summaryrefslogtreecommitdiffstats
path: root/kernel/time
AgeCommit message (Collapse)Author
2013-03-07clockevents: Don't allow dummy broadcast timersMark Rutland
Currently tick_check_broadcast_device doesn't reject clock_event_devices with CLOCK_EVT_FEAT_DUMMY, and may select them in preference to real hardware if they have a higher rating value. In this situation, the dummy timer is responsible for broadcasting to itself, and the core clockevents code may attempt to call non-existent callbacks for programming the dummy, eventually leading to a panic. This patch makes tick_check_broadcast_device always reject dummy timers, preventing this problem. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Jon Medhurst (Tixy) <tixy@linaro.org> Cc: stable@vger.kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-02-28Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management updates from Zhang Rui: "Highlights: - introduction of Dove thermal sensor driver. - introduction of Kirkwood thermal sensor driver. - introduction of intel_powerclamp thermal cooling device driver. - add interrupt and DT support for rcar thermal driver. - add thermal emulation support which allows platform thermal driver to do software/hardware emulation for thermal issues." * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (36 commits) thermal: rcar: remove __devinitconst thermal: return an error on failure to register thermal class Thermal: rename thermal governor Kconfig option to avoid generic naming thermal: exynos: Use the new thermal trend type for quick cooling action. Thermal: exynos: Add support for temperature falling interrupt. Thermal: Dove: Add Themal sensor support for Dove. thermal: Add support for the thermal sensor on Kirkwood SoCs thermal: rcar: add Device Tree support thermal: rcar: remove machine_power_off() from rcar_thermal_notify() thermal: rcar: add interrupt support thermal: rcar: add read/write functions for common/priv data thermal: rcar: multi channel support thermal: rcar: use mutex lock instead of spin lock thermal: rcar: enable CPCTL to use hardware TSC deciding thermal: rcar: use parenthesis on macro Thermal: fix a build warning when CONFIG_THERMAL_EMULATION cleared Thermal: fix a wrong comment thermal: sysfs: Add a new sysfs node emul_temp for thermal emulation PM: intel_powerclamp: off by one in start_power_clamp() thermal: exynos: Miscellaneous fixes to support falling threshold interrupt ...
2013-02-22Merge branch 'core-locking-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core locking changes from Ingo Molnar: "The biggest change is the rwsem lock-steal improvements, both to the assembly optimized and the spinlock based variants. The other notable change is the clean up of the seqlock implementation to be based on the seqcount infrastructure. The rest is assorted smaller debuggability, cleanup and continued -rt locking changes." * 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rwsem-spinlock: Implement writer lock-stealing for better scalability futex: Revert "futex: Mark get_robust_list as deprecated" generic: Use raw local irq variant for generic cmpxchg lockdep: Selftest: convert spinlock to raw spinlock seqlock: Use seqcount infrastructure seqlock: Remove unused functions ntp: Make ntp_lock raw intel_idle: Convert i7300_idle_lock to raw_spinlock locking: Various static lock initializer fixes lockdep: Print more info when MAX_LOCK_DEPTH is exceeded rwsem: Implement writer lock-stealing for better scalability lockdep: Silence warning if CONFIG_LOCKDEP isn't set watchdog: Use local_clock for get_timestamp() lockdep: Rename print_unlock_inbalance_bug() to print_unlock_imbalance_bug() locking/stat: Fix a typo
2013-02-21Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM SoC cleanups from Arnd Bergmann: "A large number of cleanups, all over the platforms. This is dominated largely by the Samsung platforms (s3c, s5p, exynos) and a few of the others moving code out of arch/arm into more appropriate subsystems. The clocksource and irqchip drivers are now abstracted to the point where platforms that are already cleaned up do not need to even specify the driver they use, it can all get configured from the device tree as we do for normal device drivers. The clocksource changes basically touch every single platform in the process. We further clean up the use of platform specific header files here, with the goal of turning more of the platforms over to being "multiplatform" enabled, which implies that they cannot expose their headers to architecture independent code any more. It is expected that no functional changes are part of the cleanup. The overall reduction in total code lines is mostly the result of removing broken and obsolete code." * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (133 commits) ARM: mvebu: correct gated clock documentation ARM: kirkwood: add missing include for nsa310 ARM: exynos: move exynos4210-combiner to drivers/irqchip mfd: db8500-prcmu: update resource passing drivers/db8500-cpufreq: delete dangling include ARM: at91: remove NEOCORE 926 board sunxi: Cleanup the reset code and add meaningful registers defines ARM: S3C24XX: header mach/regs-mem.h local ARM: S3C24XX: header mach/regs-power.h local ARM: S3C24XX: header mach/regs-s3c2412-mem.h local ARM: S3C24XX: Remove plat-s3c24xx directory in arch/arm/ ARM: S3C24XX: transform s3c2443 subirqs into new structure ARM: S3C24XX: modify s3c2443 irq init to initialize all irqs ARM: S3C24XX: move s3c2443 irq code to irq.c ARM: S3C24XX: transform s3c2416 irqs into new structure ARM: S3C24XX: modify s3c2416 irq init to initialize all irqs ARM: S3C24XX: move s3c2416 irq init to common irq code ARM: S3C24XX: Modify s3c_irq_wake to use the hwirq property ARM: S3C24XX: Move irq syscore-ops to irq-pm clocksource: always define CLOCKSOURCE_OF_DECLARE ...
