| Age | Commit message (Collapse) | Author |
|---|
|
With the removal of CONFIG_TINY_PREEMPT_RCU, rcu_preempt_process_callbacks()
is now an empty function. This commit therefore eliminates it by
inlining it.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
With the removal of CONFIG_TINY_PREEMPT_RCU, rcu_preempt_remove_callbacks()
is now an empty function. This commit therefore eliminates it by
inlining it.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
With the removal of CONFIG_TINY_PREEMPT_RCU, rcu_preempt_check_callbacks()
is now an empty function. This commit therefore eliminates it by
inlining it.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
With the removal of CONFIG_TINY_PREEMPT_RCU, show_tiny_preempt_stats()
is now an empty function. This commit therefore eliminates it by
inlining it.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
TINY_PREEMPT_RCU adds significant code and complexity, but does not
offer commensurate benefits. People currently using TINY_PREEMPT_RCU
can get much better memory footprint with TINY_RCU, or, if they really
need preemptible RCU, they can use TREE_PREEMPT_RCU with a relatively
minor degradation in memory footprint. Please note that this move
has been widely publicized on LKML (https://lkml.org/lkml/2012/11/12/545)
and on LWN (http://lwn.net/Articles/541037/).
This commit therefore removes TINY_PREEMPT_RCU.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Updated to eliminate #else in rcutiny.h as suggested by Josh ]
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
These interfaces never did get used, so this commit removes them,
their rcutorture tests, and documentation referencing them.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
Two ifdefs in kernel/rcupdate.c now have identical conditions with
nothing between them, so the commit merges them into a single ifdef.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
Systems with HZ=100 can have slow bootup times due to the default
three-jiffy delays between quiescent-state forcing attempts. This
commit therefore auto-tunes the RCU_JIFFIES_TILL_FORCE_QS value based
on the value of HZ. However, this would break very large systems that
require more time between quiescent-state forcing attempts. This
commit therefore also ups the default delay by one jiffy for each
256 CPUs that might be on the system (based off of nr_cpu_ids at
runtime, -not- NR_CPUS at build time).
Updated to collapse #ifdefs for RCU_JIFFIES_TILL_FORCE_QS into a
step-function definition as suggested by Josh Triplett.
Reported-by: Paul Mackerras <paulus@au1.ibm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
After a release or two, features are no longer experimental. Therefore,
this commit removes the "Experimental" tag from them.
Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
The __rcu_process_callbacks() invokes note_gp_changes() immediately
before invoking rcu_check_quiescent_state(), which conditionally
invokes that same function. This commit therefore eliminates the
call to note_gp_changes() in __rcu_process_callbacks() in favor of
making unconditional to call from rcu_check_quiescent_state() to
note_gp_changes().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
Given the changes that introduce note_gp_change(), rcu_start_gp_per_cpu()
is now a trivial wrapper function with only one caller. This commit
therefore inlines it into its sole call site.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
One of the calls to check_for_new_grace_period() is now redundant due to
an immediately preceding call to note_gp_changes(). Eliminating this
redundant call leaves a single caller, which is simpler if inlined.
This commit therefore eliminates the redundant call and inlines the
body of check_for_new_grace_period() into the single remaining call site.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
This commit eliminates some duplicated code by merging
__rcu_process_gp_end() into __note_gp_changes().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
Because note_gp_changes() now incorporates rcu_process_gp_end() function,
this commit switches to the former and eliminates the latter. In
addition, this commit changes external calls from __rcu_process_gp_end()
to __note_gp_changes().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
This commit converts printk() calls to the corresponding pr_*() calls.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
Because note_new_gpnum() now also checks for the ends of old grace periods,
this commit changes its name to note_gp_changes(). Later commits will merge
rcu_process_gp_end() into note_gp_changes().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
The current implementation can detect the beginning of a new grace period
before noting the end of a previous grace period. Although the current
implementation correctly handles this sort of nonsense, it would be
good to reduce RCU's state space by making such nonsense unnecessary,
which is now possible thanks to the fact that RCU's callback groups are
now numbered.
This commit therefore makes __note_new_gpnum() invoke
__rcu_process_gp_end() in order to note the ends of prior grace
periods before noting the beginnings of new grace periods.
Of course, this now means that note_new_gpnum() notes both the
beginnings and ends of grace periods, and could therefore be
used in place of rcu_process_gp_end(). But that is a job for
later commits.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
The addition of callback numbering allows combining the detection of the
ends of old grace periods and the beginnings of new grace periods. This
commit moves code to set the stage for this combining.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
This commit converts printk() calls to the corresponding pr_*() calls.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
In Steven Rostedt's words:
> I've been debugging the last couple of days why my tests have been
> locking up. One of my tracing tests, runs all available tracers. The
> lockup always happened with the mmiotrace, which is used to trace
> interactions between priority drivers and the kernel. But to do this
> easily, when the tracer gets registered, it disables all but the boot
> CPUs. The lockup always happened after it got done disabling the CPUs.
