summaryrefslogtreecommitdiffstats
path: root/kernel/time
AgeCommit message (Collapse)Author
2011-04-18posix clocks: Replace mutex with reader/writer semaphoreRichard Cochran
A dynamic posix clock is protected from asynchronous removal by a mutex. However, using a mutex has the unwanted effect that a long running clock operation in one process will unnecessarily block other processes. For example, one process might call read() to get an external time stamp coming in at one pulse per second. A second process calling clock_gettime would have to wait for almost a whole second. This patch fixes the issue by using a reader/writer semaphore instead of a mutex. Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Cc: John Stultz <john.stultz@linaro.org> Link: http://lkml.kernel.org/r/%3C20110330132421.GA31771%40riccoc20.at.omicron.at%3E Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-04-07Merge branch 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6Linus Torvalds
* 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6: Fix common misspellings
2011-04-04ntp: fix non privileged system time shiftingRichard Cochran
The ADJ_SETOFFSET bit added in commit 094aa188 ("ntp: Add ADJ_SETOFFSET mode bit") also introduced a way for any user to change the system time. Sneaky or buggy calls to adjtimex() could set ADJ_OFFSET_SS_READ | ADJ_SETOFFSET which would result in a successful call to timekeeping_inject_offset(). This patch fixes the issue by adding the capability check. Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-23timekeeping: Use syscore_ops instead of sysdev class and sysdevRafael J. Wysocki
The timekeeping subsystem uses a sysdev class and a sysdev for executing timekeeping_suspend() after interrupts have been turned off on the boot CPU (during system suspend) and for executing timekeeping_resume() before turning on interrupts on the boot CPU (during system resume). However, since both of these functions ignore their arguments, the entire mechanism may be replaced with a struct syscore_ops object which is simpler. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-15Merge branch 'timers-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (62 commits) posix-clocks: Check write permissions in posix syscalls hrtimer: Remove empty hrtimer_init_hres_timer() hrtimer: Update hrtimer->state documentation hrtimer: Update base[CLOCK_BOOTTIME].offset correctly timers: Export CLOCK_BOOTTIME via the posix timers interface timers: Add CLOCK_BOOTTIME hrtimer base time: Extend get_xtime_and_monotonic_offset() to also return sleep time: Introduce get_monotonic_boottime and ktime_get_boottime hrtimers: extend hrtimer base code to handle more then 2 clockids ntp: Remove redundant and incorrect parameter check mn10300: Switch do_timer() to xtimer_update() posix clocks: Introduce dynamic clocks posix-timers: Cleanup namespace posix-timers: Add support for fd based clocks x86: Add clock_adjtime for x86 posix-timers: Introduce a syscall for clock tuning. time: Splitout compat timex accessors ntp: Add ADJ_SETOFFSET mode bit time: Introduce timekeeping_inject_offset posix-timer: Update comment ... Fix up new system-call-related conflicts in arch/x86/ia32/ia32entry.S arch/x86/include/asm/unistd_32.h arch/x86/include/asm/unistd_64.h arch/x86/kernel/syscall_table_32.S (name_to_handle_at()/open_by_handle_at() vs clock_adjtime()), and some due to movement of get_jiffies_64() in: kernel/time.c
2011-03-12posix-clocks: Check write permissions in posix syscallsTorben Hohn
pc_clock_settime() and pc_clock_adjtime() do not check whether the fd was opened in write mode, so a clock can be set with a read only fd. [ tglx: We deliberately do not return -EPERM as we want this to be distingushable from the capability based permission check ] Signed-off-by: Torben Hohn <torbenh@gmx.de> LKML-Reference: <1299173174-348-4-git-send-email-torbenh@gmx.de> Cc: Richard Cochran <richard.cochran@omicron.at> Cc: John Stultz <johnstul@us.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de>
2011-02-26clockevents: Prevent oneshot mode when broadcast device is periodicThomas Gleixner
When the per cpu timer is marked CLOCK_EVT_FEAT_C3STOP, then we only can switch into oneshot mode, when the backup broadcast device supports oneshot mode as well. Otherwise we would try to switch the broadcast device into an unsupported mode unconditionally. This went unnoticed so far as the current available broadcast devices support oneshot mode. Seth unearthed this problem while debugging and working around an hpet related BIOS wreckage. Add the necessary check to tick_is_oneshot_available(). Reported-and-tested-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <alpine.LFD.2.00.1102252231200.2701@localhost6.localdomain6> Cc: stable@kernel.org # .21 ->
