| Age | Commit message (Collapse) | Author |
|---|
|
The first entry of the ftrace profile was always skipped when
reading trace_stat/functionX.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A443D59.4080307@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
In hunting down the cause for the hwlat_detector ring buffer spew in
my failed -next builds it became obvious that folks are now treating
ring_buffer as something that is generic independent of tracing and thus,
suitable for public driver consumption.
Given that there are only a few minor areas in ring_buffer that have any
reliance on CONFIG_TRACING or CONFIG_FUNCTION_TRACER, provide stubs for
those and make it generally available.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Cc: Jon Masters <jcm@jonmasters.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20090625053012.GB19944@linux-sh.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Before:
# echo 'sys_open:traceon:' > set_ftrace_filter
# echo 'sys_close:traceoff:5' > set_ftrace_filter
# cat set_ftrace_filter
#### all functions enabled ####
sys_open:traceon:unlimited
sys_close:traceoff:count=0
After:
# cat set_ftrace_filter
#### all functions enabled ####
sys_open:traceon:unlimited
sys_close:traceoff:count=0
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A4313A7.7030105@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
We should be able to specify [KMG] when setting trace_buf_size
boot option, as documented in kernel-parameters.txt
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A41F2DB.4020102@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
When the output of set_ftrace_filter is larger than PAGE_SIZE,
t_hash_start() will be called the 2nd time, and then we start
from the head of a hlist, which is wrong and causes some entries
to be outputed twice.
The worse is, if the hlist is large enough, reading set_ftrace_filter
won't stop but in a dead loop.
Reviewed-by: Liming Wang <liming.wang@windriver.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A41876E.2060407@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
It's rather confusing that in t_start(), in some cases @pos is
incremented, and in some cases it's decremented and then incremented.
This patch rewrites t_start() in a much more general way.
Thus we fix a bug that if ftrace_filtered == 1, functions have tracer
hooks won't be printed, because the branch is always unreachable:
static void *t_start(...)
{
...
if (!p)
return t_hash_start(m, pos);
return p;
}
Before:
# echo 'sys_open' > /mnt/tracing/set_ftrace_filter
# echo 'sys_write:traceon:4' >> /mnt/tracing/set_ftrace_filter
sys_open
After:
# echo 'sys_open' > /mnt/tracing/set_ftrace_filter
# echo 'sys_write:traceon:4' >> /mnt/tracing/set_ftrace_filter
sys_open
sys_write:traceon:count=4
Reviewed-by: Liming Wang <liming.wang@windriver.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A41874B.4090507@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
It's wrong to increment @pos in g_start(). It causes some entries
lost when reading set_graph_function, if the output of the file
is larger than PAGE_SIZE.
Reviewed-by: Liming Wang <liming.wang@windriver.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A418738.7090401@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
The iterator is m->private, but it's not reset to trace_types in
t_start(). If the output is larger than PAGE_SIZE and t_start()
is called the 2nd time, things will go wrong.
Reviewed-by: Liming Wang <liming.wang@windriver.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A418728.5020506@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
It's wrong to increment @pos in stat_seq_start(). It causes some
stat entries lost when reading stat file, if the output of the file
is larger than PAGE_SIZE.
Reviewed-by: Liming Wang <liming.wang@windriver.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A418716.90209@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
It's wrong to increment @pos in t_start(), otherwise we'll lose
some entries when reading printk_formats, if the output is larger
than PAGE_SIZE.
Reported-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Reviewed-by: Liming Wang <liming.wang@windriver.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A4186FA.1020106@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
While testing syscall tracepoints posted by Jason, I found 3 entries
were missing when reading available_events. The output size of
available_events is < 4 pages, which means we lost 1 entry per page.
The cause is, it's wrong to increment @pos in s_start().
Actually there's another bug here -- reading avaiable_events/set_events
can race with module unload:
# cat available_events |
s_start() |
s_stop() |
| # rmmod foo.ko
s_start() |
call = list_entry(m->private) |
@call might be freed and accessing it will lead to crash.