>
> Then I decided to try this:
>
> while :; do
> for i in 1 2 3; do
> echo 0 > /sys/devices/system/cpu/cpu$i/online
> done
> for i in 1 2 3; do
> echo 1 > /sys/devices/system/cpu/cpu$i/online
> done
> done
>
> Well, sure enough, that locked up too, with the same users. Doing a
> sysrq-w (showing all blocked tasks):
>
> [ 2991.344562] task PC stack pid father
> [ 2991.344562] rcu_preempt D ffff88007986fdf8 0 10 2 0x00000000
> [ 2991.344562] ffff88007986fc98 0000000000000002 ffff88007986fc48 0000000000000908
> [ 2991.344562] ffff88007986c280 ffff88007986ffd8 ffff88007986ffd8 00000000001d3c80
> [ 2991.344562] ffff880079248a40 ffff88007986c280 0000000000000000 00000000fffd4295
> [ 2991.344562] Call Trace:
> [ 2991.344562] [<ffffffff815437ba>] schedule+0x64/0x66
> [ 2991.344562] [<ffffffff81541750>] schedule_timeout+0xbc/0xf9
> [ 2991.344562] [<ffffffff8154bec0>] ? ftrace_call+0x5/0x2f
> [ 2991.344562] [<ffffffff81049513>] ? cascade+0xa8/0xa8
> [ 2991.344562] [<ffffffff815417ab>] schedule_timeout_uninterruptible+0x1e/0x20
> [ 2991.344562] [<ffffffff810c980c>] rcu_gp_kthread+0x502/0x94b
> [ 2991.344562] [<ffffffff81062791>] ? __init_waitqueue_head+0x50/0x50
> [ 2991.344562] [<ffffffff810c930a>] ? rcu_gp_fqs+0x64/0x64
> [ 2991.344562] [<ffffffff81061cdb>] kthread+0xb1/0xb9
> [ 2991.344562] [<ffffffff81091e31>] ? lock_release_holdtime.part.23+0x4e/0x55
> [ 2991.344562] [<ffffffff81061c2a>] ? __init_kthread_worker+0x58/0x58
> [ 2991.344562] [<ffffffff8154c1dc>] ret_from_fork+0x7c/0xb0
> [ 2991.344562] [<ffffffff81061c2a>] ? __init_kthread_worker+0x58/0x58
> [ 2991.344562] kworker/0:1 D ffffffff81a30680 0 47 2 0x00000000
> [ 2991.344562] Workqueue: events cpuset_hotplug_workfn
> [ 2991.344562] ffff880078dbbb58 0000000000000002 0000000000000006 00000000000000d8
> [ 2991.344562] ffff880078db8100 ffff880078dbbfd8 ffff880078dbbfd8 00000000001d3c80
> [ 2991.344562] ffff8800779ca5c0 ffff880078db8100 ffffffff81541fcf 0000000000000000
> [ 2991.344562] Call Trace:
> [ 2991.344562] [<ffffffff81541fcf>] ? __mutex_lock_common+0x3d4/0x609
> [ 2991.344562] [<ffffffff815437ba>] schedule+0x64/0x66
> [ 2991.344562] [<ffffffff81543a39>] schedule_preempt_disabled+0x18/0x24
> [ 2991.344562] [<ffffffff81541fcf>] __mutex_lock_common+0x3d4/0x609
> [ 2991.344562] [<ffffffff8103d11b>] ? get_online_cpus+0x3c/0x50
> [ 2991.344562] [<ffffffff8103d11b>] ? get_online_cpus+0x3c/0x50
> [ 2991.344562] [<ffffffff815422ff>] mutex_lock_nested+0x3b/0x40
> [ 2991.344562] [<ffffffff8103d11b>] get_online_cpus+0x3c/0x50
> [ 2991.344562] [<ffffffff810af7e6>] rebuild_sched_domains_locked+0x6e/0x3a8
> [ 2991.344562] [<ffffffff810b0ec6>] rebuild_sched_domains+0x1c/0x2a
> [ 2991.344562] [<ffffffff810b109b>] cpuset_hotplug_workfn+0x1c7/0x1d3
> [ 2991.344562] [<ffffffff810b0ed9>] ? cpuset_hotplug_workfn+0x5/0x1d3
> [ 2991.344562] [<ffffffff81058e07>] process_one_work+0x2d4/0x4d1
> [ 2991.344562] [<ffffffff81058d3a>] ? process_one_work+0x207/0x4d1
> [ 2991.344562] [<ffffffff8105964c>] worker_thread+0x2e7/0x3b5
> [ 2991.344562] [<ffffffff81059365>] ? rescuer_thread+0x332/0x332
> [ 2991.344562] [<ffffffff81061cdb>] kthread+0xb1/0xb9
> [ 2991.344562] [<ffffffff81061c2a>] ? __init_kthread_worker+0x58/0x58
> [ 2991.344562] [<ffffffff8154c1dc>] ret_from_fork+0x7c/0xb0
> [ 2991.344562] [<ffffffff81061c2a>] ? __init_kthread_worker+0x58/0x58
> [ 2991.344562] bash D ffffffff81a4aa80 0 2618 2612 0x10000000
> [ 2991.344562] ffff8800379abb58 0000000000000002 0000000000000006 0000000000000c2c
> [ 2991.344562] ffff880077fea140 ffff8800379abfd8 ffff8800379abfd8 00000000001d3c80
> [ 2991.344562] ffff8800779ca5c0 ffff880077fea140 ffffffff81541fcf 0000000000000000
> [ 2991.344562] Call Trace:
> [ 2991.344562] [<ffffffff81541fcf>] ? __mutex_lock_common+0x3d4/0x609
> [ 2991.344562] [<ffffffff815437ba>] schedule+0x64/0x66
> [ 2991.344562] [<ffffffff81543a39>] schedule_preempt_disabled+0x18/0x24
> [ 2991.344562] [<ffffffff81541fcf>] __mutex_lock_common+0x3d4/0x609
> [ 2991.344562] [<ffffffff81530078>] ? rcu_cpu_notify+0x2f5/0x86e
> [ 2991.344562] [<ffffffff81530078>] ? rcu_cpu_notify+0x2f5/0x86e
> [ 2991.344562] [<ffffffff815422ff>] mutex_lock_nested+0x3b/0x40
