summaryrefslogtreecommitdiffstats
path: root/kernel/irq/manage.c
AgeCommit message (Collapse)Author
2011-02-19genirq: Wrap the remaning IRQ_* flagsThomas Gleixner
Use wrappers to keep them away from the core code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Mirror irq trigger type bits in irq_data.stateThomas Gleixner
That's the data structure chip functions get provided. Also allow them to signal the core code that they updated the flags in irq_data.state by returning IRQ_SET_MASK_OK_NOCOPY. The default is unchanged. The type bits should be accessed via: val = irqd_get_trigger_type(irqdata); and irqd_set_trigger_type(irqdata, val); Coders who access them directly will be tracked down and slapped with stinking trouts. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move IRQ_AFFINITY_SET to coreThomas Gleixner
Keep status in sync until last abuser is gone. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Reuse existing can set affinty checkThomas Gleixner
Add a !desc check while at it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Mirror IRQ_PER_CPU and IRQ_NO_BALANCING in irq_data.stateThomas Gleixner
That's the right data structure to look at for arch code. Accessor functions are provided. irqd_is_per_cpu(irqdata); irqd_can_balance(irqdata); Coders who access them directly will be tracked down and slapped with stinking trouts. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Remove CHECK_IRQ_PER_CPU from core codeThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Remove CONFIG_IRQ_PER_CPUThomas Gleixner
The saving of this switch is minimal versus the ifdef mess it creates. Simple enable PER_CPU unconditionally and remove the config switch. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Add IRQ_MOVE_PENDING to irq_data.stateThomas Gleixner
chip implementations need to know about it. Keep status in sync until all users are fixed. Accessor function: irqd_is_setaffinity_pending(irqdata) Coders who access them directly will be tracked down and slapped with stinking trouts. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move IRQ_WAKEUP to coreThomas Gleixner
No users outside of core. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move IRQ_SUSPENDED to coreThomas Gleixner
No users outside of core. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move IRQ_MASKED to coreThomas Gleixner
Keep status in sync until all users are fixed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move IRQ_PENDING flag to coreThomas Gleixner
Keep status in sync until all users are fixed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move IRQ_DISABLED to coreThomas Gleixner
Keep status in sync until all abusers are fixed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move IRQ_REPLAY and IRQ_WAITING to coreThomas Gleixner
No users outside of core. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move IRQ_ONESHOT to coreThomas Gleixner
No users outside of core. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Add IRQ_INPROGRESS to coreThomas Gleixner
We need to maintain the flag for now in both fields status and istate. Add a CONFIG_GENERIC_HARDIRQS_NO_COMPAT switch to allow testing w/o the status one. Wrap the access to status IRQ_INPROGRESS in a inline which can be turned of with CONFIG_GENERIC_HARDIRQS_NO_COMPAT along with the define. There is no reason that anything outside of core looks at this. That needs some modifications, but we'll get there. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move IRQ_SPURIOUS_DISABLED to core stateThomas Gleixner
No users outside. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move IRQ_AUTODETECT to internal stateThomas Gleixner
No users outside of core Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Fixup core code namespace falloutThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Consolidate IRQ_DISABLEDThomas Gleixner
Handle IRQ_DISABLED consistent. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Remove default magicThomas Gleixner
Now that everything uses the wrappers, we can remove the default functions. None of those functions is performance critical. That makes the IRQ_MASKED flag tracking fully consistent. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Consolidate disable/enableThomas Gleixner
Create irq_disable/enable and use them to keep the flags consistent. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Consolidate startup/shutdown of interruptsThomas Gleixner
Aside of duplicated code some of the startup/shutdown sites do not handle the MASKED/DISABLED flags and the depth field at all. Move that to a helper function and take care of it there. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20110202212551.787481468@linutronix.de>
2011-02-19genirq: Remove bogus conditionalThomas Gleixner
The if (chip->irq_shutdown) check will always evaluate to true, as we fill in chip->irq_shutdown with default_shutdown in irq_chip_set_defaults() if the chip does not provide its own function. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20110202212551.667607458@linutronix.de>
2011-02-19genirq: Remove redundant thread affinity settingThomas Gleixner