2013-02-19Merge branch 'timers-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer changes from Ingo Molnar: "Main changes: - ntp: Add CONFIG_RTC_SYSTOHC: a generic RTC driver facility complementing the existing CONFIG_RTC_HCTOSYS, which uses NTP to keep the hardware clock updated. - posix-timers: Fix clock_adjtime to always return timex data on success. This is changing the ABI, but no breakage was expected and found - caution is warranted nevertheless. - platform persistent clock improvements/cleanups. - clockevents: refactor timer broadcast handling to be more generic and less duplicated with matching architecture code (mostly ARM motivated.) - various fixes and cleanups" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timers/x86/hpet: Use HPET_COUNTER to specify the hpet counter in vread_hpet() posix-cpu-timers: Fix nanosleep task_struct leak clockevents: Fix generic broadcast for FEAT_C3STOP time, Fix setting of hardware clock in NTP code hrtimer: Prevent hrtimer_enqueue_reprogram race clockevents: Add generic timer broadcast function clockevents: Add generic timer broadcast receiver timekeeping: Switch HAS_PERSISTENT_CLOCK to ALWAYS_USE_PERSISTENT_CLOCK x86/time/rtc: Don't print extended CMOS year when reading RTC x86: Select HAS_PERSISTENT_CLOCK on x86 timekeeping: Add CONFIG_HAS_PERSISTENT_CLOCK option rtc: Skip the suspend/resume handling if persistent clock exist timekeeping: Add persistent_clock_exist flag posix-timers: Fix clock_adjtime to always return timex data on success Round the calculated scale factor in set_cyc2ns_scale() NTP: Add a CONFIG_RTC_SYSTOHC configuration MAINTAINERS: Update John Stultz's email time: create __getnstimeofday for WARNless calls
2013-02-19Merge branch 'sched-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler changes from Ingo Molnar: "Main changes: - scheduler side full-dynticks (user-space execution is undisturbed and receives no timer IRQs) preparation changes that convert the cputime accounting code to be full-dynticks ready, from Frederic Weisbecker. - Initial sched.h split-up changes, by Clark Williams - select_idle_sibling() performance improvement by Mike Galbraith: " 1 tbench pair (worst case) in a 10 core + SMT package: pre 15.22 MB/sec 1 procs post 252.01 MB/sec 1 procs " - sched_rr_get_interval() ABI fix/change. We think this detail is not used by apps (so it's not an ABI in practice), but lets keep it under observation. - misc RT scheduling cleanups, optimizations" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) sched/rt: Add <linux/sched/rt.h> header to <linux/init_task.h> cputime: Remove irqsave from seqlock readers sched, powerpc: Fix sched.h split-up build failure cputime: Restore CPU_ACCOUNTING config defaults for PPC64 sched/rt: Move rt specific bits into new header file sched/rt: Add a tuning knob to allow changing SCHED_RR timeslice sched: Move sched.h sysctl bits into separate header sched: Fix signedness bug in yield_to() sched: Fix select_idle_sibling() bouncing cow syndrome sched/rt: Further simplify pick_rt_task() sched/rt: Do not account zero delta_exec in update_curr_rt() cputime: Safely read cputime of full dynticks CPUs kvm: Prepare to add generic guest entry/exit callbacks cputime: Use accessors to read task cputime stats cputime: Allow dynamic switch between tick/virtual based cputime accounting cputime: Generic on-demand virtual cputime accounting cputime: Move default nsecs_to_cputime() to jiffies based cputime file cputime: Librarize per nsecs resolution cputime definitions cputime: Avoid multiplication overflow on utime scaling context_tracking: Export context state for generic vtime ... Fix up conflict in kernel/context_tracking.c due to comment additions.