> [ 2991.344562] [<ffffffff81530078>] rcu_cpu_notify+0x2f5/0x86e
> [ 2991.344562] [<ffffffff81091c99>] ? __lock_is_held+0x32/0x53
> [ 2991.344562] [<ffffffff81548912>] notifier_call_chain+0x6b/0x98
> [ 2991.344562] [<ffffffff810671fd>] __raw_notifier_call_chain+0xe/0x10
> [ 2991.344562] [<ffffffff8103cf64>] __cpu_notify+0x20/0x32
> [ 2991.344562] [<ffffffff8103cf8d>] cpu_notify_nofail+0x17/0x36
> [ 2991.344562] [<ffffffff815225de>] _cpu_down+0x154/0x259
> [ 2991.344562] [<ffffffff81522710>] cpu_down+0x2d/0x3a
> [ 2991.344562] [<ffffffff81526351>] store_online+0x4e/0xe7
> [ 2991.344562] [<ffffffff8134d764>] dev_attr_store+0x20/0x22
> [ 2991.344562] [<ffffffff811b3c5f>] sysfs_write_file+0x108/0x144
> [ 2991.344562] [<ffffffff8114c5ef>] vfs_write+0xfd/0x158
> [ 2991.344562] [<ffffffff8114c928>] SyS_write+0x5c/0x83
> [ 2991.344562] [<ffffffff8154c494>] tracesys+0xdd/0xe2
>
> As well as held locks:
>
> [ 3034.728033] Showing all locks held in the system:
> [ 3034.728033] 1 lock held by rcu_preempt/10:
> [ 3034.728033] #0: (rcu_preempt_state.onoff_mutex){+.+...}, at: [<ffffffff810c9471>] rcu_gp_kthread+0x167/0x94b
> [ 3034.728033] 4 locks held by kworker/0:1/47:
> [ 3034.728033] #0: (events){.+.+.+}, at: [<ffffffff81058d3a>] process_one_work+0x207/0x4d1
> [ 3034.728033] #1: (cpuset_hotplug_work){+.+.+.}, at: [<ffffffff81058d3a>] process_one_work+0x207/0x4d1
> [ 3034.728033] #2: (cpuset_mutex){+.+.+.}, at: [<ffffffff810b0ec1>] rebuild_sched_domains+0x17/0x2a
> [ 3034.728033] #3: (cpu_hotplug.lock){+.+.+.}, at: [<ffffffff8103d11b>] get_online_cpus+0x3c/0x50
> [ 3034.728033] 1 lock held by mingetty/2563:
> [ 3034.728033] #0: (&ldata->atomic_read_lock){+.+...}, at: [<ffffffff8131e28a>] n_tty_read+0x252/0x7e8
> [ 3034.728033] 1 lock held by mingetty/2565:
> [ 3034.728033] #0: (&ldata->atomic_read_lock){+.+...}, at: [<ffffffff8131e28a>] n_tty_read+0x252/0x7e8
> [ 3034.728033] 1 lock held by mingetty/2569:
> [ 3034.728033] #0: (&ldata->atomic_read_lock){+.+...}, at: [<ffffffff8131e28a>] n_tty_read+0x252/0x7e8
> [ 3034.728033] 1 lock held by mingetty/2572:
> [ 3034.728033] #0: (&ldata->atomic_read_lock){+.+...}, at: [<ffffffff8131e28a>] n_tty_read+0x252/0x7e8
> [ 3034.728033] 1 lock held by mingetty/2575:
> [ 3034.728033] #0: (&ldata->atomic_read_lock){+.+...}, at: [<ffffffff8131e28a>] n_tty_read+0x252/0x7e8
> [ 3034.728033] 7 locks held by bash/2618:
> [ 3034.728033] #0: (sb_writers#5){.+.+.+}, at: [<ffffffff8114bc3f>] file_start_write+0x2a/0x2c
> [ 3034.728033] #1: (&buffer->mutex#2){+.+.+.}, at: [<ffffffff811b3b93>] sysfs_write_file+0x3c/0x144
> [ 3034.728033] #2: (s_active#54){.+.+.+}, at: [<ffffffff811b3c3e>] sysfs_write_file+0xe7/0x144
> [ 3034.728033] #3: (x86_cpu_hotplug_driver_mutex){+.+.+.}, at: [<ffffffff810217c2>] cpu_hotplug_driver_lock+0x17/0x19
> [ 3034.728033] #4: (cpu_add_remove_lock){+.+.+.}, at: [<ffffffff8103d196>] cpu_maps_update_begin+0x17/0x19
> [ 3034.728033] #5: (cpu_hotplug.lock){+.+.+.}, at: [<ffffffff8103cfd8>] cpu_hotplug_begin+0x2c/0x6d
> [ 3034.728033] #6: (rcu_preempt_state.onoff_mutex){+.+...}, at: [<ffffffff81530078>] rcu_cpu_notify+0x2f5/0x86e
> [ 3034.728033] 1 lock held by bash/2980:
> [ 3034.728033] #0: (&ldata->atomic_read_lock){+.+...}, at: [<ffffffff8131e28a>] n_tty_read+0x252/0x7e8
>
> Things looked a little weird. Also, this is a deadlock that lockdep did
> not catch. But what we have here does not look like a circular lock
> issue:
>
> Bash is blocked in rcu_cpu_notify():
>
> 1961 /* Exclude any attempts to start a new grace period. */
> 1962 mutex_lock(&rsp->onoff_mutex);
>
>
> kworker is blocked in get_online_cpus(), which makes sense as we are
> currently taking down a CPU.
>
> But rcu_preempt is not blocked on anything. It is simply sleeping in
> rcu_gp_kthread (really rcu_gp_init) here:
>
> 1453 #ifdef CONFIG_PROVE_RCU_DELAY
> 1454 if ((prandom_u32() % (rcu_num_nodes * 8)) == 0 &&
> 1455 system_state == SYSTEM_RUNNING)
> 1456 schedule_timeout_uninterruptible(2);
> 1457 #endif /* #ifdef CONFIG_PROVE_RCU_DELAY */
>
> And it does this while holding the onoff_mutex that bash is waiting for.
