summaryrefslogtreecommitdiffstats
path: root/kernel/sched.c
AgeCommit message (Collapse)Author
2009-02-01sched: symmetric sync vs avg_overlapPeter Zijlstra
Reinstate the weakening of the sync hint if set. This yields a more symmetric usage of avg_overlap. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-01sched: fix sync wakeupsPeter Zijlstra
Pawel Dziekonski reported that the openssl benchmark and his quantum chemistry application both show slowdowns due to the scheduler under-parallelizing execution. The reason are pipe wakeups still doing 'sync' wakeups which overrides the normal buddy wakeup logic - even if waker and wakee are loosely coupled. Fix an inversion of logic in the buddy wakeup code. Reported-by: Pawel Dziekonski <dzieko@gmail.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-15Merge branch 'sched-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: sched_slice() fixlet sched: fix update_min_vruntime sched: SCHED_OTHER vs SCHED_IDLE isolation sched: SCHED_IDLE weight change sched: fix bandwidth validation for UID grouping Revert "sched: improve preempt debugging"
2009-01-15sched: SCHED_IDLE weight changePeter Zijlstra
Increase the SCHED_IDLE weight from 2 to 3, this gives much more stable vruntime numbers. time advanced in 100ms: weight=2 64765.988352 67012.881408 88501.412352 weight=3 35496.181411 34130.971298 35497.411573 Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-15sched: fix bandwidth validation for UID groupingPeter Zijlstra
Impact: make rt-limit tunables work again Mark Glines reported: > I've got an issue on x86-64 where I can't configure the system to allow > RT tasks for a non-root user. > > In 2.6.26.5, I was able to do the following to set things up nicely: > echo 450000 >/sys/kernel/uids/0/cpu_rt_runtime > echo 450000 >/sys/kernel/uids/1000/cpu_rt_runtime > > Seems like every value I try to echo into the /sys files returns EINVAL. For UID grouping we initialize the root group with infinite bandwidth which by default is actually more than the global limit, therefore the bandwidth check always fails. Because the root group is a phantom group (for UID grouping) we cannot runtime adjust it, therefore we let it reflect the global bandwidth settings. Reported-by: Mark Glines <mark@glines.org> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-14[CVE-2009-0029] System call wrappers part 08Heiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-14[CVE-2009-0029] System call wrappers part 07Heiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-14[CVE-2009-0029] System call wrappers part 06Heiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-12Revert "sched: improve preempt debugging"Ingo Molnar
This reverts commit 7317d7b87edb41a9135e30be1ec3f7ef817c53dd. This has been reported (and bisected) by Alexey Zaytsev and Kamalesh Babulal to produce annoying warnings during bootup on both x86 and powerpc. kernel_locked() is not a valid test in IRQ context (we update the BKL's ->lock_depth and the preempt count separately and non-atomicalyy), so we cannot put it into the generic preempt debugging checks which can run in IRQ contexts too. Reported-and-bisected-by: Alexey Zaytsev <alexey.zaytsev@gmail.com> Reported-and-bisected-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-11kernel/sched.c: add missing forward declaration for 'double_rq_lock'Steven Noonan
Impact: build fix on certain configs Added 'double_rq_lock' forward declaration, allowing double_rq_lock to be used in _double_lock_balance(). Signed-off-by: Steven Noonan <steven@uplinklabs.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-11cpumask: fix CONFIG_NUMA=y sched.cRusty Russell
Impact: fix panic on ia64 with NR_CPUS=1024 struct sched_domain is now a dangling structure; where we really want static ones, we need to use static_sched_domain. (As the FIXME in this file says, cpumask_var_t would be better, but this code is hairy enough without trying to add initialization code to the right places). Reported-by: Mike Travis <travis@sgi.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-07sched: fix possible recursive rq->lockPeter Zijlstra