2013-02-19ntp: Make ntp_lock rawThomas Gleixner
seconds_overflow() is called from hard interrupt context even on Preempt-RT. This requires the lock to be a raw_spinlock. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-02-14Merge branch 'fortglx/3.9/time' of git://git.linaro.org/people/jstultz/linux ↵Thomas Gleixner
into timers/core
2013-02-12Merge branch 'timers/for-arm' into timers/coreThomas Gleixner
2013-02-12clockevents: Fix generic broadcast for FEAT_C3STOPMark Rutland
Commit 12ad100046: "clockevents: Add generic timer broadcast function" made tick_device_uses_broadcast set up the generic broadcast function for dummy devices (where !tick_device_is_functional(dev)), but neglected to set up the broadcast function for devices that stop in low power states (with the CLOCK_EVT_FEAT_C3STOP flag). When these devices enter low power states they will not have the generic broadcast function assigned, and will bring down the system when an attempt is made to broadcast to them. This patch ensures that the broadcast function is also assigned for devices which require broadcast in low power states. Reported-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Stephen Warren <swarren@nvidia.com> Cc: linux-arm-kernel@lists.infradead.org Cc: nico@linaro.org Cc: Marc.Zyngier@arm.com Cc: Will.Deacon@arm.com Cc: santosh.shilimkar@ti.com Cc: john.stultz@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-02-08time, Fix setting of hardware clock in NTP codePrarit Bhargava
At init time, if the system time is "warped" forward in warp_clock() it will differ from the hardware clock by sys_tz.tz_minuteswest. This time difference is not taken into account when ntp updates the hardware clock, and this causes the system time to jump forward by this offset every reboot. The kernel must take this offset into account when writing the system time to the hardware clock in the ntp code. This patch adds persistent_clock_is_local which indicates that an offset has been applied in warp_clock() and accounts for the "warp" before writing the hardware clock. x86 does not have this problem as rtc writes are software limited to a +/-15 minute window relative to the current rtc time. Other arches, such as powerpc, however do a full synchronization of the system time to the rtc and will see this problem. [v2]: generated against tip/timers/core Signed-off-by: Prarit Bhargava <prarit@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-02-05Merge branch 'nohz/printk-v8' into irq/coreFrederic Weisbecker
Conflicts: kernel/irq_work.c Add support for printk in full dynticks CPU. * Don't stop tick with irq works pending. This fix is generally useful and concerns archs that can't raise self IPIs. * Flush irq works before CPU offlining. * Introduce "lazy" irq works that can wait for the next tick to be executed, unless it's stopped. * Implement klogd wake up using irq work. This removes the ad-hoc printk_tick()/printk_needs_cpu() hooks and make it working even in dynticks mode. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2013-02-04Merge branch 'fortglx/3.9/time' of git://git.linaro.org/people/jstultz/linux ↵Thomas Gleixner
into timers/core Trivial conflict in arch/x86/Kconfig Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-01-31clockevents: Add generic timer broadcast functionMark Rutland
Currently, the timer broadcast mechanism is defined by a function pointer on struct clock_event_device. As the fundamental mechanism for broadcast is architecture-specific, this means that clock_event_device drivers cannot be shared across multiple architectures. This patch adds an (optional) architecture-specific function for timer tick broadcast, allowing drivers which may require broadcast functionality to be shared across multiple architectures. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: linux-arm-kernel@lists.infradead.org Cc: nico@linaro.org Cc: Will.Deacon@arm.com Cc: Marc.Zyngier@arm.com Cc: john.stultz@linaro.org Link: http://lkml.kernel.org/r/1358183124-28461-3-git-send-email-mark.rutland@arm.com Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-01-31clockevents: Add generic timer broadcast receiverMark Rutland
Currently the broadcast mechanism used for timers is abstracted by a function pointer on struct clock_event_device. As the fundamental mechanism for broadcast is architecture-specific, this ties each clock_event_device driver to a single architecture, even where the driver is otherwise generic. This patch adds a standard path for the receipt of timer broadcasts, so drivers and/or architecture backends need not manage redundant lists of timers for the purpose of routing broadcast timer ticks. [tglx: Made the implementation depend on the config switch as well ] Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: linux-arm-kernel@lists.infradead.org Cc: nico@linaro.org Cc: Will.Deacon@arm.com Cc: Marc.Zyngier@arm.com Cc: john.stultz@linaro.org Link: http://lkml.kernel.org/r/1358183124-28461-2-git-send-email-mark.rutland@arm.com Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-01-29timekeeping: Switch HAS_PERSISTENT_CLOCK to ALWAYS_USE_PERSISTENT_CLOCKJohn Stultz
Jason pointed out the HAS_PERSISTENT_CLOCK name isn't quite accurate for the config, as some systems may have the persistent_clock in some cases, but not always. So change the config name to the more clear ALWAYS_USE_PERSISTENT_CLOCK. Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-01-27cputime: Allow dynamic switch between tick/virtual based cputime accountingFrederic Weisbecker
Allow to dynamically switch between tick and virtual based cputime accounting. This way we can provide a kind of "on-demand" virtual based cputime accounting. In this mode, the kernel relies on the context tracking subsystem to dynamically probe on kernel boundaries. This is in preparation for being able to stop the timer tick in more places than just the idle state. Doing so will depend on CONFIG_VIRT_CPU_ACCOUNTING_GEN which makes it possible to account the cputime without the tick by hooking on kernel/user boundaries. Depending whether the tick is stopped or not, we can switch between tick and vtime based accounting anytime in order to minimize the overhead associated to user hooks. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2013-01-17tick: export nohz tick idle symbols for module useJacob Pan
Allow drivers such as intel_powerclamp to use these apis for turning on/off ticks during idle. Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-01-15timekeeping: Add CONFIG_HAS_PERSISTENT_CLOCK optionFeng Tang