>
> Doing a function trace, it showed me where it happened:
>
> [ 125.940066] rcu_pree-10 3.... 28384115273: schedule_timeout_uninterruptible <-rcu_gp_kthread
> [...]
> [ 125.940066] rcu_pree-10 3d..3 28384202439: sched_switch: prev_comm=rcu_preempt prev_pid=10 prev_prio=120 prev_state=D ==> next_comm=watchdog/3 next_pid=38 next_prio=120
>
> The watchdog ran, and then:
>
> [ 125.940066] watchdog-38 3d..3 28384692863: sched_switch: prev_comm=watchdog/3 prev_pid=38 prev_prio=120 prev_state=P ==> next_comm=modprobe next_pid=2848 next_prio=118
>
> Not sure what modprobe was doing, but shortly after that:
>
> [ 125.940066] modprobe-2848 3d..3 28385041749: sched_switch: prev_comm=modprobe prev_pid=2848 prev_prio=118 prev_state=R+ ==> next_comm=migration/3 next_pid=40 next_prio=0
>
> Where the migration thread took down the CPU:
>
> [ 125.940066] migratio-40 3d..3 28389148276: sched_switch: prev_comm=migration/3 prev_pid=40 prev_prio=0 prev_state=P ==> next_comm=swapper/3 next_pid=0 next_prio=120
>
> which finally did:
>
> [ 125.940066] <idle>-0 3...1 28389282142: arch_cpu_idle_dead <-cpu_startup_entry
> [ 125.940066] <idle>-0 3...1 28389282548: native_play_dead <-arch_cpu_idle_dead
> [ 125.940066] <idle>-0 3...1 28389282924: play_dead_common <-native_play_dead
> [ 125.940066] <idle>-0 3...1 28389283468: idle_task_exit <-play_dead_common
> [ 125.940066] <idle>-0 3...1 28389284644: amd_e400_remove_cpu <-play_dead_common
>
>
> CPU 3 is now offline, the rcu_preempt thread that ran on CPU 3 is still
> doing a schedule_timeout_uninterruptible() and it registered it's
> timeout to the timer base for CPU 3. You would think that it would get
> migrated right? The issue here is that the timer migration happens at
> the CPU notifier for CPU_DEAD. The problem is that the rcu notifier for
> CPU_DOWN is blocked waiting for the onoff_mutex to be released, which is
> held by the thread that just put itself into a uninterruptible sleep,
> that wont wake up until the CPU_DEAD notifier of the timer
> infrastructure is called, which wont happen until the rcu notifier
> finishes. Here's our deadlock!
This commit breaks this deadlock cycle by substituting a shorter udelay()
for the previous schedule_timeout_uninterruptible(), while at the same
time increasing the probability of the delay. This maintains the intensity
of the testing.
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Steven Rostedt <rostedt@goodmis.org>
|
|
This commit fixes a lockdep-detected deadlock by moving a wake_up()
call out from a rnp->lock critical section. Please see below for
the long version of this story.
On Tue, 2013-05-28 at 16:13 -0400, Dave Jones wrote:
> [12572.705832] ======================================================
> [12572.750317] [ INFO: possible circular locking dependency detected ]
> [12572.796978] 3.10.0-rc3+ #39 Not tainted
> [12572.833381] -------------------------------------------------------
> [12572.862233] trinity-child17/31341 is trying to acquire lock:
> [12572.870390] (rcu_node_0){..-.-.}, at: [<ffffffff811054ff>] rcu_read_unlock_special+0x9f/0x4c0
> [12572.878859]
> but task is already holding lock:
> [12572.894894] (&ctx->lock){-.-...}, at: [<ffffffff811390ed>] perf_lock_task_context+0x7d/0x2d0
> [12572.903381]
> which lock already depends on the new lock.
>
> [12572.927541]
> the existing dependency chain (in reverse order) is:
> [12572.943736]
> -> #4 (&ctx->lock){-.-...}:
> [12572.960032] [<ffffffff810b9851>] lock_acquire+0x91/0x1f0
> [12572.968337] [<ffffffff816ebc90>] _raw_spin_lock+0x40/0x80
> [12572.976633] [<ffffffff8113c987>] __perf_event_task_sched_out+0x2e7/0x5e0
> [12572.984969] [<ffffffff81088953>] perf_event_task_sched_out+0x93/0xa0
> [12572.993326] [<ffffffff816ea0bf>] __schedule+0x2cf/0x9c0
> [12573.001652] [<ffffffff816eacfe>] schedule_user+0x2e/0x70
> [12573.009998] [<ffffffff816ecd64>] retint_careful+0x12/0x2e
> [12573.018321]
> -> #3 (&rq->lock){-.-.-.}:
> [12573.034628] [<ffffffff810b9851>] lock_acquire+0x91/0x1f0
> [12573.042930] [<ffffffff816ebc90>] _raw_spin_lock+0x40/0x80
> [12573.051248] [<ffffffff8108e6a7>] wake_up_new_task+0xb7/0x260
> [12573.059579] [<ffffffff810492f5>] do_fork+0x105/0x470
> [12573.067880] [<ffffffff81049686>] kernel_thread+0x26/0x30
> [12573.076202] [<ffffffff816cee63>] rest_init+0x23/0x140
> [12573.084508] [<ffffffff81ed8e1f>] start_kernel+0x3f1/0x3fe
> [12573.092852] [<ffffffff81ed856f>] x86_64_start_reservations+0x2a/0x2c
> [12573.101233] [<ffffffff81ed863d>] x86_64_start_kernel+0xcc/0xcf
> [12573.109528]
> -> #2 (&p->pi_lock){-.-.-.}:
> [12573.125675] [<ffffffff810b9851>] lock_acquire+0x91/0x1f0
> [12573.133829] [<ffffffff816ebe9b>] _raw_spin_lock_irqsave+0x4b/0x90
> [12573.141964] [<ffffffff8108e881>] try_to_wake_up+0x31/0x320
> [12573.150065] [<ffffffff8108ebe2>] default_wake_function+0x12/0x20
> [12573.158151] [<ffffffff8107bbf8>] autoremove_wake_function+0x18/0x40
> [12573.166195] [<ffffffff81085398>] __wake_up_common+0x58/0x90