Reviewed-by: Liming Wang <liming.wang@windriver.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A4186DD.6090405@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (24 commits)
tracing/urgent: warn in case of ftrace_start_up inbalance
tracing/urgent: fix unbalanced ftrace_start_up
function-graph: add stack frame test
function-graph: disable when both x86_32 and optimize for size are configured
ring-buffer: have benchmark test print to trace buffer
ring-buffer: do not grab locks in nmi
ring-buffer: add locks around rb_per_cpu_empty
ring-buffer: check for less than two in size allocation
ring-buffer: remove useless compile check for buffer_page size
ring-buffer: remove useless warn on check
ring-buffer: use BUF_PAGE_HDR_SIZE in calculating index
tracing: update sample event documentation
tracing/filters: fix race between filter setting and module unload
tracing/filters: free filter_string in destroy_preds()
ring-buffer: use commit counters for commit pointer accounting
ring-buffer: remove unused variable
ring-buffer: have benchmark test handle discarded events
ring-buffer: prevent adding write in discarded area
tracing/filters: strloc should be unsigned short
tracing/filters: operand can be negative
...
Fix up kmemcheck-induced conflict in kernel/trace/ring_buffer.c manually
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into tracing/urgent
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into tracing/urgent
|
|
Prevent from further ftrace_start_up inbalances so that we avoid
future nop patching omissions with dynamic ftrace.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
|
|
Perfcounter reports the following stats for a wide system
profiling:
#
# (2364 samples)
#
# Overhead Symbol
# ........ ......
#
15.40% [k] mwait_idle_with_hints
8.29% [k] read_hpet
5.75% [k] ftrace_caller
3.60% [k] ftrace_call
[...]
This snapshot has been taken while neither the function tracer nor
the function graph tracer was running.
With dynamic ftrace, such results show a wrong ftrace behaviour
because all calls to ftrace_caller or ftrace_graph_caller (the patched
calls to mcount) are supposed to be patched into nop if none of those
tracers are running.
The problem occurs after the first run of the function tracer. Once we
launch it a second time, the callsites will never be nopped back,
unless you set custom filters.
For example it happens during the self tests at boot time.
The function tracer selftest runs, and then the dynamic tracing is
tested too. After that, the callsites are left un-nopped.
This is because the reset callback of the function tracer tries to
unregister two ftrace callbacks in once: the common function tracer
and the function tracer with stack backtrace, regardless of which
one is currently in use.
It then creates an unbalance on ftrace_start_up value which is expected
to be zero when the last ftrace callback is unregistered. When it
reaches zero, the FTRACE_DISABLE_CALLS is set on the next ftrace
command, triggering the patching into nop. But since it becomes
unbalanced, ie becomes lower than zero, if the kernel functions
are patched again (as in every further function tracer runs), they
won't ever be nopped back.
Note that ftrace_call and ftrace_graph_call are still patched back
to ftrace_stub in the off case, but not the callers of ftrace_call
and ftrace_graph_caller. It means that the tracing is well deactivated
but we waste a useless call into every kernel function.
This patch just unregisters the right ftrace_ops for the function
tracer on its reset callback and ignores the other one which is
not registered, fixing the unbalance. The problem also happens
is .30
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: stable@kernel.org
|
|
In case gcc does something funny with the stack frames, or the return
from function code, we would like to detect that.
An arch may implement passing of a variable that is unique to the
function and can be saved on entering a function and can be tested
when exiting the function. Usually the frame pointer can be used for
this purpose.
This patch also implements this for x86. Where it passes in the stack
frame of the parent function, and will test that frame on exit.
There was a case in x86_32 with optimize for size (-Os) where, for a
few functions, gcc would align the stack frame and place a copy of the
return address into it. The function graph tracer modified the copy and
not the actual return address. On return from the funtion, it did not go
to the tracer hook, but returned to the parent. This broke the function
graph tracer, because the return of the parent (where gcc did not do
this funky manipulation) returned to the location that the child function
was suppose to. This caused strange kernel crashes.
This test detected the problem and pointed out where the issue was.
This modifies the parameters of one of the functions that the arch
specific code calls, so it includes changes to arch code to accommodate
the new prototype.
Note, I notice that the parsic arch implements its own push_return_trace.
This is now a generic function and the ftrace_push_return_trace should be
used instead. This patch does not touch that code.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
On x86_32, when optimize for size is set, gcc may align the frame pointer
and make a copy of the the return address inside the stack frame.