Make the persistent clock check a kernel config option, so that some platform can explicitely select it, also make CONFIG_RTC_HCTOSYS and RTC_SYSTOHC depend on its non-existence, which could prevent the persistent clock and RTC code from doing similar thing twice during system's init/suspend/resume phases. If the CONFIG_HAS_PERSISTENT_CLOCK=n, then no change happens for kernel which still does the persistent clock check in timekeeping_init(). Cc: Thomas Gleixner <tglx@linutronix.de> Suggested-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Feng Tang <feng.tang@intel.com> [jstultz: Added dependency for RTC_SYSTOHC as well] Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-01-15timekeeping: Add persistent_clock_exist flagFeng Tang
In current kernel, there are several places which need to check whether there is a persistent clock for the platform. Current check is done by calling the read_persistent_clock() and validating its return value. So one optimization is to do the check only once in timekeeping_init(), and use a flag persistent_clock_exist to record it. v2: Add a has_persistent_clock() helper function, as suggested by John. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-01-15NTP: Add a CONFIG_RTC_SYSTOHC configurationJason Gunthorpe
The purpose of this option is to allow ARM/etc systems that rely on the class RTC subsystem to have the same kind of automatic NTP based synchronization that we have on PC platforms. Today ARM does not implement update_persistent_clock and makes extensive use of the class RTC system. When enabled CONFIG_RTC_SYSTOHC will provide a generic rtc_update_persistent_clock that stores the current time in the RTC and is intended complement the existing CONFIG_RTC_HCTOSYS option that loads the RTC at boot. Like with RTC_HCTOSYS the platform's update_persistent_clock is used first, if it works. Platforms with mixed class RTC and non-RTC drivers need to return ENODEV when class RTC should be used. Such an update for PPC is included in this patch. Long term, implementations of update_persistent_clock should migrate to proper class RTC drivers and use CONFIG_RTC_SYSTOHC instead. Tested on ARM kirkwood and PPC405 Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-01-15time: create __getnstimeofday for WARNless callsKees Cook
The pstore RAM backend can get called during resume, and must be defensive against a suspended time source. Expose getnstimeofday logic that returns an error instead of a WARN. This can be detected and the timestamp can be zeroed out. Reported-by: Doug Anderson <dianders@chromium.org> Cc: John Stultz <johnstul@us.ibm.com> Cc: Anton Vorontsov <anton.vorontsov@linaro.org> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-01-14Merge branch 'clocksource/cleanup' into next/cleanupOlof Johansson
Clockevent cleanup series from Shawn Guo. Resolved move/change conflict in mach-pxa/time.c due to the sys_timer cleanup. * clocksource/cleanup: clocksource: use clockevents_config_and_register() where possible ARM: use clockevents_config_and_register() where possible clockevents: export clockevents_config_and_register for module use + sync to Linux 3.8-rc3 Signed-off-by: Olof Johansson <olof@lixom.net> Conflicts: arch/arm/mach-pxa/time.c
2013-01-14clockevents: export clockevents_config_and_register for module useShawn Guo
clockevents_config_and_register is a handy helper for clockevent drivers, some of which might support module build, so export the symbol. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-12-24time: convert arch_gettimeoffset to a pointerStephen Warren
Currently, whenever CONFIG_ARCH_USES_GETTIMEOFFSET is enabled, each arch core provides a single implementation of arch_gettimeoffset(). In many cases, different sub-architectures, different machines, or different timer providers exist, and so the arch ends up implementing arch_gettimeoffset() as a call-through-pointer anyway. Examples are ARM, Cris, M68K, and it's arguable that the remaining architectures, M32R and Blackfin, should be doing this anyway. Modify arch_gettimeoffset so that it itself is a function pointer, which the arch initializes. This will allow later changes to move the initialization of this function into individual machine support or timer drivers. This is particularly useful for code in drivers/clocksource which should rely on an arch-independant mechanism to register their implementation of arch_gettimeoffset(). This patch also converts the Cris architecture to set arch_gettimeoffset directly to the final implementation in time_init(), because Cris already had separate time_init() functions per sub-architecture. M68K and ARM are converted to set arch_gettimeoffset to the final implementation in later patches, because they already have function pointers in place for this purpose. Cc: Russell King <linux@arm.linux.org.uk> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Mikael Starvik <starvik@axis.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: John Stultz <johnstul@us.ibm.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-12-13Merge tag 'kvm-3.8-1' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM updates from Marcelo Tosatti: "Considerable KVM/PPC work, x86 kvmclock vsyscall support, IA32_TSC_ADJUST MSR emulation, amongst others." Fix up trivial conflict in kernel/sched/core.c due to cross-cpu migration notifier added next to rq migration call-back. * tag 'kvm-3.8-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (156 commits) KVM: emulator: fix real mode segment checks in address linearization VMX: remove unneeded enable_unrestricted_guest check KVM: VMX: fix DPL during entry to protected mode x86/kexec: crash_vmclear_local_vmcss needs __rcu kvm: Fix irqfd resampler list walk KVM: VMX: provide the vmclear function and a bitmap to support VMCLEAR in kdump x86/kexec: VMCLEAR VMCSs loaded on all cpus if necessary KVM: MMU: optimize for set_spte KVM: PPC: booke: Get/set guest EPCR register using ONE_REG interface KVM: PPC: bookehv: Add EPCR support in mtspr/mfspr emulation KVM: PPC: bookehv: Add guest computation mode for irq delivery KVM: PPC: Make EPCR a valid field for booke64 and bookehv KVM: PPC: booke: Extend MAS2 EPN mask for 64-bit KVM: PPC: e500: Mask MAS2 EPN high 32-bits in 32/64 tlbwe emulation KVM: PPC: Mask ea's high 32-bits in 32/64 instr emulation KVM: PPC: e500: Add emulation helper for getting instruction ea KVM: PPC: bookehv64: Add support for interrupt handling KVM: PPC: bookehv: Remove GET_VCPU macro from exception handler KVM: PPC: booke: Fix get_tb() compile error on 64-bit KVM: PPC: e500: Silence bogus GCC warning in tlb code ...