2011-02-21time: Extend get_xtime_and_monotonic_offset() to also return sleepJohn Stultz
Extend get_xtime_and_monotonic_offset to get_xtime_and_monotonic_and_sleep_offset(). CC: Jamie Lokier <jamie@shareable.org> CC: Thomas Gleixner <tglx@linutronix.de> CC: Alexander Shishkin <virtuoso@slind.org> CC: Arve Hjønnevåg <arve@android.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2011-02-21time: Introduce get_monotonic_boottime and ktime_get_boottimeJohn Stultz
This adds new functions that return the monotonic time since boot (in other words, CLOCK_MONOTONIC + suspend time). CC: Jamie Lokier <jamie@shareable.org> CC: Thomas Gleixner <tglx@linutronix.de> CC: Alexander Shishkin <virtuoso@slind.org> CC: Arve Hjønnevåg <arve@android.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2011-02-18ntp: Remove redundant and incorrect parameter checkRichard Cochran
The ADJ_SETOFFSET code redundantly checks the range of the nanoseconds field of the time value. This field is checked again in the subsequent call to timekeeping_inject_offset(). Also, as is, the check will not detect whether the number of microseconds is out of range. Let timekeeping_inject_offset() do the error checking. Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Cc: johnstul@us.ibm.com LKML-Reference: <20110218090724.GA2924@riccoc20.at.omicron.at> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-12timer debug: Hide kernel addresses via %pK in /proc/timer_listKees Cook
In the continuing effort to avoid kernel addresses leaking to unprivileged users, this patch switches to %pK for /proc/timer_list reporting. Signed-off-by: Kees Cook <kees.cook@canonical.com> Cc: John Stultz <johnstul@us.ibm.com> Cc: Dan Rosenberg <drosenberg@vsecurity.com> Cc: Eugene Teo <eugeneteo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <20110212032125.GA23571@outflux.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-02posix clocks: Introduce dynamic clocksRichard Cochran
This patch adds support for adding and removing posix clocks. The clock lifetime cycle is patterned after usb devices. Each clock is represented by a standard character device. In addition, the driver may optionally implement custom character device operations. The posix clock and timer system calls listed below now work with dynamic posix clocks, as well as the traditional static clocks. The following system calls are affected: - clock_adjtime (brand new syscall) - clock_gettime - clock_getres - clock_settime - timer_create - timer_delete - timer_gettime - timer_settime [ tglx: Adapted to the posix-timer cleanup. Moved clock_posix_dynamic to posix-clock.c and made all referenced functions static ] Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Acked-by: John Stultz <johnstul@us.ibm.com> LKML-Reference: <20110201134420.164172635@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-02ntp: Add ADJ_SETOFFSET mode bitRichard Cochran
This patch adds a new mode bit into the timex structure. When set, the bit instructs the kernel to add the given time value to the current time. Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Acked-by: John Stultz <johnstul@us.ibm.com> LKML-Reference: <20110201134320.688829863@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-02time: Introduce timekeeping_inject_offsetJohn Stultz
This adds a kernel-internal timekeeping interface to add or subtract a fixed amount from CLOCK_REALTIME. This makes it so kernel users or interfaces trying to do so do not have to read the time, then add an offset and then call settimeofday(), which adds some extra error in comparision to just simply adding the offset in the kernel timekeeping core. Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Richard Cochran <richard.cochran@omicron.at> LKML-Reference: <20110201134419.584311693@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-02time: Correct the *settime* parametersRichard Cochran
Both settimeofday() and clock_settime() promise with a 'const' attribute not to alter the arguments passed in. This patch adds the missing 'const' attribute into the various kernel functions implementing these calls. Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Acked-by: John Stultz <johnstul@us.ibm.com> LKML-Reference: <20110201134417.545698637@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-01time: Fix legacy arch falloutThomas Gleixner
The xtime/dotimer cleanup broke architectures which do not implement clockevents. Time to send out another __do_IRQ threat. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reported-by: Ingo Molnar <mingo@elte.hu> Cc: Torben Hohn <torbenh@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: johnstul@us.ibm.com Cc: yong.zhang0@gmail.com Cc: hch@infradead.org LKML-Reference: <20110127145905.23248.30458.stgit@localhost> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-31time: Make do_timer() and xtime_lock local to kernel/time/Torben Hohn