Vaidyanathan Srinivasan reported: > ============================================= > [ INFO: possible recursive locking detected ] > 2.6.28-autotest-tip-sv #1 > --------------------------------------------- > klogd/5062 is trying to acquire lock: > (&rq->lock){++..}, at: [<ffffffff8022aca2>] task_rq_lock+0x45/0x7e > > but task is already holding lock: > (&rq->lock){++..}, at: [<ffffffff805f7354>] schedule+0x158/0xa31 With sched_mc at 2. (it is default-off) Strictly speaking we'll not deadlock, because ttwu will not be able to place the migration task on our rq, but since the code can deal with both rqs getting unlocked, this seems the easiest way out. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-06sched: fix section mismatchLi Zefan
init_rootdomain() calls alloc_bootmem_cpumask_var() at system boot, so does cpupri_init(). Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-06sched: fix double kfree in failure pathLi Zefan
It's not the responsibility of init_rootdomain() to free root_domain allocated by alloc_rootdomain(). Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-05sched: clean up arch_reinit_sched_domains()Li Zefan
- Make arch_reinit_sched_domains() static. It was exported to be used in s390, but now rebuild_sched_domains() is used instead. - Make it return void. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-05sched: mark sched_create_sysfs_power_savings_entries() as __initLi Zefan
Impact: cleanup The only caller is cpu_dev_init() which is marked as __init. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-03Merge branch 'cpus4096-for-linus-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'cpus4096-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (77 commits) x86: setup_per_cpu_areas() cleanup cpumask: fix compile error when CONFIG_NR_CPUS is not defined cpumask: use alloc_cpumask_var_node where appropriate cpumask: convert shared_cpu_map in acpi_processor* structs to cpumask_var_t x86: use cpumask_var_t in acpi/boot.c x86: cleanup some remaining usages of NR_CPUS where s/b nr_cpu_ids sched: put back some stack hog changes that were undone in kernel/sched.c x86: enable cpus display of kernel_max and offlined cpus ia64: cpumask fix for is_affinity_mask_valid() cpumask: convert RCU implementations, fix xtensa: define __fls mn10300: define __fls m32r: define __fls h8300: define __fls frv: define __fls cris: define __fls cpumask: CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS cpumask: zero extra bits in alloc_cpumask_var_node cpumask: replace for_each_cpu_mask_nr with for_each_cpu in kernel/time/ cpumask: convert mm/ ...
2009-01-03Merge branch 'cputime' of git://git390.osdl.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'cputime' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: [PATCH] fast vdso implementation for CLOCK_THREAD_CPUTIME_ID [PATCH] improve idle cputime accounting [PATCH] improve precision of idle time detection. [PATCH] improve precision of process accounting. [PATCH] idle cputime accounting [PATCH] fix scaled & unscaled cputime accounting
2009-01-03sched: put back some stack hog changes that were undone in kernel/sched.cMike Travis
Impact: prevents panic from stack overflow on numa-capable machines. Some of the "removal of stack hogs" changes in kernel/sched.c by using node_to_cpumask_ptr were undone by the early cpumask API updates, and causes a panic due to stack overflow. This patch undoes those changes by using cpumask_of_node() which returns a 'const struct cpumask *'. In addition, cpu_coregoup_map is replaced with cpu_coregroup_mask further reducing stack usage. (Both of these updates removed 9 FIXME's!) Also: Pick up some remaining changes from the old 'cpumask_t' functions to the new 'struct cpumask *' functions. Optimize memory traffic by allocating each percpu local_cpu_mask on the same node as the referring cpu. Signed-off-by: Mike Travis <travis@sgi.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-03Merge branch 'master' of ↵Mike Travis