2012-12-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking changes from David Miller: 1) Allow to dump, monitor, and change the bridge multicast database using netlink. From Cong Wang. 2) RFC 5961 TCP blind data injection attack mitigation, from Eric Dumazet. 3) Networking user namespace support from Eric W. Biederman. 4) tuntap/virtio-net multiqueue support by Jason Wang. 5) Support for checksum offload of encapsulated packets (basically, tunneled traffic can still be checksummed by HW). From Joseph Gasparakis. 6) Allow BPF filter access to VLAN tags, from Eric Dumazet and Daniel Borkmann. 7) Bridge port parameters over netlink and BPDU blocking support from Stephen Hemminger. 8) Improve data access patterns during inet socket demux by rearranging socket layout, from Eric Dumazet. 9) TIPC protocol updates and cleanups from Ying Xue, Paul Gortmaker, and Jon Maloy. 10) Update TCP socket hash sizing to be more in line with current day realities. The existing heurstics were choosen a decade ago. From Eric Dumazet. 11) Fix races, queue bloat, and excessive wakeups in ATM and associated drivers, from Krzysztof Mazur and David Woodhouse. 12) Support DOVE (Distributed Overlay Virtual Ethernet) extensions in VXLAN driver, from David Stevens. 13) Add "oops_only" mode to netconsole, from Amerigo Wang. 14) Support set and query of VEB/VEPA bridge mode via PF_BRIDGE, also allow DCB netlink to work on namespaces other than the initial namespace. From John Fastabend. 15) Support PTP in the Tigon3 driver, from Matt Carlson. 16) tun/vhost zero copy fixes and improvements, plus turn it on by default, from Michael S. Tsirkin. 17) Support per-association statistics in SCTP, from Michele Baldessari. And many, many, driver updates, cleanups, and improvements. Too numerous to mention individually. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1722 commits) net/mlx4_en: Add support for destination MAC in steering rules net/mlx4_en: Use generic etherdevice.h functions. net: ethtool: Add destination MAC address to flow steering API bridge: add support of adding and deleting mdb entries bridge: notify mdb changes via netlink ndisc: Unexport ndisc_{build,send}_skb(). uapi: add missing netconf.h to export list pkt_sched: avoid requeues if possible solos-pci: fix double-free of TX skb in DMA mode bnx2: Fix accidental reversions. bna: Driver Version Updated to 3.1.2.1 bna: Firmware update bna: Add RX State bna: Rx Page Based Allocation bna: TX Intr Coalescing Fix bna: Tx and Rx Optimizations bna: Code Cleanup and Enhancements ath9k: check pdata variable before dereferencing it ath5k: RX timestamp is reported at end of frame ath9k_htc: RX timestamp is reported at end of frame ...
2012-12-11Merge branch 'timers-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core timer changes from Ingo Molnar: "It contains continued generic-NOHZ work by Frederic and smaller cleanups." * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: time: Kill xtime_lock, replacing it with jiffies_lock clocksource: arm_generic: use this_cpu_ptr per-cpu helper clocksource: arm_generic: use integer math helpers time/jiffies: Make clocksource_jiffies static clocksource: clean up parse_pmtmr() tick: Correct the comments for tick_sched_timer() tick: Conditionally build nohz specific code in tick handler tick: Consolidate tick handling for high and low res handlers tick: Consolidate timekeeping handling code
2012-12-11Merge branches 'core-locking-for-linus' and 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull trivial fix branches from Ingo Molnar. Cleanup in __get_key_name, and a timer comment fixlet. * 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: lockdep: Use KSYM_NAME_LEN'ed buffer for __get_key_name() * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timers, sched: Correct the comments for tick_sched_timer()
2012-11-27time: export time information for KVM pvclockMarcelo Tosatti
As suggested by John, export time data similarly to how its done by vsyscall support. This allows KVM to retrieve necessary information to implement vsyscall support in KVM guests. Acked-by: John Stultz <johnstul@us.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-11-21Merge branch 'fortglx/3.8/time' of git://git.linaro.org/people/jstultz/linux ↵Thomas Gleixner
into timers/core Fix trivial conflicts in: kernel/time/tick-sched.c Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-11-18printk: Wake up klogd using irq_workFrederic Weisbecker
klogd is woken up asynchronously from the tick in order to do it safely. However if printk is called when the tick is stopped, the reader won't be woken up until the next interrupt, which might not fire for a while. As a result, the user may miss some message. To fix this, lets implement the printk tick using a lazy irq work. This subsystem takes care of the timer tick state and can fix up accordingly. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-11-17irq_work: Don't stop the tick with pending worksFrederic Weisbecker
Don't stop the tick if we have pending irq works on the queue, otherwise if the arch can't raise self-IPIs, we may not find an opportunity to execute the pending works for a while. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-11-17nohz: Add API to check tick stateFrederic Weisbecker