Thread affinity is already set by setup_affinity(). Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Do not copy affinity before setThomas Gleixner
While rumaging through arch code I found that there are a few workarounds which deal with the fact that the initial affinity setting from request_irq() copies the mask into irq_data->affinity before the chip code is called. In the normal path we unconditionally copy the mask when the chip code returns 0. Copy after the code is called and add a return code IRQ_SET_MASK_OK_NOCOPY for the chip functions, which prevents the copy. That way we see the real mask when the chip function decided to truncate it further as some arches do. IRQ_SET_MASK_OK is 0, which is the current behaviour. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Always apply cpu online maskThomas Gleixner
If the affinity had been set by the user, then a later request_irq() will honour that setting. But online cpus can have changed. So apply the online mask and for this case as well. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Rremove redundant checkThomas Gleixner
IRQ_NO_BALANCING is already checked in irq_can_set_affinity() above, no need to check it again. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Simplify affinity related codeThomas Gleixner
There is lot of #ifdef CONFIG_GENERIC_PENDING_IRQ along with duplicated code in the irq core. Move the #ifdeffery into one place and cleanup the code so it's readable. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Namespace cleanupThomas Gleixner
The irq namespace has become quite convoluted. My bad. Clean it up and deprecate the old functions. All new functions follow the scheme: irq number based: irq_set/get/xxx/_xxx(unsigned int irq, ...) irq_data based: irq_data_set/get/xxx/_xxx(struct irq_data *d, ....) irq_desc based: irq_desc_get_xxx(struct irq_desc *desc) Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Add missing buslock to set_irq_type(), set_irq_wake()Thomas Gleixner
chips behind a slow bus cannot update the chip under desc->lock, but we miss the chip_buslock/chip_bus_sync_unlock() calls around the set type and set wake functions. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19Merge branch 'irq/urgent' into irq/coreThomas Gleixner
Reason: Further patches are conflicting with mainline fixes Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Disable the SHIRQ_DEBUG call in request_threaded_irq for nowThomas Gleixner
With CONFIG_SHIRQ_DEBUG=y we call a newly installed interrupt handler in request_threaded_irq(). The original implementation (commit a304e1b8) called the handler _BEFORE_ it was installed, but that caused problems with handlers calling disable_irq_nosync(). See commit 377bf1e4. It's braindead in the first place to call disable_irq_nosync in shared handlers, but .... Moving this call after we installed the handler looks innocent, but it is very subtle broken on SMP. Interrupt handlers rely on the fact, that the irq core prevents reentrancy. Now this debug call violates that promise because we run the handler w/o the IRQ_INPROGRESS protection - which we cannot apply here because that would result in a possibly forever masked interrupt line. A concurrent real hardware interrupt on a different CPU results in handler reentrancy and can lead to complete wreckage, which was unfortunately observed in reality and took a fricking long time to debug. Leave the code here for now. We want this debug feature, but that's not easy to fix. We really should get rid of those disable_irq_nosync() abusers and remove that function completely. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Arjan van de Ven <arjan@infradead.org> Cc: stable@kernel.org # .28 -> .37
2011-02-11Merge branch 'irq/for-mips' into irq/coreThomas Gleixner
Reason: irq/for-mips is provided for mips to make core independent progress. Merge it into irq/core to avoid conflicts Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-11genirq: Call bus_lock/unlock functions in setup_irq()David Daney
irq_chips that supply .irq_bus_lock/.irq_bus_sync_unlock functions, expect that the other chip methods will be called inside of calls to the pair. If this expectation is not met, things tend to not work. Make setup_irq() call chip_bus_lock()/chip_bus_sync_unlock() too. For the vast majority of irq_chips, this will be a NOP as most don't have these bus lock functions. [ tglx: No we don't want to call that in __setup_irq(). Way too many error exit pathes. ] Signed-off-by: David Daney <ddaney@caviumnetworks.com> LKML-Reference: <1297296265-18680-1-git-send-email-ddaney@caviumnetworks.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-08Merge branch 'irq/for-xen' into irq/coreThomas Gleixner
irq/for-xen contains new functionality to avoid Xen private irq hackery. That branch has a single irq commit and is pulled by Xen to base their new features on. Merge it into irq/core as other patches modify the same code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-08genirq: Add IRQF_FORCE_RESUMEThomas Gleixner
Xen needs to reenable interrupts which are marked IRQF_NO_SUSPEND in the resume path. Add a flag to force the reenabling in the resume code. Tested-and-acked-by: Ian Campbell <Ian.Campbell@eu.citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-01-31genirq: Fix affinity notifier falloutThomas Gleixner