All callers of do_timer() are converted to xtime_update(). The only users of xtime_lock are in kernel/time/. Make both local to kernel/time/ and remove them from the global header files. [ tglx: Reuse tick-internal.h instead of creating another local header file. Massaged changelog ] Signed-off-by: Torben Hohn <torbenh@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: johnstul@us.ibm.com Cc: yong.zhang0@gmail.com Cc: hch@infradead.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-01-31time: Provide xtime_update()Torben Hohn
xtime_update() takes xtime_lock write locked and calls do_timer(). Provided to replace the do_timer() calls in the architecture code. Signed-off-by: Torben Hohn <torbenh@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: johnstul@us.ibm.com Cc: yong.zhang0@gmail.com Cc: hch@infradead.org LKML-Reference: <20110127145910.23248.21379.stgit@localhost> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-01-31time: Remove unused __get_wall_to_monotonic()Thomas Gleixner
No users left. Remove it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-01-31time: Provide get_xtime_and_monotonic_offset()Torben Hohn
The hrtimer code accesses timekeeping variables under xtime_lock. Provide a sensible accessor function and use it. [ tglx: Removed the conditionals, unused variable, fixed codingstyle and massaged changelog ] Signed-off-by: Torben Hohn <torbenh@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: johnstul@us.ibm.com Cc: yong.zhang0@gmail.com Cc: hch@infradead.org LKML-Reference: <20110127145905.23248.30458.stgit@localhost> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-01-31time: Move get_jiffies_64 to kernel/time/jiffies.cTorben Hohn
Move the jiffies access functions to the jiffies clocksource code. [ tglx: Add missing include ] Signed-off-by: Torben Hohn <torbenh@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: johnstul@us.ibm.com Cc: yong.zhang0@gmail.com Cc: hch@infradead.org LKML-Reference: <20110127145900.23248.73352.stgit@localhost> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-01-31time: Move do_timer() to kernel/time/timekeeping.cTorben Hohn
do_timer() is primary timekeeping related. calc_global_load() is called from do_timer() as well, but that's more for historical reasons. [ tglx: Fixed up the calc_global_load() reject andmassaged changelog ] Signed-off-by: Torben Hohn <torbenh@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: johnstul@us.ibm.com Cc: yong.zhang0@gmail.com Cc: hch@infradead.org LKML-Reference: <20110127145855.23248.56933.stgit@localhost> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-01-19hrtimers: Notify hrtimer users of switches to NOHZ modeStephen Boyd
When NOHZ=y and high res timers are disabled (via cmdline or Kconfig) tick_nohz_switch_to_nohz() will notify the user about switching into NOHZ mode. Nothing is printed for the case where HIGH_RES_TIMERS=y. Fix this for the HIGH_RES_TIMERS=y case by duplicating the printk from the low res NOHZ path in the high res NOHZ path. This confused me since I was thinking 'dmesg | grep -i NOHZ' would tell me if NOHZ was enabled, but if I have hrtimers there is nothing. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1295419594-13085-1-git-send-email-sboyd@codeaurora.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-15Merge branches 'core-fixes-for-linus', 'x86-fixes-for-linus', ↵Linus Torvalds
'timers-fixes-for-linus' and 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: rcu: avoid pointless blocked-task warnings rcu: demote SRCU_SYNCHRONIZE_DELAY from kernel-parameter status rtmutex: Fix comment about why new_owner can be NULL in wake_futex_pi() * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, olpc: Add missing Kconfig dependencies x86, mrst: Set correct APB timer IRQ affinity for secondary cpu x86: tsc: Fix calibration refinement conditionals to avoid divide by zero x86, ia64, acpi: Clean up x86-ism in drivers/acpi/numa.c * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: timekeeping: Make local variables static time: Rename misnamed minsec argument of clocks_calc_mult_shift() * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: tracing: Remove syscall_exit_fields tracing: Only process module tracepoints once perf record: Add "nodelay" mode, disabled by default perf sched: Fix list of events, dropping unsupported ':r' modifier Revert "perf tools: Emit clearer message for sys_perf_event_open ENOENT return" perf top: Fix annotate segv perf evsel: Fix order of event list deletion