We need some quick way to check if the CPU has stopped its tick. This will be useful to implement the printk tick using the irq work subsystem. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-11-15cpuidle: Quickly notice prediction failure for repeat modeYouquan Song
The prediction for future is difficult and when the cpuidle governor prediction fails and govenor possibly choose the shallower C-state than it should. How to quickly notice and find the failure becomes important for power saving. cpuidle menu governor has a method to predict the repeat pattern if there are 8 C-states residency which are continuous and the same or very close, so it will predict the next C-states residency will keep same residency time. There is a real case that turbostat utility (tools/power/x86/turbostat) at kernel 3.3 or early. turbostat utility will read 10 registers one by one at Sandybridge, so it will generate 10 IPIs to wake up idle CPUs. So cpuidle menu governor will predict it is repeat mode and there is another IPI wake up idle CPU soon, so it keeps idle CPU stay at C1 state even though CPU is totally idle. However, in the turbostat, following 10 registers reading is sleep 5 seconds by default, so the idle CPU will keep at C1 for a long time though it is idle until break event occurs. In a idle Sandybridge system, run "./turbostat -v", we will notice that deep C-state dangles between "70% ~ 99%". After patched the kernel, we will notice deep C-state stays at >99.98%. In the patch, a timer is added when menu governor detects a repeat mode and choose a shallow C-state. The timer is set to a time out value that greater than predicted time, and we conclude repeat mode prediction failure if timer is triggered. When repeat mode happens as expected, the timer is not triggered and CPU waken up from C-states and it will cancel the timer initiatively. When repeat mode does not happen, the timer will be time out and menu governor will quickly notice that the repeat mode prediction fails and then re-evaluates deeper C-states possibility. Below is another case which will clearly show the patch much benefit: #include <stdlib.h> #include <stdio.h> #include <unistd.h> #include <signal.h> #include <sys/time.h> #include <time.h> #include <pthread.h> volatile int * shutdown; volatile long * count; int delay = 20; int loop = 8; void usage(void) { fprintf(stderr, "Usage: idle_predict [options]\n" " --help -h Print this help\n" " --thread -n Thread number\n" " --loop -l Loop times in shallow Cstate\n" " --delay -t Sleep time (uS)in shallow Cstate\n"); } void *simple_loop() { int idle_num = 1; while (!(*shutdown)) { *count = *count + 1; if (idle_num % loop) usleep(delay); else { /* sleep 1 second */ usleep(1000000); idle_num = 0; } idle_num++; } } static void sighand(int sig) { *shutdown = 1; } int main(int argc, char *argv[]) { sigset_t sigset; int signum = SIGALRM; int i, c, er = 0, thread_num = 8; pthread_t pt[1024]; static char optstr[] = "n:l:t:h:"; while ((c = getopt(argc, argv, optstr)) != EOF) switch (c) { case 'n': thread_num = atoi(optarg); break; case 'l': loop = atoi(optarg); break; case 't': delay = atoi(optarg); break; case 'h': default: usage(); exit(1); } printf("thread=%d,loop=%d,delay=%d\n",thread_num,loop,delay); count = malloc(sizeof(long)); shutdown = malloc(sizeof(int)); *count = 0; *shutdown = 0; sigemptyset(&sigset); sigaddset(&sigset, signum); sigprocmask (SIG_BLOCK, &sigset, NULL); signal(SIGINT, sighand); signal(SIGTERM, sighand); for(i = 0; i < thread_num ; i++) pthread_create(&pt[i], NULL, simple_loop, NULL); for (i = 0; i < thread_num; i++) pthread_join(pt[i], NULL); exit(0); } Get powertop V2 from git://github.com/fenrus75/powertop, build powertop. After build the above test application, then run it. Test plaform can be Intel Sandybridge or other recent platforms. #./idle_predict -l 10 & #./powertop We will find that deep C-state will dangle between 40%~100% and much time spent on C1 state. It is because menu governor wrongly predict that repeat mode is kept, so it will choose the C1 shallow C-state even though it has chance to sleep 1 second in deep C-state. While after patched the kernel, we find that deep C-state will keep >99.6%. Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-13time: Kill xtime_lock, replacing it with jiffies_lockJohn Stultz
Now that timekeeping is protected by its own locks, rename the xtime_lock to jifffies_lock to better describe what it protects. CC: Thomas Gleixner <tglx@linutronix.de> CC: Eric Dumazet <eric.dumazet@gmail.com> CC: Richard Cochran <richardcochran@gmail.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2012-11-13time/jiffies: Make clocksource_jiffies staticLars-Peter Clausen
Commit f1b8274 ("clocksource: Cleanup clocksource selection") removed all external references to clocksource_jiffies so there is no need to have the symbol globally visible. Fixes the following sparse warning: CHECK kernel/time/jiffies.c kernel/time/jiffies.c:61:20: warning: symbol 'clocksource_jiffies' was not declared. Should it be static? Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: John Stultz <john.stultz@linaro.org>
2012-11-01time: remove the timecompare code.Richard Cochran