The new code of commit cd7eab44e(genirq: Add IRQ affinity notifiers) references irq_desc.affinity which fails to compile with CONFIG_GENERIC_HARDIRQS_NO_DEPRECATED=y. Use irq_desc.irq_data.affinity instead. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ben Hutchings <bhutchings@solarflare.com>
2011-01-22genirq: Add IRQ affinity notifiersBen Hutchings
When initiating I/O on a multiqueue and multi-IRQ device, we may want to select a queue for which the response will be handled on the same or a nearby CPU. This requires a reverse-map of IRQ affinity. Add a notification mechanism to support this. This is based closely on work by Thomas Gleixner <tglx@linutronix.de>. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Cc: linux-net-drivers@solarflare.com Cc: Tom Herbert <therbert@google.com> Cc: David Miller <davem@davemloft.net> LKML-Reference: <1295470904.11126.84.camel@bwh-desktop> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-01-07sched: Constify function scope static struct sched_param usagePeter Zijlstra
Function-scope statics are discouraged because they are easily overlooked and can cause subtle bugs/races due to their global (non-SMP safe) nature. Linus noticed that we did this for sched_param - at minimum make the const. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: Message-ID: <AANLkTinotRxScOHEb0HgFgSpGPkq_6jKTv5CfvnQM=ee@mail.gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-18Merge commit 'v2.6.37-rc2' into sched/coreIngo Molnar
Merge reason: Move to a .37-rc base. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-10-23sched: Make sched_param argument static in sched_setscheduler() callersKOSAKI Motohiro
Andrew Morton pointed out almost all sched_setscheduler() callers are using fixed parameters and can be converted to static. It reduces runtime memory use a little. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reported-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: James Morris <jmorris@namei.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-10-22genirq: Warn if enable_irq is called before irq is set upThomas Gleixner
The recent changes in the genirq core unearthed a bug in arch/um which called enable_irq() before the interrupt was set up. Warn and return instead of crashing the machine with a NULL pointer dereference. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Richard Weinberger <richard@nod.at>
2010-10-04genirq: Provide compat handling for chip->set_wake()Thomas Gleixner
Wrap the old chip function set_wake() until the migration is complete and the old chip functions are removed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20100927121842.927527393@linutronix.de> Reviewed-by: H. Peter Anvin <hpa@zytor.com> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-04genirq: Provide compat handling for chip->set_type()Thomas Gleixner
Wrap the old chip function set_type() until the migration is complete and the old chip functions are removed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20100927121842.832261548@linutronix.de> Reviewed-by: H. Peter Anvin <hpa@zytor.com> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-04genirq: Provide compat handling for chip->set_affinity()Thomas Gleixner
Wrap the old chip function set_affinity() until the migration is complete and the old chip functions are removed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20100927121842.732894108@linutronix.de> Reviewed-by: H. Peter Anvin <hpa@zytor.com> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-04genirq: Provide compat handling for chip->startup()Thomas Gleixner
Wrap the old chip function startup() until the migration is complete and the old chip functions are removed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20100927121842.635152961@linutronix.de> Reviewed-by: H. Peter Anvin <hpa@zytor.com> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-04genirq: Provide compat handling for chip->disable()/shutdown()Thomas Gleixner
Wrap the old chip functions disable() and shutdown() until the migration is complete and the old chip functions are removed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20100927121842.532070631@linutronix.de> Reviewed-by: H. Peter Anvin <hpa@zytor.com> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-04genirq: Provide compat handling for chip->unmask()Thomas Gleixner
Wrap the old chip function unmask() until the migration is complete and the old chip functions are removed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20100927121842.043608928@linutronix.de> Reviewed-by: H. Peter Anvin <hpa@zytor.com> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-04genirq: Provide compat handling for bus_lock/bus_sync_unlockThomas Gleixner
Wrap the old chip functions for bus_lock/bus_sync_unlock until the migration is complete and the old chip functions are removed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20100927121841.842536121@linutronix.de> Reviewed-by: H. Peter Anvin <hpa@zytor.com> Reviewed-by: Ingo Molnar <mingo@elte.hu>