> [12573.174215] [<ffffffff81086909>] __wake_up+0x39/0x50
> [12573.182146] [<ffffffff810fc3da>] rcu_start_gp_advanced.isra.11+0x4a/0x50
> [12573.190119] [<ffffffff810fdb09>] rcu_start_future_gp+0x1c9/0x1f0
> [12573.198023] [<ffffffff810fe2c4>] rcu_nocb_kthread+0x114/0x930
> [12573.205860] [<ffffffff8107a91d>] kthread+0xed/0x100
> [12573.213656] [<ffffffff816f4b1c>] ret_from_fork+0x7c/0xb0
> [12573.221379]
> -> #1 (&rsp->gp_wq){..-.-.}:
> [12573.236329] [<ffffffff810b9851>] lock_acquire+0x91/0x1f0
> [12573.243783] [<ffffffff816ebe9b>] _raw_spin_lock_irqsave+0x4b/0x90
> [12573.251178] [<ffffffff810868f3>] __wake_up+0x23/0x50
> [12573.258505] [<ffffffff810fc3da>] rcu_start_gp_advanced.isra.11+0x4a/0x50
> [12573.265891] [<ffffffff810fdb09>] rcu_start_future_gp+0x1c9/0x1f0
> [12573.273248] [<ffffffff810fe2c4>] rcu_nocb_kthread+0x114/0x930
> [12573.280564] [<ffffffff8107a91d>] kthread+0xed/0x100
> [12573.287807] [<ffffffff816f4b1c>] ret_from_fork+0x7c/0xb0
Notice the above call chain.
rcu_start_future_gp() is called with the rnp->lock held. Then it calls
rcu_start_gp_advance, which does a wakeup.
You can't do wakeups while holding the rnp->lock, as that would mean
that you could not do a rcu_read_unlock() while holding the rq lock, or
any lock that was taken while holding the rq lock. This is because...
(See below).
> [12573.295067]
> -> #0 (rcu_node_0){..-.-.}:
> [12573.309293] [<ffffffff810b8d36>] __lock_acquire+0x1786/0x1af0
> [12573.316568] [<ffffffff810b9851>] lock_acquire+0x91/0x1f0
> [12573.323825] [<ffffffff816ebc90>] _raw_spin_lock+0x40/0x80
> [12573.331081] [<ffffffff811054ff>] rcu_read_unlock_special+0x9f/0x4c0
> [12573.338377] [<ffffffff810760a6>] __rcu_read_unlock+0x96/0xa0
> [12573.345648] [<ffffffff811391b3>] perf_lock_task_context+0x143/0x2d0
> [12573.352942] [<ffffffff8113938e>] find_get_context+0x4e/0x1f0
> [12573.360211] [<ffffffff811403f4>] SYSC_perf_event_open+0x514/0xbd0
> [12573.367514] [<ffffffff81140e49>] SyS_perf_event_open+0x9/0x10
> [12573.374816] [<ffffffff816f4dd4>] tracesys+0xdd/0xe2
Notice the above trace.
perf took its own ctx->lock, which can be taken while holding the rq
lock. While holding this lock, it did a rcu_read_unlock(). The
perf_lock_task_context() basically looks like:
rcu_read_lock();
raw_spin_lock(ctx->lock);
rcu_read_unlock();
Now, what looks to have happened, is that we scheduled after taking that
first rcu_read_lock() but before taking the spin lock. When we scheduled
back in and took the ctx->lock, the following rcu_read_unlock()
triggered the "special" code.
The rcu_read_unlock_special() takes the rnp->lock, which gives us a
possible deadlock scenario.
CPU0 CPU1 CPU2
---- ---- ----
rcu_nocb_kthread()
lock(rq->lock);
lock(ctx->lock);
lock(rnp->lock);
wake_up();
lock(rq->lock);
rcu_read_unlock();
rcu_read_unlock_special();
lock(rnp->lock);
lock(ctx->lock);
**** DEADLOCK ****
> [12573.382068]
> other info that might help us debug this:
>
> [12573.403229] Chain exists of:
> rcu_node_0 --> &rq->lock --> &ctx->lock
>
> [12573.424471] Possible unsafe locking scenario:
>
> [12573.438499] CPU0 CPU1
> [12573.445599] ---- ----
> [12573.452691] lock(&ctx->lock);
> [12573.459799] lock(&rq->lock);
> [12573.467010] lock(&ctx->lock);
> [12573.474192] lock(rcu_node_0);
> [12573.481262]
> *** DEADLOCK ***
>
> [12573.501931] 1 lock held by trinity-child17/31341:
> [12573.508990] #0: (&ctx->lock){-.-...}, at: [<ffffffff811390ed>] perf_lock_task_context+0x7d/0x2d0
> [12573.516475]
> stack backtrace:
> [12573.530395] CPU: 1 PID: 31341 Comm: trinity-child17 Not tainted 3.10.0-rc3+ #39
> [12573.545357] ffffffff825b4f90 ffff880219f1dbc0 ffffffff816e375b ffff880219f1dc00
> [12573.552868] ffffffff816dfa5d ffff880219f1dc50 ffff88023ce4d1f8 ffff88023ce4ca40
> [12573.560353] 0000000000000001 0000000000000001 ffff88023ce4d1f8 ffff880219f1dcc0
> [12573.567856] Call Trace:
> [12573.575011] [<ffffffff816e375b>] dump_stack+0x19/0x1b
> [12573.582284] [<ffffffff816dfa5d>] print_circular_bug+0x200/0x20f
> [12573.589637] [<ffffffff810b8d36>] __lock_acquire+0x1786/0x1af0
> [12573.596982] [<ffffffff810918f5>] ? sched_clock_cpu+0xb5/0x100
> [12573.604344] [<ffffffff810b9851>] lock_acquire+0x91/0x1f0
> [12573.611652] [<ffffffff811054ff>] ? rcu_read_unlock_special+0x9f/0x4c0
> [12573.619030] [<ffffffff816ebc90>] _raw_spin_lock+0x40/0x80
> [12573.626331] [<ffffffff811054ff>] ? rcu_read_unlock_special+0x9f/0x4c0
> [12573.633671] [<ffffffff811054ff>] rcu_read_unlock_special+0x9f/0x4c0
> [12573.640992] [<ffffffff811390ed>] ? perf_lock_task_context+0x7d/0x2d0
> [12573.648330] [<ffffffff810b429e>] ? put_lock_stats.isra.29+0xe/0x40
> [12573.655662] [<ffffffff813095a0>] ? delay_tsc+0x90/0xe0
> [12573.662964] [<ffffffff810760a6>] __rcu_read_unlock+0x96/0xa0
> [12573.670276] [<ffffffff811391b3>] perf_lock_task_context+0x143/0x2d0
> [12573.677622] [<ffffffff81139070>] ? __perf_event_enable+0x370/0x370
> [12573.684981] [<ffffffff8113938e>] find_get_context+0x4e/0x1f0
> [12573.692358] [<ffffffff811403f4>] SYSC_perf_event_open+0x514/0xbd0