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-cpumask into merge-rr-cpumask Conflicts: arch/x86/kernel/io_apic.c kernel/rcuclassic.c kernel/sched.c kernel/time/tick-sched.c Signed-off-by: Mike Travis <travis@sgi.com> [ mingo@elte.hu: backmerged typo fix for io_apic.c ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-02Merge branch 'cpus4096-for-linus-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'cpus4096-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (66 commits) x86: export vector_used_by_percpu_irq x86: use logical apicid in x2apic_cluster's x2apic_cpu_mask_to_apicid_and() sched: nominate preferred wakeup cpu, fix x86: fix lguest used_vectors breakage, -v2 x86: fix warning in arch/x86/kernel/io_apic.c sched: fix warning in kernel/sched.c sched: move test_sd_parent() to an SMP section of sched.h sched: add SD_BALANCE_NEWIDLE at MC and CPU level for sched_mc>0 sched: activate active load balancing in new idle cpus sched: bias task wakeups to preferred semi-idle packages sched: nominate preferred wakeup cpu sched: favour lower logical cpu number for sched_mc balance sched: framework for sched_mc/smt_power_savings=N sched: convert BALANCE_FOR_xx_POWER to inline functions x86: use possible_cpus=NUM to extend the possible cpus allowed x86: fix cpu_mask_to_apicid_and to include cpu_online_mask x86: update io_apic.c to the new cpumask code x86: Introduce topology_core_cpumask()/topology_thread_cpumask() x86: xen: use smp_call_function_many() x86: use work_on_cpu in x86/kernel/cpu/mcheck/mce_amd_64.c ... Fixed up trivial conflict in kernel/time/tick-sched.c manually
2008-12-31[PATCH] idle cputime accountingMartin Schwidefsky
The cpu time spent by the idle process actually doing something is currently accounted as idle time. This is plain wrong, the architectures that support VIRT_CPU_ACCOUNTING=y can do better: distinguish between the time spent doing nothing and the time spent by idle doing work. The first is accounted with account_idle_time and the second with account_system_time. The architectures that use the account_xxx_time interface directly and not the account_xxx_ticks interface now need to do the check for the idle process in their arch code. In particular to improve the system vs true idle time accounting the arch code needs to measure the true idle time instead of just testing for the idle process. To improve the tick based accounting as well we would need an architecture primitive that can tell us if the pt_regs of the interrupted context points to the magic instruction that halts the cpu. In addition idle time is no more added to the stime of the idle process. This field now contains the system time of the idle process as it should be. On systems without VIRT_CPU_ACCOUNTING this will always be zero as every tick that occurs while idle is running will be accounted as idle time. This patch contains the necessary common code changes to be able to distinguish idle system time and true idle time. The architectures with support for VIRT_CPU_ACCOUNTING need some changes to exploit this. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-31[PATCH] fix scaled & unscaled cputime accountingMartin Schwidefsky
The utimescaled / stimescaled fields in the task structure and the global cpustat should be set on all architectures. On s390 the calls to account_user_time_scaled and account_system_time_scaled never have been added. In addition system time that is accounted as guest time to the user time of a process is accounted to the scaled system time instead of the scaled user time. To fix the bugs and to prevent future forgetfulness this patch merges account_system_time_scaled into account_system_time and account_user_time_scaled into account_user_time. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Chris Wright <chrisw@sous-sol.org> Cc: Michael Neuling <mikey@neuling.org> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-31Merge branch 'master' of ↵Rusty Russell
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: arch/x86/kernel/io_apic.c
2008-12-30Merge branch 'timers-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: hrtimers: fix warning in kernel/hrtimer.c x86: make sure we really have an hpet mapping before using it x86: enable HPET on Fujitsu u9200 linux/timex.h: cleanup for userspace posix-timers: simplify de_thread()->exit_itimers() path posix-timers: check ->it_signal instead of ->it_pid to validate the timer posix-timers: use "struct pid*" instead of "struct task_struct*" nohz: suppress needless timer reprogramming clocksource, acpi_pm.c: put acpi_pm_read_slow() under CONFIG_PCI nohz: no softirq pending warnings for offline cpus hrtimer: removing all ur callback modes, fix hrtimer: removing all ur callback modes, fix hotplug hrtimer: removing all ur callback modes x86: correct link to HPET timer specification rtc-cmos: export second NVRAM bank Fixed up conflicts in sound/drivers/pcsp/pcsp.c and sound/core/hrtimer.c manually.
