summaryrefslogtreecommitdiffstats
path: root/kernel/irq/chip.c
AgeCommit message (Collapse)Author
2011-03-02genirq: Fixup fasteoi handler for oneshot modeThomas Gleixner
The fasteoi handler must mask the interrupt line in oneshot mode otherwise we end up with an irq storm. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-21genirq: Fix misplaced status update in irq_disable()Thomas Gleixner
We lazy disable interrupt lines, so only mark the line masked, when the chip provides an irq_disable callback. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq; Add fasteoi irq_chip quirkThomas Gleixner
Some chips want irq_eoi() only called when an interrupt is actually handled. So they have checks for INPROGRESS and DISABLED in their irq_eoi callbacks. Add a chip flag, which allows to handle that in the generic code. No impact on the fastpath. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Add preflow handler supportThomas Gleixner
sparc64 needs to call a preflow handler on certain interrupts befor calling the action chain. Integrate it into handle_fasteoi_irq. Must be enabled via CONFIG_IRQ_FASTEOI_PREFLOW. No impact when disabled. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: David S. Miller <davem@davemloft.net>
2011-02-19genirq: Consolidate set_chip_handler functionsThomas Gleixner
No need to have separate functions if we have one plus inline wrappers. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Use irq_get/put functionsThomas Gleixner
Convert the management functions to use the common irq_get/put function. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Remove real old transition functionsThomas Gleixner
These transition helpers are stale for years now. Remove them. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Reflect IRQ_MOVE_PCNTXT in irq_data stateThomas Gleixner
Required by x86. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Add IRQCHIP_SET_TYPE_MASKED flagThomas Gleixner
irq_chips, which require to mask the chip before changing the trigger type should set this flag. So the core takes care of it and the requirement for looking into desc->status in the chip goes away. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Lars-Peter Clausen <lars@metafoo.de>
2011-02-19genirq: Wrap the remaning IRQ_* flagsThomas Gleixner
Use wrappers to keep them away from the core code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Mirror irq trigger type bits in irq_data.stateThomas Gleixner
That's the data structure chip functions get provided. Also allow them to signal the core code that they updated the flags in irq_data.state by returning IRQ_SET_MASK_OK_NOCOPY. The default is unchanged. The type bits should be accessed via: val = irqd_get_trigger_type(irqdata); and irqd_set_trigger_type(irqdata, val); Coders who access them directly will be tracked down and slapped with stinking trouts. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Mirror IRQ_PER_CPU and IRQ_NO_BALANCING in irq_data.stateThomas Gleixner
That's the right data structure to look at for arch code. Accessor functions are provided. irqd_is_per_cpu(irqdata); irqd_can_balance(irqdata); Coders who access them directly will be tracked down and slapped with stinking trouts. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move IRQ_MASKED to coreThomas Gleixner
Keep status in sync until all users are fixed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move IRQ_PENDING flag to coreThomas Gleixner
Keep status in sync until all users are fixed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move IRQ_DISABLED to coreThomas Gleixner
Keep status in sync until all abusers are fixed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move IRQ_REPLAY and IRQ_WAITING to coreThomas Gleixner
No users outside of core. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move IRQ_ONESHOT to coreThomas Gleixner
No users outside of core. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Add IRQ_INPROGRESS to coreThomas Gleixner
We need to maintain the flag for now in both fields status and istate. Add a CONFIG_GENERIC_HARDIRQS_NO_COMPAT switch to allow testing w/o the status one. Wrap the access to status IRQ_INPROGRESS in a inline which can be turned of with CONFIG_GENERIC_HARDIRQS_NO_COMPAT along with the define. There is no reason that anything outside of core looks at this. That needs some modifications, but we'll get there. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move IRQ_POLL_INPROGRESS to coreThomas Gleixner
No users outside of core. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Use modify_status for set_irq_nested_threadThomas Gleixner
No need for a separate function in the core code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Fixup core code namespace falloutThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Use handle_perpcu_event() in handle_percpu_irq()Thomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Use handle_irq_event() in handle_edge_irq()Thomas Gleixner
It's safe to drop the IRQ_INPROGRESS flag between action chain walks as we are protected by desc->lock. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Use handle_irq_event() in handle_fasteoi_irq()Thomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Use handle_irq_event() in handle_level_irq()Thomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Use handle_irq_event() in handle_simple_irq()Thomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Do not fiddle with IRQ_MASKED in handle_edge_irq()Thomas Gleixner
IRQ_MASKED is set in mask_ack_irq() anyway. Remove it from handle_edge_irq() to allow simpler ab^HHreuse of that function. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20110202212551.918484270@linutronix.de>
2011-02-19genirq: Consolidate IRQ_DISABLEDThomas Gleixner
Handle IRQ_DISABLED consistent. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Remove default magicThomas Gleixner
Now that everything uses the wrappers, we can remove the default functions. None of those functions is performance critical. That makes the IRQ_MASKED flag tracking fully consistent. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Consolidate disable/enableThomas Gleixner
Create irq_disable/enable and use them to keep the flags consistent. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Consolidate startup/shutdown of interruptsThomas Gleixner
Aside of duplicated code some of the startup/shutdown sites do not handle the MASKED/DISABLED flags and the depth field at all. Move that to a helper function and take care of it there. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20110202212551.787481468@linutronix.de>
2011-02-19genirq: Mark polled irqs and defer the real handlerThomas Gleixner