This patch removes the timecompare code from the kernel. The top five reasons to do this are: 1. There are no more users of this code. 2. The original idea was a bit weak. 3. The original author has disappeared. 4. The code was not general purpose but tuned to a particular hardware, 5. There are better ways to accomplish clock synchronization. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Acked-by: John Stultz <john.stultz@linaro.org> Tested-by: Bob Liu <lliubbo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01tick: Correct the comments for tick_sched_timer()Chuansheng Liu
In the comments of function tick_sched_timer(), the sentence "timer->base->cpu_base->lock held" is not right. In function __run_hrtimer(), before call timer->function(), the cpu_base->lock has been unlocked. Signed-off-by: liu chuansheng <chuansheng.liu@intel.com> Cc: fei.li@intel.com Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1351098455.15558.1421.camel@cliu38-desktop-build Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-10-24timers, sched: Correct the comments for tick_sched_timer()Chuansheng Liu
In the comments of function tick_sched_timer(), the sentence "timer->base->cpu_base->lock held" is not right. In function __run_hrtimer(), before call timer->function(), the cpu_base->lock has been unlocked. Signed-off-by: liu chuansheng <chuansheng.liu@intel.com> Cc: fei.li@intel.com Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1351098455.15558.1421.camel@cliu38-desktop-build Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-15tick: Conditionally build nohz specific code in tick handlerFrederic Weisbecker
This optimize a bit the high res tick sched handler. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org>
2012-10-15tick: Consolidate tick handling for high and low res handlersFrederic Weisbecker
Besides unifying code, this also adds the idle check before processing idle accounting specifics on the low res handler. This way we also generalize this part of the nohz code for !CONFIG_HIGH_RES_TIMERS to prepare for the adaptive tickless features. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org>
2012-10-15tick: Consolidate timekeeping handling codeFrederic Weisbecker
Unify the duplicated timekeeping handling code of low and high res tick sched handlers. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org>
2012-10-12Merge branch 'timers-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer core update from Thomas Gleixner: - Bug fixes (one for a longstanding dead loop issue) - Rework of time related vsyscalls - Alarm timer updates - Jiffies updates to remove compile time dependencies * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timekeeping: Cast raw_interval to u64 to avoid shift overflow timers: Fix endless looping between cascade() and internal_add_timer() time/jiffies: bring back unconditional LATCH definition time: Convert x86_64 to using new update_vsyscall time: Only do nanosecond rounding on GENERIC_TIME_VSYSCALL_OLD systems time: Introduce new GENERIC_TIME_VSYSCALL time: Convert CONFIG_GENERIC_TIME_VSYSCALL to CONFIG_GENERIC_TIME_VSYSCALL_OLD time: Move update_vsyscall definitions to timekeeper_internal.h time: Move timekeeper structure to timekeeper_internal.h for vsyscall changes jiffies: Remove compile time assumptions about CLOCK_TICK_RATE jiffies: Kill unused TICK_USEC_TO_NSEC alarmtimer: Rename alarmtimer_remove to alarmtimer_dequeue alarmtimer: Remove unused helpers & defines alarmtimer: Use hrtimer per-alarm instead of per-base alarmtimer: Implement minimum alarm interval for allowing suspend
2012-10-12Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "A CPU hotplug related crash fix and a nohz accounting fixlet." * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Update sched_domains_numa_masks[][] when new cpus are onlined sched: Ensure 'sched_domains_numa_levels' is safe to use in other functions nohz: Fix one jiffy count too far in idle cputime
2012-10-09timekeeping: Cast raw_interval to u64 to avoid shift overflowDan Carpenter
We fixed a bunch of integer overflows in timekeeping code during the 3.6 cycle. I did an audit based on that and found this potential overflow. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: John Stultz <johnstul@us.ibm.com> Link: http://lkml.kernel.org/r/20121009071823.GA19159@elgon.mountain Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org
2012-10-05nohz: Fix one jiffy count too far in idle cputimeFrederic Weisbecker