2011-01-13Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits) Documentation/trace/events.txt: Remove obsolete sched_signal_send. writeback: fix global_dirty_limits comment runtime -> real-time ppc: fix comment typo singal -> signal drivers: fix comment typo diable -> disable. m68k: fix comment typo diable -> disable. wireless: comment typo fix diable -> disable. media: comment typo fix diable -> disable. remove doc for obsolete dynamic-printk kernel-parameter remove extraneous 'is' from Documentation/iostats.txt Fix spelling milisec -> ms in snd_ps3 module parameter description Fix spelling mistakes in comments Revert conflicting V4L changes i7core_edac: fix typos in comments mm/rmap.c: fix comment sound, ca0106: Fix assignment to 'channel'. hrtimer: fix a typo in comment init/Kconfig: fix typo anon_inodes: fix wrong function name in comment fix comment typos concerning "consistent" poll: fix a typo in comment ... Fix up trivial conflicts in: - drivers/net/wireless/iwlwifi/iwl-core.c (moved to iwl-legacy.c) - fs/ext4/ext4.h Also fix missed 'diabled' typo in drivers/net/bnx2x/bnx2x.h while at it.
2011-01-13pps: capture MONOTONIC_RAW timestamps as wellAlexander Gordeev
MONOTONIC_RAW clock timestamps are ideally suited for frequency calculation and also fit well into the original NTP hardpps design. Now phase and frequency can be adjusted separately: the former based on REALTIME clock and the latter based on MONOTONIC_RAW clock. A new function getnstime_raw_and_real is added to timekeeping subsystem to capture both timestamps at the same time and atomically. Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su> Acked-by: John Stultz <johnstul@us.ibm.com> Cc: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13ntp: add hardpps implementationAlexander Gordeev
This commit adds hardpps() implementation based upon the original one from the NTPv4 reference kernel code from David Mills. However, it is highly optimized towards very fast syncronization and maximum stickness to PPS signal. The typical error is less then a microsecond. To make it sync faster I had to throw away exponential phase filter so that the full phase offset is corrected immediately. Then I also had to throw away median phase filter because it gives a bigger error itself if used without exponential filter. Maybe we will find an appropriate filtering scheme in the future but it's not necessary if the signal quality is ok. Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su> Acked-by: John Stultz <johnstul@us.ibm.com> Cc: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-12timekeeping: Make local variables staticH Hartley Sweeten
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: John Stultz <johnstul@us.ibm.com> LKML-Reference: <0D753D10438DA54287A00B027084269764CE0E54B7@AUSP01VMBX24.collaborationhost.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-01-12time: Rename misnamed minsec argument of clocks_calc_mult_shift()Nicolas Pitre
The minsec argument to clocks_calc_mult_shift() is misnamed. It is used to clamp the magnitude of the mult factor so that a multiplication with any value in the given range won't overflow a 64 bit result. Let's rename it to match the actual usage. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: John Stultz <johnstul@us.ibm.com> LKML-Reference: <alpine.LFD.2.00.1101111207140.17086@xanadu.home> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-01-07Merge branch 'for-2.6.38' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu * 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (30 commits) gameport: use this_cpu_read instead of lookup x86: udelay: Use this_cpu_read to avoid address calculation x86: Use this_cpu_inc_return for nmi counter x86: Replace uses of current_cpu_data with this_cpu ops x86: Use this_cpu_ops to optimize code vmstat: User per cpu atomics to avoid interrupt disable / enable irq_work: Use per cpu atomics instead of regular atomics cpuops: Use cmpxchg for xchg to avoid lock semantics x86: this_cpu_cmpxchg and this_cpu_xchg operations percpu: Generic this_cpu_cmpxchg() and this_cpu_xchg support percpu,x86: relocate this_cpu_add_return() and friends connector: Use this_cpu operations xen: Use this_cpu_inc_return taskstats: Use this_cpu_ops random: Use this_cpu_inc_return fs: Use this_cpu_inc_return in buffer.c highmem: Use this_cpu_xx_return() operations vmstat: Use this_cpu_inc_return for vm statistics x86: Support for this_cpu_add, sub, dec, inc_return percpu: Generic support for this_cpu_add, sub, dec, inc_return ... Fixed up conflicts: in arch/x86/kernel/{apic/nmi.c, apic/x2apic_uv_x.c, process.c} as per Tejun.