> [12573.699753] [<ffffffff8108cd9d>] ? get_parent_ip+0xd/0x50
> [12573.707135] [<ffffffff810b71fd>] ? trace_hardirqs_on_caller+0xfd/0x1c0
> [12573.714599] [<ffffffff81140e49>] SyS_perf_event_open+0x9/0x10
> [12573.721996] [<ffffffff816f4dd4>] tracesys+0xdd/0xe2
This commit delays the wakeup via irq_work(), which is what
perf and ftrace use to perform wakeups in critical sections.
Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
This patch increases the amount of output produced by the
irq_domain_mapping debugfs file by first listing all of the registered
irq domains at the beginning of the output, and then by including all
mapped IRQs in the output, not just the active ones. It is very useful
when debugging irqdomain issues to be able to see the entire list of
mapped irqs, not just the ones that happen to be connected to devices.
Signed-off-by: Grant Likely <grant.likely@linaro.org>
|
|
After refactoring the irqdomain code, there are a number of API
functions that are merely empty wrappers around core code. Drop those
wrappers out of the C file and replace them with static inlines in the
header.
Signed-off-by: Grant Likely <grant.likely@linaro.org>
|
|
The NOMAP irq_domain type is only used by a handful of interrupt
controllers and it unnecessarily complicates the code by adding special
cases on how to look up mappings and different revmap functions are used
for each type which need to validate the correct type is passed to it
before performing the reverse map. Eliminating the revmap_type and
making a single reverse mapping function simplifies the code. It also
shouldn't be any slower than having separate revmap functions because
the type of the revmap needed to be checked anyway.
The linear and tree revmap types were already merged in a previous
patch. This patch rolls the NOMAP or direct mapping behaviour into the
same domain code making is possible for an irq domain to do any mapping
type; linear, tree or direct; and that the mapping will be transparent
to the interrupt controller driver.
With this change, direct mappings will get stored in the linear or tree
mapping for consistency. Reverse mapping from the hwirq to virq will go
through the normal lookup process. However, any controller using a
direct mapping can take advantage of knowing that hwirq==virq for any
mapped interrupts skip doing a revmap lookup when handling IRQs.
Signed-off-by: Grant Likely <grant.likely@linaro.org>
|
|
Keeping them separate makes irq_domain more complex and adds a lot of
code (as proven by the diffstat). Merging them simplifies the whole
scheme. This change makes it so both the tree and linear methods can be
used by the same irq_domain instance. If the hwirq is less than the
->linear_size, then the linear map is used to reverse map the hwirq.
Otherwise the radix tree is used. The test for which map to use is no
more expensive that the existing code, so the performance of fast path
is preserved.
It also means that complex interrupt controllers can use both the
linear map and a tree in the same domain. This may be useful for an
interrupt controller with a base set of core irqs and a large number
of GPIOs which might be used as irqs. The linear map could cover the
core irqs, and the tree used for thas irqs. The linear map could
cover the core irqs, and the tree used for the gpios.
v2: Drop reorganization of revmap data
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Rob Herring <rob.herring@calxeda.com>
|
|
This patch adds a name field to the irq_domain structure to help mere
mortals understand the mappings between irq domains and virqs. It also
converts a number of places that have open-coded some kind of fudging
an irqdomain name to use the new field. This means a more consistent
display of names in irq domain log messages and debugfs output.
Signed-off-by: Grant Likely <grant.likely@linaro.org>
|
|
The LEGACY mapping unnecessarily complicates the irqdomain code and
can easily be implemented with a linear mapping. By ripping it out
and replacing it with the LINEAR mapping the object size of
irqdomain.c shrinks by about 330 bytes (ARMv7) which offsets the
additional allocation required by the linear map. It also makes it
possible for current LEGACY map users to pre-allocate irq_descs for a
subset of the hwirqs and dynamically allocate the rest as needed.
Signed-off-by: Grant Likely <grant.likely@linaro.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Rob Herring <rob.herring@calxeda.com>
|
|
Commit 98aa468e, "irqdomain: Support for static IRQ mapping and
association" introduced an API for directly associating blocks of hwirqs
to linux irqs. However, if any irq in that block failed to map (say if
the mapping functions returns an error because the irq is already
mapped) then the whole thing will fail and roll back. This is probably
too aggressive since there are valid reasons why a mapping may fail.
ie. Firmware may have a particular IRQ marked as unusable.