The return address that is located in the stack frame may not be
the one used to return to the calling function. This will break the
function graph tracer.
The function graph tracer replaces the return address with a jump to a hook
function that can trace the exit of the function. If it only replaces
a copy, then the hook will not be called when the function returns.
Worse yet, when the parent function returns, the function graph tracer
will return back to the location of the child function which will
easily crash the kernel with weird results.
To see the problem, when i386 is compiled with -Os we get:
c106be03: 57 push %edi
c106be04: 8d 7c 24 08 lea 0x8(%esp),%edi
c106be08: 83 e4 e0 and $0xffffffe0,%esp
c106be0b: ff 77 fc pushl 0xfffffffc(%edi)
c106be0e: 55 push %ebp
c106be0f: 89 e5 mov %esp,%ebp
c106be11: 57 push %edi
c106be12: 56 push %esi
c106be13: 53 push %ebx
c106be14: 81 ec 8c 00 00 00 sub $0x8c,%esp
c106be1a: e8 f5 57 fb ff call c1021614 <mcount>
When it is compiled with -O2 instead we get:
c10896f0: 55 push %ebp
c10896f1: 89 e5 mov %esp,%ebp
c10896f3: 83 ec 28 sub $0x28,%esp
c10896f6: 89 5d f4 mov %ebx,0xfffffff4(%ebp)
c10896f9: 89 75 f8 mov %esi,0xfffffff8(%ebp)
c10896fc: 89 7d fc mov %edi,0xfffffffc(%ebp)
c10896ff: e8 d0 08 fa ff call c1029fd4 <mcount>
The compile with -Os will align the stack pointer then set up the
frame pointer (%ebp), and it copies the return address back into
the stack frame. The change to the return address in mcount is done
to the copy and not the real place holder of the return address.
Then compile with -O2 sets up the frame pointer first, this makes
the change to the return address by mcount affect where the function
will jump on exit.
Reported-by: Jake Edge <jake@lwn.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Currently the output of the ring buffer benchmark/test prints to
the console. This test runs for ten seconds every ten seconds and
ouputs the result after every iteration. This needlessly fills up
the logs.
This patch makes the ring buffer benchmark/test print to the ftrace
buffer using trace_printk. To view the test results, you must examine
the debug/tracing/trace file.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
If ftrace_dump_on_oops is set, and an NMI detects a lockup, then it
will need to read from the ring buffer. But the read side of the
ring buffer still takes locks. This patch adds a check on the read
side that if it is in an NMI, then it will disable the ring buffer
and not take any locks.
Reads can still happen on a disabled ring buffer.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
The checking of whether the buffer is empty or not needs to be serialized
among the readers. Add the reader spin lock around it.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
The ring buffer must have at least two pages allocated for the
reader page swap to work.
The page count check will miss the case of a zero size passed in.
Even though a zero size ring buffer would probably fail an allocation,
making the min size check for less than two instead of equal to one makes
the code a bit more robust.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
The original version of the ring buffer had a hack to map the
page struct that held the pages of the buffer to also be the structure
that the ring buffer would keep the pages in a link list.
This overlap of the page struct was very dangerous and that hack was
removed a while ago.
But there was a check to make sure the buffer_page never became bigger
than the page struct, and would fail the compile if it did. The
check was only meaningful when we had the hack. Now that we have separate
allocated descriptors for the buffer pages, we can remove this check.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
A check if "write > BUF_PAGE_SIZE" is done right after a
if (write > BUF_PAGE_SIZE)
return ...;
Thus the check is actually testing the compiler and not the
kernel. This is useless, remove it.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
The index of the event is found by masking PAGE_MASK to it and
subtracting the header size. Currently the header size is calculate
by PAGE_SIZE - BUF_PAGE_SIZE, when we already have a macro
BUF_PAGE_HDR_SIZE to define it.