2011-01-06Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (416 commits) ARM: DMA: add support for DMA debugging ARM: PL011: add DMA burst threshold support for ST variants ARM: PL011: Add support for transmit DMA ARM: PL011: Ensure IRQs are disabled in UART interrupt handler ARM: PL011: Separate hardware FIFO size from TTY FIFO size ARM: PL011: Allow better handling of vendor data ARM: PL011: Ensure error flags are clear at startup ARM: PL011: include revision number in boot-time port printk ARM: vexpress: add sched_clock() for Versatile Express ARM i.MX53: Make MX53 EVK bootable ARM i.MX53: Some bug fix about MX53 MSL code ARM: 6607/1: sa1100: Update platform device registration ARM: 6606/1: sa1100: Fix platform device registration ARM i.MX51: rename IPU irqs ARM i.MX51: Add ipu clock support ARM: imx/mx27_3ds: Add PMIC support ARM: DMA: Replace page_to_dma()/dma_to_page() with pfn_to_dma()/dma_to_pfn() mx51: fix usb clock support MX51: Add support for usb host 2 arch/arm/plat-mxc/ehci.c: fix errors/typos ...
2010-12-22Fix rounding in clocks_calc_mult_shift()john stultz
Russell King reports: | On the ARM dev boards, we have a 32-bit counter running at 24MHz. Calling | clocks_calc_mult_shift(&mult, &shift, 24MHz, NSEC_PER_SEC, 60) gives | us a multiplier of 2796202666 and a shift of 26. | | Over a large counter delta, this produces an error - lets take a count | from 362976315 to 4280663372: | | (4280663372-362976315) * 2796202666 / 2^26 - (4280663372-362976315) * (1000/24) | => -38.91872422891230269990 | | Can we do better? | | (4280663372-362976315) * 2796202667 / 2^26 - (4280663372-362976315) * (1000/24) | 19.45936211449532822051 | | which is about twice as good as the 2796202666 multiplier. | | Looking at the equivalent divisions obtained, 2796202666 / 2^26 gives | 41.66666665673255920410ns per tick, whereas 2796202667 / 2^26 gives | 41.66666667163372039794ns. The actual value wanted is 1000/24 = | 41.66666666666666666666ns. Fix this by ensuring we round to nearest when calculating the multiplier. Signed-off-by: John Stultz <john.stultz@linaro.org> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Will Deacon <will.deacon@arm.com> Tested-by: Mikael Pettersson <mikpe@it.uu.se> Tested-by: Eric Miao <eric.y.miao@gmail.com> Tested-by: Olof Johansson <olof@lixom.net> Tested-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-17core: Replace __get_cpu_var with __this_cpu_read if not used for an address.Christoph Lameter
__get_cpu_var() can be replaced with this_cpu_read and will then use a single read instruction with implied address calculation to access the correct per cpu instance. However, the address of a per cpu variable passed to __this_cpu_read() cannot be determined (since it's an implied address conversion through segment prefixes). Therefore apply this only to uses of __get_cpu_var where the address of the variable is not used. Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Hugh Dickins <hughd@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2010-12-10hrtimers: Convert hrtimers to use timerlist infrastructureJohn Stultz
Converts the hrtimer code to use the new timerlist infrastructure Signed-off-by: John Stultz <john.stultz@linaro.org> LKML Reference: <1290136329-18291-3-git-send-email-john.stultz@linaro.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> CC: Alessandro Zummo <a.zummo@towertech.it> CC: Thomas Gleixner <tglx@linutronix.de> CC: Richard Cochran <richardcochran@gmail.com>
2010-11-01tree-wide: fix comment/printk typosUwe Kleine-König
"gadget", "through", "command", "maintain", "maintain", "controller", "address", "between", "initiali[zs]e", "instead", "function", "select", "already", "equal", "access", "management", "hierarchy", "registration", "interest", "relative", "memory", "offset", "already", Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-21time: Use ARRAY_SIZE macro in timecompare.cNikitas Angelinas
Replace sizeof(buffer)/sizeof(buffer[0]) with ARRAY_SIZE(buffer) in kernel/time/timecompare.c Signed-off-by: Nikitas Angelinas <nikitasangelinas@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-10-21time: Compensate for rounding on odd-frequency clocksourcesKasper Pedersen