When we stop the tick in idle, we save the current jiffies value in ts->idle_jiffies. This snapshot is substracted from the later value of jiffies when the tick is restarted and the resulting delta is accounted as idle cputime. This is how we handle the idle cputime accounting without the tick. But sometimes we need to schedule the next tick to some time in the future instead of completely stopping it. In this case, a tick may happen before we restart the periodic behaviour and from that tick we account one jiffy to idle cputime as usual but we also increment the ts->idle_jiffies snapshot by one so that when we compute the delta to account, we substract the one jiffy we just accounted. To prepare for stopping the tick outside idle, we introduced a check that prevents from fixing up that ts->idle_jiffies if we are not running the idle task. But we use idle_cpu() for that and this is a problem if we run the tick while another CPU remotely enqueues a ttwu to our runqueue: CPU 0: CPU 1: tick_sched_timer() { ttwu_queue_remote() if (idle_cpu(CPU 0)) ts->idle_jiffies++; } Here, idle_cpu() notes that &rq->wake_list is not empty and hence won't consider the CPU as idle. As a result, ts->idle_jiffies won't be incremented. But this is wrong because we actually account the current jiffy to idle cputime. And that jiffy won't get substracted from the nohz time delta. So in the end, this jiffy is accounted twice. Fix this by changing idle_cpu(smp_processor_id()) with is_idle_task(current). This way the jiffy is substracted correctly even if a ttwu operation is enqueued on the CPU. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: <stable@vger.kernel.org> # 3.5+ Link: http://lkml.kernel.org/r/1349308004-3482-1-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-02Merge tag 'pm-for-3.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael J Wysocki: - Improved system suspend/resume and runtime PM handling for the SH TMU, CMT and MTU2 clock event devices (also used by ARM/shmobile). - Generic PM domains framework extensions related to cpuidle support and domain objects lookup using names. - ARM/shmobile power management updates including improved support for the SH7372's A4S power domain containing the CPU core. - cpufreq changes related to AMD CPUs support from Matthew Garrett, Andre Przywara and Borislav Petkov. - cpu0 cpufreq driver from Shawn Guo. - cpufreq governor fixes related to the relaxing of limit from Michal Pecio. - OMAP cpufreq updates from Axel Lin and Richard Zhao. - cpuidle ladder governor fixes related to the disabling of states from Carsten Emde and me. - Runtime PM core updates related to the interactions with the system suspend core from Alan Stern and Kevin Hilman. - Wakeup sources modification allowing more helper functions to be called from interrupt context from John Stultz and additional diagnostic code from Todd Poynor. - System suspend error code path fix from Feng Hong. Fixed up conflicts in cpufreq/powernow-k8 that stemmed from the workqueue fixes conflicting fairly badly with the removal of support for hardware P-state chips. The changes were independent but somewhat intertwined. * tag 'pm-for-3.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (76 commits) Revert "PM QoS: Use spinlock in the per-device PM QoS constraints code" PM / Runtime: let rpm_resume() succeed if RPM_ACTIVE, even when disabled, v2 cpuidle: rename function name "__cpuidle_register_driver", v2 cpufreq: OMAP: Check IS_ERR() instead of NULL for omap_device_get_by_hwmod_name cpuidle: remove some empty lines PM: Prevent runtime suspend during system resume PM QoS: Use spinlock in the per-device PM QoS constraints code PM / Sleep: use resume event when call dpm_resume_early cpuidle / ACPI : move cpuidle_device field out of the acpi_processor_power structure ACPI / processor: remove pointless variable initialization ACPI / processor: remove unused function parameter cpufreq: OMAP: remove loops_per_jiffy recalculate for smp sections: fix section conflicts in drivers/cpufreq cpufreq: conservative: update frequency when limits are relaxed cpufreq / ondemand: update frequency when limits are relaxed properly __init-annotate pm_sysrq_init() cpufreq: Add a generic cpufreq-cpu0 driver PM / OPP: Initialize OPP table from device tree ARM: add cpufreq transiton notifier to adjust loops_per_jiffy for smp cpufreq: Remove support for hardware P-state chips from powernow-k8 ...
2012-10-01Merge branch 'sched-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler changes from Ingo Molnar: "Continued quest to clean up and enhance the cputime code by Frederic Weisbecker, in preparation for future tickless kernel features. Other than that, smallish changes." Fix up trivial conflicts due to additions next to each other in arch/{x86/}Kconfig * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) cputime: Make finegrained irqtime accounting generally available cputime: Gather time/stats accounting config options into a single menu ia64: Reuse system and user vtime accounting functions on task switch ia64: Consolidate user vtime accounting vtime: Consolidate system/idle context detection cputime: Use a proper subsystem naming for vtime related APIs sched: cpu_power: enable ARCH_POWER sched/nohz: Clean up select_nohz_load_balancer() sched: Fix load avg vs. cpu-hotplug sched: Remove __ARCH_WANT_INTERRUPTS_ON_CTXSW sched: Fix nohz_idle_balance() sched: Remove useless code in yield_to() sched: Add time unit suffix to sched sysctl knobs sched/debug: Limit sd->*_idx range on sysctl sched: Remove AFFINE_WAKEUPS feature flag s390: Remove leftover account_tick_vtime() header cputime: Consolidate vtime handling on context switch sched: Move cputime code to its own file cputime: Generalize CONFIG_VIRT_CPU_ACCOUNTING tile: Remove SD_PREFER_LOCAL leftover ...
2012-09-25Merge remote-tracking branch 'tip/core/rcu' into next.2012.09.25bPaul E. McKenney
Resolved conflict in kernel/sched/core.c using Peter Zijlstra's approach from https://lkml.org/lkml/2012/9/5/585.