If we want to change BUF_PAGE_SIZE to something less than filling
the rest of the page (this is done for debugging), then we break
the algorithm to find the index.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Module unload is protected by event_mutex, while setting filter is
protected by filter_mutex. This leads to the race:
echo 'bar == 0 || bar == 10' \ |
> sample/filter |
| insmod sample.ko
add_pred("bar == 0") |
-> n_preds == 1 |
add_pred("bar == 100") |
-> n_preds == 2 |
| rmmod sample.ko
| insmod sample.ko
add_pred("&&") |
-> n_preds == 1 (should be 3) |
Now event->filter->preds is corrupted. An then when filter_match_preds()
is called, the WARN_ON() in it will be triggered.
To avoid the race, we remove filter_mutex, and replace it with event_mutex.
[ Impact: prevent corruption of filters by module removing and loading ]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A375A4D.6000205@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
filter->filter_string is not freed when unloading a module:
# insmod trace-events-sample.ko
# echo "bar < 100" > /mnt/tracing/events/sample/foo_bar/filter
# rmmod trace-events-sample.ko
[ Impact: fix memory leak when unloading module ]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A375A30.9060802@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
The ring buffer is made up of three sets of pointers.
The head page pointer, which points to the next page for the reader to
get.
The commit pointer and commit index, which points to the page and index
of the last committed write respectively.
The tail pointer and tail index, which points to the page and the index
of the last reserved data respectively (non committed).
The commit pointer is only moved forward by the outer most writer.
If a nested writer comes in, it will not move the pointer forward.
The current implementation has a flaw. It assumes that the outer most
writer successfully reserved data. There's a small race window where
the outer most writer could find the tail pointer, but a nested
writer could come in (via interrupt) and move the tail forward, and
even the commit forward.
The outer writer would not realized the commit moved forward and the
accounting will break.
This patch changes the design to use counters in the per cpu buffers
to keep track of commits. The counters are incremented at the start
of the commit, and decremented at the end. If the end commit counter
is 1, then it moves the commit pointers. A loop is made to check for
races between checking and moving the commit pointers. Only the outer
commit should move the pointers anyway.
The test of knowing if a reserve is equal to the last commit update
is still needed to know for time keeping. The time code is much less
racey than the commit updates.
This change not only solves the mentioned race, but also makes the
code simpler.
[ Impact: fix commit race and simplify code ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Fix the compiler error:
kernel/trace/ring_buffer.c: In function 'rb_move_tail':
kernel/trace/ring_buffer.c:1236: warning: unused variable 'event'
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vegard/kmemcheck
* 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/vegard/kmemcheck: (39 commits)
signal: fix __send_signal() false positive kmemcheck warning
fs: fix do_mount_root() false positive kmemcheck warning
fs: introduce __getname_gfp()
trace: annotate bitfields in struct ring_buffer_event
net: annotate struct sock bitfield
c2port: annotate bitfield for kmemcheck
net: annotate inet_timewait_sock bitfields
ieee1394/csr1212: fix false positive kmemcheck report
ieee1394: annotate bitfield
net: annotate bitfields in struct inet_sock
net: use kmemcheck bitfields API for skbuff
kmemcheck: introduce bitfield API
kmemcheck: add opcode self-testing at boot
x86: unify pte_hidden
x86: make _PAGE_HIDDEN conditional
kmemcheck: make kconfig accessible for other architectures
kmemcheck: enable in the x86 Kconfig
kmemcheck: add hooks for the page allocator
kmemcheck: add hooks for page- and sg-dma-mappings
kmemcheck: don't track page tables
...
|
|
With the addition of commit:
c7b0930857e2278f2e7714db6294e94c57f623b0
ring-buffer: prevent adding write in discarded area
The ring buffer may now add discarded events when a write passes
the end of a buffer page. Before, a discarded event was only added
when the tracer deliberately created one. The ring buffer benchmark
test does not handle discarded events when it reads the buffer and
fails when it encounters one.
Also fix the increment for large data entries (luckily, the test did
not add any yet).
[ Impact: fix false failure of ring buffer self test ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Many developers use "/debug/" or "/debugfs/" or "/sys/kernel/debug/"
directory name to mount debugfs filesystem for ftrace according to
./Documentation/tracers/ftrace.txt file.
And, three directory names(ex:/debug/, /debugfs/, /sys/kernel/debug/) is
existed in kernel source like ftrace, DRM, Wireless, Documentation,
Network[sky2]files to mount debugfs filesystem.
debugfs means debug filesystem for debugging easy to use by greg kroah
hartman. "/sys/kernel/debug/" name is suitable as directory name
of debugfs filesystem.