2008-12-30Merge branch 'core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (63 commits) stacktrace: provide save_stack_trace_tsk() weak alias rcu: provide RCU options on non-preempt architectures too printk: fix discarding message when recursion_bug futex: clean up futex_(un)lock_pi fault handling "Tree RCU": scalable classic RCU implementation futex: rename field in futex_q to clarify single waiter semantics x86/swiotlb: add default swiotlb_arch_range_needs_mapping x86/swiotlb: add default phys<->bus conversion x86: unify pci iommu setup and allow swiotlb to compile for 32 bit x86: add swiotlb allocation functions swiotlb: consolidate swiotlb info message printing swiotlb: support bouncing of HighMem pages swiotlb: factor out copy to/from device swiotlb: add arch hook to force mapping swiotlb: allow architectures to override phys<->bus<->phys conversions swiotlb: add comment where we handle the overflow of a dma mask on 32 bit rcu: fix rcutorture behavior during reboot resources: skip sanity check of busy resources swiotlb: move some definitions to header swiotlb: allow architectures to override swiotlb pool allocation ... Fix up trivial conflicts in arch/x86/kernel/Makefile arch/x86/mm/init_32.c include/linux/hardirq.h as per Ingo's suggestions.
2008-12-30Merge branch 'master' of ↵Rusty Russell
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
2008-12-28Merge branch 'sched-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (31 commits) sched: fix warning in fs/proc/base.c schedstat: consolidate per-task cpu runtime stats sched: use RCU variant of list traversal in for_each_leaf_rt_rq() sched, cpuacct: export percpu cpuacct cgroup stats sched, cpuacct: refactoring cpuusage_read / cpuusage_write sched: optimize update_curr() sched: fix wakeup preemption clock sched: add missing arch_update_cpu_topology() call sched: let arch_update_cpu_topology indicate if topology changed sched: idle_balance() does not call load_balance_newidle() sched: fix sd_parent_degenerate on non-numa smp machine sched: add uid information to sched_debug for CONFIG_USER_SCHED sched: move double_unlock_balance() higher sched: update comment for move_task_off_dead_cpu sched: fix inconsistency when redistribute per-cpu tg->cfs_rq shares sched/rt: removed unneeded defintion sched: add hierarchical accounting to cpu accounting controller sched: include group statistics in /proc/sched_debug sched: rename SCHED_NO_NO_OMIT_FRAME_POINTER => SCHED_OMIT_FRAME_POINTER sched: clean up SCHED_CPUMASK_ALLOC ...
2008-12-28Merge branch 'tracing-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (241 commits) sched, trace: update trace_sched_wakeup() tracing/ftrace: don't trace on early stage of a secondary cpu boot, v3 Revert "x86: disable X86_PTRACE_BTS" ring-buffer: prevent false positive warning ring-buffer: fix dangling commit race ftrace: enable format arguments checking x86, bts: memory accounting x86, bts: add fork and exit handling ftrace: introduce tracing_reset_online_cpus() helper tracing: fix warnings in kernel/trace/trace_sched_switch.c tracing: fix warning in kernel/trace/trace.c tracing/ring-buffer: remove unused ring_buffer size trace: fix task state printout ftrace: add not to regex on filtering functions trace: better use of stack_trace_enabled for boot up code trace: add a way to enable or disable the stack tracer x86: entry_64 - introduce FTRACE_ frame macro v2 tracing/ftrace: add the printk-msg-only option tracing/ftrace: use preempt_enable_no_resched_notrace in ring_buffer_time_stamp() x86, bts: correctly report invalid bts records ... Fixed up trivial conflict in scripts/recordmcount.pl due to SH bits being already partly merged by the SH merge.