When the clocksource is not a multiple of HZ, the clock will be off. For acpi_pm, HZ=1000 the error is 127.111 ppm: The rounding of cycle_interval ends up generating a false error term in ntp_error accumulation since xtime_interval is not exactly 1/HZ. So, we subtract out the error caused by the rounding. This has been visible since 2.6.32-rc2 commit a092ff0f90cae22b2ac8028ecd2c6f6c1a9e4601 time: Implement logarithmic time accumulation That commit raised NTP_INTERVAL_FREQ and exposed the rounding error. testing tool: http://n1.taur.dk/permanent/testpmt.c Also tested with ntpd and a frequency counter. Signed-off-by: Kasper Pedersen <kkp2010@kasperkp.dk> Acked-by: john stultz <johnstul@us.ibm.com> Cc: John Kacur <jkacur@redhat.com> Cc: Clark Williams <williams@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-09-09ntp: Clamp PLL update intervalMiroslav Lichvar
Clamp update interval to reduce PLL gain with low sampling rate (e.g. intermittent network connection) to avoid instability. The clamp roughly corresponds to the loop time constant, it's 8 * poll interval for SHIFT_PLL 2 and 32 * poll interval for SHIFT_PLL 4. This gives good results without affecting the gain in normal conditions where ntpd skips only up to seven consecutive samples. Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Acked-by: john stultz <johnstul@us.ibm.com> LKML-Reference: <1283870626-9472-1-git-send-email-mlichvar@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-08-13time: Workaround gcc loop optimization that causes 64bit div errorsJohn Stultz
Early 4.3 versions of gcc apparently aggressively optimize the raw time accumulation loop, replacing it with a divide. On 32bit systems, this causes the following link errors: undefined reference to `__umoddi3' undefined reference to `__udivdi3' The gcc issue has been fixed in 4.4 and greater. This patch replaces the accumulation loop with a do_div, as suggested by Linus. Signed-off-by: John Stultz <johnstul@us.ibm.com> CC: Jason Wessel <jason.wessel@windriver.com> CC: Larry Finger <Larry.Finger@lwfinger.net> CC: Ingo Molnar <mingo@elte.hu> CC: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-12timekeeping: Fix overflow in rawtime tv_nsec on 32 bit archsJason Wessel
The tv_nsec is a long and when added to the shifted interval it can wrap and become negative which later causes looping problems in the getrawmonotonic(). The edge case occurs when the system has slept for a short period of time of ~2 seconds. A trace printk of the values in this patch illustrate the problem: ftrace time stamp: log 43.716079: logarithmic_accumulation: raw: 3d0913 tv_nsec d687faa 43.718513: logarithmic_accumulation: raw: 3d0913 tv_nsec da588bd 43.722161: logarithmic_accumulation: raw: 3d0913 tv_nsec de291d0 46.349925: logarithmic_accumulation: raw: 7a122600 tv_nsec e1f9ae3 46.349930: logarithmic_accumulation: raw: 1e848980 tv_nsec 8831c0e3 The kernel starts looping at 46.349925 in the getrawmonotonic() due to the negative value from adding the raw value to tv_nsec. A simple solution is to accumulate into a u64, and then normalize it to a timespec_t. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> [ Reworked variable names and simplified some of the code. - John ] Signed-off-by: John Stultz <johnstul@us.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-06Merge branch 'timers-timekeeping-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-timekeeping-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: um: Fix read_persistent_clock fallout kgdb: Do not access xtime directly powerpc: Clean up obsolete code relating to decrementer and timebase powerpc: Rework VDSO gettimeofday to prevent time going backwards clocksource: Add __clocksource_updatefreq_hz/khz methods x86: Convert common clocksources to use clocksource_register_hz/khz timekeeping: Make xtime and wall_to_monotonic static hrtimer: Cleanup direct access to wall_to_monotonic um: Convert to use read_persistent_clock timkeeping: Fix update_vsyscall to provide wall_to_monotonic offset powerpc: Cleanup xtime usage powerpc: Simplify update_vsyscall time: Kill off CONFIG_GENERIC_TIME time: Implement timespec_add x86: Fix vtime/file timestamp inconsistencies Trivial conflicts in Documentation/feature-removal-schedule.txt Much less trivial conflicts in arch/powerpc/kernel/time.c resolved as per Thomas' earlier merge commit 47916be4e28c ("Merge branch 'powerpc.cherry-picks' into timers/clocksource")