- debugfs related reference: http://lwn.net/Articles/334546/
Fix inconsistency of directory name to mount debugfs filesystem.
* From Steven Rostedt
- find_debugfs() and tracing_files() in this patch.
Signed-off-by: GeunSik Lim <geunsik.lim@samsung.com>
Acked-by : Inaky Perez-Gonzalez <inaky@linux.intel.com>
Reviewed-by : Steven Rostedt <rostedt@goodmis.org>
Reviewed-by : James Smart <james.smart@emulex.com>
CC: Jiri Kosina <trivial@kernel.org>
CC: David Airlie <airlied@linux.ie>
CC: Peter Osterlund <petero2@telia.com>
CC: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
CC: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
CC: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers-for-linus-migration' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
timers: Logic to move non pinned timers
timers: /proc/sys sysctl hook to enable timer migration
timers: Identifying the existing pinned timers
timers: Framework for identifying pinned timers
timers: allow deferrable timers for intervals tv2-tv5 to be deferred
Fix up conflicts in kernel/sched.c and kernel/timer.c manually
|
|
This a very tight race where an interrupt could come in and not
have enough data to put into the end of a buffer page, and that
it would fail to write and need to go to the next page.
But if this happened when another writer was about to reserver
their data, and that writer has smaller data to reserve, then
it could succeed even though the interrupt moved the tail page.
To pervent that, if we fail to store data, and by subtracting the
amount we reserved we still have room for smaller data, we need
to fill that space with "discarded" data.
[ Impact: prevent race were buffer data may be lost ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
I forgot to update filter code accordingly in
"tracing/events: change the type of __str_loc_item to unsigned short"
(commt b0aae68cc5508f3c2fbf728988c954db4c8b8a53)
It can cause system crash:
# echo 1 > tracing/events/irq/irq_handler_entry/enable
# echo 'name == eth0' > tracing/events/irq/irq_handler_entry/filter
[ Impact: fix crash while filtering on __string() field ]
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A35B905.3090500@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
This should be a bug:
# cat format
name: foo_bar
ID: 71
format:
...
field:int bar; offset:24; size:4;
# echo 'bar < 0' > filter
# echo 'bar < -1' > filter
bash: echo: write error: Invalid argument
[ Impact: fix to allow negative operand in filer expr ]
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A35B8DF.60400@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Atomic allocation is not needed here.
[ Impact: clean up of memory alloction type ]
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A35B898.2050607@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
It's tracing_cpumask_new that should be kfree()ed.
This causes tracing_cpumask to be freed due to the typo:
# echo z > tracing_cpumask
bash: echo: write error: Invalid argument
And subsequent reads/writes to tracing_cpuamsk will access this
already-freed tracing_cpumask, thus may lead to crash.
[ Impact: fix leak and crash when writing invalid val to tracing_cpumask ]
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A35B86A.7070608@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
LKML-Reference: <200906122115.30787.rusty@rustcorp.com.au>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
This gets rid of a heap of false-positive warnings from the tracer
code due to the use of bitfields.
[rebased for mainline inclusion]
Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
|
|
* 'for-2.6.31' of git://git.kernel.dk/linux-2.6-block: (153 commits)
block: add request clone interface (v2)
floppy: fix hibernation
ramdisk: remove long-deprecated "ramdisk=" boot-time parameter
fs/bio.c: add missing __user annotation
block: prevent possible io_context->refcount overflow
Add serial number support for virtio_blk, V4a
block: Add missing bounce_pfn stacking and fix comments
Revert "block: Fix bounce limit setting in DM"
cciss: decode unit attention in SCSI error handling code
cciss: Remove no longer needed sendcmd reject processing code
cciss: change SCSI error handling routines to work with interrupts enabled.
cciss: separate error processing and command retrying code in sendcmd_withirq_core()
cciss: factor out fix target status processing code from sendcmd functions
cciss: simplify interface of sendcmd() and sendcmd_withirq()
cciss: factor out core of sendcmd_withirq() for use by SCSI error handling code
cciss: Use schedule_timeout_uninterruptible in SCSI error handling code
block: needs to set the residual length of a bidi request
Revert "block: implement blkdev_readpages"
block: Fix bounce limit setting in DM
Removed reference to non-existing file Documentation/PCI/PCI-DMA-mapping.txt
...