2008-12-26cpumask: Replace cpu_coregroup_map with cpu_coregroup_maskRusty Russell
cpu_coregroup_map returned a cpumask_t: it's going away. (Note, the sched part of this patch won't apply meaningfully to the sched tree, but I'm posting it to show the goal). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Mike Travis <travis@sgi.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Ingo Molnar <mingo@redhat.com>
2008-12-25Merge branches 'timers/clocksource', 'timers/hpet', 'timers/hrtimers', ↵Ingo Molnar
'timers/nohz', 'timers/ntp', 'timers/posixtimers' and 'timers/rtc' into timers/core
2008-12-25Merge commit 'v2.6.28' into core/coreIngo Molnar
2008-12-25sched, trace: update trace_sched_wakeup()Peter Zijlstra
Impact: extend the wakeup tracepoint with the info whether the wakeup was real Add the information needed to distinguish 'real' wakeups from 'false' wakeups. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-25Merge branch 'next' into for-linusJames Morris
2008-12-23sched: nominate preferred wakeup cpu, fixVaidyanathan Srinivasan
Andrew Morton reported: > kernel/sched.c: In function 'schedule': > kernel/sched.c:3679: warning: 'active_balance' may be used uninitialized in this function > > This warning is correct - the code is buggy. In sched.c load_balance_newidle, there's real potential use of uninitialised variable - fix it. Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-19Merge branches 'tracing/ftrace', 'tracing/ring-buffer' and 'tracing/urgent' ↵Ingo Molnar
into tracing/core Conflicts: include/linux/ftrace.h
2008-12-19sched: fix warning in kernel/sched.cIngo Molnar
Impact: fix cpumask conversion bug this warning: kernel/sched.c: In function ‘find_busiest_group’: kernel/sched.c:3429: warning: passing argument 1 of ‘__first_cpu’ from incompatible pointer type shows that we forgot to convert a new patch to the new cpumask APIs. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-19sched: activate active load balancing in new idle cpusVaidyanathan Srinivasan
Impact: tweak task balancing to save power more agressively Active load balancing is a process by which migration thread is woken up on the target CPU in order to pull current running task on another package into this newly idle package. This method is already in use with normal load_balance(), this patch introduces this method to new idle cpus when sched_mc is set to POWERSAVINGS_BALANCE_WAKEUP. This logic provides effective consolidation of short running daemon jobs in a almost idle system The side effect of this patch may be ping-ponging of tasks if the system is moderately utilised. May need to adjust the iterations before triggering. Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-19sched: nominate preferred wakeup cpuVaidyanathan Srinivasan
Impact: extend load-balancing code (no change in behavior yet) When the system utilisation is low and more cpus are idle, then the process waking up from sleep should prefer to wakeup an idle cpu from semi-idle cpu package (multi core package) rather than a completely idle cpu package which would waste power. Use the sched_mc balance logic in find_busiest_group() to nominate a preferred wakeup cpu. This info can be stored in appropriate sched_domain, but updating this info in all copies of sched_domain is not practical. Hence this information is stored in root_domain struct which is one copy per partitioned sched domain. The root_domain can be accessed from each cpu's runqueue and there is one copy per partitioned sched domain. Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-19sched: favour lower logical cpu number for sched_mc balanceVaidyanathan Srinivasan
Impact: change load-balancing direction to match that of irqbalanced Just in case two groups have identical load, prefer to move load to lower logical cpu number rather than the present logic of moving to higher logical number. find_busiest_group() tries to look for a group_leader that has spare capacity to take more tasks and freeup an appropriate least loaded group. Just in case there is a tie and the load is equal, then the group with higher logical number is favoured. This conflicts with user space irqbalance daemon that will move interrupts to lower logical number if the system utilisation is very low. Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-19sched: framework for sched_mc/smt_power_savings=NGautham R Shenoy