This patch drops the error path out of irq_domain_associate(). If a
mapping fails, then it is simply skipped. There is no reason to fail the
entire allocation.
v2: Still output an information message on failed mappings and make sure
attempted mapping gets cleared out of the irq_data structure.
Signed-off-by: Grant Likely <grant.likely@linaro.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
|
|
|
|
As we can drop rcu read lock while iterating cgroup hierarchy,
we don't have to do propagation asynchronously via workqueue.
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Instead of triggering propagation work in cpuset_attach(), we make
hotplug propagation work wait until there's no task attaching in
progress.
IMO this is more robust. We won't see empty masks in cpuset_attach().
Also it's a preparation for removing propagation work. Without asynchronous
propagation we can't call move_tasks_in_empty_cpuset() in cpuset_attach(),
because otherwise we'll deadlock on cgroup_mutex.
tj: typo fixes.
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
- Trivial: unused variable removal
- Posix-timers: Add the clock ID to the new proc interface to make it
useful. The interface is new and should be functional when we reach
the final 3.10 release.
- Cure a false positive warning in the tick code introduced by the
overhaul in 3.10
- Fix for a persistent clock detection regression introduced in this
cycle
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping: Correct run-time detection of persistent_clock.
ntp: Remove unused variable flags in __hardpps
posix-timers: Show clock ID in proc file
tick: Cure broadcast false positive pending bit warning
|
|
Pull irqdomain bug fixes from Grant Likely:
"This branch contains a set of straight forward bug fixes to the
irqdomain code and to a couple of drivers that make use of it."
* tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux:
irqchip: Return -EPERM for reserved IRQs
irqdomain: document the simple domain first_irq
kernel/irq/irqdomain.c: before use 'irq_data', need check it whether valid.
irqdomain: export irq_domain_add_simple
|
|
The first_irq needs to be zero to get a linear domain and that
comes with special semantics. We want to simplify this going
forward but some documentation never hurts.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Grant Likely <grant.likely@linaro.org>
|
|
Since irq_data may be NULL, if so, we WARN_ON(), and continue, 'hwirq'
which related with 'irq_data' has to initialize later, or it will cause
issue.
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Grant Likely <grant.likely@linaro.org>
|
|
All other irq_domain_add_* functions are exported already, and apparently
this one got left out by mistake, which causes build errors for ARM
allmodconfig kernels:
ERROR: "irq_domain_add_simple" [drivers/gpio/gpio-rcar.ko] undefined!
ERROR: "irq_domain_add_simple" [drivers/gpio/gpio-em.ko] undefined!
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Grant Likely <grant.likely@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"This contains 4 fixes.
The first two fix the case where full RCU debugging is enabled,
enabling function tracing causes a live lock of the system. This is
due to the added debug checks in rcu_dereference_raw() that is used by
the function tracer. These checks are also traced by the function
tracer as well as cause enough overhead to the function tracer to slow
down the system enough that the time to finish an interrupt can take
longer than when the next interrupt is triggered, causing a live lock
from the timer interrupt.
Talking this over with Paul McKenney, we came up with a fix that adds
a new rcu_dereference_raw_notrace() that does not perform these added
checks, and let the function tracer use that.
The third commit fixes a failed compile when branch tracing is
enabled, due to the conversion of the trace_test_buffer() selftest
that the branch trace wasn't converted for.
The forth patch fixes a bug caught by the RCU lockdep code where a
rcu_read_lock() is performed when rcu is disabled (either going to or
from idle, or user space). This happened on the irqsoff tracer as it
calls task_uid(). The fix here was to use current_uid() when possible
that doesn't use rcu locking. Which luckily, is always used when
irqsoff calls this code."
* tag 'trace-fixes-v3.10-rc3-v3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Use current_uid() for critical time tracing
tracing: Fix bad parameter passed in branch selftest
ftrace: Use the rcu _notrace variants for rcu_dereference_raw() and friends
rcu: Add _notrace variation of rcu_dereference_raw() and hlist_for_each_entry_rcu()
|
|
When param1 is enabled in EINJ but not assigned with a valid
value, sometimes it will cause the error like below:
APEI: Can not request [mem 0x7aaa7000-0x7aaa7007] for APEI EINJ Trigger registers
It is because some firmware will access target address specified in
param1 to trigger the error when injecting memory error. This will
cause resource conflict with regular memory. So It must be removed
from trigger table resources, but incorrect param1/param2
combination will stop this action. Add extra check to avoid
this kind of error.
Signed-off-by: Chen Gong <gong.chen@linux.intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
The irqsoff tracer records the max time that interrupts are disabled.
There are hooks in the assembly code that calls back into the tracer when
interrupts are disabled or enabled.
When they are enabled, the tracer checks if the amount of time they
were disabled is larger than the previous recorded max interrupts off
time. If it is, it creates a snapshot of the currently running trace
to store where the last largest interrupts off time was held and how
it happened.
During testing, this RCU lockdep dump appeared:
[ 1257.829021] ===============================
[ 1257.829021] [ INFO: suspicious RCU usage. ]
[ 1257.829021] 3.10.0-rc1-test+ #171 Tainted: G W
[ 1257.829021] -------------------------------
[ 1257.829021] /home/rostedt/work/git/linux-trace.git/include/linux/rcupdate.h:780 rcu_read_lock() used illegally while idle!
[ 1257.829021]
[ 1257.829021] other info that might help us debug this:
[ 1257.829021]
[ 1257.829021]
[ 1257.829021] RCU used illegally from idle CPU!
[ 1257.829021] rcu_scheduler_active = 1, debug_locks = 0
[ 1257.829021] RCU used illegally from extended quiescent state!