Manually fix conflicts with tracing updates in:
block/blk-sysfs.c
drivers/ide/ide-atapi.c
drivers/ide/ide-cd.c
drivers/ide/ide-floppy.c
drivers/ide/ide-tape.c
include/trace/events/block.h
kernel/trace/blktrace.c
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'tracing-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
function-graph: always initialize task ret_stack
function-graph: move initialization of new tasks up in fork
function-graph: add memory barriers for accessing task's ret_stack
function-graph: enable the stack after initialization of other variables
function-graph: only allocate init tasks if it was not already done
Manually fix trivial conflict in kernel/trace/ftrace.c
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'tracing-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (244 commits)
Revert "x86, bts: reenable ptrace branch trace support"
tracing: do not translate event helper macros in print format
ftrace/documentation: fix typo in function grapher name
tracing/events: convert block trace points to TRACE_EVENT(), fix !CONFIG_BLOCK
tracing: add protection around module events unload
tracing: add trace_seq_vprint interface
tracing: fix the block trace points print size
tracing/events: convert block trace points to TRACE_EVENT()
ring-buffer: fix ret in rb_add_time_stamp
ring-buffer: pass in lockdep class key for reader_lock
tracing: add annotation to what type of stack trace is recorded
tracing: fix multiple use of __print_flags and __print_symbolic
tracing/events: fix output format of user stack
tracing/events: fix output format of kernel stack
tracing/trace_stack: fix the number of entries in the header
ring-buffer: discard timestamps that are at the start of the buffer
ring-buffer: try to discard unneeded timestamps
ring-buffer: fix bug in ring_buffer_discard_commit
ftrace: do not profile functions when disabled
tracing: make trace pipe recognize latency format flag
...
|
|
When reading the trace buffer, there is a race that when a module
is unloaded it removes events that is stilled referenced in the buffers.
This patch adds the protection around the unloading of the events
from modules and the reading of the trace buffers.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
The code to update the print formats for events requires a vprintf
format in the trace_seq. This patch adds that interface.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
TRACE_EVENT is a more generic way to define tracepoints. Doing so adds
these new capabilities to this tracepoint:
- zero-copy and per-cpu splice() tracing
- binary tracing without printf overhead
- structured logging records exposed under /debug/tracing/events
- trace events embedded in function tracer output and other plugins
- user-defined, per tracepoint filter expressions
...
Cons:
- no dev_t info for the output of plug, unplug_timer and unplug_io events.
no dev_t info for getrq and sleeprq events if bio == NULL.
no dev_t info for rq_abort,...,rq_requeue events if rq->rq_disk == NULL.
This is mainly because we can't get the deivce from a request queue.
But this may change in the future.
- A packet command is converted to a string in TP_assign, not TP_print.
While blktrace do the convertion just before output.
Since pc requests should be rather rare, this is not a big issue.
- In blktrace, an event can have 2 different print formats, but a TRACE_EVENT
has a unique format, which means we have some unused data in a trace entry.
The overhead is minimized by using __dynamic_array() instead of __array().
I've benchmarked the ioctl blktrace vs the splice based TRACE_EVENT tracing:
dd dd + ioctl blktrace dd + TRACE_EVENT (splice)
1 7.36s, 42.7 MB/s 7.50s, 42.0 MB/s 7.41s, 42.5 MB/s
2 7.43s, 42.3 MB/s 7.48s, 42.1 MB/s 7.43s, 42.4 MB/s
3 7.38s, 42.6 MB/s 7.45s, 42.2 MB/s 7.41s, 42.5 MB/s
So the overhead of tracing is very small, and no regression when using
those trace events vs blktrace.
