATE_IMAGE ioctl path
2012-02-04PM / QoS: CPU C-state breakage with PM Qos changeVenkatesh Pallipadi
Looks like change "PM QoS: Move and rename the implementation files" merged during the 3.2 development cycle made PM QoS depend on CONFIG_PM which depends on (PM_SLEEP || PM_RUNTIME). That breaks CPU C-states with kernels not having these CONFIGs, causing CPUs to spend time in Polling loop idle instead of going into deep C-states, consuming way way more power. This is with either acpi idle or intel idle enabled. Either CONFIG_PM should be enabled with any pm_qos users or the !CONFIG_PM pm_qos_request() should return sane defaults not to break the existing users. Here's is the patch for the latter option. [rjw: Modified the changelog slightly.] Signed-off-by: Venkatesh Pallipadi <venki@google.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: stable@vger.kernel.org
2012-02-04Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: i8042 - add Lenovo Ideapad U455 to 'reset' blacklist Input: serio_raw - return proper result when serio_raw_read fails Input: document device properties Input: twl4030_keypad - fix comment (trivial) Input: gpio_keys - fix struct device declared inside parameter list Input: evdev - fix variable initialisation
2012-02-04Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: i.MX SDMA: Fix burstsize settings ARM: mach-shmobile: both USB DMAC instances on sh7372 are slave-only dma: sh_dma: not all SH DMAC implementations support MEMCPY at_hdmac: bugfix for enabling channel irq dmaengine: fix missing 'cnt' in ?: in dmatest
2012-02-04Merge tag 'for-linus-3.3' of git://git.infradead.org/~dwmw2/mtd-3.3Linus Torvalds
- Fix a regression in 16-bit Atmel NAND flash which was introduced in 3.1 - Fix breakage with MTD suspend caused by the API rework - Fix a problem with resetting the MX28 BCH module - A couple of other trivial fixes * tag 'for-linus-3.3-20120204' of git://git.infradead.org/~dwmw2/mtd-3.3: Revert "mtd: atmel_nand: optimize read/write buffer functions" mtd: fix MTD suspend jffs2: do not initialize variable unnecessarily mtd: gpmi-nand bugfix: reset the BCH module when it is not MX23 mtd: nand: fix typo in comment
2012-02-03NFSv4: Fix an Oops in the NFSv4 getacl codeTrond Myklebust
Commit bf118a342f10dafe44b14451a1392c3254629a1f (NFSv4: include bitmap in nfsv4 get acl data) introduces the 'acl_scratch' page for the case where we may need to decode multi-page data. However it fails to take into account the fact that the variable may be NULL (for the case where we're not doing multi-page decode), and it also attaches it to the encoding xdr_stream rather than the decoding one. The immediate result is an Oops in nfs4_xdr_enc_getacl due to the call to page_address() with a NULL page pointer. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Andy Adamson <andros@netapp.com> Cc: stable@vger.kernel.org
2012-02-03Merge tag 'sound-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound sound fixes for 3.3-rc3 Most of commits are either regression fixes for varioud HD-audio codecs or small ASoC fixes. Also a trivial build fix is included. * tag 'sound-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Disable dynamic-power control for VIA as default ALSA: hda - Allow analog low-current mode when dynamic power-control is on ALSA: hda - Fix the logic to detect VIA analog low-current mode ALSA: hda - Check power-state before changing in patch_via.c ALSA: HDA: Fix duplicated output to more than one codec ALSA: hda - Fix calling cs_automic twice for Cirrus codecs. ALSA: HDA: Remove quirk for Toshiba Qosmio G50 ALSA: HDA: Fix jack creation for codecs with front and rear Line In ALSA: hda - Apply 0x0f-VREF fix to all ASUS laptops with ALC861/660 ASoC: neo1973_wm8753: remove references to the neo1973-gta01 machine ALSA: Add #ifdef CONFIG_PCI guard for snd_pci_quirk_* functions ASoC: wm_hubs: fix wrong bits for LINEOUT2 N/P mixer ALSA: HDA: Remove quirk for Asus N53Jq ASoC: wm_hubs: Enable line out VMID buffer for single ended line outputs ASoC: wm5100: Mark register cache as dirty when regulators are disabled ASoC: wm8962: Mark register cache as dirty when regulators are disabled ASoC: wm8996: Mark register cache as dirty when regulators are disabled ASoC: wm5100: Fix microphone configuration ASoC: wm5100: Make sure we switch to button reporting mode
2012-02-03mfd: Store twl6040-codec mclk configurationPeter Ujfalusi
Store the last used mclk configuration for the PLL. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-02-02include/linux/lp8727.h: Remove executable bitJosh Triplett
Signed-off-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-02-02Fix race in process_vm_rw_coreChristopher Yeoh
This fixes the race in process_vm_core found by Oleg (see http://article.gmane.org/gmane.linux.kernel/1235667/ for details). This has been updated since I last sent it as the creation of the new mm_access() function did almost exactly the same thing as parts of the previous version of this patch did. In order to use mm_access() even when /proc isn't enabled, we move it to kernel/fork.c where other related process mm access functions already are. Signed-off-by: Chris Yeoh <yeohc@au1.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-29 23:51:30 +0000