With the chip.end() function gone we might run into a situation where a poll call runs and the real interrupt comes in, sees IRQ_INPROGRESS and disables the line. That might be a perfect working one, which will then be masked forever. So mark them polled while the poll runs. When the real handler sees IRQ_INPROGRESS it checks the poll flag and waits for the polling to complete. Add the necessary amount of sanity checks to it to avoid deadlocks. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Namespace cleanupThomas Gleixner
The irq namespace has become quite convoluted. My bad. Clean it up and deprecate the old functions. All new functions follow the scheme: irq number based: irq_set/get/xxx/_xxx(unsigned int irq, ...) irq_data based: irq_data_set/get/xxx/_xxx(struct irq_data *d, ....) irq_desc based: irq_desc_get_xxx(struct irq_desc *desc) Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Add missing buslock to set_irq_type(), set_irq_wake()Thomas Gleixner
chips behind a slow bus cannot update the chip under desc->lock, but we miss the chip_buslock/chip_bus_sync_unlock() calls around the set type and set wake functions. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-10-12genirq: Sanitize dynamic irq handlingThomas Gleixner
Use the cleanup functions of the dynamic allocator. No need to have separate implementations. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-12genirq: Provide default irq init flagsThomas Gleixner
Arch code sets it's own irq_desc.status flags right after boot and for dynamically allocated interrupts. That might involve iterating over a huge array. Allow ARCH_IRQ_INIT_FLAGS to set separate flags aside of IRQ_DISABLED which is the default. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-12genirq: Sanitize irq_data accessorsThomas Gleixner
Get the data structure from the core and provide inline wrappers to access the irq_data members. Provide accessor inlines for irq_data as well. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-12genirq: Provide status modifierThomas Gleixner
Provide a irq_desc.status modifier function to cleanup the direct access to irq_desc in arch and driver code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-04genirq: Provide config option to disable deprecated codeThomas Gleixner
This option covers now the old chip functions and the irq_desc data fields which are moving to struct irq_data. More stuff will follow. Pretty handy for testing a conversion, whether something broke or not. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-04genirq: Provide compat handling for chip->retrigger()Thomas Gleixner
Wrap the old chip function retrigger() until the migration is complete and the old chip functions are removed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20100927121843.025801092@linutronix.de> Reviewed-by: H. Peter Anvin <hpa@zytor.com> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-04genirq: Provide compat handling for chip->set_wake()Thomas Gleixner
Wrap the old chip function set_wake() until the migration is complete and the old chip functions are removed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20100927121842.927527393@linutronix.de> Reviewed-by: H. Peter Anvin <hpa@zytor.com> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-04genirq: Provide compat handling for chip->set_type()Thomas Gleixner
Wrap the old chip function set_type() until the migration is complete and the old chip functions are removed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20100927121842.832261548@linutronix.de> Reviewed-by: H. Peter Anvin <hpa@zytor.com> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-04genirq: Provide compat handling for chip->set_affinity()Thomas Gleixner
Wrap the old chip function set_affinity() until the migration is complete and the old chip functions are removed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20100927121842.732894108@linutronix.de> Reviewed-by: H. Peter Anvin <hpa@zytor.com> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-04genirq: Provide compat handling for chip->startup()Thomas Gleixner
Wrap the old chip function startup() until the migration is complete and the old chip functions are removed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20100927121842.635152961@linutronix.de> Reviewed-by: H. Peter Anvin <hpa@zytor.com> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-04genirq: Provide compat handling for chip->disable()/shutdown()Thomas Gleixner
Wrap the old chip functions disable() and shutdown() until the migration is complete and the old chip functions are removed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20100927121842.532070631@linutronix.de> Reviewed-by: H. Peter Anvin <hpa@zytor.com> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-04genirq: Provide compat handling for chip->enable()Thomas Gleixner
Wrap the old chip function enable() until the migration is complete and the old chip functions are removed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20100927121842.437159182@linutronix.de> Reviewed-by: H. Peter Anvin <hpa@zytor.com> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-04genirq: Provide compat handling for chip->eoi()Thomas Gleixner
Wrap the old chip function eoi() until the migration is complete and the old chip functions are removed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20100927121842.339657617@linutronix.de> Reviewed-by: H. Peter Anvin <hpa@zytor.com> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-04genirq: Provide compat handling for chip->mask_ack()Thomas Gleixner
Wrap the old chip function mask_ack() until the migration is complete and the old chip functions are removed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20100927121842.240806983@linutronix.de> Reviewed-by: H. Peter Anvin <hpa@zytor.com> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-04genirq: Provide compat handling for chip->ack()Thomas Gleixner
Wrap the old chip function ack() until the migration is complete and the old chip functions are removed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20100927121842.142624725@linutronix.de> Reviewed-by: H. Peter Anvin <hpa@zytor.com> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-04genirq: Provide compat handling for chip->unmask()Thomas Gleixner
Wrap the old chip function unmask() until the migration is complete and the old chip functions are removed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20100927121842.043608928@linutronix.de> Reviewed-by: H. Peter Anvin <hpa@zytor.com> Reviewed-by: Ingo Molnar <mingo@elte.hu>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-10 21:18:18 +0000