Impact: extend range of /sys/devices/system/cpu/sched_mc_power_savings Currently the sched_mc/smt_power_savings variable is a boolean, which either enables or disables topology based power savings. This patch extends the behaviour of the variable from boolean to multivalued, such that based on the value, we decide how aggressively do we want to perform powersavings balance at appropriate sched domain based on topology. Variable levels of power saving tunable would benefit end user to match the required level of power savings vs performance trade-off depending on the system configuration and workloads. This version makes the sched_mc_power_savings global variable to take more values (0,1,2). Later versions can have a single tunable called sched_power_savings instead of sched_{mc,smt}_power_savings. Signed-off-by: Gautham R Shenoy <ego@in.ibm.com> Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-19tracing: fix warnings in kernel/trace/trace_sched_switch.cIngo Molnar
these warnings: kernel/trace/trace_sched_switch.c: In function ‘tracing_sched_register’: kernel/trace/trace_sched_switch.c:96: warning: passing argument 1 of ‘register_trace_sched_wakeup_new’ from incompatible pointer type kernel/trace/trace_sched_switch.c:112: warning: passing argument 1 of ‘unregister_trace_sched_wakeup_new’ from incompatible pointer type kernel/trace/trace_sched_switch.c: In function ‘tracing_sched_unregister’: kernel/trace/trace_sched_switch.c:121: warning: passing argument 1 of ‘unregister_trace_sched_wakeup_new’ from incompatible pointer type Trigger because sched_wakeup_new tracepoints need the same trace signature as sched_wakeup - which was changed recently. Fix it. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-18schedstat: consolidate per-task cpu runtime statsKen Chen
Impact: simplify code When we turn on CONFIG_SCHEDSTATS, per-task cpu runtime is accumulated twice. Once in task->se.sum_exec_runtime and once in sched_info.cpu_time. These two stats are exactly the same. Given that task->se.sum_exec_runtime is always accumulated by the core scheduler, sched_info can reuse that data instead of duplicate the accounting. Signed-off-by: Ken Chen <kenchen@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-16sched, cpuacct: export percpu cpuacct cgroup statsKen Chen
This patch export per-cpu CPU cycle usage for a given cpuacct cgroup. There is a need for a user space monitor daemon to track group CPU usage on per-cpu base. It is also useful for monitoring CFS load balancer behavior by tracking per CPU group usage. Signed-off-by: Ken Chen <kenchen@google.com> Reviewed-by: Li Zefan <lizf@cn.fujitsu.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-16sched, cpuacct: refactoring cpuusage_read / cpuusage_writeKen Chen
Impact: micro-optimize the code on 64-bit architectures In the thread regarding to 'export percpu cpuacct cgroup stats' http://lkml.org/lkml/2008/12/7/13 akpm pointed out that current cpuacct code is inefficient. This patch refactoring the following: * make cpu_rq locking only on 32-bit * change iterator to each_present_cpu instead of each_possible_cpu to make it hotplug friendly. It's a bit of code churn, but I was rewarded with 160 byte code size saving on x86-64 arch and zero code size change on i386. Signed-off-by: Ken Chen <kenchen@google.com> Cc: Paul Menage <menage@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-16sched: fix wakeup preemption clockMike Galbraith
Impact: sharpen the wakeup-granularity to always be against current scheduler time It was possible to do the preemption check against an old time stamp. Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-13Merge ../linux-2.6-x86Rusty Russell
Conflicts: arch/x86/kernel/io_apic.c kernel/sched.c kernel/sched_stats.h
2008-12-13cpumask: change cpumask_scnprintf, cpumask_parse_user, cpulist_parse, and ↵Rusty Russell
cpulist_scnprintf to take pointers. Impact: change calling convention of existing cpumask APIs Most cpumask functions started with cpus_: these have been replaced by cpumask_ ones which take struct cpumask pointers as expected. These four functions don't have good replacement names; fortunately they're rarely used, so we just change them over. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Mike Travis <travis@sgi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: paulus@samba.org Cc: mingo@redhat.com Cc: tony.luck@intel.com Cc: ralf@linux-mips.org Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: cl@linux-foundation.org Cc: srostedt@redhat.com
2008-12-12Merge branch 'sched/core' into cpus4096Ingo Molnar
Conflicts: include/linux/ftrace.h kernel/sched.c
2008-12-12sched: add missing arch_update_cpu_topology() callHeiko Carstens
arch_reinit_sched_domains() used to call arch_update_cpu_topology() via arch_init_sched_domains(). This call got lost with e761b7725234276a802322549cee5255305a0930 ("cpu hotplug, sched: Introduce cpu_active_map and redo sched domain managment (take 2)". So we might end up with outdated and missing cpus in the cpu core maps (architecture used to call arch_reinit_sched_domains if cpu topology changed). This adds a call to arch_update_cpu_topology in partition_sched_domains which gets called whenever scheduling domains get updated. Which is what is supposed to happen when cpu topology changes. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>