[ 1257.829021] 2 locks held by trace-cmd/4831:
[ 1257.829021] #0: (max_trace_lock){......}, at: [<ffffffff810e2b77>] stop_critical_timing+0x1a3/0x209
[ 1257.829021] #1: (rcu_read_lock){.+.+..}, at: [<ffffffff810dae5a>] __update_max_tr+0x88/0x1ee
[ 1257.829021]
[ 1257.829021] stack backtrace:
[ 1257.829021] CPU: 3 PID: 4831 Comm: trace-cmd Tainted: G W 3.10.0-rc1-test+ #171
[ 1257.829021] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007
[ 1257.829021] 0000000000000001 ffff880065f49da8 ffffffff8153dd2b ffff880065f49dd8
[ 1257.829021] ffffffff81092a00 ffff88006bd78680 ffff88007add7500 0000000000000003
[ 1257.829021] ffff88006bd78680 ffff880065f49e18 ffffffff810daebf ffffffff810dae5a
[ 1257.829021] Call Trace:
[ 1257.829021] [<ffffffff8153dd2b>] dump_stack+0x19/0x1b
[ 1257.829021] [<ffffffff81092a00>] lockdep_rcu_suspicious+0x109/0x112
[ 1257.829021] [<ffffffff810daebf>] __update_max_tr+0xed/0x1ee
[ 1257.829021] [<ffffffff810dae5a>] ? __update_max_tr+0x88/0x1ee
[ 1257.829021] [<ffffffff811002b9>] ? user_enter+0xfd/0x107
[ 1257.829021] [<ffffffff810dbf85>] update_max_tr_single+0x11d/0x12d
[ 1257.829021] [<ffffffff811002b9>] ? user_enter+0xfd/0x107
[ 1257.829021] [<ffffffff810e2b15>] stop_critical_timing+0x141/0x209
[ 1257.829021] [<ffffffff8109569a>] ? trace_hardirqs_on+0xd/0xf
[ 1257.829021] [<ffffffff811002b9>] ? user_enter+0xfd/0x107
[ 1257.829021] [<ffffffff810e3057>] time_hardirqs_on+0x2a/0x2f
[ 1257.829021] [<ffffffff811002b9>] ? user_enter+0xfd/0x107
[ 1257.829021] [<ffffffff8109550c>] trace_hardirqs_on_caller+0x16/0x197
[ 1257.829021] [<ffffffff8109569a>] trace_hardirqs_on+0xd/0xf
[ 1257.829021] [<ffffffff811002b9>] user_enter+0xfd/0x107
[ 1257.829021] [<ffffffff810029b4>] do_notify_resume+0x92/0x97
[ 1257.829021] [<ffffffff8154bdca>] int_signal+0x12/0x17
What happened was entering into the user code, the interrupts were enabled
and a max interrupts off was recorded. The trace buffer was saved along with
various information about the task: comm, pid, uid, priority, etc.
The uid is recorded with task_uid(tsk). But this is a macro that uses rcu_read_lock()
to retrieve the data, and this happened to happen where RCU is blind (user_enter).
As only the preempt and irqs off tracers can have this happen, and they both
only have the tsk == current, if tsk == current, use current_uid() instead of
task_uid(), as current_uid() does not use RCU as only current can change its uid.
This fixes the RCU suspicious splat.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Check if cpus_allowed is to be changed before calling validate_change().
This won't change any behavior, but later it will allow us to do this:
# mkdir /cpuset/child
# echo $$ > /cpuset/child/tasks /* empty cpuset */
# echo > /cpuset/child/cpuset.cpus /* do nothing, won't fail */
Without this patch, the last operation will fail.
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The test is done in set_cpus_allowed_ptr(), so it's redundant.
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
We can just use oldcs->mems_allowed.
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
- We never pass a NULL @cs to these functions.
- The top cpuset always has some online cpus/mems.
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
task_cs() will never return NULL.
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
* Rename it from files[] (really?) to cgroup_base_files[].
* Drop CGROUP_FILE_GENERIC_PREFIX which was defined as "cgroup." and
used inconsistently. Just use "cgroup." directly.
* Collect insane files at the end. Note that only the insane ones are
missing "cgroup." prefix.
This patch doesn't introduce any functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
|
|
The empty cgroup notification mechanism currently implemented in
cgroup is tragically outdated. Forking and execing userland process
stopped being a viable notification mechanism more than a decade ago.
We're gonna have a saner mechanism. Let's make it clear that this
abomination is going away.
Mark "notify_on_release" and "release_agent" with CFTYPE_INSANE.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
|
|
Some resources controlled by cgroup aren't per-task and cgroup core
allowing threads of a single thread_group to be in different cgroups
forced memcg do explicitly find the group leader and use it. This is
gonna be nasty when transitioning to unified hierarchy and in general
we don't want and won't support granularity finer than processes.
Mark "tasks" with CFTYPE_INSANE.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: cgroups@vger.kernel.org
Cc: Vivek Goyal <vgoyal@redhat.com>
|
|
Ever since commit 45f035ab9b8f ("CONFIG_HOTPLUG should be always on"),
it has been basically impossible to build a kernel with CONFIG_HOTPLUG
turned off. Remove all the remaining references to it.
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Print physical address info in a style consistent with the %pR style
used elsewhere in the kernel.
Commit 69f1d475cc did this for a similar printk in this file, but I
must have missed this one.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- Fix for yet another xattr bug which may lead to NULL deref.
- A subtle bug in for_each_descendant_pre(). This bug requires quite
specific conditions to trigger and isn't too likely to actually
happen in the wild, but maybe that just makes it that much more
nastier.
- A warning message added for silly cgroup re-mount (not -o remount,
but unmount followed by mount) behavior.
* 'for-3.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: warn about mismatching options of a new mount of an existing hierarchy
cgroup: fix a subtle bug in descendant pre-order walk
cgroup: initialize xattr before calling d_instantiate()
|