And the binary output of TRACE_EVENT is much smaller than blktrace:
# ls -l -h
-rw-r--r-- 1 root root 8.8M 06-09 13:24 sda.blktrace.0
-rw-r--r-- 1 root root 195K 06-09 13:24 sda.blktrace.1
-rw-r--r-- 1 root root 2.7M 06-09 13:25 trace_splice.out
Following are some comparisons between TRACE_EVENT and blktrace:
plug:
kjournald-480 [000] 303.084981: block_plug: [kjournald]
kjournald-480 [000] 303.084981: 8,0 P N [kjournald]
unplug_io:
kblockd/0-118 [000] 300.052973: block_unplug_io: [kblockd/0] 1
kblockd/0-118 [000] 300.052974: 8,0 U N [kblockd/0] 1
remap:
kjournald-480 [000] 303.085042: block_remap: 8,0 W 102736992 + 8 <- (8,8) 33384
kjournald-480 [000] 303.085043: 8,0 A W 102736992 + 8 <- (8,8) 33384
bio_backmerge:
kjournald-480 [000] 303.085086: block_bio_backmerge: 8,0 W 102737032 + 8 [kjournald]
kjournald-480 [000] 303.085086: 8,0 M W 102737032 + 8 [kjournald]
getrq:
kjournald-480 [000] 303.084974: block_getrq: 8,0 W 102736984 + 8 [kjournald]
kjournald-480 [000] 303.084975: 8,0 G W 102736984 + 8 [kjournald]
bash-2066 [001] 1072.953770: 8,0 G N [bash]
bash-2066 [001] 1072.953773: block_getrq: 0,0 N 0 + 0 [bash]
rq_complete:
konsole-2065 [001] 300.053184: block_rq_complete: 8,0 W () 103669040 + 16 [0]
konsole-2065 [001] 300.053191: 8,0 C W 103669040 + 16 [0]
ksoftirqd/1-7 [001] 1072.953811: 8,0 C N (5a 00 08 00 00 00 00 00 24 00) [0]
ksoftirqd/1-7 [001] 1072.953813: block_rq_complete: 0,0 N (5a 00 08 00 00 00 00 00 24 00) 0 + 0 [0]
rq_insert:
kjournald-480 [000] 303.084985: block_rq_insert: 8,0 W 0 () 102736984 + 8 [kjournald]
kjournald-480 [000] 303.084986: 8,0 I W 102736984 + 8 [kjournald]
Changelog from v2 -> v3:
- use the newly introduced __dynamic_array().
Changelog from v1 -> v2:
- use __string() instead of __array() to minimize the memory required
to store hex dump of rq->cmd().
- support large pc requests.
- add missing blk_fill_rwbs_rq() in block_rq_requeue TRACE_EVENT.
- some cleanups.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A2DF669.5070905@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
The update of ret got mistakenly added to the if statement of
rb_try_to_discard. The variable ret should be 1 on commit and zero
otherwise.
[ Impact: fix compiler warning and real bug ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
On Sun, 7 Jun 2009, Ingo Molnar wrote:
> Testing tracer sched_switch: <6>Starting ring buffer hammer
> PASSED
> Testing tracer sysprof: PASSED
> Testing tracer function: PASSED
> Testing tracer irqsoff:
> =============================================
> PASSED
> Testing tracer preemptoff: PASSED
> Testing tracer preemptirqsoff: [ INFO: possible recursive locking detected ]
> PASSED
> Testing tracer branch: 2.6.30-rc8-tip-01972-ge5b9078-dirty #5760
> ---------------------------------------------
> rb_consumer/431 is trying to acquire lock:
> (&cpu_buffer->reader_lock){......}, at: [<c109eef7>] ring_buffer_reset_cpu+0x37/0x70
>
> but task is already holding lock:
> (&cpu_buffer->reader_lock){......}, at: [<c10a019e>] ring_buffer_consume+0x7e/0xc0
>
> other info that might help us debug this:
> 1 lock held by rb_consumer/431:
> #0: (&cpu_buffer->reader_lock){......}, at: [<c10a019e>] ring_buffer_consume+0x7e/0xc0
The ring buffer is a generic structure, and can be used outside of
ftrace. If ftrace traces within the use of the ring buffer, it can produce
false positives with lockdep.
This patch passes in a static lock key into the allocation of the ring
buffer, so that different ring buffers will have their own lock class.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1244477919.13761.9042.camel@twins>
[ store key in ring buffer descriptor ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into tracing/ftrace
|
|
Merge reason: this mini-topic had outstanding problems that delayed
its merge, so it does not fast-forward.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