2010-08-06Merge branch 'timers-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: Documentation: Add timers/timers-howto.txt timer: Added usleep_range timer Revert "timer: Added usleep[_range] timer" clockevents: Remove the per cpu tick skew posix_timer: Move copy_to_user(created_timer_id) down in timer_create() timer: Added usleep[_range] timer timers: Document meaning of deferrable timer
2010-08-06Merge branch 'sched-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (27 commits) sched: Use correct macro to display sched_child_runs_first in /proc/sched_debug sched: No need for bootmem special cases sched: Revert nohz_ratelimit() for now sched: Reduce update_group_power() calls sched: Update rq->clock for nohz balanced cpus sched: Fix spelling of sibling sched, cpuset: Drop __cpuexit from cpu hotplug callbacks sched: Fix the racy usage of thread_group_cputimer() in fastpath_timer_check() sched: run_posix_cpu_timers: Don't check ->exit_state, use lock_task_sighand() sched: thread_group_cputime: Simplify, document the "alive" check sched: Remove the obsolete exit_state/signal hacks sched: task_tick_rt: Remove the obsolete ->signal != NULL check sched: __sched_setscheduler: Read the RLIMIT_RTPRIO value lockless sched: Fix comments to make them DocBook happy sched: Fix fix_small_capacity powerpc: Exclude arch_sd_sibiling_asym_packing() on UP powerpc: Enable asymmetric SMT scheduling on POWER7 sched: Add asymmetric group packing option for sibling domain sched: Fix capacity calculations for SMT4 sched: Change nohz idle load balancing logic to push model ...
2010-08-05Merge branch 'sched/urgent' into sched/coreIngo Molnar
Conflicts: include/linux/sched.h Merge reason: Add the leftover .35 urgent bits, fix the conflict. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-08-04Merge branch 'master' into for-nextJiri Kosina
2010-08-02clockevents: Remove the per cpu tick skewArjan van de Ven
Historically, Linux has tried to make the regular timer tick on the various CPUs not happen at the same time, to avoid contention on xtime_lock. Nowadays, with the tickless kernel, this contention no longer happens since time keeping and updating are done differently. In addition, this skew is actually hurting power consumption in a measurable way on many-core systems. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> LKML-Reference: <20100727210210.58d3118c@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-07-27clocksource: Add __clocksource_updatefreq_hz/khz methodsJohn Stultz
To properly handle clocksources that change frequencies at the clocksource->enable() point, this patch adds a method that will update the clocksource's mult/shift and max_idle_ns values. Signed-off-by: John Stultz <johnstul@us.ibm.com> LKML-Reference: <1279068988-21864-12-git-send-email-johnstul@us.ibm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-07-27timekeeping: Make xtime and wall_to_monotonic staticJohn Stultz
This patch makes xtime and wall_to_monotonic static, as planned in Documentation/feature-removal-schedule.txt. This will allow for further cleanups to the timekeeping core. Signed-off-by: John Stultz <johnstul@us.ibm.com> LKML-Reference: <1279068988-21864-10-git-send-email-johnstul@us.ibm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-07-27hrtimer: Cleanup direct access to wall_to_monotonicJohn Stultz
Provides an accessor function to replace hrtimer.c's direct access of wall_to_monotonic. This will allow wall_to_monotonic to be made static as planned in Documentation/feature-removal-schedule.txt Signed-off-by: John Stultz <johnstul@us.ibm.com> LKML-Reference: <1279068988-21864-9-git-send-email-johnstul@us.ibm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>